Precision Agriculture - Power Farming catalogue PrecAgCatalog… · Precision Agriculture Solutions. 2 3 Powerful Precision Made Easy As a farm operator,

www.topconpa.com

PrecisionAgriculture

Solutions

www.topconpa.com 32 www.topconpa.com

Powerful Precision Made EasyAs a farm operator, you need to produce higher yields, more efficiently, to feed the ever-increasing population, while carefully balancing our fragile environment.

With 80 years’ experience in the precise positioning industry, Topcon has more than 25 years invested in providing advanced technology products that improve farm profitability worldwide.

Topcon’s advanced precision products are designed to increase efficiency, improve yields, reduce input costs, conserve land and water, and enhance your overall farm management system.

These systems will increase your productivity and profitability throughout the farming cycle and are essential to maximizing your business opportunities in the ever changing world of global agriculture.

Products That are Easy to Learn, Easy to UseTopcon Precision Agriculture’s primary goal is to serve agribusinesses, professional farmers and agricultural contractors with easy-to-use precision farming solutions that employ innovative technology to create superior value – through improved operational efficiency and input cost reduction.

Check out our product portfolio featuring the most advanced technology for autosteering, guidance, GNSS positioning, variable rate control, autosection control, on-the-go crop canopy sensing, water management and farm data management. It’s powerful precision made easy.

AES-25Electric Steering

AgCam interface for X30

System 150/350 Autosteering

SGR-1 Receiver with TruPass®

FA R M I N G C YC L E

Laser Water Management and Land Leveling Systems

System 310 GPS Water Management & Land Leveling

Laser Transmitters and Receivers

SGIS Agronomy Software

AGForm-3D Field Design Software

System 350Mapping, Reports

ContentsPrecision Application and Autosteering/Guidance4-5 System 110 GNSS Lightbar Guidance6-7 System 150 Precision AutoSteering8-9 System 350 Complete Precision Ag Control 10-11 Precision Application X30 / System 35012-13 Autosteering Systems AES-25 Electric Steering, AGI-4 14 Controlled Traffic Farming with Topcon Optimal Lines15 CropSpec™ On-the-Go Crop Canopy Sensors

SGIS Agronomy Software16 SGISfarm17 SGISproLandforming/Water Management18-19 System 310 GPS Land Leveling Water Management Systems20 AgForm-3D Field Design, Grading, Survey Software21 Laser Land Leveling Water Management SystemsTopcon Technology22-23 Accuracy Choices



X30 All-in-one Console

SGR-1 Receiver with TruPass®

System 110 GNSS Lightbar Guidance,System 150 Autosteering &

Autosection Control

System 150/350 Seed Control, Spray Control, Variable Rate Control

AgCam interface for X30

System 350 Precision Seeding and Planting

System 350 Steering and Air Seeders for Small Grains

AES-25 Accurate Electric Steering

ASC-10 Autosection and Rate Control

ASC-10 Autosection and Rate Control

CropSpec™ On-the-Go Crop Canopy Sensing

SGIS Agronomy Software

AES-25 Accurate Electric

Steering

Interface with NORAC UC5 boom leveling system


GX-45 Console

SGR-1 Receiver

The SGR-1 Receiver features Topcon’s TruPass™ advanced positioning technology for higher, more stable pass-to-pass accuracies in dynamic ag applications.

System 110This system improves efficiency and operating speeds while reducing overlap and extending hours of operation. Multi-function, quick-action keys follow on-screen menus for easy function changes and simple operation. System 110 is easy to install and use “right out of the box” and provides simple on-screen setup with visual aids, including implement offsets and settings for leading market vehicles. The addition of ASC-10 eliminates gaps/overlaps with section and rate control and reduces inputs while protecting your crops.

SGR-1 ReceiverTopcon’s rugged, compact receiver provides simultaneous processing of GLONASS and GPS signals with 32-channel universal tracking. The SGR-1 outputs ground speed as simulated radar for improved slow speed operations such as seeding and spraying.

