Contact Info:
In-House Posts, Lathe Info:
Please Note: The development of the requested post processor
will be limited to the information provided on the post request
sheet. Any missing information will delay the creation of the
requested post processor.
Name: Company:
Date
Mastercam Version:
Email Address:
Mastercam SIM #:
Machine Make:
Machine Model:
Control Make:
Machine Setup: Spindles:# of Main # of Sub
Machine & Control Info:
Control Model:
Primary Measurement Units:
Upper Turret 1
Turrets (check each one that is applicable and select the
correct axis):
Lower Turret 1
Lower Turret 2
Axes:
Axes:
Axes:
Axes:
Contact Phone Number:
Upper Turret 2
Web link for machine (if available)
Email Address:
Operator Manual with list of G/M Codes. Mastercam sample file
(customers typical part).
Sample program highlighting proper sequencing of operations.
Machine Tool Dealer Contact Info (if available):
In-House Posts, General Info:
Contact Name:Company:
Contact Phone Number:
Please check off the items listed below that you can provide.
(NOTE: missing info will delay the creation of the post)
Special Functions - Please list in the space provided
below:Special functions are any features in your controller outside
of standard cycles. Examples of special functions include aggregate
heads, probing cycles, tool measurement macros, custom drill and
threading cycles, etc. If unsure about whether a function is
standard, please include details here to err on the side of caution
in order to receive an accurate quote. Documentation should be
provided for all special features of your controller. If no
documentation is available on the parameters of the special
feature, please comment sample code to detail the parameters of the
features.
If more room is required, please email files in plain text, pdf
or word format to [email protected] G65 P6305 X Y Z A R
(G65 - PROGRAM CALL) (P6305 - MEASUREMENT PROGRAM) (XYZ - LOCATION
FOR MEASUREMENT) (A - TOLERANCE) (R - TOOL RADIUS)
Please Note: The development of the requested post processor
will be limited to the information provided on the post request
sheet. Any missing information will delay the creation of the
requested post processor.
form1[0]: GeneralInfo[0]: Name[0]: Company[0]: Company[0]:
Date[0]: MastercamVersion[0]: #subform[1]: Email[0]:
SIM[0]: MachineMake[0]: MachineModel[0]: ControlMake[0]:
ControlMake[0]:
MachineSetup[0]: Main[0]: Sub[0]: ControlModel[0]:
Measurement[0]: CheckBox1[0]: OffCheckBox1[1]: OffCheckBox1[2]:
OffAxes[0]: Axes[1]: Axes[2]: Axes[3]: PhoneNum[0]: CheckBox1[3]:
OffButton1[0]: ResetButton1[0]: PrintButton1[0]:
#subform[1]: Web[0]: Email[0]: CheckBox1[0]: OffCheckBox1[1]:
OffCheckBox1[2]: Off#subform[2]: Name[0]:
Company[0]: PhoneNum[0]: SpecialFeatures[0]: Button2[0]:
PrintButton2[0]: ResetButton2[0]:
