Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
15.88 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
1
211.00 g
d
MK3/S
Summary
This a remix of the original by kapy27. The additional weight (8x M10 nuts)added and inprinted to the base plate. Levers are formed from M6 longbolts. Better and more stable pillar support.
Hobby & Makers > Tools
press drill dremel
Category: Machine Tools
Print Settings
Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Doesn'tMatter Infill: 25 Filament: PLA, Prusament PLA various
Post-Printing
Needed to complete:
Various stainless hex nuts and bolts (M3, M4, M5)
p pj
Pillar Drill Press -Dremel
VIEW IN BROWSER
updated 19. 1. 2020 | published 19. 1. 2020
• •
Print Files (.gcode) DOWNLOAD ALL FILES
19.6 MB
15.88 hrs f 0.20 mm k 0.40 mm h PLA 210.50 g d MK3/S
updated 19. 1. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
731.2 KBupdated 19. 1. 2020
111.2 KBupdated 19. 1. 2020
714.8 KBupdated 19. 1. 2020
174.9 KBupdated 19. 1. 2020
3.7 MBupdated 19. 1. 2020
approx. 15mm spring3x M6 100mm hex bolts to form levers8x M10 hex nuts as a weight imprinted in the base plate
• •
dremel_drill_02mm_pla_mk3_15h53m.gcode
01-base.stl
02-pillar.stl
03-support_dremel.stl
04-gear.stl
05_height_control_tenon.stl
109.3 KBupdated 19. 1. 2020
237.1 KBupdated 19. 1. 2020
81.5 KBupdated 19. 1. 2020
214.9 KBupdated 19. 1. 2020
35.7 KBupdated 19. 1. 2020
868.0 KBupdated 19. 1. 2020
1.7 MBupdated 19. 1. 2020
Find source .stl files on Thingiverse.com
License
This work is licensed under a Creative Commons (4.0 International License)
06-dremel_insert.stl
07-pillar_support.stl
08-adjust_button.stl
09-adjust_support.stl
10-brake.stl
11-lever_end_ball.stl
dremel.3mf
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition