Upload
hector
View
39
Download
0
Embed Size (px)
DESCRIPTION
Pneumatic Road Tube Counters Version 3.0. (Press “Esc” to exit this presentation at anytime.). K-Hill Signal Company, Inc. Model KBA-II. K-Hill Signal Company, Inc. Model KBA-II, Time Saver. KBA-II — Key Features. 8-place alpha/numeric liquid crystal display (LCD) with backlight option; - PowerPoint PPT Presentation
Citation preview
Pneumatic Road Tube Counters
Version 3.0
K-Hill Signal Company, Inc.Model KBA-II
(Press “Esc” to exit this presentation at anytime.)
K-Hill Signal Company, Inc.Model KBA-II, Time Saver
KBA-II — Key Features 8-place alpha/numeric liquid crystal display (LCD) with backlight option;
Magnet zero reset;
Magnet interval length selection;
Selectable intervals: 1hr to 12 hrs., 1 day to 99 days, and continuous;
Magnet interval data read out;
Grand total and 24 recorded intervals;
5-year lithium batteries;
Simple to operate;
Waterproof / compact case;
1/4" (6 mm) thick walled aluminum case, with lock and chain.
KBA-II — OperationThe KBA-II Timesaver, traffic counter will count in intervals of days, or hours (in increments from 1 to 12 hours). You can log up to 24 intervals and the counter automatically stops after the last interval, for later viewing. Each logged interval will hold up to 9999 counts. The KBA II, can display the current total, each logged interval, and a real time update as vehicles pass over the road tube.
KBA-II — Operation
Toggle SideMenu Side
Display
Magnet
Note, disk magnets Note, disk magnets have been replaced have been replaced
with a wand.with a wand.
KBA-II — Operation
Ver 2.1KBA-II
No? / Yes?Turn Off
10 - 20 sec.?LCD View
Off? / Timed?Backlite
Always / IntervalCount
No? / Yes?Reset
*L:xxxxLog no00
Done / Interval / AlwaysC:000000
Each swipe will sequentially display the following screens:
Swipe the “M” (menu) sidewith magnet
KBA-II — Operation
Ver 2.1KBA-II
No? / Yes?Turn Off
10 - 20 sec.?LCD View
Off? / Timed?Backlite
1 hr, 2 hr . . . 99 daysInterval
Always / IntervalCount
No? / Yes?Reset
*L:xxxxLog no00
Done / Interval / AlwaysC:000000
Each swipe will sequentially display the following screens:
Swipe the “M” (menu) sidewith magnet
KBA-II — Operation
Ver 2.1KBA-II
No? / Yes?Turn off
10 - 20 Sec.?LCD View
Off? / Timed?Backlite
Always / IntervalCount
No? / Yes?Reset
L:xxxxLog no00
Done.C:0000
Each swipe will sequentially display the following screens:
Swipe the “T” (toggle) sidewith magnet to select options (shown here in blue).
Important Note
The counter is designed to tally one-half count for each axle on the vehicle. Example, a two axle truck towing a two axle trailer will show up as a double count.
Important Note-cont’d
The counter will automatically shut off after completing the 24 hours of counting.
KBA-II — Installation Instructions
Step 1. Clear road surface of sharp debris that may cut the rubber tube;
Step 2. Secure plugged end of the road tube to the road edge;
Step 3. Secure counter end of the road tube to the opposite road edge;
Step 4. Reset (or zero) the counter and make a note of the time (on the Traffic Counter Data Collection Sheet).
Recommended Tools: Hammer
KBA-II — Calibration & Initial Setup
Ver 2.1KBA-II
NoTurn Off
20 sec.LCD View
OffBacklite
1 hrInterval
IntervalCount:
YesReset:
*L:xxxxLog no00
Interval or DoneC:000000
As you swipe the Menu side, the following sequence of information will be displayed. . .
Hint: set this toHint: set this to 20 sec. It will allow 20 sec. It will allow more time to view more time to view the display when the display when
extracting and extracting and recording data.recording data.
