Upload
duongdang
View
216
Download
4
Embed Size (px)
Citation preview
Premium Yacht Paint Solutions
Disclaimer: The information given in this sheet is not intended to be exhaustive. Any person using this product without first making further enquiries as to the suitability of these products for the intended purpose does so at their own risk and we can
accept no responsibility for the performance of the product or for any loss or damage (other than death or personal injury resulting from negligence) arising out of such use. The information contained in this sheet is liable to modification from time to time
in the light of experience and our policy of continuous development.
All trademarks mentioned in this publication are owned by, or licensed to, the AkzoNobel group of companies. © AkzoNobel 2016
ECoNEA™ is a trademark of Johnson & Johnson.. SKU Catalog/USA 2016
International Paint Ltd. 6001 Antoine Dr. Houston, TX USA 77091 Tel: (713) 682-1711 Technical Support Tel: 1-800-468-7589
Fax: (713) 684-1301 Email: [email protected]
Cetol® MarineCetol Marine with Next Wave™ UV-absorbing technology is a durable
translucent protective wood finish for use above the waterline on interior
and exterior woods. Next Wave technology is a unique UV package of
advanced Ultra Violet absorbers that provide greater protection, durability
and longevity. Cetol Marine has excellent weathering properties and allows
for the natural expansion and contraction of wood which prevents Cetol
Marine from cracking. Cetol Marine is also micro-porous, allowing moisture
to escape from the wood which will prevent blistering and flaking of the
finish. Cetol Marine is an easy to apply, low maintenance alternative to
wood oils and other wood treatments.
n Cetol Marine produces an attractive dark amber appearance on wood.
n Cetol Marine Light produces a lighter amber appearance on wood.
n Cetol Marine Natural Teak has a rich golden color on wood.
n Cetol Marine Gloss provides a high-gloss, hard-wearing, UV protection
and is developed as a topcoat for Cetol Marine, Cetol Marine Light and
Cetol Marine Natural Teak.
Interlux® Wood Solutions
InterProtect® Primers with Micro-Plates®InterProtect primers with Micro-Plates can be used above and below
waterline and on all substrates. Micro-Plate® Technology creates an
overlapping barrier to help stop water migration through the coating
reducing water migration through the epoxy to the hull surface which
could lead to blistering.
Gray Y2000E White Y2002E Gray YPA423KIT
Perfection® PlusA high performance, two-part clear polyurethane, Perfection
Plus delivers the ultimate in performance longevity resistance.
The chemical cure urethane formulation combines with a best-
in-class UV and HALS package to offer outstanding chemical
and abrasion resistance and superb gloss and gloss retention
that lasts four times longer than conventional one-part varnishes.
Schooner® GoldThis product offers a higher film build per coat that allows both
professional applicator and boat owners to achieve great
results faster and in fewer coats. This ‘thicker’ varnish will
require thinning, in most conditions, to achieve optimum flow.
Schooner Gold has shown to out-perform other leading brands
and will offer superb longevity and durability.
Schooner® 96Combines the very best of classic varnish craftsmanship with
the newest technology. Schooner Varnish contains ultra-violet
filters to screen the sun's damaging rays for remarkable
durability, excellent water resistance and silky application.
Superior self-leveling property and a bright, clear, high-gloss
finish with the traditional golden color.
Compass® ClearCompass Clear is a highly durable one-part polyurethane gloss
varnish that contains a unique combination of ultra-violet
additives, HALS, surface stabilizers and antioxidants to ensure
long-term gloss and clarity. Polyurethane resin adds incredible
abrasion, chemical and water resistance. Superior leveling
properties along with silky application allows you to achieve a
professional, long lasting finish. Compass Clear is suitable for
all internal and external woods, and can be applied directly to
oily timber, such as teak.
Goldspar® Satin 60A modified polyurethane, low luster varnish designed for
application to interior wood surfaces. It produces a warm, rich
satin sheen finish that resists scratches and stains and applies
easily enough to yield truly professional results by either brush
or spray. Goldspar Satin Varnish 60 is ideal anywhere a low
luster finish is desired, such as cabin soles, cabinets, counters
and tables.
Premium Teak RestorerCleans, restores and brings back the natural color of teak and
other hardwoods. Gentle formula, does not bleach or damage
surrounding fiberglass, wood, metals and painted surfaces.
Contains Tenside cleaners, which are excellent at removing oil
and dirt.
Premium Teak OilTraditional Scandinavian formula providing ultimate protection
against the elements. Formulated with a rust inhibitors,
protecting metal from rusting. Easy to apply, fast drying, warm
golden color for exterior and interior use. Can be applied to
damp or dry wood, for best results apply to dry wood.
