Embed Size (px)
Citation preview
Department of Mechanical Engg, CET
Dr. BAIJU SASIDHARAN
Associate Professor
GENERAL INFORMATIONDOB 30-05-1972Present position Associate ProfessorPresent scale of pay 37400-67000 +9000 AGPMobile number 94 95 62 79 20E mail [email protected]
ACADEMIC DATASSC 1987 BHS Venganoor
(Board of Public Examinations)
Pre Degree 1989Govt. Arts College,Thiruvananthapuram(University of Kerala)
B Tech(Mechanical Engineering) 1996
College of EngineeringTrivandrum(University of Kerala)
M Tech(Computer AidedStructural Analysis andDesign)
2000Dept. of Ship Technology(CUSAT, Kochi, Kerala)
PhD(Friction Welding) 2017
Dept. of Ship Technology(CUSAT, Kochi, Kerala)
1
Department of Mechanical Engg, CET
Title of PhD Thesis
Experimental and Numerical Investigationson Friction Stir Welded and Friction WeldedJoints of Aluminium Alloys and SteelAlloys
EXPERIENCE
UG Teaching(21 years)
7-6-1999to
8-10-2003
Lecturer (ME)College of Engineering Trivandrum
9-10-2003to
8-8-2004
Assistant Professor (Redesignated asAssociate Professor) -MEGovt. College of Engineering ,Kozhikode
9-8-2004To
till date
Associate ProfessorCollege of Engineering Trivandrum
PG Teaching(15 years)
From 2005to
Till date
Associate ProfessorCollege of Engineering Trivandrum
AREA OF INTEREST1 Computer Aided Design2 Finite Element Methods3 Engineering Mechanics4 Mechanics of Solids5 Fluid mechanics and Hydraulic Machines6 Friction and Friction Stir Welding7 Research Methodology8 Tribology9 Lifeskills
2
Department of Mechanical Engg, CET
RESPONSIBILITIES/ POSITIONS1 UG Co ordinator, Dept. of Mechanical Engineering Since 20202 Internal expert- Doctoral committees Since 20193 Secretary, Parent Teachers Association (PTA CET) Since 2019
4 Chairman of Board of evaluations - Abdul KalamTechnological University of Kerala Since 2017
5 Module Co ordinator AICTE Accreditation 2017-20186 Subject expert in Govt. Level interview boards Since 2015
7
Professor in charge of round the clock functioningPlatinum Jubilee Computer Centre(Initiated and established with a funding of Rs. 36 Lakhsfrom Directorate of SC Development, Govt. of Keralaexclusively for SC Engineering girls students)
Since 2014
8 Co ordinator -SC/ ST Grievance redressal cell-CET Since 2014
9 Chairman of Board of evaluations - University ofKerala Since 2012
10 Professor in charge of Scholarships Since 2012
11 Co ordinator for AICTE online registration of CET 2010-2011
12 Technical experts of project under SCDD, Govt. ofKerala 2012-2014
13 Co ordinator AICTE accreditation (ME Dept.) 2012-1013
14 Auditor of STEP4U programs under DTE Kerala 2012-2016
15
Chief Co ordinator- OPES STEP4U/ RemedialTeaching(more than 100 Nos of remedial coaching/training programsto B tech students have been conducted under STEP4Uproject and spent Rs 1.25 Crore in CET for the uplifting ofstudents from Socially Economically and Educationallybackward classes from 2011 to 2016)
Since 2007
16 Joint Secretary – College of Engineering Alumniassociation (CETAA) 2006 - 2017
17 Faculty in charge of Central Computer Facility 2000- 2010
18 Served as Presiding officer for 15 Elections underElection Commission of INDIA,
1999-2020
3
Department of Mechanical Engg, CET
AWARDS AND RECOGNITIONRecognized as the key person who is working hard for the welfare ofEngineering students belongs to socially economically educationallybackward classesHonoured along with well known personalities like former SupremeCourt Chief Justice K G Balakrishnan by Mahatma Gandhi CharitableTrust Ernakulam, to appreciate the contributions given for Engineeringstudents from Socially Economically and Educationally Backwardclasses, through the program OPES under STEP4U in all the Govt.Engineering colleges
CURRENT RESEARCH TOPICCutting performance analysis of tools for cobalt based Super alloysInvestigations on tribological characteristics of biodegradable lubricantsWear rate analysis in MQCL assisted machining
RESEARCH ACTIVITIESSlNo Name of Scholar Project Title Role Status
1 Roshin TomasVerghese
Cuttingperformance
analysis of toolsfor cobalt based
Super alloys
DC member on going
2 Afsal KF
Investigations ontribological
characteristics ofbiodegradable
lubricants
DC member on going
3 Nevin NelsonWear rate analysisin MQCL assisted
machiningDC member on going
4
Department of Mechanical Engg, CET
FUNDED PROJECTSNo Title of the Project Funding Agency Amount
sanctionedif any
Staus
1 Design andFabriction of"THRIOAC"
CERD Rs. 0.5 Lakh Completed
2 Design andFabriction of"Erganomic cot forPaliative Clinic"
CERD Rs. 0.5 Lakh Completed
3 Fabrication ofFriction welding setup
CERD Rs. 0.5 Lakh Completed
SPECIAL TRAINING WORKSHOPS ATTENDEDNo Title of the Program Duration venue Organizer1 AICTE-UKIERI
Technical LeadershipDevelopment Programme
13 to 16November
2018
AICTEHeadquartersNew Delhi
AICTE,British council
of India andDudley
College UK2 AICTE-UKIERI
Technical LeadershipDevelopment Programme
20 to 23February
2019
Acharya Instituteof Technology is
affiliated toVisvesvarayaTechnological
University(VTU), Belagavi
AICTE,British council
of India andDudley
College UK
3 AICTE-UKIERITechnical LeadershipDevelopment Programme
11-13June, 2019
North-EasternHill University
(NEHU),Umshing,
Mawkynroh,Shillong,
Meghalaya-793022.
AICTE,British council
of India andDudley
College UK
5
Department of Mechanical Engg, CET
PARTICIPATION IN FACULTY DEVELOPMENTPROGRAMMESSlNo
Name of Program Sponsored by Duration No ofdays
Organizers
1 Induction Training Programfor Teachers
DTE, Govt.of Kerala
22 Nov to 3 Dec1999
14 CET
2 Advanced Technologies inInternet
DTE, Govt.of Kerala
15 to 27 January2001
13 RIT Kottayam
3 Computer aidedManufacturing and CNCProgramming
DTE, Govt.of Kerala
7 to 19 January2002
13 GEC Kannur
4 Application of MATLAB forAnalysis Design andSimulation of systems
ISTE 9 to 21 December2002
13 CET
5 3D Modelling and Animation ISTE 27October to 10November 2004
13 CET
6 Recent advances in Analysis ofmachinery Vibrations
TEQIP 6 to 18 June 2005 13 CET
7 FEM Analysis andApplications in Engineering
TEQIP 20 to 25 June2005
13 CET
8 ISO Certification ofEducational Institutions
TEQIP 19 to 22December 2005
13 CET
9 New Horizons in BiomedicalEngineering
TEQIP 15 to 26 May2006
12 CET
10 Mechatronics and MachineVision Systems
TEQIP 25 to 27 October2006
3 CET
11 Recent advances andApplication of Finite ElementAnalysis in Engineering
DTE, Govt. ofKerala
26February to 9March 2007
13 CET
12 Geo technical Investigationsfor Infrastructure Projects
CCE,CET 13-15 June 2007 3 CET
13 Environmental qualityManagement
TEQIP 14 to 16November 2007
3 CET
14 Soft Computing Techniquest TEQIP 7 to 11 January2008
5 CET
15 Recent advances in FiniteElement Modelling
AICTE 19 to 30 January2009
5 School ofEngineering,
CUSAT16 Numerical Methods for
nonlinear Finite ElementComputations
DTE, Govt. ofKerala
9 to 20 February2009
12 School ofEngineering,
CUSAT17 Finite Element Analysis for
EngineersDTE, Govt. of
Kerala14 to 19
december 200912 RIT, Kottayam
18 Recent Advances in NumericalMethods in Engineering
MHRD-AICTE
24 May to 5 June2010
14 NIT Calicut
6
Department of Mechanical Engg, CET
19 Research Methodology andOpen source ComputationalTools
DTE, Govt. ofKerala
29 November to4 December 2010
14 CET
20 Induction training for youngTeachers
DTE, Govt. ofKerala
2 to 8 March2011
7 CET
21 Open source tools inEngineering design anddocumentation
ISTE 16 to 21 May2011
6 COE,Karunagappalli
22 Recent Advances in fatigueand fracture
DTE, Govt. ofKerala
2 to 7 July2012
7 GECBH,TVPM
23 Composite materials and FiniteElement Modelling
DTE, Govt. ofKerala
25 to 29November 2013
7 CET
24 Application of Advancedcomposite materials inEngineering
DTE, Govt. ofKerala
5 to 7, December2013
3 CET
25 Recent Trends in Tribologyand Surface Characterization
CIR, Dept. ofME
16-20 April 2018 5 CET
26 Capability EnhancementTraining Programme for StaffAdvisors
DTE, Govt. ofKerala
2 to 7 July 2018 5 CET
27 FDP on Robotics AICTE 8-12 July 2019 5 MBCET, TVPM28 FDP on Advances in
NanoTechnology (online)TEQIP-II 4-6 Nov 2020
CE,Perumon
CONFERENCE / WORKSHOP/FDP ORGANIZEDSl.No.
Title/Topic Year Sponsors
1 Organising Committee member - NCTTand ICTTs(10 Nos) at CET
2007-15 CET
2 Organising Committee member- NATCON 2007 CET3 Organising Committee member- IMMM 2014 CET4 Organising Committee member -ISTE
National convention -20152015 CET
5 Organising Committee member- IMMM 2020 CET
7
Department of Mechanical Engg, CET
CONFERENCE / WORKSHOP ATTENDEDSl. No. Title/Topic Year & Duration Organisations
1 National workshop on Effect of Pollution onEnvironment
25 Nov 2004 CET
2 Attended all the NCTT and ICTTs from 2007onwards (10 Nos)
2007-2015 CET
3 DST sponsored Workshop on Marine Corrosionand its prevention
24th March 2012 Dept. of ShipTech., CUSAT
4 International Conference on Energy andEnvironment (ICEE 2013)
201312-14 December
RIT,Kottayam
5 2nd International Conference on MaterialsMechanics and Management (IMMM 2014)
201417-19 December 2014
CET
6 “Technosynod-14”, National Conference andWorkshop
201410-12 December 2014
MCETTVPM
7 International Conference on Emerging Trends inEngg. and Management (ICETEM 14)
201430-31 December 2014
SNGKOCHI
8 One day seminar on Inland Waterway Systems inIndia
4th March 2017 Dept. of ShipTech., CUSAT
9 Three day workshop on Outcome BasedEducation
14-16 February 2018 KSHEC
10 International Conference on Science andTechnology
23-25 April 2018 CUSAT
11 Inter National Conference on RecentAdvancements in Engineering and Technology
19-19 Dec 2018 LBS CE,Kasaragode
12 One day workshop on Outcome BasedEvaluation
3rd July 2019 CET
13 International Conference on Emerging Trends inEngg. and Management (ICETEM 2020)
5 to 7 March 2020 CET
TOPICS OF EXPERT TALK DELIVEREDSl.No.
Title/Topic Year Sponsors
1 Grey Relational Analysis in the FDP on Design ofExperiments for Engineers
2020 TEQIP II,CEPerumon
2 Series of Lectures on Engineering Mechanics (Remedialteaching for students in School of Engineering CUSAT)
2019 EOCCUSAT
3 Success story of OPES in CET in the STTP onCapability Enhancement Training Programme for StaffAdvisors
2018 CET, DTE,Govt. ofKerala
8
Department of Mechanical Engg, CET
BOOKS PUBLISHED/MONOGRAPH WRITTENSl.No.
Title/Topic Year Sponsors
1 C++ Tutorials in Malayalam 2011 PTA, CET2 CAD LAB Manual 2012 PTA, CET
TUTORIALS PUBLISHED IN YOUTUBE(To help students to cope up with covid 19 pandemic
situation, a You tube channel named “OPES CET” hasbeen created on March 23 , 2020 It got more than 10.5K
viewers and 206 subscribers as on 16-04-2021)Sl.No.
Topic and Number of viewers(206 subscribers as on 09-08-2020)
Views(morethan)
Subject Link
1NOTES ON NATURAL CO ORDINATE “ξ”FOR 1D ELEMENT (FEM)-FOR OPESDr. BAIJU SASIDHARAN (CET)
404 FEMhttps://youtu.be/guFt6xIJtG0
2ANALYSIS OF STEPPED BAR USING FEMPART 1- Dr. BAIJU SASIDHARAN (CET)FOR OPES
234 FEMhttps://youtu.be/ZrUkjwa1cQc
3
ELEMENT STIFFNESS MATRIX FOR 1DELEMENTS (FEM) – CLASS BYDr. BAIJU SASIDHARAN (CET) FOROPES
231 FEM
https://youtu.be/ASdosZMDTWQ
41D PROBLEM-BASED ON LOAD VECTORBY BODY FORCE (FEM) - OPES CET- Dr.BAIJU SASIDHARAN
283 FEMhttps://youtu.be/aU8SScEGneE
5ANALYSIS OF STEPPED BAR USING FEM- PART 2- Dr. BAIJU SASIDHARAN (CET)FOR OPES
211 FEMhttps://youtu.be/kYnTO8AVx-k
6STEPS IN FINITE ELEMENT ANALYSIS -CLASS BY Dr. BAIJU SASIDHARAN(CET) FOR OPES
215 FEMhttps://youtu.be/NBj92wgqUog
7DISCUSSION-1D PROBLEM-BASED ONSHAPE FUNCTION (FEM)- OPES CET-Dr. BAIJU SASIDHARAN
FEMhttps://youtu.be/uezELSHYyoI
9
Department of Mechanical Engg, CET
8ANALYSIS OF STEPPED BAR USINGFEM-PART 4 - Dr. BAIJU SASIDHARAN(CET) FOR OPES
194 FEMhttps://youtu.be/8RbH0vEHYuU
9FEM- GAUSSIAN ELIMINATIONTECHNIQUE- PART 1 - HARI KRISHNANS AND Dr. BAIJU SASIDHARAN
173 FEMhttps://youtu.be/ehP5veo0fhI
10ANALYSIS OF STEPPED BAR USING FEM- PART 3- Dr. BAIJU SASIDHARAN (CET)FOR OPES
162 FEMhttps://youtu.be/f1JFEGYGg40
11 CENTRIFUGAL PUMP - HEADS - CLASSBY SANDRA SABU (CET) FOR OPES
198 FM HM
https://youtu.be/bBmNLRUCaAU
12
NATURAL CO ORDINATES-2DELEMENTS (TRIANGULAR)-FEM-OPESCET- ARJUN K & Dr. BAIJUSASIDHARAN
156 FEM
https://youtu.be/ysZc4vAPHMM
13
POLYNOMIALS FOR FORMULATINGSHAPE FUNCTIONS IN FEM - OPES CET-SREENATH MR & Dr. BAIJUSASIDHARAN
155 FEMhttps://youtu.be/_gcTsNpm3gs
14PELTON TURBINE – OVERVIEW - CLASSBY ADITYA A SATHEESH (CET) FOROPES
149 FMAM https://youtu.be/KR0ndAbEdZI
15DERIVATION - SHAPE FUNCTION -1DELEMENT (FEA)- PART 2 - OPES- CETDr. BAIJU SASIDHARAN
149 FEMhttps://youtu.be/VDuG4Dhvars
16
SOLUTION OF A PROBLEM ONREGULATION OF SALIENT POLEALTERNATOR –BIMNA RAVEENDRAN (CETIAN) FOROPES
158
ELECTRICAL
MACHINES
https://youtu.be/fBuhMqLAixc
17NATURAL CO ORDINATES-1DELEMENTS (FEM) - Dr. BAIJUSASIDHARAN (CET) FOR OPES
152 FEMhttps://youtu.be/Vd_lTy26Jh4
18 CONCEPT OF SHAPE FUNCTION IN FEM-Dr. BAIJU SASIDHARAN(CET) FOR OPES
137 FEMhttps://youtu.be/KxtjkqUBPn4
19MORE ABOUT FE PROBLEMS WITH 1 DELEMENTS - Dr. BAIJU SASIDHARAN(CET) FOR OPES
129 FEMhttps://youtu.be/hb5YpXfZi_8
10
Department of Mechanical Engg, CET
20STIFFNESS MATRIX USING SHAPEFUNCTION FOR 1D ELEMENT (FEM) - Dr.BAIJU SASIDHARAN (CET) FOR OPES
