PG.05.01.T.E

6-21June 2000

PHO

TOEL

ECTR

ICSE

NSO

RS6

Photoelectric SensorsOEM Prism Sensors

Retroreflector(Not Included)

Sensor

For Complete System, Order Sensor and Retroreflector

(See Section 8)

Retroreflector(Not Included)

Sensor

For Complete System, Order Sensor and Retroreflector

(See Section 8)

Model Selection — Sensors

� Contact factory for approval status.� Contact factory for availability.

Operating Voltage

Sensing Range

Optimum Range Field of View Output Type Connection Type Catalog Number

Light Operate Dark Operate

3-Wire and 4-Wire Sensors18 mm Diameter Polarized Reflex — Forward Viewing �

10 – 30V DC 10 feet(3m)

0.1 to 8 feet (0.03 – 2.4m)

3 inch (76 mm)Diameter at 12 feet (3.6m)

NPN 6-foot Cable 14156ALN17B1 14156ADN17B1

4-pin Micro DC Connector

14156ALN07B1 14156ADN07B1

PNP 6-foot Cable 14156ALP17B1 14156ADP17B1

4-pin Micro DC Connector

14156ALP07B1 14156ADP07B1

NPN and PNP

6-foot Cable 14156AL17B1 14156AD17B1

4-pin Micro DC Connector

14156AL07B1 14156AD07B1

18 mm Diameter Polarized Reflex Right-Angle Viewing �

10 – 30V DC 10 feet(3m)

0.1 to 8 feet (0.03 – 2.4m)

3 inch (76 mm)Diameter at 12 feet (3.6m)

NPN 6-foot Cable 14156RLN17B1 14156RDN17B1

4-pin Micro DC Connector

14156RLN07B1 14156RDN07B1

PNP 6-foot Cable 14156RLP17B1 14156RDP17B1

4-pin Micro DC Connector

14156RLP07B1 14156RDP07B1

NPN and PNP

6-foot Cable 14156RL17B1 14156RD17B1

4-pin Micro DC Connector

14156RL07B1 14156RD07B1

18 mm DiameterDiffuse ReflectiveForward Viewing ��

10 – 30V DC 8 inches(200 mm)

0.1 to 5 inches (3 – 127 mm)

2 inch (51 mm)Diameter at 5 inches (127 mm)

NPN 6-foot Cable 13156ALN17B1 13156ADN17B14-pin Micro DC Connector

13156ALN07B1 13156ADN07B1

PNP 6-foot Cable 13156ALP17B1 13156ADP17B14-pin Micro DC Connector

13156ALP07B1 13156ADP07B1

NPN and PNP

6-foot Cable 13156AL17B1 13156AD17B14-pin Micro DC Connector

13156AL07B1 13156AD07B1

(Contact factory for availability of these models.)

24 inches(609 mm)

0.1 to 15 inches (3 – 381 mm)

6 inch (152 mm)Diameter at 15 inches (381 mm)

NPN 6-foot Cable 13157ALN17B1 13157ADN17B14-pin Micro DC Connector

13157ALN07B1 13157ADN07B1

PNP 6-foot Cable 13157ALP17B1 13157ADP17B14-pin Micro DC Connector

13157ALP07B1 13157ADP07B1

NPN and PNP

6-foot Cable 13157AL17B1 13157AD17B14-pin Micro DC Connector

13157AL07B1 13157AD07B1

18 mm DiameterDiffuse ReflectiveRight-Angle Viewing �

10 – 30V DC 8 inches(200 mm)

0.1 to 5 inches (3 – 127 mm)

2 inch (51 mm)Diameter at 5 inches (127 mm)

NPN 6-foot Cable 13156RLN17B1 13156RDN17B14-pin Micro DC Connector

13156RLN07B1 13156RDN07B1

PNP 6-foot Cable 13156RLP17B1 13156RDP17B14-pin Micro DC Connector

13156RLP07B1 13156RDP07B1

NPN and PNP

6-foot Cable 13156RL17B1 13156RD17B14-pin Micro DC Connector

13156RL07B1 13156RD07B1

24 inches(609 mm)

0.1 to 15 inches (3 – 381 mm)

6 inch (152 mm)Diameter at 15 inches (381 mm)

NPN 6-foot Cable 13157RLN17B1 13157RDN17B14-pin Micro DC Connector

13157RLN07B1 13157RDN07B1

PNP 6-foot Cable 13157RLP17B1 13157RDP17B14-pin Micro DC Connector

13157RLP07B1 13157RDP07B1

NPN and PNP

6-foot Cable 13157RL17B1 13157RD17B14-pin Micro DC Connector

13157RL07B1 13157RD07B1

6-20

PG.05.01.T.E

June 2000

PHO

TOELECTRIC

SENSO

RS6

OEM PrismPhotoelectric Sensors

ContentsOverview. . . . . . . . . . . . . . . . . . . . . . 6-20Model Selection . . . . . . . . . . . . . . . . 6-21Wiring Diagrams . . . . . . . . . . . . . . . 6-22Model Selection, Accessories . . . . 6-23Specifications . . . . . . . . . . . . . . . . . . 6-24Dimensions. . . . . . . . . . . . . . . . . . . . 6-24

OEM Prism sensors are very similar to our standard cost-effective Prism family except that they have been optimized for high volume OEM use. In place of the isolated output found in the standard models, the OEM Prism features dual or single discrete outputs for simple wiring. In addition, OEM Prism sensors are shipped bulk packed for easier handling by the installer and less packaging to discard. Forward and right-angle viewing models feature identical gain and optical characteristics for the best fit on your machine. A gain control allows quick adjustment for peak optical performance in a variety of applications.

