Polyethylene Water Tubing 2007 5

800-327-4735

Flying W Plastics, Inc.

POLYETHYLENE WATER PIPE (TUBING)PE3608 (PE3408) HIGH DENSITY

POLYETHYLENE

NSF Listed and meets AWWA standards for potable waterFlying "W" Plastics manufactures high density polyethylene water

pipe in various sizes and speci�cations to meet the followingstandards:

ASTM D2239SIDR Controlled Inside Diameter (Titan

Supreme)ASTM D2737

C.T.S. Tubing (Titan Supreme C.T.S.)

All PE3608 (PE3408) potable water pipe comes with a 50 yearWarranty (See Warranty Statement for details) and is available in

various diameter sizes and lengths. To place an order or to contacta distributor in your area, please call us at 800-327-4735 or visit us

on the web at www.�yingwplastics.com.

1

800-327-4735


NSF International (NSF) Official Listing

This is a Certification by NSF that these products conform to the requirements of NSF Standard 14 –Plastics Piping Components and Related Materials

FLYING “W” PLASTICS52 VAN HORN DRIVEPO BOX 759 GLENVILLE, WV 26351304-462-5779

Item Description/ Trade Designation PerformanceMaterial Class Potable Water – Pipe and Fittings Standard01 Pipe

PE 3608 (3408) FLYING “W” TITAN SUPREME ASTM D 2239½” thru 2” SIDR 5.3½” thru 2” SIDR 7½” thru 2” SIDR 9½” thru 6” SIDR 11.5½” thru 6” SIDR 15½” thru 6” SIDR 1901 Pipe

PE 3608 (3408) FLYING “W” SPEC I ASTM D3035½” thru 14” SDR-PR 11½” thru 14” SDR-PR 13.5½” thru 14” SDR-PR 17½” thru 14” SDR-PR 2101 Tubing

PE3608 (3408) FLYING “W” TITAN SUPREME ASTM D2737½” thru 2” SDR 9½” thru 2” SDR 1101 Pipe

PE3608 (3408) FLYING “W” SPEC II ASTM F7143” thru 14” DR 7.33” thru 14” DR 93” thru 14” DR 113” thru 14” DR 15.53” thru 14” DR 173” thru 14” DR 213” thru 14” DR 263” thru 14” DR 32.53” and 14” DR 9.3

2

800-327-4735


Product SpecificationFlying “W” Plastics certifies its Titan Supreme, CTS, SIDR Potable Water Pipes and Geo-thermal Pipes to be

manufactured from select PE3608 (PE3408) high density polyethylene copolymers (see typical properties below) and meet specifications set forth in ASTM D-2239, ASTM D-2737, and ASTM D3350. This material meets all of the

requirements of ASTM 1248-81A for type PE34 Class C Product. It has outstanding properties of a high hoop stress and a high level of environmental stress crack resistance. These copolymers have NSF 14 and AWWA C901

certification for potable water applications, comply with ANSI/NSF Standard 61 health effects requirement, and are recognized by the Plastics Pipe Institute as having a pipe material designation code of PE3608, PE3408 and PE80.

TYPICAL PROPERTIES1 English Values SI Vaues ASTM Method

D 3350345464C345464CCell Classification

D 16032.3%2.3%Carbon Black Concentration

F 1473>100 hrs>100 hrsNotch Tensile (PENT)

F 1248>5000 hrs>5000 hrsPipe ring ESCR6

D 1693>5000 hrs>5000 hrsEnvironmental Stress Crack Resistance5


ISO 90808.0 MPa-Minimum Required Strength

D 2837D 2837

11.0 MPa5.5 MPa

1600 psi800 psi

Hydrostatic Design Basis@ 23 *C@ 60 *C

D 746<-118 *C<-180 *FBrittleness Temperature

D 1525126 *C259 *FVicat Softening Point

D 22406868Hardness (Shore D)

D 2560.32 kj/m6 ft-lbf/inNotched Izod Impact Strength

D 790827 MPa120,000 pisFlexural Modulus3

D 638>600%>600%Elongation @ Break (2 in/min)

D 638D 638

22.8 MPa31.0 MPa

3300 psi4500 psi

Tensile Strength@ Yield (2 in/min)@ Break (2 in/min)

D 123812.5 g/cc-Melt Index2

D 48830.955 g/cc-Density (Black)

1Typical properties will vary within specification limits2190 degrees C/21,100g32% Secant-Method 1

4Condition B, 10%5Condition C6Two inch, SIDR 19

3

800-327-4735


TITAN SUPREME Water Pipe (SIDR)

Titan Supreme is manufactured in accordance with ASTM D-2239 specifications. It is designed for use in pressure applications for potable water.

Titan Supreme is an inside diameter (I.D.) controlled pipe (SIDR) with operating water pressures of 100psi, 125psi, 160psi and 200psi at 23*C (73*F) depending on wall thickness. It has NSF Standard 14 certification and meets

AWWA C901 specifications. It is manufactured with a PE3608 (PE3408) Class C high density polyethylene resin (see ASTM D-2239, and/or ASTM D-3350

for detailed specifications) and is available in various sizes and lengths.

Color Coded Inventory SystemTitan Supreme is color coded by wrapping each coil with color tape which

indicates the pressure rating (PSI) and the exact footage of the coil. This same color is also found on the print line of the pipe itself. This eliminates costly

inventory and shipping problems.

CURRENT COLOR CODES:BLUE …………100PSIRED ..………….125PSIWHITE ………..160PSIYELLOW ………200PSIORANGE …..200PSI CTS

4

800-327-4735


$102.8328,000’100’200’41.6#0.138”2.067”W1061

W10622”

$63.7832,000’100’250’300’

25.4#0.107”1.610”W1051W1052W1053

1 ½”

$41.8050,000’100’300’18.7#0.092”1.380”W1041

W10431 ¼”

$24.1890,000’100’200’300’

10.8#0.070”1.049”W1031W1032W1033

1”

$16.28110,000’100’400’7.5#0.060”0.824”W1021

W1024¾”

$12.68180,000’100’400’5.8#0.060”0.622”W1011

W1014½”

List PricePer 100’

Max. ft.Truckload

Coil/JointLength/ft

WeightPer 100’

WallThickness

NominalI. D.

Part NumberSIZES

ASTM – D – 2239 POLYETHYLENE PLASTIC PIPE (SIDR 15)

Based on Controlled Inside Diameter Water PipeMeets or Exceeds NSF Standard 14 & AWWA C901

♦100 PSI TITAN SUPREME SIDR 15 PE3608 (PE3408)

5

•3-6” and other lengths available upon request

800-327-4735


ASTM – D – 2239 POLYETHYLENE PLASTIC PIPE (SIDR 11.5)Based on Controlled Inside Diameter Water Pipe

Meets or Exceeds NSF Standard 14 & AWWA C901

$132.9828,000’100’200’56.0#0.180”2.067”W1261

W12622”

$78.8532,000’100’250’34.0#0.140”1.610”W1251

W12521 ½”

$54.7050,000’100’300’25.0#0.120”1.380”W1241

W12431 ¼”

$31.6590,000’100’300’500’

14.4#0.091”1.049”W1231W1233W1235

1”

$19.90110,000’100’400’8.8#0.072”0.824”W1221

W1224¾”

$14.25180,000’

100’200’300’400’

6.0#0.060”0.622”

W1211W1212W1213W1214

½”


Max. ft.Truckload

Coil/JointLength/ft

WeightPer 100’

WallThickness

NominalI. D.

Part Number

SIZES


6

♦125 PSI TITAN SUPREME SIDR 11.5 PE3608 (PE3408)

800-327-4735


$180.2028,000’100’200’72.9#0.230”2.067”W1661

W16622”

$109.0032,000’100’250’44.1#0.179”1.610”W1651

W16521 ½”

$68.0050,000’100’300’32.1#0.153”1.380”W1641

W16431 ¼”

$39.4090,000’100’300’500’

18.6#0.117”1.049”W1631W1633W1635

1”

$24.38110,000’100’400’11.5#0.092”0.824”W1621

W1624¾”

$15.30180,000’

100’200’300’400’

6.7#0.069”0.622”

W1611W1612W1613W1614

½”

List Price

Per 100’

Max. ft.Truckload

Coil/JointLength/ft

WeightPer 100’

WallThickness

NominalI. D.

Part Number

SIZES



♦160 PSI TITAN SUPREME SIDR 9 PE3608 (PE3408)


7

800-327-4735


$230.3828,000’100’200’96.5#0.295”2.067”

W2051W20522”

$144.8532,000’100’250’58.6#0.230”1.610”

W2041W20421 ½”

$87.9350,000’100’300’500’

43.0#0.197”1.380”W2031W2033W2035

1 ¼”

$51.2890,000’

100’300’500’

1000’24.9#0.150”1.049”

W2021W2023W2025W2020

1”

$32.00110,000’

100’400’500’

1000’15.3#0.118”0.824”

W2011W2014W2015W2010

¾”

$20.45180,000’100’400’9.0#0.089”0.622”

W2001W2004½”

List Price

Per 100’

Max. ft.Truckload

Coil/JointLength/ft

WeightPer 100’

WallThickness

NominalI. D.

Part Number

SIZES


8



♦200 PSI TITAN SUPREME SIDR 7 PE3608 (PE3408

800-327-4735


ASTM D-2737PE3608 POLYETHYLENE PLASTIC TUBING

Copper Tube Sized (C.T.S.) Water PipeBased on Controlled Outside Diameter

Meets or Exceeds NSF Standard 14 & AWWA C901

$142.6323,000’100’200’62.0#0.236”2.125”C2051

C20522”

$83.5528,000’100’250’36.0#0.181”1.625”C2041

C20421 ½”

$54.7042,000’100’300’500’

26.0#0.153”1.375”C2031C2033C2035

1 ¼”

$36.3885,000’

100’300’500’1000’

17.0#0.125”1.125”

C2021C2023C2025C2020

1”

$23.96100,000’100’400’500’

10.5#0.097”0.875”C2011C2014C2015

¾”

$20.85160,000’100’400’5.5#0.069”0.625”C2001

C2004½”


Max. ft.Truckload

Coil/JointLength/ft

WeightPer 100’

WallThickness

NominalO. D.

Part Number

SIZES

♦ 200 PSI TITAN SUPREME C.T.S. SDR 9 PE3608 (PE3408)

9


800-327-4735


50 Year Limited Warranty

Flying “W” Plastics warrants its Titan Supreme, Titan Supreme C.T.S., Spec I, and Spec II pipe against rot, rust, material flaws, structural weaknesses and electrolytic corrosion and warrants it to be free from defect in materials and workmanship for a period of fifty (50) years from date of purchase by and to the original installer only. Flying “W” Plastics expressly limits its responsibility under this Limited Warranty to the following:

1. Flying “W” Plastics Inc., will provide an equivalent amount of plastic pipe of like size and grade to that amount which it acknowledges to be defective, to the original installer only.

2. Flying “W” Plastics, Inc., will pay up to one dollar ($1.00) per lineal foot for labor charges actually incurred by the original installer in replacement of pipe warranted hereby, which pipe is acknowledged to be defective within five (5) years of the date of purchase by the original installer only, with a pro rata reduction of said amount thereafter for the remaining forty-five (45) years of this Limited Warranty.

A sample measuring a minimum of twenty-four inches (24”) in length, bearing the Flying “W” Plastics trademark, for any segment of pipe alleged by the original purchaser only to be defective, must be submitted to Flying “W” Plastics for inspection and testing. Any plastic pipe of Flying “W” Plastics thereafter acknowledged to be defective shall be exchanged as aforesaid, and Flying “W”Plastics shall assume the reasonable costs of transportation thereof to the point of the original delivery.

Purchaser assumes all risk and liability for loss, damages or injury to persons or property of buyer or other parties arising out of use or possession of materials and products of Flying “W” Plastics, Inc.

There are no warranties which extend beyond the description on the face thereof.

10

800-327-4735


$31.0836,000’100’300’18.7#0.092”1.380”UP1041

UP10431 ¼”

$17.9770,000’

100’200’300’500’

1000’

10.8#0.070”1.049”

UP1031UP1032UP1033UP1035UP1030

1”

$12.0980,000’100’400’7.5#0.060”0.824”UP1021

UP1024¾”

$ 9.41120,000’100’400’5.8#0.060”0.622”UP1011

UP1014½”

List PricePer

100’

Max. ft.Truckload

Coil/JointLength/ft

WeightPer 100’

WallThickness

NominalI. D.

Part Number

SIZES

$289.1215,120’20’40’159.2#0.258”4.596”UP1082

UP10844”

$164.455,000’100’90.5#0.230”3.494”UP10713”

$75.5621,000’100’200’41.6#0.138”2.067”UP1061

UP10622”

$46.1424,000’100’250’300’

25.4#0.107”1.610”UP1051UP1052UP1053

1 ½”

PIONEER – UTILITY HDPE NON-POTABLE WATER PIPEPOLYTHYLENE PLASTIC PIPE (SIDR)

Based on Controlled Inside Diameter Water Pipe

•MAX. WORKING WATER PRESSURE – 100PSI

•MAX. WORKING WATER PRESSURE – 80PSI

Recommended for low pressure, non-potable applications (ie., mine or agricultural drainage)

11

800-327-4735


PE3608 (PE3408) INDUSTRIAL / WATER PIPE

NSF Listed and meets AWWA standards for potable water

Flying "W" Plastics manufactures high density polyethylene water pipe in various sizes and specifications to meet the following standards:

ASTM D3035 NSF 14, AWWA C901 IPS Sizes

Controlled Outside Diameter 1/2" - 2" (Spec I)

ASTM F714 NSF 14, AWWA C906

Controlled Outside Diameter 3" - 12" (Spec II)IPS and DIPS Sizes

Applications:egaweS lapicinuMtropsnarT retaWsdiuqiL ssecorP lairtsudnIegaweS citsemoDseirrulSstneulffE

12

800-327-4735


Product SpecificationFlying “W” Plastics certifies its SPEC I, SPEC II and Geo-thermal Pipes to be manufactured from select PE3608 (PE3408) high density polyethylene copolymers (see typical properties below) and meet specifications set forth in

ASTM D-3035, ASTM D-3350, and ASTM F-714. This material meets all of the requirements of ASTM 1248-81A for type PE34 Class C Product. It has outstanding properties of a high hoop stress and a high level of environmental

stress crack resistance. These copolymers have NSF 14 and AWWA C901/C906 certification for potable water applications, comply with ANSI/NSF Standard 61 health effects requirement, and are recognized by the Plastics Pipe

Institute as having a pipe material designation code of PE3608, PE3408 and PE80.

TYPICAL PROPERTIES1 English Values SI Vaues ASTM Method

D 3350345464C345464CCell Classification

D 16032.3%2.3%Carbon Black Concentration

F 1473>100 hrs>100 hrsNotch Tensile (PENT)

F 1248>5000 hrs>5000 hrsPipe ring ESCR6



ISO 90808.0 MPa-Minimum Required Strength

D 2837D 2837

11.0 MPa5.5 MPa

1600 psi800 psi

Hydrostatic Design Basis@ 23 *C@ 60 *C

D 746<-118 *C<-180 *FBrittleness Temperature

D 1525126 *C259 *FVicat Softening Point

D 22406868Hardness (Shore D)

D 2560.32 kj/m6 ft-lbf/inNotched Izod Impact Strength

D 790827 MPa120,000 pisFlexural Modulus3

D 638>600%>600%Elongation @ Break (2 in/min)

D 638D 638

22.8 MPa31.0 MPa

3300 psi4500 psi

Tensile Strength@ Yield (2 in/min)@ Break (2 in/min)

D 123812.5 g/cc-Melt Index2

D 48830.955 g/cc-Density (Black)

1Typical properties will vary within specification limits2190 degrees C/21,100g32% Secant-Method 1

4Condition B, 10%5Condition C6Two inch, SIDR 19

13

800-327-4735


ASTM D – 3035POLYETHYLENE PLASTIC PIPE (SDR-PR)

Based on Controlled Outside Diameter Water PipePE3608 (PE3408) NSF 14/ AWWA C901 APPROVED

•SDR 17 100PSI SPEC I (IPS)

24,500’0.43#2.095"0.140”2.375”S11652”

36,000’0.27#1.676"0.112”1.900”S11551 ½”

78,000’0.21#1.464"0.098”1.660”S11451 ¼”

117,000’0.13#1.161"0.077”1.315”S11351”

130,000’0.09#0.926"0.062”1.050”S11253/4”

Max. ft.Truckload

WeightPer ft

Minimum I.D.