System 110GNSS Lightbar Guidance System• Fast, 32-channel, multi-constellation signal acquisition• Automatic coverage mapping with exportable reports and shape files• Optional Liquid Rate Control and Autosection Control (ASC)

• BoundaryMappingforplanningapplicationandcoverage

• 5"colorscreenwithseparateday/nightmodes

• On-screenIndicatorsdisplayareaapplied,speed, rownumber,andsatellites

• Virtual-RoadDisplayorhigh-visibilityLEDLightbarfor state-of-the-artvisualguidance

• Adjustabledisplayandlightbarbrightnessforhigher visibilityandaddedworkinghours.

• Rugged,lightweightandsimpletomoveamongvehicles

• ConvenientUSBPortfortransferringfielddata

ASC-10 Electronic Control Unit10-section sprayer, planter, or spreader

autosection control (ASC) with Liquid Rate Control

OptionsFeatures

Remote Lightbar MountingSuction cup mount allows quick optimal

placement for ideal visual reference.

Guidance PatternsSystem 110 provides multiple guidance patterns that can be used in unlimited combinations. Quickly set up and follow the most efficient, practical patterns for virtually any field shape.


GX-45 Console

AGI-4 Receiver

Autosteering eases operator fatigue, reduces machine wear-and-tear, reduces overlap and input costs and allows 24/7 operation regardless of environmental conditions.

Plays well with othersAGI-4 features industry-leading ISO11783 compatibility with virtual terminals. This feature allows you to add Topcon’s industry-leading autosteering performance

to many steer-ready vehicles via a single component installation. Compatible with many other manufacturer's displays, the AGI-4 steering controller gives true Drop-in and Drive convenience.

System 150Precision Autosteering System with industry leading performance• Flexible accuracy options up to 2cm• Optional AES-25 Electric Steering • Optional Liquid Rate and Autosection Control

AES-25 Accurate Electric SteeringIncreases efficiency and reduces fatigue.

Easy to move among machines.Provides fast, accurate steering response

with up to 2cm accuracy

• Completeautosteeringsystemwithflexibleaccuracyoptions

• AutomaticCoverageMappingwithexportable reportsandshapefiles

• BoundaryMappingforplanningapplicationandcoverage

• 5"colorscreenwithseparateday/nightmodes

• On-screenIndicatorsdisplayareaapplied,speed, rownumber,andsatellites

• Usevirtual-roaddisplayorhigh-visibilityLEDlightbar forstate-of-the-artvisualguidance

• Rugged,lightweightandsimpletomoveamongvehicles


Accuracy UpgradesUpgrade options for RTK include 900 mHz

radio and GSM, UHF Digital Modem with GSM. OmniSTAR HP/XP upgrade options

also available. Compatible with Topcon base stations, TopNET, GSM and CORS networks.

Direct Interface SteeringCompatible with a wide range of "steer

ready" vehicles using high-speed CANbus communications.

ASC-10 Electronic Control Unit10-section sprayer, planter, or spreader

autosection control (ASC) with Liquid Rate Control

OptionsFeatures

Remote Mounting LightbarSuction cup mount allows quick optimal

placement for ideal visual reference.

System 150System 150 offers a range of automatic guidance patterns (including boundary and U-turn recognition) making it easy to complete turns and lock-on to the next swath. Multi-function, quick-action keys follow on-screen menus for easy function changes and simple operation. System 150 features simple on-screen setup with visual aids, including implement offsets and settings for leading market vehicles.

NEW AGI-4 Receiver/Steering Controller, the first truly modular ISO-compliant steering systemAn ISO-compliant steering system featuring multiple-constellation GNSS satellite reception, state-of-the-art inertial sensors, and full terrain compensation, with superior line acquisition and holding capabilities. Standard with WAAS and EGNOS, easily upgradeable to 2cm accuracy with RTK radio options. NTRIP capability allows you to tap into existing reference networks via mobile phone connection (dependent on local availability) and uses existing data plans and infrastructure to minimize costs.The AGI-4 features industry-leading ISO11783 compatibility with virtual terminals. The all-in-one, modular design incorporates the antenna, receiver, and steering controller in a single component, offering unmatched upgradeability.


