Philips continuously strives to improve its products ... · Switch on your phone, the screen shows "Insert SIM", press SOS to dial emergency call. In Europe the standard emergency

�� Philips continuously strives to improve itsproducts. Therefore, Philips reserves the rights torevise this user guide or withdraw it at any timewithout prior notice. Philips provides this userguide "as is" and does not accept, except asrequired by applicable law, liability for any error,omission or discrepancy between this user guideand the product described.The device is meant tobe connected to GSM /GPRS network.

Hang up andon/off key

Camera keyKeypad

Touch Screen

(1) Navigation keys will be represented in the manual bythe following signs: .

Call and pick up key

Navigationkeys (1)

Left softkey

Shortcuts

Earpiece

Back of the phone:camera lens

Memory card slot

Chargeheadset jack and USB

Right softkey

Stylus

��

Switch phone On/Off Press and hold .

Store Numbers intoPhonebook

Enter the phone number andtap Save or press to save.

Make a call Enter the phone number andtap or press to dial.

Answer a call Press when your phonerings.

Reject a call Press when your phonerings.

End a call Press .

�

There are five permanent hard icons at the bottom ofthe touch screen.

Tap them to access the corresponding menu inevery operation condition except the keypadlocked, then return to the idle mode after finishingthe access.

Some events may modify the idle screen (missedcall, new message, etc.).

Press and to perform the function locatedat the bottom of the touch screen.

Press to access the main menu in idle mode,then tap one of five icons on the top of the screen toaccess the corresponding menu and its submenu.You also can press the navigation keys to view allmenus.

Adjust conversationvolume

Press during a call.

Switch to silent mode Press and hold in idlemode.

Lock the keypad Press and hold in idlemode.

Unlock the keypad Press then press .

Access the �� Press in idle mode.

Access the �� Press in idle mode, "Calllogs" display your recent"Missed Calls", "DialedCalls" and "Received Calls".

Access the �� Long press in idle mode.

Quickly return toidle

Press .

� � ��

To access the main menu.

To access the ��.

To access the ��.

To access the �� interface.

To access the ��interface.

��

� ��

��

�

�� !��"��#�$�� %&&��'��#��!��(��%)� *�� +�� (

��&��,��-�� ,��$�� ./'�� .0�� '�� 1 -%"�� -��-��'��1� ��*�� 0$��

��2�3�� !��$�� '�� 4�� -�� '��'��5�%�! ��'�� 5�%�! ��'��6� �� '��

�� 5-��0��(��7��18 ��2��#��(9� ��*��(5�� 7

#�� ,9��'��,��'��,9�� 1�� '�� *��$��4��&&� ��#

(��2��(�� (

�

��(�� (�� -��7�� *��7"�� *��78+5-�)��7��'$�� ,0��,8+�� ,

7�� 1��'��1��'�� "��&��'��6��$�-��'��(�� '��7��!��,)��4� ��,

,��83��.5��.��#1�� #1�2:��#1�� #1

� ��;�� !��#�

�� #�2��!��#(��'�� #,�'� �&� ��!��'��&� ��#.� ��$��(1

� ��

� !��

Please read the safety instructions in the "Precautions"section carefully before using.

Before using your phone, you must insert a validSIM card supplied by your operator or retailer. TheSIM card contains your service details and memoryin which you can store phone numbers andmessages.

1. Make sure that the phone is switched off.2. Press on the back cover and slide it downwards

to remove it.

3. Hold the latch to lift up the battery.

4. Place the SIM card in its slot, with the goldencontacts facing downwards.

5. With the metallic contacts facing downwards,press the battery into its slot until it locks intoplace.

"�� #"��

�� #

6. Replace the back cover by sliding up into itsslots until it stops.

Please use special styluses only appoved byPhilips.

Pull the stylus out of its holder as follow:

If you draw out the stylus, you will use it morecomfortably.

Mostly, using the stylus likes using a mouse on acomputer except writing.

#��Softly touch an icon or a menu once on the screenwith the stylus to select an option, execute anapplication or move a scroll bar.

��Softly touch a scroll bar and hold the stylus on thescreen, then drag it to move the scroll bar.

$��Softly write words, numbers in the editing interfaceon the screen to input you want.

To prevent scratch the screen, do not use an actualpen, pencil or other sharp objects instead of stylus.

Press and hold until the power-on/offanimation is showed on the screen.When switch on the phone, the phone may remindyou to enter the PIN code. The PIN code ispredefined and supplied by your operator or retailer.To personalize the PIN code, see "ChangePassword" on page 47.

%��

#��

( ��

If you enter an incorrect PIN code for three times,your SIM card is blocked. To unblock it, you mustrequest the PUK code from your operator.

Your phone is powered by a rechargeable battery. Anew battery is partially charged and a sound alertwill warn you when the battery level is low. If thebattery is empty, the battery symbol indicators willreappear after the battery is charged up for 2 or 3minutes.

In idle mode, tap the battery icon to view itsremaining capacity.

1. Once the battery and back cover are attachedto the phone, plug the charger to the connector(supplied with the phone, in the box) into thesocket at the base of the phone on one end.Check that the arrow on the connector is facingtowards the phone. Then plug the other end ofthe charger to an easily accessible AC powersocket.

To prevent damage of the phone, do not make acall or send SMS while the battery is charging!

2. The battery symbol indicates the state ofcharge.

3. When the battery is fully charged, you candisconnect the charger by unplugging it.

If you don’t use the phone for a long time, pleasefetch out the battery.

Keeping the charger plugged to the mobile won’tdamage the battery after it is fully charged.

1. Remove the protective rubber cap outwards.

& ��

"��'�� (#��

�� 7

2. Gently slip the card into the Micro-SD cardslot with the card's golden contact facing youfrom the bottom side of the card.

3. To remove the Micro-SD card, gently press thetop of it inside its slot. When it pops up, youmay remove it from the phone.

, ��&��

) ��

��1. In idle mode, enter the phone number directly,

or tap or then tap numbers on the on-screen keyboard.

2. Tap or press to dial the number, or tap access the phonebook to find the number.

3. Tap Abort or press to end the call.

For an international call, press * twice quickly toenter the "+" symbol as the international prefix.

�� 1. In idle mode, press to access the list. 2. Select a contact in the list, then press to

dial the number (To see "Phone Book" formore information).

*��*��#"�� If you know the serial number(for example:5) ofyour caller in SIM phonebook, you can press 5# inidle mode directly to show the corresponding name

stored in SIM phonebook, then press to dial thenumber.*��In idle mode, press to access Call Logs list.Select a number and press to dial the number.

��"+��

This function depends on your subscription andnetwork in China and HongKong only, contact toyour operator for configuration paramaters.

You can make an IP call after setting IP number andactivating the function.1. Select the number from the phonebook.2. Tap Option or press to select IP Dial to

make an IP call.3. Press to end the call.

��Emergency numbers is the emergency servicenumber in your local country or area. You can dialthem even if you have not yet inserted a SIM card orentered your PIN.#"��In idle mode, enter emergency number directly,then press to dial.

��

��&�� .

$�� #"��Switch on your phone, the screen shows "InsertSIM", press SOS to dial emergency call.

In Europe the standard emergency number is 112,in the UK it is 999.

If you apply the function of the caller ID, thenumber of the caller will be displayed whilereceiving a call. If the number has been stored inphonebook, then the corresponding name wil be dis-played instead of the number.1. Answer the call: press . During the call,

press H-Free to activate handsfree. Tocancel handsfree you can press H-Heldagain to deactivate it.

If you activate "Any Key" to answer, press anykey(except and ) to answer the call.

For your own comfort and safety, ensure you movethe phone away from your ear by handsfree,especially when increasing the volume.

2. Reject the call: press . If you haveactivated Call Divert, the call is diverted toanother number or voice mail.

3. Hang up: press .

During a call, tap Option or press to access thefollowing options.

+ ��To access the phonebook.

��,-��-��.You can choose mute so that your caller can’t hearyou or unmute the microphone when mute is on.

#��'��To record a conversation during a call, select SoundRecorder and press . While recording you canpress Pause/Cont.. To stop recording, press

, enter the file name and press to save.

In most countries, recording telephone conversat-ion is subject to legislation. We advise you to notifythe caller if you intend to record your conversationand only do so if they agree.

-� ��During a call, tap Option or press to enter othermenu for viewing or editing , for instance, messagesand so on.

/��

-��

�1 ��&��

The ability to handle two or more calls at one timeand to make conference calls.

The function depends on your operator andsubscription.

��You can make a second call during an active call orwith a call on hold. The first call is put on hold whilethe second number is dialled. Then you can press

to access the following options:• Swap to toggle between calls.• Conference to introduce a caller into the con-

ference call.

/��You can answer a second call during an activecall.When you receive a second call, the phoneemits a beep alert and the screen displays theinformation of the call. Then you can:

To receive a second call, you must have deactiva-ted ��&�$�� for voice calls and activated ��$�� ..

0�� There are two methods to lock the keypad:1. To lock the keypad automatically by setting the

interval.2. In idle mode, press and hold .%�� Press and quickly to unlock the keypad.

You can make emergency calls even if the keypadis locked.

��

Press To open the options list. You canselect End to end the current call, thenanswer the incoming call.

Press To reject the call.

Press To answer the second incoming call(while the first one is put on hold).Then press , and select:• Swap to toggle between calls,• Conference to introduce a new caller

into the conference call.

Press To end the current call, then answerthe incoming call.

0��%��

��&��

To activate the silent mode, press and hold until themessage of "Silent Activated" and icon shows on thescreen.To deactivate the silent mode, press and hold again until the suggestive message shows on the screenand the icon disappears.

After insert a memory card into the slot, you havetwo memory.

� �� The capacity of the phone memory is 11MB.1. As a memory, please switch the phone off.

If you connects the phone with a computer withoutswitching it off, the memory won’t be identified bythe computer.

2. Connect the phone with PC via the USB cable.3. Copy the file from PC to the phone or edit the

existent file on the phone by PC.

� ��This memory can be identified by PC however youshut the phone or not , and the operation is as above.

/��

��

�� 2�3�� !��

1 ��2��

You can select the input methods to enter Englishwords, symbols and numbers. The icons appearedon the screen indicate the active text mode.

There are three methods to switch the method inediting interface:1. Tap the input icon on top left corner of the screen;2. Tap the input icon on the bottom of the screen;3. Press to switch.

The following table lists the operations of thevarious keys in editing interface:

The following table lists the operations of thevarious icons in editing interface:

You can write directly on the center of the screen.According to your input, the phone will list somesimilar words at the bottom of the screen.

Before writing, please switch to the correspondinginput method.

You can use the analog keypad to input words,numbers or symbols quickly.

#��

3��

To delete the characters or end editing.

To confirm input or enter option menu.

To move the cursor, select letter, word orsymbol from the list.

To return to idle mode.

To enter the symbols list.

To switch the input method.

To unfold the analog keypad.

To fold the analog keypad.

To unfold/fold the analog keypad of symbols.

To delete the word on the left cursor.

To add a blank.

To goto a new paragraph.

$��

/��

2�3�� !��

To select this method, press until "ABC" or"abc" appeared on the screen. It requires multiplekey press to reach the desired character. Forexample, the letter "h" is the second letter on the key4, so you must press it twice to enter "h". If twoletters in turn are on the same key, just wait a fewseconds for the cursor to appear.

�2��4�� 5�-��54Please press key 4, 4 (�H�) 6, 6, 6 (�6O), 6 (M6/),3, 3 (�E4). Letters, numbers and symbols are located on eachkey as shown in the table below:

This is an intelligent editing mode for messagesincluding a comprehensive dictionary. You canenter text more quickly by the smart input method.Press until "eZi ABC" or "eZi abc" appeared onthe screen. Press only once the key correspond-ingto each letter needed to spell a word: keystrokesinput are analyzed and the word suggested isdisplayed in the editing screen. If several words areavailable according to the keys used, you can press

or to choose from those proposed in the SmartABC/abc built-in dictionary (see example below).

�2��4�� 5 ��541. Press key 4, 6, 6, 3 in turn.The screen displays

the first word in a list: ��.2. Press to scroll and select � �.3. Press to confirm.

Press the corresponding keys to enter numbers.

��/6&��

7� & ��

1 . , - ? ! ’ @ : # $ / _ ( ) 1

2 a b c 2

3 d e f 3

4 g h i 4

5 j k l 5

6 m n o 6

7 p q r s 7

8 t u v 8

9 w x y z 9

0 space 0

#��/6&��

8��

��

9 +��

You can manage your contacts and store them onyour SIM card or in your phone’s memory (up to500 names).

#�� To search a contact in the phonebook. Enter thename that you want to search.

/��To add a new contact to the selected phonebook. 1. Select To SIM or To Phone, tap Ok or press

.2. Enter the name and number to save .

To store the number quickly you can input thenumber in idle mode, then press to save.

&��To copy all contacts from one phonebook toanother.

��You can use this function to delete contacts.

When you select From SIM or From Phone todelete, you must input the phone lock password.The initial phone lock password is 1122.

&��To group the contacts in phone book in order to beconvenient for users.1. Select a group, tap Ok or press .2. Select the corresponding option to modify.You can set the following options:

+ �� From SIM To delete all contacts from SIM.

From Phone To delete all contacts from the phone.

One By One To delete contacts one by one.

Group name To set the name of the group.

Ring type To set ring type for the call from thecontacts in the group.

Picture To set the picture displayed on thescreen when a call is coming from thecontacts in the group.

Video type To set video type for the call from thecontacts in the group.

�� #

�2��-��8��To store your own phone number in this menu. Weadvise that you enter your mobile number as well asany other relevant information.

Although all its fields can be empty, the OwnerNumbers item can not be deleted.

#��8��This number is a kind of service supplied by yournetwork provider. Please ask network provider forcorresponding function.#-#8��You can use it to set the emergency services numberin your local country or area. In most cases, you cancall this number even if you have locked the keypador setted the call barring.

The function depends on your subscription.

#��+��To set default storage for saving a new contact.

��&��To edit your vCard and select whether to send toothers.

&��To select the displayed picture during incomingcall.

&��To select the ring tone during incoming call.

&��To select the played video during incoming call.

��To display the total number of contacts stored ineach phonebook and the capability of them.

��Tap Name or press to access the contacts youhave stored in idle mode. Press the correspondingkey of the first letter of the name to search (e.g.press 9 three times to access the letter "Y"). The firstrecord starting with this letter is highlighted in thelist.Choose a contact of the phonebook, tap Option orpress to access the following options:

Member list To add or delete members of thegroup from your phone’s memory.

�( ��

In this menu, you can view the calls you havedialed, received, or missed, and call time and so on.

��To display the latest unanswered calls. Select a calllog, tap Option or press to access the followingoptions:

��To display the latest dialed calls, including attempt-ed or successful calls.

'��To display the latest received calls.

��To delete call logs, including missed, dialed,received calls or delete all.

&��To display the total time of calls made or receivedand the duration of the last call (format: hour,minute, second). You can reset the timer by settingReset All Time.

&��

The function depends on your network.

0��To show the cost of the last call made.��To show the total cost of all calls made since thecost counter was last reset. If the total cost exceedsthe maximum cost set via the Max Cost option, youwill no longer be able to make any calls until youreset the counter.

• IP Dial• View• Delete• Copy

• Send SMS• Edit• Move• Send vCard

&��

9��$ To view the detail about the selectednumber.

�� To dial the selected number.

�� To edit a SMS and send it.

��*��!-

To edit the selected number and youcan save it to phonebook.

8�� To edit the selected number.

�� To delete the selected number.

�� 7

'��To reset the cost counter.��2��To set the maximum cost for your calls. +��To set the cost of one unit; this price per unit isapplied when calculating the cost of your calls.

Before setting the options of the Reset Cost,MaxCost and Price Per Unit, you need to enter thePIN2 code.

!+'#��To count the amount of data sent and received orthe data of the last sent and received via GPRS andthe unit is Byte. You also can reset the counter.

The data of the Call Time, Call Cost, SMSCounter and GPRS Couter is only for refer-ence. Please follow the actual bill previded by youroperator or retailer and ask your operator for moreinformation.

You can send text messages by using the ShortMessaging Service(SMS) and manage the messagesyou sent and received.

$��To compose and send a SMS, follow the stepsdetailed below:1. Select Write Message, enter your text and tap

Option or press to access the next options:

Select Send Only/Save and Send, tap Ok or press to enter a number, or tap Search or press

to select a contact from your phonebook.

When you send message via SMS network, yourphone possibly shows "Sent". It shows that the

#�#

��/�� To send the message immediately.

��*�� To save a copy of the message tooutbox and send the message.

��*� To save the message to outbox.

��2�� To send message to many contacts.

��5��'To send message to all of theselected group.

��/!<� � To add picture, animation or soundto the message.

4� ��2�3� To set the 2�3�� =�>� 2�3�� ,�� and�6�$��'�.

