Powerful, Reliable and Long Life!.. - Pile Driving … · Powerful, Reliable and Long Life!.. Pile Driving Equipment ... Excavator Mounted Standard (S) ... 252 252 394 394 565 788

Powerful, Reliable and Long Life!..

Pile Driving Equipment

www.oms.com.de

02 CLAMPING DEVICES 29

01 VIBRATORY PILE DRIVERS 7

For various ground conditions and depths, long-life, powerful and high - performance vibratory pile drivers...

Safe connection with piston - clamping system...

OMS hydraulic clamps provide a safe connection between the vibratory piling machine and the pile by using a piston locking system.

KCN Series

SCN Series

ACN Series

CONTENTS

OVR SeriesExcavator Mounted

Standard (S) 20

Variable Moment (VM) 24

Side Grip (SG) 26

04 HYDRAULIC POWER PACKS 45

Smart control system...

Thanks to user friendly electronic remote control and touch screen control panel, minimizes the chance of operator errors.

PP Series

SVR SeriesCrane Suspended

Normal Frequency (NF) 12

Variable Moment (VM) 16

03 SOIL IMPROVEMENT EQUIPMENT 37

OVF SeriesVibroflotation (Stone Column) Equipment

WD SeriesWick Drain WD 28 - 43

OMS is a world brand in the production of vibratory pile driving equipment, with its products performing in all conditions around the globe.

With knowledge gained over more than 29 years, OMS have the desired technical expertise in the manufacturing of vibratory pile driving equipment. OMS contributes to the technological advance of vibratory pile driving equipment with the combination of research and development, an experienced and technical aware team and manufacturing production that is capable to compete in the world market.

OMS, established in 1987, has mastered the design and manufacture of vibratory pile driving / extracting machines, hydraulic power packs, hydraulic clamps, tunnel boring machines and soil improvement equipment. The OMS brand is produced with innovative technology and approach to quality. Today, it is among the companies leading this sector with the products that offers to the world market.

OMS has achieved this success with its experienced team and always working with the motto of maximum efficiency and customer satisfaction.

As a leading company in the vibratory pile driving equipment sector in terms of technology and quality, its priority is to ensure customer satisfaction.

since 1987

OMS Introduction Film

Products and Services

� Crane Suspended Pile Drivers and Extractors,

� Excavator Mounted Pile Drivers and Extractors,

� Hydraulic Clamps,

� Hydraulic Power Packs,

� Vibroflotation Equipment,

� Wick Drain,

� Boring Machines,

� Design and Engineering Application of Product Concept,

� Hiring and Second Hand Options,

� Spare Parts,

� After Sales Services.

Applications

� Construction projects such as harbour, airport, railway, bridge and canal works,

� Infrastructure projects in urban area or city centre such as waste water, pipelines works,

� Soil reinforcement and stabilization works,

www.oms.com.de

4 5

SVR SeriesCrane Suspended

Normal Frequency (NF)

Variable Moment (VM)

OVR SeriesExcavator Mounted

Standard (S)


Side Grip (SG)

VIBRATORYPILE DRIVERS

01

Dynamic Weight md (kg)Dynamic weight is the total weight of vibrator, hydraulic clamp and pile to be driven.

Eccentric Moment M (kgm)The eccentric moment is calculated by the eccentric weight (m) and the distance from the centre of gravity to the rotation axis (r).

Centrifugal Force F (kN)

n: Rotational speed of hydraulic motor (rpm)

Amplitude A (mm)Amplitude is the total vertical displacement of the vibrator during a full rotation of the eccentric weights. Amplitude at maximum rotational speed is obtained with the following formula:

M = Eccentric Moment (kgm)

= Dynamic Weight


www.oms.com.dePile

Hydraulic Hoses

Hydraulic Clamp

Vibration Case (Gear Box)

Power PackVibration Suppressor

Eccentric Weight

Vibratory Pile Driving MachinesOperating Principle of

Vibratory pile driving machines reduce the resistance of the ground with vibration and by changing the formation of the ground. The vibratory piling machine transfers vertical vibrations to the pile via the hydraulic clamp. This in turn, transfers vibration to the ground which reduces the friction between the pile and the ground allowing the pile to be driven or extracted with less force. The pile is driven into the ground by a combination of the vibrators weight and the centrifugal force it creates.

For various ground conditions and depths, long-life, powerful and high-performance vibratory pile drivers...

OMS vibratory pile driving machines are produced with the newest technology and by having the best performance and varying capacity saves time and cost. All piling applications can be conducted free from problem, with 24 / 7 access to technical and spare part support.

Crane Suspended Pile Drivers Excavator Mounted Pile DriversVariable Moment Pile Drivers

www.oms.com.de - - V I B R A T O R Y P I L E D R I V I N G E Q U I P M E N T - -

8 9

Advantages of OMS Vibratory Pile Drivers

� With OMS hydraulic clamps, the ideal solution for every type of piles,

� Innovative structure adapting to fast developing technology,

� Time and cost saving,

� 24/7 technical services and spare part support,

� Powerful, reliable and long life.

Crane suspended (SVR) and Excavator Mounted (OVR) types of vibratory pile driving machines are designed to drive and extract all types of piles including sheet, tube (casing), timber and H-beam, also I-beam and steel plates.

SVR type of vibratory piling machines are recommended in projects requiring a high driving or extracting force. SVR type vibro hammers are powered by OMS Power Packs, which have equipped with remote control and touch screen control panels. These controls are used to adjust the vibrator to suit different ground conditions.

Specially designed OVR excavator mounted vibro hammers are easily adapted to the excavator by connection bracket produced by OMS. They are hydraulically driven by the excavators and easily operated by excavator operator. OVR series excavator mounted vibro hammers requires not any modification on the excavators.

OVR 80 NF

10 11

Technical Spec. SVR 25 NF SVR 30 NF SVR 50 NF SVR 50 NF-1 SVR 80 NF SVR 101 NF SVR 120 NF SVR 165 NF SVR 200 NF SVR 333 NF

Eccentric Moment (kgm) 25,4 30 50,8 50,8 82,4 101,6 120,8 164,8 203,2 333,14

Centrifugal Force (kN) Max. 810 954 1260 1430 2320 2861 2910 3553 4380 7182

Frequency (rpm) 1700 1700 1500 1600 1600 1600 1480 1400 1400 1400

Oil Flow (l/min) 364 416 566 686 960 1372 1273 1680 1792 2800

Power (kW) 194 222 330 366 512 732 742 980 1045 1633

Amplitude (mm) 23 19 27 27 23 24 27 24 19 25

Pulling Force (kN) Max. 314 470 706 706 1060 1060 1060 1060 1412 1836

Weight and Dimensions

Dynamic Weight W/O Clamp (kg) 2200 3100 3780 3780 6900 8600 8840 14740 21700 26800

Total Weight W/O Clamp (kg) 3030 4700 5745 5745 10040 10800 11520 18334 26100 37300

Length / L1 (mm) 1796 2400 2440 2440 3300 2500 2790 3350 2800 4435

Length / L2 (mm) 1550 2490 2490 2490 2920 2600 2600 3060 3120 4300

Height / H (mm) 1748 2042 2085 2085 2408 2904 2899 3058 3584 3808

Width / W1 (mm) 376 412 426 426 428 431 431 428 453 545

Width / W2 (mm) 454 454 460 555 761 715 732 1877 1886 1561

Clamp Types for Sheet Piles SCN 120 SCN 120 SCN 165 SCN 200 SCN 350 SCN 350 SCN 350 - - -

Clamping Force (kN) 1216 1216 1699 2262 3560 3560 3560 - - -

Weight (kg) 840 840 1137 1190 2530 2530 2530 - - -

Clamp Types for Casing KCN 60 x 2 KCN 60 x 2 KCN 80 x 2 KCN 90 x 2 KCN 165 x 2 KCN 165 x 2 KCN 185 x 2 KCN 120 x 4 KCN 165 x 4 KCN 200 x 4

Diameter (min. - max.) / D 300 - 1030 300 - 2100 460 - 1950 460 - 1950 520 - 2300 520 - 2000 520 - 2000 1000 - 3000 1000 - 3000 1130 - 3550

Clamping Force (kN) 643 x 2 643 x 2 814 x 2 890 x 2 1700 x 2 1700 x 2 1865 x 2 1216 x 4 1700 x 4 2260 x 4

Weight (kg) 304 x 2 304 x 2 572 x 2 572 x 2 1172 x 2 1172 x 2 1172 x 2 960 x 4 1172 x 4 1644 x 4

Recommended Power Pack PP 343 PP 343 PP 536 PP 536-1 PP 768 PP 1072 PP 1072 PP 1536 PP 1536 PP 2304

Output (kW) 252 252 394 394 565 788 788 1130 1130 1695

Advantages

� Various clamp types to suit all pile profiles,

� High eccentric moment and vibration amplitude,

� Performance of desired power settings and works can be monitored by the control system,


SVR SeriesCrane Suspended Vibro Hammers

Normal Frequency (NF)

SVR series are designed to drive and extract all types of piles including sheet, tube (casing), timber and H - beam, also I - beam, and steel plates.

SVR series are recommended in projects requiring a high driving or extracting force. SVR type vibro hammers are powered by OMS Power Packs, which have equipped with remote control and touch screen control panels. These controls are used to adjust the vibrator to suit different ground conditions.

