Post Blast of 6 inch thick,Double Rebar Cage Precast Panel

Loss of 25 % of weight of

panel

Many flying projectiles

(large and small)

Structure not serviceable

Possible injury, death and

complete rebuild required

Test Results of Same Blast on HyFi-12K™ Reinforcement

Loss of 2% of weight of panel

Very Little Spalling ( only small

debris)

Structure is very Serviceable

Very little injury, very small

chance of fatal occurrence

Peak pressure 1160 psi,

impulse 67.4 psi-msec

Hybrid Composite Beam Blast PanelBlast Testing Conducted at Baker Risk,

LaVernia, TX October 2011

• 4 x 8 x 1 foot beams

• 3 internal arches per “box”

• Arch thickness 2 inches

• Arch reinforced with electro-welded, galvanizedwire, 90 ksi

• Beam tested at 10, 20, and 40 psi blast over pressure

Hipertex Technical Overview

1POSITION AND FASTEN PANELS

2LAY CHANNELS FOR UTILITIES AND PLUMBING

3FILL (DOUBLE PANEL) AND/OR FINISH WALLS WITH CONCRETE

Construction Concepts for Hiper 3-D

Stair Detail

Wall/Floor Detail

Balcony/Cantilever Detail

Roof/Wall Detail

Wall Section Detail

Stair Section Detail

Cements and Applicators

• Hipertex High Performance Cements and Concretes- high flow SCC concrete- high flow, high adhesion cements for vertical and

over head construction- compressive strengths 8000 – 20,000 psi

• Cement spray applicator- very portable- easy to use and maintain

Mortar Mixing and Pumping Capabilities

14

• Low cost

• High durability, rugged design

• Easy to operate

• Capable of 5 story vertical pumping

• Low pressure pump places product

with no loss of material

• Foamed concrete machines

• Sole supplier of M-TEC pumps for

the US market