Presentation boards

IDENTITY.LOGO.

IMPOSSIBLEPOSSIBLE

TYPE.

IMPOSSIBLEIMPOSSIBLE

IMPOSSIBLE skateboards

MaxGregory

IMPOSSIBLEIMPOSSIBLE

Futura Condensed Medium

Logo type.

Futura Condensed MediumStrikethrough

Futura Condensed MediumPantone process Cyan CStrikethrough

ImpossibleNews Gothic MTBold

ImpossibleNews Gothic MTRegular

ImpossibleNews Gothic MTItalic

Copy Type.

OUGD201Print productionBrandidentity

COLOUR.

Pantone Process Cyan Cc = 100m= 0y= 0k= 0

c = 100m= 90y= 10k= 0

Pantone Warm red Cc = 0m= 75y= 90k= 0

Pantone 123 Cc = 0m= 24y= 94k= 0

Pantone Rhodamine Red Cc = 3m= 89y= 0k= 0

Pantone 187 Cc = 0m= 100y= 79k= 20

“IT ALWAYS SEEMS

IMPOSSIBLE UNTIL IT’S

DONE.”

Below is a gradient that I have made use of for my product manual, which I de-cided on after the final crit. I felt it was more current and also gave a much stronger aesthetic with more visual appeal.

Gradient

Pantone Rhodamine Red C >Pantone 123 C

Another part of my brands identity I tried to get across was the original message that ‘nothing is impossible when skateboarding’. Hence the name, ‘impossible’ with the strike through the first two letters to give possible. to do this, I made use of slogans on my adverts meant to put across the idea of the impossible being possible

Same gradient.

IDENTITY DEVELOPMENT.This board shows the logo design and the development of an identity for my fictional skateboarding company, “Impossible skateboards’. This also looks at type choice, colour and content in order to produce an effective and rounded identity.

RANGE.


MaxGregory

OUGD201Print productionBrandrange

494857mm

POSSIBLE

55mm

POSSIBLE

54 55

IMPOSSIBLE

57

PROPOSED PRODUCT.This is the range of proposed product for Impossible skateboards designed and vectored to be placed into the product manual and to help build the brands identity. I had originally intended to print onto a board and bought a blank, however it became clear it was very difficult. I had also intended to screen print t-shirts and full size deck mock ups, however a mis-exposure of my screen flawed this.

RANGE.


MaxGregory


PRODUCED PRODUCT.This is the range of produced product for Impossible skateboards designed with the intent of being produced in college in order to add to the brands identity and range. These are mostly promotional materials however I also produced a product manual in order to show the range of products available from impossible skateboards in an inexpensive and accessible format.

MANUAL.PRODUCT MANUAL.On the left is the cover spread for the product manual I have produced to promote Impossible skateboards product range. I have printed the inner spreads for this onto graph paper to give a technical look and used clean vectors to add to this aesthetic. The use of a consistent layout throughout further adds to this and keeps the focus of the manual on the products rather than the manual itself.

PRINTED ADVERTS. On the right are two examples of promotions that could come in the form of editorial advertisments or sold prints and either way I think they would promote the product all the same.Keeping colours and general compositions similar will help with visual consistency. This will make my brand stand out alone however I think the visual of the logo could be recognised in any colour or size.

MOCK UP MANUALS.On the left are a series of photographs of mocked-up examples of my product manuals. The majority of these were bind tests, looking at which bind I wanted to use in the production of my final manual. Usually surrounding which bind gives the best finish with the resources and money available at college and in my current financial situation. Ideally I wanted a duplex stock for the cover, with a gloss orange foil block which is why I attempted to make the duplex stock myself and use the foil block available in college. However neither gave the effect I was really after so I went for something I felt had a similar visual impact.

PRINT DEVELOPMENTS.On the right are a few examples of developments of the printed advertisments. Initially, when producing these adverts I was using photography in combination with my logo and some type because I felt it gave the strongest visual impact. However I am pleased that I moved away from them and went for much simpler typographic layouts as I think these are stronger aesthetically. I think they are also more in keeping with the brand visuals.

CONTEXT.


MaxGregory

OUGD201Print productionContextual influence.

RESEARCH & INFLUENCEThis board looks at my influences throughout the project and the effect that they’ve had on my outcomes. Research was integral to this brief and I feel it has helped focus at every stage of the brief, finding out information regarding both my subject matter and different ways of dealing with it have proved invaluable, particularly on a print based brief like this one.

Above is a really brilliant example of advertising in a similar vain to the adverts I am producing. Making use of simple but really well shot photography with a slogan that’s to the point and makes you feel something (this one particularly if you were a skateboarder) I think it’s the simplicity of this image that makes it so effective, and I feel that my project benefited from having adverts like these in the environment.

MY DESIGN ATTEMPTS.Above are my attempts at using photography in conjunction with a slogan or a logo to create a feeling within the viewer that they can do anythig when they’re skating. Although they might not work quite as well as some I’ve seen, such as the one on the left, it was useful to be able to apply the knowledge gained from these and move my project on, tried, tested and moved on.

PHOTOGRAPHYI feel photography has been another huge influence on this brief. Although it can sometimes be a little hard to find really exceptional examples, there is a lot of skate photography out there and there are some really special photos. Those which capture moments and feelings from skating, I tried to get these across through my project so I think it was really useful to be able to see it portrayed through photography.

Existing skateboard branding has obviously been a very strong influence on this brief due to their relevance to my subject matter. There are some really nice examples of skate company branding and I’ve picked a few I like. ‘Enjoi’ because of it’s simplicity and ability of the logo to be applied almost anywhere and be recognised easily. Element, simply because they’re probably my favourite skate brand, with a brilliant logo and a huge range of products, from board design to clothes and so on. These have all provided me with a basis to work from.

Above is also an image of an impossible shape that pretty much sparked the entirety of my branding. Really interesting shapes that I enjoyed finding, working out and using as the basis for my project, even if they can be really difficult to work with.

RANGE.


MaxGregory


Documents

Presentation boards