Jonnesway has 30 years experience in the field of hand tools and air tools. All products meet strict quality requirements with many holding international design patents.

Represented in over 100 countries including the USA, Russia, New Zealand and now Australia, Jonnesway products have been tested in trade environments all over the world.

JWAG010141 INTERCHANGEABLE BUMPING TOOLS

JWAG010142 AUTO BODY & FENDER BUMPING HAMMER

JWAG010143 ALL GO CHISEL & PUNCH

- 11 interchangeable CR-V bits - For auto body repair and sheet metal work.- New Patented design with double locking device to secure extensions firmly and safely- Light weight

- 9 interchangeable CR-V bits - Specifically designed for auto body repair

- 14 interchangeable CR-V chisels and punches

Spec

ialty

Pan

el T

ools

JWAI030007

5PCS UPHOLSTERY AND TRIM JWAB030079 TOOLS- Includes

- “V” Double step door panel tool- “U” Blade door panel tool- “U” Blade mini-trim 10-IN-1 TRIM TOOLJWAB030022 panel tool

1. Molding remover semi - “V” Blade mini-trim door sharp beveled edge panel tool. 2. Windscreen wiper wrench3. Door rubber metal clip inserter4. Door weather strip clip remover5. Door trim bezel clip remover6. Door handle clip remover7. Headlight spring tool 8. Windscreen molding clip remover 9. Door rubber plastic clip remover10. Serrated edge for panel seam clean up

MULTI-DOLLY SMALL (37mm)JWAG010140MULTI-DOLLY LARGE (42mm)JWAG010140A

5PCS SCRAPER AND REMOVER SET

5 scrapers and picks to assist in a variety of applications.

JWAB030021 LONG-REACH SCRAPER- 305mm Long- Can store blades in handle- Uses regular #9 single-edge blades

JWP37M11A/ JWP37M18A JWP54M10A JWP38M11A JWP7802 JWP7803JWP7801

CLAMPS AND GRIPS

PLIERS

JWP0118 JWP0518JWP079 JWP0918 JWP1016 JWP1017 JWP1026 JWP1118 JWP1218

JWP6118 JWP7601 JWP7603 JWP2810 JWAI040018 JWAG010005 JWAG010011

2

Pliers and Grips

1

Plie

rs a

nd S

ocke

ts

3

JWAB0300602PCS CLIP REMOVAL PLIERS SET

- Removes trim pads and insulation, - Prevents fixing clips from breaking, - Assists with removing difficult clips by providing greater leverage.

JWAG010150SP SNAP RING PLIER SET

- For external or internal snap rings, - Kit comes complete with 10 tools.

JWP018SP3 PCS PROFESSIONAL PLIER SET

- 3 PCS Plier Set to fit in Tool Trolley,- High quality, professional plier set with comfort anti slip grips, - Set includes 8” Side Cutting Pliers, 8” Diagonal Pliers, and 8” Long Nose Pliers.

JWS06H232S 32PCS STAR SOCKET & BIT SET

JWS06H414S14PCS 1/4”& 3/8”& 1/2”DR STAR SOCKET SET W/METAL CLIP RAIL

JWS04H3125S 25 PCS 3/8” DR. 6PT FLANK SOCKET SET

JWS68H2141S 41PCS 1/4”DR. SUPER TECH SOCKET SET

JWS68H3126SP 26PCS 3/8”DR. SUPER TECH SOCKET SET

Sockets and Accessories

4

SUPER TECH SERIES SOCKETS

-Fits Metric 6pt, Metric 12pt, SAE 6pt, SAE 12pt, E-TORX, Spline, Square, Square & 50% rounded.- The point of contact is on the flats of the nut or bolt instead of the points which distributes power evenly without damaging the nuts or bolts.- Made from Chrome Vanadium, Molybdenum and Tungsten which extends life 10 times DIN standard,- Torque exceeds double DIN standard

Sock

ets a

nd A

cces

sorie

s

JWS15G2 1/4” DR. UNI-GRIP U-JOINT

- Dual internal spring ensures u-joint maintains semi-rigid while inserting into place. - The raised ridges provide a greater grip and prevents the u-joint from rolling.

UNI-GRIP U-JOINT

JWS15G3 3/8" DR. UNI-GRIP U-JOINT

JWS15G4 1/2" DR. UNI-GRIP U-JOINT

JWS60E303S 3/8” DR. QUICK RELEASE EXTENSION BAR

JWS60E403S 1/2” DR. QUICK RELEASE EXTENSION BAR

Quick release extension bar fitted with locking mechanism to prevent sockets from dislodging

5

JWRD02040S 40PCS 1/4" DR. MINI RATCHETYou may find this quickly becomes your “go to” set for a wide range of jobs.

JWC-DMH314 MAGNETIC SOCKET CLIP 3/8” Drive

JWC-DMH414 MAGNETIC SOCKET CLIP 1/2” DriveHelp to keep your sockets organised and easily accessible at the same time. Fitted with 14 magnetic metal socket clips.

JWS42M303S 3PC 3/8”DR. MAGNETIC EXTNESION BAR

JWS42M403S 3PC 1/2”DR. MAGNETIC EXTNESION BAR

Magnetic extension bar to retain the removed bolt.

Keys and Drivers

6

JWH06SA109S9 PC ANTI SLIP EXTRA LONG ARM (MM)

JWH06SA209S9 PC ANTI SLIP EXTRA LONG ARM (SAE)

- Metric set includes - 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm- SAE set includes - 1/6”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”

JWH10MT08SP8PCS TWO WAY STAR & TAMPER PROOF KEY SET

- 8 PCS Two Way star and tamper proof key set for tool trolley, - Comfort grip, T handle, - Comes with T10x100, T15x100, T20x100, T25x100, T27x150, T30x130, T45x200.

JWS05A408S8 PC 1/2” DR HEX BIT IMPACT SOCKET SET (MM)

- Contains H5, H6, H8, H10, H12, H14, H17, H19- Contained in a blow molded case

JWS26H22801/4” DR. UNIVERSAL SPINNER HANDLE

- Multi purpose 1/4” socket driver. - Can be used as either a fixed driver or the sleeve can be retracted to release the inbuilt universal joint. - Deep reach - 280mm handle and extension - Oil resistant and comfort grip handle.

Driv

ers a

nd W

renc

hes

7

JWD71PP16S16 PC ANTI-SLIP GRIP SCREWDRIVER SET

-16 PCS high quality anti slip ergonomic screw driver kit, - Comes complete with:

- 8 Flat head Screw Drivers: 6.5x38, 3x50, 6.5x100,5.5x125, 5.5x200, 8x150, 5.5x75, 4x150 - 8 Phillips Head: PH2x38, PH1x150,, PH0x60, PH1x80, PH2x150, PH3x150, PH1x38

JWD70PP10S10 PC MECHANIC GO THRU IMPACT SCREWDRIVER

- Ergonomically designed - Handle is made from impact and cold resistant CrMoVa.- Can be used as punch, chisel, screwdriver or pry bar- The top of the tool is fitted with a flat edge that can be used with a wrench to get greater torque,- Can withstand a 3000g impact from hammer. - Kit comes with -

- Phillips head - 1.0x75, 2.0x100, 3.0x125, 2.0x38- Flat head - 5.5x100, 6.5x125, 8.0x150, 9.5x175, 6.5x38

JWW27AS6 6” ADJUSTABLE ANGLE WRENCH

JWW27AS8 8” ADJUSTABLE ANGLE WRENCH

JWW27AS10 10” ADJUSTABLE ANGLE WRENCH

JWW25108S 8PCS OPEN END WRENCH SET (MM)

- Chrome Vanadium, - Chrome plated, - Heat Treated, - Contains 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22mm.