Polarized reflex units eliminate reli-ability problems when sensing shiny objects. A visible red sensing beam allows you to see exactly where the sensors are aimed for easier setup. Models are available with light or dark activated operation.

The unique threaded body with flat sides allows quick mounting in a 3/4 inch hole or against any flat surface. Internal components are rigidly sealed in a solid encapsulated package for excellent performance in high-vibration and high-shock applications.

Approvals

For the most current information on this product, visit our web site at: www.sensingsolutions.com

Photoelectric SensorsOEM Prism Sensors

Product Features� Small size for use in a wide variety of applications and locations � Sensors are shipped bulk-packed for the convenience of high volume users� High sensing power for longer ranges and resistance to dust and dirt � Adjustable gain control to ensure peak optical performance in each

application � High noise immunity eliminates problems associated with electrical noise � Dual or single discrete outputs for simple wiring� Short circuit protection � Quick 1.2 mS response time� Output status LED is highly visible from a wide 300° angle � Choice of cable for low cost wiring, or micro-connector for quick installation

or replacement� Custom cable lengths are available

For Customer Service in the U.S. call 1-800-356-1243,in Canada call 1-800-268-3578.

For Application Assistance in the U.S. and Canadacall 1-800-426-9184.

High Performance 18 mm Tubular Sensors Packaged for High Volume Users

Low

Higher

Higher

Performance and Features

Prism &OEM Prism

Comet Series

Pri

ce

Product ComparisonThe cost-effective Prism Series, OEM Prism and premium Comet Series all share the same 18 mm flat-sided hous-ing. This results in the largest inter-changeable sensor family available, allowing you to select from well over 250 different models to solve the wid-est variety of sensing applications.

6-24

PG.05.01.T.E

June 2000

PHO

TOELECTRIC

SENSO

RS6

Photoelectric SensorsOEM Prism Sensors

Specifications

� NOTE: Photoelectric sensors conform to NEMA tests as indicated above, however, some severe washdown applications can exceed these NEMA test specifications. If questions about a particu-lar application arise, contact Cutler-Hammer Sensor Applications Department, 1-800-426-9184.

DC Only Models

Input Voltage 10 to 30V DC

Power Dissipation 1W maximum

Output Type NPN only, PNP only, or NPN and PNP, by model

Output Operation Dark operate models: ON when beam is blocked; OFF when beam is not blockedLight operate models: ON when beam is not blocked: OFF when beam is blocked

Current Switching Capacity 100 mA maximum

Off-State Leakage 10 µA maximum

On-State Voltage Drop NPN: 2.0V at 100 mA; PNP: 2.5V at 100 mA

Short Circuit Protection Protected against dead shorts only.Operation: output is continuously retried at 3 mS intervals and will automatically reset when short is removed (no visual indication of a short circuit condition).CAUTION: will not protect against overloads between 100 mA and 1A.

Response Time 1.2 mS

Light/Dark Operation Specified by Catalog Number

Temperature Range Operating: -13° to +131°F (-25° to +55°C);Storage: -13° to +158°F (-25° to +70°C)

Sunlight Immunity 1,000 foot-candles

Material of Construction Lens: polycarbonate; Cable jacket: PVC; Body: structural polyurethane foam (do not expose to concentrated acids, alcohols or ketones)

Cable Models 6 foot long; 3-wire NPN or PNP models; 4-wire NPN/PNP models

Connector Models Micro-Connector, 4-pin male

Vibration and Shock Vibration: 30g over 10 Hz to 2 kHz; Shock: 50g for 10 mS 1/2 sine wave pulse

Indicator LED Lights steady when output is ON; OFF when output is OFF: OFF when output is in short circuit mode

Enclosure Ratings NEMA 1, 2, 3, 4, 4X, 6, 12 and 13 �

Approximate Dimensions — Shown in Inches (mm)

Gain Adjustment

LED

0.47

M 18 x 1.0 Thread (mm)(fits into a 0.75 inch hole)

0.5

0.125 Diameter Thru Holes (2 places) Use #4 Hardware Only

2.75

1.000.750.32

0.11

0.25Cable length*1.69

0.56

Micro Connector(quick-disconnect versions only)

*Quick-disconnect versions: 7 ±1 in. Cable versions: 6 feet

0.5

1.07

Right Angle Viewing Models

0.6

0.6

Gain Adjustment

LED

0.47

M 18 x 1.0 Thread (mm)(fits into a 0.75 inch hole)

0.2

"A"1.00"B"0.32

0.11

0.25Cable length*1.69

0.56

Micro Connector(quick-disconnect versions only)

*

0.125 Diameter Thru Holes (2 places) Use #4 Hardware Only

Quick-disconnect versions: 7 ±1 inchCable versions: 6 feet

0.7

Right Angle Viewing Models

Forward viewing: A = 2.35; B = 0.8Right angle viewing: A = 2.6; B = 0.65

Diffuse Reflective Models

Polarized Reflex Models