PHILIPSchassis A8.0. For memory initialization and close contact 904 9040. To enter service mode simultaneously press "VOL -" and "VOL +" panel TV. Exodus - STAND-BY

PHILIPSchassis Anubis S \ DD, 14GX123OA, 14RT235A, 14RT300A, 2OGX105O-855, 21GX1560-8568, 25GX1880-1985, 29GX1890-1995, 21RT118A, 21RT128A, 21RT129A, 21RT132A, 21RT1ZZA, 21RT137 A 21RT138A. Sign in service mode in contact closure M31 and M32 (land) near IC7710. Exodus - STAND-BY.

PHILIPSEM1A chassis, EM2E, EMZE, EM5E, ES.1E, FL, GFL, L04A, L04E, MD2.21E, MD2.22, MD2.25E, MG2.1E, MG3.1E, MG3.2E, MG4.1E, MG5 .1 E, MG7.1E, 28RT71O6, 28RT715, 28RT72O6, 28RT73O6, 28PW8206, 28PW8506, 29RT8OO6, 28RT83O6, 29RT8346, 29RT85O7. 29PT8509, 29RT86O7, 29RT9007, 29RT9O47, 32PW8206, 32PW8406, 32PW8506, 82WA8416, 7OTA7216, 70WA8416),chassis TE1.1E 14PT1347/01, 14PT1547/01, 20PT1547/01, 37TA1437/03, 37PTB1347/19,chassis DPTV325 43PP8320, 43PP8420, 43PP8421, 46PP8621, 50PP8421, 55PP8620.To enter the service menu: with remote fast (up to 4 seconds) to enter with control numbers 062 596 i press "i +" (mode SAM, Service Alignment Mode), or press "MENU" (mode SDM, Service Default Mode, to set the initial values of some parameters useful for the measurement of control points), while in the service menu allowed switching applications. In the right corner z'vytsya inscription DILLER, or SAM, or SDM.In standby SDM regular menu is available, it appears when you press the button "MENU". Button "INDEX" turns-off mode OSD. For the transition to the SAM using the buttons "VOL +" and "VOL-" on the front and hold not less than 4 seconds. To exit the SDM or SAM mode power off.Navigation in both modes - buttons "UP / DOWN".

PHILIPSchassis D16-II, 25DC2660, 28DC2070, 28DC2670 80S31 processor to initialize memory - hold button on the TV "VOL +" and "P +", turn the power switch. For service mode to lock the control points M30 and M31. Exodus - TV.

PHILIPSchassis D2-MAC, EUROCRYPT BBD-901Sign in service: disable the network, press and hold button "+" and "-" on the front panel, turn on the network. Memorization of any change - through the "OK". Exodus - "STANBY"

PHILIPSChassis D2-MAC, EUROCRYPT BDE-353Sign in service: the buttons on the remote control in sequence: [TV DEC] [P +] [P-] [CLOCK-BUTTON] [I-II].Memorization of any change - through the "OK". Exodus - "STANBY"

PHILIPSchassis E-6, 28PT4505 processor SAB-C502-2R20NOn TV and in the operating dial on the remote "TV" "i" "STOP", beginning - "STANBY"

PHILIPSChassis FL1.10, 25PV7505 25SL550 33PT700A/712A processor SAB8032,chassis FL1.7 28ML8600/00B processor SAB8032.1. To lock the memory initialization point S24 S25 located on the board SSP. On the remote press "MENU", "Blue", "red", "MENU", "MENU OFF".2. To activate the lock mode SERVICE MODE control points S23 and S24, located on the motherboard SSP, exit - STAND-BY

PHILIPSchassis GR2.2 AA, 25PT400/42, 25PT410A/42, 28PT400A/42, 28PT450A/42. processor TMP47C1637. Lock contacts M33 and M34 (service) and hit INSTALL in the panel on the power. Inscription appears SER. To exit - on STANDBY.

PHILIPSchassis L01H.2E/AA, 14HT3304/01, 21HT5404/01Z processor TDA9552E, remote PC2882. Sign in service - 024 995 press "MENU" button or 062 596 "i", is another way to enter the service jumper zakorotyty 9631 and 9641. then turn on the TV button POWER. Code for lifting HOTEL - 319 753 and MUTE button

PHILIPSchassis L01.1E.L01.2E, 25RT4107, 21RT5306, 24PW6006, 25RT4457, 25RT5107, 25RT5506, 32PW5407, 32PW6006, 63TA5216, 70WA6216. 82PW6216 Service menu: while in the user menu, click on the remote control: Cursor up, down, left, right.

PHILIPSChassis L6.1, 21PT1342 processor TMP47C1637N, SAA5290,chassis L6. 1 AA, 14PT-1432/43, 14PT-1352/00/01/05/07/11/39, 14,20 PT-1542/01/43, 14PT-1552/00/01/05/11, 20PT- 1342/43, 21PT-1532/58, 37TA-1232/03, 37TA-1432/03, 37TA-1462/18, 37TA-1473/18, 52TB-2452/19, M-2052/00/01, M- 2152/00 / 07/15, M-2182/00, M-M192/05,Chassis L6.2 20PT1353 processor SAA5290ZP/039/040/055 - closed contacts S1 and S2 on the processor (14 output circuits IC7600).

PHILIPSChassis L6.2, 25PT4423 processor TDA9351Remote control mode off once, then symknuty power when the LED goes out, turn on power while holding down the button "text" on the remote control.

PHILIPSchassis L6.2AA, 25PT4103/60 processor SAA5290ZP/040Close control points "0053" and "0054" near the processor. Exodus - "STANBY"

PHILIPSChassis L7.1A, 14PT-118A \ 50B \ 67R \ 94R, 14PT132A \ 50B \ 50R \ 75R, 14PT133A \ 162R, 14PT137A \ 162R, 14PT138A \ 54R \ 58T \ 67R \ 71R \ 74R \ 75R \ 93S, 20PT188A \ 50B \ 67R \ 73R, 20PT120A \ 78R, 20PT132A \ 75R, 20PT137A \ 62R, 20PT138A \ 50D \ 58R \ 58H \ 58R \ 67R \ 71R \ 73R \ 74R \ 75R \ 94R \ 97R. Zakorotit contacts M24 and M25 on-board (PCB) and on the power. Out of service - click on STAND-BY. Attention error buffer is cleared!

PHILIPSL9.1E chassis, L9.2A, 14RT2665/00 21PT1354/58C 21PT1654/58 21PT3882/59R 25PT5307 processor SAA5542Sign in service menu: "0" "6" "2" "5" "9" "6" "MENU"; to log on to the geometry (non-SAM) simultaneously press the "VOL-" and "PR-" Panel TV . Attention! SDM function in AS OFF does not turn on, or (perhaps) your TV stop working. Exodus - "STANBY"

PHILIPSChassis L6.1, 14PT1322, 14PT1323, 14PT1332, 14PT1342, 14PT1352, PT1353, 14PT1363, 14PT1372-374, 14PT1532-1553, 14PT1562-1563, 14PT1573-1574, 14PT2663, 14PT2683-2594, 20PT1342, 20PT1352, 20PT1353, 20PT1542-1553 , 21PT1342, 21PT1532, 21PT1542, 21PT2563-2584, 37TA1220, 37TA1232, 37TA1262-1263, 37TA1273, 37TA1432.37TA1462-1463, 37TA1473, 37TB1252, 51TA1232.51TA1262, 51TA1462, 51TA1472, 51TB1222, 51TB1252, 51TB1452, 52TA1262, 52TA1420-1462 , 52TA1472, 52TB1252, 52TB1452, 2TB2452, M1432-2052, 1932 M21, M21 and all the 52-2192 model chassis L6.2. Method 1 - closed contacts S1 and S2 on the processor (14 output circuits IC7600).Method 2 - on the remote control model RC7150 service click on DEFAULT or ALIGN.

PHILIPSChassis L9.2A, L9.2E, 14RT1582, 14RT1782, 14RT314A / B-3822 14RT3722, 14RT414A, 20RT1582, 20RT1782, 20RT224V, 20RT324A / B-3882 20RT3722, 20RT424, 20RT524A, 21RT1532, 21RT1 582 21RT334A, 21PT3382, 21RT3722885, 21PT534A, 14RT1345, 14RT1354, 14RT1365, 14RT1565, 14RT2665, 14RA01, 17RT1564-1565, 20PR1 554, 20RA01, 20TA01, 21RT1364, 21RT1654, 21RT1664, 21RT1865-2265, 21RT2664-2665, 21RT2684, 21RT4255, 21RT4355, 21RT4455, 21RT4475, 21RT4655, 37TA1274, 37TV1254, 52TA1464, 52TA1474, 52TA441 5 52TV1454, 52TV4395 Press the MUTE button on the remote and no later than 4 seconds, R-, R +, VOL-, VOL + on the front of the TV.

PHILIPSchassis MD1.1E 25PT4301, 25PT4501/60 TMP87CM36N-3270 processor, chassis MD1.2E, 24PW6322, 25RT4503, 25RT4513, 25RT4523, 25RT5123, 25RT5302, 25RT5322, 25RT5403, 25RT5424, 25RTB322, 28DW6734, 28RT4503, 28RT4513, 28RT4523, 28PW6202, 28PW6302 , 28PW6312, 28PW6322, 28PW6332, 29RT5123, 29RT5302, 29RT5322, 29RT5403, 29RT5423-5424, 29RT6413, 29RT6433, 29RT6773, 29RT8001-8005, 29RT8304, 29RT8344, 29RT9005-9006, 29RT9015, 29RT9046, 29RT9055, 29RT9113, 32DW6834, 2PWB302, 32PW6312 , 32PW6322, 32PW6332, 52TA4311, 63TA5213, 70WA6213, 70WB6193, 72TA5213, 82WA6213, 82WB6193. For service mode to lock contacts S42 and S43. Then click on the front of the TV at the same time "MENU" "P-". TV goes to standby SAM, if there are no mistakes and failures in the top row will be zero. Changes are automatically stored. Exodus - POWER OFF button on the control.

PHILIPSchassis MD2.11/12/13 - entrance is via a special menu control RC7150.

PHILIPSMD2.22E 25PT8303 ChassisSimultaneously press the "?" and "SLEEP" under cover. Exodus - POWER OFF

PHILIPSchassis MG2.1E, 24PW8504, 25RT7304, 25RT8304, 28RT7104, 28RT7155, 28RT7204, 28RT7304, 28RT7404, 28PW8504-8505, 28PW9505, 28PW9515, 28PW9545, 29DS100, 29RT8001 -8005, 29RT8304, 29RT8344, 29RT9005-9006, 29RT9015, 29RT9046, 29RT9055 , 32PW8504-8505, 32PW8604, 32PW8806, 32PW9515, 32PW9523, 32PW9534-9535, 32PW9556, 2PW9566, 82WA8414 Press MUTE on the remote control and no later than 4 seconds "MENU" on the front of the TV. Also possibilities:Mode SAM - closed for a second contacts 1 and 2 connector 0356 which is on SSP.Mode SDM - closed for a second contacts 2 and 3 of connector 0356 that is on the SSP.

PHILIPSchassis MG3.1E 28PW9525 28PW8806 28PT7306/58Type of remote combination. Then press "MENU" or "i". Presented several variants of code combinations."0" "6" "2" "5" "9" "6""0" "3" "6" "2" "5" "9" "6""0" "4" "6" "2" "5" "9" "6""0" "7" "6" "2" "5" "9" "6""0" "8" "6" "2" "5" "9" "6""0" "3" "6" "5" "9" "6"

PHILIPS 21PV288/58S EPSILON. To enter service mode to hold the PLAY button on the "TV" button "STOP" on the remote control about 5 seconds. Exit - click on "StandBy" console.

PHILIPS 14PV100/01 14PV505/58 processor SAA5541PS/M5/0194. Sign in service mode by the standby mode. You must simultaneously pressing "PLAY" on the TV and press "STOP" button on the control, while retain about 10 seconds.

PHILIPS28PT4456/00 processor SAA5564PS/M3/0/81. To enter the service to close contact: "GND" and "SMD-servise mode" and turn on the TV in the network that is open 5-15 seconds.

PHILIPS25PT4104/58 - two modes of service:1) SDM - close control points on the chassis GND and SDM.2) SAM-dial on the remote control, without breaks, 062 596 [] button enable OSD.

PHILIPS- Hotel profiles:In models 25PT400/42, 25PT410A/42, 28PT400A/42, 28PT450A/42 hotel mode is activated while pressing the button VOL + and P + on the front panel for several seconds while the program turned 38. Off by pressing VOL-and P-well program in 1938. Programme 38 seconds and used usually for hotel management regime.Model R-131, R-132, R-133, R-165 (chassis AA5) - enable channel 38 (this is important for all models), then hold "MENU" on the front and SLEEP (or OSD) on the remote control at least 4 sec.H + inscription means that the mode vimkneno, H-off.In models 3146, CTT-H instead of clicking on "MENU" button is used SELECT.In models 3121 and 3122 while clicking on INSTALL and P + on the front at the time, not less than 3 seconds then turn off the console and enable key P + or P-.In models R-217, CV6014, CV6107 clicking on INSTALL front and SLEEP on the remote control.In models CV6012, CV6018, CV6109, ANUBIS S (AA, BB, CC, DD) to enable the hotel to keep the regime on the front panel keys and the P-STORE least 3 seconds. enabled the program to 38. To turn off - key P + and VOL-(at least 3 seconds), and in some models - and to turn.The model ANUBIS S DD (and some others), hotel mode is possible only when enabled by an option when enabled 246 and channel 40. Possible option: turn on INSTALL and P +, INSTALL off and VOL-.The model G8 must select VIDEO 2 mode and within one second press on the remote and TELETEXT FEATURE. Put in the appropriate menu OFF.The model G88 as well, but using the SOUND ONLY.The model PV4.0 on channel 38 on the remote click "PICTURE MENU" and FEATURE within 1 sec. to turn the hotel and click the PICTURE mode and OSD to turn.In models Chassis GR1-AX (8-button front panel) to select channel 38, the simultaneous pressing on for 4 seconds and STORE P + hotel mode switches, STORE and CONTROL + (or STORE and CONTROL-) off. For 3-button front panel - simultaneously press STORE on the front and SLEEPTIMER on the remote for 4 seconds, or SELECT on the front and SLEEPTIMER on the remote. Green Label 'H +' on the screen means that the hotel enabled mode, and 'H-' - disabled.