Upload
aamir-imtiaz
View
12
Download
1
Tags:
Embed Size (px)
Citation preview
Plastic Furniture Industry
Due to the very low consumption as compared to developed countries and even in
India, a large gap is to be filled by introducing new and cost effective products.
Customers with low purchasing power don’t have any option other than plastic furniture.
Middle and lower classes in Pakistan is major buyer and these classes are 65% of total
population. Also there are very few players in this business.
The business of Molded Furniture has marked its place in the country through growth
during the last ten years. This growth has opened up new opportunities. The prime
reason for this is awareness about the product. Along with that, companies are offering
conditional warranty of plastic chairs minimizing risk of customer.
Molded Furniture is basically produces in developed countries to be used as Lawn
Furniture and outdoor restaurants. As trends are from developed countries, it was
introduced in Pakistan around 1984-1985 by a Karachi based firm. Then a factory was
installed in Gujranwala and then with the passage of time now there are some main 7
units producing plastic chairs, tables, baby products, etc day and nights.
Due to low purchasing power people in Pakistan found this product cheap, associated
with warranty covering the risk of consumers. Customer bank is increasing day by day
with the penetration of companies, by introducing new and economical models, variety
of colors, exports to Afghanistan, etc.
International Trade:
In 2007 the trade value of plastic furniture in 2007 is $149,613 exports and $219,410
imports. In 2008 it was increased and trade value of plastic furniture was $555,519
exports and $253,114 imports. It is clear that in 2007 the imports are more than exports
but in 2008 exports are twice to imports. (Exhibit 1)
The Government of Pakistan has offering Rs.3.5 per kg rebate on exports. However
Government has offered D.T.R.E. (duties and taxes remission exemption) for the
Materials to be imported for export purpose only.
Plastic furniture includes, All Model Chairs, All Model Tables, Baby Swings, Shoe
Racks, Stool. (Exhibit 2)
The main raw material of molded furniture is plastic.
Pre feasibility report of moulde furniture (SMEDA)
Plastic:
A plastic is a type of synthetic or man-made polymer; similar in many ways to natural
resins found in trees and other plants. Webster's Dictionary defines polymers as: “any of
various complex organic compounds produced by polymerization, capable of being
molded, extruded, cast into various shapes and films, or drawn into filaments and then
used as textile fibers”.
Plastics are used because they are:
• Attractive
• Hard
• Soft & Rubbery
• Easy to Clean
• Flexible
• Good insulators of heat or electricity
• Light weight
• Hygienic
• Easy to Shape & Color
• Economical
Apart from some of the properties of plastics mentioned above, one important feature of
plastic is that it is a non-rusting material, which makes it a very usable commodity
especially in coastal areas where there is a lot of humidity.
As stated earlier, the use of plastics is increasing all the time as they replace materials
such as metal, wood, paper, ceramics and glass in a wide variety of uses. More over
the overall demand and local supply gap that prevails in the market remains largely
unmet which also provides opportunities for entering in to this business
Market Overview
The per capita consumption of plastic in Pakistan was 3.1 kilograms, while this was 3.3
kg in India and 7 kg in China. The highest per capita consumption of plastic was in
United States and Germany, where per capita consumption was 120 kg per annum.
Globally, the per capita plastic consumption worked out to be around 24 kg per annum.
The consumption of plastic was less in Pakistan as the local industries were not
developing as rapidly as they were growing in the other parts of the world.
Market Players
There were some 6,000 plastic products manufacturers in the country and 600,000
people were directly and indirectly engaged with this business. The plastic industry fall
in cottage industry and there were some manufacturers, who were medium-sized
industries. (Exhibit 3)
Consumption & Imports
Pakistan used to import 80-90 percent raw material for plastic making from different
countries. The total consumption of raw material used in the plastic industry in the
country was around 450,000 tonnes. The country imported 70 percent raw material from
UAE and Far Eastern countries. The special grade raw material was imported from
Germany and USA, which was 20 percent of total raw material consumption. India was
also a major producer of plastic’s raw material. The total consumption of plastic raw
material in India was two million tones annually.
