PLUMBING FITTINGS - rmc.com.au · 1. Replace any pr oduct found by Reliance Worldwide Corporation (Aust.) Pty. Ltd. to be defective within twelve months of sale or Replace any pr

PLUMBING FITTINGS TRADE PRICE LIST 2019

Page 2 All prices exclude GSTPage 2 All prices exclude GST

Head office and National Distribution Centre.

Address: 27-28 Chapman Place, Eagle Farm, QLD, Australia 4009

Phone: 1800 810 803

Fax: 1800 062 669

Web: www.SharkBite.com.au

Contact Information

SharkBite® Plumbing Solutions and Ryemetal® are divisions of Reliance Worldwide Corporation (Aust) Pty. Ltd. ABN 71 004 784 301

Plumbing Fittings Trade Price List

Page 3All prices exclude GST

No party should rely upon the contents of this publication as to the fitness of any particular product for any particular use or application. Goods are offered with the benefit of the manufacturers warranty but Reliance Worldwide Corporation (Aust.) Pty. Ltd. shall not be liable for any loss or damage either direct or consequential arising out of any defects.

Subject to any statutory obligation, Reliance Worldwide Corporation (Aust.) Pty. Ltd. may at its election:

1. Replace any product found by Reliance Worldwide Corporation (Aust.) Pty. Ltd. to be defective within twelve months of sale or supply equivalent product;

2. Pay the cost of replacing any such defective product; or

3. Repair any such defective product or pay the cost of repairs.

All goods are sold on Reliance Worldwide Corporation (Aust.) Pty. Ltd. General Conditions of Sale as attached and as may be modified from time to time prior to any particular sale.

Reliance Worldwide Corporation (Aust.) Pty. Ltd. reserves the right to change pricing, modify designs and specifications and to withdraw and introduce products.

© 2019 All rights reserved.

No part of this publication may be reproduced, copied or transmitted in any form by any means graphic, electronic or mechanical (including photo-copying, recording, taping or by any information storage and retrieval system) without prior permission in writing of the publisher Reliance Worldwide Corporation (Aust.) Pty. Ltd.

Freight Policy

Terms and Conditions

For information regarding freight pricing please contact our customer service team.

Plumbing Fittings Trade Price List

Page 4 All prices exclude GST

SharkBite PEX Plumbing System

Index

Product Page

F1 Straight Coupling 8

F1 Reducing Coupling 8

F1 Conversion Couplings PEX - Cu / PB / PN20 PEX 8

F2 Straight Connector 8

F3 Straight Connector 9

F12 Elbow 9

F12 Conversion Elbow 9

F12 Elbow 9

F14 Elbow 9

F15BP Elbow 10

F19BP Elbow 10

Top-Plated Male Elbow 10

Recycled Water Lugged Elbow 10

F24 Tee 10

F24 Conversion Tee PEX - Cu / PB / PN20 PEX 11

F25 Unequal Tee 11

F26 Unequal Tee 11

F27 Unequal Tee 11

F61 Stop End 12

F62 Straight Tap Connector 12

F63 Bent Tap Connector 12

Copper / PEX Braising Tail 12

Capillary / PEX Braising Tail 12

PEX Flare Compression Adaptor 13

Flare Compression / PEX Tail Adaptor 13

Tube End / PEX Tail Adaptor 13

Recess Assembly - Lugged 13

Shower Assembly - Lugged (Without Riser) 14

Shower / Bath Combination - Lugged 14

DR Ball Valve PEX Connections 14

DR Ball Valve PEX Connections / Female 14

Insulated Tempering Valves 14

Manifolds 15

Tube Cutter 16

Disassembly Clip 16

PEX Disassembly Tongs 16

Depth Gauge / Deburring Tool 16

Tube Clip 16

Tube Bend Support 17

PEX Tube - Potable Water (Mustard) 17

PEX Tube - Hot Water (Red) 17

PEX Tube - Recycled Water (Lilac) 17

PEX Tube - Rainwater (Green) 17

PEX Tube - Pre-fitted with Conduit For In Slab Installation 18

Bare Conduit for UV Protection 18

PEX Tube - Tube Chasing Sleeve 18

Pre-Insulated PEX Tube 18

O2 Barrier PEX For Hydronics 18

100m Coils Mustard Pipe 19

Pipe De-Coiler 19

SharkBite Starter Packs 19


SharkBite Pushfit Copper Fittings

Yorkway Capillary - Copper

Ryemetal Yorkway Capillary - Brass

Index

Product Page

No. 1 Straight Couplings 20

No. 1R Reducing Couplings 20

Slip Couplings 20

No. 2 Straight Connectors 20

No. 3 Straight Connectors 20

No. 12 Elbow 21

No. 15BP Elbows 21

No. 19BP Elbows 21

Hot Water Elbow 21

No. 24 Tees 21

No. 25 Unequal Tee 22

No. 27 Unequal Tee 22

No. 61 Stop Ends 22

Flare Compression Adaptor 22

Copper Reducing Tail 22

DR Ball Valves Copper Connections 23

DR Ball Valves Copper Connection / Female 23

Insulated Tempering Valves 23

Disconnection Tongs 23

Disconnection Clips 23

Product Page

W1 Straight Couplings 24

W1 Straight Slip Couplings 24

W1R Reducing Couplings 24

W6 Reducing Pieces 24

W12 Elbows 24

W12 Reducing Elbows 24

W24 Tees 25

W25 Tees OD All Ends 25



Product Page

W1R Reducing Couplings 26

W2 Straight Connectors 26

W3 Straight Connectors 26

W5 Winged Connectors Ext. MI 27

W13 Elbows 27

W14 Elbows 27

W15BP Elbows 28

W19BP Elbows 28

W19WS Right Angle Wall Spud 28

W29 Tees FI One End 28

W30 Tees FI Centre 28

W62 Straight Tap Connectors 29

W63 Bent Tap Connectors 29

W64 Bent Union Connectors 29

Tube Bushes DR Brass - Female 29


Ryemetal Yorktite Nylon Olive Compression

Ryemetal Yorkflare Flared Compression

Product Page

Union Male / Copper (03) 32

Union Female / Copper (02) 32

Union Copper / Copper (01) 32

Elbow Copper / Copper (012) 32

Elbow Male / Copper (013) 32

Elbow Female / Copper (014) 32

Elbow Female / Copper Lugged (015BP) 33

Elbow Male / Copper Nippled Lugged (019BP) 33

Tee Triple Union (024) 33

Tee Triple Union Reducing (025) 33

Tee Double Union (030) 33

Nuts 33

Nylon Olives 34

Kinco Nut & Olive Sets 34

Product Page

Union Male / Copper (Z3) 35

Union Female / Copper (Z2) 35

Union Copper / Copper (Z1) 36

Elbow Copper / Copper (Z12) 36

Elbow Male / Copper (Z13) 36

Elbow Female / Copper Lugged (Z15BP) 37

Elbow Male / Copper Nippled Lugged (Z19BP) 37

Tee Triple Union (Z24) 37

Tee Double Union (Z30) 37

Compression Nuts 38

Compression Cones 38

Caps (Compression) 38

Ryemetal Yorktite Copper Olive Compression

Product Page

Union Male / Copper (03) 30

Union Female / Copper (02) 30

Union Copper / Copper (01) 30

Elbow Male / Copper (013) 30

Elbow Female / Copper (014) 30

Elbow Copper / Copper (012) 30

Elbow Male / Copper Nippled Lugged (019BP) 31

Tee Triple Union (024) 31

Copper Olives 31

Index


Miscellaneous

Screwed Brassware

Product Page

Bush 42

Bush Male Tube 42

Bush Female Tube 42

Hex Caps 42

Elbow Female / Female 43

Elbow Male / Female 43

Extension Male / Female 43

Locknut 43

Nipple All Thread 44

Hex Nipple 44

Hex Nipple Reducing 44

Plug Hex Head 44

Socket Hex 45

Socket Hex Reducing 45

Adaptor M / F 45

Adaptor M / F Reducing 45

Tee Female 45

Barrel Union Male / Male 46

Barrel Union Male / Female 46

Product Page

Copper Saddles 47

Tools 47

Gas Meter Fittings - Nut & Tail 47

Meter Adaptor 47

Hose Clamps - Mild Steel 48

Hope Clamps - Stainless Steel 48

Ryemetal Yorkseal Brass Cone Compression

Product Page

Union Male / Copper (K3) 39

Union Female / Copper (K2) 39

Union Copper / Copper (K1) 39

Union Copper / Copper (K1R) 39

Elbow Copper / Copper Reducing (K12) 39

Elbow Male / Copper (K13) 40

Elbow Female / Copper (K14) 40

Elbow Female / Copper Lugged (K15BP) 40

Tee Triple Union (K24) 41

Tee Double Union (K30) 41

Stop End 41

"Yorkseal" Olives 41

Index



Order Code Description Pack Size List Price

F008 16mm OD Both Ends10 5.63

100 5.35

F016 20mm OD Both Ends10 7.25

100 6.89

F020 25mm Both Ends (Suits PEX or Copper)1 13.66

50 12.98


F058 20mm OD x 16mm OD10 6.66

100 6.33

F06025mm x 20mm OD PEX(Suits PEX or Copper)

1 13.73

50 13.04


F009 16mm OD x DN15 Cu10 5.95

100 5.65

F017 20mm OD x DN20 Cu10 7.70

100 7.32

F009PX 16mm PN16 x 16mm PN20 Coupling10 7.14

100 6.78

F017PX 20mm PN16 x 20mm PN20 Coupling10 9.24

100 8.78

F009PB16mm PN16 x 16mm Polybutylene Coupling

10 7.14

100 6.78

F017PB20mm PN16 x 22mm Polybutylene Coupling

10 9.24

100 8.78

F009AP16mm SharkBite to 16mm Auspex

Coupling (16mm OX x 16mm PN16)

10 7.14

100 6.78

F017AP20mm SharkBite to 20mm Auspex Coupling

(20mm OD x 20mm PN16)

10 9.24

100 8.78

F1 Straight Coupling

F1 Reducing Coupling

F2 Straight Connector

F1 Conversion Couplings PEX - Cu / PB / PN20 PEX

F008

F058

F009

F072


F072 16mm OD x 15mm Fl 10 5.00

100 4.75

F068 16mm OD x 20mm Fl5 8.02

100 7.62

F088 20mm OD x 20mm Fl5 6.87

100 6.53

F094 25mm x 25mm Fl (Suits PEX or Copper)1 12.70

50 12.07


F120

F3 Straight Connector

F12 Conversion Elbow

F14 Elbow

F12 Elbow

F12 Elbow



F120 16mm OD x 15mm Ml10 4.41

100 4.19

F116 16mm OD x 20mm Ml5 8.02

80 7.62

F138 20mm OD x 15mm Ml5 7.29

100 6.93

F134 20mm OD x 20mm Ml5 6.88

100 6.54

F14225mm x 20mm Ml

(Suits PEX or Copper)

