Prepking 2B0-011 Exam Questions

8/6/2019 Prepking 2B0-011 Exam Questions

1/11

www.Prepking.com

Exam : Enterasys Networks 2B0-011

Title : ES Router Configuration

Version : R6.1


2/11

www.Prepking.com

Prepking - King of Computer Certification

Important Information, Please Read Carefully

Other Prepking products

A) Offline Testing engine

Use the offline Testing engine product to practice the questions in an exam environment.

B) Study Guide (not available for all exams)

Build a foundation of knowledge which will be useful also after passing the exam.

Latest Version

We are constantly reviewing our products. New material is added and old material is

updated. Free updates are available for 90 days after the purchase. You should check yourmember zone at Prepking and update 3-4 days before the scheduled exam date.

Here is the procedure to get the latest version:

1.Go towww.Prepking.com

2.Click on Member zone/Log in (right side)

3. Then click My Account

4.The latest versions of all purchased products are downloadable from here. Just click the

links.

For most updates,it is enough just to print the new questions at the end of the new version, not the whole

document.

Feedback

If you spot a possible improvement then please let us know. We always interested in

improving product quality.

Feedback should be send to [email protected]. You should include the following:

Exam number, version, page number, question number, and your login ID.

Our experts will answer your mail promptly.

Copyright

Each PDF file contains a unique serial number associated with your particular name and

contact information for security purposes. So if we find out that a particular PDF file is

being distributed by you, Prepking reserves the right to take legal action against youaccording to the International Copyright Laws.

Explanations

This product does not include explanations at the moment. If you are interested in

providing explanations for this exam, please contact [email protected].


3/11

www.Prepking.com

1. Which two L3 multicast routing protocols does the X-Pedition Router support?

A. PIM-SM

B. IGRP

C. EIGRP

D. DVMRP

Answer:AD

2. What are the two Queuing Management policies on the X-Pedition Router?

A. Strict Priority, Control Policy

B. Control Policy, Precedence Policy

C. Strict Priority, Weighted Fair Queuing

D. Control Policy, Weighted Fair Queuing

Answer: C

3. During the boot process, what are all the physical ports initially added to?

A. default VLAN

B. configured VLAN

C. protocol-based VLAN

D. Physical ports are not detected during boot process

Answer:A

4. What is the second step to gain access to an X-Pedition Router when the password is unknown?

A. Copy the startup file to a backup

B. Power cycle the router

C. Press CTRL+ALT+DEL

D. Rename the active file to bootup

Answer:A

5. When an L3 interface is created on the X-Pedition Router and associated with a single port, which type of

VLAN is created?

A. Implicit Port based

B. Implicit Subnet based

C. Explicit Bridged-Protocol basedD. No VLAN is created or required

Answer: B

6. Which two types of VLAN ports are supported on the X-Pedition Router?

A. Access and Full Duplex

B. Control and Hybrid

C. Trunk and Control


4/11

www.Prepking.com

D. Access and Trunk

Answer: D

7. Which one of the following statements best describes the L2 operation of the X-Pedition Router?

A. It acts as a Store and Forward switch.

B. It acts as a Simple Cut-Through switch.

C. It acts as an Adaptive Cut-Through switch.

D. It acts as a Store and Cut-Through switch.

Answer:A

8. Which two of the following descriptions are characteristics of the X-Pedition Router?

A. Routing is performed by hardware

B. The addition of new interfaces affects routing performance

C. Forwarding and lookups are performed on each individual module

D. Implementing Quality of Service and/or security Access Control Lists decreases performance

Answer:AC

9. What of the following would cause the X-Pedition Router to go into Boot Prom Mode?

A. a loss of power

B. an invalid system image during bootup

C. an invalid startup configuration during bootup

D. Removing the PCMCIA card when the control module is operating

Answer: BD

10. What is the slot numbering scheme for the XP8000 (formerly the SSR8000)?

A. bottom left slot 0 to top right slot 7

B. bottom left slot 0 to top right slot 8

C. bottom right slot 0 to top left slot 7

D. bottom right slot 0 to top left slot 8

Answer:A

11. Which type of VLAN does the X-Pedition Router define that works at L3?

A. SNA

B. IP and IPXC. DECnet and IPv6

D. Bridged-Protocols

Answer: B

12. Which of the following protocols does the X-Pedition Router route?

A. IP, IPX

B. IP only; all other protocols bridged


5/11

www.Prepking.com

C. IP, IPX, DECnet, and Vines; all other protocols bridged

D. IP, IPX and AppleTalk routed by ASICs; DECnet and Vines routed by software

Answer:A

13. How many Queue Priority Levels are on the router?

A. 1

B. 2

C. 3

D. 4

Answer: D

14. What is the first step to gain access to an X-Pedition Router when the password is unknown?

A. Press the ESC key

B. Power cycle the router and press the ESC key to enter BootROM mode.

C. Press CTRL+ALT+DEL

D. Rename the active file to bootup

Answer: B

15. Which two methods can be used to load an operational system image to the X-Pedition Router?

A. Load from a file on an FTP Server

B. Load from a file on a TFTP Server

C. Load from a file in the pc-flash/boot/ directory

D. Load from a file in the in the int-flash/cfg/ directory

Answer: BC

16. What is the X-PEDITION Router's default metric for redistributing routes into RIP?

A. 0

B. 1

C. 14

D. 16

Answer: D

17. What is the default output-mac-encapsulation for an IPX interface on the X-Pedition Router?

A. ethernet_iiB. ethernet_snap

C. ethernet_802.2

D. ethernet_802.3

Answer:A

18. Which of the following types of vlans are supported?

A. ip, ipx, icmp, and arp


6/11

www.Prepking.com

B. ipx, dec, apollo, and net-bios

C. mac-based, policy-based, ip and ipx

D. ip, ipx, port-based, and bridged-protocols

Answer: D

19. Which two types of VLANs may be created on the X-Pedition Router?

A. Trunk

B. Access

C. Port-Based

D. Protocol-Based

Answer: CD

20. Which command in enable mode displays the files in the int-flash/cfg/ directory?

A. file dir slot0:

B. system dir slot0:

C. file dir bootflash:

D. system show bootflash:

Answer: C

21. Which command displays the detailed information of all RIP packets sent and received?

A. rip trace sent packets

B. rip trace received request

C. rip trace packets detail

D. rip trace packets sent-received

Answer: C

22. What are the three major steps required to create a L3 Protocol-based VLAN?

A. Create the VLAN, add physical ports, and assign a policy

B. Create the VLAN, make the trunk port, and assign a policy

C. Create the VLAN, make the trunk port, and add an IP address to the VLAN

D. Create the VLAN, add physical ports to the VLAN, and add IP/IPX address to the VLAN

Answer: D

23. Which command can change the X-Pedition Router system contact name to "User One?A. set User_One system name

B. set system name "User One"

C. system set contact "User One"

D. system set administrator User_One

Answer: C

24. Which command displays the contents of a stored configuration file on the monitor screen?


7/11

www.Prepking.com

A. file type

B. file show

C. system show

D. system type

Answer:A

25. What does the command system show version display?

A. the printed circuit board revision

B. the image selected for next boot

C. the Boot Prom version and software version

D. the hardware and software version of the Line Cards

Answer: C

26. Which command example enables RIPv2 on an interface?

A. rip add 172.16.1.1 version 2

B. rip set 172.16.1.1 version 2

C. rip add interface 172.16.1.1 version 2

D. rip set interface 172.16.1.1 version 2

Answer: D

27. Which CLI command defines an ospf area as a Stub Area?

A. ospf set area stub

B. ospf add interface stub

C. ospf create stub-area

D. interface set ospf area stub

Answer:A

28. In bootprom mode, which command displays the X-Pedition Router configuration files on the internal

flash?