149 FEMhttps://youtu.be/J5R1oRsOCZI
21
1D PROBLEM- FEM- GAUSSIANELIMINATION TECHNIQUE- PART 2-OPES CET- DAYA BABU & Dr. BAIJUSASIDHARAN
137 FEMhttps://youtu.be/FNrYex-gihA
221D PROBLEM IN FEM - ANALYSIS OF ATAPERED BAR USING FEA - OPES CET-Dr. BAIJU SASIDHARAN
126 FEM
https://youtu.be/GYYKXDsbyno
23KAPLAN TURBINE- PROBLEM - CLASSBY GANGA SATHEESH NAIR (CET) FOROPES
282 FMHMhttps://youtu.be/9GzJQ4w0xCg
24SPECIFIC SPEED OF CENTRIFUGALPUMP - CLASS BY UJJWALA J B (CET)FOR OPES
118 FMHM https://youtu.be/MmnJLj0sySg
25 GOVERNING OF PELTON TURBINE -NIMISHA VS (CET) FOR OPES
260 FMHM https://youtu.be/wVy9FyIqprw
26DERIVATION- SHAPE FUNCTION- 1DIMENSIONAL ELEMENT (FEA) PART 1-Dr. BAIJU SASIDHARAN (CET) FOR OPES
97 FEMhttps://youtu.be/SsMcPS-znbg
27 MULTI STAGE CENTRIFUGAL PUMPS -CLASS BY PHIL BIJU (CET) FOR OPES
162 FMHM https://youtu.be/1tHSOIJz75c
28 CAVITATION IN TURBINES - CLASS BYCHAITHRA ANIL ( CET ) FOR OPES
94 FMHMhttps://youtu.be/DYhdu_WmMeQ
29MINIMUM SPEED FOR STARTING ACENTRIFUGAL PUMP - CLASS BYSREYA SASEENDRAN (CET) FOR OPES
71 FMHMhttps://youtu.be/RZ61Q1I4bNg
30OVERVIEW ON PN JUNCTION - CLASSBY SURYA S (ALUMNA OF CET -2014-18E& C) FOR OPES CET
75
BASICSOF
ELECTRONICS
https://youtu.be/8_Plqt9VCnk
31PROBLEM SOLVING-INWARD FLOWREACTION TURBINE – CLASS BYKRISHNA PRIYA M (CET) FOR OPES
152 FMHM
https://youtu.be/KB51jmBUkxs
32AXIAL FLOW REACTION TURBINE –CLASS BY AKSHAY SUBHASH (CET)FOR OPES
95 FMHM https://youtu.be/eW680s5hEX0
33 EFFICIENCY OF A DRAFT TUBE – CLASSBY ARUNAJA GP (CET) FOR OPES
61 FMHM https://youtu.be/i1Bobwpq3CQ
11
Department of Mechanical Engg, CET
34DERIVATION – SPECIFIC SPEED OF ATURBINE - CLASS BY ARYA RAJ M (CET)FOR OPES
59 FMHMhttps://youtu.be/s6KF6IYB9Cc
35SURGE TANKS IN HYDRO ELECTRICPOWER PLANTS - CLASS BY CAROLYNANNE TOMSON (CET) FOR OPES
105 FMHMhttps://youtu.be/fDvpnPo5w-o
36CENTRIFUGAL PUMP – MULTI STAGING- CLASS BY SREYA SREEDHARAN (CET)FOR OPES
58 FMHM
https://youtu.be/vcY10HWBr88
37 REACTION TURBINE - PROBLEM -CLASS BY KIRAN U (CET) FOR OPES
29 FMHM
https://youtu.be/V_f71O5mwtA
38 ENGINEERING MECHANICS -LADDERFRICTION
52 EM https://youtu.be/DYsuIusWi5M
39WEDGE FRICTION (EM) - PART 1 , INMALAYALAM BY DR. BAIJUSASIDHARAN
54 EM https://youtu.be/jK27xHli9hk
40VIRTUAL WORK (EM)- PART 1, INMALAYALAM BY DR. BAIJUSASIDHARAN
56 EMhttps://youtu.be/2mxsFTCQKBQ
41
SOLUTION OF PROBLEMS WITHDIFFERENTIAL MANOMETERS -FLUIDMECHANICS-OPES CET-Dr. BAIJUSASIDHARAN
215 FMHM
https://www.youtube.com/watch?v=7bvxdizAU74
42IMPACT OF JET ON STATIONARY FLAT,AND CURVED PLATES- FM AND HM - Dr.BAIJU SASIDHARAN
126 FMHM
https://www.youtube.com/watch?v=1zA3bRdHNjo
43
DERIVATION-METACENTRIC HEIGHT OFFLOATING BODIES-FLUIDMECHANICS-OPES CET- Dr. BAIJUSASIDHARAN
117 FMHM
https://www.youtube.com/watch?v=4ypq6ei8FVw
44SOLUTION OF A PROBLEM - IMPACT OFJET ON MOVING UNSYMMETRICALCURVED VANE-ANUPAMA P- OPES CET
111 FMHM
https://www.youtube.com/watch?v=behSfN37zEU&t=65s
45
PROBLEM- VELOCITY ANDACCELERATION OF FLUID FLOW -FLUID MECHANICS - OPES CET- Dr.BAIJU SASIDHARAN
96 FMHM
https://www.youtube.com/watch?v=_KsT6v5N3fM&t=29s
12
Department of Mechanical Engg, CET
46
CONCEPTS ON TOTAL PRESSURE ANDCENTRE OF PRESSURE - FLUIDMECHANICS- OPES CET- Dr. BAIJUSASIDHARAN
80 FMHM
https://www.youtube.com/watch?v=wgI7dcfHw7A
47CONTINUITY EQUATION - 3D FLOW-FLUID MECHANICS- OPES CET- Dr.BAIJU SASIDHARAN
77 FMHM
https://www.youtube.com/watch?v=mst09V9D7cs
48SOLUTION OF PROBLEM RELATED TOMANOMETERS - FLUID MECHANICS-OPES CET- Dr. BAIJU SASIDHARAN
77 FMHM
https://www.youtube.com/watch?v=vRo88Zl0RZA
49
IMPACT OF JET ON SERIES OF FLATPLATES AND CURVED PLATES - FM &HM - OPES CET - Dr. BAIJUSASIDHARAN
73 FMHM
https://www.youtube.com/watch?v=7fdJN62lPUs
50
KINEMATICS- TYPES OF FLUID FLOW-CONTINUITY EQUATION- FLUIDMECHANICS- OPES CET - Dr. BAIJUSASIDHARAN
73 FMHM
https://www.youtube.com/watch?v=twdCmFH5NoM&t=2s
51MINIMUM SPEED FOR STARTING ACENTRIFUGAL PUMP-CLASS BY SREYASASEENDRAN (CET) FPR OPES
71 FMHM
https://www.youtube.com/watch?v=RZ61Q1I4bNg
52CENTRE OF BUOYANCY ANDSOLUTION TO A RELATED PROBLEM-OPES CET - Dr. BAIJU SASIDHARAN
69 FMHM
https://www.youtube.com/watch?v=c5VHK5-EisM
53
DARCY WEISBACH EQUATION-ENERGY LOSSES IN PIPES- CHEZY’SFORMULA- OPES CET- Dr. BAIJUSASIDHARAN
67 FMHM
https://www.youtube.com/watch?v=c8BPuZky2eY&t=316s
54TOTAL PRESSURE AND CENTRE OFPRESSURE - INCLINED FLAT SURFACE-FM- OPES CET- Dr.BAIJU SASIDHARAN
66 FMHM
https://www.youtube.com/watch?v=5f5PubSU3jo
55EULER AND BERNOULLI’S EQUATIONOF MOTION FOR FLUID FLOW- OPESCET- Dr. BAIJU SASIDHARAN
66 FMHM
https://www.youtube.com/watch?v=SF5AVVSv3UI&t=77s
56
IMPACT OF JET ON MOVING ,UINSYMMETRICAL CURVED PLATE -FM & HM- OPES CET- Dr. BAIJUSASIDHARAN
63 FMHM
https://www.youtube.com/watch?v=R_bJSH_o7Aw
13
Department of Mechanical Engg, CET
57FRICTIONAL LOSSES IN PIPES- DARCYWEISBACH EQUATION- FM - OPES CET -Dr. BAIJU SASIDHARAN
59 FMHM
https://www.youtube.com/watch?v=_We7QYWdu94
58VELOCITY AND ACCELERATION FOR AFLUID FLOW- FM- OPES CET- Dr. BAIJUSASIDHARAN
56 FMHM
https://www.youtube.com/watch?v=Clx853cbwZ8
59 PROBLEM - KAPLAN TURBINE - FM &HM- NOUFIYA SIYAD - OPES CET
55 FMHM
https://www.youtube.com/watch?v=p9jAPnQv6Js
60SOLUTION OF ANOTHER PROBLEM ONCENTRIFUGAL PUMP- OPES CET-NANDANA B P - 2019-’23 - IE -CET
54 FMHM https://youtu.be/NrQkhkS9sZs
61
PROBLEM - TOTAL PRESSURE ANDCENTRE OF PRESSURE - INCLINEDPLANE SURFACE- FM- OPES CET-Dr.BAIJU SASIDHARAN
52 FMHM
https://www.youtube.com/watch?v=5f5PubSU3jo
62 IMPACT OF JET ON HINGED PLATE- HM-OPES CET - Dr. BAIJU SASIDHARAN
51 FMHM
https://www.youtube.com/watch?v=N1Bxc5YcHS8&t=33s
63IMPACT OF JET ON MOVING CURVEDPLATE AT ITS CENTRE- FM & HM - OPESCET- Dr. BAIJU SASIDHARAN
44 FMHM
https://www.youtube.com/watch?v=fWlu5F0QqRQ
64
SOLUTION OF A PROBLEM BASED ONTOTAL PRESSURE AND CENTRE OFPRESSURE - OPES- CET- Dr.BAIJUSASIDHARAN
43 FMHM
https://www.youtube.com/watch?v=ZacoP0Ch_00
65IMPACT OF JET ON MOVING INCLINEDPLANE - FM & HM - OPES CET- Dr. BAIJUSASIDHARAN
43 FMHM
https://www.youtube.com/watch?v=7fdJN62lPUs
66IMPACT OF JET ON MOVING FLATPLATE - HM- OPES CET - Dr.BAIJUSASIDHARAN
35 FMHM
https://www.youtube.com/watch?v=4gtw0uaPLYo&t=79s
67
DISCHARGE THROUGH A VENTURIMETER - FM- OPES CET -Dr. BAIJUSASIDHARAN
29 FMHM https://youtu.be/nZoh8lNVajE
14
Department of Mechanical Engg, CET
68
MOMENT OF INERTIA AND RADIUS OFGYRATION - ENGINEERING MECHANICS-OPES CET-Dr. BAIJU SASIDHARAN
35 EM https://youtu.be/P8rmX6hlMs0
69
PERPENDICULAR AXIS THEOREM ANDPARALLEL AXIS THEOREM- EM- OPES CET-Dr. BAIJU SASIDHARAN
31 EMhttps://youtu.be/EQL3Ni6SAiM
70
MOMENT OF INERTIA OF A RECTANGULARSECTION- ENGINEERINGMECHANICS-OPES CET- Dr. BAIJUSASIDHARAN
41 EMhttps://youtu.be/srETTRwpVRk
