PLANT CLOSED Plant ClosInGs3.serverdata.com/ · Inspection: Day prior to auction from 9AM-4PM 2011 Rebuilt ... RansoME Weldi ng M anipulator, Model 1212, S/N 3226765, 12' Vertical

H H H H H H H H HH H H H H H H H H HH H H H H H H H HH H H H H H H HH H H H H H H HH H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H H PLANT CLOSED

PUBLIC PUBLIC

Plant ClosInG

VANGUARD XHGK-600 600-TON TURNING ROLLS 50,000 LB. READCO WELDING POSITIONER

BERTSCH 3-1/2” X 10’ HEAVY DUTY INITIAL PINCHMECHANICAL POWER PLATE BENDING ROLL

BID IN-PERSON

OR ONLINE.

SEE PAGE 7 FOR DETAILS

90 MM PINES FIVE-AXIS MULTI-STACKEXTENDED BASE CNC HORIZONTAL TUBE BENDER

PACIFIC K400-14 400-TON HYDRAULIC PRESS BRAKE

3-1/2” X 10’

Updated2011

PLANT CLOSING

THERMAL ENGINEERINGINTERNATIONAL

2110 Industrial Road in Sapulpa, Oklahoma 74066(Approx. 15 Miles Southeast of Tulsa)

THURSDAY, FEB. 13THSTARTS AT 10AM

Inspection: Day prior to auction from 9AM-4PM

2011

Rebuilt2007

Industries (1991) Inc.

AUCTIONEERS | LIQUIDATORS | APPRAISERS

www.maynards.com

2

THERMAL ENGINEERING INTERNATIONAL / 2110 INDUSTRIAL ROAD IN SAPULPA, OK 74066

CNC TUBE BENDERS90 MM PInEs Five-axis Multi-stackExtended Base CnC Horizontal tubeBender, Model MNC-090, Pines S/N14200-86023, HMT S/N 383B, CompleteRebuild by HMT Horn Machine Tools atCost of Approx. $170,000.00 in 2007Including New Bend Pro G2 Control &Complete Mechanical & HydraulicOverhaul, 38' Bed Length, 50-HPHydraulics w/Booster Pump, ThermalTransfer Heat Exchanger, Model AOVH-25, S/N 655464, Power Feed & Stop, 40'Loading & Feed Conveyor, CatalogSpecs: 3.5” x .109 Steel Tubing, 4” x.065” Stainless Steel, 3” x .188” Non-Ferrous Tubing, 14” Standard BendRadius to Center Line, 136” StandardMax Tube Length Over Mandrel, 72”Standard Carriage Travel, 195 DegreesBend Arm Rotation, 360 Degrees MaxBend Angle (+ Allowance for SpringBack), 360° Collet Rotation, 4.7 RPMBending Arm Speed, Email [email protected] for info on rebuild (Rebuilt 2007)6” PInEs #4 Heavy Duty Base CnCHorizontal tube Bender w/Booster &Extended Base, S/N 11490-07033,Complete Rebuild by Pines at Cost ofApprox. $185,000.00 in 2007, Pines Dial-A-Bend 6SE Touch Screen CNC Control,Approx. 10’ Base Extension, HydraulicBooster, 200° Max. Bend, 20' Tablew/Hydraulic Stop, 40-HP Hydraulics,Catalog Specifications: 6” x .250” RoundTubing Non Ferrous, 6” x .165” RoundTubing, 4-1/2” x .250” Round TubingStainless, 4.50” x .337” Steel Pipe, 4” x.250” Square Tubing, 3” x 6” x .250”Rectangular Steel Tubing, 3” x 5” x .250”Rectangular Steel Tubing, 3-1/2” RoundBar, 3-1/8” Square Bar, 4.266” SectionModulus (Z), 6” Max. Horizontal & Vertical(Rebuilt 2007)

90 MM PINES FIVE-AXIS MULTI-STACKEXTENDED BASE CNC HORIZONTAL TUBE BENDER

6” PINES #4 HEAVY DUTY BASE CNC HORIZONTAL TUBE BENDER

Rebuilt2007

Rebuilt2007

3

THURSDAY, FEBRUARY 13TH AT 10AM / INSPECTION: DAY PRIOR TO AUCTION FROM 9AM - 4PM

PRESS BRAKEPaCIFIC 400-ton Hydraulic Press Brake, Model K400-14,S/N 6872, 1/2" x 11' Capacity, 14' Overall, 146" BetweenHousings, 10" Throat, Hurco Autobed 5C, 36" Back Gauge

SHEARCInCInnatI Hydraulic squaring shear, Model Century4H12, S/N 3C031, 12' x 1/2" Mild, Roller Ball Top, (2) 32"Front Gauge Supports, 60" Squaring Arm, 32" Front GaugeSupports, 60" Squaring Arm, 32" Power Back Gauge, 25HP

PIPE EQUIPMENTHYDRaUlIC HoRIZontal BUllDoZER tYPE PipeBender, 3" Dies, 20-HP Hydraulics & ReservoirPanGBoRn tube Blast system, 50' Load & UnloadConveyors, Blast Cleaner P/N ES1902, S/N 880497, PassThru Type, 4" Max Dia. Pipe Dust Collector & ReclaimSystem (System Rebuild Parts are in Plant Inventory)PInEs tube End Former, S/N 99801-68198, 1-3/4" SizingDies, 30-HP HydraulicsDRaFto Induction type tube swedger, w/30-HPHydraulic System, Tocco Induction Power Supply, Tube EndHeater, Thermal Transfer Heat ExchangerCustom tube straightener, 9" Dia. Tube, 3-HP Hydraulics

PACIFIC K400-14 400-TON HYDRAULIC PRESS BRAKE

CINCINNATI CENTURY 4H12 HYDRAULIC SQUARING SHEARPINES TUBE END FORMER

HYDRAULIC HORIZONTAL BULLDOZER TYPE PIPE BENDER PANGBORN TUBE BLAST SYSTEM

4


BERTSCH 3-1/2” X 10’ HEAVY DUTY INITIAL PINCH MECHANICAL POWER PLATE BENDING ROLL

BERTSCH 2-1/2” X 10’ Heavy Duty Initial Pinch Mechanical Power Plate Bending Roll

ROUNDO 10' X 1/2" PLATE BENDING ROLLS

PLATE BENDING ROLLSBERtsCH 3-1/2” x 10’ Heavy Duty Initial PinchMechanical Power Plate Bending Roll, Model 34, S/N9926, Manufactured 1971, Capacities 3-1/2" Cold & 7" Hot,Approx. $150,000.00 Work Done Over Last 2 YearsIncluding Replacing Main Worm Gear, Wedge Motor, LimitTorque Update and Lube System Upgrade, 10’-2” TreadLength, 10’-4” Between Side Frames, Arranged to ReceiveInterchangeable Top Rolls from 22” Mi. to 35” Max.Diameter, Arranged w/ about 11” Vertical Adjustment ofLower Front Pinch Roll, Furnished w/ Standard 1045, 35”Diameter Top Roll, Idler Top Roll, (2) Lower Rolls Geared,Hydraulic Powr-Pak for Drop Hinge Operation; S/N 339726,20” Diameter Dial Type Indicator for Rear Roll, CentralizedFarval Grease Lubricating System, Automatic Power Type,Guards Enclosing Gears, Steel Housing Hinge, Main DriveGears, Arranged for Power Adjustment to Lower FrontPinch Roll, 200-HP Main / 100-HP Adjusting Wedge Motor(New 1971, Updated 2011)Bertsch 2-1/2” x 10’ Heavy Duty Initial PinchMechanical Power Plate Bending Roll, Model 30, S/NM10372, 120” Maximum Bending Length, 26” Top RollDiameter, 28” Bottom Roll Diameter, Hydraulic Drop End,125 HP, 60 HP Roll Adjustment Motor, P&H Controls,2.719” @ 120” 36.3 Min Diameter, 2.094” x 120” 27.5” MinDiameter, 10” Diameter Top Roll For 1”, No. 30 SpecialCombination Drive, Heavy Duty, 10’2” Treads, 10’4”Between Frames, Interchangeable Top Rolls from 12” Dia.Min. thru 26” Dia. Max., 8” Max. Daylight Opening Between,7-1/2 HP Hydraulic System, Digital Type Durant PositionIndicator for Rear Roll (New 1978) – Located in Milwaukee,will be sold via photo, Email [email protected] forFactory Build Sheet 1992 RoUnDo 10' x 1/2" Plate Bending Rolls, ModelPS225, S/N 925153, 122" x 9 1/2" Rolls, Drop EndPEXtRo 36" Power Bending Rolls, Model 3416-I, S/N320-889, 3" Dia. Rolls, 16-Gauge

POWER TURNING ROLLS2011 VanGUaRD 600-ton turning Rolls, Model XHGK600, S/N 3908171, Power/Idler Rolls, 35" x 14" Rollers,175" Between Centers, (2) 7.5 KW Drive Motors, 4"-40"IN/MIN Speed400-ton Power turning Rolls, 39" x 7" Steel Rollers, 15'Between Centers w/Idler300-ton MItRosKI Power turning Rolls, 39" x 7" SteelRollers, 178" Between Centers, (2) Idlers300-ton tElEDYnE REaDCo Idler, 39" x 7" SteelRollers, 160" Between Centers(2) PREston EastIn 200,000-lb. Power turning Rolls19" x 9" steel Rollers, 80" Between Centers, Model 11SA-200HD-3 & 11SA-200HD-4PREston EastIn 90,000-lb. Power turning Rollsw/Idler, Model TDRA 90HD, S/N TDRA 90HD-7, 19" x 18"Rubber Rollers, 80" Between CentersaRonson 90,000-lb. Power turning Rolls, 19" x 5" SteelRollers, 70" Between Centers34,000 lb. Capacity Power turning Rolls 19" x 12"Rubber Rollers w/IdlerPREston EastIn Power turning Rolls, 28" x 5" Steel

PLATE BENDING ROLLS

Updated20113-1/2” X 10’

2-1/2” X 10’

5


VANGUARD XHGK-600 600-TON TURNING ROLLS

400-TON POWER TURNING ROLLS

300-TON MITROSKI POWER TURNING ROLLS

300-TON TELEDYNE READCO IDLER

75' GAS FIRED CAR BOTTOM TEMPERING OVEN

SOUND INSULATED BLAST TEST BUILDING

PRESTIN EASTIN 90,000-LB. POWER TURNING ROLLS

Rollers, 92" Between CentersWEBB Power turning Rolls, 13' x 13" Steel Rollers w/Idler, 60"Between CentersPower turning Rolls, 78" x 13" Steel Rollers w/Idler, 54" BetweenCentersRubber turning Rolls, 20" x 6-1/2" Rollers w/Idler, 88" Between CentersPREston EastIn Idler, 28" x 5" Steel Rollers, 90" Between CentersPower turning Rolls, 12" x 11" Rubber Rollers, 48" Between Centersw/Idler

TEST BUILDINGsound Insulated Blast test Building,Concrete Pad Mounted w/33" Concrete Walls, 15' Width, 14' DomedHeight, Double Door, 60' Length, 3/4" Plate Steel, (8) Walls, Vented

OVENS75' Gas Fired Car Bottom temperingoven, Approx. 12' Inside Width, 5-Zone / 20-Burner, 1,200-1,800°FHoneywell Chart Recorder & Controls25' Gas Fired Car Bottom tempering oven, Approx. 12' Inside Width,5-Zone / 20-Burner, 1,200-1,800°F Honeywell Chart Recorder & Controls

POWER TURNING ROLLS

2011

6


VANGUARD WELDING MANIPULATOR

MG PLASMA BURNING TABLE RANSOME 1212 WELDING MANIPULATOR

(2) 200-AMP THERMAL DYNAMICPAK 200 PLASMA CUTTERS

THERMAL DYNAMICSCUTMASTER 152 PLASMA CUTTER

CYPRESS 72" CIRCLE BURNER

(30+) MILLER, LINCOLN, TRW & PRO-WELD MIG, TIG & STUD WELDERS & POWER SUPPLIES

PANDJIRIS WELDING MANIPULATOR

2008

2011

ARONSON WELDING POSITIONER

50,000 LB. READCO WELDING POSITIONER KOIKE ARONSON WELDING POSITIONER PRESTIN EASTIN 12,000-LB.WELDING POSITIONER

ESAB & BUGO GOFER TRACK BURNERS

PRESTIN EASTIN WELDING POSITIONER

7


PLATE BEVELLERSGUllCo Plate Beveller, Model KBM28, 5/16" - 2" Capacity, 22-1/2° - 55°BevelsPUllMaX Beveler, Model X91, 1"Max, 25°-55° Bevel

WELDING MANIPULATORS

2008 VanGUaRD WeldingManipulator, Model lHW 6X6, s/n5608059, Max Vertical / Horizontal236.2" in Work Capacity, 39.4" - 236.2"in Elevation Speed, 3.28 FT/MINTraverse Speed, .115-2.625 FT/MIN,180° Rotation, 23' Track, Flux Hopper,(2) Lincoln Idealarc DC600 PowerSupplies, Lincoln NA-3S & NA-3NWeld ControllersPanDJIRIs Welding Manipulator,Model 1400 MANIP, S/N 400-8630,Lincoln Idealarc AC1200 & DC1000Power Supplies, Lincoln NA-3S & NA-4 Weld Controllers, 13' Vertical & 18'Horizontal Reach, Mobile BaseRansoME Welding Manipulator,Model 1212, S/N 3226765, 12' Vertical/ Horizontal, Lincoln Idealarc DC1000Power Supply Flux HopperlEWIs Welding Manipulator, 10'Vertical & Horizontal Reach, LincolnIdealarc DC600 Power Supply, LincolnNA-3S, Weld Controller, Mobile Base25' Manipulator travel RailWelding screens & leads

WELDING POSITIONERS

50,000 lb. REaDCo WeldingPositioner, Model UPG-500, (1966)S/N S5033, 82" x 82" Table, w/PandjirisModel "A" Chuck, 8,000-lb./InRotational Torque, 22,500-lb./In Tilt,

Capacities: 2,000-lb. @ 6", 340-lb. @60"PREstIn EastIn 12,000-lb. WeldingPositioner, Model FT120, S/N FT120-17

TRACK BURNERSEsaB track Burner Model CM-79,S/N AARJ16003BUGo GoFER track Burner, ModelGOF3240, S/N A911-01195aRCaIR Portable track BurnerController

PLASMATABLE / CUTTERS

MG PlasMa Burning table, ModelMG4514, S/N 3694, (1) Plasma, (1)Oxy-Ace, (1) Hypertherm arc WriterHead, Model 084011, S/N 084-000278, Hypertherm Ht4400 Plasma Powersupply, S/N 4400-000287, 400 AMP,46' x 14' Tank, Burny 10 LCD PlusControl, Rebuilt 2000 by Alltra(2) 200-aMP thermal Dynamic PaK200 Plasma Cutters, (New 2011)tHERMal Dynamics Cutmaster 152Plasma CutterHypertherm MaX100 Plasma CutterHypertherm Powermax 900 PlasmaCutter w/Bugo Gofer III track Burner

CIRCLE BURNERSCYPREss 72" Circle Burner, ModelGB-5, S/N H921022CYPREss 36" Circle Burner, ModelCB-2, S/N B919752011 CYPREss 48" Circle Burner,Model CBO-200, S/N 592110940011ACYPREss Welding Circle Burner,Model 6E-4P, S/N 4011338 (Parts /Repair)

