Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
LM SERIES MICRO PLC
PLC SELECTION GUIDE
YUEQING YING'S IMPORT & EXPORT CO., LTD
LM SERIES PLC CONTENT CPU Modules LM3104 (8 Channels DC24V DI, 6 Channels Transistor DO) -------------------------------------------1 LM3105 (8 Channels DC24V DI, 6 Channels Relay DO) ------------------------------------------------3 LM3106 (14 Channels DC24V DI, 10 Channels Transistor DO) ----------------------------------------5 LM3106A (Only for Motion Control,14 Channels DC24V DI, 10 Channels Transistor DO) -------7 LM3107 (14 Channels DC24V DI, 10 Channels Relay DO) ---------------------------------------------9 LM3108 (24 Channels DC24V DI, 16 Channels Transistor DO)---------------------------------------11 LM3109 (24 Channels DC24V DI, 16 Channels Relay DO)--------------------------------------------13 Expansion Digital I/O Modules LM3210 (8 Channels DI,DC24V ) -------------------------------------------------------------------------15 LM3211 (8 Channels DI,AC220V ) ------------------------------------------------------------------------16 LM3212 (16 Channels DI,DC24V) ------------------------------------------------------------------------17 LM3220 (8 Channels Transistor DO,DC24V) ------------------------------------------------------------18 LM3221 (16 Channels Transistor DO,DC24V) ----------------------------------------------------------19 LM3222 (8 Channels Relay DO,DC24V) -----------------------------------------------------------------20 LM3223 (8 Channels Relay DO,DC24V) -----------------------------------------------------------------21 LM3230 (DI 4×DC24V+DO 4×DC24V Transistor) -----------------------------------------------------22 LM3231 (DI 4×DC24V+DO 4×DC24V Relay)-----------------------------------------------------------24 Expansion Analog I/O Modules LM3310 (4 Channels Analog Input) -----------------------------------------------------------------------26 LM3311 (4 Channels Thermal Couple Input) ------------------------------------------------------------27 LM3312 (4 Channels RTD Input) -------------------------------------------------------------------------28 LM3313 (8 Channels Analog Input) ----------------------------------------------------------------------29 LM3314 (8 Channels NTC Input) -------------------------------------------------------------------------30 LM3320 (2 Channels Analog Output) ---------------------------------------------------------------------31 Communication Modules LM3401 (Profibus-DP Slave Station Module) ------------------------------------------------------------32 LM3403 (Ethernet Module) ---------------------------------------------------------------------------------33
CPU Module LM3104 (8CH DI, 6CH DO)
• Rated Voltage: 24V DC
• 8 Channels DC24V DI, 6 Channels Transistor DO
• Program Memory Capacity: 28KB
• Interrupt Input: 2 Points
• Expandable I/O: 2 Modules
CPU Features
Local I/O 8 Channels DC24V DI, 6 Channels Transistor DO
Expandable I/O 2 modules (unable to connect Ethernet modules)
High-speed counter Monophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output 1 point 20KHz
Pulse catch 2 points
Interrupt input 2 points
Analog potentiometer 2, value setting range 0~255
User program memory
capacity 28K bytes
Retain area N/A
Input data memory 256 bytes
Output data memory 256 bytes
Mid-variables memory 1K bytes
Global memory 2K bytes
Password Yes
Real-time clock N/A
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65μs (Basic instruction)
Power Supply Specifications
Power supply 24V DC
Allowed range 21V DC~27V DC
Current consumption (MAX) 1300mA
Output voltage 24V DC
Allowed range 22.8V DC~25.2V DC
1
2
+24VDC (To expansion bus) 300mA
+24V DC (To the outside) 300mA Current output
+5V DC (To expansion bus) 800mA
Short circuit protection 400mA, 24VDC output
Communication Features
Communication interface 1 RS-232 (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC, allowed minimum current 3mA
Logic 0 signal 0~5V DC, allowed maximum current 1mA
Input delay time <0.6ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Output Features
Output type Transistor
Output voltage 24V DC
Allowed range 20.4V DC~28.8V DC
Transistor conduction voltage drop <0.5V (Output logic “1”, current 1A)
Contact impedance <0.2Ω
Logic “1” single point output maximum
current 1A
Logic “0” maximum leaking current 1mA
Common end output current total <4A
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Response time (status “0” to “1” or
“1” to “0”)
Common output <1ms
High-speed pulse output<10us
Physical Features
Dimensions 125mm(L)×90mm(W)×70mm (H)
Weight <350g
CPU Module LM3105 (8CH DI, 6CH DO)
• Rated Voltage: 220V AC
• 8 Channels DC24V DI, 6 Channels Relay DO
• Program Memory Capacity: 28KB
• Interrupt Input: 2 Points
• Expandable I/O: 2 Modules
CPU Features
Local I/O 8 Channels DC24V DI, 6 Channels Relay DO
Expandable I/O 2 modules (unable to connect Ethernet modules)
High-speed counter Monophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output N/A
Pulse catch 2 points
Interrupt input 2 points
Analog potentiometer 2, value setting range 0~255
User program memory
capacity 28K bytes
Retain area N/A
Input data memory 256 bytes
Output data memory 256 bytes
Mid-variables memory 1K bytes
Global memory 2K bytes
Password Yes
Real-time clock N/A
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65μs (Basic instruction)
Power Supply Specifications
Power supply 220V AC@50Hz
Allowed range 187V AC~242V AC@50Hz
Current consumption (MAX) 120mA
Output voltage 24V DC
Allowed range 22.8V DC~25.2V DC
+24VDC (To expansion bus) 260mA
+24V DC (To the outside) 200mA Current output
+5V DC (To expansion bus) 800mA
Short circuit protection 400mA, 24VDC output
Communication Features
Communication interface 1 RS-232 (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC, allowed minimum current 3mA
Logic 0 signal 0~5V DC, allowed maximum current 1mA
Input delay time <0.6ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Output Features
Output type Relay
Output voltage 24V DC or 24 V AC ~230V AC
Allowed range 5V DC~30V DC or 5V AC~250V AC
Common end output current total <10A
Output switch capacity 2A, resistance load
Minimum load 10mA (contact voltage 5VAC or 5VDC)
Over current protection N/A
Contact impedance <0.2Ω
Isolation group 2 groups
Isolation voltage between coil and
contact 3000VAC, 1 minute, leakage current 1mA
Isolation voltage between contacts 750VAC, 1 minute, leakage current 1mA
Isolation resistance (minimum) 100MΩ (under 500VDC) between contacts
or between coil and contact
Contact switch delay time <10ms
Contact switch frequency
(maximum) 1Hz
Relay mechanical life No load: over 10,000,000 times; Rated
Resistive load 2A: over 100,000 times
Physical Features
Dimensions 125mm(L)×90mm(W)×70mm (H)
Weight <350g
CPU Module LM3106 (14CH DI, 10CH DO)
• Rated Voltage: 24V DC
• 14 Channels DC24V DI, 10 Channels Transistor DO
• Program Memory Capacity: 28KB/120KB
• Interrupt Input: 3 Points
• Expandable I/O: 4 Modules
CPU Features
Local I/O 14 Channels DC24V DI, 10 Channels Transistor DO
Expandable I/O 4 modules
High-speed counter Monophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output 2 point 20KHz
Pulse catch 3 points
Interrupt input 3 points
Analog potentiometer 2, value setting range 0~255
User program memory
capacity 28K bytes/120K bytes
Retain area 512 bytes/6K bytes
Input data memory 512 bytes
Output data memory 512 bytes
Mid-variables memory 8K bytes
Global memory 24K bytes
Password Yes
Real-time clock Built-in
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65μs (Basic instruction)
Power Supply Specifications
Power supply 24V DC
Allowed range 21V DC~27V DC
Current consumption (MAX) 1300mA
Output voltage 24V DC
Allowed range 22.8V DC~25.2V DC
+24VDC (To expansion bus) 300mA Current output
+24V DC (To the outside) 300mA
+5V DC (To expansion bus) 800mA
Short circuit protection 400mA, 24VDC output
Communication Features
Communication interface 1 RS-232 (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC
Logic 0 signal 0~5V DC
Input delay time <0.6ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Output Features
Output type Transistor
Output voltage 24V DC
Allowed range 20.4V DC~28.8V DC
Transistor conduction voltage drop <0.5V (Output logic “1”, current 1A)
Contact impedance <0.2Ω
Logic “1” single point output maximum
current 1A
Logic “0” maximum leaking current 1mA
Common end output current total <4A
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Response time (status “0” to “1” or
“1” to “0”)
Common output <1ms
High-speed pulse output<10us
Physical Features
Dimensions 125mm(L)×90mm(W)×70mm (H)
Weight <350g
CPU Module LM3106A (14CH DI, 10CH DO)
• Only for Motion Control
• Rated Voltage: 24V DC
• 14 Channels DC24V DI, 10 Channels Transistor DO
• Pulse output: 4 points, 2 can be PWM (100KHz) or
PTO (50KHz), 2 can be direction control
CPU Features
Local I/O 14 Channels DC24V DI, 10 Channels Transistor DO
Expandable I/O 4 modules
High-speed counter Monophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output 4 points (2 can be PWM (100KHz) or PTO (50KHz);
2 can be direction control)
Pulse catch 3 points
Interrupt input 3 points
Analog potentiometer 2, value setting range 0~255
User program memory
capacity 28K bytes/120K bytes
Retain area 512 bytes/6K bytes
Password Yes
Real-time clock Built-in
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65μs (Basic instruction)
Power Supply Specifications
Power supply 24V DC
Allowed range 21V DC~27V DC
Current consumption (MAX) 1300mA
Output voltage 24V DC
Allowed range 22.8V DC~25.2V DC
+24VDC (To expansion bus) 300mA
+24V DC (To the outside) 300mA Current output
+5V DC (To expansion bus) 800mA
Short circuit protection 400mA, 24VDC output
Communication Features
Communication interface 1 RS-232 (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC, allowed minimum current 3mA
Logic 0 signal 0~5V DC, allowed maximum current 1mA
Input delay time <0.6ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Output Features
Output type Transistor
Output voltage 5~24V DC
Allowed range 4.5V DC~28.8V DC
Transistor conduction voltage drop <0.5V (when load voltage is +5V)
Contact impedance <0.2Ω
Logic “1” single point output
maximum current 0.2A
Logic “0” maximum leaking current 0.1mA
Common end output current total <0.5A
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Response time (status “0” to “1”
or “1” to “0”)
Common output (over 15mA):
OFF→ON: < 0.1ms; ON→OFF: <1ms
High-speed pulse output (over 15mA):
OFF→ON: <0.5μs; ON→OFF: <1.5μs
Physical Features
Dimensions 125mm(L)×90mm(W)×70mm (H)
Weight <350g
CPU Module LM3107 (14CH DI, 10CH DO)
• Rated Voltage: 220V AC
• 14 Channels DC24V DI, 10 Channels Relay DO
• Program Memory Capacity: 28KB/120KB
• Interrupt Input: 3 Points
• Expandable I/O: 4 Modules
CPU Features
Local I/O 14 Channels DC24V DI, 10 Channels Relay DO
Expandable I/O 4 modules
High-speed counter Monophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output N/A
Pulse catch 3 points
Interrupt input 3 points
Analog potentiometer 2, value setting range 0~255
User program memory
capacity 28K bytes/120K bytes
Retain area 512 bytes/6K bytes
Input data memory 512 bytes
Output data memory 512 bytes
Mid-variables memory 8K bytes
Global memory 24K bytes
Password Yes
Real-time clock Built-in
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65μs (Basic instruction)
Power Supply Specifications
Power supply 220V AC@50Hz
Allowed range 187V AC~242V AC@50Hz
Current consumption (MAX) 120mA
Output voltage 24V DC
Allowed range 22.8V DC~25.2V DC
+24VDC (To expansion bus) 260mA Current output
+24V DC (To the outside) 200mA
+5V DC (To expansion bus) 800mA
Short circuit protection 400mA, 24VDC output
Communication Features
Communication interface 1 RS-232 (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC, allowed minimum current 3mA
Logic 0 signal 0~5V DC, allowed maximum current 1mA
Input delay time <0.6ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Output Features
Output type Relay
Output voltage 24V DC or 24 V AC ~230V AC
Allowed range 5V DC~30V DC or 5V AC~250V AC
Common end output current total <10A
Output switch capacity 2A, resistance load
Minimum load 10mA (contact voltage 5VAC or 5VDC)
Over current protection N/A
Contact impedance <0.2Ω
Isolation group 2 groups
Isolation voltage between coil and
contact 3000VAC, 1 minute, leakage current 1mA
Isolation voltage between contacts 750VAC, 1 minute, leakage current 1mA
Isolation resistance (minimum) 100MΩ between contacts or between coil
and contact (500VDC)
Contact switch delay time <10ms
Contact switch frequency
(maximum) 1Hz
Relay mechanical life No load: over 10,000,000 times; Rated
Resistive load 2A: over 100,000 times
Physical Features
Dimensions 125mm(L)×90mm(W)×70mm (H)
Weight <400g
CPU Module LM3108 (24CH DI, 16CH DO)
• Rated Voltage: 24V DC
• 24 Channels DC24V DI, 16 Channels Transistor DO
• Program Memory Capacity: 120KB
• Interrupt Input: 3 Points
• Expandable I/O: 7 Modules
CPU Features
Local I/O 24 Channels DC24V DI, 16 Channels Transistor DO
Expandable I/O 7 modules
High-speed counter Monophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output 2 point 20KHz
Pulse catch 3 points
Interrupt input 3 points
Analog potentiometer 2, value setting range 0~255
User program memory
capacity 120K bytes
Retain area 6K bytes
Input data memory 512 bytes
Output data memory 512 bytes
Mid-variables memory 8K bytes
Global memory 24K bytes
Password Yes
Real-time clock Built-in
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65μs (Basic instruction)
Power Supply Specifications
Power supply 24V DC
Allowed range 21V DC~27V DC
Current consumption (MAX) 1500mA
Output voltage 24V DC
Allowed range 22.8V DC~25.2V DC
+24VDC (To expansion bus) 400mA
+24V DC (To the outside) 400mA Current output
+5V DC (To expansion bus) 1500mA
Short circuit protection 900mA, 24VDC output
Communication Features
Communication interface 2 (RS-232 and RS-485) (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC
Logic 0 signal 0~5V DC
Input delay time <0.6ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 3 groups
Maximum Isolation Voltage 1500VAC
Output Features
Output type Transistor
Output voltage 24V DC
Allowed range 20.4V DC~28.8V DC
Transistor conduction voltage drop <0.5V (Output logic “1”, current 1A)
Contact impedance <0.2Ω
Logic “1” single point output maximum
current 1A
Logic “0” maximum leaking current 1mA
Common end output current total <4A
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Response time (status “0” to “1” or
“1” to “0”)
Common output <1ms
High-speed pulse output<10us
Physical Features
Dimensions 200mm(L)×90mm(W)×70mm (H)
Weight <480g
CPU Module LM3109 (24CH DI, 16CH DO)
• Rated Voltage: 220V AC
• 24 Channels DC24V DI, 16 Channels Relay DO
• Program Memory Capacity: 120KB
• Interrupt Input: 3 Points
• Expandable I/O: 7 Modules
CPU Features
Local I/O 24 Channels DC24V DI, 16 Channels Relay DO
Expandable I/O 7 modules
High-speed counter Monophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output N/A
Pulse catch 3 points
Interrupt input 3 points
Analog potentiometer 2, value setting range 0~255
User program memory
capacity 120K bytes
Retain area 6K bytes
Input data memory 512 bytes
Output data memory 512 bytes
Mid-variables memory 8K bytes
Global memory 24K bytes
Password Yes
Real-time clock Built-in
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65μs (Basic instruction)
Power Supply Specifications
Power supply 220V AC@50Hz
Allowed range 187V AC~242V AC@50Hz
Current consumption (MAX) 200mA
Output voltage 24V DC
Allowed range 22.8V DC~25.2V DC
+24VDC (To expansion bus) 320mA
+24V DC (To the outside) 400mA Current output
+5V DC (To expansion bus) 1300mA
Short circuit protection 900mA, 24VDC output
Communication Features
Communication interface 2 (RS-232 and RS-485) (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC, allowed minimum current 3mA
Logic 0 signal 0~5V DC, allowed maximum current 1mA
Input delay time <0.6ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 3 groups
Maximum Isolation Voltage 1500VAC
Output Features
Output type Relay
Output voltage 24V DC or 24 V AC ~230V AC
Allowed range 5V DC~30V DC or 5V AC~250V AC
Common end output current total <10A
Output switch capacity 2A, resistance load
Minimum load 10mA (contact voltage 5VAC or 5VDC)
Over current protection N/A
Contact impedance <0.2Ω
Isolation group 4 groups
Isolation voltage between coil and
contact 3000VAC, 1 minute, leakage current 1mA
Isolation voltage between contacts 750VAC, 1 minute, leakage current 1mA
Isolation resistance (minimum) 100MΩ between contacts or between coil
and contact under 500VDC
Contact switch delay time <10ms
Contact switch frequency
(maximum) 1Hz
Relay mechanical life No load: over 10,000,000 times; Rated
Resistive load 2A: over 100,000 times
Physical Features
Dimensions 200mm(L)×90mm(W)×70mm (H)
Weight <550g
DI Module LM3210 (8CH DI)
• Input channel: 8
• Rated Voltage: 24V DC
Input Features
Input channel 8
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC, allowed minimum current 3mA
Logic 0 signal 0~5V DC, allowed maximum current 1mA
Input delay time <10ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Physical Features
Dimensions 50mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 40mA Power
Consumption +5VDC (Provided by
expansion bus) 60mA
DI Module LM3211 (8CH DI)
• Input channel: 8
• Rated Voltage: 220V AC
Input Features
Input channel 8
Input voltage rated value 220V AC
Allowed range 164V AC~264V AC (50/60Hz)
Logic 1 signal (Minimum) 164V AC
Logic 0 signal (Maximum) 80V AC
Input delay time <20ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 8 groups
Maximum Isolation Voltage 1500VAC
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 0mA Power
Consumption +5VDC (Provided by
expansion bus) 60mA
DI Module LM3212 (16CH DI)
• Input channel: 16
• Rated Voltage: 24V DC
Input Features
Input channel 16
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC, allowed minimum current 3mA
Logic 0 signal 0~5V DC, allowed maximum current 1mA
Input delay time <10ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 4 groups
Maximum Isolation Voltage 1500VAC
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 80mA Power
Consumption +5VDC (Provided by
expansion bus) 90mA
DO Module LM3220 (8CH DO)
• Input channel: 8
• Rated Voltage: 24V DC
Output Features
Output Channel 8
Output type Transistor
Output voltage 24V DC
Allowed range 20.4V DC~28.8V DC
Transistor conduction voltage drop <0.5V (Output logic “1”, current 1A)
Logic 1 maximum output current 1A
Logic 0 maximum leakage current 1mA
Common end output current total <4A
Surge current <8A, 100ms
Contact impedance <0.2Ω
Built-in protection The recoverable fuse for each group:
8A, 25
Status "0" to "1" <1ms Response
time Status "1" to "0" <1ms
Isolation mode Photocoupler isolation
Isolation group 2 groups
Maximum Isolation Voltage 1500VAC
Physical Features
Dimensions 50mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) Depend on actual load Power
Consumption +5VDC (Provided by
expansion bus) 100mA
DO Module LM3221 (16CH DO)
• Input channel: 16
• Rated Voltage: 24V DC
Output Features
Output Channel 16
Output type Transistor
Output voltage 24V DC
Allowed range 20.4V DC~28.8V DC
Transistor conduction voltage drop <0.5V (Output logic “1”, current 1A)
Logic 1 maximum output current 1A
Logic 0 maximum leakage current 1mA
Common end output current total <4A
Surge current <8A, 100ms
Contact impedance <0.2Ω
Built-in protection The recoverable fuse for each group:
8A, 25
Status "0" to "1" <1ms Response
time Status "1" to "0" <1ms
Isolation mode Photocoupler isolation
Isolation group 4 groups
Maximum Isolation Voltage 1500VAC
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) Depend on actual load Power
Consumption +5VDC (Provided by
expansion bus) 180mA
DO Module LM3222 (8CH DO)
• Input channel: 8
• Rated Voltage: 24V DC or 220V AC
Output Features
Output Channel 8
Output type Relay
Output voltage 24V DC or 24 V AC ~230V AC
Allowed range 5V DC~30V DC or 5V AC~250V AC
Common end output current total <10A
Output switch capacity 2A, resistance load
Minimum load 10mA (contact voltage 5VAC or 5VDC)
Over current protection N/A
Contact impedance <0.2Ω
Isolation group 2 groups
Isolation voltage between coil and
contact 3000VAC, 1 minute, leakage current 1mA
Isolation resistance (minimum) 100MΩ between contacts or between coil
and contact under 500VDC
Contact switch delay time <10ms
Contact switch frequency
(maximum) 1Hz
Relay mechanical life No load: over 10,000,000 times; Rated
Resistive load 2A: over 100,000 times
Physical Features
Dimensions 50mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 40mA
+24VDC (External supply) Depend on actual load Power
Consumption +5VDC (Provided by
expansion bus) 60mA
DO Module LM3223 (16CH DO)
• Input channel: 16
• Rated Voltage: 24V DC or 220V AC
Output Features
Output Channel 16
Output type Relay
Output voltage 24V DC or 24 V AC ~230V AC
Allowed range 5V DC~30V DC or 5V AC~250V AC
Common end output current total <10A
Output switch capacity 2A, resistance load
Minimum load 10mA (contact voltage 5VAC or 5VDC)
Over current protection N/A
Contact impedance <0.2Ω
Isolation group 4 groups
Isolation voltage between coil and
contact 3000VAC, 1 minute, leakage current 1mA
Isolation voltage between contacts 750VAC, 1 minute, leakage current 1mA
Isolation resistance (minimum) 100MΩ between contacts or between coil
and contact under 500VDC
Contact switch delay time <10ms
Contact switch frequency
(maximum) 1Hz
Relay mechanical life No load: over 10,000,000 times; Rated
Resistive load 2A: over 100,000 times
Physical Features
Dimensions 50mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 40mA
+24VDC (External supply) Depend on actual load Power
Consumption +5VDC (Provided by
expansion bus) 60mA
DI/DO Module LM3230 (4CH DI, 4CH DO)
• Input channel: 4
• Output channel: 4
• Input Rated Voltage: 24V DC
• Output Rated Voltage: 24V DC
Input Features
Input channel 4
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC, allowed minimum current 3mA
Logic 0 signal 0~5V DC, allowed maximum current 1mA
Input delay time <10ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 1 group
Maximum Isolation Voltage 1500VAC
Output Features
Output Channel 4
Output type Transistor
Output voltage 24V DC
Allowed range 20.4V DC~28.8V DC
Surge current <8A, 100ms
Contact impedance <0.2Ω
Built-in protection The recoverable fuse for each group:
8A, 25
Transistor conduction voltage drop <0.5V (Output logic “1”, current 1A)
Logic 1 maximum output current 1A
Logic 0 maximum leakage current 1mA
Status "0" to "1" <1ms Response
time Status "1" to "0" <1ms
Isolation mode Photocoupler isolation
Isolation group 1 group
Maximum Isolation Voltage 1500VAC
Physical Features
Dimensions 50mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) Input 20mA, output depend on
actual load
Power
Consumption
+5VDC (Provided by
expansion bus) 90mA
DI/DO Module LM3231 (4CH DI, 4CH DO)
• Input channel: 4
• Output channel: 4
• Input Rated Voltage: 24V DC
• Output Rated Voltage: 24V DC or 220V AC
Input Features
Input channel 4
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC~30V DC
Logic 1 signal 15~30V DC, allowed minimum current 3mA
Logic 0 signal 0~5V DC, allowed maximum current 1mA
Input delay time <10ms (Rated input voltage)
Isolation mode Photocoupler isolation
Isolation group 1 group
Maximum Isolation Voltage 1500VAC
Output Features
Output Channel 4
Output type Relay
Output voltage 24V DC or 24 V AC ~230V AC
Allowed range 5V DC~30V DC or 5V AC~250V AC
Common end output current total <10A
Output switch capacity 2A, resistance load
Minimum load 10mA (contact voltage 5VAC or 5VDC)
Over current protection N/A
Contact impedance <0.2Ω
Isolation group 1 group
Isolation voltage between coil and
contact 3000VAC, 1 minute, leakage current 1mA
Isolation voltage between contacts 750VAC,1 minute; leakage current 1mA
Isolation resistance (minimum) 100MΩ between contacts or between coil
and contact under 500VDC
Contact switch delay time <10ms
Contact switch frequency
(maximum) 1Hz
Relay mechanical life No load: over 10,000,000 times; Rated
Resistive load 2A: over 100,000 times
Physical Features
Dimensions 50mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 20mA
+24VDC (External supply) Input 20mA, output depend on
actual load
Power
Consumption
+5VDC (Provided by
expansion bus) 90mA
AI Module LM3310 (4CH Analog Input)
• Input channel: 4
• Input precision: 0.5% full range, at 25
• Sampling refresh time (every 4 channels): 6ms
Input Features
Input channel 4
Voltage 0~10V
Current 0~20mA Input Ranges
Current 4~20mA
Input precision (monopole) 0.5% full range, at 25
Input impedance >1MΩ (Voltage), 500Ω (Current)
Maximum input current <30mA
Maximum input voltage <30V
Temperature drift ±100ppm/
Isolation mode Isolation between input and internal circuit;
no isolation between channels
Maximum Isolation Voltage 1500VAC
Sampling refresh time 6ms (every 4 channels)
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 30mA Power
Consumption +5VDC (Provided by
expansion bus) 60mA
AI Module LM3311 (4CH Thermal Couple Input)
• Input channel: 4
• Input precision: 0.1% full range, at 25
• Sampling refresh time (every 4 channels): 450ms
• Temperature resolution: 0.1
Input Features
Input channel 4
Input signal J, K, T, N, E, R, S, B type thermocouple,
-80~80mV
Input precision 0.1% full range, at 25
Temperature resolution 0.1
Cold end error ±1.5
Input impedance >1MΩ
NMMRR Better than 60dB@50Hz
CMMRR Better than 80dB@50Hz
CM voltage Not more than 60V
Channel maximum voltage resisting 30VDC
Temperature drift ±100ppm/
Isolation mode Isolation between input and internal
circuit, no isolation between channels
Maximum Isolation Voltage 1500VAC
Sampling refresh time 500ms (every 4 channels)
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 30mA Power
Consumption +5VDC (Provided by
expansion bus) 80mA
AI Module LM3312 (4CH RTD Input)
• Input channel: 4
• Input precision: ±1, at 25
• Sampling refresh time (every 4 channels): 450ms
Input Features
Input channel 4
Input type Cu50, Pt100
Cu50 (-50-140.1)
Cu50 (-50-150)
Pt100 (-150-157.2) Input Ranges
Pt100 (-150-619.6)
Input precision (monopole) ±1, at 25
Temperature drift ±100ppm/
Isolation mode Isolation between input and internal circuit,
no isolation between channels
Maximum Isolation Voltage 1500VAC@ (50~60Hz)
NMMRR Better than 60dB@50HZ
CMMRR (50Hz, AC 250Vrms) Better than 80dB
Sampling refresh time 450ms (every 4 channels)
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 50mA Power
Consumption +5VDC (Provided by
expansion bus) 60mA
AI Module LM3313 (8CH Analog Input)
• Input channel: 8
• Input precision: 0.5% full range, at 25
• Sampling refresh time (every 8 channels): <15ms
Input Features
Input channel 8
Voltage -10~10V Input Ranges
Current -20~20mA
Input precision 0.5% full range, at 25
Input impedance >1MΩ (Voltage), 500Ω (Current)
Maximum input current <30mA
Maximum input voltage <15V
Temperature drift ±100ppm/
Isolation mode Isolation between input and internal circuit;
no isolation between channels
Maximum Isolation Voltage 1000VDC
Sampling refresh time <15ms
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 35mA Power
Consumption +5VDC (Provided by
expansion bus) 100mA
AI Module LM3314 (8CH NTC Input)
• Input channel: 8
• Input precision: 0.2% full range, at 25
• Sampling refresh time (every 8 channels): 1s
Input Features
Input channel 8
NTC type R = 10K at 25; B optional
Input precision 0.2% full range, at 25
Temperature resolution 0.1
Temperature drift ±100ppm/
Isolation mode Isolation between input and internal circuit,
no isolation between channels
Maximum Isolation Voltage 1500VAC
NMMRR Better than 60dB@50HZ
CMMRR (50Hz, AC 50Vrms) Better than 80dB
Sampling refresh time 1s (every 8 channels)
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 40mA Power
Consumption +5VDC (Provided by
expansion bus) 100mA
AO Module LM3320 (2CH Analog Output)
• Output channel: 2
• Output precision: 2% full range (0~55)
• Typical precision: 0.5% full range, at 25
Output Features
Output channel 2
Voltage 0~10V Output range
Current 0~20mA
Precision (0~55) 2% full range
Typical precision 0.5% full range, at 25
Voltage output <=10us Setup time
Current output <=10us
Voltage Minimum 2000Ω Drive capacity
Current Maximum 600Ω
Isolation mode Photocoupler isolation
Maximum Isolation Voltage 1500VAC
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 80mA Power
Consumption +5VDC (Provided by
expansion bus) 60mA
Profibus-DP Slave Station Module LM3401
Communication Functions
No. of communication port 1
Interface type RS - 485
Maximum Isolation Voltage 1500VAC
PROFIBUS-DP baud rate
9.6, 19.2, 45.45, 93.75, 187.5, 500
kbps and 1, 1.5, 3, 6, 12Mbps
(auto setting)
Station address setup 0-126 (set by switch)
Maximum No. of stations for each section 32
Maximum No. of stations for each network 126
Isolation mode Photocoupler isolation
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 20mA Power
Consumption +5VDC (Provided by
expansion bus) 120mA
Ethernet Module LM3403
Communication Functions
No. of communication port 1 (communicating with only one MODBUS/TCP
master station at the same time)
Interface type Ethernet (RJ45)
Protocol type MODBUS/TCP slave station
Items required for
configuration
IP address (default value as 172.20.45.160), subnet
mask, gateway IP, read/write data length
(Note: MAC_Address does not require configuration)
Baud rate Baud rate
Input/output area capacity Maximum 200 bytes each
Maximum No. of stations
for each network Depending on configuration software
Physical Features
Dimensions 75mm(L)×90mm(W)×70mm (H)
Weight <200g
+24VDC (Provided by
expansion bus) 0mA
+24VDC (External supply) 0mA Power
Consumption +5VDC (Provided by
expansion bus) 80mA
LM SERIES MICRO PLC Main Features:
·Good control functions.
·Flexible system configuration.
·Compact size.
·Easy to install.
·Power-off protection.
·Powerful analog processing capability.
·A plenty of commands.
·Practical off-line simulation.
·General Human-Machine-Interface (HMI).
·Standard programming language.
·Good communication function.
YUEQING YING'S IMPORT & EXPORT CO., LTD
ADD: XINGUANG INDUSTRY ZONE, LIUSHI, YUEQING, ZHEJIANG, 325604, CHINA TEL: 0086-577-62791815 FAX: 0086-577-62791825 E-mail:[email protected] Http://www.yingselectric.com