1 10.18

50 9.67

F14025mm x 25mm Ml


1 12.70

50 12.07


F250 16mm PEX x 15mm Copper Elbow10 6.94

50 6.59

F258 20mm PEX x 20mm Copper Elbow5 9.27

50 8.81


F308 16mm OD x 15mm Fl5 7.26

100 6.90


F248 16mm OD10 6.31

100 5.99

F256 20mm OD10 8.43

80 8.01

F26025mm OD


1 15.97

30 15.17


F280 16mm OD x 15mm Ml 5 6.26

100 5.95

F248

F250

F280

F308



F15BP Elbow

Top-Plated Male Elbow

F24 Tee


F334 16mm OD x 15mm Fl5 8.08

80 7.68

F340 20mm OD x 20mm Fl5 13.50

50 12.83

F19BP Elbow

Recycled Water Lugged Elbow


F350 16mm OD x 15mm Ml x 75mm10 5.75

70 5.46

F351 16mm OD x 15mm Ml x 185mm5 16.46

35 15.64

F352 16mm OD x 15mm Ml x 100mm5 9.33

60 8.86

F354 20mm OD x 20mm Ml x 200mm5 27.34

20 25.97

F356 20mm OD x 15mm Ml x 100mm 5 11.90

F358 20mm OD x 15mm Ml x 200mm 5 21.11


F336 16mm OD x 15mm Ml x 100mm5 13.50

30 12.83

F336-230 B / P Elbow 16mm OD x 15mm MI x 230mm 5 22.63


F339-90 20mm SB x 5/8” BSP x 90mm 5 21.00

F339-200 20mm SB x 5/8” BSP x 200mm 5 25.50


F362 16mm OD x 16mm OD x 16mm OD10 8.43

70 8.01


50 10.45

F37425mm x 25mm x 25mm(Suits PEX or Copper)

1 20.40

30 19.38

F334

F350

F336

F339-90

F362



F25 Unequal Tee

F27 Unequal Tee

F26 Unequal Tee


F363 16mm OD x 16mm OD x DN15 Cu5 10.83

50 10.29

F364 DN15 Cu x DN 15mm Cu x 16mm OD5 10.83

50 10.29

F371 20mm OD x 20mm OD x DN20 Cu5 13.95

50 13.25

F372 DN20 Cu x DN 20mm Cu x 20mm OD 5 13.95

50 13.25

F364PX16mm PN20 x 16mm PN20 x

16mm SharkBite Tee

10 13.00

100 12.35

F372PX20mm PN20 x 20mm PN20 x

20mm SharkBite Tee

10 16.74

100 15.90

F364PB18mm Poly / But x 18mm Poly / But x

16mm SharkBite Tee

10 13.00

100 12.35

F372PB22mm Poly / But x 22mm Poly / But x

20mm SharkBite Tee

10 16.74

100 15.90

F24 Conversion Tee PEX - Cu / PB / PN20PEX



50 9.53

F41625mm x 25mm x 20mm OD 1 17.92

25mm Suits PEX or Copper 30 17.02

F417 25mm x 25mm x DN20 1 21.97



70 8.85



50 10.82

F363

F412

F444

F454


F61 Stop End

F63 Bent Tap Connector

Capillary / PEX Braising Tail


F514 16mm OD10 6.53

100 6.20

F518 20mm OD5 7.18

100 6.82

F520 25mm (Suits PEX or Copper)1 10.17

60 9.66

F62 Straight Tap Connector

Copper / PEX Braising Tail


F526 16mm OD x 15mm Nut10 10.59

80 10.06

F530 20mm OD x 20mm Nut5 14.73

80 13.99


F532 16mm OD x 15mm Nut10 13.88

80 13.19

F536 20mm OD x 20mm Nut5 18.35

70 17.43


F600 DN15 CU x 16mm OD Tail10 4.37

140 4.15


150 5.52


100 5.52


100 5.99


F608 DN15 CAP x 16mm OD Tail5 5.45

150 5.18

F609 DN20 CAP x 20mm OD Tail5 5.45

200 5.18


F514

F526

F532

F600

F608


Flare Compression / PEX Tail Adaptor

Recess Assembly - Lugged

PEX Flare Compression Adaptor

Tube End / PEX Tail Adaptor



F610 16mm OD x 15mm Flare10 8.47

100 8.05

F612 20mm OD x 20mm Flare5 12.18

100 11.57


F614 15mm Flare x 16mm OD Tail5 9.08

100 8.63

F616 20mm Flare x 16mm OD Tail5 9.15

100 8.69


F720 16mm OD x 20mm OD Tail5 8.27

100 7.86


50 9.01


50 9.20


F630 300mm Right Angled1 32.94

20 31.29


30 31.29

F640 300mm Straight1 35.96

20 34.16

F642 200mm Straight1 35.96

20 34.16

F630

F610

F614

F720

F640


Shower / Bath Combination - Lugged

DR Ball Valve PEX Connection / Female



20 50.47

DR Ball Valve PEX Connections

Insulated Tempering Valves


BVF670 16mm OD x 16mm OD1 13.63

36 12.95

BVF672 20mm OD x 20mm OD1 21.20

24 20.14

BVF67425mm x 25mm


1 34.84

12 33.10


BVF680 16mm OD x 15 Fl1 11.29

36 10.73

BVF682 20mm OD x 20 Fl1 18.99

24 18.04

BVF68425mm x 25 Fl


1 32.70

12 31.07

Order Code Description List Price

MIXF11009I Tempering Valve 16mm Insulated 182.93

MIXF11012I Tempering Valve 20mm Insulated 207.60

MIXF11116I SharkBite Ultra Solar 16mm Insulated 275.53

MIXF11117I SharkBite Ultra Solar DN20 Insulated 299.60


BVF670

F650

F662

BVF680

MIXF11009I

Shower Assembly - Lugged (Without Riser)



30 34.02


30 34.02

F655 200mm Right Angled Inverted1 35.81

30 34.02

F657 150mm Right Angled Inverted1 35.81

30 34.02


Manifolds


F690-3T 20mm PEX x 3 Way 16mm Take Offs x 20mm PEX 29.96

F690-4T20mm PEX x 4 Way 16mm Take Offs x 20mm PEX

Suits 20mm PEX Fitting36.94


F690-3T

F690-4T


Disassembly Clip

Depth Gauge / Deburring Tool

Tube Cutter

PEX Disassembly Tongs

Tube Clip


F700 PE-X Tube Cutter 16mm to 25mm (Ratchet style) 70.31

F701 PE-X Tube Cutter 16mm to 25mm (Non-Ratchet style) 12.96


F711 16mm Tongs 25.57

F713 20mm Tongs 25.57

F715 25mm Tongs 25.57

RA711 DN15 Cu Tongs 25.57





RA710 DN15 Disassembly Clip Cu Only 10 1.05

F710 16mm Disassembly Slip PEX Only 5 1.05

F712 20mm Disassembly Clip PEX and Cu 5 1.05


F702 DN15 Cu to DN25 Cu 10.80


F820 16mm Timber 100 0.27

F830 20mm Timber 100 0.34

F850 25mm Timber 50 0.36

F822 16mm Masonry Nail 100 0.27



F824 16mm Tek Screw 100 0.29

F834 20mm Tek Screw 100 0.34

F854 25mm Tek Screw 50 0.39

F826 16mm Masonry Conrete Anchor 50 0.35

F836 20mm Masonry Concrete Anchor 50 0.38

F828 16mm Metal Stud 50 0.32

F838 20mm Metal Stud 50 0.36

F700

F701

RA710

F711 + F713

F702

F820


Tube Bend Support

PEX Tube - Hot Water (Red)

PEX Tube - Rainwater (Green)


F840 16mm Bend Support 10 2.43




F860R 16mm x 5m Straight Length 10 12.15

F864R 16mm x 50m Coil 1 121.5


F874R 20mm x 50m Coil 1 175.00


F882R 25mm x 25m Coil 1 142.50


F860G 16mm x 5m Straight Length 10 12.15

F862G 16mm x 25m Coil 1 60.75


F872G 20mm x 25m Coil 1 87.50


F882G 25mm x 25m Coil 1 142.50

PEX Tube - Potable Water (Mustard)

PEX Tube - Recycled Water (Lilac)


F860 16mm x 5m Straight Length 10 12.15

F864 16mm x 50m Coil 1 121.50


F874 20mm x 50m Coil 1 175.00


F882 25mm x 25m Coil 1 142.50


F862L 16mm x 25m Coil 1 60.75

F872L 20mm x 25m Coil 1 87.50

F874L 20mm x 50m Coil 1 175.00

F882L 25mm x 25m Coil 1 142.50


F840

Potable Water

Hot Water

Recycled Water

Rain Water


Bare Conduit for UV Protection

O2 Barrier PEX For Hydronics

Pre-Insulated PEX Tube


F706 23mm ID x 25m Coil - Suits 16mm & 20mm PEX 41.50

F707 29mm ID x 25m Coil - Suits 25mm PEX 52.00


F866H 16mm EVOH PEX x 100m (Oxygen Barrier) 317.00




F862RR3 25m x 16mm Pre-Insulated PEX R0.3 Coil 121.25






PEX Tube - Pre-fitted with Conduit For In-Slab Installation

PEX Tube - Tube Chasing Sleeve


F863 16mm x 25m Coil 118.97

F873 20mm x 25m Coil 146.76


F704 16mm and 20mm 200m Coil 60.30

F708 Silicon Tape Underground Wrap 32.00


Pre-Fitted with Conduit

F706

F704

Pre-Insulated

O2 Barrier


100m Coils Mustard Pipe

SharkBite Starter Packs


F864100 16mm x 100m Coil (Mustard only) 2.43 / m

F874100 20mm x 100m Coil (Mustard only) 3.50 / m


F4001 Starter Kit - No Fittings 234.08

Pipe De-Coiler


UFH034 Pipe De-Coiler 500.00

Order Code Description F2001 F3001 F4001

RA711 Disconnection Tongs DN15 Cu Only 1 1 1

F711 Disconnection Tongs 16mm PE-X Only 1 1 1

RA713 Disconnection Tongs DN20 Cu Only 1 1 1

F713 Disconnection Tongs 20mm PE-X Only 1 1 1

RA710 Disconnection Clip DN15 Cu Only 2 2 2

F710 Disconnection Clip 16mm PE-X Only 2 2 2

F712 Disconnection Clip 20mm PE-X and DN20 Cu 2 2 2

F701 Tube Cutter 1 1 1

F702 Copper Depth Gauge and Deburrer 1 1 1

Hard Case Exacta-Pak & Fittings Instructions 1 1 1


SharkBite Starter Pack Contents

Recessed Assemblies, Clips & Tube Purchased Separately.

F713

Coiled Mustard

UFH034

F710 F711

F702

F701

F712


No.1R Reducing Couplings

No.2 Straight Connectors

No.1 Straight Couplings

Slip Couplings

No.3 Straight Connectors

SharkBite Push-To-Connect Copper Fittings


RA008 DN15 Coupling10 7.03

250 6.68

RA016 DN20 Coupling10 9.06

140 8.61

F020 25mm Coupling (Suits PEX or Copper)1 13.66

50 12.98


RA058DN20 x DN15 Coupling-Reducing

(Suits PEX or Copper)10 8.33

140 7.91

F06125mm x DN20 Coupling-Reducing


1 13.83

50 13.14


RA3008 Slip Coupling DN155 15.11

50 14.35

RA3016 Slip Coupling DN205 18.82

40 17.88

RA3020Slip Coupling DN25

Not to be used for PEX

1 29.95

20 28.45


RA072 DN15 x 15mm Fl Connector Straight F10 6.26

200 5.95

RA088 DN20 x 20mm Fl Connector Straight F5 8.60

100 8.17

F09425mm x 25mm Fl Connector Straight F


1 12.70

50 12.07


RA120 DN15 x 15mm Ml Connector Straight M10 5.80

200 5.51

RA134 DN20 x 20mm Ml Connector Straight M10 8.61

100 8.18

F140DN25 x 25mm Ml Connector Straight M


1 12.70

60 12.07

F14225mm x 20mm Ml Connector Straight M

25mm (Suits PEX or Copper)

1 10.18

60 9.67

RA008

RA058

RA3008

RA072

RA120


No.12 Elbow

No. 19BP Elbows

No. 24 Tees


RA248 DN15 Elbow10 7.89

150 7.50

RA256 DN20 Elbow10 9.90

80 9.41

F260 DN25 Elbow (Suits PEX or Copper)1 15.97

30 15.17

No. 15BP Elbows

Hot Water Elbow


RA334 DN15 x 15mm Fl Elbow Lugged5 10.11

100 9.60

RA340 DN20 x 20mm Fl Elbow Lugged5 14.31

50 13.59


RA380 DN15 x 20mm Ml10 7.95

80 7.55


RA350 DN15 x 15mm MIX75 Elbow Lugged10 7.24

100 6.88


35 20.57


60 10.89


RA362 DN15mm Tee10 10.55

100 10.02

RA370 DN20mm Tee10 13.51

60 12.83

F37425mm Tee


1 20.40

30 19.38


RA248

RA334

RA350

RA380

RA362


No. 27 Unequal Tee

Flare Compression Adaptor

No. 61 Stop Ends

Copper Reducing Tail


RA454DN20mm x DN15mm x DN15mm

Tee Reducing

10 12.26

100 11.65


RA514 DN15mm Cap10 8.18

300 7.77

RA518 DN20mm Cap5 8.99

150 8.54

F520 25mm Cap (Suits PEX or Copper)1 10.17

60 9.66


RA610 DN15mm x 15mm Flare Str Connector5 10.59

100 10.06

RA612 DN20mm x 20mm Flare Str Connector5 15.23

100 14.47


RA720 DN15mm x DN20mm Tail Reducer5 9.72

200 9.23

RA722 DN15mm x DN25mm Tail Reducer1 11.13

60 10.57

RA724DN20mm x 25mm Tail Reducer


1 11.88

60 11.29


RA514

RA610

RA610

No. 25 Unequal Tee


RA412DN20mm x DN20mm x DN15mm Tee

Reducing

10 13.20

80 12.54

F417DN25mm x DN25mm x DN20mm Tee

Reducing (Suits PEX or Copper)

1 21.97

30 20.87


DR Ball Valves Copper Connections

Insulated Tempering Valves

Disconnection Clips


BVRA670 Ball Valve DN15mm x DN15mm1 13.63

36 12.95

BVRA672 Ball Valve DN20mm x DN20m1 21.40

24 20.33

BVF674Ball Valve 25mm x 25m 1 34.84

25mm Suits PEX or Copper 12 33.10

DR Ball Valves Copper Connection / Female

Disconnection Tongs


BVRA680 Ball Valve DN15 x 1/2" FI BSP1 13.14

36 12.48

BVRA682 Ball Valve DN20 x 3/4" FI BSP1 21.16

24 20.10

BVF684Ball Valve 25mm x 1" FI BSP 1 32.70

Suits PEX or Copper 12 31.07


MIXRA11009I SharkBite CU Tempering DN15, Insulated 182.93

MIXRA11116I SharkBite Ultra Solar DN15, Insulated 275.53


RA711 DN15 Tongs 25.57

RA713 DN20 Tongs 25.57

RA715 DN25 25.57


RA710 DN15 Demount Clip (Packed) 10 1.05

F712 DN20 Demount Clip (Packed) 10 1.05


BVRA670

BVRA680

MIXRA11009I

RA711

RA710


W1 Straight Slip Couplings

W6 Reducing Pieces

W12 Reducing Elbows

W1 Straight Couplings

W1R Reducing Couplings

W12 Elbows



W008 15mm OD Both Ends Cu 10 0.46




W058 20mm OD x 15 OD Cu 10 1.05

W060 25mm OD x 20 OD Cu 5 2.04










W176 20mm PE x 18mm OD Cu 10 1.79


W274 20mm OD x 15 OD Cu 10 1.87

W008

W032

W058

W176

W248

W274

Copper Capillary Fittings (Long Engagement for Soft Solder or Brazing). Made to Australian Standard AS 3688 1990.


W24 Tees

W26 Tees OD All Ends


W362 15mm OD All Ends Cu 10 1.15




W444 20mm x 15mm x 20mm Cu 10 2.83





W404 18mm x 18mm x 15mm Cu 10 1.85

W412 20mm x 20mm x 15mm Cu 10 2.30

W416 25mm x 25mm x 20mm Cu 5 5.61

W420 25mm x 25mm x 15mm Cu 5 5.12


W454 20mm x 15mm x 15mm Cu 10 2.42

W362

W404

W444

W454



W2 Straight Connectors


W072 15mm OD x 15mm Fl DR 10 1.56

W088 20mm OD x 20mm Fl DR 10 4.04

W096 25mm OD x 20mm FL DR 5 11.52


W1R Reducing Couplings

W3 Straight Connectors


W055 18mm OD x 15mm OD DR 10 4.72


W116 15mm OD x 20mm Ml DR 10 4.97

W120 15mm OD x 15mm Ml DR 10 1.06

W122 15mm OD x 10mm Ml DR 5 2.85

W134 20mm OD x 20mm Ml DR 10 1.42

W138 20mm OD x 15mm Ml DR 10 1.56

W140 25mm OD x 25mm Ml DR 5 2.99

W072

W116

W055



W5 Winged Connectors Ext. MI


W170 15mm OD x 15mm Ml DR 10 3.56


W13 Elbows


W280 15mm OD x 15mm Ml DR 10 3.41

W286 20mm OD x 20mm Ml DR 5 3.01

W14 Elbows


W308 15mm OD x 15mm Fl DR 10 3.54

W314 20mm OD x 20mm Fl DR 10 4.12

W320 25mm OD x 20mm Fl DR 1 25.24

W170

W280

W308


W15BP Elbows


W334 15mm OD x 15mm Fl DR 10 2.87

W340 20mm OD x 20mm Fl DR 10 3.51

W342 20mm OD x 15mm Fl DR 10 3.88


W334

W350

W19WS Right Angle Wall Spud

W30 Tees FI Centre

W30BP Tees FI Centre


W356 15mm OD x 15mm Ml DR 10 3.31


W482 15mm x 15mm x 15mm Fl DR 10 3.90

W486 20mm x 20mm x 20mm Fl DR 10 8.64

W488 20mm x 20mm x 15mm Fl DR 10 23.69


W500 15mm x 15mm x 15mm FI DR 10 9.58

W506 20mm x 20mm x 15mm FI DR 5 31.42

W19BP Elbows

W29 Tees FI One End


W350 15mm OD x 15mm Ml DR 10 2.75

W354 20mm OD x 15mm Ml DR 10 7.55


W474 20mm x 20mm Fl x 20mm DR 10 24.72

W474

W482

W30BP

W356


W62 Straight Tap Connectors


W526 15mm OD x 15mm Nut DR 10 3.87


W63 Bent Tap Connectors


W532 15mm OD x 15mm Nut DR 10 4.31

W536 20mm OD x 20mm Nut DR 10 7.63

W64 Bent Union Connectors

Tube Bushes DR Brass - Female


W540 20mm OD x 25mm Nut DR 5 23.56

W542 25mm OD x 32mm Nut DR 5 52.27


W702 20mm 10 5.06

W532

W526

W540

W700


Union Female / Copper (02)

Elbow Male / Copper (013)

Elbow Copper / Copper (012)


4920 15mm Fl x 15mm C DR 10 4.64

4921 20mm Fl x 15mm C DR 5 5.36


4940 15mm Ml x 15mm C DR 10 4.64

4941 20mm Ml x 15mm C DR 5 4.94

4942 20mm Ml x 20mm C DR 5 7.21


4960 15mm C Both Ends DR 10 4.12



Union Male / Copper (03)

Union Copper / Copper (01)

Elbow Female / Copper (014)


4910 15mm Ml x 15mm C DR 10 3.09

4913 20mm Ml x 20mm C DR 5 5.67




4950 15mm FL x 15mm C DR 10 4.33

4910

4920

4930

4940

4950

4960



Tee Triple Union (024)


4980 15mm C All Ends DR 5 7.00


Elbow Male / Copper Nippled Lugged (019BP)

Copper Olives


4971 15mm Ml (50mm length) x 15mm C DR 5 5.67


4992 15mm CU 20 0.93

4993 20mm CU 20 1.08

4971

4980

4992



Union Male / Copper (03)

Union Copper / Copper (01)

Elbow Male / Copper (013)


10000 15mm M x 15mm C DR 10 3.27

10003 20mm M x 20mm C DR 5 3.71


10020R 15mm C Both Ends DR 10 3.91

10020.2 15mm C Both Ends DR 10 7.21


10030R 15mm M x 15mm C DR 10 4.89

10032 20mm M x 15mm C DR 5 4.27

10033 20mm M x 20mm C DR 5 5.41

Union Female / Copper (02)

Elbow Copper / Copper (012)

Elbow Female / Copper (014)


10009 15mm F x 10mm C DR 10 8.28

10010R 15mm F x 15mm C DR 10 3.09

10012 20mm F x 15mm C DR 5 4.12


10050R 15mm C Both Ends DR 10 4.07

10050.2 15mm C Both Ends CP 1 10.99

10051.2 20mm C Both Ends CP 5 10.30


10040R 15mm F x 15mm C DR 10 4.12

10040.2 15mm F x 15mm C CP 5 9.27

10000

10009

10020R

10050R

10030R

10040R


Elbow Female / Copper Lugged (015BP)

Tee Triple Union (024)

Tee Double Union (030)


10060R 15mm F x 15mm C DR 5 4.33

10060.2 15mm F x 15mm C CP 5 7.21

10062 20mm F x 20mm C DR 5 5.67


10070R 15mm C All Ends DR 5 5.41

10070.2 15mm C All Ends CP 5 9.27

10071 20mm C All Ends DR 5 8.50

10071.2 20mm C All Ends CP 5 12.36


10080R 15mm C x 15mm C x 15mm F DR 5 6.59

Elbow Male / Copper Nippled Lugged (019BP)

Tee Triple Union Reducing (025)

Nuts


10063 15mm M (50mm length) x 15mm C DR 5 5.41


10074.2 20mm C x 20mm C x 15mm C CP 10 20.86


10090R 15mm DR 10 1.13

10090.2 15mm CP 10 1.85

10091 20mm DR 10 2.06

10091.2 20mm CP 10 4.79


10060R

10063

10070R

10074

10080R

10090R


Nylon Olives


10092 15mm 100 0.12

10093 20mm 20 0.16

Kinco Nut & Olive Sets


10095 15mm DR 10 0.97

10095.2 15mm CP 10 1.12

10096 20mm DR 10 1.68


10092

10095


Union Male / Copper (Z3)


0001 4mm M x 6mm C 1 6.18

0005 6 mm M x 6mm C DR 10 5.92

0007 6mm M x 10mm C 1 6.80

0009 10mm M x 6mm C 1 5.92

0011 10mm M x 10mm C DR 10 4.69

0012 10mm M x 15mm C DR 10 4.84

0013 10mm M x 20mm C 1 8.93

0017 15mm M x 10mm C 10 4.30

0018 15mm M x 15mm C DR 10 2.06

0019 15mm M x 20mm C DR 10 4.64

0020 15mm M x 25mm C 1 12.54

0022 20mm M x 15mm C DR 10 3.30

0023 20mm M x 20mm C DR 10 3.09

0027 25mm M x 15mm C 1 11.33

0028 25mm M x 20mm C DR 5 11.85

0029 25mm M x 25mm C DR 5 6.80

0035 32mm M x 32mm C DR 1 11.85

0041 40mm M x 40mm C DR 1 15.45


Union Female / Copper (Z2)


0103 6mm F x 6mm C 1 7.98

0105 6mm F x 10mm C 1 7.73

0106 6mm F x 15mm C 1 7.73

0109 10mm F x 10mm C 1 6.26

0110 10mm F x 15mm C 1 6.36

0113 15mm F x 10mm C 1 7.39

0114 15mm F x 15mm C DR 10 2.83

0115 15mm F x 20mm C DR 10 4.94

0118 20mm F x 15mm C DR 10 3.86

0119 20mm F x 20mm C DR 10 4.12

0120 20mm F x 25mm C 1 11.76

0122 25mm F x 20mm C 1 11.33

0123 25mm F x 25mm C DR 5 9.79

0018

0114


Union Copper / Copper (Z1)

