PIPE FITTERS’ LOCAL UNION 597 COURSE LISTING …...Equal Employment Opportunity Pledge “The JATC will not discriminate against apprenticeship applicants or apprentices based on

NIGHT CLASSES, SATURDAY CLASSES AND SEMINARS

2019–2020COURSE LISTINGPIPE FITTERS’ LOCAL UNION 597

How to Register

Log into Union Fusion https://pf597.unionfusion.net/ Click the “My Education” tab. Click the “Classes” tab.

Click the register button. Check the box(es) of the class(es) you want to register for.

Click the “Add To Registration Form” button.

Scroll to the bottom of the page. Re-check all the classes you want to register for.

Or select and remove classes you do not want to register for.

Click “Submit Registrations” to register, or “cancel” if you do not want to register.

Your classes should now appear as upcoming in your Union Fusion Profile.








REGISTER ONLINE: http://register.pftf597.org 1















REGISTER ONLINE: http://register.pftf597.org2

Welcome to Pipefitters Local 597

This handbook includes listings for all courses offered for 2019-20, including evening, Saturday classes and seminars. In general:

• Register for all courses online at http://register.pftf597.org.

• Class fees are payable on class start date. Cash or check accepted only.

• Evening class hours are 5:00 P.M. to 8:00 P.M.

• Saturday class and Seminar hours are 7:00 A.M. to 3:30 P.M.

• Evening classes are scheduled for 10 (ten) weeks per trimester, but may be accelerated at the Instructor’s discretion.

• Saturday classes meet for 3 (three) consecutive Saturdays, unless otherwise noted.

• Mokena hours are 7:00 A.M. to 8:00 P.M. Monday through Thursday, Friday 7:00 A.M. to 5:00 P.M., and Saturday 7:00 A.M. to 3:30 P.M.

• Crown Point hours are 7:00 A.M. to 8:00 P.M. Monday through Thursday, Friday 7:00 A.M. to 5:00 P.M., and Saturday 7:00 A.M. to 3:30 P.M.


CONTENTS

EEOC Pledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

MOKENA

Three Trimester Courses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

First Trimester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Second Trimester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Third Trimester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Saturday Seminars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Saturday Courses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Technology Courses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-15

Additional Courses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-24

Welding Courses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-27

CROWN POINT

First Trimester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Second Trimester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Third Trimester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29


Pipe Fitters’ Training Fund, Local Union 597Equal Employment Opportunity Pledge

“The JATC will not discriminate against apprenticeship applicants or apprentices based on race, color, religion, national origin, sex (including pregnancy and gender identity), sexual orientation, genetic information, or because they are an individual with a disability or a person 40 years old or older . The JATC will take affirmative action to provide equal opportunity in apprenticeship and will operate the apprenticeship program as required under Title 29 of the Code of Federal Regulations, Part 30 .”


THURSDAY CLASSES BEGIN: October 10, 2019

SATURDAY CLASSES BEGIN: October 12, 2019

Three Trimester Courses Begin: October 7, 2019

Courses Run Three Trimesters

CF 401 Centrifugal Chillers Room: 225 Book: None

BB 401 Boiler Burner Room: 130 Book: ESCO Institute Books Fee: $50.00 Pre-Requisite: Electrical & Print Reading

BB 401-S Boiler Burner - Saturday Course Room: 130 Book: ESCO Institute Books Fee: $50.00 Pre-Requisite: Electrical & Print Reading

Three Trimester Courses - Mokena

BB 401 Boiler Burner Room: 130 Book: ESCO Institute Books Fee: $50.00 Pre-Requisite: Electrical & Print Reading

MONDAY CLASSES BEGIN: October 7, 2019


RF 105-1 Basic Refrigeration Room: 226 Book: U.A. HVAC Manual Fee: $90.00

WB 303-1 Steam Systems Room: 224 Book: Steam Systems Fee: $50.00

EL 201-1 Basic Applied Electrical Room: 225 Book: Electrical Controls for Mechanical Equipment Fee: $75.00