High Eccentric Moment and Vibration Amplitude…

W1 L1

H

W2 L2

D (min)

D (max)


12 13

Crane Suspended Vibro Hammers

Selection Chart

10 20 30 40 50 60 70 80 90 100

SVR 120 NF

SVR 200 NF

SVR 165 NF

SVR 101 NF

SVR 50 NF

SVR 30 NF

SVR 25 NF

SVR 20 VM

SVR 25 VM

SVR 35 VM

SVR 40 VM

SVR 30 VM

SVR 50 VM

SVR 10 VM

SVR 16 VM

SVR 7 VM

SVR 80 NF

2 4 6 8 10 12 14 16 18 20 22 24

Driving Depth (m)Model

200

400

600

800

1000

1200

1400

1600

1800

2000

2200

2400

2600

2800

3000

3200

3400

3600

3800

4000

4200

4400

Centrifugal Force (kN

)Centrifugal Force (kN

)

Loose Soil

Medium

-Dense Soil

Very Dense SoilDense Soil

Weight of Pile (ton)

Example Selection

Driving Depth : 25 mWeight : 10 tonSoil Type : Medium-DenseVibro Hammers : SVR 50 NF, SVR 25 VM


14 15

Technical Spec. SVR 7 VM SVR 10 VM SVR 16 VM SVR 20 VM SVR 25 VM SVR 30VM SVR 35 VM SVR 40 VM SVR 50 VM

Eccentric Moment (kgm) 0 - 7,4 0 - 10,6 0-16 0 - 20 0 - 25 0 - 30 0 - 35 0 - 40 0 - 50

Centrifugal Force (kN) Max. 431 617 931 1164 1455 1745 2037 2328 2910

Frequency (rpm) 2300 2300 2300 2300 2300 2300 2300 2300 2300

Oil Flow (l /min) 175 247 370 494 679 776 828 1012 1380

Power (kW) 102 132 216 288 362 452 483 590 805

Amplitude (mm) 12 14 13 13 14 15 15 18 16

Pulling Force (kN) Max. 147 177 470 470 470 706 706 706 706


Dynamic Weight W/O Clamp (kg) 1210 1490 2440 3000 3500 4000 4560 4560 6200

Total Weight W/O Clamp (kg) 1454 1783 3600 4280 4890 5600 6900 6900 8200

Length / L1 (mm) 1235 1340 1850 1850 1850 1850 2462 2462 2500

Length / L2 (mm) 1070 1182 1590 1655 1655 1800 2262 2262 2300

Height / H (mm) 1365 1495 2105 2314 2314 2463 2455 2455 2462

Width / W1 (mm) 255 255 380 380 400 410 430 430 430

Width / W2 (mm) 506 510 600 635 681 723 828 828 980

Clamp Types for Sheet Piles SCN 60 SCN 75 SCN 120 SCN 165 SCN 165 SCN 200 SCN 250 SCN 350 SCN 350

Clamping Force (kN) 643 814 1216 1699 1699 2262 2480 3560 3560

Weight (kg) 335 432 840 1137 1137 1190 1190 2530 2530

Clamp Types for Casing KCN 40 x 2 KCN 40 x 2 KCN 60 x 2 KCN 80 x 2 KCN 90 x 2 KCN 120 x 2 KCN 120 x 2 KCN 165 x 2 KCN 185 x 2

Diameter (min. - max.) / D 290 - 665 290 - 970 300 - 1300 460 - 1260 460 - 1260 540 - 1500 540 - 1500 520 - 1650 520 - 1700

Clamping Force (kN) 425 x 2 425 x 2 643 x 2 814 x 2 890 x 2 1216 x 2 1216 x 2 1700 x 2 1865 x 2

Weight (kg) 188 x 2 188 x 2 304 x 2 572 x 2 572 x 2 960 x 2 960 x 2 1172 x 2 1172 x 2

Recommended Power Pack PP 200-V PP 200-V PP 343-V PP 428-V PP 536 - V PP 768 - V PP 768 - V PP 1072 - V PP 1224 - V

Output (kW) 147 147 252 315 394 565 565 788 900

Advantages

� Environmentally friendly technology,

� Adjustable amplitude,

� Resonance free start - stop,

� Optimum force applying to soil conditions,


Amplitude / eccentric moment can be easily adjusted from minimum to maximum with a variable motor (phase shifter).

The variable moment (phase shifter) of SVR Variable Moment Vibratory Hammers adjusting the position of the eccentric masses according to start and stop of the vibration case (gear box) to not generate resonance. Thus, the vibration case vibrates at maximum frequence and this reduces the disturbance to surrounding soils.

