PLGR-96 Precision Lightweight GPS Receiver1.pdfPPS security modules must be obtained through Foreign Military Sales (FMS) procurement. (319) 295-5100 FAX (319) 295-4777 Rockwell Collins

1 January 2001 Navigation and Landing Systems

PLGR-96 PRECISION LIGHTWEIGHT GPS RECEIVER

KEY FEATURES/USER BENEFITS

Precision Lightweight GPS Receiver Providing Advanced P/Y Code Positioning Accuracy

• Wide Area GPS Enhancement (WAGE) for autonomous positioning accuracy to 4meters CEP

• Secure (Y-code) Differential GPS (SDGPS) for positioning accuracy to less than1 meter CEP

• Jammer direction finding

• Targeting interface with laser range-finding

• Remote display terminal capability

• Advanced user interface features

• Available in both Precise Positioning Service (PPS*) and Standard PositioningService (SPS) versions

The PLGR equipment is available on General Services Administration (GSA) ContractNo. GS-35F-5926H to all U.S. Federal Agencies.

*Export of PPS units is authorized for GPS Memorandum of Understanding countriesonly. PPS security modules must be obtained through Foreign Military Sales (FMS)procurement.

(319) 295-5100FAX (319) 295-4777

Rockwell CollinsGovernment Systems

[email protected] 4.16–1

Navigation and Landing Systems 1 January 2001


OVERVIEW

PLGR+96, retains the low price, extended battery life and advanced navigational featuresof PLGR+, while incorporating advanced P/Y code positioning technologies, therebyincreasing the unit’s accuracy to the sub-meter level.

DESCRIPTION

PLGR+96 is flexible enough to meet the needs of a wide variety of military users. Inaddition to handheld operation, the PLGR+96 units can be installed into various armoredvehicles and airborne platforms with an optional vehicle-mount accessory. PLGR+96 canalso be reprogrammed on-site at a rate of up to 900 units per day, minimizing downtimeas PLGR units are upgraded with the latest secure GPS capabilities.

Rockwell continues the commitment to World Class Customer Support, Field ServiceEngineering, Depot Maintenance and Logistics Support. PLGR+96 is a viable, lowcost high capability product that will continue to be produced for several years. If youparticipate in our unique leasing program, you can even receive your Precise PositioningService* (PPS) PLGR+96 units within 30 days of placing your order.

With the advancements of PLGR+96, Rockwell should remain your only choice whenproviding secure military GPS needs.

SPECIFICATIONS

Physical Characteristics

Size: 72 in³, 8.2”h x 5.25”w x 2.6”d

Weight: < 2.7 pounds (with BA 5800 battery)

Power: External: 9 to 32 V DC from 5 W source

Battery: Lithium Nickel Cadmium Alkaline AA

Temperature Range: -20 C to + 70º C(-57º C to +85º C storage)

Humidity: 0 to 100% (no precipitation)

4.16–2


[email protected](319) 295-5100

FAX (319) 295-4777



System Characteristics

Dynamics: Velocity: 1,200 m/sec. maximum

Acceleration: 9 g maximum

Time Accuracy: 100 nanoseconds

Position Accuracy: SDGPS: < 1 meter

CEPWAGE: < 4 meters

CEPPPS: <16 meters

SEPSPS: <100 meters SEP

Acquisition Time: Time-to-first-fix < 90 sec.

Time-to-subsequent-fix < 60 sec.

Velocity accuracy: 0.03 m/sec RMS steady rate

Storage Capacity: 999 usable waypoints15 user-definablereversible routes of up to 25 legs each

MTBF: >15,000 hours

Battery Life: BA5800* 27 hours

8 AA Alkaline 10 hours

NiCad 4 hours

Coordinate Systems: 8 predefined, 3 user-defined

Datums: 50 predefined, 2 user-defined

Note(s): * Not supplied by Rockwell Collins

Interfaces• RS-232 or RS-422

• KYK-13 / KOI-18 / AN/CZY-10 / DS-102*

• NMEA 0183

• Laser Range-Finding

• Remote Display Terminal

• Direct RTCM SC-104 (DGPS)

• HAVE QUICK (SS110990)

• SINCGARS

• PLGR precise time (SS-M/V-500)

• External power and antenna

• PLGR+96™ to PLGR family of products

(319) 295-5100FAX (319) 295-4777





Advanced User Interface Features• Enhanced satellite vehicle (SV) selection for reduced re-acquisition time

• “Man-Overboard” function for automatic navigation to a marked waypoint

• Hot key toggles between Tracking and STBY modes

• Self-zeroized warning

• Display of minutes since fix after transition to STBY

• Mission rehearsal

SELECTION GUIDE

Typical Order List for Handheld Use:

Item Description Part Number

PLGR Receiver GPS Receiver and Security Devices(see detail below)

822-0077-xxx (PPS),822-0255-xxx (SPS)

Battery Holder AA Battery Holder – 8-cell 221-0135-020

Memory Battery AA-size 3.6V Lithium 221-0500-020

Manual Operations & Maintenance Manual See Manual section

Carrying Case Nylon Case 021-0706-010

Typical Order List for Vehicle Installation:

Item Description Part Number

PLGR Receiver GPS Receiver and Security Devices(see detail below)

822-0077-xxx (PPS),822-0255-xxx (SPS)

Rechargeable Battery Ni-Cad Battery 221-0134-020

Memory Battery AA-size 3.6V Lithium 221-0500-030

Manual Operations & Maintenance Manual See Manual section

Remote Antenna L1 Remote Antenna with MagneticMount

013-1925-040

Antenna Cable Remote Antenna Cable (5 meters) 426-0141-050

Power Cable Vehicle Power Cable (5 meters) 426-0144-010

Vehicle Mount Vehicle Mount 986-0645-001

Carrying Case Nylon Case 021-0706-010

4.16–4



FAX (319) 295-4777



PLGR Receivers:

Type Number Description Part Number

Receivers PLGR+96 PPS*PLGR+96SPSPLGR+96 SPS Arabic(Tan)**PLGR+96 SPS Arabic(Green)**

822-0077-103822-0255-103822-0255-123822-0255-023

*Contains Security module for PPSUnit

AOCPPS-SM

351-8981-010995-8382-002

Note(s): * Each PPS unit must have written approval from Joint Program Office, USAF310-363-3482/Fax 310-363-3844 See RULES FOR OBTAINING NAVSTARGLOBAL POSITIONING SYSTEM SECURITY DEVICES (available upon request).

** Contact GS for further information regarding foreign languages or other specialrequirements.

TYPICAL SYSTEM

PLGR Hardware Kit

Includes the following accessories: 988-4759-001

-Carrying Case -Magnetic MountAntenna

-Remote AntennaCable

-Full Pinout Cable

-Memory Battery -AA Battery Holder -NiCad Prime Battery -Vehicle Power Cable

-NiCad BatteryCharger - 1 Station

-Power Adapter(AC/DC)

-PLGR-PLGR Cable -PC Cable

-PLGR- HAVEQUICKCable

-PLGR- SINCGARSCable

(319) 295-5100FAX (319) 295-4777





SELECTION GUIDE - ACCESSORIES

Mounts and Cases

PLGR Vehicle InstallationMount

986-0645-001

(NSN 5975-01-375-1302)

• Secures PLGR with ametal latch.

• Clearance provided fordata, antenna, and powercables.

• Key fill port accessiblewhile in mount.

• Prime battery may bereplaced while PLGR isinstalled in mount.

PLGR Carrying Case

021-0706-010

(NSN 5895-01-375-7528)

• Green, non-rigid, nylonbag.

• Adjustable shoulder strap.

• Two web belt clips.

• Pockets to hold PLGRaccessories, such as:spare battery, PLGR toPLGR cable, and QuickReference Guide.

External Antennas

Helmet Antenna

013-1925-070

(NSN 5985-01-374-7757)

• Use with Helmetantenna mount (CPN013-1928-010).

• Integral coaxial cable.

• 1.5 meter cable.

Helmet Antenna Mount

013-1928-010

(NSN 5975-01-375-1301)

• Green nylon pouch holdsHelmet antenna (CPN013-1925-070).

• Elastic straps and metalclips fasten to rim ofhelmet.

4.16–6



FAX (319) 295-4777



External Antennas

Magnetic Mount Antenna

013-1925-040

(NSN 5985-01-375-4660)

• Magnet rated to 70 milesper hour.

• Bolt hole provided formore secure mounting.

• Side mount SMAconnector.

Airborne Antenna

013-1934-010

(NSN 5985-01-391-2947)

• TSO approved.

• Four bolt mounting.

• Bottom mount TNCconnector.

• O-ring included.

Remote Antenna

013-1925-100• Four bolt mounting.


Remote Antenna

013-1925-110• Thru-hole mount with jam

nut.


Cables

(319) 295-5100FAX (319) 295-4777





External Antennas

Remote Antenna Cable

426-0141-050: 5 meter, SMA

(NSN 6150-01-375-8662)

426-0141-080: 5 meter, TNC

426-0141-120: 10 meter, SMA

426-0141-130: 10 meter, TNC

• Use with:

• Airborne Antenna (TNC).

• Magnetic Mount Antenna(SMA).

• Remote Antenna (TNC).

PLGR to PLGR Cable

426-0141-020

(NSN 6150-01-375-8663)

• Provides data transferpath between two PLGRs.

• Transfer data includes:setup, waypoints, routes,time, satellite data.

• Also used to connectPLGR to Remote Display.

• 1.1 meters.

PLGR Cable

426-0141-030• Equipped with 15

pin PLGR serial portconnector.

• Open ended, customizefor specific application.

• 5 meters.

PLGR to PC Cable

426-0141-010

(NSN 6150-01-375-8664)

• Provides the data transferpath between PLGR andPC.

• PC side equipped withstandard 9 pin D-shellconnector.

• 3.1 meters.

4.16–8



FAX (319) 295-4777



External Antennas

HAVEQUICK Cable

426-0141-040

(NSN 6150-01-375-8665)

• Provides for data output toa HAVEQUICK compatibledevice.

• The HAVEQUICK end ofthe cable has stripped andtinned wires.

• 3.1 meters.

SINCGARS Cable

426-0141-070

(NSN 6150-01-375-8666)

• Provides for SINCGARSTime Fill data input to aSINCGARS compatibledevice.

• Six pin audio plug at eachend.

• 3.1 meters.

Integrated WeatherproofInterface Cable

988-1186-001: no auxconnectors

988-1186-002: auxconnectors

988-1186-003: no auxconnectors

• Connectivity for data,antenna, power, andSINCGARS.

• Integrated data, antenna,and power connectors.

• TNC RF cable connector.

• Length:

• -001 / -002: 1.5 meters.

• -003: 3.6 meters.

(319) 295-5100FAX (319) 295-4777





Power Options

Vehicle External Power Cable

426-0144-010

(NSN 6150-01-375-8661)

• Use to connect PLGR toDC power source.

• PLGR connection canbe secured to preventinadvertent removal.

• Lugs installed on sourceend of cable.

• In-line fuse holderinstalled.

• 5 meters.

Cigarette Lighter AdapterCable

988-2163-001

• PLGR connection canbe secured to preventinadvertent removal.

• Right angle power plug.

• In-line fuse protected.

• Coiled cord.

Power Adapter

COM218-0325-020

(NSN 6130-01-376-2168)

• Connects the PLGR to anAC power source.

• Switchable between 110and 220 volts.

• Two prong, NorthAmerican style plug.

• Operates on 50 or 60 Hz.

• 1.8 meter cord.

NiCad Prime Battery

221-0134-020

(NSN 6140-01-400-2902)

• Rechargeable primebattery

4.16–10



FAX (319) 295-4777



NiCad Battery Chargers

1 Station: 270-2547-040

3 Station: 270-2547-050

6 Station: 270-2547-060

• Can be powered by110/220VAC (switchable)or 12VDC

• Charging and Doneindicator lights.

• Circuit breaker protected.

AA Battery Holder

221-0135-020

(NSN 6160-01-385-4358)

• Use as prime battery.

• Hold 8 AA batteries.

Memory Battery

PLGR: 221-0500-020

(NSN 6135-01-301-8776)

• Used to maintain memorycircuits when prime powerhas been removed.

• 3.6VDC lithium cell.

Software Upgrade:

PLGR-96 SPS Upgrade - Software Only 613-9912-002

PLGR-96 PPS Upgrade - Software Only 613-9868-005

GLS and Federal Version Upgrades - SoftwareOnly

613-9868-015

Note(s): (PLGR+GLS Upgrade is compatible with hardware versions 822-0077-003 and822-0077-103 only)

(319) 295-5100FAX (319) 295-4777





PLGR Compatible Software

Remote Control/MissionPlanning System Software

DOS based software and instructionmanualThe software runs on IBM-typepersonal computers, providing both MissionPlanning functions and remote control of thereceiver.

Receiver setup and initialization

Waypoints and route editing

Log receiver serial port messages (time mark)

Control the receiver remotely

523-0778139

Keyboard Menu DefinitionEditor

Windows based program that allows forselective enabling of menu items andindividual pages. This capability allowsfor customization of the PLGR for trainingpurposes or to support operation-specificapplications.

613-9454-001

Note(s): **No Part Number Required

A PC Cable, P/N 426-0141-010 is required when using the above softwarepackages

4.16–12



FAX (319) 295-4777



(319) 295-5100FAX (319) 295-4777





4.16–14



FAX (319) 295-4777



(319) 295-5100FAX (319) 295-4777





4.16–16



FAX (319) 295-4777



SUPPORT OFFERINGS

Product Information Material is normally available at no charge and can be obtained bycontacting GS Customer Relations:

Phone:800-321-2223 or (319) 295-5100Fax: (319) 295-4777

(319) 295-5100FAX (319) 295-4777



Documents

PLGR-96 Precision Lightweight GPS Receiver1.pdfPPS security modules must be obtained through Foreign Military Sales (FMS) procurement. (319) 295-5100 FAX (319) 295-4777 Rockwell Collins