Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
1725-84246-001B
Polycom® RealPresence® MedialignTM 55 Express
SETUP SHEET
Polycom recommends installing acable tie through the power supplybracket to provide strain relief forcables routed through the lowercable access opening.
Attach the codec and powersupply cables. Refer to theWiring Diagram on Page 4.
Attach the power supply and adapter bracket.
Attach the codec and codec bracket.Remove the rear cover.1
b
2
c
3 4 5
a
CodecBracket Adapter
Bracket
CameraBracket
WallMountBrackets
Please read through this Display User Guide for safety precautions before installing this product
Display User Guide
RealPresence® Medialign™ Express
Connect the power cord and power up thesystem. Verify that the device boots up.
Cables not shownfor clarity.
Temporarily manage cables exitingthrough the lower cable access in therear cover by tying them to the displayhandles.
Attach the display adapter brackets to theback of the display.
Attach the cable to thecamera and attach thecamera to the camera bracket.
Attach the camera assemblyto the display.
Power down and unplug the devicefrom mains. Attach the rear cover.
6 7
9 10 11
8
Cameracable notshownfor clarity.
Attach the wall mount bracket to the wall. Attach the display by hooking thedisplay brackets onto the wall mountbracket on the wall.
Switch the system power ON.
Connect the power cable to thesystem.
Display not shownfor clarity.
13
www.polycom.com/videodocumentation
Support
Product DocumentationDocumentation du produitDocumentación del productoDocumentação do produtoProduktdokumentation
12 14
15 Configure the codec. Refer to thePolycom® RealPresence® GroupSeries Administrator Guide fordetails.
16
© 2016, Polycom, Inc. All rights reserved. POLYCOM® and the names and marks associated with Polycom's products are trademarks and/or servicemarks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries. All other trademarks areproperty of their respective owners.
Wiring Diagram
Codec located inside the displayassembly / housing.
LAN
Mini HDCI
HDCI
LAN
HDMI In
C13 cable inside thedisplay assembly / housing.
Power outlet located on the wallbehind the display
Customer providednetwork connection.
Through customer providedcable path to table.
Enet
12Vdc
Mains Power
CLink
Ethernet
Power
HDCI
Legend
HDMI
CLink