The prices of raw material of plastic industry depend on international scenario. During
Iraq war, the prices shot up by 70 percent. The raw material of plastic industry is a
byproduct of crude oil. The prices are directly related to crude oil prices as the raw
material is made from Naphtha, which is a by-product of crude oil.
Moreover, the recent penetration of cheap Chinese products into Pakistan had made
the competitive situation in the local plastic industry very intense. Local manufacturers
had to import raw material which is a substantive cost of their total produce while
Chinese products offering a large variety at affordable rates had made survival difficult
for the local industry.
Diagnostic study of plastic (SMEDA Pakistan)
Introduction of Plastic Furniture
Plastic furniture is made with poly propylene (Plastic Dana) that is currently not
manufacturing in Pakistan. It is imported from Turkey, Korea, Saudi Arabia, Thailand,
Hong Kong, Australia, china. It also made with recyclable material because plastic is
100% recyclable material.
Plastic scrap recycling had developed into an industry in Pakistan. About 400 units were
engaged in recycling of plastic scrap in Punjab.
The sources for collection of scrap were house hold waste of broken unusable plastic
items, Industrial plastic waste, plastic cans, container, etc., hospital waste such as
disposables syringes, canolas, etc.
Plastic is shaped in furniture through molding machines. Molding machines melt and
inject plastic in moulds and required plastic furniture is made.
Manufacturing Process:
The following steps are included in the manufacturing process.
1) Initially mixing of color with plastic Resin.
2) Input the material into the injection molding the machine.
3) Receive chairs and parts of table as output.
4) Assembling and packing. (Exhibit no. 4)
Company’s History/Introduction
Boss:
The company was invented in 1991, and has been working to produce high
quality moulded furniture, plastic steel furniture, households. The brand name of Pakson
Industries in Pakistan is BOSS. Over the years BOSS has earned great respect in
markets all over the country.
The company strictly abides by the sovereignty, keeping the honesty as its priority. It
has the clear goal which states,” a complete well coordinated moulded furniture, plastic
steel furniture & households etc”. “The statement clearly shows that the company keeps
it employees motivated towards providing high quality products.”
Pakson International Plastic Industry (BOSS) services, policies of competitive prices,
strict quality control and regular delivery are the cause of its success.
(BOSS official website)
Sonica:
Sonica Plastic industries started its business in 1978 by manufacturing spare parts of
Plastic washing machices on a small scale under the supervision of Muhammad
Munawar. But continuously and gradually this small unit started manufacturing of Plastic
Furniture on a large scale in 2009.Sonica Plastic Industries has its own automatic
machinery. this is all achieved by sharing committed management and experienced
employees. Sonica Plastic Industries is now become a prominentname in Plastic
Furniture industry in Pakistan. Sonica Plastic Industries satisfying hundred of million
customer all over Pakistan and abroad too.
(Sonica official website)
Citizen:
Citizen established in 1987, produces high class furniture both in plastic and steel
materials.
Haji Bashir Ullah (Late) was the founder of the company. He started production on a
small scale. Today citizen is recognized as one of the biggest plastic and steel plastic
furniture manufacturers in Pakistan.
Through continuous improvement & innovation, has tremendously developed to become
well reputed for its advanced technology, fine product quality and excellent after sale
service, with more than 100 sale networks all over the Pakistan.
Precision machining and strict quality control at all stages of production to meet
exacting requirements of this modern world in the hallmark of citizen.
(Citizen official website)
TOYO:
After citizen the first mover, TOYO enter in to this industry. Two partners Mr. Azam and
Mr. Iftikhar introduce TOYO plastic industries than in 1991 one partner made separate
firm with the name of BOSS.
Environmental Analysis
In Pakistan CITIZEN firstly introduce plastic furniture, they start with steel plastic in
1987. Steel plastic mean plastic chair with steel foot. Than TOYO enter in to this
industry. Two partners Mr. Azam and Mr. Iftikhar introduce TOYO plastic industries than
in 1991 one partner made separate firm with the name of BOSS. BOSS firstly highlights
the plastic furniture industry in Pakistan. Now TOYO is in stage of recession in plastic
furniture. A good development made in this industry in near past because of need and
demand of people for plastic furniture and recent trend of plastic furniture in Pakistan.
Dilawar Hasan Shah(General manager sonica)
PEST Analysis
POLITICAL, GOVERNMENTAL, & LEGAL FACTORS
1. Exporters and importers of Pakistan are facing problems to get visa from the foreign
embassies due to security issues.
2. Establishment of EIS (Export Investment Support) for the purpose of research and
development centers.
3. Government is charging heavy duty on raw materials.
4. Government is not providing any subsidy to the plastic furniture industry.
5. High prices of petroleum are also affecting the prices of finished goods.
6. There is no or very short relief on the import of polypropylene.
7. Companies are paying heavy import duty on raw materials due to which per unit cost
is increasing.
8. The duties on the import of polypropylene need to be further reduced.
SOCIAL, CULTURAL, & OTHER FACTORS
1. Buyers are quality conscious, so to meet standards of the buyers, manufacturers
must maintain high quality in moderate rates which is a big task.
2. Firms in Gujranwala are running by family ownership because of lack of trust on the
others.
3. All plastic furniture companies are importing their raw material from different
countries due to which they are increasing prices of their products.
4. Plastic furniture manufacturing sector in Pakistan rising due to shifting of the people
towards plastic furniture.
TECHNOLOGICAL FACTORS
1. Lack of skilled labor is another problem faced by the firms existing in plastic furniture
industry in Gujranwala.
2. Labor in plastic furniture industry is not mostly familiar with the usage of machinery.
3. The machinery is mostly imported which can be technologically inferior as compare to
international market.
4. Government is not focusing on research and development
departments.
ECONOMIC FACTORS
1. Introduction of VAT (Value Added Tax) and new governmental policies are also
affecting.
2. The rising in the utilities cost such as electricity, telephone, gas etc. increased the
cost of production.
3. The rise in the services charges and interest rates on loans of the Banks is also a
drawback to the growth of plastic furniture industry.
4. High rates on the export re-finance also drawback for the plastic furniture industry.
5. Fluctuation in foreign exchange rates also affects the prices of raw material.
Mr. Abdul Rehman(General manager BOSS)
SWOT Analysis of BOSS
Strength:
Good Brand Image.
Pioneer in Plastic chairs.
Cover almost 60% of the total sale of plastic chairs in Pakistan.
Manufacture huge range of plastic products as never other company
manufacture.
Quality Products based on the best available raw materials.
A wide range of plastic chairs (main product) and other products.
Strong financial position due to strong background of the CEO.
Qualified and skilled labor in the region.
Adoption of new technology
Weaknesses:
Weak corporate culture (lack of communication among the departments).
Employees are under stress by the management.
Non participative management.
Lack of fully functional and authorized HR department
Opportunities:
Large domestic markets (lack of customers for Chinese products).
Company has good market image so they can add new product lines
Increasing trend of plastic furniture
Threats:
Low price competitors are the main threats for the company. (Toyo, Citizen and
other local firms)
Threats from Chinese market due to low price products of same range.
SWOT Analysis of Sonica
Strengths:
Good Relationship with customers
New technology introduce
A wide range of plastic furniture
Skilled labor
Provide cheaper products to its customers
Increasing Preference of Plastic furniture
Good communication among the departments
Personal relationing with distributors
Weaknesses:
Lack of Research & Development efforts.
Lack of vision / Planning
Not getting benefits from support institutions
Opportunities:
Increasing Preference of Plastic furniture 65% middle income group of whole
population
Competitive rates
Threats:
increasing prices of raw material
Porter’s five forces model
Competitor Analysis
In Pakistan main players of this industry are;
1st Boss
2nd Sonica
3rd Citizen
The other firms are TOYO, VENUS, UNIQUE, TIGER, PHATA, PARADISE etc also
working in the industry in Pakistan. In the view of international basis, India is a big name
in plastic furniture industry and then China and other countries.
The main competitors are BOSS, SONICA and CITIZEN. The BOSS and SONICA are
the main two big size companies; they have new and famous mold machines and totally
new plants but the other local firms use old and second hand plants. The BOSS’s
market share is about 30% in the industry in this way BOSS is the market leader of the
industry. Than SONICA has 10-15 share and other share is acquired by the other firms.
SONICA consider BOSS as his competitor and they are growing in the industry. There
is a high competition in the industry and competition affect the prices and consumer
mind because consumers always in search of good quality, reliability, availability and
affordable prices. The BOSS plays in the industry for about 17-18 years and they are
highly penetrated in the market.
Now BOSS is the market leader of plastic furniture industry in Pakistan, they are in the
industry for about 17-18 years and are highly penetrated in the market. They use high
advertisement in print media, TV ads, sign boards, the main advantage is that they are
old player and they create a good will in the market and consumer minds. The main
strategy used by BOSS is high advertisement and BOSS in the first company who
highlights the plastic furniture industry in true sense. Boss increasing there size day by
day from 2009 to 2010 they expand their outlets from 15 to 24. (Exhibit 5).
Mr. Dilawar hasan Shah(General manager sonica)
Reason of Success of Sonica:
Sonica group of industries started plasted furniture buseness in 2009 and in a very short
time they made 10 to 15 percent share in the market. The main reason of there success
is that, they hire old boss’s employees who have a great relationing in market and
distributor dealers. 1st time they sell there products to the dealers on the basis of boss’s
employees to the dealers. The old employees of boss have great experience of market
in this way they speedy penetrate in market. The general manager of sonica group of
industries, Mr. dilawar Hasan Shah was also the general manager of boss and give their
services in boss for 10 year, he has a great experience of plastic furniture. Sonica hire
all experienced and well reputed employees from boss and it is the success of sonica.
Mr. Umair Javed (Area sales manager, sonica)
Advantages and Limitations of Industry
The material used in plastic furniture is totally recyclable and easily available, this is the
main advantage for this industry and many local suppliers are available, skilled labor is
also easily available. When we talk about consumer benefit to this industry, there is less
space houses, low purchasing power and inflation people want economical products
and plastic furniture is economical and its use is everywhere such as in houses,
classes, colleges, public places, gardens etc, so the demand for plastic furniture is
increasing. The limitation of the industry is electricity shortage and no government
support. There are mold machines which run best on electricity, electricity provide
specific temperature to the electric heater in molding machines, in the shortage of
electricity, the molding machines run on gas and gas does not provide accurate
temperature in result low efficiency production. Another limitation is that there is no
manufacturing of POLY PROPLEEEN (which is the main raw material) in Pakistan and
it import from other countries such as Turkey, Korea, Saudi Arabia, and government
does not provide any subsidy in import of raw material.
The main buyers of plastic furniture are middle income and above middle income
people who want economical prices and also there is a great demand of plastic
furniture. The cities in which high sale of plastic furniture are Rawalpindi, Karachi,
Multan, Murry and south Punjab region. There are many small local suppliers available
to this industry and they provide material at reasonable prices, there is no problem of
suppliers, raw material also import from other countries. Also suppliers available those
are provide recyclable plastic material that is used in production.
Problems of Industry:
The main problems are electricity crises, high import taxes and no support of
government. The alternatives available are generators and power plants but they
consumed so much fuel in result the manufacturing cost is high and alternative of
imports are use of local raw material and use of recyclable material. The days of huge
electricity load shedding the industry become totally close and no working will b made.
High prices of petroleum also increase plastic prices because plastic is a petroleum
product.
Interview with Sonica general manager
Consumer Analysis
Consumer analysis describe about the consumer point of view about the industry and
about market players. Consumers buy plastic furniture because of economical prices,
require less space it mean plastic chairs are pack with each other and it also easy to
move because of light weight and better quality. The research describe that 60%
consumers prefer plastic furniture because it is easy to move and light weight.
(Exhibit 6)
When we ask to the consumers that which company’s plastic furniture you want to buy
than more than 40% consumer prefer to BOSS it describe the positioning of firms.
(Exhibit 7)
Plastic furniture capture the market of other furnitures such as wood and iron furniture.
(Exhibit 8, 9)
Consumers feel that it is a profitable industry when we ask them would you invest in
plastic furniture business, more than 50% people agree. (Exhibit 10)
Brand loyality is very important for a firm loyal consumers are na switch to other brand
when prices are increase. (Exhibit 11)
Exhibit no. 1Exports of Pakistan
2007
Countries Trade value $ Quantity (kgs)
World 149,613 35,406 Afghanistan 143,316 33,916
United Arab Emirates 5,992 1,418
Seychellies 168 40 Canada 136 32
Exports of Pakistan2008
Countries Trade value $ Quantity (kgs)
World 555,519 127,838 Afghanistan 372,493 85,719 UAE 109,350 25,164
020,00040,00060,00080,000
100,000120,000140,000160,000
World AfghanistanUnited Arab EmiratesSeychelliesCanada
Mauritius 65,885 14,931 UK 3,682 847 Switzerland 1,385 319
Exhibit no. 2
Exhibit no. 3
0
100,000
200,000
300,000
400,000
500,000
600,000
World
Afghanistan
UAE
Mauritius
UK
Switzerland
0
100,000
200,000
300,000
400,000
500,000
600,000
World
Afghanistan
UAE
Mauritius
UK
Switzerland
0
100,000
200,000
300,000
400,000
500,000
600,000
World Afghanistan UAEMauritius UKSwitzerland
Exhibit no. 4
Exhibit no 5
Date salesNo. Of outlets sale staff incentive advertising
December 2008 5647000 15 15000 705000January 2009 5805000 15 15000 650000February 2009 5420000 1 4 10000 625000
Mar-09 5525000 14 10000 325000 Apr-09 4800000 14 8000 300000
May-09 4850000 15 8000 320000 Jun-09 4600000 15 8000 400000 Jul-09 4650000 15 8000 400000
Aug-09 4450000 15 8000 425000Sep-09 4800000 16 10000 650000Oct-09 5200000 19 15000 700000Nov-09 5500000 19 15000 900000Dec-09 5920000 19 18000 800000
January 2010 6200000 18 18000 750000Feb-10 6000000 19 18000 700000Mar-10 5800000 20 16000 550000Apr-10 5500000 20 16000 400000
May-10 5200000 19 10000 300000Jun-10 4900000 19 8000 325000Jul-10 5100000 19 10000 280000
Aug-10 4950000 20 10000 325000Sep-10 5500000 20 18000 680000Oct-10 6000000 22 20000 750000Nov-10 6600000 23 20000 800000Dec-10 7000000 24 25000 1000000
Exhibit no. 6
Exhibit no. 7
Exhibit no. 8
Exhibit no. 9
Exhibit no. 10
Exhibit no. 11
count Increase price, switch to other
brand
Yes No May be Total
Company's Furniture Boss 22% 16% 10% 48%
Prefer to buy Sonica 0% 2% 4% 6%
Venus 0% 4% 2% 6%
citizen 10% 4% 10% 24%
Toyo 6% 4% 6% 16%