71
SOLVED PROBLEM - FRANCIS TURBINE -HYDRAULIC MACHINES-OPESCET-HARISHANKAR C
35 FM HM https://youtu.be/6HUl-k65ZI4
72
MOMENT OF INERTIA OF A COMPOSITELAMINA- WORKED OUT PROBLEM-OPESCET- Dr. BAIJU SASIDHARAN
64 EM https://youtu.be/Dev7ycAMj4Q
73
BOUNDARY LAYER CONCEPTS AND ASOLVED PROBLEM - OPES CET- AROMAL AAND ANUPAMA P
39 FM HM https://youtu.be/S9eqgf6SsPE
74
MOMENT OF INERTIA OF A COMPOSITELAMINA ABOUT THE CENTROIDAL AXES -OPES CET- Dr. BAIJU SASIDHARAN
70 EMhttps://youtu.be/VAQCrVADTio
75
MOMENT OF INERTIA OF A TRIANGULARLAMINA - ENGINEERING MECHANICS -OPES CET - Dr. BAIJU SASIDHARAN
87 EM https://youtu.be/dTOcq-Durcw
76
MOMENT OF INERTIA OF A CIRCULARLAMINA- ENGINEERING MECHANICS -OPES CET - Dr. BAIJU SASIDHARAN
44 EMhttps://youtu.be/Rku_K5T_ZDc
77
MOMENT OF INERTIA OF A QUARTER OFCIRCULAR LAMINA - ENGINEERINGMECHANICS- OPES CET - VISHNUPRIYA L
84 EMhttps://youtu.be/WrW5EyWzzs4
78
MOMENT OF INERTIA OF A SEMI CIRCULARLAMINA- ENGINEERING MECHANICS-OPESCET-Dr. BAIJU SASIDHARAN
34 EMhttps://youtu.be/nYXXK8cNAuM
15
Department of Mechanical Engg, CET
RESEARCH PAPERS PUBLISHED
1
Ananthan D. Thampi, Gokul Biju, Deepkant Alokkan, Baiju Sasidharan & Rani S.Formulation and Tribological property evaluation of rice bran oil based lubricatinggrease with sebacic acid as a complexing agent,Biomass Conversion andBiorefinery (2021), https://link.springer.com/article/10.1007/s13399-021-01603-w
2
D.Thampiab, M.A.PrasanthabA.P.AnanduabE.SnehaabBaijuSasidharanabS.RaniabThe effect of nanoparticle additives on the tribological properties of variouslubricating oils – Review, Materials Today: Proceedings, 2021(https://www.sciencedirect.com/science/article/pii/S2214785321027619)
3
Ananthan D Thampi, E Sneha , BaijuSasidharan and S Rani, Effect of SiCnanoparticles on the tribological properties of rice bran oil based lubricant, IOPConference Series: Materials Science and Engineering,2021(https://iopscience.iop.org/article/10.1088/1757-899X/1114/1/012054)
4
Deepkanth A, Baiju Sasidharan, Rani S,Anandan D Thampi, Muhammed Arif M,“Feasibility Study on the Formulation of Ricebran oil based Bio Grese”,Proceedings of the 4th International Conference on Materials, Mechanics andManagement (IMMM2020), pp 165-169, ISBN 978-93-89105-41-4
5
SG Sreelekshmi, Baiju Sasidharan, SK Abraham, “Quality Prediction of FrictionWelded Joint by Machine Vision System Based Approach”, Proceedings of theAnnual International Conference on Emerging Research Areas(AICERA 2019), July 18-20, 2019, Kottayam, Kerala
6
Allan George, Baiju Sasidharan, Sathish Chandra Kumar, “Comparison ofMechanical Characteristics of Friction Stir Welded Joints of AA2195 Al-Li Alloywith AA2219”, International Journal for Scientific Research & Development| Vol.7, Issue 03, 2019 | ISSN (online): 2321-0613
7
Renjish Vijay, Rani S1, Baiju Sasidharan ,Muhammed Arif, Subin S T, “A ReviewOn Sol-Gel Coating Methods Employed To Enhance Tribological Properties”Proceedings of the 4th Kerala Technological Congress – KETCON 2019 Volume 6| Page 332
8
Renjish Vijay, Dr.Rani S, BaijuSasidharan, MuhammedArif, Abhishek Rjohn.“Evaluation of tribological properties of stainless steel by sol gel coatingtechnology.” Inicore tech 2018: International Conference on Recent Advances inEngineering andTechnology. Kasaragod, Kerala, 2018 December 18-19.
