PLC-XU115 - Panasonic · MODEL PLC-XU115 Owner’s Manual Network Supported Wireless LAN IEEE802.11b/g Wired LAN 100-Base-TX/10-Base-T Memory Viewer SD Card Memory Viewer * Refer

Multimedia Projector

MODEL PLC-XU115

Owner’s Manual

Network Supported □WirelessLAN IEEE802.11b/g □WiredLAN 100-Base-TX/10-Base-T Memory Viewer □SDCardMemoryViewer

* Refertotheowner’smanualsbelowfordetailsaboutnetworkandmemoryviewerfunction.

■ NetworkSet-upandOperation ■ Memoryviewer

�

�

Features and DesignThisMultimediaProjectorisdesignedwiththemostadvancedtechnologyforportability,durability,andeaseofuse.Thisprojectorutilizesbuilt-inmultimediafeatures,apaletteof16.77millioncolors,andmatrixliquidcrystaldisplay(LCD)technology.

◆ Compact Design Thisprojectorisdesignedcompactinsizeandweight.

It iseasytocarryandinstalledanywhereyouwishtouse.

◆ Capable of �60-degree Projection Thisprojectoriscapableof360-degreeprojection.

*Somerestrictionrequired,seepage8.

◆ Simple Computer System Setting TheprojectorhastheMulti-scansystemtoconformto

almostall computeroutput signalsquickly (p.32).UptoUXGAresolutioncanbeaccepted.

◆ Useful Functions for Presentations -Thedigitalzoomfunctionallowsyoutofocusonthe

crucialinformationduringapresentation(p.39).

-Blackboards* canbeusedasaprojection screen.*TheboardcolorislimitedtoGreen(pp.36,43).

◆ Power Management ThePowermanagement function reduces power

consumptionandmaintainsthelamplife(p.52).

◆ Lamp Control Brightnessof theprojection lampcanbe selected

(pp.28,53).

◆ Quick Termination TheACpower cord canbeunplugged immediately

after turningoff theprojectorwithoutwaiting for theterminationofthecoolingfanrotation(p.23).

◆ Logo Function TheLogofunctionallowsyoutocustomizethescreen

logo (pp.49–50).You can capturean image for thescreen logoanduse it for the starting-updisplayorbetweenpresentations.

◆ Multilanguage Menu Display Operationmenuisavailablein16languages;English,

German,French,Italian,Spanish,Portuguese,Dutch,Swedish, Finnish, Polish,Hungarian,Romanian,Russian,Chinese,Korean,andJapanese(p.47).

◆ Security Function TheSecurity functionhelps you to ensure security

of theprojector.With theKey lock function, you canlocktheoperationonthetopcontrolorremotecontrol(p.54).PIN code lock functionpreventsunauthorizeduseoftheprojector(pp.22,54–55).

◆ Helpful Maintenance Functions Lampand filtermaintenance functions provide for

betterandpropermaintenanceoftheprojector.

◆ LAN Network Function This projector is loadedwith theWiredandWireless

LANnetwork function.Youcanprojectan imageonacomputeraswellasoperateandmanagetheprojectorvia network.For details, refer to theowner’smanual“NetworkSet-upandOperation.”

◆ Memory Viewer Function InsertthededicatedSDcardmemoryintotheprojector

to project imagesor presentationdata storedwithin.Youdonothavetocarrycomputersorotherequipmentforapresentation.

*SDcardmemory is not suppliedwith theprojector.For details, refer to theowner’smanual ofMemoryviewer.

◆ Input Search Function Inputsignalcanbesearchedautomatically.(p.51)

Notes: •TheOn-ScreenMenuandfiguresinthismanualmaydifferslightlyfromtheproduct. •Thecontentsofthismanualaresubjecttochangewithoutnotice.

�

Table of Contents

TrademarksEach name of corporations or products in this book is either a registered trademark or a trademark of its respectivecorporation.

Features and Design . . . . . . . . . . . . . . . . . . .�Table of Contents . . . . . . . . . . . . . . . . . . . . . .�To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . .5Safety Instructions . . . . . . . . . . . . . . . . . . . . .6

AirCirculation 7MovingtheProjector 7InstallingtheProjectorinProperDirections 8

Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . .9Part Names and Functions . . . . . . . . . . . . .10

Front 10Back 10Bottom 10RearTerminal 11TopControl 12RemoteControl 13LaserPointerFunction 14PointerFunction 14WirelessMouseOperation 15RemoteControlCode 15RemoteControlBatteryInstallation 16RemoteControlOperatingRange 16AdjustableFeet 16

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .17PositioningtheProjector 17ConnectingtheACPowerCord 18ConnectingtoaComputer 19ConnectingtoVideoEquipment20ConnectingtoComponentVideoEquipment 21

Basic Operation . . . . . . . . . . . . . . . . . . . . . .��TurningOntheProjector 22TurningOfftheProjector 23HowtoOperatetheOn-ScreenMenu 24MenuBar 25ZoomandFocusAdjustment 26AutoSetupFunction 26KeystoneCorrection 26SoundAdjustment 27RemoteControlOperation 28

Computer Input . . . . . . . . . . . . . . . . . . . . .�0InputSourceSelection(RGB:Computer1(Analog)/Computer2) 30

InputSourceSelection(RGB(PCdigital),RGB(AVHDCP)) 31ComputerSystemSelection 32AutoPCAdjustment 33ManualPCAdjustment 34ImageModeSelection 36ImageAdjustment 37ScreenSizeAdjustment 38Forzoominginandouttheimages39

Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .�0InputSourceSelection(Video,S-video) 40InputSourceSelection(Component,RGBScart21-pin) 41VideoSystemSelection 42ImageModeSelection 43ImageAdjustment 44ScreenSizeAdjustment 46

Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .�7Setting 47

Maintenance and Cleaning . . . . . . . . . . . . .58WarningIndicator 58CleaningtheFilter 59ResettingtheFilterCounter 59AttachingtheLensCap60CleaningtheProjectionLens 60CleaningtheProjectorCabinet 60LampReplacement 61ResettingtheLampCounter 62

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . .6�Troubleshooting 63MenuTree 67IndicatorsandProjectorCondition 69CompatibleComputerSpecifications 70TechnicalSpecifications 72OptionalParts 73PJLinkNotice 74ConfigurationsofTerminals 75PINCodeNumberMemo 76Dimensions77

5

To the Owner

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) . NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SERVICING TO QUALIFIED SERVICE PERSONNEL .

THIS SYMBOL INDICATESTHATDANGEROUSVOLTAGECONSTITUTINGARISKOFELECTRICSHOCKISPRESENTWITHINTHISUNIT.

THIS SYMBOL INDICATES THAT THEREAREIMPORTANTOPERATINGANDMAINTENANCEINSTRUCTIONS IN THE OWNER'S MANUALWITHTHISUNIT.

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

Before installing andoperating this projector, read thismanualthoroughly.This projector providesmany convenient features andfunctions. Operating the projector properly enablesyou tomanage those featuresandmaintains it ingoodconditionformanyyearstocome.Improperoperationmayresultinnotonlyshorteningtheproduct-life,butalsomalfunctions, firehazard,orotheraccidents.Ifyourprojectorseemstooperateimproperly,readthismanualagain,checkoperationsandcableconnectionsand try the solutions in the “Troubleshooting” sectionin thebackof thisbooklet. If theproblemstill persists,contactthedealerwhereyoupurchasedtheprojectorortheservicecenter.

Safety Precaution

CAUTIONDO NOT SET THE PROjECTOR IN GREASy, wET, OR SMOKy CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOwN OR A DISASTER . IF THE PROjECTOR COMES IN CONTACT wITH OIL OR CHEMICALS, IT MAy BECOME DETERIORATED .

READ AND KEEP THIS OwNER'S MANUAL FOR LATER USE .

wARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE .

–Thisprojectorproducesintenselightfromtheprojectionlens. Do not stare directly into the lens, otherwiseeye damage could result. Be especially careful thatchildrendonotstaredirectlyintothebeam.

–Installtheprojectorinaproperposition.Otherwiseitmayresultinfirehazard.

–Allowingtheproperamountofspaceonthetop,sides,and rear of theprojector cabinet is critical for properair circulationand coolingof theunit.Thedimensionshown here indicate theminimum space required.If the projector is to be built into a compartment orsimilarlyenclosed, theseminimumdistancesmustbemaintained.

–Donotcovertheventilationslotontheprojector.Heatbuild-upcan reduce theservice lifeofyourprojector,andcanalsobedangerous.

–Iftheprojectorisunusedforanextendedtime,unplugtheprojectorfromthepoweroutlet.

0 .7’(�0 cm)

1 .5’(50 cm) �’(1 m) 1 .5’(50 cm)

SIDEandTOP REAR

NOTE: Thissymbolandrecyclesystemareapplied toEUcountriesonlyandnotappliedtothecountriesintheotherareaoftheworld.

YourSANYOproduct is designed andmanufacturedwith highqualitymaterialsand componentswhich canbe recycledandreused.This symbolmeans that electrical andelectronic equipment, at their end-of-life,should bedisposedof separately fromyourhouseholdwaste.

Please dispose of this equipment at your localcommunitywaste collection/recycling centre. In theEuropeanUnionthereareseparatecollectionsystemsforusedelectricalandelectronicproducts.Pleasehelpustoconservetheenvironmentwelivein!

CAUTIONNot for use in a computer room as defined in theStandardfortheProtectionofElectronicComputer/DataProcessingEquipment,ANSI/NFPA75.

Nepeut être utilisé dansune salle d’ordinateurs tellequedéfinie dans la normeANSI/NFPA75StandardforProtection ofElectronicComputer/DataProcessingEquipment.

6

Safety InstructionsAll thesafetyandoperating instructionsshouldbe readbeforetheproductisoperated.

Readall of the instructionsgivenhereand retain themforlateruse.UnplugthisprojectorfromACpowersupplybefore cleaning.Donot use liquid or aerosol cleaners.Useadampclothforcleaning.

Follow allwarnings and instructionsmarked on theprojector.

For addedprotection to theprojector duringa lightningstorm,orwhenit is leftunattendedandunusedfor longperiodsof time, unplug it from thewall outlet.Thiswillpreventdamageduetolightningandpowerlinesurges.

Donot expose this unit to rain or usenearwater... forexample, in awet basement, near a swimmingpool,etc...

Do not use attachments not recommended by themanufacturerastheymaycausehazards.

Donot place this projector onanunstable cart, stand,or table.Theprojectormay fall, causing serious injurytoachildoradult,andseriousdamagetotheprojector.Use onlywith a cart or stand recommended by themanufacturer, or soldwith theprojector.Wall or shelfmounting should follow themanufacturer’s instructions,and should use a mounting ki t approved by themanufacturers.

An appl iance and cart combinat ionshouldbemovedwith care.Quick stops,excessive force, and uneven surfacesmay cause the app l iance and car tcombinationtooverturn.

Slotsandopeningsinthebackandbottomofthecabinetareprovided forventilation, toensure reliableoperationoftheequipmentandtoprotectitfromoverheating.

Theopenings should never be coveredwith cloth orothermaterials, and thebottomopening shouldnot beblockedbyplacing theprojectoronabed,sofa, rug,orother similar surface.This projector shouldnever beplacednearoroveraradiatororheatregister.

This projector should not be placed in a buil t- ininstallationsuchasabookcaseunlessproperventilationisprovided.Never push objects of any kind into this projectorthrough cabinet slots as theymay touch dangerousvoltagepoints or short out parts that could result in afireorelectricshock.Neverspillliquidofanykindontheprojector.

Donot install theprojector near the ventilationduct ofair-conditioningequipment.

This projector shouldbeoperatedonly from the typeof power source indicatedon themarking label. If youarenotsureofthetypeofpowersupplied,consultyourauthorizeddealerorlocalpowercompany.

Donotoverloadwalloutletsandextensioncordsasthiscanresultinfireorelectricshock.Donotallowanythingto rest on thepower cord.Donot locate this projectorwherethecordmaybedamagedbypersonswalkingonit.

Do not attempt to service this projector yourself asopening or removing covers may expose you todangerousvoltageorotherhazards.Referall servicingtoqualifiedservicepersonnel.

Unplugthisprojectorfromwalloutletandreferservicingto qualified service personnel under the followingconditions:a.Whenthepowercordorplugisdamagedorfrayed.b.Ifliquidhasbeenspilledintotheprojector.c.Iftheprojectorhasbeenexposedtorainorwater.d.Iftheprojectordoesnotoperatenormallybyfollowingtheoperating instructions.Adjust only those controlsthat are covered by the operating instructions asimproperadjustmentof other controlsmay result indamageandwill often requireextensiveworkbyaqualified technician to restore theprojector tonormaloperation.

e.If theprojectorhasbeendroppedor thecabinethasbeendamaged.

f.When the projector exhibits a distinct change inperformance-thisindicatesaneedforservice.

When replacement parts are required, be sure theservicetechnicianhasusedreplacementpartsspecifiedby themanufacturer thathave thesamecharacteristicsas theoriginal part.Unauthorized substitutionsmayresultinfire,electricshock,orinjurytopersons.

Upon completion of any service or repairs to thisprojector, ask the service technician to perform routinesafety checks to determine that theprojector is in safeoperatingcondition.

7

Safety Instructions

Openings in thecabinetareprovided forventilation.Toensurereliableoperationoftheproductandtoprotectitfromoverheating, theseopeningsmust not beblockedorcovered.

CAUTION

Hotairisexhaustedfromtheexhaustvent.Whenusingor installing the projector, the following precautionsshouldbetaken.–Donotputanyflammableobjectorspraycanneartheprojector,hotairisexhaustedfromtheairvents.

–Keeptheexhaustventatleast3’(1m)awayfromanyobjects.

–Do not touch a peripheral part of the exhaust vent,especiallyscrewsandmetallicparts.Theseareaswillbecomehotwhiletheprojectorisbeingused.

–Donotputanythingonthecabinet.Objectsputonthecabinetwillnotonlygetdamagedbutalsomaycausefirehazardbyheat.

Cooling fans are provided to cool down the projector.The fans’ running speed is changed according to thetemperatureinsidetheprojector.

CAUTION IN CARRyING OR TRANSPORTING THE PROjECTOR

–Donotdroporbumptheprojector,otherwisedamagesormalfunctionsmayresult.

–Whencarryingtheprojector,useasuitablecarryingcase.

–Donot transport theprojectorbycourieroranyothertransportservice inanunsuitabletransportcase.Thismay cause damage to the projector. For informationabouttransportingtheprojectorbycourieroranyothertransportservice,consultyourdealer.

–Donotputtheprojectorinacasebeforetheprojectoriscooledenough.

Moving the ProjectorWhenmoving theprojector, replace theLensCapandretract adjustable feet to prevent damage to the lensandcabinet.Whentheprojectorisnotinuseforanextendedperiod,put it into thesuppliedcarryingcasewith the lenssideup.

CAUTION

The carrying case (supplied) is intended for protectionagainst dust and scratches on surface of the cabinet,and it is not designed to protect an appliance fromexternalforces.Donottransporttheprojectorbycourieror anyother transport servicewith this case, otherwisethe projector can be damaged.When handling theprojector,donotdrop,bump,subject ittostrongforces,orputotherthingsonthecabinet.

AirIntakeVent

AirIntakeVent

ExhaustVent(Hotairexhaust)

AirIntakeVent

Air Circulation

AirIntakeVent

8

Safety Instructions

Usetheprojectorproperlyinspecifiedpositions.Improperpositioningmayreducethelamplifeandresultinsevereaccidentorfirehazard.Thisprojectorcanprojectthepictureupward,downward,orbackward,perpendiculartotheplaneofthescreenasshowninthefigurebelow.

Bottom Downward

(Usual)

Front Downward

Bottom Upward

Front Upward

Installing the Projector in Proper Directions

Avoidpositioningtheprojectorasdescribedbelowwheninstalling.Positioning Precautions

Donotrolltheprojectormorethan10degreesfromsidetoside.

Donotputtheprojectoroneithersidetoprojectanimage.

10˚

10˚

10˚ 10˚

10˚ 10˚

Inupwardprojection,donottilttheprojectorover10degreesrightandleft.

Indownwardprojection,donottilttheprojectorover10degreesrightandleft.

0º180º

0º

180º

-50º

NG

GOOD

+50º

40º

50º50º

40º

BesuretosettheLampcontrolinHighandtheFancontrolinOn3inthesettingmenuwhenusingtheprojectorinclinedatbetween+40degreesto+140degreestothehorizontalplaneataltitudesbetween0andapproximately1,600metersabovesealevel.BesuretosettheFancontrolinOn2whenusingtheprojectorathigheraltitudesthanthealtitudesdescribedabove,regardlessoftheinstallationpositionoftheprojector.(p.56).

9

Compliance

Federal Communications Commission NoticeNote:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart 15of theFCCRules.These limits aredesigned to provide reasonable protectionagainst harmfulinterference in a residential installation.This equipmentgenerates, uses, and can radiate radio frequencyenergy, and if not installed andused in accordancewith the instructions,may causeharmful interferenceto radio communications.However, there is noguarantee that interferencewill not occur in a particularinstallation. If thisequipmentdoescauseharmful interference to radioor television reception,whichcanbedeterminedbyturningtheequipmentoffandon, theuser isencouragedtotry tocorrect the interferencebyoneormoreofthefollowingmeasures: –Reorientorrelocatethereceivingantenna. –Increasetheseparationbetweentheequipmentandreceiver. –Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. –Consultthedealeroranexperiencedradio/TVtechnicianforhelp.UseofshieldedcableisrequiredtocomplywithclassBlimitsinSubpartBofPart15ofFCCRules.Donotmakeanychangesormodificationstotheequipmentunlessotherwisespecifiedintheinstructions.Ifsuchchangesormodificationsshouldbemade,youcouldberequiredtostopoperationoftheequipment.ModelNumber:PLC-XU115TradeName :SanyoResponsibleparty:SANYOFISHERCOMPANYAddress :21605PlummerStreet,Chatsworth,California91311TelephoneNo.:(818)998-7322

TheACPowerCordsuppliedwiththisprojectormeetstherequirementforuseinthecountryyoupurchasedit.AC Power Cord for the United States and Canada:ACPowerCord used in theUnitedStates andCanada is listed by theUnderwritersLaboratories(UL)andcertifiedbytheCanadianStandardAssociation(CSA).ACPowerCordhasagrounding-typeAClineplug.Thisisasafetyfeaturetobesurethattheplugwillfitintothepoweroutlet.Donottrytodefeatthissafetyfeature.Shouldyoubeunabletoinserttheplugintotheoutlet,contactyourelectrician.

GROUND

AC Power Cord Requirement

AC Power Cord for the United Kingdom:Thiscordisalreadyfittedwithamouldedplugincorporatingafuse,thevalueofwhichisindicatedonthepinfaceoftheplug.Shouldthefuseneedtobereplaced,anASTAapprovedBS1362fusemustbeusedofthesamerating,markedthus ASA . If thefusecoverisdetachable,neverusetheplugwiththecoveromitted.Ifareplacementfusecoverisrequired,ensureitisofthesamecolourasthatvisibleonthepinfaceoftheplug(i.e.redororange).FusecoversareavailablefromthePartsDepartmentindicatedinyourUserInstructions.Iftheplugsuppliedisnotsuitableforyoursocketoutlet,itshouldbecutoffanddestroyed.Theendoftheflexiblecordshouldbesuitablypreparedandthecorrectplugfitted.wARNING : A PLUG wITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET .TheWiresinthismainsleadarecolouredinaccordancewiththefollowingcode: Green-and-yellow..Earth Blue . . . . . . . . . . . Neutral Brown . . . . . . . . . LiveAsthecoloursofthewiresinthemainsleadofthisapparatusmaynotcorrespondwiththecolouredmarkingsidentifyingtheterminalsinyourplugproceedasfollows:Thewirewhichiscolouredgreen-and-yellowmustbeconnectedtotheterminalintheplugwhichismarkedbytheletterEorbythesafetyearthsymbol orcolouredgreenorgreen-and-yellow.Thewirewhich is colouredbluemust be connected to the terminalwhich ismarkedwith the letterNorcolouredblack.Thewirewhich is colouredbrownmust be connected to the terminalwhich ismarkedwith the letter L orcolouredred.wARNING: THIS APPARATUS MUST BE EARTHED .

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILy ACCESSIBLE .

10

Kensington Security Slot Thisslot is foraKensington lockusedtodeter

theftoftheprojector. * KensingtonisaregisteredtrademarkofACCOBrands

Corporation.

Bottom

Back

① Infrared Remote Receiver② wIRELESS Indicator③ Focus Ring ④ Projection Lens 　⑤ Zoom Lever⑥ Lens Cap

⑦ Top Controls and Indicators⑧ Air Intake Vent

⑨ Exhaust vent

⑩ Speaker⑪ Air Intake Vent (back and bottom)⑫ Terminals and Connectors⑬ Power Cord Connector⑭ SD Card Slot⑮ LAN Connection Terminal

⑯ Lamp Cover⑰ Filters ⑱ Adjustable Feet⑯

⑮⑭⑬⑪

CAUTION

Hot air is exhausted from the exhaustvents.Do not put heat-sensitive objectsnearthisside.

Part Names and Functions

⑫

⑰

⑨

⑩

⑪Note: ② WIRELESS Indicator and⑮ LANConnection Terminal are for theNetwork function. Refer to theowner’smanual “NetworkSet-upandOperation”.

⑭ SD Card Slot is for the Memory Viewer function. Refer to the owner's manual "Memory Viewer fuction".

CAUTION

Donot turnonaprojectorwith lens capattached. High temperature from lightbeammaydamagelenscapandresultinfirehazard.

Front

⑱

⑥③ ④ ⑤① ⑦ ⑧②⑧

11


Rear Terminal

⑫ S-VIDEO IN Connect theS-VIDEOoutput signal fromvideo

equipmenttothisjack(p.20).

⑨ AUDIO IN Connect the audio output signal from video

equipmentconnectedto⑧or⑫tothisjack.Foramonoaudiosignal(asingleaudiojack),connectittotheL(MONO)jack(p.20).

⑩ COMPUTER/COMPONENT AUDIO IN Connect theaudiooutput (stereo) signal froma

computerorvideoequipmentconnectedto④or⑥tothisjack(pp.19,21).

⑧ VIDEO IN Connect the composite videooutput signal to this

jack(p.20).

④ COMPUTER IN �/COMPONENT IN Connectthecomputerorcomponentvideo(orRGB

Scart)outputsignaltothisterminal(pp.19,21). UsethesuppliedVGAcableoraComponent-VGA

cablecommerciallyavailable.

⑪ AUDIO OUT (VARIABLE) Connect an external audio amplifier to this jack

(pp.19–21). ThisterminaloutputssoundfromAUDIOINterminal

( ⑨or⑩ ).

① R/C jACK Whenusing thewired remote control, connect

thewiredremotecontroltothisjackwitharemotecontrolcable(notsupplied).

③ SERVICE PORTThisjackisusedtoservicetheprojector.

⑥ COMPUTER IN 1/DVI-I Connect computer output (Digital/AnalogDVI-I

type)tothisterminal(p.19).

⑬ SD Card Indicator Display the statusofSDcard.When insertingSD

Card, the indicator lights, andwhen removingSDCard,theindicatorturnsoff.

⑦ LAN Connection Terminal Connect the LAN cable (Refer to the owner's

manualof"NetworkSet-upandOperation".).

SD

① ② ③ ④ ⑤ ⑥ ⑦

⑧ ⑨ ⑩

② USB In order to operate the computerwith the remote

control and use thePAGE▲▼buttons on theremote control duringapresentation, connect theUSBportofthecomputertotheUSBterminalwithaUSBcable(notsupplied)(pp.13,19).

⑤ MONITOR OUT This terminal canbeused to output the incoming

RGBanalog signal from COMPUTER IN1andCOMPUTERIN2/COMPONENTINterminaltotheothermonitor(p.19).

⑪ ⑫ ⑬

⑭ SD Card Slot Insert the SD cardmemory (not supplied) for

Memoryvieweroperation.

⑭

1�


Top Control

①

②

④

⑥

⑦

⑧

① LAMP REPLACE indicator Lightsyellowwhentheprojectionlampreachesits

endoflife(pp.61,69).

⑦ wARNING indicator –Lightsredwhentheprojectordetectsanabnormal

condition. –Blinks redwhen the internal temperatureof the

projectorexceedstheoperatingrange(pp.58,69).② ON/STAND–By button

Turntheprojectoronoroff(pp.22–23).⑧ POwER indicator –Lightsredwhentheprojectorisinstand-bymode. –Lightsgreenduringoperations. –BlinksgreeninthePowermanagementmode(p.52).

③ INPUT button

Selectaninputsource(pp.30–31,40–41).

⑩ MENU button OpenorclosetheOn-ScreenMenu(p.24).

⑤ POINT▲▼◄► (VOLUME +/–) buttons –SelectanitemoradjustthevalueintheOn-Screen

Menu(p.24). –PantheimageintheDigitalzoom+mode(p.39). –Adjustthevolumelevel(Point◄►buttons)(p.27).

③

⑤

⑨ AUTO SETUP/CANCEL button –Correctverticalkeystonedistortionandadjust

computerdisplayparameterssuchasFinesync.,Totaldots,andPictureposition(pp.26,47).

–DisplaytheimageinSDcardorreturntothemenubarinMemoryViewermenu.

Refertotheowner'smanualof"NetworkSet-upandOperation".

⑨

⑩

⑥ SELECT button –Executetheselecteditem(p.24). –ExpandorcompresstheimageintheDigitalzoom

mode(p.39).

④ KEySTONE button

Correctkeystonedistortion(pp.26,48).

1�

㉖ NETwORK button

Select theNetwork input orMemory viewer input. See the owner'smanual of"NetworkSet-upandOperation".

To ensure safe operation, pleaseobservethefollowingprecautions:

–Donotbend,drop,orexposetheremotecontroltomoistureorheat.

–For cleaning, use a soft dry cloth. Donotapplybenzene,thinner,splay,oranychemicalmaterial.

Remote Control

①


⑤ ②

⑰

③④

② POwER ON/STAND-By button Turntheprojectoronoroff.(pp.22-23)

⑥ VIDEO button SelecttheVIDEOinputsource.(p.40)⑦COMPUTER button SelecttheCOMPUTERinputsource.(pp.30-31,41)

⑭ PAGE ▲▼buttonsScrollbackandforththepagesonthescreenwhengivingapresentation.Tousethesebuttons,connecttheprojectorandyourcomputerwithaUSBcable.(pp.11,19)

⑧AUTO PC button Automaticallyadjustthecomputerimagetoitsoptimumsetting.(pp.28,33,47)

⑯ D.ZOOM ▲▼buttons Zoominandouttheimages.(pp.28,39)

⑪ MENU button OpenorclosetheOn-ScreenMenu.(p.24)

⑰ RESET/ON/ALL-OFF switch Whenusing the remotecontrol, set this switch to “ON.”Set it to “ALLOFF” for

power savingwhen it isnotused. Slide this switch to "RESET" to initialize theremotecontrolcodeorswitchSpotlightandPointer to theLaserpointer function.(pp.14-15)

⑱ IMAGE button Selecttheimagemode.(pp.29,36,43)⑲ MUTE button Mutethesound.(p.27)

⑨ KEySTONE button Correctkeystonedistortion.(pp.26,48)⑩Point▲▼◄►(VOLUME+/–)buttons –SelectanitemoradjustthevalueintheOn-ScreenMenu.(p.24) –PantheimageintheDigitalzoom+mode.(p.39) –Adjustthevolumelevel.(Point◄►buttons)(p.27)

㉑ NO SHOw button Temporarilyturnofftheimageonthescreen.(p.29)

⑬ LASER button –OperatetheLaserpointerfunction.Laserbeamisemittedwhilepressingthis

buttonwithin1minute.Whenusingthislaserpointerformorethan1minute,releasetheLASERbuttonandpressitagain.(p.14)

–DisplaythePointeronthescreen.(p.14)

① L-CLICK buttonActastheleftmousebuttonforwirelessmouseoperation.(p.15)

④ SIGNAL EMISSION indicator Lightsredwhilethelaserbeamisbeingemittedfromthelaserlightwindowora

signalisbeingsentfromtheremotecontroltotheprojector.

⑫ FREEZE button Freezethepictureonthescreen.(p.28)

⑮ LAMP CONTROL button Selectalampmode.(pp.28,53)

⑳P-TIMER button OperatetheP-timerfunction.(p.29)

㉒R-CLICK button Actastherightmousebuttonforwirelessmouseoperation.(p.15)㉓ SELECT button –Executetheselecteditem.(p.24) – ExpandorcompresstheimageinDigitalzoommode.(p.39)㉔PRESENTATION POINTER button Moveapointeroftheprojectororapointerforwirelessmouseoperation.(pp.14-15)

③ wIRED REMOTE jackConnecttheremotecontrolcable(notsupplied)tothisjackwhenusingasawiredremotecontrol.Wireless remotecontroldoesnotworkwhen the remotecontrolcableisconnectedtotheprojector

㉕AUTO SET/CANCEL button–CorrectverticalkeystonedistortionandadjustthePCdisplayparameters.(pp.26,47)–DisplaytheimageinSDcardorreturntothemenubarinMemoryViewermenu.Refertotheowner'smanualof"NetworkSet-upandOperation".

⑤ LASER LIGHT window Alaserbeamisemittedfromhere(p.14).

⑧

⑮

⑪

⑨

⑩

⑭

⑥

⑦

⑫⑬

⑯

⑳

㉑

⑱

㉓

⑲

㉒

㉔

㉕

㉖

1�


Spotlight

Pointer Function

Pointer

LaserLightWindow

SignalEmissionIndicator

Laser Pointer Function

LASERbutton

PRESENTATIONPOINTERbutton

MENUbuttonNOSHOWbutton

This remote control emitsa laser beam from the laser lightwindow.Press theLASERbutton toactivate thelaserpointer.Thesignalemissionindicatorlightsredandtheredlaserbeamisemitted.IftheLASERbuttonispressedformorethanoneminuteorifitisreleased,thelaserlightgoesoff.ThelaseremittedisaClassIIlaser.Donotlookintothelaserlightwindoworpointthelaserbeamatyourselforotherpeople.Thefollowingisthecautionlabelforthelaserbeam.CAUTION: Useofcontrols,adjustmentsorperformanceofproceduresotherthanthosespecifiedhereinmay

resultinhazardousradiationexposure.Neverlookdirectlyintothelaserlightwindowwhilealaserisemitted,otherwiseeyedamagemayresult.

Thecautionlabelisputontheremotecontrol.

You canmove theSpotlight orPointer of the projectorwith the remote control to emphasize a part of theprojectedimage.

Press and hold theMENU andNOSHOWbuttonsfor more than 10 seconds to activate the Pointerfunction.(TheLaserpointerhasswitchedtothePointerfunction.)

1

Press the LASER button on the remote controlpointing toward theprojector.TheSpotlightorPointeris displayed on the screen with the LASER buttonlightinggreen.ThenmovetheSpotlightorPointerwiththePRESENTATIONPOINTERbutton. If the LASERbutton does not light green and continues to emit alaser beam, try the abovementioned procedure untiltheLASERbuttonlightsgreen.

�

Toclear theSpotlightorPointerout thescreen,pressthe LASERbutton pointing toward the projector andseeiftheLASERbuttonlightingisturnedoff.To switch to the Laser pointer again, press and holdtheNOSHOWandMENUbuttons formore than 10seconds or slide theRESET/ON/ALL-OFF switch to“RESET”andthento“ON”.WhenyouresetthePointerfunction,theremotecontrolcodewillbereset,aswell.

�

Note: •You can choose the size of Spotlight (Large/Middle/Small) and thepattern ofPointer (Arrow/Finger/Dot) intheSettingMenu.See“Pointer”onpage53.

Press and hold theMENUandNOSHOWbuttons formorethan10seconds.

PRESENTATIONPOINTERbutton

After the Laser pointer hasswitched to thePointer,usethe LASER button as thePointer function ON-OFFswitch. Press the LASERbutton pointing toward theprojector and see if it lightsgreen.

15

PRESENTATION POINTER button

R-CLICK button

L-CLICK button

Whi le p ress ing theMENUbutton, press theIMAGEbuttonnumberoftimes corresponding totheremotecontrolcode.

MENU button

IMAGE button

RESET/ON/ALL-OFF switch

Remote Control Code

Remote Control CodeNumber of Times Pressing IMAGE

ButtonCode 1 1Code � �Code � �Code � �Code 5 5Code 6 6Code 7 7Code 8 8

wireless Mouse OperationTheremotecontrolcanbeusedasawirelessmouseforyourcomputer.

Actsasleft(click)mousebuttonwhiletheprojectorand a computer areconnected with a USBcable.

Movethepointeronthescreenwiththisbutton.

Acts as right (click) mousebuttonwhile theprojectorandacomputerareconnectedwithaUSBcable.

Theeightdifferentremotecontrolcodes(Code1–Code8)areassignedtothisprojector.Switchingtheremotecontrol codes prevents interference fromother remote controlswhen several projectors or video equipmentnexttoeachotherareoperatedatthesametime.Changetheremotecontrolcodefortheprojectorfirstbeforechangingthatfortheremotecontrol.See“Remotecontrol”intheSettingMenuonpage53.

Press and hold theMENU and IMAGE buttons formore than fiveseconds toswitchbetween thecodes.The code switches sequentially for one pressing theIMAGEbutton.Seethelistbelow.

1

Toinitializetheremotecontrolcode,slidetheRESET/ON/ALL-OFFswitchto“RESET,”andthento“ON.”TheinitialcodeissettoCode1.

�


Beforeoperatingthewirelessmouse,connectyour computerand theprojectorwithaUSBcable (not supplied). See “Connecting to aComputer” on page 19.When the Pointerfunction is used, thewirelessmouse is notavailable.

1

When a USB cable is connected to thecomputer and the projector, turn on theprojector first, then the computer. If you turnon the computer first, the wirelessmousefunctionmaynotoperatecorrectly.

�

16


Adjustable Feet

Toensuresafeoperation,pleaseobservethefollowingprecautions: ● Usetwo(2)AAAorLR03typealkalinebatteries. ● Alwaysreplacebatteriesinsets. ● Donotuseanewbatterywithausedbattery. ● Avoidcontactwithwaterorliquid. ● Donotexposetheremotecontroltomoistureorheat. ● Donotdroptheremotecontrol. ● Ifthebatteryhasleakedontheremotecontrol,carefullywipethecasecleanandinstallnewbatteries. ● Riskofanexplosionifbatteryisreplacedbyanincorrecttype. ● Disposeofusedbatteriesaccordingtotheinstructions.

Presstheliddownwardandslideit.

Openthebatterycompartmentlid.

Installnewbatteriesintothecompartment.

Replacethecompartmentlid.

Two AAA size batteriesForcorrectpolarity(+and–),besurebatteryterminalsareincontactwithpinsincompartment.

1 � �

Point the remote control toward the projector (InfraredRemoteReceiver) when pressing the buttons.Maximumoperating range for the remote control is about 16.4'(5m)and60degreesinfrontoftheprojector.

Remote Control Operating Range

Remote Control Battery Installation

Projectionanglecanbeadjustedupto8.9degreeswiththeadjustablefeet.

Liftthefrontoftheprojectorandpullthefeetlocklatchesonbothsideoftheprojectorupward.

Releasethefeetlocklatchestolocktheadjustablefeetandrotatetheadjustablefeettoaproperheight,andtilt.

Keystonedistortion canbeadjustedautomaticallywith theAutosetupfunctionormanuallybyusingtheremotecontrolorthemenuoperation(seepages26,47-48).

AdjustableFeet FeetLockLatches

16.4'(5m)

30° Remotecontrol

30°

17

Positioning the ProjectorForprojectorpositioning,seethefiguresbelow.Theprojectorshouldbesetperpendicularlytotheplaneofthescreen.

Notes: •The brightness in the roomhas a great influence on picture quality. It is recommended to limit ambientlightinginordertoobtainthebestimage.

•Allmeasurementsareapproximateandmayvaryfromtheactualsizes.

Installation

Screen Size(W x H) mm

4 : 3 aspect ratio

Zoom (min)

40”

Zoom (max)

813 x 610

4.9’ (1.5m)

3.0’ (0.9m)

100”

2032 x 1524

12.5’ (3.8 m)

7.9’ (2.4 m)

150”

3048 x 2286

18.7’ (5.7 m)

11.8’ (3.6 m)

200”

4064 x 3048

24.9’ (7.6 m)

15.7’ (4.8 m)

300”

6096 x 4572

37.4’(11.4m)

23.6’ (7.2 m)

100"

150"

200"

300"

300"

189"

126"

95"

64"40"

A3.0’ (0.9 m)

7.9’ (2.4 m)

11.8’ (3.6 m)

15.7’ (4.8 m)

37.4’ (11.4 m)A：B ＝ 9 ：1

B

Max. Zoom

Min. Zoom

23.6’ (7.2 m)

18

Installation

Connecting the AC Power CordThis projector uses nominal input voltages of 100-120Vor 200–240VACand it automatically selects the correctinputvoltage.Itisdesignedtoworkwithsingle-phasepowersystems having a grounded neutral conductor.To reducetheriskofelectricalshock,donotplugintoanyothertypeofpowersystem.If you are not sure of the type of power being supplied,consultyourauthorizeddealerorservicestation.Connect theprojectorwith all peripheral equipment beforeturningtheprojectoron.

CAUTION

TheACoutletmustbenear thisequipmentandmustbeeasilyaccessible.

Notes: Unplug theACpower cordwhen theprojector is not inuse.WhenthisprojectorisconnectedtoanoutletwiththeACpower cord, it is inStand-bymodeand consumesalittleelectricpower.

TotheACoutlet.(�00 - ��0 V AC)

NOTE ON THE POwER CORDACpowercordmustmeetrequirementofthecountrywhereyouusetheprojector.ConfirmtheACplugtypewiththechartbelowandproperACpowercordmustbeused.IfsuppliedACpowercorddoesnotmatchyourACoutlet,contactyoursalesdealer.

Topowercordconnectoronyourprojector.

Projector side AC outlet side

Ground

TotheACoutlet.(1�0 V AC)

For the U .S .A . and Canada

TotheACoutlet.(�00 - ��0 V AC)

For the U .K .For Continental Europe

ConnecttheACpowercord(supplied)totheprojector.

19

Installation

Connecting to a Computer

SD

KB3AC

Cables used for connection •VGACable(MiniD-sub15pin)*•DVI-VGACable•DVICable•USBCable•AudioCables(*Onecableissupplied;othercablesarenotsuppliedwiththeprojector.)

ExternalAudioEquipment

DVI-VGAcable

USBcable

Audiocable(stereo)

USBportAudioOutput

USB

COMPUTER/COMPONENTAUDIOIN

AUDIOOUT(stereo)

AudioInput

COMPUTERIN1DVI-I

Notes: •Input sound to theCOMPUTER/COMPONENTAUDIOIN

terminalwhen using theCOMPUTER IN 1/DVI-I and theCOMPUTERIN2/COMPONENTINterminalasinput.

•When theAUDIOOUT is plugged-in, theprojector's built-inspeakerisnotavailable.

•USBcableconnectionisneededwhenoperatingthecomputerwiththeremotecontrolorusingthePAGE▲▼buttonsontheremotecontrol.

MonitorOutput

COMPUTERIN2/COMPONENT

VGAcable

MONITOROUT

Audiocable(stereo)

Unplug the power cords of both theprojector and external equipmentfrom theACoutletbeforeconnectingcables.

VGAcable

MonitorOutput

MonitorInput

DVIcable

MonitorOutput

�0

Installation

Connecting to Video Equipment

Cables used for connection •VideoandAudioCable(RCAx3)•S-VIDEOCable•AudioCable(Cablesarenotsuppliedwiththeprojector.)


Unplug the power cords ofboth the projector and externalequipment from the AC outletbeforeconnectingcables.

Notes: •WhentheAUDIOOUTisplugged-in,theprojector'sbuilt-inspeakerisnotavailable.

•The S-VIDEO jack connection overrides the VIDEOjackconnectionwhenselectingAUTOintheInputMenu(p.40).

SD

KB3AC

AUDIO OUT(stereo)

S-videocableVideoandaudiocable

VIDEO S-VIDEOAUDIOIN

CompositeVideoandAudioOutput S-videoOutput

(R)(L)(Video)

Audiocable(stereo)

AudioInput

�1

Installation

Connecting to Component Video Equipment


COMPUTER/COMPONENTAUDIOIN

Audiocable(stereo)

Audiocable(stereo)

AudioInput

ComponentVideoOutput(Y,Pb/Cb,Pr/Cr)

RGBScart21-pinOutput AudioOutput

Componentcable

COMPUTERIN2/COMPONENTIN

Notes: •When theAUDIOOUT is plugged-in, the projector'sbuilt-inspeakerisnotavailable.

•Seepage73fororderingoptionalcables.•RGBScartsignalcannotbeoutputfromtheMONITOROUTterminal.

Unplug the power cords ofboth the projector and externalequipment from the AC outletbeforeconnectingcables.

SD

KB3AC

AUDIOOUT(stereo)

Scart-VGAcable

Component-VGAcable

Cables used for connection•AudioCables•Scart-VGACable •ComponentCable•Component-VGACable(Cablesarenotsuppliedwiththisprojector.)

��

16

Thepreparationdisplaywilldisappearafter30seconds.

(Seepage53forLampcontrolstatus.)

Lampcontrolstatus

Turning On the Projector

Connect the projector’sAC power cord into anACoutlet.ThePOWERindicatorlightsred. Openthelenscap(seepages10,60).

Press thePOWERON/SYAND-BYbutton on the topcontrolorontheremotecontrol.ThePOWERindicatorlightsgreenandthecoolingfansstart tooperate.Thepreparation display appears on the screen and thecountdownstarts.

�

�

1

� Afterthecountdown,theinputsourcethatwasselectedthelasttimeandthelampcontrolstatusicon(seepage53)appearonthescreen.

If the projector is lockedwith aPIN code,PIN codeinput dialog boxwill appear. Enter thePIN code asinstructedbelow.

Complete peripheral connections (with a computer,VCR,etc.)beforeturningontheprojector.

what is PIN code?PIN (Personal IdentificationNumber) code is a securitycode that allows the personwho knows it to operate theprojector.SettingaPINcodepreventsunauthorizeduseoftheprojector.

APINcodeconsistsofafour-digitnumber.RefertothePINcodelockfunction intheSettingMenuonpages54–55forlockingoperationoftheprojectorwithyourPINcode.

Enter a PIN codeUse thePoint▲▼buttons to enter a number. Press thePoint►button to fix thenumber andmove the red framepointertothenextbox.Thenumberchangesto“.”Ifyoufixedan incorrectnumber,use thePoint◄button tomovethe pointer to the number youwant to correct, and thenenterthecorrectnumber.

Repeatthissteptocompleteenteringafour-digitnumber.

After entering the four-digit number,move the pointer to“Set.” Press theSELECT button so that you can start tooperatetheprojector.

If you entered an incorrectPIN code, “PIN code” and thenumber () will turn red for amoment. Enter thecorrectPINcodealloveragain.

CAUTION ON HANDLING PIN CODEIfyouforgetyourPINcode,theprojectorcannolongerbestarted.Takeaspecial care in settinga newPIN code; write down the number in acolumn on page 76 of thismanual and keep itat hand. Should the PINcode bemissing orforgotten,consultyourdealerorservicecenter.

Selected Input Source and Lamp Control

AftertheOKicondisappears,youcanoperatetheprojector.

PIN Code Input Dialog Box

Notes: •When the Logo select function is set to“Off,” the logo will not be shown on thescreen(p.50).

•When the “Countdown off” or “Off” isselected in the Display function, thecountdownwillnotbeshownonthescreen(p.48).

•Duringthecountdownperiod,alloperationsareinvalid.

•IfthePINcodenumberisnotenteredwithinthreeminutesafterthePINcodedialogboxappeared, the projector will be turned offautomatically.

•The “1234” issetas the initialPINcodeatthefactory.

•When the Input Search function is set to“On2”, the input signal will be searchedautomatically(p.51)

Note: •TheFilterwarning and Lamp replacementiconsmayappearonthescreendependingontheusagestateoftheprojector.

Basic Operation

��

TOMAINTAINTHE LIFEOFTHE LAMP,ONCEYOUTURNTHEPROJECTORON,WAITAT LEAST FIVEMINUTESBEFORETURNINGITOFF.

“Poweroff?”disappearsafter4seconds.

Turning Off the ProjectorPress thePOWERON/STAND-BYbutton on the topcontrol or on the remote control, and “Power off?”appearsonthescreen.

PressthePOWERON/STAND-BYbuttonagaintoturnoff theprojector.ThePOWER indicator starts toblinkred,andthecoolingfanskeeprunning.(Youcanselectthe level of fans’ quietnessand speed.See “Fan” onpage56.)At this time, you canunplug theACpowercordevenifthefansarestillrunning.

1

�

� When the projector has cooled down enough, thePOWER indicator stopsblinkingand you can turn ontheprojector.

Notes: •WhentheOnstartfunctionissetto“On,”theprojectorwillbe turned on automatically by connecting theAC powercordtoanACoutlet(p.53).

•Therunningspeedofcoolingfansischangedaccordingtothetemperatureinsidetheprojector.

•Donot put the projector in a casebefore the projector iscooledenough.

•IftheWARNINGindicatorblinksorlightsred,see“WarningIndicators”onpage58.

•While thePOWER indicator is blinking, the lamp is beingcooleddownand theprojector cannot be turnedon.Waituntil the POWER indicator stops blinking to turn on theprojectoragain.

•ThefanrotationwillterminatedirectlyiftheACpowercordisunpluggedimmediatelyaftertheprojectoristurnedoff.

•TheprojectorcanbeturnedonafterthePOWERindicatorturns red. Thewaiting time to restart will be shortenedwhen the normal power-off processing for fan cooling is

completed, comparedwith the time theACpower cord isimmediatelyunpluggedafterthepower-off.

Basic Operation

DONOTOPERATETHEPROJECTORCONTINUOUSLYWITHOUTREST. CONTINUOUSUSEMAYRESULTIN SHORTENINGTHE LAMP LIFE. TURNOFFTHEPROJECTORANDLETSTANDFORABOUTANHOURINEVERY24HOURS.

��

Basic Operation

How to Operate the On-Screen MenuThe projector can be adjusted or set via theOn-ScreenMenu.Foreachadjustmentandsettingprocedure, refer totherespectivesectionsinthismanual.

UsethePoint◄►buttonstoselectaMenuicon.UsethePoint▲▼buttonstoselectanitemintheselectedmenu.

Press theSELECTbutton toshowthe itemdata.UsethePoint◄►buttonstoadjustthevalues.

ToclosetheOn-ScreenMenu,presstheMENUbuttonagain.

Press theMENU button on the top control or theremotecontroltodisplaytheOn-ScreenMenu.

Note: •TheselecteditemisnotactiveuntiltheSELECTbuttonispressed.

1�

�

Menu bar Pointer(red frame)

Menu icon

Item dataPressthePoint◄►buttonstoadjustthevalue.

SELECT button

Pointer (red frame)PressthePoint▲▼buttonstomovethepointer.

Item

On-Screen Menu

QuitExitthismenu.

Top Control

MENU button

SELECT button

POINT buttons

MENU button

POINT buttons

Remote Control

SELECT button

PresstheSELECTbuttonheretodisplaypreviousitems.

PresstheSELECTbuttonheretodisplaynextitems.

�5

Menu Bar

PC System Menu

Image Adjust MenuUsed to adjust computerimage [Contrast/Brightness/Color temp./White balance(R/G/B)/Sharpness/Gamma](pp.37–38).

Setting Menu

Used to adjustthe volume ormute the sound(p.27).

Image Select MenuUsedtoselectanimagemodeamongDynamic,Standard,Real,Blackboard(Green),andImage1–4(p.36).

For computer source

AV System MenuUsedtoselectsystemofselectedvideosource(p.42).

Image Adjust MenuUsed to adjust picture image[Contrast/Brightness/Color/Tint/Color temp./White balance (R/G/B)/Sharpness/Gamma/ Noisereduction/Progressive](pp.44–45).

For video source

Samefunctionascomputermenu.

Input MenuUsedtoselectaninputsourceeitherVideoorComputer(pp.40,41).

PC Adjust MenuUsedtoadjustparameterstomatchwithinputsignalformat(pp.33–35).

Image Select MenuUsedtoselectanimagemodeamong Dynamic,Standard,Cinema, Blackboard(Green)andImage1–4(p.43).

Screen MenuUsed to set size ofimage[Normal/Wide/Custom](pp.46,47).

Guide windowShowtheselectedMenuoftheOn-ScreenMenu.

Same function asmenuforcomputersource.

Input MenuUsed to select aninput source eitherComputerorVideo.(pp.30-31).

Screen MenuUsed to adjust sizeoftheimage[Normal/T r u e / W i d e / F u l l /Custom/Digital zoom+/–](pp.38–39).

Fordetailedfunctionsofeachmenu,see“MenuTree”onpages67-68.

Sound MenuSeeowner’smanual“NetworkSet-upandOperation”.

wired Menu

Basic Operation

Usedtosettheprojector’soperatingconfigurations(pp.47-57).

Seeowner’smanual“NetworkSet-upandOperation”.

wireless MenuUsedtoselectcomputersystem(p.32).

�6

Basic Operation

RotatetheZoomLevertozoominandout.RotatetheFocusRingtoadjustthefocusoftheimage.

Zoom and Focus Adjustment

ZoomLever

FocusRing

If a projected picture still has keystone distortion afterpressingtheAUTOSETUP/CANCELbuttononthetopcontrolor theAUTOSET/CANCEL button on the remote control,correcttheimagemanuallyasfollows:

Press the KEYSTONE button on the remote control. TheKeystonedialogboxappears.Use thePoint▲▼buttons tocorrectkeystonedistortion.Thekeystoneadjustmentcanbestored(p.48).

ReducetheupperwidthwiththePoint▲button.

ReducethelowerwidthwiththePoint▼button.

•Thewhitearrowsindicatethatthereisnocorrection.•Aredarrowindicatesthedirectionofcorrection.•Anarrowdisappearsatthemaximumcorrection.•If you press theKEYSTONEbutton on the remotecontrol oncemorewhile the keystonedialog box isbeing displayed, the keystone adjustment will becanceled.

•The adjustable range is limited depending on theinputsignal.

Keystone Correction

Top Control

AUTO SETUP/CANCEL button

POINT▲▼buttons

Remote Control

Auto setup function is provided to automatically correctKeystonedistortionaccordingtotheprojector’stiltandadjustthecomputerdisplayparameters(Finesync,Totaldots,andPictureposition)byjustpressingtheAUTOSETUP/CANCELbuttonon the topcontrolor theAUTOSET/CANCELbuttonon the remote control. The operational setup for theAutosetupcanbechangedintheSettingmenu.Refertopage47forthesettingoftheAutosetupfunction.Notes: •AutoKeystonecorrectsverticaldistortiononly;itdoesnotcorrecthorizontaldistortion.

•AutoKeystonecannotworkwhenCeilingfeatureissetto“On”intheSettingmenu(p.51).

•Perfect correction of the image distortion cannot beensuredwith theAuto setup function. If the distortioncannot be corrected properly by pressing theAUTOSETUP/CANCELorAUTOSET/CANCELbutton, adjustmanuallybypressing theKEYSTONEbuttonon the top control or on theremotecontrolorselectingKeystoneintheSettingmenu(p.48).

•Fine sync,Total dots,Horizontal andVertical positionofsome computers cannot be fully adjustedwith theAutoPCAdjustmentfunction.Whentheimageisnotprovidedproperly with this operation,manual adjustments arerequired(pp.34–35).

AUTO SET/CANCEL button

Auto Setup Function

POINT▲▼buttons

KEySTONE button

�7

Sound Adjustment

1

�

PresstheMENUbuttontodisplaytheOn-ScreenMenu.UsethePoint◄►buttonstomovetheredframepointertotheSoundMenuicon.

PresstheVOLUME+/–buttonsonthetopcontrolorontheremotecontroltoadjustthevolume.Thevolumedialogboxappearsonthescreenforafewseconds.

PresstheMUTEbuttonontheremotecontroltotemporarilyturn off the sound.To turn the sound back on, press theMUTEbuttonagainorpresstheVOLUME+/–buttons.TheMutefunctionisalsoeffectivefortheAUDIOOUTjack.

PressthePoint◄►buttonstoswitchthemutefunctionOn/Off.Whenthesoundisturnedoff,“On” isdisplayed.PresstheVOLUME+/–buttonsagaintoturnthesoundbackon.

Use the Point▲▼ buttons tomove the red framepointertothedesireditem,andthenpresstheSELECTbutton.

Volume

Volume

Mute

PresstheVOL+buttontoturnupthevolume;presstheVOL-buttontoturndownthevolume.

Mute

Direct Operation

Menu Operation

Approximatelevelofthevolume.

ExittheSoundMenu.

Approximatelevelofthevolume.

PresstheMUTEbuttontosettheMutefunctionOnorOff.Thedialogboxdisappearsafter4seconds.

Sound Menu

SoundMenuicon

Volume Dialog Box

Remote Control

VOL+ (►)button

VOL- (◄)button

MUTE button

Top ControlVOLUME+/- buttons

Basic Operation

POINT▲button

POINT▼button

�8

Basic Operation

Remote Control OperationUsing the remote control for some frequently usedoperations is advisable. Just pressingoneof thebuttonsenablesyoutomakethedesiredoperationquicklywithoutcallinguptheOn-ScreenMenu.

Press theCOMPUTER,VIDEO, orNETWORKbutton ontheremotecontroltoselecttheinputsource.Seepages30-31,40-41fordetails.Refertotheowner'smanual"NetworkSet-upandOperation"fordetailsaboutthenetworkinput.

COMPUTER/VIDEO/NETwORK button

Press theFREEZEbuttonon the remote control to freezethe picture on the screen.To cancel theFreeze function,presstheFREEZEbuttonagainorpressanyotherbutton.

FREEZE button

PresstheAUTOPCbuttonontheremotecontroltooperatetheAutoPCAdj.function.Thecomputerscreenadjustmentcanbedoneeasilybypressingthisbutton.Seepage33fordetails.

AUTO PC button

PresstheD.ZOOMbuttonsontheremotecontroltoentertotheDigitalzoom+/–mode.Seepage39fordetails.

D .ZOOM buttons

Remote Control

D .ZOOM buttons

AUTO PC button

LAMP CONTROL button

Note: •Seethenextpageforthedescriptionofother

buttons.LAMP CONTROL buttonPress theLAMPCONTROLbuttonon the remote controlto select the lampmode for changing thebrightnesson thescreen.

Auto........... Thebrightnessaccordingtotheinputsignal(betweenHighandEcomode).

High........... BrighterthantheNormalmode.Normal....... NormalbrightnessEco............ Lowerbrightness reduces the lamppower

consumptionandextendsthelamplife.

COMPUTERbutton

FREEZE button

POINT ▲▼buttons

IMAGE button

NO SHOw button

P-TIMER button

NETwORKbutton

VIDEO button

�9

Basic Operation

blackoutthecapturedimagenormal•••••

PresstheNOSHOWbuttonontheremotecontroltoblackoutthe image.To restore to normal, press theNOSHOWbuttonagain or press any other button.When a projected image iscaptured and set as “User” in the Logo selection (p.49), thescreenchangeseachtimeyoupresstheNOSHOWbuttonasfollows.

NO SHOw button

PresstheP-TIMERbuttonontheremotecontrol.TheP-Timerdisplay “00:00” appears on the screen and the countdownstarts(00:00–59:59).To stop the countdown, press theP-TIMERbutton.To canceltheP-Timerfunction,presstheP-TIMERbuttonagain.

P-TIMER button

Press the IMAGE button on the remote control to select adesired imagemode of the screen. See pages 36, 43 fordetails.

IMAGE button

“Noshow”disappearsafter4seconds.

P-Timerdisplay

Note: •Seethepreviouspageforthedescriptionof

otherbuttons.

IMAGE button

NO SHOw button

P-TIMER button

�0

Choose either Computer 1 (Analog) or Computer 2 bypressing the INPUTbuttonon the top control or press theCOMPUTERbuttonontheremotecontrol.Beforeusing thesebuttons,correct inputsourceshouldbeselectedthroughMenuoperationasdescribedbelow.

Press theMENU button to display the On-ScreenMenu. Use the Point◄► buttons tomove the redframepointertotheInputMenuicon.

1 Input Menu

Use the Point▲▼ buttons tomove the red arrowpointer toeitherComputer1 (Analog)orComputer2,andthenpresstheSELECTbutton.

�

When selecting Computer 1 (Analog), RGB inputsourcewillbeselecteddirectly.WhenselectingComputer2, theSourceSelectMenuappears.MovethepointertoRGBandthenpresstheSELECTbutton.

�

Computer 1 (Analog)

Video

Computer �

Input Source Selection (RGB: Computer 1 (Analog)/Computer � )

Computer Input

Move the pointer (redarrow) to Computer 1(Analog)andpress theSELECTbutton.

InputMenuicon

COMPUTER button

Notes: •WiredandWirelessare for theNetwork function.Seeowner’smanual“NetworkSet-upandOperation”.

•WhentheInputSearchfunctionissetto“On1”or“On2”,theinputsignalwillbesearchedautomatically(p.51).

Move the pointer(redarrow)toRGB.

Move the pointer (redarrow) to Computer 2andpresstheSELECTbutton.

InputMenuicon

Computer �

wired

Top Control INPUT button

Computer 1 (Digital)

Remote Control

Computer 1 (Analog)

Computer �


Direct Operation

Menu Operation

Input Menu

wireless

�1

Computer Input

ChooseComputer 1(Digital) bypressing the INPUTbuttonon the topcontrol or press theCOMPUTERbuttonon theremotecontrol.Beforeusing thesebuttons,correct inputsourceshouldbeselectedthroughMenuoperationasdescribedbelow.

PresstheMENUbuttontodisplaytheOn-ScreenMenu.Use the Point◄► buttons tomove the red framepointertotheInputMenuicon.

1

Input MenuUse the Point▲▼ buttons to move the red arrowpointer to Computer 1 (Digital), and then press theSELECTbutton.

�

AftertheSourceSelectMenuappearedforComputer1(Digital),movethepointer toRGB(PCdigital)orRGB(AVHDCP),andthenpresstheSELECTbutton.

�

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Movethepointer(redarrow)toComputer1(Digital)andpresstheSELECTbutton.

InputMenuicon

Move thepointer tothe source that youwant to select andpress the SELECTbutton.

Computer 1

Computer 1 (Analog)

Video

Computer �

COMPUTER button

wired



Remote Control

Computer 1 (Analog)

Computer �


Direct Operation

Menu Operation

Notes: •HDCP (High-bandwidthDigitalContentProtection) isa system for protectingdigital entertainment contentdeliveredbyDVI (DigitalVisual Interface) frombeingcopied.The specification ofHDCP is decided andcontrolledbyDigitalContentProtection,LLC.Shouldthespecificationbechanged,thisprojectormaynotdisplaythedigitalcontentprotectedbyHDCP.

•WiredandWirelessare for theNetwork function.Seeowner’smanual“NetworkSet-upandOperation”.


wireless

��

Computer Input

TheAutoPCAdjustmentfunctionoperatestoadjusttheprojector.

PC System Menu

ThePCSystemMenuicon Selectedsystemis displayed.

Systemsinthisdialogboxcanbeselected.

PC System Menu

CustomizedMode(1–5)setinthePCAdjustMenu(pp.34–35).

Computer System SelectionThisprojectorautomatically tunestovarioustypesofcomputersbasedonVGA,SVGA,XGA,SXGA,WXGA,orUXGAwithitsMulti-scansystemandAutoPCAdjustment.Ifacomputerisselectedasasignalsource,thisprojector automatically detects the signal format and tunes to project a proper imagewithout any additionalsettings.(Signalformatsprovidedinthisprojectorareshownonpages70-71.)

Oneofthefollowingmessagesmayappearwhen:

The projector cannot recognize the connectedsignal conforming to theprovidedPCSystems.The “Auto” is displayed on the SystemMenuboxandtheAutoPCAdjustmentfunctionworksto display proper images. If the image is notprojected properly, a manual adjustment isrequired(pp.34-35).

There is no signal input from the computer.Check the connection between your computerand the projector. (See “Troubleshooting” onpage63.)

Auto

-----

The preset system ismanually adjusted in thePCAdjust Menu. The adjusted data can bestoredinMode1–5(pp.34-35).

Mode 1

PCSystemsprovidedinthisprojectorischosen.Theprojectorchoosesapropersystemprovidedintheprojectoranddisplaysit.

SVGA 1

*Mode1andSVGA1areexamples.

PresstheMENUbuttontodisplaytheOn-ScreenMenu.UsethePoint◄►buttonstomovetheredframepointertothePCSystemMenuicon.

UsethePoint▲▼buttonstomovetheredarrowpointerto the desired system and then press the SELECTbutton.

1

�

PCsystemcanalsobeselectedmanually.Selecting Computer System Manually

��

Computer Input

AutoPCAdjustmentfunctionisprovidedtoautomaticallyadjustFinesync,Totaldots,HorizontalandVerticalpositionstoconformtoyourcomputer.

MovetheredframepointertoAutoPCAdj.andpresstheSELECTbutton.

“Pleasewait...”appearswhiletheAutoPCadjustmentisinprocess.

PC Adjust Menu

PCAdjustMenuicon

Auto PC Adjustment

Remote Control

AUTO PC button

TheAutoPCadjustment function canbeoperateddirectlybypressingtheAUTOPCbuttonontheremotecontrol.

Direct Operation

To store adjustment parametersTheadjustedparametersfromtheAutoPCAdjustmentcanbestoredintheprojector.Oncetheparametersarestored,thesettingcanbedonejustbyselectingaMode(1–5)inthePCSystemMenu(p.32).Seealso“Store”onpage35.

Notes: •Finesync,Totaldots,HorizontalandVerticalpositionofsomecomputerscannotbe fullyadjustedwith theAutoPCAdjustmentfunction.Whentheimageisnotprovidedproperlywith this operation,manual adjustments arerequired(pp.34–35).

•TheAutoPCAdjustmentcannotbeoperatedwhen480i,575i,480p,575p,720p,1035i,or1080iisselectedinthePCSystemMenu (p.32), orwhen thesignal is comingfromtheDVI-terminal.

PresstheMENUbuttontodisplaytheOn-ScreenMenu.UsethePoint◄►buttonstomovetheredframepointertothePCAdjustMenuicon.

1

� UsethePoint▲▼buttonstomovetheredframepointertoAutoPCAdj.andthenpresstheSELECTbuttontwice.

Auto PC Adj .

Menu Operation

��

Computer Input

PC Adjust Menu

Manual PC AdjustmentSomecomputersemployspecialsignalformatswhichmaynotbetunedbyMulti-scansystemofthisprojector.ManualPCAdjustmentenablesyoutopreciselyadjustseveralparameterstomatchthosesignalformats.Theprojector has five independentmemory areas to store thoseparametersmanually adjusted. It allows you torecallthesettingforaspecificcomputer.

Press theMENU button to display the On-ScreenMenu. Use the Point◄► buttons tomove the redframepointertothePCAdjustMenuicon.

1

� Use the Point▲▼ buttons tomove the red framepointertothedesireditemandthenpresstheSELECTbutton to display the adjustment dialog box.Use thePoint◄►buttonstoadjustthesettingvalue.

Move the red frame pointertothedesireditemandpresstheSELECTbutton.

PCAdjustMenuicon

PresstheSELECTbuttonheretoadjustotheritems.

UsethePoint◄►buttonstoadjustthevalue.

Status(Stored/Free)oftheselectedMode.

SelectedMode

Press theSELECTbuttonatCurrent mode to show theinformationof theconnectedcomputer.

UsethePoint◄►buttonstoadjust thevalue,eliminatingaflickerfromtheimagedisplayed(from0to31).

Fine sync

UsethePoint◄►buttonstoadjustthenumberoftotaldotsinonehorizontalperiodtomatchyourPCimage.

Total dots

Use thePoint◄►buttons to adjust the horizontal pictureposition.

Horizontal

Use the Point◄► buttons to adjust the vertical pictureposition.

Vertical

PresstheSELECTbuttontoshowH-syncfreq.andV-syncfreq.oftheconnectedcomputer.

Current mode

UsethePoint◄►buttonstoadjust theclamplevel.Whentheimagehasdarkbars,trythisadjustment.

Clamp

�5

Computer Input

Vacant Values of “Total dots”,“Horizontal”,“Vertical”,“Display area H”, and“DisplayareaV”.

Closethisdialogbox.

To store adjusted data

To clear adjusted dataThisModehasstoredparameters.

Movetheredframepointerto the desired item andpresstheSELECTbutton.

UsethePoint◄►buttonstoadjustthehorizontalareadisplayedbythisprojector.

Display area H

UsethePoint◄►buttonstoadjusttheverticalareadisplayedbythisprojector.

Display area V

Reset

Store

ExitthePCAdjustMenu.

Quit

Tostoretheadjusteddata,selectStoreandthenpresstheSELECTbutton.Move the redarrowpointer to oneof theModes1to5inwhichyouwanttostore,andthenpresstheSELECTbutton.

To reset the adjusted data, select Reset and press theSELECTbutton.Aconfirmationboxappearsandthenselect[Yes].Alladjustmentswillreturntotheirpreviousfigures.

Mode freeTo clear the storeddata, selectMode freeand thenpresstheSELECTbutton.MovetheredarrowpointertotheModethatyouwanttoclearandthenpresstheSELECTbutton.

Notes: •Displayarea (H/V)cannotbeselectedwhen480i,575i,480p,575p,720p,1035i,or1080i isselected in thePCSystemMenu(p.32).

•PCAdjustMenu cannot be selectedwhenComputer1(Digital)isselectedintheInputMenu(p.31).

�6

Computer Input

Move the red frame pointer tothe desired imagemode andpresstheSELECTbutton.

Theselectedimagemodeischeckmarked.

Image Select Menu

Normalpicturemodepresetontheprojector.

Standard

Picturemodewithimprovedhalftoneforgraphics.

Real

For the image projected on a blackboard. See above forfurtherdescription.

Blackboard(Green)

ImageSelectMenuicon

IMAGE button

Dynamic

Real

Image 1

Image �

Image �

Image Mode Selection

Image �

Forviewingwith theuserpreset imagemode in the ImageAdjustMenu(pp.37-38).

Image 1~�

Blackboard(Green)

Forviewingpicturesinabrightroom.

Dynamic

Standard

Remote Control

IMAGE button

Select the desired imagemode from among Dynamic,Standard, Real, Blackboard (Green), Image 1, Image 2,Image3,andImage4bypressingtheIMAGEbuttonontheremotecontrol.

Standard

Picturemodewithimprovedhalftoneforgraphics.Real

Blackboard (Green)

Image 1–�

Fortheimageprojectedonablackboard.This mode help enhance the image projected on ablackboard. This ismainly effective on a green coloredboard,nottrulyeffectiveonablackcoloredboard.

Dynamic

Direct Operation



Forviewingwith theuserpreset imagemode in the ImageAdjustMenu(pp.37-38).ThisImagememoryisprovidedineachcomputer,component,andvideoinputsource.

Press theMENU button to display the On-ScreenMenu. Use the Point◄► buttons tomove the redframepointertotheImageSelectMenuicon.

1

� Use the Point▲▼ buttons tomove the red framepointertothedesiredimagemodeandthenpresstheSELECTbutton.

Menu Operation

�7

Computer Input

UsethePoint◄►buttonstoadjustthesettingvalue.

MovetheredframepointertothedesireditemandthenpresstheSELECTbutton.

Image Adjust Menu

ImageAdjustMenuicon

SelectedImagemode

Image Adjustment

Reset

PresstheMENUbuttontodisplaytheOn-ScreenMenu.UsethePoint◄►buttonstomovetheredframepointertotheImageAdjustMenuicon.

1

� UsethePoint▲▼buttonstomovetheredframepointertothedesireditemandthenpresstheSELECTbuttontodisplaytheadjustmentdialogbox.UsethePoint◄►buttonstoadjustthesettingvalue.

Note: •WhentheWhitebalanceRed,Green,orBlueisadjusted,theColortemp.levelwillchangeto“Adj.”.

PressthePoint◄buttontodecreasethecontrast;pressthePoint►buttontoincreasethecontrast(from0to63).

PressthePoint◄buttontodecreasethebrightness;pressthePoint►buttontoincreasethebrightness(from0to63).

Contrast

Brightness

PressthePoint◄buttontolightenredtone;pressthePoint►buttontodeepenredtone(from0to63).

white balance (Red)

PressthePoint◄buttontolightengreentone;pressthePoint►buttontodeepengreentone(from0to63).

white balance (Green)

PressthePoint◄buttontolightenbluetone;pressthePoint►buttontodeepenbluetone(from0to63).

white balance (Blue)

UsethePoint◄►buttonstoselectthedesiredColortemp.level(High,Mid,Low,orXLow).

Color temp .

UsethePoint◄►buttonstoadjustthegammavaluetoobtainabetterbalanceofcontrast(from0to15).

Gamma

PressthePoint◄buttontodecreasethesharpnessoftheimage;pressthePoint►buttontoincreasethesharpnessoftheimage(from0to15).

Sharpness

Toresettheadjusteddata,selectResetandpresstheSELECTbutton.Aconfirmationboxappearsandthenselect[Yes].Alladjustmentswillreturntotheirpreviousfigures.

�8

Computer Input

Store

ExittheImageAdjustMenu.

Quit

Storeicon

Tostoretheadjusteddata,selectStoreandpresstheSELECTbutton.UsethePoint▲▼buttonstoselectonefromImage1to4andpresstheSELECTbutton.Aconfirmationboxappearsandthenselect[Yes].Storeddatacanbecalledupbyselectingan“Image(1–4)”intheImageModeSelectiononpage36.

ImageModeMenuMove the red framepointer to an imageitem to be set andt h e n p r e s s t h eSELECTbutton.

A confirmationbox appearsand thenselect[Yes]

Thisprojectorhasthepicturescreenresizefunction,whichenablesyoutocustomizetheimagesize.

Screen Menu

Screen Size Adjustment

Providetheimagetofitthescreensize.

Normal

True

Provide the image in its original size.When the originalimagesize is larger thanthescreensize(1024x768), theprojectorenterstothepanningmodeautomatically.UsethePoint▲▼◄►buttonstopantheimage.Whenadjusted,thearrowswill turn red.Whenreached to thecorrection limits,thearrowswilldisappear.

Full

Providethefullscreenimage.

Notes: •TheScreenMenu, except for "Normal"and"Custom",cannotbeoperatedwhen720p(HDTV), 1035i (HDTV), or 1080i(HDTV) is selected in thePCSystemMenu(p.32).

•This projector cannot display anyresolution higher than 1600 x 1200. Ifyour computer’s screen resolution ishigherthanit,resettheresolutiontothelowerbeforeconnectingtotheprojector.

•Theimagedatainotherthan1024x768ismodifiedtofitthescreensizeininitialmode.

•True, Full, andDigital zoom+/– cannotbe selectedwhen 480i, 575i, 480p, or575pisselectedinthePCSystemMenu(p.32).

Press theMENU button to display the On-ScreenMenu. Use the Point◄► buttons tomove the redframepointertotheScreenMenuicon.

1

Use the Point▲▼ buttons tomove the red framepointer to the desired function and then press theSELECTbutton.

�

wide

Providetheimagetofitthewidevideoaspectratio(16:9)byexpanding the imagewidthuniformly.This function canbeusedforprovidingasqueezedvideosignalat16:9.

Move the red framepointer to the functionandpresstheSELECTbutton.

ScreenMenuicon

�9

Computer Input

SelectDigitalzoom+.TheOn-ScreenMenudisappearsand“D. zoom+”appears.Press theSELECTbutton toexpandthe image size.Use thePoint▲▼◄►buttons to pan theimage.ThePanningfunctioncanworkonlywhentheimageislargerthanthescreensize.A projected image can be also expanded by pressing theD.ZOOM+buttonontheremotecontrol.

ToexittheDigitalzoom+/–mode,pressanybuttonexcepttheD.ZOOM+/–buttons,SELECT,andPointbuttons.

Digital zoom +

SelectDigitalzoom–.TheOn-ScreenMenudisappearsand“D.zoom–”appears.PresstheSELECTbuttontocompressimagesize.TheprojectedimagecanbealsocompressedbypressingtheD.ZOOM–buttonontheremotecontrol.

Digital zoom –

To return to thepreviousscreensize, selectascreensizefrom theScreenSizeAdjustmentMenuor select an inputsource from the Input SourceSelectionMenu (pp.30-31)again, or adjust the screen size with the D.ZOOM +/–buttons.

For zooming in and out the images

Notes: •The panning functionmay not operateproperly if the storedMode in the PCAdjustMenuisused(p.35).

•MinimumcompressionratiocanbelimiteddependingontheinputsignalorwhentheKeystonefunctionisworking.

•True,Full , andDigital zoom+/–cannotbe selected when 480i, 575i, 480p, or575pisselectedinthePCSystemMenu(p.32).

•Digitalzoom+/-cannotbeselectedwhenFullorTrueisselected.

Remote Control

D.ZOOM + button

POINT ▲▼◄►buttons

SELECT button

D .ZOOM - button

Adjust the screen scale and positionmanuallywith thisfunction.Press theSELECTbuttonatCustomand the “Custom” isdisplayedon the screen for a few seconds and then theAspectdialogboxappears.

ScaleH/V.......... AdjusttheHorizontal/Verticalscreenscale. H&V................... When set to “On,” the aspect ratio is

fixed.The“ScaleV”appearsdimmedandbecomes unavailable.Adjust “Scale H,”then the screen scale is automaticallymodifiedbasedontheaspectratio.

PositionH/V....... Adjust the Horizontal/Vertical screenposition.

Common............ Save the adjusted scale to all the inputs.Press theSELECTbutton atCommon todisplay a confirmation box. To save thescale, press theSELECTbuttonat “Yes.”WhenCustomisselected,thesavedscaleisused.

Reset................. Reset the all adjusted values. Pressthe SELECT button at Reset to displaya confirmation box. To reset, press theSELECTbuttonat“Yes.”

Custom

Notes: •Whennosignalisdetected,“Normal”issetautomatically

andtheAspectdialogboxdisappears. •TheadjustablerangeforScaleH/VandPositionH/Vis

limiteddependingontheinputsignal.

PresstheSELECTbuttonatCommonorReset,todisplayaconfirmationbox.

�0

ChooseVideo by pressing the INPUT button on the topcontrolortheVIDEObuttonontheremotecontrol.Beforeusing thesebuttons,correct inputsourceshouldbeselectedthroughmenuoperationasdescribedbelow.

Use the Point▲▼ buttons tomove the red arrowpointertoVideoandthenpresstheSELECTbuttontodisplaytheSourceSelectMenu.

1

�

Move the pointer toVideoandpresstheSELECTbutton.

VIDEO

Movethepointertothesourcethat you want to select andpresstheSELECTbutton.

Source Select Menu (VIDEO)

Input Menu

MovethepointertothedesiredsourceandthenpresstheSELECTbutton.�

Input Source Selection (Video, S-video)

InputMenuicon

Video Input

Computer 1 (Analog)

Video

Computer �

INPUT button

VIDEO button

wired



Remote Control

Direct Operation

Menu OperationPress theMENU button to display the On-ScreenMenu. Use the Point◄► buttons tomove the redframepointertotheInputMenuicon.

WhenselectingAuto,theprojectorautomaticallydetects incoming video signal, and adjustsitself to optimize its performance.Theprojectorselectsconnectioninthefollowingorder:

1.S-video2.Video

Auto

WhenvideoinputsignalisconnectedtotheVIDEOjack,selectVideo.

Video

WhenvideoinputsignalisconnectedtotheS-VIDEOjack,selectS-video.

S-video

Notes: •WiredandWirelessare for theNetwork function.Seeowner’smanual“NetworkSet-upandOperation”.


wireless

�1

Video Input

ChooseComputer 2 bypressing the INPUTbuttonon thetopcontrolorpress theCOMPUTERbuttonon the remotecontrol.Beforeusing thesebuttons,correct inputsourceshouldbeselectedthroughMenuoperationasdescribedbelow.

1

Computer �

Input Menu

Use the Point▲▼ buttons tomove the red arrowpointer toComputer 2 and then press the SELECTbutton.

�

After theSourceSelectMenuappeared forComputer2,movethepointer toComponentorRGB(Scart)andthenpresstheSELECTbutton.

�

Input Source Selection (Component, RGB Scart �1-pin)

Move the pointer (redarrow) to Computer 2andpresstheSELECTbutton.

InputMenuicon

Move the po in ter toComponentorRGB(Scart)and press the SELECTbutton.

Source Select Menu

Whentheinputsourceiscomingfromvideoequipment connected to theCOMPUTERIN 2/COMPONENT IN terminal with aComponent-VGACable,selectComponent.

Component

Whentheinputsourceiscomingfromvideoequipment connected to theCOMPUTERIN2/COMPONENTINterminalwithaScart-VGACable,selectRGB(Scart).

RGB (Scart)

Computer 1 (Analog)

Video

Computer �

COMPUTER button

wired

INPUT button


Remote Control

Computer 1 (Analog)

Computer �


Direct Operation

Menu OperationPress theMENU button to display the On-ScreenMenu.UsethePoint◄►buttonstomovetheredframepointertotheInputMenuicon.

Top Control

Note: •Wired andWireless are for theNetwork function.Seeowner’smanual“NetworkSet-upandOperation”.


wireless

��

Video Input

Video System SelectionPresstheMENUbuttontodisplaytheOn-ScreenMenu.UsethePoint◄►buttonstomovetheredframepointertotheAVSystemMenuicon.

1

AV System Menu (Video or S-Video)

AV System Menu (Component)

UsethePoint▲▼buttonstomovetheredarrowpointertothedesiredsystemandthenpresstheSELECTbutton.

�

If the projector cannot reproduce proper video image,selectaspecificbroadcast signal format fromamongPAL,SECAM,NTSC,NTSC4.43,PAL-M,andPAL-N.

MovethepointertothedesiredsystemandpresstheSELECTbutton.

PAL/SECAM/NTSC/NTSC� .��/PAL-M/PAL-N

The projector automatically detects an incoming videosignal,andadjustsitselftooptimizeitsperformance.

Iftheprojectorcannotreproducepropervideoimage,selectaspecificcomponentvideosignalformatfromamong480i,575i,480p,575p,720p,1035i,and1080i.

Auto

COMPONENT VIDEO SIGNAL FORMAT

Video or S-Video

Component

The projector automatically detects an incoming videosystem,andadjustsitselftooptimizeitsperformance.WhenVideoSystemisPAL-MorPAL-N,select thesystemmanually.

Auto

AVSystemMenuiconTheselectedsystemisdisplayed.

MovethepointertothedesiredsystemandpresstheSELECTbutton.

AVSystemMenuicon Theselectedsystemis displayed.

Note: •TheAVSystemMenucannotbeselectedwhenselectingRGB(Scart).

��

Video Input

MovetheredframepointertothedesiredimagemodeandpresstheSELECTbutton.

Theselectedimagemodeischeckmarked.

Image Select Menu

Standard

Cinema

Blackboard(Green)

ForviewingwiththeuserpresetimagemodeintheImageAdjustMenu(pp.44–45).

Image1–�

ImageSelectMenuicon

Select the desired imagemode from among Dynamic,Standard,Cinema,Blackboard (Green), Image1, Image2,Image3,andImage4bypressingtheIMAGEbuttonontheremotecontrol.

Standard

Picturemodeadjustedwithfinetone.Cinema

Blackboard (Green)

Image 1–�

IMAGE button

Dynamic

Cinema

Image 1

Image �

Image �

Image �

Image Mode Selection

Fortheimageprojectedonablackboard.Thismodehelpenhancetheimageprojectedonablackboard.Thisismainlyeffectiveonagreencoloredboard,nottrulyeffectiveonablackcoloredboard.

Fortheimageprojectedonablackboard.Seeaboveforfurtherdescription.

Blackboard (Green)

Dynamic

Dynamic

Standard

Remote Control

IMAGE button

Direct Operation



Forviewingwith theuserpreset imagemode in the ImageAdjustMenu(pp44–45).ThisImagememoryisprovidedineachcomputer,component,andvideoinputsource.

PresstheMENUbuttontodisplaytheOn-ScreenMenu.UsethePoint◄►buttonstomovetheredframepointertotheImageSelectMenuicon.

1

� UsethePoint▲▼buttonstomovetheredframepointertothedesiredimagemodeandthenpresstheSELECTbutton.

Menu Operation



Picturemodeadjustedwithfinetone.

��

Video Input

Image AdjustmentPresstheMENUbuttontodisplaytheOn-ScreenMenu.UsethePoint◄►buttonstomovetheredframepointertotheImageAdjustMenuicon.

1

� Use the Point▲▼ buttons tomove the red framepointertothedesireditemandthenpresstheSELECTbutton to display the adjustment dialog box.Use thePoint◄►buttonstoadjustthesettingvalue.

PressthePoint◄buttontodecreasethecontrast;pressthePoint►buttontoincreasethecontrast(from0to63).

PressthePoint◄buttontodecreasethebrightness;pressthePoint►buttontoincreasethebrightness(from0to63).

Contrast

Brightness

PressthePoint◄buttontolightenredtone;pressthePoint►buttontodeepenredtone(from0to63).

white balance (Red)

Press thePoint◄button to lighten green tone; press thePoint►buttontodeepengreentone(from0to63).

white balance (Green)

Press thePoint◄ button to lighten blue tone; press thePoint►buttontodeepenbluetone(from0to63).

white balance (Blue)

UsethePoint◄►buttonstoselectthedesiredColortemp.level(High,Mid,Low,orXLow).

Color temp .

PressthePoint◄buttondecreasetheintensityofthecolor;press thePoint►button increase the intensityof the color(from0to63).

PressthePoint◄►buttonstoadjustthetintvaluetogetapropercolorbalance(from0to63).

Color

Tint

Notes: •WhentheWhitebalanceRed,Green,orBlueisadjusted,theColortemp.levelwillchangeto“Adj.”.

•TintcannotbeselectedwhenthevideosystemisPAL,SECAM,PAL-M,orPAL-N(p.42).

UsethePoint◄►buttonstoadjustthesettingvalue.

Move the red framepointer to thedesireditem and then presstheSELECTbutton.

Image Adjust Menu

ImageAdjustMenuicon

�5

Video Input

Use thePoint◄►buttons to adjust the gamma value toobtainabetterbalanceofcontrast(from0to15).

Gamma

PressthePoint◄buttontodecreasethesharpnessoftheimage;pressthePoint►buttonto increasethesharpnessoftheimage(from0to15).

Sharpness

An interlacedvideosignal canbedisplayed inprogressivemode.Selectoneofthefollowingoptions. Off.......... Disabled. L1.......... Foranactivepicture. L2.......... Forastillpicture. Film........ Forwatchingafilm.Withthisfunction,the

projectorreproducespicturesfaithfultotheoriginalfilmquality.

Progressive

Noise reduction

Noise interference on the screen can be reduced.Selectoneofthefollowingoptionstogetsmootherimages. Off.......... Disabled. L1.......... Lowerreduction L2.......... Higherreduction

Notes: •Noise reduction andProgressive cannot be selectedwhen480p,575p,720p,1035i,or1080iisselected(p.42).

•ResetandStoreiconswillbedisplayedwhenanyadjustmentismade.

To store the adjusted data, select Store and press theSELECTbutton.Use thePoint▲▼buttons to select onefromImage1to4andpresstheSELECTbutton.A confirmation box appears and then select [Yes]. Storeddatacanbecalledupbyselectingan “Image(1–4)” in theImageSelectMenuonpage43.

To reset the adjusted data, select Reset and press theSELECTbutton.Aconfirmationboxappearsandthenselect[Yes].Alladjustmentswillreturntotheirpreviousfigures.

Reset

Store

ExittheImageAdjustMenu.

Quit

ImageModeMenuMove the red framepointer to an imageitem to be set andt h e n p r e s s t h eSELECTbutton.Storeicon

A confirmation boxappears and thenselect[Yes].

�6

Video Input

Thisprojectorhasthepicturescreenresizefunction,whichenablesyoutocustomizetheimagesize.

Normal

Screen Size Adjustment

Screen MenuPress theMENU button to display the On-ScreenMenu. Use the Point◄► buttons tomove the redframepointertotheScreenMenuicon.

1

Use the Point▲▼ buttons tomove the red framepointer to the desired function and then press theSELECTbutton.

�

Providetheimageatthe4:3normalvideoaspectratio.

CustomAdjust the screen scale and positionmanually with thisfunction.Press theSELECTbutton atCustomand the "Custom" isdisplayed on the screen for a few seconds and then theAspectdialogboxappears. ScaleH/V.......... Adjust the Horizontal/Vertical screen

scale. H&V................... When set to "On", the aspect ratio is

fixed. The "Scale V" appears dimmedand becomes unavailable.Adjust the"Scale H", then the screen scale isautomatically modified based on theaspectratio.

Position H/V.....Adjust the Horizontal/Vertical screenposition.

Common............ Savetheadjustedscaletoalltheinputs.PresstheSELECTbuttonatCommontodisplay a confirmation box.To save thescale,presstheSELECTbuttonat"Yes",When Custom is selected, the savedscaleisused.

Reset................. Reset the all adjusted values. PresstheSELECTbutton atReset to displaya confirmation box.To reset, press theSELECTbuttonat"Yes".

Notes: •Whenno signal is detected, "Normal" isset automatically and theAspect dialogboxdisappears.

•Theadjustable range forScaleH/VandPositionH/V is limiteddependingon theinputsignal.

•"Wide" cannot be operatedwhen 720p,1035i, or 1080i is selected in theAVSystemMenu(p.42).

PresstheSELECTbuttonatCommonorReset,todisplayaconfirmationbox.

wide

Providetheimageatthe16:9widescreenratio.

ScreenMenuicon

Move the red framepointer to thedesired function and press theSELECTbutton.

�7

Language

The languageused in theOn-ScreenMenu is available inEnglish, German, French, Italian, Spanish, Portuguese,Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,Russian,Chinese,Korean,andJapanese.

Set the red framepointer to the itemand press theSELECTbutton.

PresstheSELECTbuttonat Language, then theLanguageMenuappears.

Setting Menu (Language)

SettingMenuicon

Setting

Setting

Auto setupThisfunctionenablesAutoKeystonecorrectionandAutoPCadjustment bypressing theAUTOSETUP/CANCELbuttononthetopcontrolortheAUTOSET/CANCELbuttonontheremote control.Settings for those functions canbealteredasfollows:Auto PC Adj . On. . . . . . .EnablesAuto PCAdjustment when pressing

theAUTOSET/CANCELbuttonon the remotecontrol or theAUTOSETUP/CANCEL buttononthetopcontrol.

Off. . . . . . .DisablesAutoPCAdjustment.

Auto Keystone Auto. . . . . Alwaysworksandcorrectskeystonedistortion

accordingtotheprojector'stilt. Manual. . .Works only when pressing theAUTO SET/

CANCELbutton on the remote control or theAUTO SETUP/CANCEL button on the topcontrol.

Off. . . . . . .DisablesAutoKeystone.Notes: •AutoPCAdj. andAutoKeystone cannot be set "Off" at the

sametime. •Auto Keystone corrects vertical distortion only, not correct

horizontaldistortion. •TheAutoKeystone cannotworkwhenCeiling feature is set

"On"intheSettingmenu(p.51). •Perfect correction of the imagedistortion cannot beensured

with theAuto setup function. If thedistortion is not correctedproperly by pressing theAUTOSETUP/CANCEL orAUTOSET/CANCEL button, adjust manually by pressing theKEYSTONEbuttononthe top control or on theremotecontrolorselectingKeystoneintheSettingmenu(pp.26,48).

•Fine sync, Total dots, Horizontal and Vertical position ofsome computers cannot be fully adjustedwith theAutoPCAdjustmentfunction.Whentheimageisnotprovidedproperlywith thisoperation,manualadjustmentsare required (pp.34–35).

Auto setup

SelectAuto setup and thisbox appears. Choose thedesired setting for Autokeystone andAutoPCadj.withthePoint◄►buttons.

Press theSELECTbuttonhere to display the otherlanguages.

Press theMENU button to display the On-ScreenMenu. Use the Point◄► buttons tomove the redframepointertotheSettingMenuicon.

1

� Use the Point▲▼ buttons tomove the red framepointertothedesireditemandthenpresstheSELECTbutton.TheSettingdialogboxappears.

ThisprojectorhasaSettingmenuthatallowsyoutosetuptheothervariousfunctionsdescribedbelow.

�8

Setting

Display

Blue backWhenthisfunctionis“On,”ablueimageisdisplayedwhiletheinputsignalisnotdetected.

KeystoneThis function is used to store or reset the keystonecorrectionwhen theACpower cord is unplugged.Use thePoint◄►buttonstoswitchbetweeneachoption. Store........ Keep the keystone correction evenwhen the

ACpowercordisunplugged. Reset....... ReleasethekeystonecorrectionwhentheAC

powercordisunplugged.

To correct keystone distortion, press theSELECTbutton.The “Keystone”appearson thescreen.Use thePoint▲▼buttonstocorrectkeystonedistortion(p.26).

Keystone

ThisfunctiondecideswhethertodisplayOn-ScreenDisplays. On............................ Showall theOn-Screendisplays.Use

this functionwhen youwant to projectimagesafter the lampbecomesbrightenough.Thefactorydefaultsettingisinthisoption.

CountdownOff......... Show the input image instead ofthe countdown when turning on theprojector.Use this functionwhen youwant to project the image as early aspossible even when the lamp is notbrightenough.

Off............................ HidetheOn-ScreenDisplaysexcept; ●On-ScreenMenu ●“Poweroff?”(p.23) ●“Nosignal”forPowermanagement

(p.52) ●“Pleasewait...” ●ArrowsfortheTruefunctioninthe

ScreenMenu(p.38)

UsethePoint◄►buttonstoswitchbetweentheoptions.

�9

Setting

Select[Yes]tocapturetheprojectedimage.

Select[Yes]tostopcapturing.

Capture

Logo (Logo and Logo PIN code lock settings)

Logo select

This functionallowsyou tocustomize thescreen logowithLogoselect,Capture,andLogoPINcodelockfunctions.

Note: •When “On” is selected in the Logo PIN code lockfunction, Logo select andCapture functions cannot beselected.

CaptureThis function enables you to capture an image beingprojectedtouse it forastarting-updisplayor intervalofpresentations.

SelectCaptureandpresstheSELECTbutton.Aconfirmationboxappearsandselect[Yes]tocapturetheprojectedimage.

Aftercapturingtheprojectedimage,gototheLogoselectfunctionandsetitto“User”.Thenthecapturedimagewillbedisplayed thenext time you turn on theprojector orwhenyoupresstheNOSHOWbutton(p.29).

TocanceltheCapturefunction,select[No].

Logo selectThis function decides on the starting-up display fromamongfollowingoptions. User......... Showtheimageyoucaptured Default..... Showthefactory-setlogo Off............ Showthecountdowndisplayonly

Notes: •Before capturing an image, select “Standard” inthe ImageSelectMenu to capture a proper image(pp.36,43).

•AsignalfromacomputercanbecaptureduptoXGA(1024x768).Asignal fromvideoequipmentcanbecapturedexceptfor720p,1035i,and1080i.

•When capturing the image that has been adjustedby the Keystone function, the adjusted data isautomatically reset and the projector captures animagewithoutkeystonecorrection.

•WhentheLogoPINcodelockfunctionissetto“On,”theCapturefunctioncannotbeselected.

•Whenstartingtocaptureanewimage,thepreviouslystoredimageisclearedevenifyoucancelthecapturing.

•Whenthere isnocaptured imageor it is interruptedwhilecapturingaimage,theCapturefunctioncannotbe selected, you can only switch betweenDefaultandOff.

50

Logo PIN code lock

Setting

This function prevents an unauthorized person fromchangingthescreenlogo.

Off............ ThescreenlogocanbechangedfreelyfromtheLogoMenu(p.49).

On............ ThescreenlogocannotbechangedwithoutaLogoPINcode.

If youwant to change the LogoPIN code lock setting,presstheSELECTbuttonandtheLogoPINcodedialogbox appears. Enter a LogoPIN code by following thestepsbelow.TheinitialLogoPINcodeissetto“4321”atthefactory.

Logo PIN code lock

Enter a Logo PIN codeUse thePoint▲▼buttons to enter a number.Press thePoint►buttontofixthenumberandmovetheredframepointertothenextbox.Thenumberchangesto“.”Ifyoufixedanincorrectnumber,usethePoint◄buttontomovethe pointer to the number youwant to correct, and thenenterthecorrectnumber.


After entering the four-digit number,move the pointer to“Set.”Press theSELECTbutton so that you can start tooperatetheprojector.

If you entered an incorrect LogoPIN code, “LogoPINcode”andthenumber()willturnredforamoment.EnterthecorrectLogoPINcodealloveragain.

Change the Logo PIN codeLogoPINcodecanbechangedtoyourdesiredfour-digitnumber.Press thePoint▼button to select “LogoPINcode change” and thenpress theSELECTbutton.TheNewLogoPINcodeinputdialogboxappears.SetanewLogoPINcode.

Besure tonote thenewLogoPINcodeandkeep it athand.Ifyoulostthenumber,youcouldnolongerchangethe Logo PIN code setting. For details on PINcodesetting,referto“PINcodelock”onpages54–55.

Use thePoint◄►buttons to switchOn/Off, and thenpress thePoint▼button tomove thepointer to “Quit.”PresstheSELECTbuttontoclosethedialogbox.

Change the Logo PIN code lock setting

Enter a Logo PIN code

AfteracorrectLogoPINcodeisentered,thefollowingdialogboxappears.

CAUTION:wHEN yOU HAVE CHANGED THE LOGO PIN CODE, wRITE DOwN THE NEw PIN CODE IN COLUMN OF THE LOGO PIN CODE NO . MEMO ON PAGE 76, AND KEEP IT SECURELy . SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED .

Change the Logo PIN code lock setting

Change the Logo PIN code

UsethePoint◄►buttonstoswitchOn/Off.

51

Setting

Ceiling

Rear

Ceiling

When this function is set to “On,” the picturewill be top/bottom and left/right reversed. This function is used toprojecttheimagefromaceiling-mountedprojector.

Rear

Whenthisfunctionissetto“On,”thepicturewillbeleft/rightreversed.This function is used to project the image fromrearofthescreen.

Input search

This function detects the input signal automatically.Whena signal is found, the searchwill stop.Use thePoint◄►buttonstoselectoneofthefollowingoptions. Off.......... Inputsearchwillnotwork. On1........ Inputsearchworksunderthefollowingsituation. –WhenpressingtheINPUTbuttononthetop

control. –WhenpressingtheCOMPUTERbuttonor

VIDEObuttonontheremotecontrol. On2........ Inputsearchworksunderthefollowingsituation. –Whenturningontheprojectorbypressingthe

POWERON/STAND-BYbuttononthetopcontrolortheremotecontrol.

–WhenpressingtheCOMPUTERbuttonorVIDEObuttonontheremotecontrol.

–WhenpressingtheINPUTbuttononthetopcontrol.

–Whenthecurrentinputsignaliscutoff.*

*If theNo show or Freeze function is active, cancel it toactivate the Input search. It is also unavailablewhenOn-Screenmenuisdisplayed.

Notes: •WhileInputsearchissetto“On1”or“On2,”thestatusofInputandLamparedisplayedeverytimethesignalisswitched.

•Onlythelastselectedinputsourcecanbedetected. •IftheINPUTbuttononthetopcontrolorCOMPUTER, VIDEO or NETWORK buttonsontheremotecontrolispressedduringInputsearchisinprogress,Inputsearchwillstopandgobacktothepreviousinputsignal.

5�

Setting

Power management

TimeleftbeforeLampisoff.

Power management

For reducing power consumption as well as maintainingthe lamp life, thePowermanagement function turns off theprojectionlampwhentheprojectorisnotoperatedforacertainperiod.

If the input signal is interruptedandnobutton is pressed formore than 30 seconds, the timer display with “No signal”appears. It starts the countdownuntil the lamp is turnedoff.UsethePoint◄►buttonstosetthecountdowntimer.

Selectoneofthefollowingoptions:Ready.................. Whenthelamphasbeenfullycooleddown,

the POWER indicator changes to greenblinking. In this condition, the projectionlampwill be turned on if the input signalis reconnected or any button on the topcontrolorremotecontrolispressed.

Shutdown............ Whenthelamphasbeenfullycooleddown,thepowerwillbeturnedoff.

Off........................ Powermanagementfunctionisoff.

Standby mode

This function is available when operating the projector vianetwork. Normal....... Supply the power to the network function even

after turning off the projector.You can turn on/off the projector via network,modify networkenvironment, and receive an e-mail aboutprojector statuswhile the projector is poweredoff.

Eco............ Select “Eco”whenyoudonotuse theprojectorvianetwork.Theprojector’snetworkfunctionwillstopwhenturningofftheprojector.

Refertotheowner’smanual“NetworkSet-upandOperation”.

Note: •WhenselectingNormal,thecoolingfansmayberunningdependingonthetemperatureinsidetheprojectoreveniftheprojectoristurnedoff.

Press theSELECTbuttonatPowermanagementandthisdialogboxappears.Use thePoint◄►buttons tochooseone of the three options.Press thePoint▼button toselect the timer, and thenusethePoint◄►buttonstosettimer.

Note: •Factorydefaultis"Ready:5min.".

5�

Setting

On start

Remote controlRemote control

Pointer

When this function is set to “On,” the projector will beautomatically turned on just by connecting theAC powercordtoawalloutlet.

Note: •Besure to turnoff theprojectorproperly (see “TurningOfftheProjector”onpage23).Iftheprojectoristurnedoffintheincorrectsequence,theOnstartfunctiondoesnotworkproperly.

You can emphasize a part of the projected image withthis function.Use thePoint▲▼buttons to choose eitherSpotlight or Pointer and press theSELECT button.Thenuse thePoint◄►buttons to selecta sizeof theSpotlight(Large,Middle,orSmall)orapatternofthePointer(Arrow,Finger,orDot).See“PointerFunction”onpage14.

Pointer

UsethePoint▲▼buttonsto chooseeitherSpotlightor Pointer, and then usethe Point ◄► buttonsto switch between theoptions.

Theeight different remote control codes (Code1–Code8)are assigned to the projector; the factory-set, initial code(Code1)andtheothersevencodes(Code2toCode8).

The same code should set on both the projector and theremote control. For example, operating the projector in“Code7”,theremotecontrolcodealsomustbeswitchedto“Code7”.

To change the code for the projector SelectaremotecontrolcodeinthisSettingMenu.

To change the code for the remote control: While holding down theMENUbutton, press the IMAGEbutton the number of times corresponding to the remotecontrolcodefortheprojector.See“RemoteControlCode”onpage15.

Thisfunctionallowsyoutochangebrightnessofthescreen.Auto........... Thebrightnessaccordingtotheinputsignal

(betweenHighandEcomode).High........... BrighterthantheNormalmode.Normal....... NormalbrightnessEco............ Lowerbrightnessreducesthelamppower

consumptionandextendsthelamplife.

Lamp control

5�

Setting

Key lock

Key lockSecurity (Key lock and PIN code lock )

PIN code lock PIN code lock

This function locks the top control and remote controlbuttonstopreventoperationbyunauthorizedpersons.

..... Unlocked.

..... Lock theoperationof the top control.Tounlock,usetheremotecontrol.

..... lock theoperationof the remote control.Tounlock,usethetopcontrol.

Ifthetopcontrolaccidentallybecomeslockedandyoudonothavetheremotecontrolnearbyorthereissomethingwrongwithyourremotecontrol,contactthedealerwhereyoupurchasedtheprojectorortheservicecenter.

ThisfunctionallowsyoutousetheKeylockandPINcodelockfunctiontosetthesecurityfortheprojectoroperation.

SelectKey lock.UsethePoint▲▼buttonstochooseoneof theoptions and select[Yes]toactivateit.

Thisfunctionpreventstheprojectorfrombeingoperatedby unauthorized persons and provides the followingsettingoptionsforsecurity. Off............ Unlocked. On1.......... EnterthePINcodeeverytimeturningon

theprojector. On2.......... EnterthePINcodetooperatetheprojector

once the power cord is disconnected; aslong as theAC power cord is connected,the projector can be operated without aPINcode.

Wheneveryouchange thePINcode locksettingor thePIN code (the four-digit number), you are required toenter thePINcode.The “1234” is setas the initialPINcodeatthefactory.

If youwant to change thePINcode lock setting,Pressthe SELECT button and the PIN code dialog boxappears.

When the projector is lockedwithaPINcode,thePINcodelock symbol appears on themenubar.

On1

On1

55

Setting

Change the PIN code lock setting

UsethePoint◄►buttonstoswitchbetweentheoptions.

UsethePoint◄►buttonstoselectOff,On1,orOn2andthenmove thepointer to “Quit”with thePoint▼button.PresstheSELECTbuttontoclosethedialogbox.

Change the PIN code lock setting

Enter a PIN codeUse thePoint▲▼buttons toenter anumber.Press thePoint►buttontofixthenumberandmovetheredframepointertothenextbox.Thenumberchangesto“.”Ifyoufixedanincorrectnumber,usethePoint◄buttontomovethepointer to thenumber youwant to correct, and thenenterthecorrectnumber.


After entering the four-digit number,move the pointer to“Set.”Press theSELECTbuttonso that youcanstart tooperatetheprojector.

IfyouenteredanincorrectPINcode,“PINcode”andthenumber ()will turn red for amoment. Enter thecorrectPINcodealloveragain.

Enter a PIN code

AfteracorrectPINcodeisentered,thefollowingdialogboxappears.

The PIN code can be changed to your desired four-digit number. Press the Point▼ button to select “PINcode change” and press theSELECTbutton.TheNewPINcodeinputdialogboxappears.SetanewPINcode.

Change the PIN code Change the PIN code

CAUTION:wHEN yOU HAVE CHANGED THE PIN CODE, wRITE DOwN THE NEw PIN CODE IN COLUMN OF THE PIN CODE NO . MEMO ON PAGE 76, AND KEEP IT SECURELy . IF yOU FORGET yOUR PIN CODE, THE PROjECTOR CAN NO LONGER BE STARTED .

56

This function provides the following options in the coolingfans’operationwhentheprojectoristurnedoff(p.23). L1......Normaloperation L2......Slowerandlower-soundthanthenormaloperation

(L1), but it takesmore time to cool the projectordown.

Fan

Setting

Fan control

Fan

warning logThis function records anomalous operations while theprojector is inoperationanduse itwhendiagnosing faults.Upto10warninglogsaredisplayedwiththelatestwarningmessageatthetopofthelist,followedbypreviouswarningmessagesinchronologicalorder.

Note: •WhentheFactorydefaultfunctionisexecuted,allthewarninglogrecordswillbedeleted.

Thisfunctionisusedtoresetthelampcounter.When the lamp life is left less than 100 hours, the Lampreplacementicon(Fig.1)willappearonthescreen,indicatingthattheendoflamplifeisapproaching.Whenthelamplifeisleft0hour,theLampreplacementicon(Fig.2)willappearonthescreen, indicating that theendoflamplifeisreached.Whenreplacingtheprojectionlamp,resetthelampcounter.See"ResettingtheLampCounter"onpage62.

Lamp counter

Thisiconappearsonthescreenwhentheendoflamplifeisapproaching.

Thisiconappearsonthescreenwhentheendoflamplifeisreached.

Fig .1Lampreplacementicon

Fig .�Lampreplacementicon

Note: •Thisiconalsoappearsatturningonandselectinginputsource.

Note: •Atturningon,theicon(Fig.2)willappear. Atselectinginputsource,theicon(Fig.1)willappear.

Note: •TheLamp replacement icons (Fig.1 andFig.2)will notappearwhen theDisplay function isset to “Off” (p.48),during“Freeze”(p.28),or“Noshow”(p.29).

0º180º

0º

180º

-50º

NG

GOOD

+50º

40º

50º50º

40º

Fan Control Setting

On1

Choosetherunningspeedofcoolingfansfromthefollowingoptionsaccordingtothegroundelevationunderwhichyouusetheprojector.Off.......Normalspeed.Setthisfunctionto“Off”whenusingtheprojectorinnon-highaltitudeenvironment.On1...FasterthanOffmode.Selectthismodewhenusingtheprojectorinhighaltitudes(about1,200metersormoreabovethesealevel)wherethefanshavelesscoolingeffect.On2....FasterthanOn1mode.Selectthismodewhenusingtheprojectorinhigheraltitudesthanabovewherethefanshavelessercoolingeffect.On3....BesuretosettheLampcontrolinHighandtheFancontrolinOn3whenusingtheprojectorinclinedatbetween+40degreesto+140degreestothehorizontalplaneataltitudesbetween0andapproximately1,600metersabovesealevel.Note:•ThefannoisebecomeslouderinOn1,On2andOn3.•Setting“Fancontrol”toOn1,On2orOn3affectsL2operationin“Fan.”

57

Setting

Factory defaultThis function returns all setting valuesexcept for the userlogo,PINcodelock,LogoPINcodelock,lampcounter,andfiltercountertothefactorydefaultsettings.

ExittheSettingMenu.

QuitSelectFactorydefaultandthisboxappears.Select[Yes],andthenextboxappears.

Select[Yes]toactivateit.

Factory default

Thisfunctionisusedtosetafrequencyforthefiltercleaning.

When the projector reached a specified time betweencleanings, a Filter warning icon appears on the screen,notifying thecleaning isnecessary.Aftercleaning the filter,be sure to select RESET and set the timer. The Filterwarningiconwillnotturnoffuntilthefiltercounterisreset.

Fordetailsaboutresettingthetimer,referto“ResettingtheFilterCounter”onpage59.

Filter counter Filter counter

UsethePoint◄►buttonsto set the timer. Selectfrom (Off/100H/ 200H/300H) depending on theuseenvironment.

Filterwarningiconappearsonthescreenatasettime.

Fig .�Filterwarningicon

Fig .�Filterwarningicon

Note: •Thisiconalsoappearsatturningon.

Notes: •Atselectinginputsource,theicon(Fig.4)willappear.

•The Filter warning icons (Fig.3 andFig.4)will not appearwhen theDisplayfunction is set to “Off” (p.48), during“Freeze”(p.28),or"Noshow"(p.29).

On1

On1

58

TheWARNING indicator shows the stateof the functionwhichprotects theprojector.Check the stateof theWARNINGindicatorandthePOWERindicatortotakepropermaintenance.

warning Indicator

The projector is shut down and the wARNING indicator is blinking red .When the temperature inside the projector reaches acertainlevel,theprojectorwillbeautomaticallyshutdowntoprotect the insideof theprojector.ThePOWERindicator isblinkingwhiletheprojectorisbeingcooleddown.Whentheprojectorhascooleddownenough (to itsnormaloperatingtemperature), it can be turned on again by pressing thePOWERON/STAND-BYbutton.

The projector is shut down and the wARNING indicator lights red .When the projector detects an abnormal condition, it isautomaticallyshutdowntoprotecttheinsideoftheprojectorandtheWARNINGindicatorlightsred.Inthiscase,unplugtheAC power cord and reconnect it, and then turn theprojectorononceagain toverifyoperation. If theprojectorcannotbeturnedonandtheWARNINGindicatorstill lightsred, unplug theAC power cord and contact the servicestation.

CAUTIONDONOTLEAVETHEPROJECTORWITHTHEACPOWERCORDCONNECTEDUNDERANABNORMALCONDITION.ITMAYRESULTINFIREORELECTRICSHOCK.

Maintenance and Cleaning

Top Control

Top Control

Note: •TheWARNING indicator continues to blink even afterthe temperature inside the projector returns to normal.When the projector is turnedonagain, theWARNINGindicatorstopsblinking.

Then check the matters below:–Didyouprovideappropriatespacefor theprojector tobeventilated?Check the installingcondition tosee if theairventsoftheprojectorarenotblocked.

–HastheprojectorbeeninstallednearanAir-Conditioning/Heating Duct or Vent? Move the installation of theprojectorawayfromtheductorvent.

–Isthefilterclean?Cleanthefilterperiodically.

WARNINGemitaredlight

WARNINGblinkingred

59


Turnoff theprojector, andunplug theACpower cordfromtheACoutlet.

Turntheprojectoroverandremovethefiltersbypullingthelatchesupward.

1�

Filterspreventsdustfromaccumulatingontheopticalelementsinsidetheprojector.Shouldthefiltersbecomecloggedwith dust particles, itwill reduce cooling fans’ effectiveness andmay result in internal heat buildupandadverselyaffect the lifeof theprojector. Ifa “Filterwarning” iconappearson thescreen,clean the filtersimmediately.Cleanthefilterbyfollowingthestepsbelow.

Gently clean the filters by using a brush or rinse itsoftly.�When rinsing the filters, dry theywell. Replace thefilters properly. Make sure that the filters are fullyinsertedtotheprojector.

�

CAUTIONDo not operate the projector with the filtersremoved. Dust may accumulate on the opticalelementsdegradingpicturequality.Do not put anything into the air vents.Doing somayresultinmalfunctionoftheprojector.

RECOMMENDATION we recommend avoiding dusty/smoky environments

when you operate the projector . Usage in these environments may cause poor image quality . Whenusingtheprojectorunderdustyorsmokyconditions,dustmay accumulate on a lens, LCDpanels, or opticalelements inside the projector degrading the quality of aprojected image.When thesymptomsabovearenoticed,contactyourauthorizeddealerorservicestationforpropercleaning.

Note: •Whenreinsertingthisfilters,besurethattheslitpartisfacingtheouterside.

BesuretoresettheFiltercounteraftercleaningorreplacingthefilters.


Use the Point▲▼ buttons tomove the red framepointer to Filter counter and then press theSELECTbutton. A dialog box appears showing the totalaccumulated time of the filter use, a timer settingoption, and the reset option. Select Reset and the“Filter counter Reset?” appears. Select [Yes] tocontinue.

1

�

Resetting the Filter Counter

Filter counter

SelectResetandthe“FiltercounterReset?”appears.

Select[Yes],thenanotherconfirmationboxappears.

Select[Yes]againtoresettheFiltercounter.

Another confirmationdialogboxappears, select [Yes]toresettheFiltercounter.�

FiltersPullupandremove.

Cleaning the Filters

On1

60


Cleaning the Projector Cabinet

Cleaning the Projection LensUnplugtheACpowercordbeforecleaning.

Gentlywipe the projection lenswith a cleaning cloth thatcontainsasmallamountofnon-abrasivecameralenscleaner,or usea lens cleaningpaper or commercially available airblowertocleanthelens.

Avoid using an excessive amount of cleaner.Abrasivecleaners,solvents,orotherharshchemicalsmightscratchthesurfaceofthelens.

UnplugtheACpowercordbeforecleaning.

Gentlywipe theprojector bodywith a soft dry cleaning cloth.Whenthecabinetisheavilysoiled,useasmallamountofmilddetergentandfinishwithasoftdrycleaningcloth.Avoidusinganexcessiveamountofcleaner.Abrasivecleaners,solvents,orotherharshchemicalsmightscratchthesurfaceofthecabinet.

When the projector is not in use, put the projector in anappropriatecarryingcasetoprotectitfromdustandscratches.

Whenmoving this projector orwhile not using it over anextendedperiodoftime,replacethelenscap.

Attachthelenscapaccordingtothefollowingprocedures.

Passthestringthroughaholeofthelenscap.

Turn over the projector and remove the screwwith ascrewdriver.

Attaching the Lens Cap

Attachthestringwithlenscaptoaholeatthebottomoftheprojectorandsecureitwithascrew.

1

2

3

LensCap

StringforthelenscapSecure it to the holewithascrew.Hole

61


When theprojection lampof theprojector reaches its endoflife, theLamp replacement iconappearson the screenandLAMPREPLACEindicatorlightsyellow.Replacethelampwitha newonepromptly.The timingwhen theLAMPREPLACEindicatorshouldlightisdependingonthelampmode.

Followthesestepstoreplacethelamp.

Lamp

ORDER REPLACEMENT LAMPReplacementlampcanbeorderedthroughyourdealer.Whenorderingaprojectionlamp,givethefollowinginformationtothedealer.

● Model No . of your projector : PLC-XU115 ● Replacement Lamp Type No . : POA-LMP111 (ServicePartsNo.6103339740)

For continued safety, replacewith a lampof thesame type.Donotdropa lampor touchaglassbulb!Theglasscanshatterandmaycauseinjury.

Allow a projector to cool for at least 45minutesbeforeyouopentheLampcover.Theinsideoftheprojectorcanbecomeveryhot.

CAUTION

Screw

Turnoff theprojector andunplug theACpower cord.Lettheprojectorcoolforatleast45minutes.

Remove the two (2)screws thatsecure the lamp.Liftthelampoutoftheprojectorbyusingthehandle.

1

�Replacethe lampwithanewoneandsecure thetwo(2) screws.Make sure that the lamp is set properly.Closethelampcoverandsecurethescrew.

�

Removethescrewandopenthelampcover.�

Connect theACpower cord to theprojector and turnontheprojector.

6 Reset the lamp counter .See“ResettingtheLampCounter”onthenextpage.

5

Lamp Replacement

Handle

Screw

CAUTION

LampCover

wARNING:TURNOFFTHEUVLAMPBEFOREOPENINGTHELAMPCOVER

Top Control

LAMP REPLACE indicator

Lampreplacementicon

Presshereandpullupward.

Note: •TheLampreplacementiconwillnotappearwhenthe

Displayfunctionissetto“Off”(p.48),during“Freeze”(p.28),or“Noshow”(p.29).

Screw

6�


Thisprojectorusesahigh-pressurelampwhichmustbehandledcarefullyandproperly.Improperhandlingmayresultinaccidents,injury,orcreateafirehazard.

●Lamplifemaydifferfromlamptolampandaccordingtotheenvironmentofuse.Thereisnoguaranteeofthesamelifeforeachlamp.Somelampsmayfailorterminatetheir life inashorterperiodoftimethanothersimilarlamps.

●Iftheprojectorindicatesthatthelampshouldbereplaced,i.e., if theLAMPREPLACEindicatorlightsup,replacethelampwithanewoneIMMEDIATELYaftertheprojectorhascooleddown.

(FollowcarefullytheinstructionsintheLampReplacementsectionofthismanual.)ContinuoususeofthelampwiththeLAMPREPLACEindicatorlightedmayincreasetheriskoflampexplosion.

●ALampmayexplodeasa resultofvibration,shockordegradationasa resultofhoursofuseas itslifetimedraws toanend.Riskof explosionmaydiffer according to theenvironment or conditions inwhichtheprojectorandlamparebeingused.

IF A LAMP EXPLODES, THE FOLLOwING SAFETy PRECAUTIONS SHOULD BE TAKEN .If a lamp explodes, disconnect the projector’sAC plug from theAC outlet immediately. Contact anauthorized service station for a checkup of the unit and replacement of the lamp.Additionally, checkcarefullytoensurethattherearenobrokenshardsorpiecesofglassaroundtheprojectororcomingoutfrom thecoolingaircirculationholes.Anybrokenshards foundshouldbecleanedupcarefully.Nooneshould check the insideof theprojector except thosewhoareauthorized trained technicians andwhoarefamiliarwithprojectorservice.Inappropriateattemptstoservicetheunitbyanyone,especiallythosewhoarenotappropriatelytrainedtodoso,mayresultinanaccidentorinjurycausedbypiecesofbrokenglass.

LAMP HANDLING PRECAUTIONS

Resetting the Lamp CounterBe sure to reset the Lamp counter after the lamp is replaced.When the Lamp counter is reset, the LAMPREPLACEindicatorstopslightingandtheLampreplacementicondisappears.


Use the Point▲▼ buttons tomove the red framepointer to Lampcounter and thenpress theSELECTbutton. A dialog box appears showing the totalaccumulated time of the lamp usage and the resetoption. Select Reset and the “Lamp replacementcounterReset?”appears.Select[Yes]tocontinue.

1

�

Another confirmationdialogboxappears, select [Yes]toresettheLampcounter.�

Note: •Do not reset the Lamp counterwithout implementinglamp replacement.Be sure to reset the Lamp counteronlyafterreplacingthelamp.

Select Reset and the “Lampreplacement counter Reset?”appears.

Select [Yes],then anotherconfirmationboxappears.

Select[Yes]againtoresettheLampcounter.

On1

6�

Problem: –Solutions

No power –PlugthepowercordoftheprojectorintotheACoutlet. –SeeifthePOWERindicatorlightsred. –WaituntilthePOWERindicatorstopsblinkingtoturnontheprojector

again.TheprojectorcanbeturnedonafterthePOWERindicatorturnsred.Seepage22.

–ChecktheWARNINGindicator.IftheWARNINGindicatorlightsred, projectorcannotbeturnedon.Seepage58. –Checktheprojectionlamp.Seepage61. –UnlocktheKeylockfunctionfortheprojector.Seepage54.

The initial display is not shown . –Makesure"Off"or"Countdownoff"arenotchosenatdisplay function.(seepage48)

The initial display is not same –Makesure"User"or"Off"arenotchosenatLogo(select)as the default set . function.(seepage48)

Input signal switches automatically . –MakesureInputsearchfunctionisadjustedproperly.Seepage51.(or does not switch automatically)

when the projector is on and you –ThatistheFilterwarningicon.Refertopage57.press the input button, an icon other than the Lamp mode icon appears.

An icon other than Input mode or –ThatistheLampreplacementiconortheFilterwarningicon.SeeLamp mode icon appears . page56or57.

Image is out of focus . –Adjustfocusoftheprojector.Seepage26. –Provideproperdistancebetweentheprojectorandtheprojection screen.Seepage17. –Checktheprojectionlenstoseeifitneedscleaning.Seepage60. –Movingtheprojectorfromacooltowarmplacemayresultin moisturecondensationontheprojectionlens.Insuchcases,leave theprojectoroffandwaituntilcondensationevaporates.

Image is Left/Right reversed . –ChecktheCeiling/Rearfunction.Seepage51.Image is Top/Bottom reversed . –ChecktheTop/Bottomfunction.Seepage51.Picture is not bright enough . –Checkifthe'Contrast"or"Brightness"areadjustedproperly.(see page37,44) –Checkif"Imagemode"isselectedproperly.(seepage36,43) –Checkthelampcontrolfunction.(seepage28) –ChecktheLAMPREPLACEindicator.Ifitlights,theendoflamplife isapproaching.Replacethelampwithanewonepromptly.(seepage 61)

Appendix

TroubleshootingBeforecallingyourdealerorservicecenterforassistance,checktheitemsbelowonceagain.

–Makesureyouhaveproperlyconnectedtheprojectortoperipheralequipmentasdescribedonpages19-21.–MakesureallequipmentisconnectedtoACoutletandthepoweristurnedon.–Whentheprojectordoesnotprojectanimagefromtheconnectedcomputer,restartthecomputer.

6�

Appendix

No image –Checktheconnectionbetweenyourcomputerorvideoequipment andtheprojector.Seepages19-21. –Seeiftheinputsignaliscorrectlyoutputfromyourcomputer.Some laptopcomputersmayneedtochangethesettingformonitoroutput whenconnectingtoaprojector.Seeyourcomputer’sinstruction manualforthesetting. –Ittakesabout30secondstodisplayanimageafterturningonthe projector.Seepage22. –ChecktheInputsignal,colorsystem,videosystemorcomputer

systemmode. –MakesurethetemperatureisnotoutofthespecifiedOperating Temperature(41˚F–95˚F[5˚C–35˚C]). –When"NoShow"isoperating,theimagecannotbedisplayed.Press theNOSHOWbuttonoranyotherbuttonontheremotecontrol.

No sound –Checktheaudiocableconnectionfromaudioinputsource. –Adjusttheaudiosource. –PresstheVolume+button.Seepage27. –PresstheMutebutton.Seepage27. –WhentheAUDIOOUTisplugged-in,theprojector'sbuilt-inspeaker isnotavailable –Istheimageprojected?Youwillhearthesoundonlywhentheimage isprojected.

The color is strange . –ChecktheInputsignal,colorsystem,videosystemorcomputer systemmode. –Makesurethe"Blackboard"isnotselectedonImageselect menu.(seepage36,43)

Some displays are not seen –ChecktheDisplayfunction.Seepage48. during the operation .

Auto PC adjustment function –ChecktheInputsignal.AutoPCfunctioncannotworkwhen does not work . 480p,575p.720p,480i,575i,1035ior1080iisselectedorwhenthe digitalsignalisinputintoDVIterminal.(seePage34) –Theiconisnotavailableingrayoutwhenthedigitalsignalisinput.

The setting does not remain –Makesureyouselected"Store"afteradjustingsetting.Somesettings after turning off power . cannotbestoredifnotregisteredwith"Store".(seepage45)

Power management does –Powermanagementfunctioncannotworkwhile"Freeze"or"No work . Show"functionisrunning.(seepage52)

Capture function does not work . –Checktheconnectionandtheinputsignaltoseeifthereissignal.

Auto setup does not work properly . –Makesure"Off"isnotselectedattheAutosetupfunction.(seepage 47) –Makesure"On"isnotselectedattheCeilingfunction.(seepage51)

Auto keystone function does not –MakesuretheAutokeystonefunctionisnotsetto"Manual".Press work even when the projector is theAUTOSETUPbuttononthetopcontrol.(seepage26,47) tipped .

65

Appendix

The image is distorted or runs off . –Check"PCadjustment"menuor"Screen"menuandadjustthem. (page33-34,38-39)

PIN code dialog box appears –PINcodelockisbeingset.EnteraPINcode(the“1234”ornumbers at start-up . youhaveset).Seepages22,54–55.

Page Up/Down function does –MakesureyourcomputerisconnectedtotheprojectorwithUSB notwork . cable.(seepage19) –Checkcableconnectionbetweentheprojectorandyourcomputer. (seepage19)

The Remote Control does –Checkthebatteries. not work . –Makesurenoobstructionisbetweentheprojectorandremote control. –Makesureyouarenottoofarfromtheprojectorwhenusingthe remotecontrol.Maximumoperatingrangeis16.4'(5m). –Wirelessremotecontroldoesnotworkwhentheremotecontrol cableisconnectedtotheprojector.(seepage13) –Makesurethecodeoftheremotecontrolisconformedtothe projector’scode.Seepage53. –UnlocktheKeylockfunctionfortheremotecontrolfunction.See page54. –CheckRESET/ON/ALL-OFFswitchontheremotecontrolissetto

“ON”.Seepage15.

Indicator blinks or lights . –Checkthestatusoftheprojectorwithreferringto"Indicatorsand projectorCondition".(seepage69)

wireless Mouse function does –Checktheconnectionbetweenaprojectorandyourcomputer. not work . –Checkthemousesettingonyoucomputer. –Makesurethemousedriverisinstalledonyourcomputer, otherwise,theremotecontrolcannotbeusedasawirelessmouse. –Makesurethesignalisfromthecomputer,otherwise,theremote controlcannotbeusedasawirelessmouse. –Turnontheprojectorbeforeturningonthecomputer.

The exclamation mark appears –Youroperationisinvalid.Operatecorrectly. on the screen .

Top control does not work . –Thetopcontrolisnotavailableifthetopcontrolislockedat"Key lock"under"Security"ofSETTINGsection.Pleasecheck"SETTING" sectiononpage54.

Unable to unlock the Logo PIN –Contactthedealerwhereyoupurchasedtheprojectorortheservice code lock, Security key lock center. or Security PIN code lock .

66

wARNING :High voltages are used to operate this projector . Do not attempt to open the cabinet .

Ifproblemsstillpersistafterfollowingalloperatinginstructions,contactthedealerwhereyoupurchasedtheprojectorortheservicecenter.Specifythemodelnumberandexplainabouttheproblem.Wewilladviseyouhowtoobtainservice.

This symbol on thenameplatemeans the product is ListedbyUnderwriters LaboratoriesI n c . I t i s d e s i g n e d a n dmanufactured tomeet rigidU.L. safety standardsagainstr i sk o f f i r e , casua l t y andelectricalhazards.

TheCEMark is aDirective conformitymarkoftheEuropeanCommunity(EC).

Appendix

Pixelworks ICs used.

67

Appendix

Menu Tree

SVGA1Mode1Mode2----

AutoPCAdj.

TotaldotsHorizontalVertical

DisplayareaHDisplayareaVReset

Dynamic

RealBlackboard(Green)Image1Image2Image3

Image Adjust ContrastBrightnessColortemp.

Red

Gamma

Store

QuitNormalTrue

Digitalzoom–

Full

0–630–63

Computer Input

PC Adjust

Mode1Mode2Mode3Mode4Mode5

Image Select

High

0–63

0–15

Image1Image2Image3Image4

Screen

Quit

Yes/No

*SystemsdisplayedintheSystemMenuvarydependingonaninputsignal.

Reset Yes/No

Sharpness 0–15

Computer Input/Video Input

SoundVolumeMuteQuit

On/OffSound 0–63

Input

Video AutoGotoSystem(3)GotoSystem(3)

VideoGotoSystem(3)

GotoSystem(1)

S-video

Standard

Mode3Mode4Mode5Quit

H-syncfreq.

QuitClampCurrentmode

Digitalzoom+

GreenBlue

0–630–63

Quit

Quit

Quit

Store

Modefree

System (1)

Quit

MidLowXLow

Quit

Adj.

N/ARGB(AVHDCP)N/AComputer1(Digital) RGB(PCdigital)

Computer1(Analog)

GotoSystem(2)ComponentGotoSystem(1)Computer2 RGB

N/ARGB(Scart)

Seeowner’smanual“NetworkSet-upandOperation”Wired

Image4

Wireless Seeowner’smanual“NetworkSet-upandOperation”

N/A........notapplicable

Finesync 0–31

Mode1Mode2

V-syncfreq.

Custom ScaleH&VPositionCommon

QuitReset

H/V

H/VYes/NoYes/No

Wide

68

Appendix

AutoPALSECAMNTSCNTSC4.43PAL-MPAL-N

Video InputAuto1080i1035i720p575p480p575i480i

Dynamic

CinemaBlackboard(Green)Image1Image2Image3

Quit

Normal

0–630–63

Off

Setting

Image Select

System (2)

System (3)

Image Adjust ContrastBrightnessColorTint

RedGreenBlueSharpness

ResetStore

Gamma

Progressive

0–630–630–630–150–15

Image1

Screen

Yes/No

Quit

Image4

LanguageSetting 16languagesprovided.

On/OffOn/Countdownoff/OffLogoselect

On/OffOn/Off

Off

On/OffAuto/High/Normal/Eco

Code1–Code8

KeystoneBluebackDisplayLogo

CeilingRear

Powermanagement

OnstartLampcontrol

Remotecontrol

ReadyShutdown

Security

PINcodelock

Quit

Timer(1–30Min.)Quit

L1/L2Fan

Standard

OffNoisereduction

Store/Reset

L1L2

MidLowXLow

0–630–63

Image2Image3Image4

L2L1

Quit

Off

UserCapture

Yes/No

Off/OnLogoPINcodechangeQuit

LogoPINcodelock

OffProjectorRemotecontrolQuit

Keylock

Default

Off/On1/On2PINcodechangeQuit

Adj.

Film

AutosetupOn/Off

Standbymode Eco/NormalInputsearch Off/On1/On2

Spotlight/PointerPointerQuitColortemp. High

QuitAutoPCadj.

AutokeystoneAutoManualOff

FancontrolWarninglog

Hour(s)LampcounterYes/No

Hour(s)Filtercounter

Yes/NoOff/100H/200H/300H

Reset

Reset

Yes/NoFactorydefaultQuit

Quit

Quit

Wide

ScaleH&VPositionCommon

QuitReset

H/V

H/VYes/NoYes/No

Custom

Off/On1/On1/On3

69

Checktheindicatorsforprojectorcondition.

•••green. •••red •••off

•••blinksgreen.

Whentheprojectionlampreachesitsendoflife,theLAMPREPLACEindicatorlightsyellow.Whenthisindicatorlights yellow, replace theprojection lampwith a newonepromptly.Reset the lamp replacement counter afterreplacingthelamp.Seepages61-62.

Theprojectorisoff.(TheACpowercordisunplugged.)

Theprojector is instand-bymode.PressthePOWERON/STAND-BYbuttontoturnontheprojector.

Projector ConditionPOWERred/green

IndicatorsLAMP

REPLACEyellow

WARNINGred

The projector is preparing for stand-by or the projection lamp isbeingcooleddown.TheprojectorcannotbeturnedonuntilcoolingiscompletedandthePOWERindicatorstopsblinking.

The temperature inside the projector is abnormally high. Theprojector cannotbe turnedon.When theprojector is cooleddownenough and the temperature returns to normal, the POWERindicator stops blinking and the projector can be turned on. (TheWARNINGindicatorkeepsblinking.)Checkandcleanthefilter.

Theprojectordetectsanabnormalconditionandcannotbe turnedon. Unplug theAC power cord and plug it again to turn on theprojector. If theprojector is turnedoff again,unplug theACpowercord and contact the dealer or the service center for service andcheckup.Do not leave the projector on. Itmay cause an electricshockorafirehazard.

Theprojectorisoperatingnormally.

TheprojectorisinthePowermanagementmode.

Theprojectorhasbeencooleddownenoughand the temperaturereturns to normal.When turning on the projector, theWARNINGindicatorstopsblinking.Checkandcleantheairfilter.

Indicators and Projector Condition

•••blinksred.

Appendix

70

Appendix

Compatible Computer Specifications

BasicallythisprojectorcanacceptthesignalfromallcomputerswiththeV-,H-Frequencymentionedbelowandlessthan140MHzofDotClockforanalogsignaland110MHzofDotClockfordigitalsignal.

Whenselectingthesemodes,PCadjustmentcanbelimited.

ON-SCREEN DISPLAy RESOLUTION H-Freq .

(KHz)V-Freq .

(Hz)VGA1 640x480 31.47 59.88VGA2 720x400 31.47 70.09VGA3 640x400 31.47 70.09VGA4 640x480 37.86 74.38VGA5 640x480 37.86 72.81VGA6 640x480 37.50 75.00

MACLC13 640x480 34.97 66.60MAC13 640x480 35.00 66.67

MAC16 832x624 49.72 74.55

SXGA1 1152x864 64.20 70.40

SVGA1 800x600 35.156 56.25SVGA2 800x600 37.88 60.32SVGA3 800x600 46.875 75.00SVGA4 800x600 53.674 85.06SVGA5 800x600 48.08 72.19SVGA6 800x600 37.90 61.03SVGA7 800x600 34.50 55.38SVGA8 800x600 38.00 60.51SVGA9 800x600 38.60 60.31

SVGA11 800x600 38.00 60.51


(KHz)V-Freq .

(Hz)

XGA10 1024x768XGA11 1024x768XGA12 1024x768XGA13 1024x768

62.04 77.07

XGA14 1024x768

61.00 75.70

XGA15 1024x768

35.522 86.96(Interlace)

46.90 58.20

XGA8 1024x768

47.00 58.30

XGA9 1024x768

58.03 72.00

SXGA4 1280x1024

63.48 79.3536.00 87.17

(Interlace)

63.34 59.98SXGA5 1280x1024SXGA6 1280x1024SXGA7 1280x1024

63.74 60.0171.69 67.19

SXGA10 1280x960

81.13 76.107

60.00 60.00

XGA1 1024x768

XGA4 1024x768

48.36 60.00

XGA6 1024x768XGA7 1024x768

56.476 70.07

48.50 60.0244.00 54.58

SXGA8 1280x1024SXGA9 1280x1024

63.98 60.0279.976 75.025

XGA5 1024x768 60.31 74.92

VGA7 640x480 43.269 85.00

575i –––––––– 15.625 50.00(Interlace)

480i –––––––– 15.734 60.00(Interlace) SXGA12 1152x900 71.40 75.60

SXGA11 1152x900 61.20 65.20

SVGA10 800x600 32.70 51.09

SXGA13 1280x1024 50.00 86.00(Interlace)

SXGA2 1280x1024 62.50 58.60SXGA3 1280x1024 63.90 60.00

XGA2 1024x768 68.677 84.997XGA3 1024x768 60.023 75.03

SXGA18 1280x1024 46.43 86.70(Interlace)

SXGA19 1280x1024 63.79 60.18

SXGA14 1280x1024SXGA15 1280x1024SXGA16 1280x1024SXGA17 1152x900

50.00 94.00(Interlace)

63.37 60.0176.97 72.0061.85 66.00

MAC 1280x960 75.00 75.08MAC 1280x1024 80.00 75.08

1080i 1920x1080 33.75 60.00(Interlace)

720p 1280x720

1035i 1920x1035

45.00 60.00


1080i 1920x1080 28.125 50.00(Interlace)

SXGA+1 1400x1050 63.97 60.19

MAC21 1152x870 68.68 75.06

UXGA4 1600x1200 93.75 75.00

WXGA2 1360x768WXGA3 1376x768WXGA4 1360x768

UXGA1 1600x1200

47.70 60.00

UXGA2 1600x1200

48.36 60.00

UXGA3 1600x1200

56.16 72.00

75.00 60.0081.25 65.00

WXGA1 1366x768

87.5 70.00

48.36 60.00

SXGA+2 1400x1050 65.35 60.12SXGA+3 1400x1050 65.12 59.90

SXGA20 1280x1024 91.146 85.024

480p 640x480 31.47 59.88575p 768x575 31.25 50.00

WXGA7 1280x768WXGA8 1280x768

60.289 74.89368.633 84.837

WXGA6 1280x768 47.776 59.87

MAC19 1024x768 60.24 75.08

720p 1280x720 37.50 50.00

71

Appendix


(KHz)V-Freq .

(Hz)D-VGA 640x480 31.47 59.94D-480p 640x480 31.47 59.88D-575p 768x575 31.25 50.00D-SVGA 800x600 37.879 60.32

D-WXGA1 1366x768 48.36 60.00


(KHz)V-Freq .

(Hz)

D-720p 1280x720 37.50 50.00

D-1035i 1920x1035D-1080i 1920x1080D-1080i 1920x1080



28.125 50.00(Interlace)

D-XGA 1024x768 43.363 60.00

D-WXGA2 1360x768 47.7 60.00D-WXGA3 1376x768 48.36 60.00

WhentheinputsignalisdigitalfromDVIterminal,refertothechartbelow.

Note: •WhentheinputsignalisD-SXGA1,D-SXGA2,D-SXGA3,orD-SXGA+1,imagesmaynotbedisplayedproperlydependingoncomputers.

•Thespecificationsaresubjecttochangewithoutnotice.

D-WXGA4 1360x768 56.160 72.000D-WXGA5 1366x768 46.500 50.000D-WXGA6 1280x768 47.776 59.870D-WXGA7 1280x768 60.289 74.893

D-SXGA1 1280x1024 63.98 60.02D-SXGA2 1280x1024 60.276 58.069

D-SXGA+1 1400x1050 63.97 60.19

D-720p 1280x720 45.00 60.00

D-SXGA3 1280x1024 31.65 29.8

7�

Appendix

Technical SpecificationsMechanical Information ProjectorType Multi-mediaProjector Dimensions(WxHxD) 334mmx78mmx257.5mm(Notincludingadjustablefeet) NetWeight 3.6kg FeetAdjustment 0˚to8.9˚ Panel Resolution LCDPanelSystem 0.8”TFTActiveMatrixtype,3panels PanelResolution 1,024x768dots NumberofPixels 2,359,296(1,024x768x3panels) Signal Compatibility ColorSystem PAL,SECAM,NTSC,NTSC4.43,PAL-M,andPAL-N HighDefinitionTVSignal 480i,480p,575i,575p,720p,1035i,and1080i ScanningFrequency H-sync.15kHz–100kHz,V-sync.50–100Hz Optical Information ProjectionImageSize(Diagonal) Adjustablefrom40”to300” ThrowDistance 3.1'(0.93m)-37.6'(11.47m) ProjectionLens F1.7–2.5lenswithf=19.2mm–30.2mmwithmanualzoomandfocus ProjectionLamp 275W Interface VideoInputJack RCATypex1 S-videoInputJack MiniDIN4pinx1 AudioInputJacks RCATypex2 ComputerInput1/DVI-IInputTerminal DVI-ITerminalX1 ComputerInput2/ComponentInputTerminal MiniD-sub15pinX1MonitorOutputTerminalMiniD-sub15pinx1Computer/ComponentAudioInputJack MiniJack(stereo)x1 ServicePortConnector MiniDIN8pinx1 USBConnector USBSeriesBconnectorx1 AudioOutputJack MiniJack(stereo)x1(variable) LANConnectionTerminal100Base-TX(100Mbps)/10Base-T(10Mbps),RJ45SDCardSlotAudio InternalAudioAmp 1.0WRMS Built-inSpeaker 1speaker,ø28mmPower VoltageandPowerConsumption AC100–120V(4.0AMax.Ampere),50/60Hz(TheU.S.AandCanada) AC200–240V(2.0AMax.Ampere),50/60Hz(ContinentalEuropeandTheU.K.) Operating Environment OperatingTemperature 41˚F–95˚F(5˚C–35˚C) StorageTemperature 14˚F–140˚F(-10˚C–60˚C)Remote Control Battery AAAorLR03Typex2 OperatingRange 5m/±30˚ Dimensions 45mm(W)x23mm(H)x145mm(D) NetWeight 99g(includingbatteries) LaserPointer ClassIILaser(Max.Output:1mW/Wavelength:640–660nm)

7�

Appendix

ModelNo.

COMPONENT~VGA Cable : POA-CA-COMPVGA

SCART~VGA Cable : POA-CA-SCART

VGA-Cable (10 m) : KA-MC-DB10

REMOTE CONTROL CABLE (10m) :KA-VC-RC10

REMOTE CONTROL CABLE (�0m) : POA-MC-RC30

Thepartslistedbelowareoptionallyavailable.Whenorderingthoseparts,specifytheitemnameandModelNo.tothesalesdealer.

Optional Parts

Accessories Owner’sManualQuickReferenceGuide ACPowerCord RemoteControlandBatteries VGACable SerialControlCable LensCapwithString PINCodeLabel NetworkApplication(CD-ROM) SoftCarryingCase

● Thespecificationsaresubjecttochangewithoutnotice.● LCDpanelsaremanufacturedtothehighestpossiblestandards.Eventhough99.99%ofthepixelsare

effective,atinyfractionofthepixels(0.01%orless)maybeineffectivebythecharacteristicsoftheLCDpanels.

7�

ThisprojectoriscompliantwithPJLinkStandardClass1ofJBMIA(JapanBusinessMachineandInformationSystemIndustriesAssociation).ThisprojectorsupportsallcommandsdefinedbyPJLinkClass1andisverifiedconformancewithPJLinkStandardClass1.

ForPJLinkpassword,seepage49ontheowner’smanual“NetworkSet-upandOperation.”

ProjectorInput

RGB

Computer1(Analog)

RGB(AVHDCP)

RGB(PCdigital)

Component

RGB(Scart)

Auto

PJLinkInput

RGB2

RGB1

DIGITAL2

DIGITAL1

RGB3

RGB4

Video

S-video

VIDEO2

VIDEO3

VIDEO1

NETWORK1Wired

Computer1(Digital)

Computer2

Video

PJLinkisaregisteredtrademarkofJBMIAandpendingtrademarkinsomecountries.

Pj Link Notice

Wireless NETWORK2

Parameter

12

11

32

31

13

14

22

23

21

51

52

Appendix

75

Terminal : Mini DIN 8-PINSERVICE PORT CONNECTOR

Vcc-Data+DataGround

1��

2

3 4

1�

COMPUTER IN � /COMPONENT IN /MONITOR OUT (ANALOG)Terminal: Analog RGB (Mini D-sub 15 pin)

5 123410 9 678

15 14 13 1112

Configurations of Terminals

RX–TX+TX–RX+

��

87654321

5678

1

USB CONNECTOR (Series B)

LAN TERMINAL

-----

---------------

DVI-I TERMINAL (DIGITAL/ANALOG)

1917

21018

31119

41220

51321

61422

71523

81624

C1 C2

C3

C5

C4

T.M.D.S.Data2–

NoConnect

T.M.D.S.Data2+

NoConnectT.M.D.S.Data2Shield

DDCClockDDCDataNoconnect

1

5

�

��

678

T.M.D.S.Data1–

NoConnect

T.M.D.S.Data1+


+5VPowerGround(for+5V)HotPlugDetect

9

1�

10

1�11

1�1516

T.M.D.S.Data0–

NoConnect

T.M.D.S.Data0+


T.M.D.S.ClockShieldT.M.D.S.Clock+T.M.D.S.Clock–

17

�1

18

�019

��

AnalogRedInput

AnalogGround(R/G/B)

AnalogGreenInput

AnalogHoriz.syncAnalogBlueInput

C1

C5

C�

C�C�

12

3458 7 6

Appendix

Red(R/Cr)Input/ROutput

Ground(Horiz.sync.)

Green(G/Y)Input/GOutput

-----Blue(B/Cb)Input/BOutput

Ground(Red)Ground(Green)Ground(Blue)

1

5

�

��

678

+5VPower/---

Horiz.sync.Input(CompositeH/Vsync.)

Ground(Vert.sync.)

DDXData/---Ground

Vert.sync.DDCClock/---

9

1�

10

1�11

1�15

RXD----------GND

-----

----------

1��

5678

TXD

76

Appendix

WritedownthePINcodenumberinthecolumnbelowandkeepitwiththismanualsecurely.Ifyouforgotorlostthenumberandunabletooperatetheprojector,contacttheservicestation.

PIN Code Number Memo

FactorydefaultsetNo:1234*

FactorydefaultsetNo:4321*

Putthelabelbelow(supplied)oninaprominentplaceoftheprojector'sbodywhileitislockedwithaPINcode.

WhiletheprojectorislockedwiththePINcode.

PIN Code Lock No .

Logo PIN Code Lock No .

*Should thefour-digitnumberbechanged,thefactorysetnumberwillbeinvalid.

Appendix

77

Appendix

Dimensions

10.2

(257

.5)

13.15(334)

2.0(

51.3

)

3.17(80.5)

3.1(

78)

5.1(129.0) 5.2(132.0)

2.8(

70.5

)

5.1(129.0) 4.4(112.5)

5.5(

140.

0)

3.6(

91.3

)

Unit:inch(mm)

ScrewHolesforCeilingMountScrew:M4Depth:0.472(12.0)

KF3AC-A

SANyO Electric Co ., Ltd .

Documents

PLC-XU115 - Panasonic · MODEL PLC-XU115 Owner’s Manual Network Supported Wireless LAN IEEE802.11b/g Wired LAN 100-Base-TX/10-Base-T Memory Viewer SD Card Memory Viewer * Refer