KBA-II — Calibration & Initial Setup
Ver 2.1KBA-II
NoTurn Off
20 sec.LCD View
OffBacklite
1 hrInterval
IntervalCount:
YesReset:
*L:xxxxLog no00
Done or Interval or AlwaysC:000000
KBA-II — Calibration & Initial Setup
“Resetting the Counter”
Ver 2.1KBA-II
NoTurn Off
20 sec.LCD View
OffBacklite
1 hrInterval
IntervalCount:
YesReset:
*L:xxxxLog no00
DoneC:000000
This must be set to This must be set to “Yes” by swiping with “Yes” by swiping with the magnet on the “T” the magnet on the “T” side of the counter, side of the counter, after you have after you have installed the counter installed the counter at the sampling site. at the sampling site.
KBA-II — Calibration & Initial Setup
Display
Ver 2.1KBA-II
NoTurn Off
20 sec.LCD View
OffBacklite
1 hrInterval
IntervalCount:
YesReset:
*L:xxxxLog no00
DoneC:000000
Total Counts
“Log no00” corresponds to the first hour (or interval period) of counts, Log no01 corresponds to the second hour of counts, and so on.
Number of counts for the 1 hour interval (Log no00). This is the number you will be entering into the summary sheet
KBA-II — Recording Collected Data
Ver 2.1KBA-II
NoTurn Off
20 sec.LCD View
OffBacklite
1 hrInterval
IntervalCount:
YesReset:
*L:xxxxLog no00
DoneC:000000
The “Done” will be displayed when the 24 hours of counts are completed.
Display
KBA-II — Recording Collected Data
Display
Ver 2.1KBA-II
NoTurn Off
20 sec.LCD View
OffBacklite
1 hrInterval
IntervalCount:
YesReset:
*L:xxxxLog no00
DoneC:000000
To advance the display of each “Log noXX”, you must swipe the “T” (toggle) side of the counter unit.
KBA-II — Recording Collected Data
Traffic Counter Data Collection Sheet Sampling Location or Site Name: _______________ Counter brand and serial number or property number: ________________ Interval Setting: 1 hour Name of Data Collector: _________________ Date: _________________ Place a check in this column to denote time counter w as started
Time
Log noXX
Recorded Counts
12:00 a.m. (midnight) 12:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00 4:30 5:00 5:30 6:00 6:30 7:00 7:30 8:00 8:30 9:00 9:30 10:00 10:30 11:00 11:30 12:00 p.m. (noon) 12:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00 4:30 5:00 5:30 6:00 6:30 7:00 7:30 8:00 8:30 9:00 9:30 10:00 10:30 11:00 11:30
Use this column, (rounded off to closest half hour) to indicate the time you started the counter. This will determine what row (on this form) to record your counts for each Log noXX.
Suggestions for using a form to record data:
KBA-II — Recording Collected Data
Traffic Counter Data Collection Sheet Sampling Location or Site Name: _______________ Counter brand and serial number or property number: ________________ Interval Setting: 1 hour Name of Data Collector: _________________ Date: _________________ Place a check in this column to denote time counter w as started
Time
Log noXX
Recorded Counts
12:00 a.m. (midnight) 12:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00 4:30 5:00 5:30 6:00 6:30 7:00 7:30 8:00 8:30 9:00 9:30 10:00 10:30 11:00 11:30 12:00 p.m. (noon) 12:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00 4:30 5:00 5:30 6:00 6:30 7:00 7:30 8:00 8:30 9:00 9:30 10:00 10:30 11:00 11:30
Use this column to keep track of the intervalLog no00, Log no01,…Log noXX.
Use this column to record counts for each interval, *L:xxxx.
KBA-II — Product Service Information
K-Hill Signal Company, Inc.
326 West Third Street
Uhrichsville, OH 44683-2036
Contact: Bill Hall
Phone: 800-730-0872 or 740-922-0421
Fax: 740-922-0421
Website: www.khilltrafficounters.com
e-mail: [email protected]
End of Demonstration
Return Home