WELDERS & RELATED

(4) MIllER XMt 350 CC/CV MIGWelders, 350-AMP @ 100%, (3) w/Miller 70 series Wire Feeder,Miller Coolers, CartsMIllER XMt 304 MIG Welderw/Process Controller, Miller Cooler,Cart(3) MIllER Deltaweld 651 MIGWelders, 650-AMP, (1) Parts/Repair)(6) MIllER Deltaweld 650 MIGWelders, 650-AMP(4) MIllER Deltaweld 451 MigWelder, 450-AMP, w/Miller D-52D & D-54D WirefeedersMIllER 250 Welder, 250-AMP @100%(2) MEssER / lInColn Euro Matig35-2 tIG Welder(4) MIllER syncrowave 350 tIGWelder, 350-AMP @ 40%, w/Cooler,(1) Parts/Repair(2) MIllER syncrowave 250DX tIGWelder, 250-AMP @ 40% w/CoolerlInColn Idealarc tIG 300/300Welder, 300-AMP @ 60%, w/DynaFlux CoolerlInColn Idealarc tIG 250/250Welder, 250-AMP @ 40% w/BernardCoolertRW stud Welder, 5000 Series, Type101, Model 750-562-000, S/N 07791B,1,200-AMP @ 20%, Max 1,600-AMP,3/16" - 3/4" StudsPRo-WElD arc 1200 stud Welder,1/4" - 5/8" Capacity(2) MIllER CP/CC 1500P Powersupplies, 1,500-AMP, w/Nelson 3/8" -7/8" Stud Welder, Model NS-20A-4DlInColn Idealarc DC1000 Powersupply 1,000-aMP(6) MIllER Deltaweld 651 & 650Power supplies, 650-AMP

ltEC VI450a Power supply, 450-aMPlInColn Idealarc R3s-400 Powersupply, 400-AMPtoCCo Inductron Power supply,Model OL-294, S/N 93-4295-12 (Parts /Repair)(12) MIllER Wire Feeders (70 Series,S60, D-52D, S-22A)(11) BERnaRD Coolers(3) MIllER Coolers(13) lInColn Xtractor 1GC FumeCollectorslInColn Fume CollectorMIllER load Bank Welding MachineCalibratorPHoEnIX 100°-450°F Dry Rod oven,Type 950FX, Model 5KEEn Rod oven

UNABLE TO ATTEND?

BID ONLINE IN REAL TIME ATWWW.BIDSPOTTER.COM

8


CLARK C500Y200 20,000-LB. FORKLIFT (PARTS / REPAIR)

(2) HYSTER S120FTS 12,000-LB. FORKLIFTS

CLARK C500Y-155D 11,200-LB. FORKLIFT (PARTS / REPAIR)

SULLAIR PORTABLE VACUUM PUMP SULLAIR VACUUM PUMP

PARTEK HYDROSTATIC TEST PUMP PORTABLE HYDROSTATIC TESTER

(2) HYSTER S120FT 12,000-LB. FORKLIFTS

20082008

9


TRACK MOBILE TM4000 RAILCAR TRANSFER (5) SPREADER BEAMS

(3) 53' 6" L 220,000-LB. FLATBED RAILCARS

FORKLIFTSClaRK 20,000-lb. Forklift, ModelC500Y200, S/N Y1625-4-3290, 120"Lift, Dual Solid Front (Parts / Repair)allIs CHalMERs 17,000-lb.Forklift, S/N AJK132508, 213" Lift,Solid Tire (Parts / Repair)2008 HYstER 12,000-lb. Forklifts,Model S120FT, S/N G004V03486F,LPG, GM Engine, Solid Tires, 209" LiftHeight, Three-Stage Mast, Side Shift,Fork Positioner, Self-Leveling Forks,64" Forks, Cab w/Fan & Heat 2008 HYstER 12,000-lb. Forklift,Model S120FT, Solid Tires, GMEngine, Lever Shift, 3-Stage Mast,208" Lift Height, Side Shift, Cabw/Heat 2008 HYstER 12,000-lb. Forklift,Model S120FTS, S/N G004V03236F,Compact Body Style, Solid Tires, GMEngine, Lever Shift, Standard Mast,111" Lift Height 2008 HYstER 12,000-lb. Forklift,Model S120FTS, S/N G004V03440F,Compact Body Style, Solid Tires, GMEngine, Lever Shift, Standard Mast,111" Lift Height ClaRK 11,200-lb. Forklift, ModelC500Y-155D, S/N Y1015-0126-7014FC, 137" Lift, Solid Tire (Parts /Repair)2001 YalE 9,000-lb. Forklift, ModelGDP090, S/N C813V01693Y,Pneumatic Tires, Diesel Engine, LeverShift, Standard Mast, 112" Lift Height,Side Shift, 54" Forks ClaRK 6,000-lb. Forklift, ModelCGC32, S/N C365L-0078-9497FB,