�, ��

message has been sent to SMS center, which youhave set in SIM card, but it does not show that themessage has been sent to destination.

"��2You can read SMS messages received in this menu.The messages are displayed in a list. When a message is displayed on the screen, tapRead or press to read it, then tap Option orpress to access the following options:

-��2The message won’t be stored in outbox until youselect Save or Send and Save after editing themessage.Select a saved message, tap Ok or press to readit, tap Option or press to access the followingoptions:

�� To delete the selected message.

)�'�� To reply to the sender.

4�$�� To edit and forward the selectedmessage.

8�� To edit the selected message.

�'��%��

To copy the selected message toanother memorizer .

�*��%��

To move the selected message toanother memorizer.

Chat To chat with the sender.

��All To delete all messages at once.

Copy All To copy all messages to anothermemorizer.

�*��ll To move all messages to anothermemorizer.

"�� !��

To save or dial the number of thesender and the number in themessage.

"��") To link to the web address in themessage.

��*��/!<� �� To save multimedia items such aspictures in the message.

�� To send the message immediately.

Delete To delete the selected message.

Edit To edit the selected message.

�� .

It won’t display "Copy to SIM" and "Move toSIM" until the message is stored on SIM card, orvice versa.

��In this menu, the phone predefine up to tenmessages that you use frequently when writing anew message.

Select a message, tap Ok or press to access thefollowing options:

��To display the storage status of the messages savedin SIM card and phone.

#�#��To display the amount of SMS sent and received.

��You can modify the SMS settings in the menu. Itssubmenus include:+��

�'��%��

To copy the selected message, thenstore in other memorizer.

�*��%��

To move the selected message andstore in other memorizer.

Delete All To delete all messages in outbox.

Copy All To copy all messages to anothermemorizer .

�*��ll To move all messages to anothermemorizer .

"�� !�� To save or dial the number of thesender and the number in themessage.

"��") To link to the web address in themessage.

8�� To edit the selected message.

8�� To delete the selected message.

��

To use the selected template to write anew message.

��&��6� �

To edit the name of the profile.

��

To select your default SMS centre. If itisn’t predefined on your SIM card, youmust enter your SMS centre number.

�1 ��

&��

+��This menu is used to select preferred storage to savethe received messages.+��6��This menu is used to set the preferred transmissionmode. For further detail, please contact with yournetwork provider.

The mobile phone also can send and receive MMS(Multimedia Messaging Service) messages. Youcan send messages that contain pictures, sound filesand text.When sending MMS messages, your recipient mustalso have an MMS-enabled phone in order to beable to view your message.

$��To compose and send a MMS message, follow thesteps detailed below:1. Select Write Message, enter the following

message.

9��

To select the length of time for yourmessages being stored in the SMScentre. It is very useful when therecipient is not connected to thenetwork( and thus cannot receive yourmessage immedia-tely). This featuredepends on your subscription.

��2�'�

To select the type for sending message.This option depends on your network.

��*��)�'��

When you activate the function, thephone will inform you via SMS whetheryour own SMS was received or not.This feature depends on your subscri-ption.

)�'��When On, this option can transmit thenumber of your SMS message centretogether with the message. The reci-pient can reply to you by using yourown SMS centre instead of theirs. Thisspeeds up the rate of transmission. Thisfeature depends on your subscription.

��#

2 To set number or E-mail of therecipient.

� To set number or E-mail of the recipientto be sent the message at the same time.

��

2. Tap Done or press to finish editing andaccess to the following options:

"��2In this menu, you can read MMS messagesreceived. Select a message, tap Option or press to accessthe following options.

-��2This menu is used to save all messages by selectingSave and Send.Select a message, tap Option or press to accessthe following options:

5 To set number or E-mail of the recipientto be sent the message in secret.

��!<� � To set the subject of the message.

8��

To edit the content of the message. Youcan add text, image, sound andattachment.

��/�� To send the message.

��*�� To save the message to outbox assend the message.

��*��&�� To save the message to drafts.

��/'�� To set the sending options.

83�� To exit from editing mode.

9��$ To view the message, you can tapOption or press to access optionmenu and can select Play/Save imageAs/Save audio As to play or save themultimedia items.

��'��To view the sender, subject, date andsize.

)�'�� To reply to the sender.

)�'��

To reply to all senders including To,and Cc columns.

4�$�� To edit and forward the selectedmessage.

Delete To delete the selected message.

��All To delete all messages in inbox.

"��6 �!��

To save or dial the number of thesender and the number in the message.

9��$ To view the message.

��

��This menu is used to save all messages by selectingSave to Drafts. Select a message, tap Option or press to accessits options as the outbox’s options.

If you have not set the recipient for the message indrafts,the #�� option will not display in optionmenu.

��In this menu, the phone predefine five samples thatyou use frequently in a new message. Select a message, tap Option or press to accessthe following options:

��To display the storage status of MMS.

��In this menu, you can modify the MMS confi-guration. Its submenus include:&��To set Creation Mode, select Image Resizing andwhether to activate signature automatically or not.#��To set Validity period, Delivery report, Read report,Priority, Slide Timing and Delivery time options forsending a MMS.'��To set Home network, Roaming, Read Report andDelivery Report options for receiving a MMS.3��To set Anonymous, Max Size and Advertisementoptions.

��'�� To view the recipient, subject, dateand size.

��/��%)��

To send the message to others. If themessage has not been sent successly,it will show Resent.

�� To delete the message.

�� To delete all messages in outbox.

"��6� !�� To save or dial the number of the se-nder and the number in the message.

9��$ To view the content of the message.

��'��To view sender, Cc, subject and size.

��

To take the selected template as a newmessage.

��

��+��To set the network configuration. You can contactwith network provider for details.

You can send or receive email messages byconnecting directly to an email server through aninternet service provider(ISP) or a network.

The function depends on your subscription andnetwork.

#��To send and receive email messages.

Please set the email configuration before sendingand receiving from your email server provider.

$��To composet and send an email, follow the stepsdetailed below:1. Select Write Email, enter the following

message.

2. Tap Done or press to finish editing andaccess to the following options:

"��2You can read received email messages in the menu.

��

2 To set the receiver address.

� To set the receiver address to be sent theemail at the same time.

��!<� � To set the subject of the email.

��

To attach files, such as pictures and soon.

�� To select the sending priority.

�� To edit the content of the email.

��/�� To send the email.

��*� To save the email to the Sentfolder as send the message.

��*��&�� To save the email to drafts.

?��$��*��

To quit the edit interface withoutsaving.

)�'�� To reply to the sender with theoriginal text.

)�'��$��

To reply to the sender without theoriginal text.

��

%��You can read unsent or failing sent email in themenu.

The network of your mailbox may not supportsending email from the phone, then it possibly willshows that sending email failed.

#��The email messages won’t be stored in the menuuntil you select Sand and Save after editing.

��The email messages won’t be stored in the menuuntil you select Save to Drafts after editing.

��To delete all email messages.

��In this menu, you can modify the email confi-guration.1. Select a profile, tap Option or press to

confirm.2. Select Edit, tap Ok or press to set the

following configuration.3. After finish setting, select Activate, tap Ok or

press to activate.

+��#��

)�'�� To reply to all contacts in the emailwith original text.

)�'��$��

To reply to all contacts in the emailwithout the original text.

4�$�� To edit and forward the selectedemail.

�� To delete the selected email.

��&��6� �

To set the profile name.

��

To select your data account.

Please select "GPRS", then selectyour local network.

�� To define your email protocol advisedby your email server provider.

�� -��*��

To select the interval of receivingemail automatically.

�� #

-��

"��

#��

This menu helps you manage all kinds of things inyour work or life. You can set the content, detailedtime and alarm of the menu.If there is no task in your phone, it is empty. Youcan tap Add or press to create a new task, thentap Done or press to finish.If you select a task, you can tap Option or press to access the option menu.

�$��=�

To set the most download capability.

/�� *��

To set server’s IP address or compu-ter’s name of sending email.

/��

To set the port of sending email.

��'��6� �

To set your username.

8+��

To input your Email address.

"�� To input your name.

��$�� To input your password.

�� *��

To set server’s IP address or comput-er’s name of receiving email.

��

To set the port of receiving email.

"�� To input your name.

��$�� To input your password.

��*��'�To set whether to copy on the emailserver.

��

To select whether to activate AutoSignature.

��

To set an image for signature.

��2�3�

To input the signature text.