SVR SeriesCrane Suspended Vibro Hammers


D

L1

H

W1

W2 L2


16 17

Fcfc fv

fn

fcfv

fn

Eccentric Masses in Unbalance State(180° Full Power)

Eccentric Masses in Unbalance StateThe phase shifter changes the position of eccentric masses from 0° to 180° that vibratory pile driver can work in maximum amplitude.

Eccentric Masses in Balance StateThe phase shifter changes the position of eccentric masses to balance situation by remote control or control panel which means no resonance.

0

Standard Vibro (NF) Series

Variable Moment Vibro (VM) Series

Full Speed Operation StopStart

Am

plitu

de o

f Soi

l Vib

ratio

n (m

m)

Variable Moment Vibratory DriversOperating Principle of

The “Phase Shifter Motor” patented by OMS, displaces the eccentric masses and allows adjustment of the amplitude.

The model SVR VM is especially suited for driving or extracting piles that are near buildings or historical structures.


18 19

Technical Spec. OVR 20 S OVR 40 S OVR 50 S OVR 60 S OVR 70 S OVR 80 S OVR 120 SEccentric Moment (kgm) 2,11 3,64 4,84 6,34 7,43 9,14 12,44

Centrifugal Force (kN) 145 250 333 436 511 628 925

Centrifugal Force (kN) Max. 175 303 403 527 618 760 1035

Frequency (rpm) 2500 2500 2500 2500 2500 2500 2600

Frequency (rpm) Max. 2750 2750 2750 2750 2750 2750 2750

Oil Flow (l / min) 62 100 151 200 225 274 325

Oil Flow (l / min) Max. 69 110 165 220 247 302 344

Power (kW) 36 58 88 117 131 160 190

Power (kW) Max. 40 64 96 128 144 176 200

Amplitude (mm) 17 14 14 17 15 15 20

Pulling Force (kN) Max. 59 88 147 147 147 235 235

Weight and DimensionsDynamic Weight W/O Clamp (kg) 255 522 700 754 970 1200 1250

Total Weight W/O Clamp (kg) 420 890 1065 1100 1270 1800 2430

Length / L1 (mm) 590 950 1038 1038 1038 1103 1434

Length / L2 (mm) 755 1163 1253 1253 1313 1436 1476

Height / H1 (mm) 1198 1210 1334 1334 1334 1585 1268

Height / H2 (mm) 846 712 776 776 835 926 957

Width / W1 (mm) 234 573 651 651 651 727 731

Width / W2 (mm) 444 295 320 320 320 360 320

Clamp Types for Sheet Piles SCN 20 SCN 30/40 SCN 60 SCN 60 SCN 60/ 75 SCN 75/100 SCN 100Clamping Force (kN) 204 304 - 420 643 643 643 - 814 814 - 1003 1003

Weight (kg) 80 190 - 210 335 335 335 - 432 432 - 515 515

Clamp Types for Casing - - - KCN 40 x 2 KCN 40 x 2 KCN 40 x 2 KCN 60 x 2Diameter (min. - max.) / D - - - 290 - 665 290 - 665 290 - 960 300 - 1000

Clamping Force (kN) - - - 425 x 2 425 x 2 425 x 2 643 x 2

Weight (kg) - - - 188 x 2 188 x 2 188 x 2 304 x 2

Recommended Excavator Working Weight (ton)6 - 12 18 - 22 24 - 26 30 - 35 35 - 36 > 40 > 40

W1

W2

H2

H1

L1

L2

OVR SeriesExcavator Mounted Vibro Hammers

Standard (S)

Specially designed OVR excavator mounted vibro hammers are easily adapted to the excavator by connection bracket produced by OMS. They are hydraulically driven by the excavators and easily operated by excavator operator. OVR series excavator mounted vibro hammers requires not any modification on the excavators. OVR series vibro hammers can be easily used with all types of pile by using the OMS range of hydraulic clamps and provides time and cost saving.

With ergonomic design and high performance, various capacity OMS excavator mounted vibro hammers provide long life, problem free piling application.

High Performance and Pile Driving / Extracting Power!..

D

www.oms.com.de

20 21

Advantages

� Wide range of products,

� Fast, reliable and easy excavator connection,

� Ergonomic design providing practical use,

� Full safe movement around link yoke,

� High-performance and driving/extracting power,

� Minimum vibration transmission to the environment,

� Double or single clamping the steel tube piles can be driven easily and powerfully,

� Powerful, reliable and long-life.

