PowerPoint Presentation FLUID CONNECTIONS . RFID-based IdentiQuik® couplings redefine what's possible for controlling, protecting and streamlining fluid handling processe\൳

$Page 1: PowerPoint Presentation FLUID CONNECTIONS . RFID-based IdentiQuik® couplings redefine what's possible for controlling, protecting and streamlining fluid handling processe\൳$
INTELLIGENT FLUID CONNECTIONS

Presenter

Presentation Notes

RFID-based IdentiQuik® couplings redefine what's possible for controlling, protecting and streamlining fluid handling processes. IdentiQuik technology allows the robust transfer of fluid and information to identify device type or connected media, verify line connection accuracy or capture fluid and product data. Hybrid connectors eliminate misconnections by integrating electrical, fluid and gas lines into a single connection point.

AGENDA

CPC - Colder Products Company Overview

Communicating Couplings – Hybrid

Communicating Couplings – IdentiQuik

IdentiQuik Demonstration

CPC – COLDER PRODUCTS COMPANY

Leading provider of couplings, fittings and connectors for flexible tubing

• Smart fluid handling to take you forward, faster

Founded in 1978 in St. Paul, Minnesota, USA

Acquired by Dover Corporation in 2005

• Dover – Fortune 500, multi-billion dollar diversified manufacturer

400+ employees worldwide, sales offices in 9 countries

10,500+ standard and custom connection solutions

MARKETS

Life sciences – medical • Blood pressure cuffs • Cold/compression therapy • In Vitro Diagnostics and analytical

instrumentation

Bioprocessing and

biopharmaceutical single-use connections

Specialty Industrial • Liquid cooling of electronics • Large-format and industrial printing • Personal hydration • Motorcycle and utility vehicle engine

systems

Chemical Handling, Packaging and Food/Beverage • Industrial chemical, high-purity and

NSF applications • Flexible and rigid packaging

Industry-leading coupling and connector technology leadership in:

GLOBAL

• Established worldwide sales and distribution network

ABOUT CPC

• Designing and manufacturing quick disconnect couplings and fluid handling solutions since 1978

Machined Brass

Injection Molded Thermoplastics

Dry Break Shutoff Valves

Electronics Integration

Presenter

Presentation Notes

CPC has been designing and manufacturing quick disconnect couplings and fittings since 1978. As seen on the left, our initial product line was a chrome plated brass quick connect. There was a major distinction between this CPC product and any other product on the market at that time, and that was the push button thumb latch with the audible colder “click”. (take a part and show the click) The “click” indicates to the operator that the connection is securely made. This audible click is a feature on nearly all CPC connectors. After the initial machined brass products, CPC moved to injection molding. This move to molding opened up the flood gates in CPC’s product development with thousands of off the shelf couplings in every size, material, and termination imaginable. The innovation continued with the development of double sided dry break shutoff valves that eliminate any fluid dripping upon disconnect of the coupler. Typical shutoff valves have some spitting or fluid inclusion that drip when the connection is separated. The CPC NS2 dry-break couplings valves have less than .01cc of spillage per disconnect. On the right, you will notice a connector with both tubing and wires connecting to it. This is an example of our electronics integration into our fluid handling couplings. This particular part includes RFID identification that essentially allows the connector to transfer data between the male and female halves of the coupling. This data exchange can vary from serial # identification, to reading process parameters associated with a particular assembly. This engineering and innovation is what separate CPC from others in the connector world. CPC engineers fluid handling solutions. This is just a snap shot of the evolution of CPC and shows only a few examples of CPC’s standard products. We have more than 7,000 standard part numbers in every size, material, and termination that you can imagine.

STANDARD PRODUCTS

Subminature Couplings

Breakaway Couplings

PMC, PLC Couplings PMC12, PLC12 Couplings

EFC12 Couplings HFC12 Couplings

STANDARD PRODUCTS

Non-Spill Couplings LQ6 Couplings MC, LC Couplings

Twintube Couplings SixTube Couplings TenTube Couplings

FITTINGS AND ACCESSORIES

OTHER STANDARD CPC PRODUCTS

AseptiQuik® Connectors

DrumQuik® PRO/PUR

Sterile Disconnect Steam-Thru® Connections

Puncture Seal

CUSTOM CAPABILITIES

Minor Modifications Engineered Solutions

Presenter

Presentation Notes

Colder Products Company averages 300 custom design applications per year. As you can see, the complexity of a custom product can vary quite significantly. Starting on the left, there are some very basic and simple changes that can be made to make a connector suitable for your application. Using a special o-ring or spring material or making the part in a special color to match your equipment may seem trivial, but this slight change can really make the difference in a product. From combining several connections into one manifold as shown in the manifold on the left, to supplying a hybrid connector that carries both electrical and air lines in one quick connect, CPC can customize a solution in any way needed to better suit your application and the end users interface.

COMMUNICATING COUPLINGS: HYBRID

Presenter

Presentation Notes

4 Electrical Contacts

2 Non-Spill Connectors

10” pigtail on panel mount

6” Wire Pigtail

8 foot Umbilical

Space for more electrical or fluid

lines

Hose Assembly

Panel Connector

HYBRID CONNECTORS

2 Non-Spill Connectors

(NS2) 4 High Cycle

Contacts

1/8” ID Polyurethane Tubing (Red and Blue)

Integral Umbilical

20 AWG Wires (4)

HYBRID CONNECTORS: WHAT’S INSIDE

HYBRID CONNECTORS: TECHNICAL SPECS

Pressure Rating: Vacuum to 45psi (3.1 bar)

Temperature Rating: -32°F – 120°F (0°C – 49°C)

Materials • Non-wetted components: glass filled polypro and acetal • Wetted components: glass filled polypro • Stainless steel springs and EPDM o-rings

Tubing • Fluid tubing: 1/8” ID Polyurethane (2) • Umbilical: PVC

Electrical Specifications • 20ga wires with gold plated copper alloy high cycle contacts (4) • 24VDC / 3 amp max

HYBRID CONNECTORS: ADVANTAGES

Reduce development time with turnkey solution

Save valuable engineering resource – leverage CPC’s engineering expertise

Streamline quality and purchasing resources – source and qualify a single solution rather than dozens of components

Reduce risk – CPC offers a validated, proven solution

HYBRID CONNECTORS: KEYS TO SUCCESS

Look for applications where the end-user makes multiple connections. Focus on: • Safety • Ease of use • Eliminating misconnections or missing connections

Start with standard product examples: HQC and MHQC

Work across Engineering, Purchasing and Product Managers early in process High return projects require high investment so projects are vetted very carefully

http://www.google.com/url?sa=i&rct=j&q=&esrc=s&frm=1&source=images&cd=&cad=rja&docid=LVJftrDmgR1CHM&tbnid=WlxPfk4MBKJejM:&ved=0CAUQjRw&url=http://www.cetemmsa.com/noticias.php?id=000000012J&id2=000000018O&lang=en&ei=QNNfUouRBKS6yAGHtoCADQ&bvm=bv.54176721,d.aWc&psig=AFQjCNFRrvohYkXx2xYBOnEqk3IXNsD_IQ&ust=1382098102069158

COMMUNICATING COUPLINGS: IDENTIQUIK®

http://colder.larsen.com/index.html


















IDENTIQUIK DEMO

QUESTIONS?

Documents

PowerPoint Presentation FLUID CONNECTIONS . RFID-based IdentiQuik® couplings redefine what's possible for controlling, protecting and streamlining fluid handling processe\൳