WEDNESDAY CLASSES BEGIN: October 9, 2019

AB 401-1 Basic Absorption Chillers Room: 225 Book: None

CT 206 Introduction to DDC Room: 223 Book: Intro to Building Control

Systems Fee: $75.00

RF 301-1 Ammonia Industrial Refrigeration Room: 226 Book: None

ST 501-1 UA Star Exam Room: 224

* Course runs 6 weeks. Star Exam Given on Sat. Nov. 16, 2019

Book: None Fee: $136.00

MONDAY CLASSES BEGIN: October 7, 2019

First Trimester Begins: October 7, 2019

CT 201-1 Pneumatic Controls Room: 224 Book: Pneumatic Controls Fee: $50.00

MC 301-1 Middle Market Chillers 10 To 200 Ton Room: 130 Book: None

THURSDAY CLASSES BEGIN: October 10, 2019

HVAC Service Courses - Mokena


AB 402 -2 Advanced Absorption Chillers Room: 225 Book: None

CT 207 DDC - Johnson Controls Room: 223 Book: Intro to Building Control

Systems Fee: $75.00

ST 501-2 UA Star Exam - Recertification Room: 224

* Course runs 2 weeks Star Exam Given on Sat. Jan 18, 2020


RF 205-2 Intermediate Refrigeration Room: 226 Book: U.A. HVAC Manual Fee: $90.00 Pre-Requisite: Basic Refrigeration

WB 301-2 Basic Hydronics Room: 224 Book: Hydronics Fee: $50.00

CR 201-2 Liebert Unit Room: 130 Book: None

EL 202-2 Applied Electrical 2 Room: 225 Book: Electrical Controls for Mechanical Equipment Fee: $75.00 Pre-Requisite: Applied Electrical 1

MONDAY CLASSES BEGIN: January 6, 2020

WEDNESDAY CLASSES BEGIN: January 8, 2020

Second Trimester Begins: January 6, 2020


CT 202-2 Pneumatic Controls 2 Room: 224 Book: Pneumatic Controls Fee: $50.00

CT 205-2 Rooftop Service and Economizers Room: 223 Book: None

VF 401-2 Basic Variable Frequency Motor Drives Room: 226

* Course runs 6 weeks Book: Motors Fee: $75.00

THURSDAY CLASSES BEGIN: January 9, 2020

Second Trimester Begins: January 6, 2020

Prospective students may find out more information regarding a class by clicking on the link next to the class

information online (if available) .

HVAC Service Courses - Mokena


ST 501-3 UA Star Exam Room: 224 * Course runs 6 weeks

* Star Exam Given on Sat. May 16, 2020


CT 208 DDC - Honeywell Controls Room: 223 Book: Intro to Building Control

Systems Fee: $75.00

MONDAY CLASSES BEGIN: April 6, 2020

VF 402-3 Advanced Variable Frequency Motor Drives Room: 226

* Course runs 6 weeks Book: Motors Fee: $75.00

THURSDAY CLASSES BEGIN: April 9, 2020

Third Trimester Begins: April 6, 2020

RF 305-3 Supermarket Refrigeration Systems Room: 226 Book: U.A. HVAC Manual

WB 302-3 Advanced Hydronics Room: 224 Book: Hydronic Heating and Cooling Fee: $50.00 Pre-Requisite: Basic Hydronics

EL 203-3 Applied Electrical 3 Room: 225 Book: Electrical Controls for Mechanical Equipment Fee: $75.00 Pre-Requisite: Applied Electrical 2

WEDNESDAY CLASSES BEGIN: April 8, 2020


SATURDAY CLASS TIME: 7 A.M. to 3:30 P.M.

All listed seminars meet for 1 (one) Saturday .

SM 111 Ice Machines Class begins: October 19, 2019 Room: 226

SM 201-1 Pneumatics Open Calibration Lab Class begins: November 2, 2019 Room: 224

SM 501-G Heat Load Calculation Class begins: November 2, 2019 Room: 223

SM 408-3 Fulton Pulse Boiler Operation and Maintenance Class begins: December 7, 2019 Room: 130

SM 401 Large Motor Starters Wye Delta Wiring Class begins: January 18, 2020 Room: 225

SM 201-2 Pneumatics Open Calibration Lab Class begins: February 1, 2020 Room: 224

SM 402 Drive Motor to Compressor and Pump Alignment Class begins: February 1, 2020 Room: 225

SM 404 Gas Fired Absorption Hands-On Class begins: February 15, 2020 Room: 225

SM 408-1 Siemens LMV3 Combustion Controls Class begins: February 29, 2020 Room: 130

SM 408-2 Siemens LMV5 Combustion Controls Class begins: March 7, 2020 Room: 130

SM 502-G Cooling Load Calculation Class begins: April 11, 2020 Room: 225

SM 405 Centrifugal Hands-On Class begins: May 9, 2020 Room: 225

HVAC Saturday Seminars - Mokena


All listed courses meet for 3 CONSECUTIVE SATURDAYS .

CT-205-S1 Rooftop Service and Economizers Class begins: October 19, 2019 Room: 223 Book: None

RF 305 -S Supermarket Refrigeration Systems Class begins: November 2, 2019 Room: 225 Book: U.A. HVAC Manual Pre-requisite: Basic Refrigeration

VF 401-S Variable Frequency Motor Drives Class begins: November 2, 2019 Room: 226 Book: Motors Fee: $75.00

RF 501-S CO2 Refrigeration Systems Class begins: January 11, 2020 Room: 226 Book: None

CT 209-S DDC - Carrier Controls Class begins: February 8, 2020 Room: 223 Book: Intro to Building Control

Systems Fee: $75.00

CT 205-S2 Rooftop Service and Economizers Class begins: April 4, 2020 Room: 223 Book: None

CT 201-S Pneumatic Controls Class begins: April 11, 2020 Room: 224

* Course runs 6 weeks Book: Pneumatic Controls Fee: $50.00

RF 101-S Basic Air Conditioning and Refrigeration Class begins: April 11, 2020 Room: 226 Book: U.A. HVAC Manual Fee: $90.00

MC 301-S Middle Market Chillers 10 to 200 Ton Class begins: April 25, 2020 Room: 225 Book: None

SATURDAY CLASS TIME: 7 A.M. to 3:30 P.M.

HVAC Saturday Courses - Mokena


Technology Courses

TECHNOLOGY COURSES - MOKENA

First Trimester

BIM-1 Building Information Modeling (BIM) Level I

Class begins: October 7, 2019 Room: Computer Lab Mon.-Wed

BIM-2 Building Information Modeling (BIM) Level II Class begins: October 10, 2019 Room: Computer Lab *Thursday Start

LZ-1 Laser Scanning Level I Class begins: October 12, 2019 Room: Computer Lab ONE SATURDAY

TRI-1 Introduction to Trimble Class begins: October 19, 2019 Room: 109 ONE SATURDAY

DRN-1 Drone Certification Class begins: October 19, 2019 Room: 145-A ONE SATURDAY Prerequisite: Online FAA course https://www.faasafety.gov/gslac/

ALC/CourseLanding.aspx?cID=451

BLB-1 Introduction to Bluebeam Class begins: October 26, 2019 Room: Computer Lab ONE SATURDAY

XL-1 Introduction to Excel Class begins: November 2, 2019 Room: Computer Lab ONE SATURDAY

LZ-1 Laser Scanning Level I Class begins: November 9, 2019 Room: Computer Lab ONE SATURDAY

BLB-1 Introduction to Bluebeam Class begins: November 16, 2019 Room: Computer Lab ONE SATURDAY

BLB-2 Advanced Bluebeam Class begins: December 7, 2019 Room: Computer Lab ONE SATURDAY

DRN-1 Drone Certification Class begins: December 14, 2019 Room: 145-A ONE SATURDAY Prerequisite: Online FAA course https://www.faasafety.gov/gslac/


TRI-1 Introduction to Trimble Class begins: December 14, 2019 Room: 109 ONE SATURDAY

LZ-2 Laser Scanning Level II Class begins: December 21, 2019 Room: Computer Lab ONE SATURDAY



Second Trimester


Class begins: January 6, 2020 Room: Computer Lab Mon.-Wed.

BIM-2 Building Information Modeling (BIM) Level II

Class begins: January 9, 2020 Room: Computer Lab Tue.-Thu. Thursday Start

LZ1-1 Laser Scanning Level I Class begins: January 11, 2020 Room: Computer Lab ONE SATURDAY

DRN-1 Drone Certification Class begins: January 18, 2020 Room: 145-A ONE SATURDAY Prerequisite: Online FAA Course https://www.faasafety.gov/gslac/


TRI-1 Introduction to Trimble Class begins: January 18, 2020 Room: 109 ONE SATURDAY

BLB-1 Introduction to Bluebeam Class begins: January 25, 2020 Room: Computer Lab ONE SATURDAY

XL-1 Introduction to Excel Class begins: February 1, 2020 Room: Computer Lab ONE SATURDAY

LZ-1 Laser Scanning Level I Class begins: February 8, 2020 Room: Computer Lab ONE SATURDAY

BLB-1 Introduction to Bluebeam Class begins: February 15, 2020 Room: Computer Lab ONE SATURDAY

BLB-2 Advanced Bluebeam Class begins: March 7, 2020 Room: Computer Lab ONE SATURDAY

DRN-1 Drone Certification Class begins: March 14, 2020 Room: 145-A ONE SATURDAY Prerequisite: Online FAA Course https://www.faasafety.gov/gslac/


TRI-1 Introduction to Trimble Class begins: March 21, 2020 Room: 109 ONE SATURDAY

LZ-2 Laser Scanning Level II Class begins: March 21, 2020 Room: Computer Lab ONE SATURDAY



Third Trimester


Class begins: April 6, 2020 Room: Computer Lab Mon.-Wed.

BIM-2 Building Information Modeling (BIM) Level II

Class begins: April 9, 2020 Room: Computer Lab Tue.-Thu. Thursday Start

LZ-1 Laser Scanning Level I Class begins: April 11, 2020 Room: Computer Lab ONE SATURDAY

TRI-1 Introduction to Trimble Class begins: April 18, 2020 Room: 109 ONE SATURDAY

DRN-1 Drone Certification Class begins: April 18, 2020 Room: 145-A ONE SATURDAY Prerequisite: Online FAA Course https://www.faasafety.gov/gslac/


BLB-1 Introduction to Bluebeam Class begins: Class: April 25, 2020 Room: Computer Lab ONE SATURDAY

XL-1 Introduction to Excel Class begins: May 2, 2020 Room: Computer Lab ONE SATURDAY



Technology Courses





Third Trimester

LZ-1 Laser Scanning Level I Class begins: May 9, 2020 Room: Computer Lab ONE SATURDAY

BLB-1 Introduction to Bluebeam Class begins: May 16, 2020 Room: Computer Lab ONE SATURDAY

BLB-2 Advanced Bluebeam Class begins: June 6, 2020 Room: Computer Lab ONE SATURDAY

DRN-1 Drone Certification Class begins: June 13, 2020 Room: 145-A ONE SATURDAY Prerequisite: Online FAA Course https://www.faasafety.gov/gslac/


TRI-1 Introduction to Trimble Class begins: June 13, 2020 Room: 109 ONE SATURDAY

LZ-2 Laser Scanning Level II Class begins: June 20, 2020 Room: Computer Lab ONE SATURDAY


Additional Courses

BOLTING & REFINERY SAFETY COURSES - MOKENAFirst Trimester

Second Trimester

7110 OSHA 7110 Certification – Safe Bolting Procedures

Class begins: January 18, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY


Class begins: February 22, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY


Class begins: March 21, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY

RSO-1 Refinery Safety Orientation Class begins: October 12, 2019 Room 108 TWO SATURDAYS


Class begins: October 19, 2019 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY


Class begins: November 9, 2019 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY


Class begins: December 14, 2019 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY


RSO-2 Refinery Safety Orientation Class begins: April 11, 2020 Room 108 TWO SATURDAYS


Class begins: April 18, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY

BOLT-1 ASME Bolting Specialist PCC-1 Qualification

MONDAYS Class begins: May 4, 2020 Room 129 Fee: $325


Class begins: May 16, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY


Class begins: June 20, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY

BOLTING & REFINERY SAFETY COURSES - MOKENA

Note: Additional 7110 courses will be scheduled as needed. Please contact the Training Center for additional information. (708) 326-9240 x 2203

Third Trimester


Additional Courses

MEDICAL GAS COURSES - MOKENA

PPE & Proper Work Attire Required for Brazing.

First Trimester

MGR-1 Medical Gas Refresher Class begins: September 24, 2019 Room: East Shop Book: NFPA/ASSE Fee: $264.00 Tue.-Thu.

BZ-1 Brazing Course - Non Med Gas Class begins: September 24, 2019 Room: West Shop Tue.-Thu. (5 nights)

MG-1 Medical Gas Class begins: October 7, 2019 Room: East Shop Book: NFPA/ASSE Fee: $331.00 Mon.-Wed. * 4 years experience

MG-2 Medical Gas Class begins: October 8, 2019 Room: East Shop Book: NFPA/ASSE Fee: $331.00 Tue.-Thu. * 4 years experience

ASSE ASSE Recertification Exam Class begins: October 29, 2019 Fee: $75.00 ONE NIGHT *4:00 PM Start

BZ-2 Brazing Course - Non Med Gas Class begins: November 11, 2019 Room: West Shop Mon.-Wed. (5 nights)

MGR-2 Medical Gas Refresher Class begins: November 12, 2019 Room: East Shop Book: NFPA/ASSE Fee: $264.00 Tue.-Thu.

ASSE ASSE Recertification Exam Class begins: November 26, 2019 Fee: $75.00 ONE NIGHT *4:00 PM Start




Second Trimester

MG-3 Medical Gas Class begins: January 6, 2020 Room: East Shop Book: NFPA/ASSE Fee: $331.00 Mon.-Wed. * 4 years experience

MGR-3 Medical Gas Refresher Class begins: January 9, 2020 Room: East Shop Book: NFPA/ASSE Fee: $264.00 Tue.-Thu. Thursday Start.

MG-4 Medical Gas Class begins: January 9, 2020 Room: East Shop Book: NFPA/ASSE Fee: $331.00 Tue.-Thu. Thursday Start * 4 years experience

ASSE ASSE Recertification Exam Class begins: January 28, 2020 Fee: $75.00 ONE NIGHT *4:00 PM Start

BZ-3 Brazing Course - Non Med Gas Class begins: February 6, 2020 Room: West Shop Tue.-Thu. (5 nights)

MGR-4 Medical Gas Refresher Class begins: February 11, 2020 Room: East Shop Book: NFPA/ASSE Fee: $264.00 Tue.-Thu.

ASSE ASSE Recertification Exam Class begins: February 25, 2020 Fee: $75.00 ONE NIGHT *4:00 PM Start

BZ-4 Brazing Course - Non Med Gas Class begins: March 16, 2020 Room: West Shop Mon.-Wed. (5 nights)

MGR-5 Medical Gas Refresher Class begins: March 17, 2020 Room: East Shop Book: NFPA/ASSE Fee: $264.00 Tue.-Thu.


Additional Courses

Third Trimester



MG-5 Medical Gas Class begins: March 30, 2020 Room: East Shop Book: NFPA/ASSE Fee: $331.00 Mon.-Wed. * 4 years experience

MG-6 Medical Gas Class begins: March 31, 2020 Room: East Shop Book: NFPA/ASSE Fee: $331.00 Tue.-Thu. * 4 years experience

ASSE ASSE Recertification Exam Class begins: March 31, 2020 Fee: $75.00 ONE NIGHT *4:00 PM Start

MGR-6 Medical Gas Refresher Class begins: April 28, 2020 Room: East Shop Book: NFPA/ASSE Fee: $264.00 Tue.-Thu.

ASSE ASSE Recertification Exam Class begins: April 28, 2020 Fee: $75.00 ONE NIGHT *4:00 PM Start

BZ-5 Brazing Course - Non Med Gas Class begins: May 7, 2020 Room: West Shop Tue.-Thu. (5 nights)

ASSE ASSE Recertification Exam Class begins: May 26, 2020 Fee: $75.00 ONE NIGHT *4:00 PM Start


QUALITY CONTROL COURSES - MOKENA

Third Trimester

Second Trimester

ASME-3 ASME Endorsement Test Prep THURSDAYS Class Begins: April 9, 2020 Room: 129

NDE-3 Introduction to NDE Methods TUESDAYS Class Begins: April 14, 2020 Room: 129

QC-1 Introduction to QC/CWI Test Prep WEDNESDAYS Class Begins: January 8, 2020 Room: 129

ASME-2 ASME Endorsement Test Prep THURSDAYS Class Begins: January 9, 2020 Room: 129

NDE-2 Introduction to NDE Methods TUESDAYS Class Begins: January 14, 2020 Room: 129

First Trimester

NDE-1 Introduction to NDE Methods TUESDAYS Class Begins: October 8, 2019 Room: 129

ASME-1 ASME Endorsement Test Prep THURSDAYS Class Begins: October 10, 2019 Room: 129


Additional Courses

RIGGING COURSES - MOKENA

RERIG-1 UA Rigging Recertification Update ONE SATURDAY Class begins: September 28, 2019 Room: 109

RIG-1 UA Industrial Rigging Course MON. & WED. 5 WEEKS Class begins: October 7, 2019 Room: 108 Book: IPT Crane, and UA Rigging Fee: $60.00

SPST-67 Signal Person Safety Training MON. ONE NIGHT Class begins: October 14, 2019 Room: 108

RERIG-2 UA Rigging Recertification Update ONE SATURDAY Class begins: November 9, 2019 Room: 109

RIG-2 UA Industrial Rigging Course MON. & WED. 5 WEEKS Class begins: March 2, 2020 Room: 108 Book: IPT Crane, and UA Rigging Fee: $60.00

SPST-68 Signal Person Safety Training MON. ONE NIGHT Class begins: March 9, 2020 Room: 108

RIG-3 UA Industrial Rigging Course MON. & WED. 5 WEEKS Class begins: April 27, 2020 Room: 108 Book: IPT Crane, and UA Rigging Fee: $60.00

SPST-69 Signal Person Safety Training MON. ONE NIGHT Class begins: May 4, 2020 Room: 108

RERIG-3 UA Rigging Recertification Update ONE SATURDAY Class begins: December 7, 2019 Room: 108

RERIG-4 UA Rigging Recertification Update ONE SATURDAY Class begins: January 18, 2020 Room: 108

RERIG-5 UA Rigging Recertification Update ONE SATURDAY Class begins: February 8, 2020 Room: 109

RERIG-6 UA Rigging Recertification ONE SATURDAY Class begins: April 4, 2020 Room: 108

RERIG-7 UA Rigging Recertification ONE SATURDAY Class begins: June 6, 2020 Room: 109


SUPERVISION COURSES

FM 101-1 Supervision Course Class begins: October 7, 2019 Room: 126 Fee: $75.00 * UA Certification

PM 101 Project Management - Intro to Project Management/Computers

Class begins: October 10, 2019 Room: Computer Lab THURSDAYS Students should have basic

computer skills and a knowledge of Excel

FM 101-2 Supervision Course Class begins: January 6, 2020 Room: 126 Fee: $75.00 * UA Certification

PM 201 Project Management - Labor/Estimating/Bids

Class begins: January 9, 2020 Room: Computer Lab THURSDAYS

FM 101-3 Supervision Course Class begins: April 6, 2020 Room: 126 Fee: $75.00 * UA Certification

PM 301 Project Management - PLA/Scheduling/Completion

Class begins: April 9, 2020 Room: Computer Lab THURSDAYS

LABOR STUDIES

Additional Courses - Mokena


Additional Courses - Mokena

OSHA-30

VALVE COURSES

OSHA-30-1 OSHA 30 Class begins: October 12, 2019 Room: 108 Fee: $25.00

OSHA-30-2 OSHA 30 Class begins: February 1, 2020 Room: 108 Fee: $25.00

VLV-1 Valve Repair (40 hour course) Class begins: November 18, 2019 Room: TBD Class meets Mon and Wed 5-8 pm

And Sat 7 am-3:30 pm *UA Certification

Course meets 5 consecutive Saturdays


ORBITAL WELDING COURSE

WIRE WELDING COURSEWW-1 Wire Welding Course Class begins: October 7, 2019 Room: Weld Shop Mon-Wed 11 Weeks Pre-Requisite: UA-41 & UA-35

WW-2 Wire Welding Course Class begins: October 8, 2019 Room: Weld Shop Tue-Thu 11 Weeks Pre-Requisite: UA-41 & UA-35

WW-3 Wire Welding Course Class begins: January 6, 2020 Room: Weld Shop Mon-Wed 11 Weeks Pre-Requisite: UA-41 & UA-35

WW-4 Wire Welding Course Class begins: January 7, 2020 Room: Weld Shop Tue-Thu 11 Weeks Pre-Requisite: UA-41 & UA-35

WW-5 Wire Welding Course Class begins: April 6, 2020 Room: Weld Shop Mon-Wed 11 Weeks Pre-Requisite: UA-41 & UA-35

WW-6 Wire Welding Course Class begins: April 7, 2020 Room: Weld Shop Tue-Thu 11 Weeks Pre-Requisite: UA-41 & UA-35

AOW-1 Orbital Welding Course Class begins: October 8, 2019 Room: 128 Tue-Thu 5 Weeks Pre-Requisite: Must have a UA

GTAW Certification

AOW-2 Orbital Welding Course Class begins: November 12, 2019 Room: 128 Tue-Thu 5 Weeks Pre-Requisite: Must have a UA

GTAW Certification

AOW-3 Orbital Welding Course Class begins: January 9, 2020 Room: 128 Tue-Thu 5 Weeks Thursday Start Pre-Requisite: Must have a UA

GTAW Certification

AOW-4 Orbital Welding Course Class begins: February 11, 2020 Room: 128 Tue-Thu 5 Weeks Pre-Requisite: Must have a UA

GTAW Certification

AOW-5 Orbital Welding Course Class begins: March 17, 2020 Room: 128 Tue-Thu 5 Weeks Pre-Requisite: Must have a UA

GTAW Certification

AOW-6 Orbital Welding Course Class begins: April 28, 2020 Room: 128 Tue-Thu 5 Weeks Pre-Requisite: Must have a UA

GTAW Certifications


POLY FUSION COURSECourse meets Tuesday and Thursday for 6 classes .