Excavator Mounted Vibro Hammers Oil Pressure & Oil Flow (Optimum)

Q - Flow (l / min)

P - P

ress

ure

(bar

)

55 100 150 200 225 275

320

300

280

260

240

220

200

OVR

20 S

OVR

40 S

OVR

50 S

OVR

60 S

OVR

70 S

OVR

80 S

Excavator Mounted Vibro Hammers Selection Chart

Eccentric Moment (kgm)

60

50

40

30

20

10

0

300

275

250

225

200

175

150

125

100

75

50

25

0

OVR 20 S

OVR 40 S

OVR 50 S

OVR 60 S

OVR 70 S

OVR 80 S

Exca

vato

r Wei

ght (

to)

Exca

vato

r Pow

er (k

W)

2,1 3,66 4,86 7,056,25 9,04


22 23

Technical Spec. OVR 70 VM OVR 100 VM

Eccentric Moment (kgm) Max. 0 - 7,4 0 - 10,6

Centrifugal Force (kN) Max. 431 617

Frequency (rpm) 2300 2300

Oil Flow (l /min) 175 247

Power (kW) 102 132

Amplitude (mm) 12 14

Pulling Force (kN) Max. 147 177


Dynamic Weight W/O Clamp (kg) 1210 1490

Total Weight W/O Clamp (kg) 1454 1783

Length / L1 (mm) 1235 1340

Length / L2 (mm) 1070 1182

Height / H (mm) 1365 1495

Width / W1 (mm) 255 255

Width / W2 (mm) 506 510

Clamp Types for Sheet Piles SCN 60 SCN 75

Clamping Force (kN) 643 814

Weight (kg) 335 432

Clamp Types for Casing KCN 40 x 2 KCN 40 x 2

Diameter (min. - max.) / D 290 - 665 290 - 970

Clamping Force (kN) 425 x 2 425 x 2

Weight (kg) 188 x 2 188 x 2

Recommended Excavator Working Weight (ton)

20 - 28 25 - 35



W1

W2 L2

L1

H

Advantages

� Environmentally friendly technology,

� Adjustable amplitude,

� Resonance free start - stop,

� Optimum force applying to soil conditions,


Amplitude / eccentric moment can be easily adjusted from minimum to maximum with a variable motor (phase shifter).

The variable moment (phase shifter) of OVR Variable Moment Vibratory Hammers adjusting the position of the eccentric masses according to start and stop of the vibration case (gear box) to not generate resonance. Thus, the vibration case vibrates at maximum frequence and this reduces the disturbance to surrounding soils.

www.oms.com.de

24 25

Weight and Dimensions OVR 60 SG OVR 70 SG

Dynamic Weight Without Clamp (kg) 1380 1460

Total Weight Without Clamp (kg) 2790 2870

Length / L (mm) 1420 1420

Height / H (mm) 2260 2260

Width / W1 (mm) 1150 1150

Width / W2 (mm) 1290 1290

Arm Stroke / S (mm) 235 235

Side Gripping Force (kN) 500 500

Bottom Clamping Force (kN) 643 643

Bottom Clamp Weight (kg) 335 335

Recommended Excavator Working Weight (ton)

30 - 35 35

Technical Data OVR 60 SG OVR 70 SG

Eccentric Moment (kgm) 6,3 7,4

Centrifugal Force (kN) 436 511

Centrifugal Force (kN) Max. 527 618

Frequency (rpm) 2500 2500

Frequency (rpm) Max. 2750 2750

Oil Flow (l/min) 200 225

Oil Flow (l/min) Max. 220 247

Power (kW) 117 131

Power (kW) Max. 128 144

Amplitude (mm) 9,2 10

Pulling Force (kN) 176 176

Side Gripping Force (kN) 500 500

Bottom Clamping Force (kN) 643 643

30°

15°

15°

H

360°

L

S

30°

W1


Side Grip (SG)

TUBE PILE DRIVERSSHEET PILE DRIVERS

L

W2

Ø 100 - Ø 600

Arranged for specific pipe diameter. The pipe diameter should be specified up on order.

Side Grip Vibratory Hammer, can handle, pitch and drive the sheet and tube piles. It is capable to accomplish the whole pile driving process without need of manual handling of the piles or assisting machinery.


26 27

KCN Series

SCN Series

ACN Series

CLAMPING DEVICES

02

Advantages

� Tube, sheet and wooden piles can be driven and extracted with the various clamp types.

� Special clamps can be manufactured to suit the customer needs.

� It has a piston locking system allowing it to be safely fixed to the beam.

� Easy-to-use ergonomic design,

� Low clamp weight,

Safe connection with piston - locking system...

OMS hydraulic clamps provide a safe connection between the vibratory pile driving machine and the clamp by using a piston locking system.

OMS hydraulic clamps are manufactured from special alloy casting steel and have two clamping jaws. One is “fixed” other one is “moveable”. The hydraulic clamp contains a hydraulic cylinder which closes the moveable jaw with up to maximum of clamping pressure. The jaws open and close by pushing the “clamp open/close” switch on the remote control. Clamping in and out occurs in a few seconds.

KCN SeriesHydraulic Clamps

W

K

� It is ideal for driving and extracting the various diameters of pipes.

� It has piston-locking system allowing it to be safely fixed to the beam.

� Special alloy beams with high strength.

Technical Spec. KCN 40 KCN 45 KCN 60 KCN 80 KCN 90 KCN 120 KCN 165 KCN 185 KCN 200

Clamping Force (kN) 425 x 2 464 x 2 643 x 2 814 x 2 890 x 2 1216 x 2 1700 x 2 1865 x 2 2260 x 2

Weight (kg) 188 x 2 188 x 2 304 x 2 572 x 2 572 x 2 960 x 2 1172 x 2 1172 x 2 1644 x 2

Working Pressure (bar) 320 350 320 320 350 320 320 350 320

L (mm) 546 546 555 705 705 874 893 893 983

W (mm) 200 200 250 270 270 325 350 350 410

H (mm) 500 500 602 785 785 860 1005 1005 1075

K (mm) 140 140 150 150 150 150 188 188 188

Q (mm) 385 385 405 525 525 670 685 685 740

H

Q

L


30 31

D

L1 W1

H1H2

L1 W1

D

H1

H2

Caisson Beam“H” Type

Caisson Beam“T” Type

Vibro Hammer Clamp Type Diameter / D (mm) L1 (mm) W1 (mm) H1 (mm) H2 (mm) Weight (kg)

min. maks.

SVR 25 NF KCN 60 300 1030 1250 x 1 130 165 65 307

SVR 30 NF KCN 60 300 2100 1245 x 2 130 165 65 150 x 2

SVR 50 NF KCN 80 460 1950 1245 x 2 150 186 76 190 x 2

SVR 50 NF-1 KCN 90 460 1950 1245 x 2 150 186 76 190 x 2

SVR 80 NF KCN 165 520 2300 1460 x 2 188 240 81 365 x 2

SVR 101 NF KCN 165 520 2000 1244 x 2 188 240 88 270 x 2

SVR 120 NF KCN 185 520 2000 1244 x 2 188 240 88 270 x 2

SVR 7 VM KCN 40 290 665 1145 x 1 120 324 44 210

SVR 10 VM KCN 40 290 970 1450 x 1 120 324 44 270

SVR 16 VM KCN 60 300 1300 800 x 2 135 168 69 100 x 2

SVR 20 VM KCN 80 460 1260 900 x 2 150 186 76 150 x 2

SVR 25 VM KCN 90 460 1260 900 x 2 150 186 76 150 x 2

SVR 30 VM KCN 120 540 1500 1150 x 2 168 256 81 288 x 2

SVR 35 VM KCN 165 520 1650 1131 x 2 188 240 88 240 x 2

SVR 40 VM KCN 165 520 1650 1131 x 2 188 240 88 240 x 2

SVR 50 VM KCN 185 520 1700 1150 x 2 188 240 88 250 x 2

Vibro Hammer Clamp Type Diameter / D (mm) L1 (mm) W1 (mm) H1 (mm) H2 (mm) Weight (kg)

min. maks.

SVR 50 NF KCN 80 460 3000 3548 150 568 76 1477

SVR 80 NF KCN 165 520 3000 3620 168 580 81 1943

SVR 101 NF KCN 165 520 3000 3628 188 590 88 2010

SVR 120 NF KCN 185 520 3000 3628 188 590 88 2010

OVR 60 S KCN 40 290 665 1145 120 324 44 210

OVR 70 S KCN 40 290 665 1145 120 324 44 210

OVR 80 S KCN 40 290 960 1450 120 324 44 270

OVR 70 VM KCN 40 290 665 1145 120 324 44 210

OVR 100 VM KCN 40 290 970 1450 120 324 44 270


32 33

SCN SeriesHydraulic Clamps

ACN SeriesHydraulic Clamps

� It is ideal for the driving or extraction of sheet piles.

� It can easily be mounted.

Technical Spec. SCN 20 SCN 30 SCN 40 SCN 60 SCN 75 SCN 100 SCN 120 SCN 165 SCN 200 SCN 250 SCN 350

Clamping Force (kN) 204 304 420 643 814 1003 1216 1699 2262 2480 3560

Weight (kg) 80 190 210 335 432 515 840 1137 1190 1190 2530

Working Pressure (bar) 320 320 320 320 320 320 320 320 320 350 320

L (mm) 410 555 555 653 780 790 1037 978 1072 1072 1343

W (mm) 220 230 230 340 330 330 460 340 380 380 460

H (mm) 300 448 448 497 580 600 771 830 840 840 1130

K (mm) 100 155 155 165 180 180 190 260 280 280 250

Q (mm) 280 340 340 420 531 505 850 770 860 860 1100

* Special clamps can be manufactured to suit the customer needs.