A. ls /bootup/pc-flash/

B. ls /int-flash/cfg/

C. file dir int-flash/cfg/

D. system show bootup/cfg/Answer: B

29. Which command implements QoS weighted Fair Policy?

A. qos set queuing-policy weighted-fair

B. set qos queuing-policy weighted-fair

C. queuing-policy set qos weighted-fair

D. set weighted-fair queuing-policy qos


8/11

www.Prepking.com

Answer:A

30. Which command (from Enable mode) saves the current running configuration to the startup

configuration file?

A. save active to startup

B. copy active to startup

C. copy scratchpad to startup

D. copy running-config to startup-config

Answer: B

31. Which prompt indicates Enable mode?

A. >

B. #

C. !

D. (enable)

Answer: B

32. Which command sets access privileges for remote SNMP management?

A. system set snmp community

B. set community snmp privilege

C. snmp set community privilege < keyword>

D. snmp set target community status enable

Answer: C

33. Which command displays the IP Route Table on the X-Pedition Router?

A. ip show routes

B. show routes all

C. show ip route-table

D. ip-router show route-table

Answer:A

34. Which command copies the default startup file to a backup file in ROM Monitor mode?

A. cp /startup/cfg /backup/cfg

B. copy /startup.cfg /backup.cfgC. cp /int-flash/cfg/startup /int-flash/cfg/backup

D. copy /int-flash/cfg/startup /int-flash/cfg/backup

Answer: C

35. When multiple images are on an X-Pedition Router, which command selects the next boot image?

A. system select image

B. system image choose


9/11

www.Prepking.com

C. system choose version

D. system image select version

Answer: B

36. Which command example configures a static route on the X-Pedition router?

A. ip add route 172.16.20.1/24 gateway 172.16.10.1

B. ip add route 172.16.20.1/24 nexthop 172.16.10.1

C. ip create route 172.16.20.1/24 gateway 172.16.10.1

D. ip create route 172.16.20.1/24 nexthop 172.16.10.1

Answer:A

37. Which CLI command is used to create the OSPF backbone?

A. ospf create area backbone

B. ip-router create ospf area 0.0.0.0

C. interface create ospf area backbone

D. ospf area 0.0.0.0 create interface

Answer:A

38. Which of the following commands will configure RIP on an IPX interface?

A. rip add interface all

B. rip add interface

C. rip add interface

D. no command is required, rip starts when the ipx interface is created

Answer: D

39. Which CLI command defines an OSPF router-id?

A. global set router-id

B. ip-router global set router-id

C. interface set router-id global

D. router-id set interface global

Answer: B

40. Which command displays the output of the RIP Trace command on the terminal monitor?

A. rip trace onB. rip trace start

C. set rip trace-state on

D. ip-router set trace-state on

Answer: D

41. Which CLI command is necessary to begin the OSPF process?

A. start ospf


10/11

www.Prepking.com

B. ospf start

C. ospf set enable

D. enable ospf state on

Answer: B

42. Which CLI command associates an interface to an OSPF area?

A. area add interface

B. interface set to-area

C. ospf add interface to-area

D. interface add ospf to-area

Answer: C

43. Which CLI command would configure an IP address to the loopback interface?

A. interface add ip lo0 address-netmask

B. interface create ip lo0 address-netmask

C. interface set ip loopback0 address-netmask

D. ip add interface loopback0 address-netmask

Answer:A

44. Which X-Pedition Router command copies the startup configuration file to a server?

A. copy startup to tftp-server

B. copy active to

C. copy startup to

D. copy active to tftp-server

Answer:A

45. Which method can be used to enter Boot Prom mode on the X-Pedition Router?

A. Press ^C keys while booting

B. Press ^Z keys while booting

C. Press ESC key while booting

D. Type Boot-Prom command in Enable mode

Answer: C

46. Which command is used to transfer an image to the X-Pedition Router?A. copy ftp flash

B. copy image flash

C. system image add tftp-server file-name

D. system ftp image

Answer: C

47. Which command example configures a default route on the X-Pedition Router?


11/11

100% Pass Guaranteed or Full RefundWord to Word Real Exam Questions from Real Test

Buy full version of exam from this link belowhttp://www.prepking.com/2B0-011.htm

Documents

Prepking 2B0-011 Exam Questions