Solid Tires, LPG, Lever Shift,Standard Mast, 127" Lift Height, SideShift 2004 YalE 5,000-lb. Forklift, ModelGLC050RGN, S/N E187V22351B,Solid Tires, LPG, Lever Shift, 3-StageMast, 195" Lift Height, Side Shift (2) Forklift-Mount 5th Wheel Plates(2) GEnIE Electric Platform scissorlifts (Parts / Repair)sKYJaCK Platform scissor lift(Parts / Repair)

MATERIAL HANDLING

(2) Flatbed Railcars, 53' 6" LengthSteel Deck, 220,000-lb. Capacity,249,000-lb. Load Limit, 49,260-lb.Frame Weight, ID# SS1002 & SS1004(1) Flatbed Railcar, 53' 6" LengthSteel Deck, 220,000-lb. Capacity,249,000-lb. Load Limit, 49,260-lb.Frame Weight (Parts/Repair)track Mobile Railcar transfer, ModelTM4000 Super, Road/Track Wheels,DSL, Front/Rear Coupler, 1823.6 HR(5) spreader Beams: (2) 120,000-lb.x 26' Lift, (1) 20,000-lb. x 24' Lift, (1)20,000-lb. x 25' Lift, (1) 20,000-lb. x30' Tube Lift, S/N 22365-320,000-lb. x 35' tube lift spreaderBeam, S/N 22565-92-ton Crane Forks, Model HDP-4-42,42" Forks1-1/2-ton Crane Forks, 29" Forks25'l x 8'W Rail Mount transfer Car(8) t/a Flatbed Yard trailers, (3) 40',(1) 45', (1) 47', (1) 40' w/ 8' Tail (1) 40'w/ 12' Tail, (1) 40' w/ 15' Tail

(8) Rail Mount transfer Dollies(2) adjustable Work Gantries, 12'Wide Platform, 15' Platform Heighttrailer tug Pro w/10.5 HP Briggs &stratton Gas Engine(4) 2-1/2" Wire Rope slings, 50-TonCapacity, 6XWS36+1WRCConstruction, D 65 x 7 M Length, CertTags(3) CooPERHEat stress Relieversw/Chart Recorders, ModelMDH32018-2000PR, S/N 032; ModelPMD-99-02-016; Model PMD-99-02-023

TEST / INSPECTIONEQUIPMENT

sUllaIR Portable Vacuum Pump,Model RSV10-15A AC, S/N 003-

V82813, 25-29.5 IN/HG Max VacuumsUllaIR Vacuum Pump, Model VS-20,S/N 003-V87222, 75-HP, Rated Vacuum15-29.5 IN/HG, 1,780 HoursPaRtEK Hydrostatic test Pump,15,000 PSI, Model L-74, S/N 2656, 6.5GPMRontonICs Hydrostatic tester,Portable 7.5-HP Pump, 250-Gallon PolyWater TankPortable Hydrostatic tester, 7.5-HP,950-Gallon Poly Water Tank(3) Hydrostatic testers, Model PDQC,S/N's 1079, 1577, 1881lasERMaRK lMH-C laserDaVID WHItE auto laser 900

20,000-LB. X 35' TUBE LIFT SPREADER BEAM

2 OF 5

2 OF 3

10


(6) CRATES AP1000 #4 FINNED STAINLESS TUBES

CLEMCO 2024 ABRASIVE BLAST CLEANER 900-GALLON ARGON REFRIGERATED AIR TANK SUNBEAM GAS FIRED END HEATER

THERMCO 6105 GAS MIXER WEBEN JARCO AUTOMATICCIRCULATING WATER HEATER

(2) LANDA PRESSURE WASHERS (2) LANDA PRESSURE WASHERS

MINUTEMAN POWERBOSS FLOOR SWEEPER/SCRUBBER ADAPTIVE VAR COMPENSATOR TRANSFORMER

NILFISK ADVANCE SWEEPER / SCRUBBER

2005

1 OF 21 OF 2

11


CHEVROLET DUALLY FLATBED TRUCK INTERNATIONAL TRUCK TRACTOR (PARTS / REPAIR)

CARLTON 4' ARM X 11" COLUMN RADIAL ARM DRILL LEBLOND DUAL DRIVE ENGINE LATHE

RAW MATERIAL(6) Crates aP1000 #4 Finnedstainless tubes, 120/Crate, Approx.7,200-lb./Crate, 120' Lengthassorted Plate & structural steel,Drops & Pieces (Parts / Repair)scrap steel (Parts / Repair)

ASSORTED EQUIPMENT

CaRlton 4' arm x 11" ColumnRadial arm Drill, MT 4-Spindle, 190-1500 Spindle RPM, Power Clamp &Elevation, 32" x 26" x 23" BoxCaRlton 7' arm x 19" Col. Radialarm Drill, MT 6-Spindle, 49-1500RPM (Parts / Repair)CaRlton 6' arm, 19" Col. Radial ArmDrill, MT 6 Spindle, 15-1500 RPM(Parts / Repair)lEBlonD Dual Drive Engine lathe,12" 3-Jaw Chuck, 16" Swing Over Bed,48" Between Centers, 1-1/2" ThruSpindle, 31-2,400 RPM Spindle,Threading, No CarriageloDGE & sHIPlEY Engine lathe,Model 2516, S/N 47993, 26-1/2" SwingOver Bed, 20" Swing Over Carriage,192" Between Centers Threading(Parts / Repair)loDGE & sHIPlEY 20" Power turnlathe (Parts / Repair)sunbeam Gas Fired End Heater, S/NF-193-69-M, 2,100°, Natural Gas(2) olIVER oF aDRIan Drill PointGrinders, Model 600A, S/N 8867 &Model PT, S/N 2054nU-MaRK 20-1/2" Floor type DrillPress, S/N 05075, 18-1/2" x 16" Table,150-4,200 RPMDaYton 12" Disc sanderKalaMaZoo Horizontal Band saw(Parts / Repair)Custom Facing & Milling Machine(Parts / Repair)

TRUCKSCHEVRolEt Dually Flatbed truck,Auto, Air, AM/FM, Gas, 12' Bed,186,868 Miles, VIN1GBJC34KPE119939IntERnatIonal truck tractor(Parts / Repair)

MISCELLANEOUSClEMCo abrasive Blast Cleaner,Model 2024, 6.0 Cu/Ft CapacitynIlFIsK advance sweeper /scrubber, Model Captor4800, RidingType LP, S/N 1000042976(13) VERsaGUaRD & GloBalFlexible Barrier system900-Gallon argon Refrigerated airtank660-Gallon air Header tanktHERMCo Gas Mixer, Model 6105,S/N 14704, 0-50% CO2 in Argon 0-2000 SCFH, 10-50 PSIG outWEBEn JaRCo automaticCirculating Water Heater, ModelAJH120, S/N 59448, 1,200,000 BTU,Natural Gas2005 MInUtEMan Powerboss Floorsweeper/scrubber, Model TSS/90,S/N 1540010, LPG, Variable Speed,665 Hours2005 MInUtEMan PowerbossElectric Floor sweeper/scrubber,Model MC40005QP, S/N 15496115, -Volt, 743 Hours(2) lanDa Pressure Washers,Model PHW4-22024C, S/N 1109810-1000007, 4-GPM, 2,200-PSI, 225°Heat, Electric / Fuel Oil(2) lanDa Pressure Washers,Electric, Model EHW4-20024C, S/N11095000-162295 & 11095000-162293, 120°F Max, 4.2-GPM, 2,000-PSIadaptive VaR Compensatortransformer, Type 600/1700-2P, S/N

90062, 15 Step Capacitor, 1700 MaxKVA,Outdoor Typesola Hevi Duty transformer, 75-KVA, Model T2H75PRoFoRMER 30-KVa transformerHoBaRt & EXIDE 24 to 48-VoltBattery ChargersFMC sYntRon 8' x 12' Incline BeltConveyor (Parts / Repair)(20) 20,000-lb. Metal Horses (Parts /Repair)(3) VIDMaR Cabinets, (2) 11-Drawer,(1) 7-DrawerMarley Radiant Heaters(28) HIllMan Roller Machineskateslarge Quantity Heavy liftingEquipment, Chains, Plate Grabbers,Nylon Slings and Relatedassorted Hardware, Vee Belts,