WallThickness

NominalO. D.

Part NumberSIZES

•SDR 13.5 125PSI SPEC I (IPS)

24,500’0.53#2.023"0.176”2.375”S13652”

36,000’0.34#1.618"0.141”1.900”S13551 ½”

78,000’0.26#1.414"0.123”1.660”S13451 ¼”

117,000’0.17#1.121"0.097”1.315”S13351”

130,000’0.10#0.894"0.078”1.050”S13253/4”

Max. ft.Truckload

WeightPer ft

Minimum I.D.

WallThickness

NominalO. D.

Part NumberSIZES

O.D. controlled water/fluids pipe. Recommended for industrial and government applications. Easily connects by fusing, eliminating the need for common connections

14

800-327-4735


24,500’0.64#1.943"0.216”2.375”S16652”

36,000’0.41#1.554"0.173”1.900”S16551 ½”

78,000’0.31#1.358"0.151”1.660”S16451 ¼”

117,000’0.20#1.075"0.120”1.315”S16351”

130,000’0.13#0.860"0.095”1.050”S16253/4”

Max. ft.Truckload

WeightPer ft

Minimum I.D.

WallThickness

NominalO. D.

Part Number

SIZES

24,500’0.76#1.847"0.264”2.375”S20652”

36,000’0.49#1.478"0.211”1.900”S20551 ½”

78,000’0.37#1.292"0.184”1.660”S20451 ¼”

117,000’0.23#1.023"0.146”1.315”S20351”

130,000’0.15#0.816"0.117”1.050”S20253/4”

Max. ft.Truckload

WeightPer ft

Minimum I.D.

WallThickness

NominalO. D.

Part Number

SIZES

ASTM D – 3035 POLYETHYLENE PLASTIC PIPE (SDR-PR)

Based on Controlled Outside Diameter Water PipePE3608 (PE3408) NSF 14/ AWWA C901 APPROVED




15

800-327-4735


I.P.S. (Iron Pipe Size) PE3608 (PE3408) ASTM F-714

Meets AWWA C906/NSF 14 Standard

2,080'2,100'

40' / 160'50' / 200'21.97#1.417"9.91"12.750"12"

1,680’1,750

40’ / 120’50’ / 150’26.49#1.556”10.70”14.00”14”

2,880'2,900'

40' / 160'50' / 200'15.62#1.194"8.36"10.750"10"

4,480'4,600'

40' / 560'50' / 700'10.05#.958"6.70"8.625"8"

7,280'7,800'

40' / 520'50' / 650'5.93#.736”5.15"6.625"6”

16,240'15,950'

40' / 1160'50' / 1450'2.75#.500”3.50"4.500"4”

24,320'26,600'

40' / 1520'50' / 1900'1.66#.389”2.72"3.500"3"

MAX FTPER

TRUCK

LENGTH/ FT PERPALLET

NOMINALWEIGHTPER FT

MIN. WALLTHICKNESS

NOMINALI.D.

NOMINALO.D.PIPE

SIZE

SDR 9 IPS (200psi)

16


800-327-4735




2,080'2,400'

40' / 160'50' / 200'18.41#1.159"10.29"12.750"12"

1,680’2,100’

40’ / 120’50’ / 150’22.20#1.273”11.30”14.00”14”

2,880'3,400'

40' / 160'50' / 200'13.09#.977"8.67"10.750"10"

4,480'5,250'

40' / 560'50' / 700'8.43#.784"6.96"8.625"8"

7,280'9,100'

40' / 520'50' / 650'4.97#.602”5.34"6.625"6”

16,240'20,300'

40' / 1160'50' / 1450'2.29#.409”3.63"4.500"4”

24,320'30,400'

40' / 1520'50' / 1900'1.39#.318”2.82"3.500"3"

MAX FTPER

TRUCK


NOMINALWEIGHTPER FT

MIN. WALLTHICKNESS

NOMINALI.D.

NOMINALO.D.PIPE

SIZE

SDR 11 IPS (160psi)

17


800-327-4735




SDR 13.5 IPS (130psi)

2,240'2,800'

40' / 160'50' / 200'15.30#.944"10.74"12.750"12"

1,680’2,100’

40’ / 120’50’ / 150’18.45#1.037”11.80”14.00”14”

2,880'3,600'

40' / 160'50' / 200'10.88#.796"9.06"10.750"10"

4,480'5,600'

40' / 560'50' / 700'7.00#.639"7.27"8.625"8"

7,280'9,100'

40' / 520'50' / 650'4.13#.491”5.58"6.625"6”

16,240'20,300'

40' / 1160'50' / 1450'1.91#.333”3.79"4.500"4”

24,320'30,400'

40' / 1520'50' / 1900'1.15#.259”2.95"3.500"3"

MAX FTPER

TRUCK


NOMINALWEIGHTPER FT

MIN. WALLTHICKNESS

NOMINALI.D.

NOMINALO.D.PIPE

SIZE

18


800-327-4735




SDR 17 IPS (100psi)

2,240'2,800'

40' / 160'50' / 200'12.36#.750"11.16"12.750"12"

1,680’2,100’

40’ / 120’50’ / 150’14.90#.824”12.25”14.00”14”

2,880'3,600'

40' / 160'50' / 200'8.79#.632"9.40"10.750"10"

4,480'5,600'

40' / 560'50' / 700'5.66#.507"7.54"8.625"8"

7,280'9,100'

40' / 520'50' / 650'3.34#.390”5.79"6.625"6”

16,240'20,300'

40' / 1160'50' / 1450'1.54#.265”3.93"4.500"4”

24,320'30,400'

40' / 1520'50' / 1900'0.93#.206”3.06"3.500"3"

MAX FTPER

TRUCK


NOMINALWEIGHTPER FT

MIN. WALLTHICKNESS

NOMINALI.D.

NOMINALO.D.PIPE

SIZE

19


800-327-4735




SDR 21 IPS (80psi)

2,240'2,800'

40' / 160'50' / 200'10.13#.607"11.46"12.750"12"

1,680’2,100’

40’ / 120’50’ / 150’12.22#.667”12.58”14.00”14”

2,880'3,600'

40' / 160'50' / 200'9.66#.512"9.66"10.750"10"

4,480'5,600'

40' / 560'50' / 700'4.64#.411"7.75"8.625"8"

7,280'9,100'

40' / 520'50' / 650'2.74#.315”5.95"6.625"6”

16,240'20,300'

40' / 1160'50' / 1450'1.26#.214”4.04"4.500"4”

24,320'30,400'

40' / 1520'50' / 1900'0.76#.167”3.14"3.500"3"

MAX FTPER

TRUCK


NOMINALWEIGHTPER FT

MIN. WALLTHICKNESS

NOMINALI.D.

NOMINALO.D.PIPE

SIZE

20


800-327-4735




SDR 26 IPS (64psi)

2,240'2,800'

40' / 160'50' / 200'8.27#.490"11.77"12.750"12"

1,680’2,100’

40’ / 120’50’ / 150’9.97#.539”12.92”14.00”14”

2,880'3,600'

40' / 160'50' / 200'5.88#.413"9.92"10.750"10"

4,480'5,600'

40' / 560'50' / 700'3.78#.332"7.96"8.625"8"

7,280'9,100'

40' / 520'50' / 650'2.23#.255”6.11"6.625"6”

16,240'20,300'

40' / 1160'50' / 1450'1.03#.173”4.15"4.500"4”

24,320'30,400'

40' / 1520'50' / 1900'0.62#.135”3.23"3.500"3"

MAX FTPER

TRUCK


NOMINALWEIGHTPER FT

MIN. WALLTHICKNESS

NOMINALI.D.