InterProtect 2000E
n Fast drying, easy application
n Use as part of a no sand
system
n The Industry standard for
more than 20 years
InterProtect HS
High solids two-part epoxy
n High solids for fewer coats to
achieve film build
n Protect metals from rust and
oxidation
n Reduced solvent emissions
Cetol MarineIVA300
Cetol MarineLight
IVA290
Cetol MarineNatural Teak
IVA316
Cetol MarineGloss
IVA315
Perfection®
A high-gloss, high-performance two-part polyurethane
that combines a long lasting abrasion and chemical
resistant finish with superb protection from the detrimental
effects of UV rays. Its abrasion resistance makes it ideal
for application to decks and gunwales. Perfection can
be used anywhere above the true waterline on properly
prepared fiberglass, wood, aluminum, steel and epoxy.
The superb high-gloss characteristics, long-lasting color
retention and durability makes Perfection the finest coating available.
Professional quality results are made easy with Perfection.
Snow WhiteYHB000
MediterraneanWhite YHA184
oyster WhiteYHA194
MatterhornWhite YHA198
Arctic WhiteYHS248
Pearl WhiteYHS253
PlatinumYHA183
CreamYHS070
Fighting LadyYellow YHS056
Rochelle RedYHS299
Jade MistGreen YHB663
LauderdaleBlue YHS936
Royal BlueYHA216
Mauritius BlueYHF991
Flag BlueYHK990
Jet BlackYHY999
Topside FinishesBrightside® PolyurethaneBrightside is a hard, easy to use high-gloss one-part
polyurethane topside finish. It has excellent application
characteristics that yield a “sprayed on” look when brush
applied in thin coats. Brightside is ideal for use anywhere
above the true waterline and is easy to clean, resists
staining and has great abrasion resistance. Brightside is
also available in select colors in pints
for striping and boottops.
Blue-Glo WhiteY4259
WhiteY4359*
off-WhiteY4381
Matterhorn White Y4360
Seattle GrayY4205
Steel GrayY4250
Black Y4258*
Light BlueY4351
Medium BlueY4353
Largo BlueY4100
ocean BlueY4253 (C.C. Blue)
Sapphire BlueY4241
Dark BlueY4316
Flag BlueY4990*
Sundown BuffY4237
Grand BanksBeige Y4217
Bristol BeigeY4207
Kingston GrayY4190
Hatteras off-White Y4208
Sea GreenY4247
Fire RedY4248*
YellowY4152
Hatteras off-White
(1990) Y4218
* Also available in
Brightside Boottop
& Striping Enamel
WhiteYJB000
GrayYJF684
CreamYJC089
Sand BeigeYJG009
Squall BlueYJB923
InterdeckAn excellent slip-resistant finish with a tough polyurethane
resin that protects decks against everyday wear and tear.
It contains a fine aggregate and will apply easily on all
substrates. Interdeck has a low sheen finish to reduce
sun glare from decks.
Bilgekote®
A fast drying, durable coating formulated for application
in bilge areas. Bilgekote helps prevent substrate absorp-
tion of oil, gasoline or sludge (into wood and fiberglass
surfaces). Want an easy-to-clean finish?
Try Bilgekote today!
Gray YMA100
White YMA102
off-WhiteYHA192
All trademarks mentioned are owned by, or licensed to, the AkzoNobel group of companies. © AkzoNobel 2016 .
Interlux® Antifouling Range Micron® Technology is the basis of all Micron Paints• Micron is the original controlled-polishing antifouling, offering outstanding performance longevity with an extensive track record on fuel efficiencies
• Longest lasting, multi-season protection with the ability to haul and relaunch without repainting
• Controlled polishing means that it wears away like a bar of soap reducing paint build-up
• Becomes smoother with use, reducing drag and maximizing fuel savings
Micron® 99®
Self Polishing Copolymer with Advanced Biolux SPC
Technology.
n outstanding long lasting antifouling performance
n Self Polishing Copolymer technology deliversmaximum protection even during stationary periods.
n Can be used in all water (Fresh, Brackish and Salt Water)
n For boats over 82 feet.
Blue YBC101 Navy YBC103 Black YBC106
Micron® CSCThe ‘Classic Micron’ in the Micron Family.
n Proven performance for 25 years on Power and
Sail boats in all waters
n The standard in Multi-season Polishing Copolymer -
often imitated but never duplicated!
n Haul and relaunch without repainting
n Great for trailerable boats
n Not for Use on Aluminum
Red Y5582 Black Y5583 Blue Y5580 Green Y5581Dark Blue
Y5586
Shark White
Y5584
Micron® OptimaWater-based Micron Technology delivers ultimate
antifouling performance
n Powerful Activated Biolux Technology to help block slime and algae.
n Multi-seasonal performance for tough areas
n Water-based for easy clean up and application
Micron® WAWater-based Antifouling.
n Micron Antifouling Technology: long-lasting,
multi-season, controlled polishing, and proven
performance
n Unique Water Activated Matrix Technology
n Fast drying time for year-round use
n Easy to apply and with low odor and VoC omissions
n Compatible with most antifouling paints
Red YBA953 Kit Blue YBA973 Kit Black YBA993 Kit
Micron® CFMicron CF is a Copper Free multi-season antifouling
that uses Biolux® Slime Blocking Technology and
Econea™ to ward off hard growth like barnacles
and zebra mussels.
n Suitable for all boats in all waters and all substrates
n Bright colors including Shell White
n Reduced solvent emissions - VoC compliant
n Polishing paint reduces build- up and friction and improves
fuel efficiency
Blue YBD100 Green YBD101 Red YBD102 Black YBD103 Shell White YBD104
Red YBC582 Black YBC583 Blue YBC580 Green YBC581
Micron® 66®
Award-winning, self-polishing copolymer
technology with Biolux® SPC.
n outstanding antifouling performance in the
harshest fouling conditions
n Top rated antifouling in independent tests
n Maximum protection even during stationary periods
n Not for use in fresh water or on aluminum
Red YBA472 Black YBA473 Blue YBA470 Green YBA471
Red V107UKIT Blue V106UKIT original V105UKIT
VC®17m The original thin film antifouling paint that is formulated
with fluoro microadditive to reduce friction and drag,
for optimum speed and efficiencies through the water.
Favored by professional sailing race teams & power
boaters for over 15 years, VC 17m is a hard,
super smooth, racing finish that is super easy to maintain.
Red V117 Black V118 Blue V116
VC® OffshoreFor racing sailing and performance power boats.
VC offshore will yield a hard, smooth, low friction
surface that can be burnished to a very low profile.
VC offshore is suitable for use in fresh and salt water.
Not for use on aluminum.
Baltoplate Metallic
Gray R3950
NEW!
Green YBA559
Red Y3449U Black Y3779U Blue Y3669U Green Y3559U
Fiberglass Bottomkote® AquaA great performing, waterbased, low V.O.C. formulation.
n Water-based antifouling with advanced performance
n Smooth thin build antifouling that delivers advanced
protection while reducing drag and coefficient of friction
n Use on new boats and inflatables with the Interlux Simple
No Sand System
n No strong odor and easy clean up with soap and water
n Low VoC reduces solvent emissions
n Not for use on aluminum.
Ultra-KoteLong-term antifouling protection for medium to high
fouling areas in a hard durable finish.
n Long lasting performance
n Durable finish – excellent color stability
n Low VoC – limits solvent emissions into the atmosphere
n Powerful antifouling protection
n Not for use on aluminum
Red YBA062 Black YBA063 White YBA068
Trilux® 33®
Trilux 33 offers brighter, cleaner colors, and is ideal
for use on all traditional boat substrates including
aluminum.
n Biolux® slime blocking technology reduces slime and
increases antifouling performance
Fiberglass Bottomkote® NTThe Fiberglass Bottomkote NT Advantage:
n NT (New Technology) – optimizes the benefits of hard
and ablative paints through a unique Dual Resin
Approach
n Durable Coating – Prevents premature wear-through
yet a slow polishing action minimizes unnecessary paint build-up
n Fast-Dry – So fast you can paint and launch in the same day!
n Universal – A cost effective choice for all power and sail boats
and in all waters
n Not for use on aluminum.
Red YBB349 Black YBB379 Blue YBB369 Green YBB359
Red YBA549 Black YBA579 Blue YBA569
Note: All new Sea Ray and Meridian boats are delivered with Fiber-
glass Bottomkote Aqua.
ACTBest value ablative antifouling protection.
n Season to Season Ablative Antifouling eliminates
paint build up and sanding
n Provides excellent protection in waters with moderate
to heavy fouling
n Not for use on aluminum
Red 4490U
Black7790U
Brown8890U
Blue 6690U
Green5590U
Aqua-One Performance AblativeAqua-One is a water-based ablative antifouling
that delivers strong protection for all areas.
n Powerful protection all season long
n Compatible with most antifouling paints for power
and sail boats in all waters.
n Easy application and clean-up
n Not for use on aluminum
Red YBE149 Green YBE159 Blue YBE169 Black YBE179
Pacifica® PlusCopper Free, dual biocide antifouling paint.
n Contains Biolux® Slime-Blocking technology and
Econea™ to control shell growth
n Ablative antifouling paint reduces build-up and friction
n Suitable for all substrates, including aluminum
n Reduced solvent emissions - VoC compliant
n Gray and black available in pints for brush application
to outdrives and outboards
Red YBB262 Black YBB263 Blue YBB260 Green YBB261 Gray YBB264
Gray YBA064ABlack YBA063A White YBA068A
Trilux® 33® AerosolThe best performance aerosol antifouling available,
Trilux 33 Aerosol has been formulated specifically for
aluminum outboards, outdrives and can be used on
all underwater metals. Biolux Technology is used to
control slime growth. Prime bare metal with rimocon.