Topcon's state-of-the-art X30 is speciallydesigned to help you improve farm management, increase efficiency and enhance machine capabilities. The all-in-one console reduces cab clutter.

The X30 screen displays autosteering settings, dashboard, and multiple product control. Industry standard steering patterns; straight (A-B), identical curve, adaptive curve, and center pivot allow you to work with virtually any field shape. Integrated lightbar provides easy offline reference at a glance.

Plays well with othersAGI-4 features industry-leading ISO11783 compatibility with virtual terminals. This feature allows you to add Topcon’s industry-leading autosteering

performance to many steer-ready vehicles via a single component installation. Compatible with many other manufacturer's

displays, the AGI-4 steering controller gives true Drop-in and Drive convenience.

AES-25Accurate Electric Steering

Increases efficiency and reduces fatigue. Easy to move among machines. Provides

fast, accurate steering response with up to 2cm accuracy and full terrain

compensation

• Large12.1”(31cm)multi-touchscreenwithsharp,high- resolutiongraphics,easilyreadableinbrightsunlight

• Usercustomizableoptionsincludealarms/alerts,US,metric, orImperialunits,mapoptions,timeanddate,radaroutput, GPSoutput,andlook-aheadsettings

• Simpleicon-basedsetupwithintuitivestep-by-stepnavigation guidesforsettingupcontrollers,vehicles,andimplements • Operatesin28languages

ASC-10Electronic Control Unit

10-section sprayer, planter, or spreader autosection control

with Liquid Rate Control

Complete Precision Ag Control System featuring the X30 Console• High accuracy autosteering with flexible accuracy options up to 2cm• Optional AES-25 Electric Steering • Optional Liquid Rate Control and Autosection Control with ASC-10

System 350

interaction keypads with “expandable menus”

drag-n-drop information windows

user determined “dashboard” readouts

integrated LED lightbar for manual guidance.

mini-view Information windows

Accuracy UpgradesUpgrade options for RTK include 900 mHz

radio and GSM, UHF Digital Modem with GSM, and OmniSTAR HP/XP upgrade. Compatible with Topcon base stations,

TopNET, GSM and CORS networks.

OptionsFeatures

AgCamHigh-quality on-screen video in

any light conditions, day or night from up to four cameras.

Solid-state electronics, rugged and waterproof, with strong magnetic

mount. Easily positioned or moved among vehicles.

X30 ConsoleThe X30 is a versatile platform featuring simple flexible software and icon-based user-definable interface. Intuitive features such as the double-touch screen control, mini-view drag-and-drop info windows, user definable "dashboard," and interactive keypads, the X30 provides a wealth of control and display options with feedback at a glance from multiple sensors throughout your machine. With its simple setup, easy-to-use interface and highly-capable equipment controls, the system is easy to upgrade as your farming needs grow.

NEW AGI-4 Receiver/Steering Controller, the first truly modular ISO-compliant steering systemAn ISO-compliant steering system featuring multiple-constellation GNSS satellite reception, state-of-the-art inertial sensors, and full terrain compensation, with superior line acquisition and holding capabilities. Standard with WAAS and EGNOS, easily upgradeable to 2cm accuracy with RTK radio options. NTRIP capability allows you to tap into existing reference networks via mobile phone connection (dependent on local availability) and uses existing data plans and infrastructure to minimize costs.The AGI-4 features industry-leading ISO11783 compatibility with virtual terminals. The all-in-one, modular design incorporates the antenna, receiver, and steering controller in a single component, offering unmatched upgradeability.


ISO Virtual Terminal (VT) The X30 virtual terminal supports plug-and-play operation for direct control of major planter monitors and planter, seeder and sprayer controllers with industry standard ISO11783. Operates in parallel with X30 autosection control. For sprayers and planters, up to 32-section autosection control can be accessed through the ISO interface.