NOMINALO.D.PIPE

SIZE

21


800-327-4735




SDR 32.5 IPS (50psi)

2,240'2,800'

40' / 160'50' / 200'6.67#.392"11.96"12.750"12"

1,680’2,100’

40’ / 120’50’ / 150’8.04#.431”13.13”14.00”14”

2,880'3,600'

40' / 160'50' / 200'4.74#.331"10.08"10.750"10"

4,480'5,600'

40' / 560'50' / 700'3.05#.265"8.09"8.625"8"

7,280'9,100'

40' / 520'50' / 650'1.80#.204”6.21"6.625"6”

16,240'20,300'

40' / 1160'50' / 1450'.83#.139”4.22"4.500"4”

MAX FTPER

TRUCK


NOMINALWEIGHTPER FT

MIN. WALLTHICKNESS

NOMINALI.D.

NOMINALO.D.PIPE

SIZE

22


800-327-4735


D.I.P.S. (Ductile Iron Pipe Size) PE3608 (PE3408) ASTM F-714


SDR 9 DIPS (200psi)

1,920'2,000'

40' / 160'50' / 200'23.55#1.467"10.09"13.200"12"

1,440’1,500’

40’ / 120’50’ / 150’31.64#1.700”11.69”15.300”14”

2,720'2,800'

40' / 160'50' / 200'16.65#1.233"8.48"11.100"10"

3,920'4,200'

40' / 560'50' / 700'11.07#1.006”6.91"9.050"8"

7,280'7,300'

40' / 520'50' / 650'6.43#.767”5.27"6.900"6”

13,920'14,500'

40' / 1160'50' / 1450'3.11#.533”3.66"4.800"4”

MAX FTPER

TRUCK


NOMINALWEIGHTPER FT

MIN. WALLTHICKNESS

AVERAGEI.D.

NOMINALO.D.PIPE

SIZE

23


800-327-4735




SDR 11 DIPS (160psi)

2,240'2,300'

40' / 160'50' / 200'19.73#1.200"10.65"13.200"12"

1,680’1,700’

40’ / 120’50’ / 150’26.51#1.391”12.35”15.300”14”

2,880'3,200'

40' / 160'50' / 200'13.95#1.009"8.96"11.100"10"

4,480'4,900'

40' / 560'50' / 700'9.28#.823”7.30"9.050"8"

7,280'8,450'

40' / 520'50' / 650'5.39#.627”5.57"6.900"6”

16,240'17,400'

40' / 1160'50' / 1450'2.61#.436”3.87"4.800"4”

MAX FTPER

TRUCK


NOMINALWEIGHTPER FT

MIN. WALLTHICKNESS

AVERAGEI.D.

NOMINALO.D.PIPE

SIZE

24


800-327-4735




SDR 17 DIPS (100psi)

1,960'2,100'

40' / 160'50' / 200'13.25#.776"11.55"13.200"12"

1,440’1,800’

40’ / 120’50’ / 150’17.80#.900”13.39”15.300”14”

2,880'3,150'

40' / 160'50' / 200'9.37#.653"9.71"11.100"10"

4,480'5,600'

40' / 560'50' / 700'5.23#.532”7.92"9.050"8"

7,280'9,100'

40' / 520'50' / 650'3.62#.406”6.03"6.900"6”

14,560'15,600'

40' / 1040'50' / 1300'1.75#.282”4.20"4.800"4”

MAX FTPER

TRUCK


NOMINALWEIGHTPER FT

MIN. WALLTHICKNESS

AVERAGEI.D.

NOMINALO.D.PIPE

SIZE

25


800-327-4735


26

FLYING “W” PLASTICSPOLYETHYLENE WATER PIPE & TUBING

P.O. Box 759 Glenville, WV 26351304-462-5779 Fax 304-462-7657 Sales 800-327-4735

PRODUCTS:P.V.C. Sewer & Drain Pipe

Polyethylene Gas PipePolyethylene Water Pipe

Polyethylene Utility Pipe and Conduit

Documents

Polyethylene Water Tubing 2007 5