Elbow Copper / Copper (Z12)




0207 32mm C Both Ends 1 20.17

0208 40mm C Both Ends 1 30.64





Elbow Male / Copper (Z13)


0413 15mm M x 15mm C DR 10 3.19

0414 15mm M x 20mm C 1 8.67

0415 20mm M x 15mm C DR 10 3.91

0416 20mm M x 20mm C DR 10 4.79

0417 20mm M x 25mm C 1 23.18

0418 25mm M x 20mm C 1 19.83

0419 25mm M x 25mm C 1 20.52

0603

0413

0204


Elbow Female / Copper Lugged (Z15BP)

Tee Tripple Union (Z24)

Tee Double Union (Z30)


0800 15mm F x 15mm C DR 10 4.27

0800.2 15mm F x 15mm C CP 5 5.41

0801 15mm F x 20mm C 1 14.68

0802 20mm F x 20mm C 1 20.52


1002 10mm C All Ends 1 13.91

1003 15mm C All Ends DR 10 5.15

1004 20mm C All Ends DR 10 7.98

1005 25mm C All Ends 1 30.72


1600 15mm C x 15mm C x 15mm F 5 6.18

1605 20mm C x 20mm C x 20mm F 1 21.97

1607 15mm F x 15mm C x 15mm C 1 18.80

Elbow Male / Copper Nippled Lugged (Z19BP)


0900 15mm M (50mm length) x 15mm C DR 10 4.64


1002

0800

0900

1600


Compression Cones


1804 15mm C DR 10 1.44

1805 20mm C DR 10 1.65

Compression Nuts

Caps (Compression)


1702 10mm C 1 2.49

1703 15mm C DR 10 1.29

1704 20mm C DR 10 2.06


2203 15mm DR 1 1.72

2204 20mm DR 1 2.14


2203

1804

1702



Union Male / Copper (K3)

Union Copper / Copper (K1)


5100 15mm M x 15mm C DR 10 2.68

5102 20mm M x 15mm C DR 5 4.43

5103 20mm M x 20mm C DR 5 4.12

5104 25mm M x 25mm C 5 7.90

5105 15mm M x 25mm C 5 7.85




5302 25mm C Both Ends 5 12.02

Union Female / Copper (K2)

Union Copper / Copper (K1R)

Elbow Copper / Copper Reducing (K12)


5200 15mm F x 15mm C DR 10 4.53

5202 20mm F x 15mm C 5 4.36

5203 20mm F x 20mm C DR 10 4.33

5204 25mm F x 25mm C 5 8.58


5310 25mm C x 15mm C 5 9.51




5200

5100

5300

5400

5700



Elbow Male / Copper (K13)

Elbow Female / Copper Lugged (K15BP)

Elbow Female / Copper (K14)


5500 15mm M x 15mm C DR 5 4.22

5502 20mm M x 15mm C DR 5 5.15

5503 20mm M x 20mm C 5 7.81


5900 15mm F x 15mm C DR 5 5.15


5600 15mm F x 15mm C DR 10 4.12

5600.2 15mm F x 15mm C CP 1 10.30

5602 20mm F x 15mm C 5 7.64

5603 20mm F x 20mm C DR 5 5.77

5500

5600

5900


Tee Triple Union (K24)

Stop End



6101 20mm C All Ends DR 5 12.15

6102-AU 25mm C All Ends 5 27.04


5450 25mm C 5 9.79

Tee Double Union (K30)

"Yorkseal" Olives


6300 15mm C x 15mm C x 15mm F DR 5 8.14

6301 20mm C x 20mm C x 20mm F 5 16.05


6410 15mm Brass 20 1.18

6411 20mm Brass 20 1.44

6412 25mm Brass 50 2.66


6300

6100

5450

6410


Bush

Bush Female Tube


1900 6mm M x 4mm F 1 1.29

1902 10mm M x 6mm F 1 1.88

1903 15mm M x 4mm F 1 3.09

1904 15mm M x 6mm F 10 1.78

1905 15mm M x 10mm F DR 10 2.16

1907 20mm M x 6mm F 10 2.83

1908 20mm M x 10mm F 10 3.17

1909 20mm M x 15mm F DR 5 2.06

1913 25mm M x 15mm F DR 5 4.64

1914 25mm M x 20mm F DR 5 3.40

1921 40mm M x 32mm F DR 5 7.21

1924 50mm M x 25mm F DR 1 26.78


2101 20mm F x 20mm C 10 3.61

Bush Male Tube

Hex Caps


2001 10mm M x 10mm C 1 2.91

2002 10mm M x 15mm C 1 5.58

2004 15mm M x 15mm C 10 1.87

2006 15mm M x 20mm C 1 4.20

2009 20mm M x 20mm C 10 2.85

2010 20mm M x 25mm C 1 5.41

2013 25mm M x 25mm C 5 3.01

2016 32mm M x 32mm C 5 4.30

Screwed Brassware


2212 15mm DR 10 1.34

2213 20mm DR 10 2.27

1909

2001

2101

2212


Elbow Female / Female

Extension Male / Female


2400 4mm DR 1 4.64

2401 6mm DR 1 5.41

2402 10mm DR 1 5.92

2403 15mm DR 10 2.78

2404 20mm DR 5 3.91

2405 25mm DR 5 14.42

2407 40mm DR 1 30.90


2700 15mm M x 40mm F DR 5 2.37

Elbow Male / Female

Locknut


2500 4mm DR 1 3.61

2501 6mm DR 1 5.36

2502 10mm DR 10 4.64

2503 15mm DR 10 3.09

2504 20mm DR 5 4.64

2505 25mm DR 1 20.60


2803 15mm DR 10 1.03

2804 20mm DR 5 1.75

2805 25mm DR 1 3.30

Screwed Brassware

2503

2403

2700

2803


Nipple All Thread

Hex Nipple Reducing


3003 15mm x 150mm Length DR 8.24

3006 20mm x 150mm Length DR 12.88

3007 20mm x 300mm Length DR 25.75

3008 25mm x 150mm Length DR 20.60

Hex Nipple

Plug Hex Head


3200 4mm 1 1.21

3201 6mm 10 1.55

3202 10mm 10 1.55

3203 15mm DR 10 1.34

3203.2 15mm CP 10 1.75

3204 20mm DR 5 2.01

3205 25mm DR 1 6.08

3206 32mm DR 1 8.24

3207 40mm DR 1 13.39

3208 50mm DR 1 18.54


3400 4mm 1 1.11

3401 6mm 1 1.29

3402 10mm 1 1.55

3403 15mm DR 10 1.24

3404 20mm DR 5 1.75

3405 25mm DR 1 5.15


3300 6mm x 4mm 1 1.72

3302 10mm x 6mm 1 1.88

3304 15mm x 6mm 1 3.17

3305 15mm x 10mm 1 2.42

3306 20mm x 6mm 1 5.07

3307 20mm x 10mm 1 4.12

3308 20mm x 15mm DR 5 1.85

3308WM 20mm x 15mm W/M for washing machine hoses 1 7.64

3310 25mm x 20mm DR 1 3.66

3313 32mm x 25mm DR 5 10.30

Screwed Brassware

3403

3203

3003

3308


Socket Hex

Adaptor M / F

Tee Female


3800 4mm DR 1 2.58

3801 6mm DR 1 2.06

3802 10mm DR 1 3.04

3803 15mm F x 28mm Length DR 10 2.06

3809 20mm DR 5 3.61

3811 25mm DR 1 5.46


4002 15mm M x 15mm F DR 10 2.06

4003 20mm M x 20mm F DR 5 3.09

4004 25mm M x 25mm F DR 1 6.18


4200 4mm DR 1 4.12

4201 6mm DR 1 6.18

4202 10mm DR 1 5.15

4203-AU 15mm DR 10 4.12

4204-AU 20mm DR 1 5.97

4205-AU 25mm DR 1 15.45


4105-AU 15mm M x 20mm F DR 5 2.83

4107 20mm M x 25mm F DR 5 6.18

Socket Hex Reducing

Adaptor M / F Reducing


3903 15mm F x 6mm F 3.78

3905 20mm F x 15mm F DR 6.18

3907 25mm F x 20mm F DR 6.39

Screwed Brassware

3803

3905

4002

4105

4203-AU


Barrel Union Male / Female


4503 15mm DR 10 10.99

4504 20mm DR 10 19.06


4601 15mm 1 7.73

4602 20mm 1 11.15

4603 25mm 1 18.88

4604 32mm DR 1 24.90

4605 40mm DR 1 39.48

4606 50mm DR 1 50.65

Barrel Union Male / Male

Screwed Brassware

4602

4505


Miscellaneous

Order Code Description Pack Size List Price (Each)

N502 8mm OD 8mm 100 0.31

N503 9mm OD 9mm 100 0.36

N504 10mm OD 10mm 100 0.40

N505 15mm OD 15mm 100 0.37

N506 18mm OD 18mm 100 0.45

N507 20mm ID 20mm 100 0.50

N508 25mm OD 25mm 100 1.07

Order Code Description List Price (Each)

M301 24301 Flaring Tool 15-20mm 168.20


G9042 25mm 7.03

G9043 20mm 6.26

Copper Saddles

Tools

Meter Adaptor

Gas Meter Fittings - Nut & Tail


G9041 20mm 8.67

N505

G9041

M301

G9041


Order Code Size Clamping Range Pack Size Carton Size List Price

N002 OOO 9.5-12mm 10 100 0.93

N003 MOO 11-16mm 10 100 0.93

N004 OO 13-20mm 10 100 0.96

N006 O 16-22mm 10 100 1.13

N007 OX 18-25mm 10 100 1.13

N008 1A 22-30mm 10 100 1.21

N009 1 25-35mm 10 100 1.27

N010 1X 30-40mm 10 100 1.31

N011 2A 35-50mm 10 100 1.44

N012 2 40-55mm 10 100 1.47

N013 2X 45-60mm 10 100 1.55

N014 3 55-70mm 10 50 1.61

N015 3X 60-80mm 10 50 1.82

N016 4 70-90mm 1 50 1.93

N018 5 90-120mm 1 25 2.34

N019 6 120-140mm 1 25 2.54

N021 7 135-165mm 1 10 2.75

Order Code Size Clamping Range Pack Size Carton Size List Price

N202 OOO 9.5-12mm 10 100 3.12

N203 MOO 11-16mm 10 100 3.15

N204 OO 13-20mm 10 100 3.15

N206 O 16-22mm 10 100 3.84

N207 OX 18-25mm 10 100 3.93

N208 1A 22-30mm 10 100 4.24

N209 1 25-35mm 10 100 4.37

N210 1X 30-40mm 10 100 4.46

N211 2A 35-50mm 10 100 5.03

N212 2 40-55mm 10 100 5.24

N213 2X 45-60mm 10 100 5.49

N214 3 55-70mm 10 100 5.84

N215 3X 60-80mm 10 100 6.24

N216 4 70-90mm 10 100 6.49

N218 5 90-120mm 10 100 7.49

N219 6 120-140mm 10 100 8.18

N221 7 135-165mm 10 100 8.99

Hose Clamps - Mild Steel

Hose Clamps - Stainless Steel

Worm Drive, Hex Head Slotted Screws, Zinc Plated.

N208

N008

Miscellaneous


Notes

27-28 Chapman Place, Eagle Farm QLD 4009, Australia

Plumbing Fittings Trade Price List - 2019

SharkBite® and Ryemetal® are divisions of Reliance Worldwide Corporation (Aust) Pty. Ltd. ABN 71 004 784 301

1800 810 803 1800 062 669 www.rmc.com.au [email protected]

Documents

PLUMBING FITTINGS - rmc.com.au · 1. Replace any pr oduct found by Reliance Worldwide Corporation (Aust.) Pty. Ltd. to be defective within twelve months of sale or Replace any pr