Sprayer ControlReduce your workload and increase your accuracy. Spray control provides cost savings on inputs, while protecting the environment from excess application. The easy-to-use system can control multiple products and is compatible with the NORAC UC5™ boom leveling system via ISO**.

Variable Rate ControlSingle or multiple product variable rate reduces input costs by applying seed and fertilizer precisely where you need it. Import prescription maps, build your own, or generate real-time as-applied log maps. Simultaneously controls and records data for up to 8 products.

X30 controllers include spraying, spreading, or planting and feature innovative efficiency tools such as virtual switchbox, flow-over-pressure based rate control, and auto coverage to help ensure no gaps or overlap.

Topcon ease-of-use means more profitability for you

**NORAC Systems International, Inc.

X30 Precision ApplicationVersatile X30 controls for spraying, spreading or planting• Variable Rate Control (VRC) for simultaneous control of up to 8 products• Autosection control (ASC) with ISO interface for sprayers and planters• Easy to upgrade as your application needs grow

The X30 can generate exportable boundary, coverage, logging, and as-applied maps with flag points. The X30 imports shapefiles and ISOXML prescription maps. The software calculates covered and remaining areas.

The X30 also provides multiple input/output features for maximum data use. Client/Farm/Field/Job menu saves multiple fields and tasks for different farms. Create detailed exportable reports for data tracking and multi-year analysis. AutoLocate (automatic field recognition by proximity to your current location) feature allows easy field identification and job loading.

Mapping and Data Management

The ASC-10 provides ten-section sprayer, planter, or spreader section control and handles point rows or triangular-shaped fields. ASC automatically switches sections on/off as you cross previously applied areas or move outside field boundaries. ASC eliminates gaps/overlaps and reduces inputs while protecting your crops. Liquid rate control keeps application rate constant even with varied vehicle speeds.

Autosection (ASC) and Liquid Rate Control

Spreader ControlVariable rate capability accurately controls liquid or granular nitrogen and fertilizer application. Perform variable rate application from imported prescription maps or generate real-time "as applied" maps. Compatible with common spreader hydraulic systems. Auto-shutoff when used with ASC-10.


Autosteering

ACU-1 Direct Interface SteeringCompatible with a wide range of "steer ready" vehicles using high-speed CANbus communications.

Accuracy UpgradesUpgrade options for RTK include 900 mHz radio and GSM, UHF Digital Modem with GSM. OmniSTAR HP/XP upgrade options also available. Compatible with Topcon base stations, TopNET, GSM and CORS networks.

Topcon steering technologies to fit your vehicle and accuracy needs • Choose from electric steering or direct interface• Advanced, versatile solutions for all platforms with accuracy up to 2cm • Considerations include accuracy needs, installation time, support and calibration, maintenance, flexibility, and cost.

The compact, self-contained AES-25 does not intrude into the operator’s working area with external components that could interfere with normal day-to-day operation.

AES-25 Electric Steering, precise steering control, full hydraulic performance, electric convenienceFast, flexible, and accurate, AES-25 is a superb alternative to common hydraulic steering. With a quiet, high-torque, direct-drive motor, AES-25 provides silent operation and the most accurate electric steering in the world. AES-25 features excellent performance in a wide range of diverse applications, including sprayers and windrowers and provides a great autosteering solution for non steer-ready tractors.AES-25 with AGI-4 provides a complete autosteering package that is easily transferable between machines. Step up to RTK to achieve 2cm accuracy. Convenient, simple installation, reverse operation, and full terrain compensation. An optional wheel angle sensor can be added for greater stability in challenging conditions.

AGI-4 Receiver/Steering Controller, the first truly modular ISO-compliant steering systemAn ISO-compliant steering system featuring multiple-constellation GNSS satellite reception, state-of-the-art inertial sensors, and full terrain compensation, with superior line acquisition and holding capabilities. AGI-4 is standard with WAAS and EGNOS, easily upgradeable to 2cm accuracy with RTK radio options. NTRIP capability allows you to tap into existing reference networks via mobile phone connection (dependent on local availability) and uses existing data plans and infrastructure to minimize costs.The AGI-4 features industry-leading ISO11783 compatibility with virtual terminals. The all-in-one, modular design incorporates the antenna, receiver, and steering controller in a single component, offering unmatched upgradeability.

