PMI UF/MF Modules and Systems for Laboratories About PMI PHILOSEP PMI System is designed to execute various experiments of MF/UF membranes and modules in laboratories. PHILOSEP PMI System is made for separation, concentration, and refining with Inside-out compress filtration. Operation methods will be optimized and specially designed depending on customers needs and processes. Furthermore, PHILOS provides PMI (PHILOS Membrane Index) so that customers can adopt it to the PMI System. PMI possesses various pore sizes from UF to MF and it is standardized product that has reasonable price. Advantages of PMI Operates various Hollow Fiber membrane modules Operates both continuous and non-continuous process Applies various filtration methods Minimized loss of materials (minimized hold-up) User-friendly and convenient washing PMI System Flow diagram Specification of PMI System Reservoir Volume500 mL Max. Operating Pressure3 bar / 600 mmHg Operating Temp range5 ~ 50 Peristaltic pump -Drive power 220v -Head(Max.) 2L/min Diaphragm pump-Drive power 220v -Max. flow rate 1L/min High Density, High turbidity Raw Matters Feed Pump Suction Pump UF Feed Pump Screen Matters in Feed Screen Bacteria Store in Room temperature PMI Specification Membrane Module ITEM103 series207 Series Length (mm) Diameter (mm)2554 NoItem Membrane Material MWCO (Pore size) Module type Membrane Area 103 Series207 Series 1ESUF-5K PES 5,000 Inside- out 0.8 2ESUF-10K10,000 3ESUF-30K30,000 4ESUF-100K100,000 5ESUF-150K150,000 Outside -in 0.08 1.0 6 RCM 0.4 PVDF 0.4 0.8 7 RCM 2 22 8 RCM 8 88