Wiring, Furnace Filters, Crane Parts,Machine Repair Parts, Taper Shank Drills,Reamers, Taps, Collets, Chucks,Assorted Jobsite Tool Boxes, AirCirculators, Pedestal Fans, Pipe Stand,Roller Stands, Layout Tables, Transit &Laser Stands, Hose Material, Clamps,Ladders, Lifting Chains, Desks, Chairs,Files, Bookcases, Overhead Projectors

(2) OLIVER OF ADRIAN DRILL POINT GRINDERS

1 OF 2

SALE CONDUCTED BY:

513-738-3311

H H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H H

PUBLIC PUBLIC

DIRECTIONS

Sale managed by Myron Bowling Auctioneers, Inc.and conducted by Myron Bowling,

Buyer’s Premium: 15% Onsite, 18% Online

AUCTIONEERSIMPORTANT NOTICE:

H H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H H PLANT CLOSED

PUBLIC PUBLIC

All of the above is sold ”as is”, “where is” to the highest bidder orbidders for cash in accordance with our regular terms and condi-tions of sale. A deposit of 25% on all purchases is required in cash,certified or cashier’s check, made payable to Myron BowlingAuctioneers, Inc. Firm or personal checks accepted only if accom-panied by a letter of credit from your bank guaranteeing yourfunds. Balance due at conclusion of sale. All sales are subject tostate and/or local sales tax, unless a signed exemption form is pre-sented at the time of purchase. No merchandise may be removedwhile the sale is in progress. 15% buyer’s premium in effect forin-person bidding and 18% for online bidding at this sale.

TERMS OF SALE

Plant ClosInG

From the Tulsa International Airport, followsigns to OK-11 W and go 3.3 miles to US-75S. Go 3 miles South on US-75 to I-244 W /US-412 W. Go 5.8 Miles West on I-244 W andcontinue another mile on I-44 W to OK-66w/New Sapulpa Rd. Go 4.2 Miles to 98thStreet S. Turn right and go .6 miles toIndustrial Road. Turn left and follow signs toparking.

Hampton Inn - (800) 426-78667004 S Olympia Ave. 74132

Comfort Inn & Suites - (877) 424-642312119 Casper St. 74033

Holiday Inn Express - (888) 897-0088150 Aquarium Dr. 74037

NEW1984

FIRST CLASS MAIL!

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 5714

Myron Bowling AuctioneersP.O. BOX 369 ROSS, OHIO 45061

LODGING

Although information has been obtained from sources deemedreliable, the auctioneer makes no warranty or guarantee,expressed or implied, as to the accuracy of the informationherein contained. It is for this reason that buyers should availthemselves of the opportunity to make inspection prior to thesale. This brochure is intended to provide general information ofthe equipment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’s Office fora final listing. Items offered may or may not necessarily be sold asdescribed and/or photographed in this brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

VANGUARD WELDING MANIPULATOR TRACK MOBILE TM4000 RAILCAR TRANSFER

BERTSCH 3-1/2” X 10’ HEAVY DUTY PLATE BENDING ROLL

Updated2011

PLANT CLOSING


2110 Industrial Road in Sapulpa, OK 74066(Approx. 15 Miles Southeast of Tulsa)

THURSDAY, FEB. 13THSTARTS AT 10AMInspection: Day prior to auction

from 9AM - 4PM


2110 Industrial Road in Sapulpa, OK 74066

THURSDAY, FEB. 13THSTARTS AT 10AM

Inspection: Day Prior to auctionfrom 9AM - 4PM

2008Plant ClosInG

Industries (1991) Inc.

AUCTIONEERS | LIQUIDATORS | APPRAISERS

www.maynards.com

Documents

PLANT CLOSED Plant ClosInGs3.serverdata.com/ · Inspection: Day prior to auction from 9AM-4PM 2011 Rebuilt ... RansoME Weldi ng M anipulator, Model 1212, S/N 3226765, 12' Vertical