9
Abhijith, Baiju Sasidharan “Recommendation Of Optimum Process ParametersFor The Milling Of Carbon Steel Using Taguchi Analysis” International Journal ofApplied Engineering Research ISSN 0973-4562 Volume 13, Number 3 (2018) Spl.© Research India Publications. http://www.ripublication.com
16
Department of Mechanical Engg, CET
10
S Leslie, B Sasidharan,”Process parameter optimization of friction welding of Al6061 with flat-convex interface geometry”,International Journal of EngineeringResearch & Technology 5, 334-338, ISSN: 2278-0181http://www.ijert.org,IJERTV5IS090224, Vol. 5 Issue 09, September-2016
11
Baiju Sasidharan, Narayanan.K.P, Anoop .C.Chandran, “Experimentalinvestigations on Tensile and Microstructural Characteristics of Friction WeldedJoints from Al 6061/Al 6063” , Proc. of National conference on TechnologicalTrends (NCTT-15), Tvm, Sept.2015, pp. 1648-1653.
12
Baiju Sasidharan, Narayanan.K.P, Nick Franklin Antony “Numerical Modelling ofthe Residual Stress Developement in a Friction Welded Dissimilar Welded Joint”,Proc. of the 15th National Conference on Technological Trends, NCTT 2014,22-23 Aug. 2014, Tvm, pp. 1594-1599.
13
Baiju Sasidharan, Narayanan.K.P, Darwin.K., “A Rotary Friction Welding Setupfrom a Conventional Lathe”, Proc. of the National Conference & Workshop onAdvances in Materials and Advances in Bioprocess Engineering, TECHYNOD'14,10-12 Dec. 2014, pp. 152-163.
14
Baiju Sasidharan, Dr.K.P.Narayanan, Thanoj Surendran, Comparative study onhardness, torsion and microstructural characteristics of Friction welded joints of Al6061 rod formed with various interface geometry, International journal of Designand Manufacturing Technology (IJDMT), ISSN 0976 – 6995 (print) ISSN 0976 –7002 (online) volume 5, issue 3, September - December (2014), pp. 115-120
15
Baiju Sasidharan, Dr.K.P.Narayanan, Prakash.R.S, “Tensile and Microstructuralcharacterstics of DCSP TIG welded and Friction Stir Welded AA2219 Aluminumalloy’’. International Journal Of Design & Manufacturing Technology, vol 5, pp121-129, Sep-Dec 2014.
16
Baiju Sasidharan, Narayanan.K.P, Prakash.R.S.: “Tensile and MicrostructuralCharacteristics of AC Square wave welded and DCSP welded AA2219 AluminiumAlloys”, IMMM 2014 , Proc.of 2nd International Conference on MaterialsMechanics Management, pp. 722-728.
17
Baiju Sasidharan, Narayanan.K.P, Sreejith.S: “Mechanical and PhysicalCharacteristics of Friction Welded AL6161 rod with various tapered interfacegeometry”, IMMM 2014, Proc.of 2 nd International Conference on MaterialsMechanics Management, pp.783-788.
18
Baiju Sasidharan, Dr.K.P.Narayanan And Aneesh.K.N , A Comparative Study ofTensile And Microstructural Characteristics Of Friction Welded Joints AndConventionally Welded Joints Of Aluminium Alloy 6061, IJIRSET, ISSN (Online): 2319 - 8753 ISSN (Print) : 2347 – 6710
17
Department of Mechanical Engg, CET
19
Baiju Sasidharan, Narayanan.K.P, R.Arivazhakan, “Influence of Interface surfaceGeometries in the Tensile Characteristics of Friction Welded Joints fromAluminium Alloys', International Journal of Innovative Research in Science,Engineering and technology, vol.2, spl. Issue 1, Dec. 2013(ICEE 2013), pp.786-793.
20
Baiju Sasidharan, Athira Satheesh, N. R. Jaget Babu , “Numerical Modeling andExperiment on Rotary Friction Welding Process,” 12th National Conference onTechnological Trends-NCTT-2011 , 30th Nov-1st Dec 2011, College of Engineering,Trivandrum.
EXTRACARRICULAR ACTIVITIESSl. No. Particulars Position Year
1 Cultural Programs in the college Judge 2004 to till date2 College Magazine 2010 Staff Editor 20103 Canteen Development Committee Executive member 2007 – till date4 Engineering College Hostel Administration In charge of C-Block 2011-20165 OPES under STEP4U –Govt of Kerala Advisor and auditor 2011- till date6 MG University examinations Question paper
setter, Examiner2010 onwards
7 M Tech Allotment (All Govt. Colleges) Scruitinizer 2018
COMMUNITY OUT REACH IN SOCIETYSl. No. Particulars Role Year
1 Key role in organizing meeting to rememberthe supreme sacrifice of Gallant Martyr ofKargil War , Capt. R. Jerry Prem Raj VrC
Founder,Capt. R. Jerry Prem Raj VrC
foundation, Venganoor
From2000
2 Active in organizations functioning for theacademic development of SC students
Speaker as well as Sponsorof Cash awards to
meritorious students fromSC community
From2005
3 Management of School developmentactivities-LPS Punkulam
Alumni as well as executivemember of SMC
From2012
4 Active in Alumni Association of VPHSSVenganoor
Chief patron for SSC batch From2017
18
Department of Mechanical Engg, CET
Achievements in Career
1. Successfully managed Central computer Facility of CET for more than 10years
2. Due to my strong efforts and by the support of higher officials I could conductmore than 10 Nos. of orientation programs for the Engineering students belongsocially, economically and educationally backward classes , in Trivandrumdistrict under the sponsorship of TEQIP, PTA etc. In that programme, all thestudents had been provided with course materials, light refreshments, busfacilities etc. Professors, Qualified Lab staff , M Tech students, Academicallyexcelling B Tech final year students were the tutors of this training programmewithout accepting any remuneration.
More than 40 students who attended the programs got placements in reputedcompanies (IOC, MRF, ITC, Infosys, Accenture, TCS, CTS etc) in the year2011. In addition, one student got admission in IIM Culcutta, one gotadmission in IIT Kanpur and 3 nos. of students got admission in NITs. In2012, more than 30 students got placements in reputed companies. More than10 students qualified for admission to M Tech programs.
Based on the above result, Government of Kerala has started such programsin all Government Engineering colleges by accepting the orientation programsin CET as a model by naming the program “OPES under STEP4U”. Anamount of Rs 2.5 Crore has been sanctioned from SC/ST development fundfor the said program. In that, Rs 1.25 Crore has been spent to SC and STstudents in CET to support their studies. Through the sponsorship all the SCand ST students have been provided with course materials. All the SC and STstudents, who had stayed in outside hostel by paying rent, have been providedwith accommodation charges. All the day scholar students who belong to SCand ST community have been provided with travelling allowances. All thestudents , irrespective of cast who had attended the programmes have beenprovided with refreshments. All the tutors irrespective of students andteachers, have been provided with honorarium for engaging classes. Theprogramme could develop motivation to weaker students to improve theiracademics. Also the programme gave motivation to academically excellingstudents to develop their skill for presentation and teaching, which helpedthem to acquire jobs in reputed organizations like IOC, BPCL, ONGC etc aswell as helped them to acquire admissions for higher studies in institutions like
19
Department of Mechanical Engg, CET
IITs and NITs. I could reduce the failure rate of SC and ST studentsconsiderably by these training programs.
In 2016 the funding from the Government was stopped. But due to my specialinterest and dedicated efforts, the same has been continuing by the sponsorshipof Rs25000/- from PTA per year, only to provide refreshments for thestudents who are attending orientation classes.
In 2018, 2019 and 2020, with the special interest from the Principal I havealso initiated orientation programmes exclusively for Lateral entry students.These programme are now continuing . The are also helping many LE studentsto build their confidence for passing examinations.
Still, I am maintaining good relations with all the students who had attendedOPES since 2007. Some among them who had been employed in reputedinstitutions are voluntarily helping poor students in CET with my request andrecommendations. I believe that God has given me the opportunity to upliftmany students, especially from financially poor backgrounds, through suchorientation programmes.
3. Guided more than 13 B Tech Projects and 12 M Tech thesises. Alsoevaluated more than 30 Nos. of M Tech thesis in MG, University of Keralaand Dr. Abdul Kalam Technologcal University.
4. Published 20 technical papers
5. Successfully carried out Traffic Management system during the visit by ThePresident of India, Sri. Pranab Mugharji to inaugurate Patinum JubileeCelebrations of College of Engineering Trivandrum
6. Participated the address and interactive session of Dr. A P J Abdul Kalamwith students and teachers in College of Engineering Trivandrum
7. Associated with all the Heads of Departments, Principals in CET and all theDirectors of Technical Education since 2000 in various students welfareactivities.
8. Established a Computer centre at CET, exclusively for girls, at Ladies hostel ,with the sponsorship of Rs 36.47 Lakhs from SCDD, f Government of Kerala.
20
Department of Mechanical Engg, CET
9. Acquired PhD from CUSAT, under the supervision of Dr. Narayanan at Dept.of Ship Technology.
10. I have been maintaining a good relationship with all the Principals, all thedepartment heads, Staff advisors in all the departments since 2007.
11. I have been maintaining a good relationship with all the Directors of TechnicalEducation since 2010 to till date.
12. Could help various NGOs and NSS volunteers for flood relief activities inKerala.
Major strengths:
1. Hardworking, Dedicated, Willing to motivate and help poor students,Ready to take permitted risks for the welfare of students from socially,economically and educationally backward classes
Major Weaknesses:
1. Slightly short-tempered, Find very difficult to manage personal matterswithin the time available. Cannot say “no” to deserving students who needany type of help for their academic activities.
21
