Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
HTT-Tape
HIGH TECH TAPE is a tape that can guarantee structural bonding.HIGH TECH TAPE is made of a closed cell structure and consequently is 100% liquid proof.HIGH TECH TAPE has a high chemical resistance.HIGH TECH TAPE is temperature resistant in negative as well as positive temperature fl uctuations.The protective foil can be removed easily.
double-sided tape with an 100% closed cell structure through and through acrylic fl exible very high, immediate adhesive strength replacable
Adhesive : acrylic through and throughProtective foil : red polyethyleneColour : grey acrylicPressure resistance : cures by pressingTemperature resistance : for 4 hours 150°C for 200 hours 90°CSolvent resistance : non-solubleUV-resistance : OKLiquid density : perfectShearing force : 72 N/cm²Max. Tensile strength : 82 N/cm²Density : 740 kg/m²Thickness : 0,8 mmShelf life : 12 months in the original closed packing. Store in a closed room at 10°C till 30°C.
554068000-PI-HTT TAPE-EN-070118-P1/2
GENERAL INFO
TECHNICAL INFORMATION
PACKAGING 6 mm Article number 55406800012 mm Article number 55412800019 mm Article number 55419800025 mm Article number 554258000
Length : 10 metres Colour : grey Abbreviation : HTT
Novatio Europe N.V., Industrielaan 5D, B-2250 Olen, Tel.: +32-14-25.76.40, Fax: [email protected], www.novatio.com
- bonding of spoilers, decorative frames, emblems, electrical components, decorative covers on side mirrors- bonding of roof- and wall panels on framework with buses and trucks, protective strips of vestibules, mirrors, number plates, etc.
554068000-PI-HTT Tape-EN-070118 -P2/2
USEFUL INFORMATION
APPLICATIONS AUTOMOTIVE
- The surface always has to be dry, grease-proof and dust free.- Processing temperature : +15°C and 30°C. - Drying times : high immediate adhesive strength After 20 min = 30 % adhesive strength After 24 hours = 60 % adhesive strength After 72 hours = 100 % adhesive strength
DIRECTIONS FOR USE
- Some synthetic materials that are really hard to bond, can be increased by roughening them up.- The adhesive strength of some synthetic materials can be inicreased by treating them first with the Primer 903.- Bonded pieces that are warmed up, achieve their ultimate adhesive strength a lot faster. For ex. 5 min. at 65°C = 80 % adhesive strength 1 hour at 65°C = 95 % adhesvie strength
- sanitary and kitchen arrangement : bonding of different accessories and fittings on formica, tiles, metal, inox, lacquer, glass, etc.- name- and information plates for permanent attachments- electronics : rails in switch boxes, assembling of all electronics components, even at high temperature fluctuations
APPLICATIONS INDUSTRY
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Novatio makes no warranties as to the accuracy of completeness of the information, and disclaims any liability regarding its use. Novatio’s only obligations are those in the Standard terms and conditions of Sale for this product, and in no case will Novatio be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product.