Polycom High Definition Telepresence: TPX HD 306M ... The TPX HD 306M ships standard with an applewood multipurpose conference table. It is the customers responsibility to supply chairs

Updated March 27, 2009

Technical Specifications

1

VIDEO & AUDIO TECHNOLOGY

Video and Audio Specifications

Video Standards Description

H.264 Video codec

H.239 People + Content

H.261 and H.263++ For compatibility with legacy video conferencing endpoints

LPR (Lost Packet Recovery) Video Error Concealment for resiliency against network issues

AES Media Encryption For secure video/audio and content

Audio Standards

Siren™ 22 22kHz bandwidth with StereoSurround™

G722.1 Annex C 14kHz bandwidth with Polycom Siren 14

G.722, G.722.1 7kHz bandwidth

G.711 3.4kHz bandwidth

Bandwidth Requirements: Bandwidth estimates are based on network traffic in one direction and include an additional 15% for overhead and management traffic.

Video Format Minimum Recommended

1080p/30fps 11 Mbps 21 Mbps

720p/60fps 7.5 Mbps 15 Mbps

720p/30fps 7.5 Mbps 15 Mbps

LAN Connection Requirements (default configuration): Ethernet 100 Base-T

Telepresence Solution LAN connections for

HDX’s

LAN connection for touch screen

control panel Total LAN connections

TPX HD 306M 3 1 4

One analog (POTS) line for voice add-on

Polycom® Telepresence Experience™

High Definition (TPX™ HD 306M)

Version 2.0

Technology Components:

• Three Polycom HDX video codecs supporting 1080p at 30fps or 720p at 60fps

• Three Polycom Digital Ceiling Microphone Arrays

• Polycom StereoSurround™ speaker kit

• Three high-definition 60-inch plasma displays

• Three high-definition video cameras

• Color touch panel user interface

• Three 15-inch high resolution content displays integrated in conference table

©2009 Polycom, Inc. All rights reserved. Polycom and the Polycom logo design are registered trademarks of Polycom, Inc. All other trademarks are the property of their respective owners. Information is subject to change without notice.

2

Room Environment

• Six seats on-camera in point-to-point calls

• Four seats on-camera in multipoint or calls with a traditional videoconferencing system

• Twelve seats for off-the-call use*

* The TPX HD 306M ships standard with an applewood multipurpose conference table. It is the customers responsibility to supply chairs or order optional black executive chairs offered by Polycom. See specs below.

Chair specifications: Chairs for the TPX HD solution may either be provided by the customer or purchased through Polycom. It is highly recommended for the best telepresence experience that the chairs be identical in all TPX rooms.

• Low-back

• Seat height and tilt adjustments

• Ergonomic features: tension adjustment, chair tilt lock, seat height, contoured cushions, center-tilt movement

• Leather cushioned

• Casters

• Arm span: 23 3/4” wide x 26 1/2” deep x 39” high

• Wheel base: 26” wide x 26 1/2” deep x 39” high For customers choosing to supply their own chairs, the dimensions must NOT exceed:

• Arm span: 24 1/2”

• Wheel base: 27”

.

Room Size & Floor Layout

Units Room Width Room Depth Ceiling Height (min)

Ft/in 18 ft 13 ft 8 ft Minimum Room Size

m 5.5 m 4.0 m 2.4 m

Ft/in 24 ft 15 ft 8ft 8 in Recommended room size

m 7.3 m 4.6 m 2.7 m


3

Power & Cooling

Standby

(Components off except rack

pwr and cameras)

In Use

(Max call rate with

Content and doc sharing)

Maximum

(system will not exceed)

Total Power

(Watts) 300 1400 2100

BTUs/Hour 1023 4777 7165

Cooling in Tons .09 .4 .6

Environmental Conditions

Conference room operating temperature 41-86° F, 5-30° C

Relative humidity 10% to 80% (non-condensing)

Sound Pressure Level NC18 to NC25, Maximum 40 dBA level

Total Installed Weight

TPX HD 306M Units Front Wall Credenza Area Avg. Static Load lb/ft2 - kg/m

2

lbs 1760 lbs 40 sq ft. 44 lb/ft Front Wall Credenza

kg 798.3 kg 3.716 sq m 214.8kg/m

lbs 695 lbs 60 sq ft. 12 lb/ft Multipurpose Conference Table

kg 315.3 sq m 5.6 sq m 58.6 kg/m

Regulatory Compliance

• CE Marking

• FCC Part 15 Class A


4

User Interface (touch panel specifications)

The color Touch Panel is the interface for RPX HD Suites. It enables you to place video and audio calls, hang up calls, control the audio and perform other telepresence conferencing tasks. The Touch Panel is placed within easy reach of the center seats at the main table. Below is a summary of the available tasks you may control via the color Touch Panel.

Button/Function Description

Make a video call The user has the ability to dial manually or speed dial. There are 18 speed dial buttons available

(9 buttons will appear on the home screen at a time.)

Previous Page/Next Page Buttons allow the user to view additional speed dial buttons

Make an audio call Use the audio call button to make an audio only call or to add in an audio participant during a

video call. There are 4 audio speed dial buttons available.

Hang Up Allows the user to end the call

Audio Control Allows the user to raise, lower or mute the audio

Audio Level Horizontal bar indicating current audio level

Content indicator Icon, when lit, indicates the far end is sharing content; also allows the user to start and stop

sharing content

Help Desk Button set up by the system administrator to place an audio call to assist users should they

experience technical difficulties or have a question.


5

POINT TO POINT CALL MODES (without an MCU)

If you make a call to… This is what you will see in your TPX HD 306M room…

This is what the far site will see…

TPX HD 306M

Two seats on each display.

Two seats on each display.



HDX Series (or other traditional videoconferencing endpoint)

The people at the far site on the center display. The left and right displays are blank.

The four center seats of the TPX HD 306M room on the People display.



RPX HD 200 Series

The entire RPX HD Suite. Two seats are shown on the left display and two seats are shown on the center display. The right display is blank.

The entire TPX HD 306M room. Three seats are shown on each display.



RPX HD 400 Series

The right six seats at the RPX HD main table. Two seats are shown on each display.

The entire TPX HD 306M room. Two seats are shown on the far right display, on the center right display, and on the center left

display. The far left display is blank.


6

MULTIPOINT CALL MODES In multipoint calls, the TPX HD 306M adjusts so that the full room is in view. What the far site sees varies depending on a number of factors. The following illustrations show what you might see.

If you make a multipoint call to…

This is what you will see…

Four other TPX HD 306M Solutions


This is what you will see…

Five other TPX HD 306M Solutions


This is what you will see in your TPX HD 306M room…

This is what the far site HDX Series (or other traditional conferencing endpoint will see…

Three TPX HD 306M Solutions and four HDX

Series or (other traditional

videoconferencing solutions)

Documents

Polycom High Definition Telepresence: TPX HD 306M ... The TPX HD 306M ships standard with an applewood multipurpose conference table. It is the customers responsibility to supply chairs