Autosteering increases efficiency, eases operator fatigue, reduces machine wear-and-tear, reduces overlap and input costs and allows 24/7 operation regardless of environmental conditions

The AGI-4 receives signals from all available satellites; more satellites means improved accuracy, better reception around hills and trees, and 24/7 operation.


sensing footprint sensing footprint

• CreateOptimalLines"onthefly"withtouch-screenicons

• Automaticdetectionofnearestlines

• Manuallyselectalinetosteerfrombysimply touchingonthescreen(alllinesarenumbered) or“jump”tothenextorpreviousline

• Workslikehavingmultipleidenticalcurvesin onefieldwithouthavingtoloadnewlines

• Linescanbeeasilyloadedfromshapefiles

Features

Outstanding tool for Controlled Traffic Farming• Reduces damage from heavy or repeated passes• Select any line in a field and autosteer parallel lines • Easily activated option of Topcon's System 350 (X30 Controller)

X30 Optimal Lines

Controlled Traffic Farming with unmatched versatilityPrimarily created to reduce plant damage in sugar cane applications, Optimal Lines provides many additional benefits in farming situations where flexibility in GPS lines is needed to accommodate varied field conditions and equipment setups over many years.

Controlled Traffic Farming (CTF) reduces soil compaction damage caused by heavy or repeated passes over the land. Well documented negative consequences include increased fuel use, poor seedbeds, reduced yields and poor soil function in terms of water infiltration, drainage and greenhouse gas mitigation.

A Controlled Traffic Farming system confines machinery to the least possible area of permanent traffic lanes. With no control, machines can run randomly over the land, compacting as much as 75% of the area within one season and at least the whole area by the second season. Soils can take years to recover. A proper CTF system can reduce tracking to just 15% and this is always in the same place.

On-the-go crop canopy sensor• Real-time integrated crop monitoring and application• Reduces time and cost over blanket coverage• Compatible with Topcon System 350 (X30 Controller)

Just-in-time crop management Monitor in-field variability, treat on-the-go, or save data for future analysis and creation of prescription maps. CropSpec operates with any of the X30 application controllers.

Based on Topcon’s core competency of optics, CropSpec uses pulsing laser diodes. The units mount on the cabin roof out of harm’s way, with less potential for damage to crops or equipment. The sensors measure plant reflectance to determine chlorophyl content, which correlates to nitrogen concentration in the leaf.

This non-destructive, non-contact method provides accurate, stable readings and repeatable values. CropSpec was developed in cooperation with Yara International, a leading world supplier of nutrients.

• Reducefertilizercostsbyapplyingbasedonly oncropneed

• Createprescriptionmaps,orprescribeandapply inasinglepass

• 24/7operation

• Cabmountedsensorsprotectedandoutofharmsway

• Largestsensorfootprintintheindustryreadsalarger percentageoftheareatobeapplied

• Provideson-the-goaveragingwithuser-determined targetrates

• Viewscropsatauniformangletothecropratherthan directlyabovetominimizetheeffectsofshadowing, cropmovement,etc.

Features

Data and MappingThe X30 mapping and logging functions provide a wealth of data for recordkeeping, as-applied maps, future analysis or prescription designs.

Three Operating Modes

Read and RecordAllowstheusertocollectandstoredataforofflineanalysisandcreationofprescriptionmaps

User Determined Rate ControlHi/Lowbasicmode-sethighandlowpointsthenperformon-the-goapplicationusingfieldaveraging.

Real-Time Variable Rate ApplicationSubscribetooptionalYarasoftwaretoprocessreadingsanddetermineoptimumfertilizerrates.ThissystemallowstheusertoperformVRAatthesametimenitrogenlevelsareread,controllingfertilizeroutputinonepass.

CropSpecTM


Delivers insight, control and profitabilitySGISfarm is built on the industry leading ESRI ArcEngine 10.1, the same engine used by local FSA and government offices. SGISfarm features a simple, easy-to-learn-and-use process for creating flat and variable rate maps without sacrificing quality or reliability. The process is focused on basic but proven recommendation methods. These methods are pre-packaged in templates which eliminate the need for the user to learn the complex process of writing equations.

TM

Application maps are easily written for most current controllers.SGISfarm imports and manages all types of data critical to a successful precision farming operation including: soil test, harvest, as-applied and crop sensor. SGISfarm also supports an extensive list of third party application controllers and yield monitors and easily imports/exports data from other farm office software and controllers. Once data is imported in SGISfarm, reports are automatically generated for easy viewing of multiple inputs such as moisture, yield volume and yield mass.

SGISfarm's open architecture design complies with international data standards as well as popular GIS and image file standards. Integrated Microsoft Bing provides easy on-screen display of color imagery as well as reports and maps.

Simple-to-use data management software for farm owners and operators• Developed for farmers who want to improve their overall farming operation• Pre-packaged templates eliminate the user's need to write complex equations.

Data management and analysis software for the professional agronomist• Powerful, sophisticated tool for agricultural mapping and crop planning and analysis• SGISpro delivers powerful insights that can directly impact profitability• Imports data from many sources and formats

• Builtonindustry-leadingESRIARC10GIScomponents• Alldatastoredinasinglegeo-databasefile• SGISgeo-databaseiscompatiblewithallESRIGIS softwareproducts• SGISprosoftwareacceptsdatatypesandformatsfrom awiderangeofimplementandmachinemanufacturers• SGISproalsoworksinconjunctionwithSGISfarmso datacaneasilybesharedbetweenthegrowerandthe agronomist• Foraccuracy,SGISprocanapplymultiplefiltersand alsocontainsaunitconversionandcreationutility

Features

Precision from initial Data import to final analysisWith 20 years of in-field experience and the market-leading ESRI ArcGIS 10.1 Engine, SGISpro is designed for the agronomist or technology-minded farmer. SGISpro converts yield, soil sample and other agricultural data into geo-referenced maps that professionals can use to better understand crop performance and make more accurate application plans and decisions. SGISpro users can efficiently and effectively offer multi-product and variable-rate plans customized to growers’ local conditions and requirements.

SGISpro guides agronomic and economic recommendations – and more profitable crop production decisions. SGISpro incorporates a powerful recommendation builder module and lets the user write rules tailored to local requirements based on fully customizable standards. This feature sets SGIS apart as it lets agronomists input their knowledge of local conditions and preferred crop husbandry practices and guides the development of more accurate and varied application plans.

TM

SGISpro templates and program wizards quickly import soil test, yield and as-applied data to make more informed decisions for the next growing season. SGISpro easily creates flat rate or variable-rate application plans for single or multiple products. Frequently used plans can be conveniently saved for future use. SGISpro also features many batch processes including report processing and book creation, multiple map/machine type simultaneous export and field boundary processing to save time and maximize efficiency in the office as well as in the field.


MC-R3 Receiver

X30 Control Console (order separately)

HiPer AG Mobile Base Station

CR-G3 Dome Antenna

PG-A1 Antenna

• Performfieldsurveysinminutes

• Unaffectedbytemperaturechange,highwind,dustorfog

• Helpsimprovesurfacedrainageandirrigationefficiency

• 24/7operation


System 310Survey, create cut/fill maps and start grading without leaving the cab. Best-fit calculations reduce yardage up to 10% versus traditional hand-calculated laser surveys. The large, bright X30 color touch-screen displays real-time elevation, maps, position, and menus. Add the AGI-4 receiver and AES-25 electric steering for high accuracy autosteering control.

MC-R3The MC-R3 integrates a receiver, radio, and controllers with multiple I/O ports for maximum connectivity. Robust processing and programmable valve drivers provide smooth hydraulic control for cuts/fills, grading, and surveying.

HiPer AG Mobile RTK Base StationThe compact unit integrates a receiver, radio, antennas, and rechargeable battery and functions as a mobile, cable-free base, fixed base station or surveying rover. The HiPer AG provides GNSS corrections for high-accuracy Z-axis positioning and fast and easy data collection for surveying.

System 310Time tested, field proven AGS landforming, surveying and field design• Dual-constellation (GPS + GLONASS) satellite reception for maximum accuracy• Grade more than 12,000 acres from one setup• Single or dual scraper control

AGForm-3DEasy-to-use field design and survey

software calculates best-fit slopes and reduces yardage. An ideal companion for System 310, AGForm-3D with a HiPer AG

provides a complete ag survey system.

Water management is an essential and integral part of today’s precision farming practices. Effective water management makes the most efficient use of the world’s most precious resource while protecting the environment.

OptionsFeatures

PG-A1 Antenna Integrated ground plane and precision micro-centering technology to reduce

multipath errors.

CR-G3 Dome Antenna Internal choke ring for exceptional

performance in more demanding multipath prone environments.


AGForm-3D is an intuitive and easy to use solution for improving surface drainage and irrigation efficiency.

AGForm-3D lets you break fields into multiple sections to reduce yardage, shorten hauls and minimize topsoil cuts. Design sections as best-fit, single-slope, or dual-slope planes, then transfer files to the System 310 controller for automatic GPS control.

Enter desired slopes and AGForm-3D creates 3D designs that ensure your fields will drain. Retain natural slopes while smoothing highs and lows that impede water flow. Images can be displayed in plan views or profile views and summary reports can be printed.

AGForm-3D with a HiPer AG gives you a complete ag survey system and lets you perform fast, accurate, surveys from one setup, even with large elevation changes, irregular shapes, dust, wind, or fog.

The integration of survey, design, and grading of agricultural fields has never been easier!

AGForm-3DField design, grading, and survey software• Unique, powerful non-planar (piecewise continuous) design capability• Design fields with single or multiple sections • Handy tools calculate distance, slope, area, and volume

Cut-Fill Grid Map

Cut-Fill Contour Map

View existing ground and designs using contour or 3D graphical views.

TM-1 Electric MastMountsonscrapercrossframe.Raisesandlowerslaserreceiverforquick,accuratesurveys.

Topcon’sRL-200Seriessetsnewstandardsforsimplicityandaccuracy.Rugged,lightweight,andcompact,fortwicethelaseratanamazinglyaffordableprice.Choosefromtwomodels,RL-2001Ssingleslope,orRL-2002Sdualslope.TheRL-2001Sprovidessingleslopesfrom-5%upto+25%.TheRL-2002Sprovidesdualslopesupto+/-10%intheXaxis,oruptoanindustryleading-5to+25%intheYaxis.

Visualgradeindicatorsformanualcontrolorautomaticmodeforhydrauliccuttingedgeelevationcontrol.Simplesecuremechanicalmountingbracket.

• 360°reception• Brightmulti-coloredgradeindicators• Alkalineorrechargeablebattery• Adjustableon-gradeaccuracy• Waterproofanddustproof• Plumbindicator

LaserLand leveling, surveying, and water management• Time and field proven traditional technology• Single or dual scraper control • Flexible options to suit your needs from basic manual indicate to fully automatic laser machine control

RL-200 Series Single and Dual Slope Lasers LS-B110 Laser Receiver

System Five - Fully AutomaticGrade and slope are displayed in large, backlit characters. Autorecord and average calculations for surveying.

Dual Control 9164 Elevation control for two scrapers - or slope and elevation on a single scraper. Combine with TM-1 survey masts or use rigid masts for economy.

Single Control 9256 Combine with a TM-1 mast and LS-B110 laser receiver for automatic control and survey capabilities on a single scraper. Survey function adds, then averages elevations. Perfect for field leveling or maintaining roads or ditch pads.

Economy LS-B110 automatic control where surveying capabilities are not needed.

Indicate LS-B110 High/Low/On grade light indication for manual control.

Large,high-contrast,graphicaldisplayclearlyshowsallfunctionsataglance.

TheRL-200Seriesrevolutionaryencodingsystemprovidesthehighestgraderepeatability,7arcseconds,ofanyotherlaser.

Setupaftersetup,timeaftertime,you’realwaysrightongrade.


GNSS Accuracy Choices

Sub-Meter Correction Omnistar–SubscriptionWAAS – FreesignalEGNOS–Freesignal

DGPS Differential GPSFrequency L1

Differential Correction WAAS,EGNOSorVBS

Typical UseSprayingSpreadingHarvestingMappingFieldPreparation

Pass to Pass Accuracy +/–

30cm*

SGR-1 with TruPass™GNSSreceiverandantennainasingleruggedhousing.or AGI-4Consistentsub-meterperformancewithmanycorrectionoptions.

AGI-4 or HiPer AG Mobile Base StationFeaturingmultiple-constellationtracking.HiperAGfeaturesDualConstellationGPS+GLONASStracking.

RTK Real-Time KinematicDual Frequency L1/L2

Differential CorrectionRTKBaseStationNTRIPCORS/Cell

Typical UseStripTillageBedding,PlantingTopographicMappingLandforming


2cm*Dual Frequency High PerformanceDual Frequency HP/XP

Differential CorrectionOmniSTARXP/HP

Typical UsePlantingCultivatingTillingSeeding


10cm*

AGI-4 Multiple-constellation.Flexibleaccuracyoptions.StandardWAASandEGNOS,upgradabletoRTK,GSM,OmniSTAR.

* Pass to pass accuracy based on 15 minute intervals.

More SatellitesAbility to use GPS, GLONASS, and Galileo constellations means more satellites for higher accuracy, increased productivity, and less down time during poor satellite coverage.

Differential Correction SignalsSatellite signals must be corrected to be suitable for precision ag applications. This is known as "differential correction." Not all signals are available in all world regions.

Topcon World's First Technology

GPS/GLONASSSatellites

Antenna

DifferentialcorrectionsignalOMNISTARVBS

DGPS/HP/XP

Accuracy Comparison

HiPerAGbasestation

RTK

GPS/GLONASSSatellites

Antenna

Topcon HiPer AG GNSS base station provides the ultimate in control. Allows you to own and control your own base station.

RTK2cm

INITIAL COSTS - HIGH ONGOING COSTS - NONE

CORS2-30cm

INITIAL COSTS - LOWONGOING COSTS - SUBSCRIPTIONS

HP10cm

INITIAL COSTS - MEDIUMONGOING COSTS - SUBSCRIPTIONS

DGPS10-30cmINITIAL COSTS - LOW

ONGOING COSTS - NONE or SUBSCRIPTIONS

GNSS = GPS + GLONASS2-5m

INITIAL COSTS - LOW ONGOING COSTS - NONE

Topcon Precision Agriculture16900 West 118th TerraceOlathe, KS 66061 USAPhone: 913-928-2630

Topcon Precision Agriculture14 Park WayMawson Lakes SA 5095 AustraliaPhone: +61-8-8203-3300Fax : +61-8-8203-3399

Topcon Precision AgricultureAvenida de la Industria 35Tres Cantos 28760, SpainPhone: +34-91-804-92-31Fax: +34-91-803-14-15

Topcon Positioning Systems, Inc.7400 National DriveLivermore CA 94551 USAPhone: 925-245-8300Fax: 925-245-8599

Topcon Corporation75-1 Hasunuma-cho, Itabashi-kuTokyo 174-8580 JapanPhone: +81-3-5994-0671Fax: +81-3-5994-0672

© 2013 Topcon Precision Agriculture All rights reserved.Specifications subject to change without notice

P/N 7010-0899-EN Rev I 10/2013

www.topconpa.com

Documents

Precision Agriculture - Power Farming catalogue PrecAgCatalog… · Precision Agriculture Solutions. 2 3 Powerful Precision Made Easy As a farm operator,