JWW84108S 8PCS SUPER TECH COMB WRENCH SET

JWW66207S 7PCS FLEXI (SAE)

JWW66107S 7PCS FLEXI (MM)

As with the Super Tech Socket series, the combination wrenches fit Metric 6pt, Metric 12pt, SAE 6pt, SAE 12pt, E-TORX, Spline, Square, Square & 50% rounded.- The point of contact is on the flats of the nut or bolt instead of the points which distributes power evenly without damaging the nuts or bolts.- Set includes - 8, 10, 11, 12, 13, 14, 17 and 19mm

72 Teeth Flexible Head Ratcheting Combo Wrench

- Sizes include: 8,10,11,13,14,17,19mm

- Sizes include: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”

- 72 Teeth provides 5 degrees between each catch making it easy to work in tight locations,- Patented high torque design that meets or exceeds ANSI and DIN standards,- Chrome Vanadium,- Mirror Finish.

Wrenches

8

9

JWM63106S 6 PC PIN PUNCH SET

- Phosphate sunk finish, - Sizes include: 2x8.0x115mm, 3x8.0x125mm, 4x9.5x150mm, 5x9.5x165mm, 6x12.7x180mm, 8x12.7x180mm

JWMHS100AG HEAVY DUTY HACKSAW W/ 12” H.S.S. BLADE

- Set blade positions at 45o or 90o

- Made of light weight cast aluminum for minimal blade movement,- High tension counter lever cranking handle allows for optimal tension on blade,- Blades can be stored in top bar,- Blade can be inserted in the front end of tube for use as a compass saw.

HAMMERS

JWM64105S 5PCS CHISEL-PUNCH SET

- Phosphate sunk finish ,- Includes: Pin Punch, Cape Chisel, Cold Chisel, Taper Punch, Centre Punch

Ham

mer

s and

Pun

ches

PRODUCT NO. DESCRIPTIONJWM07016 SOFT FACE HAMMER, SIZE: 16 OZJWM04032 BALL PEEN HAMMER, SIZE: 32 OZJWM04016 BALL PEEN HAMMER, SIZE: 16 OZ

10

General Tools

JWAI050002 OIL FILTER WRENCH 3 LEG, 2 WAY

- Can fit oil filters 65mm to 120mm (2-1/2” to 4”), - 3/8” and 1/2” square drive with 19mm male hexagon adapter,- Drives in both directions.

JWAR030004 HEAVY DUTY CIRCUIT TESTER

- High quality electrical tester for 6 and 12 volt systems, - Heavy duty ground clip and insulator, - 5” rubber insulated wire with retaining spring ensures this tool can withstand rugged use, - Replaceable bulb

JWAI030022 4PCS MINI HOOK & PICK SET

- Stainless Steel picks with acetate handle,Kit Contains - Combination Pick, 90 Deg Pick, Straight Pick, Hook Pick

JWAI030027 6PCS PICK AND HOOK SET

-Chrome-Vanadium steel shafts with high-polished chrome plated finish,-Resistant to acids, fluids and solvents,-Long 45cm shaft for added reach with 8mm diameter for added strength,-Ergonomic handle.

JWAI050024 4PC PRY BAR SET

Contains 17/16”x609mm, 7/16”x457mm, 3/8”x305mm, 1/4”x203mm

11

JWC-7DW136 136PCS PROFESSIONAL MECHANICS 7 Drawer Tool Trolley complete with 136 professional high quality tools. Tools included -

• Off Set Ring Wrench set,• Combination Wrench set,• Hex Key set,• Pliers set,• Socket set - 1/4”, 3/8” and

1/2” set,• Screwdriver set,• Hammer and Chisel set,• Adjustable Wrench and

Plier set,• Internal and External Plier

set.

JWC-6DA4 6 DRAWER MEDIUM TOOL TOP CHEST

JWC-5DW15 DRAWER TOOL TROLLEY WITH WORKING TABLE W/ BALL BEARING SLIDES

JWC-11DW42 11 DRAWER ROLL WAGON W/ BALL BEARING SLIDES ATO RETURN

Tool

Box

and

Tro

lley

$649

All prices are recommended retail prices only and include GST. Whilst every effort is made to ensure that advertised stock is available upon request, due to factors beyond the control of the distributor, not all stock advertised in this catalogue may be available when required. The distributor reserves the right to change prices at any time to correct price errors or adjust for increase in cost. Due to manufacturing constraints product sizes and colours may vary from images shown in this catalogue. A freight charge may be applicable for some items, please check prior to ordering.

Supplied By: