340 Kaplan Drive l Fairfield, NJ 07004-6004973-227-4904 l FAX: 973-227-1651

Distribution Center l Carol Stream, IL 60188630-752-0600 l FAX: 630-752-0680

DTM-MICROTENSION

METER

POWERING GLOBAL INDUSTRY

jasonindustrial.com

PRECISION BELT TENSION MEASUREMENTEASY l ACCURATE l RELIABLE l REPEATABLE

l To achieve maximum life, it is important for a belt drive to be accurately tensioned. Additional advantages include reduced stress on drive components (by avoiding over-tensioning) and, in some cases, reduced noise levels.

l Tensioning by means of measuring frequency is considered as the optimum method to achieve precision belt tension.

Measurement is obtained by striking the top belt strand of a tensioned belt drive (like plucking the string of a guitar).

The drive is then tightened (or loosened) to arrive at a calculated frequency that corresponds to the correct tension.

l The DTM-MICRO from Megadyne is a compact, precise and affordable measurement tool that allows the user to set

accurate drive tension every time.

PB-TM-5/13-2M

DTM-MICRO TENSION METER

TECHNICAL DETAILS Range of Measurement...............................10 - 600 Hz Unit Dimensions.............................4” x 2” x 1.5”

Measuring Precision.....................................10 - 400 Hz +/-1% Case Dimensions............................5” x 2.5” x 3”

Resolution.......................................................10 - 99 Hz: 0.1 Hz Display..............................................LCD - 2 lines of > 100Hz: 1.0 Hz 8 Characters

Measuring Method....................................Non-contact acoustic Weight...............................Approximately 3.5 ounces with background noise (without batteries or suppression microphone)

Power Consumption............................................< 12 mA Power Supply...............................(2) AAA 1.5V

Working Time.............................................48 hours continuous measurement with properly charged batteries

MEGADYNE HEADQUARTERS

Via Trieste 16, 10075Mathi (TO) - ITALYmail@megadyne.itwww.megadyne.it

JASON HEADQUARTERS

340 Kaplan DriveFairfield, NJ 07004Ph: 973-227-4904Fax: 973-227-1651www.jasonindustrial.com

Jason Industrial Inc.®A MEGADYNE GROUP CO.

EUROPEMIDDLE EASTAFRICA

MATHI (Italy)*VENICE (Italy)MILAN (Italy)*MINSK (Belarus)PRAGUE (Czech Republic)PARIS (France)ST. JEANNE DE MAURIENNE (France)*LYON (France)BORCHEN (Germany)*ULM (Germany)BUDAPEST (Hungary)BYDGOSZCZ (Poland)BARCELONA (Spain)*DUDLEY (U.K.)STOCKHOLM (Sweden)

AMERICAS

FAIRFIELD, NJ (U.S.A.)CAROL STREAM, IL (U.S.A.)BELL, CA (U.S.A.)TAMPA, FL (U.S.A.)DALLAS, TX (U.S.A.)PORTLAND, OR (U.S.A.)CHARLOTTE, NC (U.S.A.)*GREENVILLE, SC (U.S.A.)*DORVAL, Quebec (Canada)MISSISSAUGA, Ontario (Canada)EDMONTON, Alberta (Canada)AZCAPOTZALCO (Mexico)SAO PAULO (Brasil)SOROCABA (Brasil)COLOMBIA

*MANUFACTURING FACILITIES

ASIA/PACIFIC

NINGBO (R.P.C.)*QINGDAO (R.P.C.)*SHANGHAI (R.P.C.)FOSHAN (R.P.C.)

KIT INCLUDES:

l DTM-MICRO Tension Meterl Sensing Headl Connector Cablel Carry Casel Instruction Manual