��

�( ��

&��

� ��

This function is used to chat with your contact bySMS.1. Select a chat room, then tap Ok or press .2. Select Chat Room Info, enter my nickname

and destination number, then tap Ok or press.

3. Select Start New, enter the message and send itto start chatting.

This menu is used to set mail server number andlisten to voice mail. Firstly, please enter one of the voice mail servernumbers supplied by your network service provider.When you receive a voice mail, your provider willsend a message to your phone.Select an item, tap Option or press to access thefollowing options:

�� To enter the date of the task.

2� � To enter the time of the task.

The time format you enter must be 24-hour system.

6�� To enter the content of the task.

�� To set the status of alarm.

)�'��To set frequency: Once, Every Day, Day,Weekly, Monthly.

9��$ To view the settings of the selectedtask.

�� To add a new task.

8��2��- To edit the selected task.

��2��- To delete the selected task.

�� To delete all tasks in To Do List.

��*��

To sent the task by SMS orBluetooth.

& ��

:��

8�� To edit voice mail server number.

�� 9� �To listen to voice mail.

�� 7

In idle mode, press and hold 1 key to access voicemail server directly.

The function depends on your subscription.

This is a kind of public messages broadcasted to agroup of mobile users. Generally speaking, eachbroadcast channel can transmit a sort of message.Please contact with your network provider to get thechannel and information list.

'��This menu is used to set the function of broadcastmessage. When activating this mode(On), you canreceive the broadcast message. Otherwise, you cannot receive messages.

'��To read broadcast messages after activating receivemode.

0��To set the language of the message that can bereceived.

& ��Tap or press to set channel, you can selectSelect, Add, Edit or Delete.

6��

�, ��

; ��

You can use this player to view the videos yourecord or prestored in your phone.1. Select a video file, tap Option or press to

access the following options:

2. Tap Play or press to access the playinginterface.

The following table lists the operations of thevarious icons and keys in playing video:

You can use this player to play music. The musicstored in the player folder can be automaticallydetected and added to the play list. You can dial or

:��

�� To play the video.

4�$�� To apply the video to other options.

)�� To rename the video.

�� To delete the video.

��4��

To delete all videos.

�� To sort all videos separately by name,type, time or size.

�� To select storage to save the picture.

To play the selected video.

To pause.

To play by the full screen.

To cut the current picture of playing andsave into the imageviewer.

To adjust the playing speed.

It is only voiced by 1 playing speed.

To adjust the playing volume.

To recede quickly.

To march quickly.

To play/pause.

To stop/back.

To cut and save the current picture ofplaying.

/��

�� .

answer a call during listening to the music and theplayer will be paused automatically while you aretalking.

/��1. You must power off the phone, if you want to

copy music files into the memory of the phone.But it is needless, if you just copy them to thememory card.

2. Connect the phone with PC via the USB cable,after PC identifies it, you can copy the filefrom PC to the memory or delete the file in it.

In order to play all files successfully, please storethem in the "My Music" folder of the memorys.

If you want to play the music with its lyric, pleasedownload the LRC format file, save it with thesame name of the music and save them in the samememory.

/��/��+��In idle mode, tap , press , press or selectAudio Player in the multimedia menu can access theandio player.Using for the first time, it maybe show nothing,please operate as follow:1. Tap List or press .

2. Tap Option or press to change the defaultsetting.

3. Select the memory music files have stored andothers in Settings menu.

4. After finish setting, select Refresh List toupdate the list.

+��/��+��Select a music file, tap Option or press toaccess the following options:�� To play the music.

�� To display the info of the music.

��2�)��To set the music as ring tone.

)�&�� To refresh the play list.

�� Include the source of the music, ListAuto Gen, Skin, Repeat (Musicrepeat mode in playing), Shuffle(Playing order), Background Play(Whether to continue playing whenyou exit from audio player), AudioEqualizer, Spectrum Display Styleand Lyrics Display.

�1 ��

The following table lists the operations of thevarious keys in playing music, you can tap thecorresponding icons, too.

This menu is used to record a video as the MP4format.

/�� :��'��Select Video Recorder, tap Ok or press toactivate it.The following table lists the operations of thevarious icons or keys in video recording mode.

� ��Tap Option or press to access the followingoptions in video recorder.

To play/pause.

To adjust the playing volume.

To skip to the previous/next music.

To return to the idle mode.

To access the playing list.

To return to previous screen.

To play the selcected music from thebegining.

:��

To start recording.

To pause/continue recording.

To start/pause recording.

or To increase / decrease exposurecompe-nsation.

or To zoom in / out.

To stop recording.

2�� To access Video Player.

��

To set White Balance, EV, NightMode, Frequency.

9�� To set Video Quality,File SizeLimit, Rec Time Limit, RecordAudio, Encode Format.

8&&� �� To set special effect for the video.

�� To select storage to save the video.

)��&��To reset the recorder settings totheir default values.

��

Your phone is provided with a built-in digitalcamera. You can take pictures, store them in yourphone or transfer them to your PC via cable line, usethem as wallpaper or send them to your friends viaMMS.

/�� Press and hold or tap in idle mode or selectCamera and press to activate the camera. When the camera is activated, the preview screen isdisplayed.The following table lists the operations of thevarious keys in camera mode, you also can tap thecorresponding icons on the subjacent screen to settheir parameters.

��1. Frame your picture and press to take the

picture.2. While the picture is taken, a view screen is

displayed. Then press to save the picture,press to ignore the picture or tap tosend the picture as a MMS and enter intoediting MMS mode.

-��&��This section describes in detail the option menu incamera mode.

&��

To increase / decrease exposure compe-nsation

or To take a picture

To exit the camera mode and return to theidle mode

To access the Option menu

To return to previous screen

1 To select Effect Setting

2 To set White Balance

3 To set Delay Timer

4 To activate / deactivate Cont Shot

5 To set Scene Mode

6 To set Image Quality

7 To set Image Size

2�� 9��$��To access ImageViewer.

��

This function is used to record sound and displaysound files you have recorded. You can play,rename or delete them.If having no clips, tap Optionor press to select Recording to record.Select a record clip then press to access thefollowing options:

This function is used to edit melody you like and setit as ring tone.If there is no melody, tap Add or press to createa new melody.� ��

�� To set Shutter Sound, Exposure,Banding, Delay Time, Cont Shot.

� �� To set Image Size and ImageQuality.

��5�� To select White Balance.

� �� To set scene mode of screening

8&&� �� Set special effect for the picture.

��4�� To add a frame to the picture.Some frames are usable only tosome special size.

�� To select storage to save thepicture.

)��&��To reset the camera settings totheir default values.

#��

)� �� To record a new lip.

�� To play the clip.

�''�� To append sound to the clip.

)�� To rename the clip.

�� To delete the clip.

�� To delete all clips.

�� To set the format of the clip.

4�$�� To apply the memo to other options.

��

0 To insert a rest.

1-7 To enter Do-Si.

8 To insert vibra effect.

8+ To deactivate the vibra effect.

��

��In order to enrich your melody, you may need to adda vibra note.1. Add a vibra note: Press 8 to add it.2. Deactivate it: Enter one or more notes after the

vibra note, then press 8 and to deactivate it. -��

-��

When you take a picture and save it, the file is storedin this folder. You can use the navigation keys toview them .Select a photo, tap Option or press to access thefollowing options:

To change pitch of the note to high,middle or low.

To switch the status of the note to high,normal or low.

To change the tempo.

�� To play the melody.

��'�� To select playing speed of themelody.

�� To select a musical instrument.

��*� To save the melody.

�� To play the melody.

8�� To edit the melody.

�� To create a new melody.

)�� To rename the melody.

�� To delete the melody.

��4�� To delete all melodies.

4�$�� To apply the melody to others.

"��

9��$ To view the picture of full screen.

� ��& To view the details of the picture.

5�$�� To set Browse Style as List Modeor Matrix Mode.

4�$�� To apply the picture to otheroptions.

)�� To rename the picture.

�� To delete the picture.

��4��To delete all pictures.

��

Tap icons to flip to view them or revolve duringfull-screen viewing.

+ ��You can edit your photoes or the prestored pictures.Select one photo from one memory, tap Option orpress to access the following options:

"��This option is used to piece two, four or nine picturetogether.

#�� You can use it to view photoes or picturescontinuously as slide show.Select a foler, storing some photoes,tap Ok or press

to access the following options:

This menu is used to manage the image, soundrecorder, ring tone and music in your phone.

�� To sort all pictures separately byname, type, time or size.

�� To select a storage for the picture.

+ ��

��*�� To save the edited as a new one.

��8&&� �To add special effect, such as Grays-cale, Sepia and so on.

��4��

To add special frame.

�� To add some special icons.

��2�3�To add some words on it.

��<��

To adjust Brightness, Contrast,Saturation, Hue and colors.

4��' To flip it.

83'��*��

To expand it to full screen.

)�� To resume to play.

The menu isn’t displayed until press , or while playing.

�� To play automatically.

�� To set Type of Play, Speed, Effect,BGM, Horizontal View, Sound Effect.

3��

�� #

The top of the screen in this menu will show theoccupation info of the storage. If you select a filein file manager, the screen will shows you date andsize info about it at the same corner, but if select afolder, it will show date only.

Tap a memory or a folder can open it directly.

�� Enter the File Manager menu and select D:, press

to enter the following options:

��After inserting the memory card, this menu will bedisplayed.Select Memory Card and press to operate theoptions as operating D:.Select Remove and press

can remove the memory card and the MemoryCard menu won’t be displayed from now on.

You need to access the Video Player,AudioPlayer and Image Viewer before the folders willbe created automatically in the phone/micro-SDcard memory when you plug in the USB cable.

To set the audio equalizer to change the audioeffect.

/'�� To open the folder. You can select a file orfolder to do the following operation.• Operations to filePlay(for music file), View(for image file),Forward, Detail, Rename, Copy, Move,Delete, Delete All Files and Sort.• Operations to folderOpen, Create Folder, Rename, Delete andSort.

��4��

Create a new folder in the file folder.

4� ��To format the folder.(Valid for rootdirectory only).

#��

�( 2��

< ��

This menu is used to set five alarm clocks, theoperation is as below: 1. Select one alarm and access its edit interface. 2. Set the status (Off/On) , time and alarm

type(Once/Everyday/Days), snooze intervaland alert type(Vibra and Ring/Ring/VibrationOnly), then tap Done to press to completesetting.

After select Days, press or tap the next row toset status of each day in a week.

The alarm clock will ring even if you turned offyour phone.

While the alarm is ringing, tap Stop or press tostop; tap Snooze or press to stop temporarilyand it will ring after snooze time you set.

You can view the calendar, access or edit To DoList. Select the date to view and tap Option or press

to access the following options.

Your phone has a built-in calculator that you canuse to perform basic calculations. Tap the analog keypad or press the numeric keypadto finish calculating.The following table lists the operations of thevarious keys in calculation mode.

Only 12 digits(including decimal point) can besaved for the results and operands.

/��

&��

9��$�2��-�

To set date, time, note and alarm ofthe schedule. Tap Add or press to add a new task; edit or view theselected task (Please refer to To DoList for details ).

@� '�2��To view the appointed date quicklyyou enter.

&��

or Ok Operation result

or Clear Clear number

Decimal point

2�� 7

This menu is used to check the time of main citiesaround the world.Tap , on the both sides of the city or press , to select a city, the local date and time will show onthe bottom of the screen.The date and time arecorresponding with your current date and time ofthe phone.

This function is used to convert a sum from onecurrency into another using the exchange rate ofyour choice. You can convert from Local to Foreignor vice versa. 1. Enter a rate in the Rate field, tap Ok or press

.2. Select Rate Representation(The first line on

the screen).3. Enter an amount in the Local fields, tap Ok or

press to get the conversion value.

Rate Representation option allows you to select theRate you enter is the ratio of Local to Foreign orForeign to Local.

The result is only for your referrence.

You can use conversion function of length andweight units.

You can enter decimal point by pressing # Key,when processing units or currency of conversion.

You can read the TXT files by this reader.

All reading must be stored in the "Ebook" folderof the memorys.

1. It may display "Empty Folder" while you accessit for the first time. Tap Option or press toaccess the following options:

2. Select a file, Tap Option or press to accessthe following options:

$��

&��

%��

�(��

��"'5-��&

To update the files of the Ebookfolder.

��!��To set Font Style, Font Size, ScrollBy, Auto Scroll, Srool Speed, FullScreen, Encoding, Select Memory.

�, 2��

There are two kinds of stopwatches to clock for you.

�� To select Split Timing, Lap Timing to clock(Up to20 items) or select View Record to view the savedrecords.

�$�� Tap the arrowhead icon or press the navigation keyto start the corresponding stopwatch

Press and hold to reset the nWay stopwatch.

This menu supplies you with the reference of bodymass index and female menstrual.

6�"Select Sex and enter the height and weight, then tapOk or press to get the result.

��The operation method is the same as "BMI".

The calculated data is for reference only, and theactual data may be different.

Your phone has a built-in E-dictionary that you canconsult translation for English word or chinese.

/'��8+5-To view the selected file.

��"'5-��&

To update the files of the Ebookfolder.

��!��

To view or modify the defaultsettings.

5-��& To view the details of the file.

�� To delete the selected file.

�� 4��

To delete all files in the Ebookfolder.

��To sort all files separately by name,type, time or size.

�''�� !��

To apply the global settingd for allfiles.

0��'To view the shortcuts of some keysduring reading.

#��

��

�(��

2�� .

1. In the find interface, switch an input method whatyou need by tap its icon or press .2. Enter word or chinese, select word or chinese youwant to consult from the list.3. Tap Option or press to access the followingoptions:

��$��To show translation of your input.

�� To search some similar words orchineses according to your input.

��'�� To switch the input method.

�1 ��

= #��

You can use this menu to customise your phonesettings and change their default values (time anddate, security, etc.).

��To set home city, time/date and format.

#� ��To set the time to power on or off automatically. Select an item, tap it or tap Edit or press toaccess the following options.

0��To select the default language for all menu texts.

+�� To select the default input method for editing letter.

��To select the default encoding type for playingmusic and reading E-book rightly.

/��

To select whether to lock your keypad automatically inidle mode and to select the interval of locking from thelist.

#��You can set eight speed dial numbers at most. Pressand hold the corresponding number key or tap andhold the corresponding number icon to dial.

��In this menu, you can modify the predefinedfunction menu of the navigation key according toyour demands.The default setting is as below:

+ ��

��0 ��To select your local city.

��2� �%�� To adjust the current time and date.

��4� �� To select their format.

�� To select Enable(the setting is valid)or Disable(the setting is invalid).

�$��/�%/&&To select Power On or Power Off.

2� � To input the time.

8��!��'��To enable or disable the function.

��6� !�� To set the speed dial number.

��

In idle mode, you can quickly access the set functi-ons by pressing the navigation keys.

/��To update the time in your phone.


3�� To select the mode of the phone according to yourenvironment.

In idle mode,tap on the top left corner of thescreen to change the current mode fleetly.

��To set the validation speed after writing and selectthe show color of the handwriting.

# ��In this menu, you can modify the ten predefineditems according to your demand .If you select that press one navigation key to accessShortcuts, you will press the corresponding key toaccess its predefined function menu in idle mode.Select an item, tap it or tap Option or press toaccess the following options:

Audio Player

Alarm

User Profiles

Tone Setup

6� �� To hold all functions of the phone.

4�� To deactivate all communicationfunction and hold entertainmentfunction.

?��$��/�

To query which mode to be usedwhile powering on.

�� To add a new menu.

8�� To select a menu to replace the old.

�� To delete the selected one.

�� To delete all of the predefined menu.

��!��%8��!��

To disable or enable the selected one.

��/��

To set the order for the selected one.

��

$��To set the background image of main screen disp-layed in idle mode.

#��To set the image displayed after being in idle modefor a stated time.

+��To set the image displayed when power on.

+��

To set the image displayed when power off.

0&�� To set the backlight of the display screen, and selectthe length of time that the backlight stays on afterlast activing the keypad.

� ��To set the theme of the screen color. There are threekinds of themes for you to select.Select one of them, then tap it, tap Option or press

to access the following options:

No matter which options you set in UpdatePeriod or Set Order, you must select Activateafter setting.

# ��To set whether to display the date and time in idlemode.

��

�� To view and select the predefined image.

"��&��

To view and select the downloadedimage.

�� To set Status(On/Off) and Waiting(set thetime for the appearance of the screen saverimage).

�� To select the image for screen saver.

�� To view and select the predefined image.

"��&��

To view and select the downloadedimage.

� ��*�� To activate the selected theme.

"'�� To set frequency of color updating.

��/�� To set order of color updating.

��

# ��To set whether to display the owner number in idlemode.

# ��To set whether to display the operator name in idlemode.

&��To select the display clock type in idle mode,including analog clock and digital clock.

In idle mode, to tap the clock is to access SetTime/Date, Alarm, Clock Type.

# ��To set whether to display the detailed prompt of thereceived or missed info.

!��2�To set individualized greeting text displayed whenpower on.

You can activate the corresponding user profileaccording to your environment and set someoptions of the selected mode, too. 1. Select General/ Meeting/ outdoor/ Indoor/

Headset/ Bluetooth, then select Activate inoption menu. Thus the mode you select is inoperation.

2. Select Customize in option menu to set thefollowing options.

�� To activate or deactivate the display ofgreeting text.

2�3� To edit the content of the greeting text.

%��

2��' Includes Incoming Call, Alarm, PowerOn, Power Off, Message Tone,Keypad Tone.

9�� Allows you to set the volume of RingTone and Key Tone to one of the sevenlevels.

��2�'� Includes Ring, Vibration Only, Vibraand Ring, Vibra Then Ring.

)��2�'� Includes Single, Repeat, Ascend-ing.

83��2�� Includes suggestive sounds asWarning, Error, Camp on and Con-nect.

��

The Headset mode needs not to be activated. Aslong as you plug in the earphone, your phone willswitch to the headset mode automatically.

&��"�To select whether to tell the correspondent your iden-tity while dialing.

&��This is a kind of network service.It means that ifanother person is trying to reach you during calling,the phone will remind you.

&��To divert incoming calls to your voice mailbox or toanother number (whether in your phonebook ornot).

You also can select Deactivate to cancel a diverting,select Query Status�to check the status.�

��$��

Whether to set Any Key to answer.

The "Auto" option in Answer Modeshows only in Headset Mode.

&��

��5��6��$�- The default setting of the system.

0�� To hide your number.

�� To send your number.

� ��*�� To activate the function.

�� *�� To deactivate the function.And thephone won’t remind you and anotherpenson who is dialing will hear thebusy tone or the call will be diverted toanother phone (If your phone is set to��*��&�5��).

?��

To query the current status of it.

��*��9� ��Will divert all voice calls.

��*��&�"�� !��*��&�6��$��*��&�5��

To choose in which circums-tance you want to divert theincoming calls.

��*�� To divert all data calls.

�� *�� To cancel all diverting op-tions.

�� #

&��

You can restrict outgoing and incoming calls fromyour phone. This function is network dependent andneed a specific password which is supplied by yourservice provider.

You can select Deactivate to cancel a diverting,select Query Status to check the status.0�� You can switch line via this menu, if your SIMcards can be used with two subscribers’ numbers(network service). This function is available only ifyour SIM card supports it.

All functions of this section listed above depend onyour subscription and network.

&��To select whether to activate Call Time Reminderand set the periodic beeping time.

&��To set whether to display the call time duringcalling.

/��If you activate this function and the call you dial isnot answered, your phone will automatically redialthis number at intervals until reaching the largestredialing times (10 times) or the call is answered.Please press or to end redialing .If you deactivate it and the call you dial is notanswered, your phone will antomatically hang up.

/��

To select All Calls, International Callsor International Except Home.

�� To select All Calls or When Roaming.

�� To remove all barring options.

��5��

To change the barring code.

/&& To deactivate this function.

�� To set from 1 to 3000 (seconds) as thebeeping time.

�� To set from 30 to 60 (seconds) as periodicbeeping time. The phone will beep ,whenin this time each minute.

�( ��

&��To restrict your correspondent.If the function isactive, you can contact nobody but the users in thegroup.To contact your network provider for details.


"+��To set IP number in order to make IP calls. Thisfunction depends on your subscription and network.Contact your operator for configuration parameters.


6��To set your black list in order to reject the incomingcalls in the list.

8��To select your service network.It is an advice thatselecting Automatic.

You can select a network other than your homenetwork only if it has a valid roaming agreementwith your home network. If you change thenetwork, some problems maybe arise during theoperation of your phone.

+��You can use this menu to build a network list ofpreference. Once defined, the phone will try to regi-ster on the network, according to your preferences.Select an item, tap it or tap Option or press toaccess the following options:

�� To set this option On or Off.

5�� -��6� !�� Set the numbers to be refused.

8��

�� Your phone will automatically selectand register a usable network.

�� Your phone will automatically providesa list of the networks available in thearea. Select one of them to register.

��4� �� To add a preferred network fromthe list.

��6�$ To create a preferred network.

��To set the priority for the selected.

�� To delete the selected one from thelist

�� 7

!+'#��To select the connection mode, including Alwaysand When Needed.

#"��When the SIM Lock is activated, you must enter thePIN code( the PIN code is supplied by the providerwith the SIM card) every time the phone is poweredon. If you enter an incorrect code for three times,you need to enter PUK code (PIN unlocking code).The PUK code is used to unlock or change thelocked PIN code. If the PUK code is not offered orlost, you can contact the network provider.

+ ��

Once you set the status On, you must enter thepassword each time when the phone is powered on.The default is 1122.

3�2��To restrict outgoing calls to designated phone num-bers. PIN2 code, supplied by the network provider,is required to activate this function.

Not all SIM cards have PIN2. If your SIM card donot have PIN2, this menu is unusable.

6��To restrict the outgoing calls you set in this menu.

The function depends on your network.

& ��This menu is used to change PIN/PIN2 code and thephone lock password.��6��

PIN Code(Personal Identification Number) is used toprevent SIM card from unauthorized use. The PIN issupplied with the SIM card. The service providersupplies the default value.If you enter an incorrect PIN code for three times, thePIN code of SIM will be locked and you have to enterthe PUK Code to unlock it.The PUK code is supplied with SIM card. If it is notsupplied, you can get the code from the serviceprovider.If you cannot enter a correct PUK code within ten tries,the SIM card will be locked forever.��6��

It is used to access some special network functionssuch as charging or fixed dial,etc. The service providersupplies the default value. If you cannot enter a correct

#��

�, ��

PIN2 code within three tries, the SIM card will belocked and you have to enter the PUK2 code.The service provider supplies the PUK2 code.If you cannot enter a correct PUK2 code within tentries, the functions in connection with PIN2 codecannot be used anymore. �� -��$��

Phone Lock Password protects your phone againstunauthorized use by other people. The password isnecessary when you delete all data or restore factorysettings. The initial phone lock password is 1122.

In this menu, you can calibrate to enhance veracitythat the stylus taps the touch screen. Whilecalibrating, tap the center of these icons accordingto the prompt on the screen.

Changing temperature or bearing the phone mayreduce its veracity.

This menu is used to reset your phone to its factoryconfiguration.Enter the phone lock password, then press toconfirm.

+��

'��

83�� .

> �2��

You can modify the settings of the bluetooth, theWAP and so on.

Your phone supports the bluetooth commnication.It is a short-range wireless communication, thedevices with bluetooth capabilities can exchangedata, H-Free talk or telecontrol.

The communication distance is about 10 metresand it maybe shorten with some physical barsbetween them.

+��To select whether to activate or deactivate thefunction.

You can’t set the following menus of this partuntil you have activate it.

"�?��To search the bluetooth equipment you want toconnect.

��To search the bluetooth equipment as more aspossibly.

/��To show the bluetooth equipment connecting yoursnow.

#��To set your pensonal or others info.

/��To show the correlative info of the bluetoothfunction, for example, device name,BD adress etc.

6��

9��!�� To set whether to be searched byothers.

��*� ��6� �

To set its displayed name onothers.

�� To set whether to authenticate it.

�� To select the audio path.

42�� To set the shared folder and theaccess right.

#1 83��

You can use WAP to browse the WAP sites on yourphone.Before using it for the first time, you must set theWAP configuration.

If your network operators modify the WAP settingsor the network providers of the content modity theWAP address, it will result in you can’t view theWeb, please ask them for the latest information.

To set the detailed info of the GSM/GPRS dateaccount.

If the SIM card you insert has the STK function, theSTK menu will display. Select correspondingservice option and press to access the function.

The function items of this menu depend on yoursubscription or operators. Please ask your opera-tors for specific.

The phone provide some games for you.Select one game, then press to access to thefollowing options:

#��This menu is used to turn on or turn off the audioand vibration effect of the game.

$/+

��

#�7

!��

)�� Continue to play the last game.

The menu isn’t displayed until press , or while playing.

�� Enter the game mode and start game.

5�� Minute your best score.

�� 0��' Detailed rules for playing this game.

� ��;�� !�� #�

"��@��In idle mode, several symbols can be displayedsimultaneously on the screen.

If the network symbol isn’t displayed, the networkis not currently available. You may be in a badreception area, moving to a different location mayhelp.

�� - The more bars are shown thebetter the reception is.

5�� - The more bars you see, themore power you have left.

9�!�� - Your phone will vibrate when receivinga call.

)�� - The alert type is ring.

9�!�� - The alert type is vibra and ring.

9�!�� - The alert type is vibra thenring.

0��- The alert type is vibra then ring.

�� - The current line.

�� - You have a missed call.

�� - You have received a new message.

�� - You have received a new MMSmessage.

9� �� - You have received a new voicemail.

��) � is in chatting state.

��)�� - Your phone is connected tothe GPRS network.

�� activated.

:��'�� - activated.

:��'��"�� - activated.

��&�$�� - The phone is in calls-forwardstate.

�� - The current line.

#� ��

+��

Your cellular mobile phone is a low power radiotransmitter and receiver. When it is operating, itsends and receives radio waves. The radio wavescarry your voice or data signal to a base station thatis connected to the telephone network. The networkcontrols the power at which the phone transmits.• The GSM network controls transmission

power (0.01 to 2 watts).• Your phone complies with all relevant safety

standards.Your cellular mobile phone is your responsibility.To avoid damaging yourself, to others or to thephone itself, read and follow all the safetyinstructions and make them known to anyoneborrowing your phone. Furthermore to preventunauthorised use of your phone:Keep your phone in a safe place and keep it out ofsmall children's reach.Avoid writing down your PIN code. Try toremember it instead. Switch off the phone and remove the battery if youare going to leave it unused for a long time.

The design of your phone complies with allapplicable laws and regulations. However yourphone may cause interference with other electronicdevices. Consequently you should follow all localrecommendations and regulations when usingyour cellular phone both at home and when away.Regulations on the use of cellular phones invehicles and aircraft are particularly stringent.Public concern has been focused for some time onthe possible health risks for users of cellular phones.The current research on radio wave technology,including the GSM technology, has been reviewedand safety standards have been drawn up to ensureprotection from exposure to radio wave energy.Your cellular telephone complies with allapplicable safety standards and the RadioEquipment and Telecommunications TerminalEquipment Directive 1999/5/EC.

Inadequately protected or sensitive electronicequipment may be affected by radio energy. Thisinterference can lead to accidents.Before boarding an aircraft and/or when packingthe phone in your luggage: the use of mobile phonesin an aircraft may be dangerous for the operation of

'��

/��

�� #�

the aircraft, disrupt the mobile phones network andmay be illegal.

In hospitals, clinics, other health care centres andanywhere else where you may be in the closevicinity of medical equipment.

In areas with a potentially explosive atmosphere(e.g. petrol stations and also areas where the aircontains dust particles, such as metal powders).In a vehicle transporting flammable products (evenif the vehicle is parked) or a vehicle powered byliquefied petroleum gas (LPG), check first that thevehicle complies with the applicable safety rules.In areas where you are requested to turn off radiotransmitting devices, such as quarries or other areaswhere blasting operations are in progress.Check with the vehicle manufacturer thatelectronic equipment used in your vehicle will notbe affected by radio energy.

If you are a user of a pacemaker:• Always keep the phone more than 15 cm from

your pacemaker when the phone is switchedon, in order to avoid potential interference.

• Do not carry the phone in a breastpocket.

• Use the ear opposite to the pacemaker tominimise the potential interference.

• Switch off your phone if you suspect thatinterference is taking place.

If you are a user of a hearing aid, consult yourphysician and hearing aid manufacturer to learnwhether your particular device is susceptible tocellular phone interference.

In order to improve the performance of yourphone, reduce radio energy emission, reducebattery consumption and ensure safe operationadhere to the following guidelines:For the optimal and satisfactory operation of thephone you are recommended to use the phone in thenormal operating position.• Do not expose your phone to extreme

temperatures.• Treat the phone with care. Any misuse will

void the International Guarantee.• Do not immerse the phone in any liquid; if

your phone is damp, switch it off, remove the

%��

%��

+��

��

battery and let them dry for 24hrs before usingthem again.

• To clean the phone, wipe it with a soft cloth.• Placing and receiving calls consumes the same

amount of battery energy. However, the mobileconsumes less energy in idle screen when keptin the same place. When in idle screen andwhile you are moving, your phone consumesenergy to transmit updated locationinformation to the network. Setting thebacklight for a shorter period of time as well asavoiding unnecessary navigating in the menuswill also help to save the battery’s energy forlonger phoning and stand-by performances.

• Your phone is powered by a rechargeablebattery.

• Use specified charger only.• Do not incinerate.• Do not deform or open the battery.• Do not allow metal objects (such as keys in

your pocket) to short circuit the batterycontacts.

• Avoid exposure to excessive heat (>60°C or140°F), moisture or caustic environments.

You should only use Philips authentic battery andaccessories, as the use of any other accessories maydamage your phone and may be dangerous, and willmake all guarantees for your Philips phone null andvoid. The use of an incorrect type of battery mayalso cause an explosion.Make sure damaged parts are replaced immediatelyby a qualified technician and that they are replacedwith genuine Philips replacement parts.

It lowers concentration, which can be dangerous.Adhere to the following guidelines: Give your fullattention to driving. Pull off the road and parkbefore using the phone. Respect the localregulations in countries where you drive and useyour GSM phone. If you want to use your phone ina vehicle, install the hands-free car kit which isdesigned for that purpose, still ensuring you givefull attention to driving. Ensure that your phone andcar kit do not block any air bags or other securitydevices fitted in your car. The use of an alarmsystem to operate a vehicle's light or horn to indicateincoming phone calls is prohibited on public roadsin some countries. Check local regulations.

��

��

�� ##

In case of hot weather or after a prolonged exposureto the sun (e.g. behind a window or a windscreen),the temperature of your phone's casing mightincrease, especially when featuring a metallicfinish. Be very careful in this case when picking upyour phone and also avoid using it with an ambienttemperature over 40°C or below 5°C.

Remember to observe the local regulationsregarding the disposal of your packaging materials,exhausted batteries and old phone and pleasepromote their recycling.Philips has marked the battery and packaging withstandard symbols designed to promote the recyclingand appropriate disposal of your eventual waste.

�8<AB;A8��

��

The battery should not be disposed of with generalhousehold waste.The labelled packaging material is recyclable.A financial contribution has been made to theassociated national packaging recovery andrecycling system (e.g. EcoEmballage in France).

The plastic material is recyclable (also identifies thetype of plastic).

#( 2��!��

��

2��'��$��

Remove and reinstall the battery.Make sure you plugged the jackof the charger into the correctconnector. Then charge the phoneuntil the battery icon has stoppedscrolling. Finally, unplug fromthe charger and try to switch themobile on.

2��'��$��5/�:8��$��$��

Somebody tried to use yourphone but didn’t know the PINcode nor the unblocking code(PUK). Contact your serviceprovider.

A��*��&��

To receive all calls, make surethat none of the features in "Calldivert" is activated.

2�� !��'��

The network connection is lost.Either you are in a radio shadow(in a tunnel or between tallbuildings) or you are outside thenetwork coverage area. Try fromanother place, try to reconnect tothe network (especially whenabroad), or contact your networkoperator for assistance/informa-tion about the network.

2��'��B��'��C��'��'��$��D��-��'��

The display responds moreslowly at very low temperatures.This is normal and does not affectthe operation of the phone. Takethe phone to a warmer place andtry again. In other cases please contact yourphone supplier.

A�� B��3��

Some networks don’t allowmessage exchanges with othernetworks. First check that youentered the number of your SMScentre, or contact your operatorfor detailed information on thissubject.

2��!�� #7

�� '��&�� >�� !��'��6/2��/�8�

Some features are networkdependent. They are onlyavailable, therefore, if thenetwork or your subscriptionsupports them. Contact youroperator for detailed informationon this subject.

A��'��E��

Press and hold or switch offthe phone, check that the SIMcard and the battery are installedcorrectly and switch it on again.

A�� !�� *��

You might be using a charger thatwas not intended for your phone.Make sure you always use thePhilips authentic accessory ship-ped with your phone.

2��'��$��6�8)2�A/")��)�

Check that the SIM card has beeninserted in the right position. Ifthe problem remains, your SIMcard might be damaged. Contactyour operator.

A��'��

Make sure you plugged the jackof the charger into the correctconnector. If your battery iscompletely flat, it might takeseveral minutes of pre-charge (upto 5 in some cases) before thecharging icon is displayed on thescreen.

A��'��E��'��'�� !��&��

This feature is network andsubscription dependent. Contactyour operator for detailedinformation on this subject.

