PLC MELSEC-F FXSeriesFunction Ingles

Mitsubishi Micro PLC

FX series introduction

3Mitsubishi micro PLCs play an active role in everyday life in addition to factory manufacturing.

4The PLC controls fans, motors, lamps, and buzzers according to pre-programmed conditions via switches and sensor signals.

5PLC outputs ON/OFF signals to buzzers or lamps depending on the input signals from switches or sensors. The ON/OFF output conditions are freely determined by program.

PLC operation is determined by program.

Overwhelming cost advantage

6

Separate arrangements for relay, timer and countersWiring labor

The same control is possible with just built-in functions

Conventional relay control PLC

Ease and freedom of control

7

Edit and overwrite programs

Easy to understand visual ladder program

Programming freedom

Easily determine machine operation

High reliability product, easy installation

WireSTEP1

0LWVXELVKL0LFUR3/&0LWVXELVKL0LFUR3/&0LWVXELVKL0LFUR3/&0LWVXELVKL0LFUR3/&VLPSOHVWHSVVLPSOHVWHSVVLPSOHVWHSVVLPSOHVWHSV

8

Mitsubishi micro PLC controller can be used right out of the box.

ProgramSTEP2

VerifySTEP3

\54,000 \42,000

Highly recommended! FX series lineup

9

\22,000

\34,000

\54,000 \42,000

Standard prices (tax not included)

\46,000

Why it is so popular

30 years history!Over 1M units sold worldwide!

Adopted into many fields!Unparalleled product guarantee and support!

10

Simple, easy!Convenient functionality all in one!

Extensive lineup, from standard to high-end.

Significant cost savings using built-in functions and extensions

Theres always a product that fits to the requirements.

Most control is possiblewith just the main unit!

Add temperature controloption!

Add options for specific applications

12

Add positioning option! Numeric data handling!

Manufacturing example with PLC

13

Mix FXFreely program motor


14

Freely program motor operation conditions and timing

Small, slim PLC can fit into tight installation spaces

Motor

FX

Open/close FX

Set filling time in 1-100ms units


15

FX

Set filling time in 1-100ms units with internal timers.

For PLCs with built-in potentiometers, timer setting can be changed with a screwdriver

Solenoid valve

Stop FXNever lose short input signals with


16

FX

Sensor

Never lose short input signals with the built-in pulse catch function(FX1S,FX3G:10s, FX3U/FX3UC:5s)

Use interrupt inputs for high speed sensor signal reading to immediately stop conveyer belt

Inform FXFreely program buzzer sound


17

FX

Buzzer LampFreely program buzzer sound and timing according to input condition

Tran-sport FX

Simple and easy conveyer belt


18

FX

Motor

Simple and easy conveyer belt control using motor control, sensor input, timer, and counter.

Control stepping motor with justPLC main unit using pulse output command or positioning command with speed control function.

What is Mitsubishi GOT?

Mitsubishi GOT (Graphic Operation Terminal) is a LCD touch screen HMI for the PLC.


Mitsubishi GOT

19

HMI for the PLC.Using exclusive PC software, it is easy to make custom screens according to the application.

Convenient FX PLC built-in functions and options for accurate and stable manufacturing

20

Rotation speed control

(inverter control)

FX

Freely control the speed of a motor using an inverterFX Mitsubishi


21

3 phase motor

motor using an inverter

Low cost inverter control with analog or communication option

One communication option can control speed and monitor revolutions of up to 8 inverters

FX Mitsubishi inverter

What is an inverter?

Mitsubishi inverter is a machine that can freely and efficiently control the rotating speed of a motor

Flow rate measurement

and filling control

(built-in high speed counter)

FX

Exact fill amount measurement possible using flow meters high


22

Flow meter

FX

possible using flow meters high speed signal

High speed counting and numerical comparison instructions are built into the PLC, so the main unit can immediately issue a stop command when the exact amount has been filled.

High speed control is cheap, since its built into the PLC, no need for an additional unit

Temperature measurement

and heater control

(temperature option)

FX

Measure oven internal temperature, and control the heater accordingly


23

Temperature sensor

option) and control the heater accordingly

Wide range of analog and temperature control options. PLCs built-in PID instruction can use feedback control to reach target value.

No programming required, easy temperature, voltage input/output FX option available

FX

Accurate repetition start/stop

(AC servo control)

FX

With FX3, easily control AC servo with just the main unit.

FX(transistor output type)

Mitsubishi AC servo


24

Servo motor

with just the main unit.Positioning instruction is standard built-in!

Positioning can be performed by setting positioning operations in the PLC programming software and then simply invoking the dedicated instruction (DTBL).What is an AC servo?

Mitsubishi AC servos control a motors rotation speed and number of revolutions while managing how much it actually moves.Therefore, it can control motors with high speed and accuracy.

Factory awareness with equipment data exchange

25

Network(Ethernet)

GOT

GT14,GT16 models can monitor production data and issue commands remotely with Ethernet


Information display

Mitsubishi GOT

26

FX

Production and quality data can be sent and received to/from upper level system with Ethernet option

remotely with Ethernet connection

Ethernet

CC-Link

RS-232C

FX

Production data from FX can also be sent with email.

Ethernet

FXField

NetworkCC-Link


27

CC-Link

RS-232C

What is CC-Link?

CC-Link is a high speed field network that can handle control and process data at the same time. Make long distance, reduced wiring connections between PLCs and inside the cabinet.

FXFX

Reduced wiring between PLCs and master/slave communication transfer

Perform program maintenance on a remote PLC from a supporting master station PLC

CC-Link

Ethernet

FX


Communication FX

28

RS-232C

FX

Printer

Bar code reader

FX

Easily add a RS-232C or RS-485 communication board

Easily connect a bar code reader or printer with the RS instruction dedicated for data communication.

DataLogging


465423186761315468646533

130339214867

29

FX

Connect a CF card option and collect manufacturing and quality data.

Collect data with just the main unit using the dedicated LOGR instruction and save internally in the PLC or in option memory.

CF card

774623834996536248444784987560378522

645598257844865931565615

992157330048

Control the speed of several motors with inverters

Monitor or change motor speed with FX inverter communication

Using FX is recommended

30

Speed control and monitor of several inverters with one low-cost communication option

Monitor or change conveyer speed and inverter parameters using dedicated inverter instructions

Connect up to 8 units with 1ch communication option

Inverter control by analog output is also easy

Control liquid filling and mixing speed

Measure flow rate and temperature, mix with a motor, and control valve and heater


31

FX3 PLCs are complete with easy liquid control functions

Control the speed of the mixing inverter

Control liquid filling with PLC built-in high speed counters

Control heater and temperature with temperature sensor and temperature control option

High precision transport and drill control

Servo control with FX built-in positioning function or options


32

FX PLC is complete with built-in positioning functions! Perform positioning operations with just the main unit.

Built-in positioning functionEasily program 3 axis, 100kHz pulse output control

with built-in positioning function.

High speed, high precision control200kHz and 1MHz pulse output option andSSCNETIII fiber optic option (see P19) available.

Collect production, quality, and maintenance data

Connect the CF card option and save collected data in CSV format


33

Easy data collection when the card adapter is connected to FX3U/FX3UC

Save up to 32,767 lines of data from 254 different devices in CSV format

PLC can read the data stored in the CF card

Automatic start new file and delete old file when data is full

Decentralized control of large and mid-scale production lines

Control individual machines with FX while commands and information are managed by the connect CC-link master


34

FX3 PLC supports the reduced wiring, control and data communication field network CC-link

Connect to our Q PLCs CC-link slave in large and mid-scale production lines

FX3 PLC can also be CC-link master

Use reduced wiring inside the control panel with FX3UC built-in CC-Link/LT master type

Connect PLCs via LAN Connect FX3U/FX3UC to Ethernet, then send data and emails between the factory and office


35

Exchange data between PLCs

Read/write to the PLC from the PC side

Monitor and do maintenance from the office PC

Send an email when the machine is running out of materials or operation status requires attention

Add FX3U/FX3UC Ethernet option and connect to LAN

Were on the Web! Try it out!

Check the Mitsubishi FA equipment information service Mitsubishi Electric FA site for the latest on FX series PLC!

Mitsubishi Electric FA site homepage URL

www.MitsubishiElectric.co.jp/fa/

36

Product line upProduct manualSearch/browseSelf-study learning [e-Learning]FA training school (reservation)

[FATECMitsubishi Electric FA technical center]

Easy to use, compactMitsubishi GOT HMI

37

Smooth motor control with FX

Mitsubishi

Inverter

Easy positioning with FX

Mitsubishi

AC servo

FX Introduction

Popular FX Applications

All you ever need.

A wide collection of FX applications

Popular FX Applications

Easy motor and conveyer controlEasy flow rate and temperature controlCheap, complex control

Documents

PLC MELSEC-F FXSeriesFunction Ingles