Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
0191 419 1111
51 Hutton Close, Crowther Industrial Estate, Washington NE38 0AHSales/Technical: Chris - 07510 599 102 Bill - 07980 025 688 E: [email protected]
poplopseat beds
Visit our showroom to view all our beds
www.campervanbeds.comwww.poptoproofs.co.uk
POPTOP SEAT BED FORMOTOR CARAVAN / CAMPERVAN
Standard Size - Length: 1730mm Width: 1120mm
WHAT YOU GET:
• Steel framed bed with plastic closer trims
• Cushion boards
• Port-a-Potty compartment for easy access
• Gas spring assistance
• Seat Belts fitted
• Storage compartment
OPTIONAL EXTRAS:
• Upholstery
• Bespoke sizes available to order
NLBD4POTTY SEAT
POPTOP SEAT BED SYSTEMS
BudgetSeat Bed
Some of our Suppliers and Installers are listed below.Please call for further information regarding your nearest depot.Acare Leisure Ltd. 01643 703 283 Somerset
Autocraft 01970 871 858 Aberystwyth
Aztec Campers 01792 586 715 Swansea
Bailey Vehicle Conversions 01684 298 279 Gloucester
Camper King Ltd. 01789 721 203 Warwickshire
Cascade Conversions 07815 846 899 Pontyclun
Coast to Coast Campers 01675 446 066 West Midlands
Denby Campervans Ltd. 01538 382 568 Staffordshire
Dubcraft 01584 781 138 Worcestershire
G&P Campers 01889 508 098 Stafford
K2 Campers 01489 799 188 Southampton
Kingston Campers 07446 871 409 Hull
Kustom Sport Ltd. 01226 203 349 Barnsley
Lakeland Windscreens 01539 886 597 Cumbria
Midland Campers 07837 068 396 Nottingham
Mullacott Caravan & Marine 01271 863 066 Ilfracombe
Poppit Campers Ltd. 01239 613 287 Cardigan
Skelmersdale Camper 01695 557 688 Skelmersdale
Sterling Motors 01635 569 444 Redditch
Uberbus 07789 900 904 Dorset
UK Poptops 07792 247 985 Washington
Van Haus 07970 146 872 Rugeley
VW Kampers Ltd. 01273 493 032 Henfield
Wensum Motor 01603 742 806 Norwich
West Coast Conversions 01392 824 045 Exeter
BENEFITS• The design allows the seat to fit
close at rear, allowing extra space at the front.
NLBD5 U-SHAPE
The NLBD1, NLBD2 and NLBD3 Bed Systems are all IVA Compliant, M1 Test Compliant, EC Directive Compliant, VOSA / MOT Compliant,
Full Embossed Certified and Insurance Compliant.
poploproofs.co.uk
51 Hutton Close, Crowther Ind. Est.Washington NE38 0AH
T: 0191 419 111M: 07980 025 688E: [email protected]
POPTOP SEAT BED FORMOTOR CARAVAN / CAMPERVANAllows for bigger seating area.
WHAT YOU GET:• Steel framed bed with plastic closer trims• Cushion boards
• 2x Seat Belts supplied
• Drawings supplied for Cushion Board sizes
OPTIONAL EXTRAS:• Dismountable system to allow walkthrough available to order.
NLBD6SIDE BED
POPTOP SEAT BED FORMOTOR CARAVAN / CAMPERVANStandard & Bespoke sizes available
WHAT YOU GET:• Powder coated Steel framed bed• Cushion boards
OPTIONAL EXTRAS:• Seat Belts
• Sliding drawers
BENEFITS• The design allows the seat to fit close at the
front, allowing extra space at the rear.
• Ideal for combining work space and seating
facility.
• Available in pull forward design to order.
NLBD3 3-SEATERFULL WIDTH
COMBI REAR ACTION
POPTOP SEAT BED FOR CAMPERVAN
Standard Size - Length: 1900mm Width: 1300mm
WHAT YOU GET:
• Steel framed bed with plastic closer trims and cushion boards
• Gas spring assistance to close
• 3-Point Seat Belts fitted
OPTIONAL EXTRAS:
• Upholstery / Bespoke sizes available to order
TESTED ANDCERTIFIED
NLBD3 3-SEATER3/4 FRONT AND REAR ACTION
BENEFITS• The design allows the seat to fit close at rear, allowing extra space at the front.
POPTOP SEAT BED FOR CAMPERVANStandard Size - Length: 1900mm Width: 1500mmWHAT YOU GET:• Steel framed bed with plastic closer trims and cushion boards• Gas spring assistance to close• 3-Point Seat Belts fitted
OPTIONAL EXTRAS:• Upholstery / Bespoke sizes available to order
TESTED ANDCERTIFIED
0191 419 1111 www.campervanbeds.com
üIVA Compliant
ü M1 Test Compliant
ü EC Directive Compliant
ü VOSA / MOT Compliant
ü Full Embossed Certification
ü Insurance Compliant
• Steel design manufactured to a high standard
by qualified engineering and welding experts
• Fully certified
• User friendly design for everyday use
• Full assistance from our technical department
• Seat Belt manufactured to European standard
• German engineered components
• Metal corrosion protective coating
These seats have satisfied the strength and anchorage positional requirements of EC Directive 76/115/EEC as amended by 2005/41/EC & ECE Regulation 14.07 for M1 loading when mounted on a rigid steel frame.
POPTOP SEAT BED SYSTEMS
NLBD1 2-SEATER3/4 RECLINER
BENEFITS• Adjustable back rest for sleeping comfort, watching TV or travelling in relaxed position.• Port-a-Potty and Drawer, day/night safe or small/large drawer can be added now or at later date.• Detachable framework for easy access for maintenance or transport.
This seat has been given the following approvals:• Reduction in widths from 1120 test size• Reduction in height• Reduction in foam
POPTOP SEAT BED FOR MOTOR CARAVAN / CAMPERVAN
Standard Size - Length: 1860mm Width: 1120mm
WHAT YOU GET:
• Steel framed bed with plastic closer trims and cushion boards
• Gas spring back rest adjustment
• Fitting instructions available on certain models
• 3-Point Seat Belts fitted
OPTIONAL EXTRAS:
• Upholstery / Sliding Drawer / Safe
NLBD2 2-SEATER3/4 FORWARD ACTION
TESTED AND
CERTIFIED
POPTOP SEAT BED FOR MOTOR CARAVAN / CAMPERVAN
Standard Size - Length: 1900mm Width: 1120mm
WHAT YOU GET:
• Steel framed bed with plastic closer trims and cushion boards
• Gas spring assistance to close
• 3-Point Seat Belts fitted
OPTIONAL EXTRAS:
• Upholstery / Bespoke sizes available to order
BENEFITS• The design allows the seat to fit close at rear, allowing extra space at the front.
TESTED AND
CERTIFIED
0191 419 1111 www.campervanbeds.com
üIVA Compliant
ü M1 Test Compliant
ü EC Directive Compliant
ü VOSA / MOT Compliant
ü Full Embossed Certification
ü Insurance Compliant
• Steel design manufactured to a high standard
by qualified engineering and welding experts
• Fully certified
• User friendly design for everyday use
• Full assistance from our technical department
• Seat Belt manufactured to European standard
• German engineered components
• Metal corrosion protective coating
These seats have satisfied the strength and anchorage positional requirements of EC Directive 76/115/EEC as amended by 2005/41/EC & ECE Regulation 14.07 for M1 loading when mounted on a rigid steel frame.