First Trimester

Second Trimester

PEF-1 Poly Fusion Course Class begins: September 24, 2019 Room: 109 * Starts on Tuesday

PEF-2 Poly Fusion Course Class begins: October 29, 2019 Room: 109 * Starts on Tuesday

PEF-3 Poly Fusion Course Class begins: November 26, 2019 Room: 109 * Starts on Tuesday

PEF-4 Poly Fusion Course Class begins: January 9, 2020 Room: 109 * Starts on Thursday

PEF-5 Poly Fusion Course

Class begins: February 11, 2020 Room: 109 * Starts on Tuesday

PEF-6 Poly Fusion Course

Class begins: March 5, 2020 Room: 109 * Starts on Thursday

Third Trimester

PEF-7 Poly Fusion Course Class begins: April 9, 2020 Room: 109 * Starts on Thursday

PEF-8 Poly Fusion Course Class begins: May 7, 2020 Room: 109 * Starts on Thursday

Welding Courses - Mokena


ALLOY WELDING COURSES

PIPE LINE COURSES

PL-1 Pipe Line Course Class begins: October 7, 2019 Room: Weld Shop Mon-Wed 11 Weeks

PL-2 Pipe Line Course Class begins: October 8, 2019 Room: Weld Shop Tue-Thu 11 Weeks

PL-3 Pipe Line Course Class begins: January 6, 2020 Room: Weld Shop Mon-Wed 11 Weeks

PL-4 Pipe Line Course Class begins: January 9, 2020 Room: Weld Shop Tue-Thu 11 Weeks

PL-5 Pipe Line Course Class begins: April 6, 2020 Room: Weld Shop Mon-Wed 11 Weeks

PL-6 Pipe Line Course Class begins: April 9, 2020 Room: Weld Shop Tue-Thu 11 Weeks

AL-1 Alloy Welding Class begins: October 7, 2019 Room: Weld Shop Prerequisites: UA-41 & UA-35 Mon-Wed 11 Weeks

AL-2 Alloy Welding Class begins: October 8, 2019 Room: Weld Shop Prerequisites: UA-41 & UA-35 Tue-Thu 11 Weeks

AL-3 Alloy Welding Class begins: January 6, 2020 Room: Weld Shop Prerequisites: UA-41 & UA-35 Mon-Wed 11 Weeks

AL-4 Alloy Welding Class begins: January 9, 2020 Room: Weld Shop Prerequisites: UA-41 & UA-35 Tue-Thu 11 Weeks

AL-5 Alloy Welding Class begins: April 6, 2020 Room: Weld Shop Prerequisites: UA-41 & UA-35 Mon-Wed 11 Weeks

AL-6 Alloy Welding Class begins: April 9, 2020 Room: Weld Shop Prerequisites: UA-41 & UA-35 Tue-Thu 11 Weeks

Crown Point Training Center

BOLTING & REFINERY SAFETY COURSES - CROWN POINTFirst Trimester


Class begins: October 2, 2019 Room 129 Fee: $325.00 WEDNESDAYS


Class begins: October 12, 2019 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY


Class begins: November 16, 2019 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY

Second Trimester


Class begins: January 6, 2020 Room 129 Fee: $325.00 MONDAYS


Class begins: January 11, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY

RSO-2 Refinery Safety Orientation Class begins: January 11, 2020 Practical Room TWO SATURDAYS


Class begins: February 15, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY


Class begins: March 14, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY



BOLTING & REFINERY SAFETY COURSES - CROWN POINT


Class begins: April 11, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY


Class begins: May 9, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY


Class begins: June 13, 2020 8 hour class Practical Shop Fee: $50.00 ONE SATURDAY

Note: Additional 7110 courses will be scheduled as needed. Please contact the Training Center for additional information. (708) 326-9240 x 2203

Third Trimester

Documents

PIPE FITTERS’ LOCAL UNION 597 COURSE LISTING …...Equal Employment Opportunity Pledge “The JATC will not discriminate against apprenticeship applicants or apprentices based on