Polypipe TDI

1For prices see the Polypipe Below Ground Drainage Trade Price List

TDI Product Guide

Polypipe TDI

TDIPG1 July 2018

1For prices see the Polypipe Below Ground Drainage Trade Price List

2 [email protected] For prices see the Polypipe Below Ground Drainage Trade Price List

Polypipe TDI manufactures a full range of insulated DPCs and Thermal Insulation Systems, designed to comply with the thermal resistance requirements of Part L Building Regulations.

This product range includes:• Wall Cavity Closers, Damp Proofing and Insulation

• Non-Combustible Insulated Cavity Closers

• Insulated Cavity Closer Sub Frame Kits

• Insulated DPCs

• Non-Combustible Insulated DPCs

• Non-Combustible Insulated Acoustic Cavity Socks

• Insulated Loft Hatches

For more information and prices, see the Polypipe Below Ground Drainge Trade Price List, or visit: www.polypipe.com/tdi

For installation information and thermal conductivity data, see the TDI Installation Guide.

For more information on Polypipe TDI products, please email: [email protected]

Contents

Cavity Closer - Open Cavity 4 - 23

MULTICORFLEX 4

MULTICOREXL244 5

WCMULTICOR 6

WCMULTICOR150 7

WCM50 8

WCM75 9

WCFMULTICOR 10

WEATHERCOR F 11

WEATHERCOR F 0.25 12-13

THERMOCOR CC 14-15

FIRESTOP 16-17

FIRESTOP 0.25 18-19

RIGIDCOR F 20

RIGIDCOR F 0.25 21

RIGIDCOR F ACCESSORIES 22

HYCOR SYSTEM 3000 F 23

Cavity Closer - Closed Cavity 24 - 26

DAMCOR 24

STONECOR 25

STONECOR 0.25 26

Cavity Closer - Party Wall 27CAVITY STOP 27

Cavity Sock 28 - 29

CAVITY SOCK 28 - 29

Loft Hatch 30 - 31

LOFT HATCH 30 - 31

Welcome to Polypipe TDI


MULTICORFLEX

Cavity Closer - Open Cavity Length Width Insulation Pack

MULTICORFLEX 2.44m 50-100mm 100mm x 28mm 10

Product Label

TDI MULTICOR®

RIGIDCAVITY CLOSURE

TEL: 01709 772296FAX: 01709 770001

Email: [email protected]

www.polypipe.com

MULTICOREXL244


MULTICOREXL244 2.44m 50-100mm 100mm x 25mm 10

Product Label

TDI MULTICOR®

RIGIDCAVITY CLOSURE

TEL: 01709 772296FAX: 01709 770001


www.polypipe.com

Cavity Closer - Open Cavity Cavity Closer - Open Cavity

An insulated cavity closer that fits all cavities up to 100mm and is suitable for use in severe weather conditions. Simply cut to required size on site.

A one size fits all insulated cavity closer that is suitable for use in severe weather conditions. Squeezes to size on site to fit cavities from 50mm - 100mm with no need to cut.


WCMULTICOR


WCMULTICOR 2.44m 50-100mm 100mm x 28mm 10

Product Label

TDI MULTICOR®

RIGIDCAVITY CLOSURE

TEL: 01709 772296FAX: 01709 770001


www.polypipe.com


WCMULTICOR150 2.44m 100-150mm 150mm x 28mm 10

Product Label

TDI MULTICOR®

RIGIDCAVITY CLOSURE

TEL: 01709 772296FAX: 01709 770001


www.polypipe.com

WCMULTICOR150

Cavity Closer - Open Cavity Cavity Closer - Open Cavity




WCM50


WCM50 2.44m 50mm 28mm 10

Product Label

TDI MULTICOR®

RIGIDCAVITY CLOSURE

TEL: 01709 772296FAX: 01709 770001


www.polypipe.com

WCM75

Product Label

TDI MULTICOR®

RIGIDCAVITY CLOSURE

TEL: 01709 772296FAX: 01709 770001


www.polypipe.com


WCM75 2.44m 75mm 28mm 10

Cavity Closer - Open Cavity

An insulated cavity closer for use in 50mm cavities which is suitable for use in severe weather conditions.

An insulated cavity closer for use in 75mm cavities which is suitable for use in severe weather conditions.



