1
FIND YOUR MAST C-100+ C- 80+ C- 60 The best possible performance for your sail. Great pumping response, acceleration, light feel and absorp- tion of the hardest conditions. For optimal comfort and control 100% carbon content and produ- ced to the exact Point-7 standards for bend-curve and hardness. The high carbon content of the C-100 will guarantee the best possible performance from your sail. The C-100 offers the fastest reflex and responsiveness of any of our masts thus also improving the per- formance of your rig. SDM 430, 460, 490, 520, 550, 580 Super RDM 370, 400, 430 B.I.C.O. 430, 460, 490 The high carbon content and quali- ty of this mast will ensure durability and a good reflex that will lighten the feeling of any rig. The best com- promise between performance and durability. The C80+ mast range comprises a 80% carbon content and is produ- ced to the exact specifications of the Point-7 standards for bend- curve and hardness. SDM 400, 430, 460, 490, 520 RDM 370, 400, 430 A very price incentive mast that can be used with all our sails. The C60 offers good performance and en- joyment from any sail used with it A 60% carbon content and produced to the exact Point-7 standards for bend-curve and hardness. The C60 is made in Italy to guaran- tee optimal quality and performan- ce for its class. Using the same high carbon quality, as on the other more expensive masts, the respon- siveness is kept to a maximum. The C60 mast is available in both SDM and RDM SDM 430, 460, 490 RDM 370, 400, 430 ABOUT BICO Construction and performance of the BICO: A new choice to the classical RDM mast in the longer sizes. The bi-conical BICO line, convey extreme durability and stability to bigger rdm masts. Having 2 extra reinforced points where the diameter changes, will make the mast challenge shore breaks and big swell’s. The middle section being of a bigger diameter then a rdm mast, will give extra sta- bility as found in a SDM mast. Available in 3 sizes: 430 Bico: The middle section of the 430 BICO is bigger then a normal rdm mast, but still closer to a rdm then a SDM diameter. This could be the mast choice for heavier sailors who would want extra stability on the wave sails over 5.0 or freeride and slalom no cam sail. 460 and 490 Bico: The middle section is closer to a sdm diameter. Combining the strength of the RDM mast and the reflex of a SDM mast. To be used in Slalom No Cam and Free Ride sails . The top and bottom sec- tions of the mast are close to the RDM diameter allowing for a stronger construction, whilst having in the centre section a standard diameter which is allowing the sail to react faster and offer better stability. A optimal choice against normal rdm masts in these length. RDM Extension needed: By using a RDM extension also means having a stronger base because of the thicker wall thickness of the extension. Additionally the mast is very easy to insert in the sail because of the reduced diameter in the mast top. RDM Boom Adapter included. BASE Rdm diameter base: RDM extention needed. LOWER HALF The widening of the mast allows insertions of extra material in proportion to it’s diameter. This reinforces a typical weak mast point. MIDDLE This section has a slightly wider diameter then an rdm mast. This assures a total stability of the mast while riding waves and during hard lan- ding jumps. On freeride and slalom sails with no cams, it donates a direct acce- lerating and stability in stronger winds. More power in light wind against any rdm mast. DT+: The Direct Ferule system is integrated on the B.I.C.O. LOW TOP The wider section at this point, allows insertions of extra material in proportion to it’s diameter. This reinforces are solutions to shore breaks resistant, and big wipe outs TOP The rdm diameter allows an easier insertion of the mast in the sail.

Point-7 Mast Range

Embed Size (px)

DESCRIPTION

Point-7 Mast Range

Citation preview

Page 1: Point-7 Mast Range

FIND

YOUR

MAS

T C-100+ C- 80+ C- 60The best possible performance for your sail. Great pumping response, acceleration, light feel and absorp-tion of the hardest conditions.For optimal comfort and control 100% carbon content and produ-ced to the exact Point-7 standards for bend-curve and hardness. The high carbon content of the C-100 will guarantee the best possible performance from your sail.The C-100 o�ers the fastest re�ex and responsiveness of any of our masts thus also improving the per-formance of your rig.

SDM

430

, 460

, 490

, 520

, 550

, 580

Sup

er R

DM

370

, 400

, 430

B.I.

C.O

. 430

, 460

, 490

The high carbon content and quali-ty of this mast will ensure durability and a good re�ex that will lighten the feeling of any rig. The best com-promise between performance and durability. The C80+ mast range comprises a 80% carbon content and is produ-ced to the exact speci�cations of the Point-7 standards for bend-curve and hardness.

SDM

400

, 430

, 460

, 490

, 520

RD

M 3

70, 4

00, 4

30

A very price incentive mast that can be used with all our sails. The C60 o�ers good performance and en-joyment from any sail used with it A 60% carbon content and produced to the exact Point-7 standards for bend-curve and hardness.

The C60 is made in Italy to guaran-tee optimal quality and performan-ce for its class. Using the same high carbon quality, as on the other more expensive masts, the respon-siveness is kept to a maximum. The C60 mast is available in both SDM and RDM

SDM

430

, 460

, 490

RD

M 3

70, 4

00, 4

30

ABOUT BICOConstruction and performance of the BICO: A new choice to the classical RDM mast in the longer sizes. The bi-conical BICO line, convey extreme durability and stability to bigger rdm masts. Having 2 extra reinforced points where the diameter changes, will make the mast challenge shore breaks and big swell’s. The middle section being of a bigger diameter then a rdm mast, will give extra sta-bility as found in a SDM mast. Available in 3 sizes:

430 Bico: The middle section of the 430 BICO is bigger then a normal rdm mast, but still closer to a rdm then a SDM diameter. This could be the mast choice for heavier sailors who would want extra stability on the wave sails over 5.0 or freeride and slalom no cam sail.460 and 490 Bico: The middle section is closer to a sdm diameter. Combining the strength of the RDM mast and the re�ex of a SDM mast. To be used in Slalom No Cam and Free Ride sails . The top and bottom sec-tions of the mast are close to the RDM diameter allowing for a stronger construction, whilst having in the centre section a standard diameter which is allowing the sail to react faster and o�er better stability. A optimal choice against normal rdm masts in these length.

RDM Extension needed:By using a RDM extension also means having a stronger base because of the thicker wall thickness of the extension. Additionally the mast is very easy to insert in the sail because of the reduced diameter in the mast top.RDM Boom Adapter included.

BASERdm diameter base: RDM extention needed.

LOWER HALFThe widening of the mast allows insertions of extra material in proportion to it’s diameter. This reinforces a typical weak mast point.

MIDDLEThis section has a slightly wider diameter then an rdm mast.This assures a total stability of the mast while riding waves and during hard lan-ding jumps. On freeride and slalom sails with no cams, it donates a direct acce-lerating and stability in stronger winds. More power in light wind against any rdm mast. DT+: The Direct Ferule system is integrated on the B.I.C.O.

LOW TOPThe wider section at this point, allows insertions of extra material in proportion to it’s diameter. This reinforces are solutions to shore breaks resistant, and big wipe outs

TOPThe rdm diameter allows an easier insertion of the mast in the sail.