Technical Spec.* ACN 40

Clamping Force (kN) 400

Weight (kg) 800

Working Pressure (bar) 300

L (mm) 875

W (mm) 455

H (mm) 1096

K (mm) 250

Q (mm) 760

H

Q

L

W

K

W

K

Q

H

L


34 35

SOILIMPROVEMENTEQUIPMENT

03

OVF SeriesVibroflotation (Stone Column) Equipment

WD SeriesWick Drain WD 28 - 43

36

L

ProbeGravel

Reservoir

H

W

Feeding Tube

Feeding Mechanism

Monitoring & Reporting

2

46

810

12

1416

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Time (min)

Dept

h (m

)D

rillin

g (m

)

Thrust Pressure (m/s) Thrust Pressure (Pa) Profile (m)

1 1 1

2 2 2

3 3 3

4 4 4

5 5 5

6 6 6

7 7 7

8 8 8

9 9 9

10 10 10

11 11 11

0 1 0 30000000 0,38 0,380

Control Panel of Data Logger

Monitors, which have a membrane keypad and LCD screen, are placed in a waterproof slot. The operator can control the compression process parameters from the screen.

Technical Spec. ÖVF 300 - 2 ÖVF 300 - 2 HF ÖVF 300 - 4 ÖVF 400 - 9 ÖVF 400 - 9 HF

Eccentric Moment (kgm) 2,026 2,026 4 9,1 9,1

Frequency (rpm) 3000/50 3600/60 3000/50 1800/30 2100/35

Centrifugal Force (kN) 200 293 396 329,6 448,6

Power (kW) 90 108 187,5 112,5 131,25

Weight (kg) 1400 1400 2000 2200 2200

Height (H) 2640 2640 3300 3250 3250

Width (W) 348 348 348 434 434

Length (L) 520 520 520 660 660

Power Pack PP 200 PP 200 PP 265 PP 343 PP 343

147 147 195 252 252

When a vibroflotation machine is penetrated into loose ground, it creates a hole. Gravel particles of a certain size are then fed into the hole, either using the top feed or bottom feed method. A stone column is then produced by compressing the gravel with vibration. This increases the supporting strenght of soft and loose grounds and reduces liquefaction risk.

OVF SeriesVibroflotation Equipment

Report

Gauges are used for measurement, the control of vibration used in the compression of the ground and the materials and parameters of infrastructure construction.

� Column Depth � Compression Value

� Column Diameter � Gravel Filling Volume

www.oms.com.de

38 39

Top Feed VibroflotationThe top feed vibroflotation method consisting of firstly the rig or prob is positioned at the point on the ground surface where the compaction or stone column is desired. Then the combined influence of the intensive water jet and vibration enable the prob to penetrate into the soil. This process is allowed to design depth and resulting cavity is filled with material such as coarse chipping, aggregate, gravely sand. The required interaction between the stone column and surrounding soil is developed by the stone infill being compacted. During compaction, the oil pressure indicator on hydraulic power pack indicates efficiency of the pressure acting on the soil and creating compaction.

Bottom Feed VibroflotationThe bottom feed vibroflotation probe suspended crawler crane or leader has a gravel feeding pipe connected with side of the prob and a gravel hooper located on top of vibroflotation probe and also a gravel bucket for filling the gravel hooper which is movable up and down using with crane ropes or leader ropes as an optional.

Positioned vibroflotation prob suspended from a crawler crane or leader allows it to penetrate the soil by simultaneously injecting water and compressed air up to the desired depth. When the desired depth has been reached, the vibroflotation prob pulled up around 1 m and upper gate of gravel pipe opened and the hole created by vibroflotation probe filled by gravel. The vibroflotation probe vibrate and while compacting the probe lowered down until the gauge of hydraulic power pack or electronic data logger indicates that the specified compaction

pressure has been reached. This process is repeated until the vibroflotation has either been extracted completely from the soil or else until its head has arrived at the upper side of the formation that is to be compacted.

All operation can be monitored and recorded by an electronic data logger and the device control the hydraulic oil pressure, gravel volume and depth .


40 41

H

Lead

er P

art

Wic

k D

rain

Boo

m

H3

= 60

00

H1 =

275

0

H4

= 10

00

0H

5 =1

00

00

Technical Data WD 28 - 43Static (crowd) Force (kN) 276

Dynamic Force (kN) 435

Combined Force (kN) 711

Operating Frequency (rpm) 2500

Pressure Max. (bar) 350

Oil Flow Vibro Max. (l/min) 200

Oil Flow Wick Max. (l/min) 506

Mandrel Speed Max. (m/min) 100

Recommended Excavator Working Weight (ton)45 - 50

Weights and DimensionsSuspended Weight (kg) 3700

Length / L (mm) 2040

Height / H1 (mm) 2750

Height / H2 (mm) 432

Width / W (mm) 920

H2

H1

L

W

Mud Scraper

Geotextile Roller

Boom Tip Connector

Leader Headblock

The OMS Wick Drain Insert Machine is a soil improvement machine that to be used for quick consolidation of the cohesive soils. The machine is consisting of; hydromotors, sprocket gears, mandrel and a high frequency vibro hammer. It is very usefull equipment to drain the water in the cohesive soils, thus, the liquefaction risk minimal and settlement time higher then standard procedures.

Operation ProcedureThe hydromotor driven sprocket gears insert the mandrel with Prefabricated Vertical Drain (PVD) in to the cohesive soil until the hard formation. The operator can use the high frequency vibro hammer if necessary to insert the mandrel deeper. The mandrel insert the Prefabricated Vertical Drain up to desired depth and drain stays in the soil then empty mandrel pull out and re-fill with PVD and insertion process starts again.

Advantages

� To prevent excessive settlement of cohesive soils when it is being utilised for construction purposses (roads, airports, bridge and other foundations),

� To enhance the soil stiffness in order to prevent liquefaction and subsequent damage to structures in seimic - sensitive regions,

� To succeed the project in a short time and low cost.

WD SeriesWick Drain WD 28 - 43Bottom Driven “Wick Drain Insert Machine”


42 43

HYDRAULIC POWER PACKS

04

PP Series

44

WL

H

Control Panel

OMS power units can be controlled via the main control panel and instant information in relation to the hydraulic system, engine and retrospective failure logging can be obtained.

� Control Buttons � Function Buttons � Gauges � Function Menus � Operating Hours

Remote Control

The vibrator can be fully controlled by the remote control.

� Engine speed adjustment

� Amplitude / moment adjustment

� Clamp pressure safety lamp

� Vibrator start / stop switch

� Clamp open / close switch

� Clamp open safety switch

� Emergency stop button

Radio Remote ControlTechnical Spec.* PP 200 PP 265 PP 343 PP 428 PP 536 PP 536-1 PP 768 PP 1072 PP 1224 PP 1536

Output (kW) 147 195 252 315 394 394 565 788 900 1130

Output (hP) 200 265 343 428 536 536 768 1072 1224 1536

Oil Flow (lt/min) 360 360 475 684 684 817 950 1634 1548 2200

Working Pressure (bar) 350 350 350 350 350 350 350 350 350 300

Diesel Tank Capacity (lt) 600 600 600 700 700 700 700 1100 1100 1950

Hydraulic Oil Capacity (lt) 350 350 400 600 600 600 600 1650 1650 2350


Length / L (mm) 3700 3700 3700 4200 4200 4200 4500 5000 5000 5000

Width / W (mm) 1590 1590 1590 1790 1790 1790 1800 2350 2350 2350

Height / H (mm) 1935 1935 1935 2135 2380 2380 2380 2173 2173 2173

Weight / kg 3150 3150 3680 4680 5450 5450 6000 9387 9387 12550

* Technical specifications are calculated on maximum pressure and oilflow base. Required flow and pressure can be set according to the needs.

Smart Control System!..

Thanks to user friendly electronic remote control and touch screen control panel, minimizes the chance of operator errors. OMS Power packs predict possible failures and have advanced fault detection technology to enable self-reprogramming. Intelligent control system prevents use outside of idle mode until the system reaches the optimum working conditions.

These features ensure a long life for all components. OMS power units are available with closed or open loop hydraulic systems. Auxiliary systems are fed by one variable flow pump.

Our power units have been custom designed to be easy to maintain and have easy access to all components.

PP SeriesPower Packs

Advantages

� User Friendly,

� Smart Control System,

� Touch Screen Control Panel,

� Predicts Possible Failures,

� High Performance,

� Enable to Self-reprogramming,

� Powerful, Reliable and Long life.

www.oms.com.de

46 47

Russia • Azerbaijan • Turkmenistan • Ukraine • Italy • Poland • Spain • Portugal

Holland • France • England • Germany • Belgium • USA • Mexico • Chile

Madagascar • Yemen • Saudi Arabia • UAE • India • Singapore • New Zealand

Lebanon • Morocco • Iceland • Estonia • Lithuania

On time full support for your installation, maintenance and repair needs...

After sales technical support is just a phone call away...


www.oms.com.de

48

Documents

Powerful, Reliable and Long Life!.. - Pile Driving … · Powerful, Reliable and Long Life!.. Pile Driving Equipment ... Excavator Mounted Standard (S) ... 252 252 394 394 565 788