2��'��$��&��

Check that the SIM card has beeninserted in the right position. Ifthe problem remains, your SIMcard may be damaged. Contactyour operator.

#, ��'��

+ ��

Some accessories, such as a battery and a chargerare included as standard in the package of yourmobile phone. Other accessories might be sold inthe commercial package (according to the operatoror the retailer), or sold separately. As a consequen-ce, the package content may vary.

To maximise the performance of your Philipsphone and not to void the warranty, alwayspurchase Philips Authentic Accessories that arespecially designed for use with your phone. PhilipsConsumer Electronics cannot be held liable forany damage due to use with non authorisedaccessories.

Charges your battery in any AC outlet. Smallenough to carry in a briefcase/handbag.

The USB cable enables high speed communicationbetween your phone and your computer. You canmanage the information stored in your phone suchas image, animation, photo, video and music. Youcan also use the cable to charge battery(Thischarging mode is fit for most PC).

Your phone will activate headset mode automati-cally when you plug into the earphone. And you canselect Auto option in answer mode. If this optionísstatus is On, your phone will automatically answerthe incoming call in 2 seconds.

& ��

%#6��

��

�'� �&� ��!��'��)��&� �� #.

#��/��'��"��"��

THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TORADIO WAVES.Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limitsfor exposure to radio frequency (RF) energy defined by the international standards. These recommendationshave been established by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and,the Institute of Electrical and Electronics Engineers - Standards Associations (IEEE-SA) that forcast asubstantial safety margin for assuring the protection of all persons, regardless of age and health.The exposure recommendations for mobile phones use a measurement unit known as the Specific AbsorptionRate (SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by the general public is2,0 W/kg in 10g of tissue and, is 1,6W/kg in 1g of tissue by IEEE-SA (IEEE Std 1528) for the head.Tests for SAR have been conducted using recommended operating positions with the mobile phonetransmitting at its highest certified power level in all tested frequency bands. Although the SAR is determinedat the highest certified power level, the actual SAR levels of the mobile phone while operating are generallybelow the maximum SAR value. This is because the phone is designed to operate at multiple power levels soas to use only the power required to reach the network. In general, the closer you are to a base station antenna,the lower the power output.While there may be differences between the SAR levels of various phones and at various positions, they allmeet the international protection standards for exposure to radio waves.The highest SAR value for this Philips 399 model phone when tested for compliance against the standard was0,413W/kg for ICNIRP recommendation and 0,732W/kg for IEEE Standard. For limiting the radio waves exposure, it is recommended to reduce the mobile phone call duration or to use aheadset. The purpose of those precautions is to take the mobile phone away from the head and the body.

(1

0��1. What Does This Limited Warranty Cover?

Philips warrants to the original retail purchaser(“Consumer” or “You”) that this Philipscellular product and all accessories originallyprovided by Philips in the sales package(“Product”) are free from defects in materials,design and workmanship under normal use inaccordance with the operating instructions andpursuant to the following terms and conditions.This limited warranty extends only to theConsumer for Products purchased and used inthe original country of purchase. The limitedwarranty is valid only in Philips’ intendedcountry of sales of the product.

2. How Long is The Limited Warranty Period?

The limited warranty period for the Productextends for ONE (1) YEAR from the date ofpurchase of the Product, documented by validproof of purchase. The limited warranty fororiginal Philips rechargeable battery extendsfor six (6) months from the date of purchase.

3. What Will Philips Do if The Product is NotFree From Material Defects in Materials and

Workmanship During The Limited WarrantyPeriod?

During the limited warranty period, Philips orits authorized service representative will, at itsoption either repair or replace, without chargefor parts or labour, a materially defectiveProduct with new or refurbished parts orProduct and return such repaired or replacedProduct to the Consumer in working condition.Philips will retain defective parts, modules orequipment.

Repaired or replaced Product will be coveredby this limited warranty for the balance of theoriginal limited warranty period or ninety (90)days from the date of repair or replacementwhichever is longer. Repair or replacement ofProduct, at Philips’ option is your exclusiveremedy.

4. What is Not Covered By This LimitedWarranty?

This limited warranty does not cover:

a) Product that has been subjected to misuse,accident, shipping or other physicaldamage, improper installation, abnormal

(�

operation handling, neglect, inundation,fire, water or other liquid intrusion; or

b) Product that has been damaged due torepair, alteration, or modification byanyone not authorized by Philips; or

c) Product that has reception or operationproblems caused by signal conditions,network reliability or cable or antennasystems; or

d) Product defects or problems caused byuses with non-Philips products oraccessories; or

e) Product which warranty/quality stickers,product serial number or electronic serialnumber has been removed, altered orrendered illegible; or

f) Product purchased, used, serviced, orshipped for repair from outside the originalcountry of purchase, or used forcommercial or institutional purposes(including but not limited to Products usedfor rental purposes); or

g) Product returned without valid proof ofpurchase or which proof of purchase hasbeen altered or is illegible.

h) Normal wear and tear or Force Majeure.

5. How Do You Get Warranty Service?

a) Return the Product to an authorized servicecenter of Philips. You may contact thelocal Philips office for the location of thenearest authorized service center.

b) The SIM card must be removed from theProduct before it is given to Philips. Philipsassumes no liability for damaged or loss ofthe SIM card or the data contained therein.

c) If the Product failure is not covered by thislimited warranty, or this limited warrantyis inapplicable, void or invalid due to anyterms and conditions stated herein, theConsumer will be charged for the cost ofrepair or replacement of the Product and allother related cost incurred in repairing orreplacing the Product.

d) IMPORTANT - you are required to returnthe Product together with a valid proof ofpurchase which must identify the point ofpurchase, date of purchase, Product modeland Product serial number clearly.

6. Other Limitation: This Warranty is The EntireAgreement.

EXCEPT FOR THE EXPRESSWARRANTIES SET FORTH ABOVE ANDTHOSE IMPLIED BY LAW AND WHICHCANNOT BE EXCLUDED OR MODIFIEDBY AGREEMENT, PHILIPS PROVIDES NO

(�

OTHER WARRANTY WHETHEREXPRESS OR IMPLIED (WHETHER BYSTATUTE, UNDER THE OPERATION OFLAW OR OTHERWISE) AND SPECIALLYDISCLAIMS ANY WARRANTY OFSATISFACTORY QUALITYMERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE.PHILIPS’ TOTAL LIABILITY FORDAMAGES RELATING TO OR ARISINGOUT OF THE PURCHASE OR USE OF THEPRODUCT, REGARDLESS OF THE TYPEOR CAUSE OF SUCH DAMAGE OR THEFORM OR CHARACTERISATION OF THECLAIM ASSERTED (E.G. CONTRACT ORTOPIT), SHALL NOT EXCEED THEORIGINAL PURCHASE PRICE PAID FORTHE PRODUCT.

HOWEVER IN NO EVENT SHALL PHILIPSBE LIABLE FOR ANY PUNITIVE,SPECIAL, INCIDENTAL, INDIRECT ORCONSEQUENTIAL DAMAGES (INCLUDINGBUT NOT LIMITED TO THE LOSS OF USE,LOSS OF TIME, INCONVENIENCE,COMMERIAL LOSS, LOST PROFITS,LOST BUSINESS OPPORTUNITIES, COSTOF SUBSTITUTION OF GOODS ORSERVICES, INVESTMENTS, DAMAGE TOGOODWILL OR REPUTATION, OR LOSS

OF DATA AND CLAIMS BY THIRDPARTIES) RESULTING FROM PURCHASEOR USE OF THE PRODUCT, TO THEFULLEST EXTENT ALLOWED BY LAW,WHETHER OR NOT PHILIPS HAS BEENADVISED OF THE POSSIBILTY OF SUCHDAMAGES. THESE LIMITATIONS SHALLAPPLY NOTWITHSTANDING THEFAILURE OF THE ESSENTIAL PURPOSEOF ANY LIMITED REMEDY.

This limited warranty represents the completeand exclusive agreement between theConsumer and Philips with respect to thiscellular Product and it supercedes all prioragreements between the parties, oral or written,and all other communications between theparties relating to the subject matter of thislimited warranty. No carrier, retailer, agent,dealer, employee, thereof, or employee ofPhilips is authorized to make modifications tothis limited warranty and you should not rely onany such representation.

This limited warranty does not affect theConsumer’s statutory rights under applicablenational laws in force.

5

Documents

Philips continuously strives to improve its products ... · Switch on your phone, the screen shows "Insert SIM", press SOS to dial emergency call. In Europe the standard emergency