WCMULTICOR


WCF50 2.44m 50mm 28mm 10

WCF65 2.44m 65mm 28mm 10

WCF75 2.44m 75mm 28mm 10

WCF85 2.44m 85mm 28mm 10

WCF90 2.44m 90mm 28mm 10

WCF100 2.44m 100mm 28mm 10

WCF125 2.44m 125mm 28mm 5

WCF140 2.44m 140mm 28mm 5

WCF150 2.44m 150mm 28mm 5

WCF200 2.44m 200mm 28mm 5

Product Label

TEL: 01709 772296FAX: 01709 770001


www.polypipe.com

TDI WEATHERCOR®

NON COMBUSTIBLE RIGID CAVITY CLOSURE


WCFMULTICOR 2.44m 50-100mm 28mm 10

WEATHERCOR F


Part of the Weathercor F range of cavity closers, WCFMULTICOR is a fireproof, insulated cavity closer that fits all cavities up to 100mm and provides 30 minutes fire integrity. Simply cut to required size on site.

The Weathercor F range of cavity closers are fireproof, insulated cavity closers, available in sizes to fit cavities from 50mm to 200mm and provide 30 minutes fire integrity.

Product LabelPlease see product label on Page 10.

Fire Integrity (Warrington Fire) Fire Integrity (Warrington Fire)



WEATHERCOR F 0.25

Product Label

TEL: 01709 772296FAX: 01709 770001


www.polypipe.com

TDI WEATHERCOR®

NON COMBUSTIBLE RIGID CAVITY CLOSURE


GWC50 2.44m 50mm 28mm 10

GWC65 2.44m 65mm 28mm 10

GWC75 2.44m 75mm 28mm 10

GWC90 2.44m 90mm 28mm 10

GWC100 2.44m 100mm 28mm 10

GWC125 2.44m 125mm 28mm 10

The Weathercor F 0.25 range of cavity closers are fireproof, with improved ‘u’ values. They are available in sizes to fit cavities ftom 50mm to 125mm and provide 30 minutes fire integrity.

Fire Integrity (Warrington Fire)

0.25U value Increased Energy Efficieny

‘u’ Values

0.25U value



THERMOCOR CC

Product Label

TDI THERMOCOR®

INSULATINGCAVITY CLOSURE

TEL: 01709 772296FAX: 01709 770001


www.polypipe.com


TC50 2.44m 50mm 34mm 20

TC65 2.44m 65mm 34mm 20

TC75 2.44m 75mm 34mm 20

TC85 2.44m 85mm 34mm 20

TC90 2.44m 90mm 34mm 20

TC100 2.44m 100mm 34mm 20

TC110 2.44m 110mm 34mm 15

TC125 2.44m 125mm 34mm 15

TC150 2.44m 150mm 34mm 10

An expanded polystyrene insulation core, completely enclosed in polyethylene DPC for maximum protection against water penetration. Available in sizes to fit cavities from 50mm to 150mm.


FIRESTOP

Product Label

TDI FIRESTOP®

CAVITY BARRIERNON COMBUSTIBLE INSULATED

CAVITY CLOSURE WITH TRADITIONAL DPC

TEL: 01709 772296FAX: 01709 770001


www.polypipe.com


FS50 2.44m 50mm 40mm 20

FS65 2.44m 65mm 40mm 20

FS70 2.44m 70mm 40mm 20

FS75 2.44m 75mm 40mm 20

FS80 2.44m 80mm 40mm 20

FS85 2.44m 85mm 40mm 20

FS90 2.44m 90mm 40mm 20

FS100 2.44m 100mm 40mm 20

FS110 2.44m 110mm 40mm 10

FS120 2.44m 120mm 40mm 10

FS125 2.44m 125mm 40mm 10

FS130 2.44m 130mm 40mm 10

FS140 2.44m 140mm 40mm 10

FS150 2.44m 150mm 40mm 10

FS175 2.44m 175mm 40mm 5

FS200 2.44m 200mm 40mm 5

A non-combustible insulation core, completely enclosed in polyethylene DPC for maximum protection against water penetration and 60 minutes fire integrity. Available in sizes to fit cavities from 50mm to 200mm.



FIRESTOP 0.25

Product Label

TDI FIRESTOP®

CAVITY BARRIERNON COMBUSTIBLE INSULATED

CAVITY CLOSURE WITH TRADITIONAL DPC

TEL: 01709 772296FAX: 01709 770001


www.polypipe.com


GFS50 2.44m 50mm 40mm 20

GFS65 2.44m 65mm 40mm 20

GFS75 2.44m 75mm 40mm 20

GFS85 2.44m 85mm 40mm 20

GFS90 2.44m 90mm 40mm 20

GFS100 2.44m 100mm 40mm 20

A non-combustible insulation core, completely enclosed in polyethylene DPC for maximum protection against water penetration and 60 minutes fire integrity. Offering improved ‘u’ values and available in sizes to fit cavities from 50mm to 100mm.


‘u’ Values


0.25U value


RIGIDCOR F RIGIDCOR F 0.25


RCF50 2.44m 50mm 28mm 5

RCF75 2.44m 75mm 28mm 5

RCF85 2.44m 85mm 28mm 5

RCF100 2.44m 100mm 28mm 5

RCF120 2.44m 120mm 28mm 5


GRC75 2.44m 75mm 28mm 5

GRC85 2.44m 85mm 28mm 5

GRC100 2.44m 100mm 28mm 5

2.44m 120mm 28mm 5


An insulated cavity closer, encased in PVCu, offering 30 minutes fire integrity. Available in sizes to fit cavities from 50mm to 120mm.

An insulated cavity closer, encased in PVCu, offering 30 minutes fire integrity and improved ‘u’ values. Available in sizes to fit cavities from 75mm to 120mm.



‘u’ Values

0.25U value




RIGIDCOR F Accessories

Rigidcor F Corners

Width Pack

RCFC50 50mm 1

RCFC75 75mm 1

RCFC85 85mm 1

RCFC100 100mm 1

RCFC120 120mm 1

The new HYCOR SYSTEM is an insulated cavity closer that is suitable for use in severe weather conditions and offers a 30 minutes fire integrity version.

Made from high quality PVCu with corners, joining pieces and clip in adjustable wall ties available to eliminate all waste. Accepts any size or style of window system and does not require dry lining or plaster to conform to Building Regulations.

We supply in kit form cut to size and ready to install as a sub-frame that can then be built around.

Available in cavity sizes 50mm, 75mm, 85mm, 100mm and 120mm.

Can be manufactured to suit step reveal applications.

HYCOR SYSTEM

RIGIDCOR F Brick Ties


Rigidcor F Corners

Brick Ties Pack

RCFBRKTIES -

0.25U value



‘u’ Values High Performance Weather Seal

New Structural Support

New Rigid Corner Construction

NEW

25For prices see the Polypipe Below Ground Drainage Trade Price List24 [email protected]

DAMCOR

Cavity Closer - Closed Cavity

Cavity Closer - Closed Cavity Length DPC Width Insulation Qnty.

DC165 6m 165mm 100mm x 18mm 8

DC225 6m 225mm 150mm x 18mm 6

STONECOR


SC165 10m 165mm 100mm x 25mm 5

SC225 10m 225mm 150mm x 25mm 5


DAMCOR®

Insulating DPC & Cavity Barrier

Polypipe TDIwww.polypipe.com/tdiTel: +44 1709 770000Fax: +44 1709 770001

Doncaster, Yorkshire

Polypipe TDI STONECOR®

Non Combustible Insulating DPC & Cavity Barrier

www.polypipe.com/tdiTel: +44 1709 770000Fax: +44 1709 770001


Product Label Product Label

An insulated DPC to provide a complete and simple solution to thermal bridging where the cavity is closed.

An insulated DPC to provide a complete and simple solution to thermal bridging where the cavity is closed, along with 30 minutes fire integrity.



Cavity Closer - Party Wall

CAVITY STOP

Cavity Closer - Closed Cavity Length Dimensions Insulation Qnty.

CS340X260X100 7.5m 340mm 260 x 100mm 2

CS340X300X100 7.5m 340mm 300 x 100mm 2

CS400X300X100 7.5m 400mm 300 x 100mm 2

STONECOR 0.25



GSC165 10m 165mm 100mm x 25mm 5

GSC225 10m 225mm 150mm x 25mm 5

Polypipe TDI STONECOR®

Non Combustible Insulating DPC & Cavity Barrier

www.polypipe.com/tdiTel: +44 1709 770000Fax: +44 1709 770001


Product Label

An insulated DPC to provide a complete and simple solution to thermal bridging where the cavity is closed, along with 30 minutes fire integrity and improved ‘u’ values.

An insulated DPC which complies with all acoustic requirements for party walls and offers 60 minutes fire integrity.



‘u’ Values

0.25U value


[email protected] For prices see the Polypipe Below Ground Drainage Trade Price List

Stonecor 0.25®‘u’ value range

2828 [email protected]

Acoustic Cavity Sock

CAVITY SOCK

Acoustic Cavity Sock Length Insulation Quantity

CSOCK75X50 2.44m 75mm x 50mm 1


CSOCK100X50 2.44m 100mm x 50mm 1

CSOCK140X50 2.44m 140mm x 50mm 1

CSOCK100X70 2.44m 100mm x 70mm 1




CSOCK100X75 2.44m 100mm x 75mm 1

CSOCK125X75 2.44m 125mm x 75mm 1

CSOCK150X75 2.44m 150mm x 75mm 1

CSOCK155X75 2.44m 155mm x 75mm 1

CSOCK175X75 2.44m 175mm x 75mm 1

CSOCK275X75 2.44m 275mm x 75mm 1



CSOCK100X50 2.44m 100mm x 50mm 1

CSOCK100X70 2.44m 100mm x 70mm 1

CSOCK100X75 1.22m 100mm x 75mm 1

CSOCK100X100 2.44m 100mm x 100mm 1

CSOCK125X100 2.44m 125mm x 100mm 1

CSOCK150X100 2.44m 150mm x 100mm 1

CSOCK170X100 2.44m 170mm x 100mm 1

CSOCK200X100 2.44m 200mm x 100mm 1

CSOCK300X100 2.44m 300mm x 100mm 1

Designed to restrict the spread of fire and smoke in concealed cavities, particularly within external masonry or timber framed walls.

Polypipe TDI’s Cavity Socks offers 2 hours fire integrity and complies with acoustic requirements of Building Regulations Part E.


[email protected] For prices see the Polypipe Below Ground Drainage Trade Price List30 31

Loft Hatch

For prices see the Polypipe Below Ground Drainage Trade Price List

Loft Hatch Code

Hinge down uninsulated quarter turn catch (c/w Opening Handle). LH4

Loft Hatch Code

Hinge down uninsulated lockable. LH4WL

Loft Hatch Code

0.25U value

Hinge down insulated quarter turn catch 0.25 "U" Value (c/w Opening Handle).

LH.25

Loft Hatch Code

0.35U value

Hinge down insulated quarter turn catch 0.35 "U" Value (c/w Opening Handle).

.35TDI

Loft Hatch Code

0.35U valueHinge down insulated lockable 0.35 "U" Value. .35TDIWL

LOFT HATCH

B

D

C

A

EF

B

D

C

A

EF

A 733mm

B 656mm

C 639mm

D 562mm

E 600mm

F 532mm

Insulated Uninsulated

Range includes products which achieve 0.35 ‘U’ value to comply with Building Regulations Part L1 & L2 (as per Robust Details 1st April 2002).

Clear opening 600mm x 532mm (Overall size 733 x 656mm).

• Injection moulded rigid polypropylene outer hatch, no welded corners.

• Attractive moulded ceiling architrave surround and trap door sculpture

• Easy access for loft ladders, simple to fit, supplied in a box with fitting instructions.

• Meets all Building Regulations for insulated loft hatches.

• Factory assembled for easy fitting.

0.35U value

0.25U value

Polypipe TDIProduct Guide

Polypipe UlsterDromore Road, Lurgan Craigavon, Co. Armagh, BT66 7HL, UK

T: +44 28 38 881270 F: +44 28 38 882344

Polypipe Building Products2410 London Road, Mount Vernon, Glasgow, G32 8XZ, UK

T: +44 141 778 8822 F: +44 141 778 2703

Polypipe Building ProductsBroomhouse Lane, Edlington, Doncaster, DN12 1ES, UK

T: +44 1709 770000 F: +44 1709 770001

Documents

Polypipe TDI