Performance Glazing Performance Grille Pro≤les and ......Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors V250-AW-1 250 Series Awning Performance

Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com V250-AW-1

250 Series Awning

Performance

Glazing Performance

Grille Profiles and Patterns

Size Tables

Design Data

Detailed Product Description

Cross Sections

Document Navigation Tips:Items listed in the table of contents above are active links that will take you to the corresponding page.

The Pella logo on each page is a link back to this table of contents.

Bookmarks are also included in this PDF document and are available as an additional navigation option.

The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information.


250 Series Awning

Performance Data

250 Series Awning

Sizes

Standard Sizes S

Special Sizes Available Built on 1/8" Increments O

Frames

Nail Fin O

Nail Fin with J-Channel O

3-1/4" Block Pocket Install / Replacement S

Double Wall Flush Flange O

Integral 5/8" Flange O

Performance 1Standard Performance

Meets or Exceeds AAMA/WDMA RatingsLC-PG35

Hallmark Certified

Air Infiltration (cfm / ft2 of frame @ 1.57 psf wind pressure.) 0.10

Design Pressure 35 psf

Water Penetration Resistance 7.5 psf

Performance Upgrade

Meets or Exceeds AAMA/WDMA RatingsLC-PG50

Hallmark Certified

Air Infiltration (cfm / ft 2 of frame @ 1.57 psf wind pressure.) 0.10

Design Pressure 50 psf

Water Penetration Resistance 7.5 psf

Other Performance Criteria

Forced Entry Resistance (Minimum Security Grade) 2 10

Maximum Operating Force (lbs) (Initiate Motion / Maintain Motion) 15/6

Sound Transmission Class and Outdoor-Indoor Transmission Class

Frame Size Tested 3

Glazing System

STC Rating

OITC RatingOverall Glazing

ThicknessExterior Glass

ThicknessInterior

Glass ThicknessThird Pane Thickness

Awning – Dual-Pane Insulating Glass

Vent 59" x 23-1/2" 3/4" 3mm 3mm — 30 25

Fixed 59" x 47-1/4" 3/4" 3mm 3mm — 28 24

Awning – Triple-Pane Insulating Glass

Vent 59" x 23-1/2" 1" 3mm 3mm 3mm 34 28

S = Standard; O = Optional; (—) = Not Available

(1) Published performance data is for single unit only. See Design Data pages in this section for specific product performance class and grade values.

(2) The higher the level, the greater the product's ability to resist forced entry.

(3) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration. The presence of low-e or argon have negligible effect on sound attenuation characteristics.


250 Series Awning

Features and Options

250 Series Awning

Glazing (Insulating Glass)

Glazing Type

Dual-pane insulating glass S

Triple-pane insulating glass O

Insulated Glass Options / Low-E Types

Advanced Low-E S

NaturalSun Low-E O

SunDefense™ Low-E 1 O

Bronze-tinted Advanced Low-E 1 O

Additional Glazing Options

Annealed glass S

Tempered glass O

Obscure glass 2 O

Gas Fi l l / High Alt i tude

Argon S

High altitude O

High altitude with argon 1 O

Sash

Foam Insulation O

Performance Upgrade O

Interior / Exterior Color

White Interior/White Exterior S

Almond Interior/Almond Exterior O

Fossil Interior/Fossil Exterior O

White Interior/Brown Exterior O

White Interior/Fossil Exterior O

White Interior/Black Exterior O

White Interior/Brick Red Exterior O

White Interior/Hartford Green Exterior O

White Interior/Morning Sky Gray Exterior O

White Interior/Poplar White Exterior O

White Interior/Portobello Exterior O

White Interior/Tan Exterior O

250 Series Awning

Hardware

Color matched hardware S

Screens

Conventional black fiberglass screens - flat S

Grilles

Gri l les-Between-the-Glass

3/4" Contour O

5/8" flat O

1" Contour O

Grille Patterns: Traditional, Prairie, Top Row, Custom - Equally Divided

O

Simulated-Divided-Light Gri l les 1 (without spacer)

7/8" contour profile O

Grille Patterns: Traditional, Prairie, Top Row, Custom - Equally Divided

O

S = Standard; O = Optional (1) Not available with triple-pane glazing. (2) Contact your local Pella sales representative for current offering.


250 Series Awning

Glazing Performance - Total Unit

R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating

(1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR® values are updated to 2016 (Version 6) criteria.

(2) The values shown are based on Canada's updated ENERGY STAR® 2020 initiative.

Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown.

See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.

Gla

zing

Th

ickn

ess

Type of Glazing NFRC Certified Product #

Glass (mm)

Gap Fill

Performance Values 1

Shaded Areas Meet ENERGY STAR Performance

Criteria in Zones Shown

Ext. Int.

U-F

acto

r

SHG

C

VLT

CR

U. S. Canada 2

Zone ER Zone

Vent — Dual-Pane 3mm Glass N NC SC S CA3/4" Advanced Low-E IG PEL-N-241-00002-00007 3 3 air 0.30 0.25 0.46 55 NC SC S

with SDL or grilles-between-the-glass PEL-N-241-00002-00008 0.30 0.23 0.42 55 NC SC S3/4" Advanced Low-E IG PEL-N-241-00005-00007 3 3 argon 0.27 0.25 0.46 59 N NC SC S

with SDL or grilles-between-the-glass PEL-N-241-00005-00008 0.27 0.23 0.42 59 N NC SC S3/4" NaturalSun Low-E IG PEL-N-241-00001-00007 3 3 air 0.30 0.43 0.52 54 N

with SDL or grilles-between-the-glass PEL-N-241-00001-00008 0.30 0.39 0.47 54 NC3/4" NaturalSun Low-E IG PEL-N-241-00004-00007 3 3 argon 0.27 0.43 0.52 58 N

with SDL or grilles-between-the-glass PEL-N-241-00004-00008 0.27 0.39 0.47 58 N NC3/4" SunDefense™ Low-E IG PEL-N-241-00003-00007 3 3 air 0.29 0.19 0.43 55 NC SC S

with SDL or grilles-between-the-glass PEL-N-241-00003-00008 0.29 0.17 0.38 55 NC SC S3/4" SunDefense Low-E IG PEL-N-241-00006-00007 3 3 argon 0.26 0.19 0.43 59 N NC SC S

with SDL or grilles-between-the-glass PEL-N-241-00006-00008 0.26 0.17 0.38 59 N NC SC S

Vent — Dual-Pane 3mm Glass with Foam Insulation3/4" Advanced Low-E IG PEL-N-241-00040-00007 3 3 air 0.29 0.25 0.46 55 NC SC S

with SDL or grilles-between-the-glass PEL-N-241-00040-00008 0.29 0.23 0.42 55 NC SC S3/4" Advanced Low-E IG PEL-N-241-00043-00007 3 3 argon 0.26 0.25 0.46 59 N NC SC S

with SDL or grilles-between-the-glass PEL-N-241-00043-00008 0.26 0.23 0.42 59 N NC SC S3/4" NaturalSun Low-E IG PEL-N-241-00039-00007 3 3 air 0.30 0.43 0.52 54 N

with SDL or grilles-between-the-glass PEL-N-241-00039-00008 0.30 0.39 0.47 54 NC3/4" NaturalSun Low-E IG PEL-N-241-00042-00007 3 3 argon 0.27 0.43 0.52 58 N

with SDL or grilles-between-the-glass PEL-N-241-00042-00008 0.27 0.39 0.47 58 N NC3/4" SunDefense™ Low-E IG PEL-N-241-00041-00007 3 3 air 0.29 0.19 0.43 55 NC SC S

with SDL or grilles-between-the-glass PEL-N-241-00041-00008 0.29 0.17 0.38 55 NC SC S3/4" SunDefense Low-E IG PEL-N-241-00044-00007 3 3 argon 0.26 0.19 0.43 59 N NC SC S


CA


250 Series Awning







Gla

zing

Th

ickn

ess


Glass (mm)

Gap Fill


Shaded Areas Meet ENERGY STAR® Performance


Ext. Middle Int.

U-F

acto

r

SHG

C

VLT

CR

U. S. Canada 2

Zone ER Zone

Vent — Triple-Pane 3mm Glass N NC SC S CA1" Advanced Low-E Triple-pane IG PEL-N-241-00033-00003 3 3 3 air 0.24 0.21 0.36 64 N NC SC S

with Grilles-between-the-glass PEL-N-241-00034-00002 0.24 0.19 0.32 64 N NC SC S1" Advanced Low-E Triple-pane IG PEL-N-241-00037-00003 3 3 3 argon 0.21 0.21 0.36 67 N NC SC S 26 CA

with Grilles-between-the-glass PEL-N-241-00038-00002 0.21 0.19 0.32 67 N NC SC S 25 CA1" NaturalSun Low-E Triple-pane IG PEL-N-241-00031-00003 3 3 3 air 0.24 0.37 0.46 64 N NC

with Grilles-between-the-glass PEL-N-241-00032-00002 0.25 0.34 0.41 64 N NC1" NaturalSun Low-E Triple-pane IG PEL-N-241-00035-00003 3 3 3 argon 0.21 0.37 0.46 67 N NC 35 CA

with Grilles-between-the-glass PEL-N-241-00036-00002 0.22 0.34 0.41 67 N NC

Vent — Triple-Pane 3mm Glass with Foam Insulation1" Advanced Low-E Triple-pane IG PEL-N-241-00071-00003 3 3 3 air 0.24 0.21 0.36 64 N NC SC S

with Grilles-between-the-glass PEL-N-241-00072-00002 0.24 0.19 0.32 64 N NC SC S1" Advanced Low-E Triple-pane IG PEL-N-241-00075-00003 3 3 3 argon 0.20 0.21 0.36 68 N NC SC S 27 CA

with Grilles-between-the-glass PEL-N-241-00076-00002 0.21 0.19 0.32 68 N NC SC S 25 CA1" NaturalSun Low-E Triple-pane IG PEL-N-241-00069-00003 3 3 3 air 0.24 0.37 0.46 64 N NC

with Grilles-between-the-glass PEL-N-241-00070-00002 0.24 0.34 0.41 64 N NC1" NaturalSun Low-E Triple-pane IG PEL-N-241-00073-00003 3 3 3 argon 0.21 0.37 0.46 67 N NC 35 CA

with Grilles-between-the-glass PEL-N-241-00074-00002 0.21 0.34 0.41 67 N NC 33 CA

CA


250 Series Awning







Gla

zing

Th

ickn

ess


Glass (mm)

Gap Fill


Shaded Areas Meet ENERGY STAR® Performance


Ext. Int.

U-F

acto

r

SHG

C

VLT

CR

U. S. Canada 2

Zone ER Zone

Vent — Dual-Pane 3mm Glass Tinted Glazing N NC SC S CA3/4" Bronze Advanced Low-E IG PEL-N-241-00002-00013 3 5 air 0.30 0.25 0.34 55 NC SC S

with SDL or grilles-between-the-glass PEL-N-241-00002-00014 0.30 0.23 0.31 55 NC SC S3/4" Bronze Advanced Low-E IG PEL-N-241-00005-00013 3 5 argon 0.27 0.24 0.34 59 N NC SC S


Vent — 3mm Glass Tinted Glazing with Foam Insulation3/4" Bronze Advanced Low-E IG PEL-N-241-00040-00013 3 3 air 0.29 0.25 0.34 55 NC SC S

with SDL or grilles-between-the-glass PEL-N-241-00040-00014 0.29 0.23 0.31 55 NC SC S3/4" Bronze Advanced Low-E IG PEL-N-241-00040-00013 3 3 argon 0.26 0.24 0.34 59 N NC SC S


CA


250 Series Awning

Grilles

Grille Profiles Grilles-Between-the-Glass Simulated-Divided-Light Grilles

3/4"

3/4" ContourSimulated Divided Light

7/8" 1" Contour

1"

3/4" Contour

3/4"

5/8" Flat

5/8" 7/8"

Grille Patterns

Prairie Lite Patterns

9-Lite Prairie

Prairie

- Approximately 4" from edge of sash to center of bar.

- Minimum actual glass is 13".

Other Available Patterns

Traditional Top Row

Traditional

- Specify number of lites.

- Grilles must be equally divided on visible glass.

- Minimum 6" x 6".

Top Row

- Standard visible glass to separator bar must be ≤1/2 upper actual glass.

Custom — Equally Divided

For traditional patterns, see size tables.


250 Series Awning

Size Tables - Vent

1-4/1-3

5-0/2-44-6/2-43-0/2-42-4/2-4 2-6/2-4 2-8/2-4 4-0/2-4

5-0/3-84-6/3-84-0/3-8

5-0/3-64-6/3-64-0/3-6

5-0/3-04-6/3-03-0/3-0 4-0/3-0

5-0/2-84-6/2-83-0/2-82-8/2-8 4-0/2-8

5-0/2-64-6/2-63-0/2-62-6/2-6 2-8/2-6 4-0/2-6

5-0/2-04-6/2-03-0/2-02-0/2-0 2-4/2-0 2-6/2-0 2-8/2-0 4-0/2-0

5-0/1-3

5-0/1-6

4-6/1-3

4-6/1-6

3-0/1-3

3-0/1-6

2-0/1-3 2-4/1-3 2-6/1-3 2-8/1-3 4-0/1-31-6/1-3

1-6/1-6 2-0/1-6 2-4/1-6 2-6/1-6 2-8/1-6 4-0/1-6

"/ 21

16"1' 4

(419)(406)

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21

433' 8

"

(1 1

18)

(1 1

05)

413' 6

"

(1 0

67)

(1 0

54)

3' 0

"35(9

02)

(914

)

272' 4

""

/ 21

"/ 21

(1 359)(1 372)

4' 6"53

5' 0""/ 2159

(1 524)(1 511)

4' 0""/ 2147"/ 21"/ 21"/ 21"/ 21 "/ 21"/ 21

(902)(914)

3' 0"

(368

)

14(381

)

1' 3

"

Frame

Opening

292' 6

"

(762

)(7

49)

312' 8

"

(813

)(8

00)

232' 0

"

(711

)(6

99)

(597

)(6

10)

171' 6

"

(457

)(4

45)

292' 6"

(762)(749)

232' 4"

(711)(699)

272' 0"

(610)(597)

1' 6"17

(457)(445) (800)

(813)

2' 8"31 35

(1 219)(1 207)

Not to scale.


250 Series Awning

Size Tables - Fixed

6-0/2-05-0/2-04-6/2-04-0/2-02-8/2-01-4/2-0 1-6/2-0 2-0/2-0 2-4/2-0 2-6/2-0 3-0/2-0

6-0/6-05-0/6-04-6/6-04-0/6-02-8/6-01-4/6-0 1-6/6-0 2-0/6-0 2-4/6-0 2-6/6-0 3-0/6-0

6-0/5-65-0/5-64-6/5-64-0/5-62-8/5-61-4/5-6 1-6/5-6 2-0/5-6 2-4/5-6 2-6/5-6 3-0/5-6

6-0/5-05-0/5-04-6/5-04-0/5-02-8/5-01-4/5-0 1-6/5-0 2-0/5-0 2-4/5-0 2-6/5-0 3-0/5-0

6-0/4-65-0/4-64-6/4-64-0/4-62-8/4-61-4/4-6 1-6/4-6 2-0/4-6 2-4/4-6 2-6/4-6 3-0/4-6

6-0/4-05-0/4-04-6/4-04-0/4-02-8/4-01-4/4-0 1-6/4-0 2-0/4-0 2-4/4-0 2-6/4-0 3-0/4-0

6-0/3-85-0/3-84-6/3-84-0/3-82-8/3-81-4/3-8 1-6/3-8 2-0/3-8 2-4/3-8 2-6/3-8 3-0/3-8

6-0/3-65-0/3-64-6/3-64-0/3-62-8/3-61-4/3-6 1-6/3-6 2-0/3-6 2-4/3-6 2-6/3-6 3-0/3-6

6-0/3-05-0/3-04-6/3-04-0/3-02-8/3-01-4/3-0 1-6/3-0 2-0/3-0 2-4/3-0 2-6/3-0 3-0/3-0

6-0/2-85-0/2-84-6/2-84-0/2-82-8/2-81-4/2-8 1-6/2-8 2-0/2-8 2-4/2-8 2-6/2-8 3-0/2-8

6-0/2-65-0/2-64-6/2-64-0/2-62-8/2-61-4/2-6 1-6/2-6 2-0/2-6 2-4/2-6 2-6/2-6 3-0/2-6

6-0/2-45-0/2-44-6/2-44-0/2-42-8/2-41-4/2-4 1-6/2-4 2-0/2-4 2-4/2-4 2-6/2-4 3-0/2-4

6-0/1-3

6-0/1-6

5-0/1-3

5-0/1-6

4-6/1-3

4-6/1-6

4-0/1-3

4-0/1-6

2-8/1-3

2-8/1-6

1-6/1-3 2-0/1-3 2-4/1-3 2-6/1-3 3-0/1-31-4/1-3

1-4/1-6 1-6/1-6 2-0/1-6 2-4/1-6 2-6/1-6 3-0/1-6

716' 0

"

(1 8

29)

(1 8

16) "

/ 21595'

0"

(1 5

24)

(1 5

11) "

/ 21474'

0"

(1 2

19)

(1 2

07) "

/ 21534'

6"

(1 3

72)

(1 3

59) "

/ 21"

/ 21655'

6"

(1 6

76)

(1 6

64)

6' 0""/ 2171

(1 829)(1 816)

"/ 21"/ 21

1' 6"17

(457)(445)

"/ 21

433' 8

"

(1 1

18)

(1 1

05)

413' 6

"

(1 0

67)

(1 0

54)

3' 0

"35(9

02)

(914

)

272' 4

"

"/ 21

(1 359)(1 372)

4' 6"53

5' 0""/ 2159

(1 524)(1 511)

4' 0""/ 2147"/ 21"/ 21"/ 21"/ 21 "/ 21

"/ 21

(902)(914)

3' 0"

(368

)

14(381

)

1' 3

"

FrameOpening

292' 6

"

(762

)(7

49)

312' 8

"

(813

)(8

00)

232' 0

"

(711

)(6

99)

(597

)(6

10)

171' 6

"

(457

)(4

45)

292' 6"

(762)(749)

232' 4"

(711)(699)

272' 0"

(610)(597)

16"1' 4

(419)(406) (800)

(813)

2' 8"31 35

(1 219)(1 207)

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21

"/ 21 "/ 21"/ 21"/ 21"/ 21"/ 21"/ 21 "/ 21

"/ 21

T

T T

T

TT

T - Requires tempered glass due to aspect ratio.

Not to scale.


250 Series Awning

Special Sizes and Dimensions

1-Wide Vent 1-Wide Fixed

MINIMUM16" W x 14-1/2" H

(406 x 368)

MAXIMUM59-1/2" W x 43-1/2" H

(1 511 x 1 105)

MINIMUM14-1/2" W x 14-1/2"H

(368 x 368)

MAXIMUM71-1/2" W x 71-1/2" H

(1 816 x 1 816)

General Notes:

To convert areas to square meters (m2), multiply square feet by 0.0929.Rough Opening = Frame Dimension + 1/2".Keep frame di men sions to the near est 1/8" increment.Tempered glass must measure ≥ 18-1/2" diagonally.If glass width to height ratio is > 5 to 1, then unit must be tempered.

Miscellaneous Formulas

1-Wide Vent 1-Wide Fixed

Visible GlassVGW = FW – 6.188"

VGH = FH – 6.188"

VGW = FW – 5.125"

VGH = FH – 5.125"

Actual Glass AGW = FW – 5.188"

AGH = FH – 5.188"

AGW = FW – 4"

AGH = FH – 4"

Vent Area ((FW – 5.625") x (8.25")) ÷ 144

Key:

AGW = Actual Glass Width AGH = Actual Glass Height FW = Frame Width FH = Frame Height VGW = Visible Glass Width VGH = Visible Glass Height


250 Series Awning

Design Data

Single Vent

Call Out

Frame Vent Area Ft 2

Visible Glass

Ft 2

Standard Glass Thickness (mm) Performance

Class & Grade 1Width

(Inches)Height (Inches)

Annealed Tempered

1-4/1-3 16 14-1/2 0.5 0.6 2.5 3 LC35/LC50

1-6/1-3 17-1/2 14-1/2 0.6 0.7 2.5 3 LC35/LC50

1-6/1-6 17-1/2 17-1/2 0.9 0.9 2.5 3 LC35/LC50

2-0/1-3 23-1/2 14-1/2 0.9 1.0 2.5 3 LC35/LC50

2-0/1-6 23-1/2 17-1/2 1.3 1.4 2.5 3 LC35/LC50

2-0/2-0 27-1/2 23-1/2 2.0 2.1 2.5 3 LC35/LC50

2-4/1-3 27-1/2 14-1/2 1.1 1.2 2.5 3 LC35/LC50

2-4/1-6 27-1/2 17-1/2 1.5 1.7 2.5 3 LC35/LC50

2-4/2-0 27-1/2 23-1/2 2.5 2.6 2.5 3 LC35/LC50

2-4/2-4 27-1/2 27-1/2 3.1 3.2 2.5 3 LC35/LC50

2-6/1-3 29-1/2 14-1/2 1.2 1.3 2.5 3 LC35/LC50

2-6/1-6 29-1/2 17-1/2 1.7 1.8 2.5 3 LC35/LC50

2-6/2-0 29-1/2 23-1/2 2.7 2.8 2.5 3 LC35/LC50

2-6/2-4 29-1/2 27-1/2 3.4 3.5 2.5 3 LC35/LC50

2-6/2-6 29-1/2 29-1/2 3.7 3.8 2.5 3 LC35/LC50

2-8/1-3 31-1/2 14-1/2 1.3 1.5 2.5 3 LC35/LC50

2-8/1-6 31-1/2 17-1/2 1.8 2.0 2.5 3 LC35/LC50

2-8/2-0 31-1/2 23-1/2 2.9 3.0 2.5 3 LC35/LC50

2-8/2-4 31-1/2 27-1/2 3.6 3.7 2.5 3 LC35/LC50

2-8/2-6 31-1/2 29-1/2 4.0 4.1 2.5 3 LC35/LC50

2-8/2-8 31-1/2 31-1/2 4.4 4.4 2.5 3 LC35/LC50

3-0/1-3 35-1/2 14-1/2 1.5 1.7 2.5 3 LC35/LC50

3-0/1-6 35-1/2 17-1/2 2.1 2.3 2.5 3 LC35/LC50

3-0/2-0 35-1/2 23-1/2 3.4 3.5 2.5 3 LC35/LC50

3-0/2-4 35-1/2 23-1/2 4.2 4.3 2.5 3 LC35/LC50

3-0/2-6 35-1/2 29-1/2 4.6 4.7 2.5 3 LC35/LC50

3-0/2-8 35-1/2 31-1/2 5.0 5.2 2.5 3 LC35/LC50

3-0/3-0 35-1/2 35-1/2 5.9 6.0 2.5 3 LC35/LC50

4-0/1-3 47-1/2 14-1/2 2.0 2.4 2.5 3 LC35/LC50

4-0/1-6 47-1/2 17-1/2 2.9 3.2 2.5 3 LC35/LC50

4-0/2-0 47-1/2 23-1/2 4.7 5.0 2.5 3 LC35/LC50

4-0/2-4 47-1/2 27-1/2 5.9 6.1 2.5 3 LC35/LC50

4-0/2-6 47-1/2 29-1/2 6.4 6.7 2.5 3 LC35/LC50

4-0/2-8 47-1/2 31-1/2 7.0 7.3 2.5 3 LC35/LC50

4-0/3-0 47-1/2 35-1/2 8.2 8.4 2.5 3 LC35/LC50

4-0/3-6 47-1/2 41-1/2 10.0 10.1 2.5 3 LC35/LC50

4-0/3-8 47-1/2 43-1/2 10.6 10.7 2.5 3 LC35/LC50

Single Vent

Call Out

Frame Vent Area Ft 2

Visible Glass

Ft 2




Annealed Tempered

4-6/1-3 53-1/2 14-1/2 2.3 2.7 2.5 3 LC35/LC50

4-6/1-6 53-1/2 17-1/2 3.3 3.7 2.5 3 LC35/LC50

4-6/2-0 53-1/2 23-1/2 5.3 5.7 2.5 3 LC35/LC50

4-6/2-4 53-1/2 27-1/2 6.7 7.0 2.5 3 LC35/LC50

4-6/2-6 53-1/2 29-1/2 7.4 7.7 2.5 3 LC35/LC50

4-6/2-8 53-1/2 31-1/2 8.0 8.3 2.5 3 LC35/LC50

4-6/3-0 53-1/2 35-1/2 9.4 9.6 2.5 3 LC35/LC50

4-6/3-6 53-1/2 41-1/2 11.4 11.6 2.5 3 LC35/LC50

4-6/3-8 53-1/2 43-1/2 12.1 12.3 2.5 3 LC35/LC50

5-0/1-3 59-1/2 14-1/2 2.6 3.1 2.5 3 LC35/LC50

5-0/1-6 59-1/2 17-1/2 3.7 4.2 2.5 3 LC35/LC50

5-0/2-0 59-1/2 23-1/2 6.0 6.4 2.5 3 LC35/LC50

5-0/2-4 59-1/2 27-1/2 7.5 7.9 2.5 3 LC35/LC50

5-0/2-6 59-1/2 29-1/2 8.3 8.6 2.5 3 LC35/LC50

5-0/2-8 59-1/2 31-1/2 9.0 9.4 2.5 3 LC35/LC50

5-0/3-0 59-1/2 35-1/2 10.5 10.9 2.5 3 LC35/LC50

5-0/3-6 59-1/2 41-1/2 12.8 13.1 2.5 3 LC35/LC50

5-0/3-8 59-1/2 41-1/2 13.6 13.8 2.5 3 LC35/LC50

(1) Maximum performance when glazed with the appropriate glass thickness. Second value requires performance upgrade.

Certain glass aspect ratios require tempered glass.

To convert areas to square meters (m²), multiply square feet by 0.0929.


250 Series Awning

Design Data

Single Fixed

Call Out

Frame Visible Glass

Ft 2




Annealed Tempered

1-4/1-3 16 14-1/2 0.7 3 3 LC50

1-4/1-6 16 17-1/2 1.0 3 3 LC50

1-4/2-0 16 23-1/2 1.4 3 3 LC50

1-4/2-4 16 27-1/2 1.7 3 3 LC50

1-4/2-6 16 29-1/2 1.9 3 3 LC50

1-4/2-8 16 31-1/2 2.0 3 3 LC50

1-4/3-0 16 35-1/2 2.3 3 3 LC50

1-4/3-6 16 41-1/2 2.8 3 3 LC50

1-4/3-8 16 43-1/2 2.9 3 3 LC50

1-4/4-0 16 47-1/2 3.2 3 3 LC50

1-4/4-6 16 53-1/2 3.7 3 3 LC50

1-4/5-0 16 59-1/2 4.2 3 3 LC50

1-4/5-6 16 65-1/2 4.6 — 3 LC50

1-4/6-0 16 71-1/2 5.1 — 3 LC50

1-6/1-3 17-1/2 14-1/2 0.8 3 3 LC50

1-6/1-6 17-1/2 17-1/2 1.1 3 3 LC50

1-6/2-0 17-1/2 23-1/2 1.6 3 3 LC50

1-6/2-4 17-1/2 27-1/2 2.0 3 3 LC50

1-6/2-6 17-1/2 29-1/2 2.1 3 3 LC50

1-6/2-8 17-1/2 31-1/2 2.3 3 3 LC50

1-6/3-0 17-1/2 35-1/2 2.6 3 3 LC50

1-6/3-6 17-1/2 41-1/2 3.2 3 3 LC50

1-6/3-8 17-1/2 43-1/2 3.3 3 3 LC50

1-6/4-0 17-1/2 47-1/2 3.7 3 3 LC50

1-6/4-6 17-1/2 53-1/2 4.2 3 3 LC50

1-6/5-0 17-1/2 59-1/2 4.7 3 3 LC50

1-6/5-6 17-1/2 65-1/2 5.3 3 3 LC50

1-6/6-0 17-1/2 71-1/2 5.8 — 3 LC50

2-0/1-3 23-1/2 14-1/2 1.2 3 3 LC50

2-0/1-6 23-1/2 17-1/2 1.6 3 3 LC50

2-0/2-0 23-1/2 23-1/2 2.4 3 3 LC50

2-0/2-4 23-1/2 27-1/2 2.9 3 3 LC50

2-0/2-6 23-1/2 29-1/2 3.1 3 3 LC50

2-0/2-8 23-1/2 31-1/2 3.4 3 3 LC50

2-0/3-0 23-1/2 35-1/2 3.9 3 3 LC50

2-0/3-6 23-1/2 41-1/2 4.7 3 3 LC50

2-0/3-8 23-1/2 43-1/2 4.9 3 3 LC50

2-0/4-0 23-1/2 47-1/2 5.5 3 3 LC50

2-0/4-6 23-1/2 53-1/2 6.2 3 3 LC50

2-0/5-0 23-1/2 59-1/2 7.0 3 3 LC50

2-0/5-6 23-1/2 65-1/2 7.8 3 3 LC50

2-0/6-0 53-1/2 29-1/2 7.4 3 3 LC50

Single Fixed

Call Out

Frame Visible Glass

Ft 2




Annealed Tempered

2-4/1-3 27-1/2 14-1/2 1.5 3 3 LC50

2-4/1-6 27-1/2 17-1/2 2.0 3 3 LC50

2-4/2-0 27-1/2 23-1/2 2.9 3 3 LC50

2-4/2-4 27-1/2 27-1/2 3.5 3 3 LC50

2-4/2-6 27-1/2 29-1/2 3.8 3 3 LC50

2-4/2-8 27-1/2 31-1/2 4.1 3 3 LC50

2-4/3-0 27-1/2 35-1/2 4.8 3 3 LC50

2-4/3-6 27-1/2 41-1/2 5.7 3 3 LC50

2-4/3-8 27-1/2 43-1/2 6.0 3 3 LC50

2-4/4-0 27-1/2 47-1/2 6.6 3 3 LC50

2-4/4-6 27-1/2 53-1/2 7.6 3 3 LC50

2-4/5-0 27-1/2 59-1/2 8.5 3 3 LC50

2-4/5-6 27-1/2 65-1/2 9.5 3 3 LC50

2-4/6-0 27-1/2 71-1/2 10.4 3 3 LC50

2-6/1-3 29-1/2 14-1/2 1.6 3 3 LC50

2-6/1-6 29-1/2 17-1/2 2.1 3 3 LC50

2-6/2-0 29-1/2 23-1/2 3.1 3 3 LC50

2-6/2-4 29-1/2 27-1/2 3.8 3 3 LC50

2-6/2-6 29-1/2 29-1/2 4.2 3 3 LC50

2-6/2-8 29-1/2 31-1/2 4.5 3 3 LC50

2-6/3-0 29-1/2 35-1/2 5.2 3 3 LC50

2-6/3-6 29-1/2 41-1/2 6.2 3 3 LC50

2-6/3-8 29-1/2 43-1/2 6.6 3 3 LC50

2-6/4-0 29-1/2 47-1/2 7.2 3 3 LC50

2-6/4-6 29-1/2 53-1/2 8.3 3 3 LC50

2-6/5-0 29-1/2 59-1/2 9.3 3 3 LC50

2-6/5-6 29-1/2 29-1/2 10.3 3 3 LC50

2-6/6-0 29-1/2 71-1/2 11.3 3 3 LC50

1 of 3





250 Series Awning

Design Data

Single Fixed

Call Out

Frame Visible Glass

Ft 2




Annealed Tempered

2-8/1-3 31-1/2 14-1/2 1.7 3 3 LC50

2-8/1-6 31-1/2 17-1/2 2.3 3 3 LC50

2-8/2-0 31-1/2 23-1/2 3.4 3 3 LC50

2-8/2-4 31-1/2 27-1/2 4.1 3 3 LC50

2-8/2-6 31-1/2 29-1/2 4.5 3 3 LC50

2-8/2-8 31-1/2 31-1/2 4.9 3 3 LC50

2-8/3-0 31-1/2 35-1/2 5.6 3 3 LC50

2-8/3-6 31-1/2 41-1/2 6.7 3 3 LC50

2-8/3-8 31-1/2 43-1/2 7.1 3 3 LC50

2-8/4-0 31-1/2 47-1/2 7.8 3 3 LC50

2-8/4-6 31-1/2 53-1/2 8.9 3 3 LC50

2-8/5-0 31-1/2 59-1/2 10.0 3 3 LC50

2-8/5-6 31-1/2 65-1/2 11.1 3 3 LC50

2-8/6-0 31-1/2 71-1/2 12.2 3 3 LC50

3-0/1-3 35-1/2 14-1/2 2.0 3 3 LC50

3-0/1-6 35-1/2 17-1/2 2.6 3 3 LC50

3-0/2-0 35-1/2 23-1/2 3.9 3 3 LC50

3-0/2-4 35-1/2 27-1/2 4.8 3 3 LC50

3-0/2-6 35-1/2 29-1/2 5.2 3 3 LC50

3-0/2-8 35-1/2 31-1/2 5.6 3 3 LC50

3-0/3-0 35-1/2 35-1/2 6.5 3 3 LC50

3-0/3-6 35-1/2 41-1/2 7.7 3 3 LC50

3-0/3-8 35-1/2 43-1/2 8.2 3 3 LC50

3-0/4-0 35-1/2 47-1/2 9.0 3 3 LC50

3-0/4-6 35-1/2 53-1/2 10.3 3 3 LC50

3-0/5-0 35-1/2 59-1/2 11.5 3 3 LC50

3-0/5-6 35-1/2 65-1/2 12.8 3 3 LC50

Single Fixed

Call Out

Frame Visible Glass

Ft 2




Annealed Tempered

4-0/1-3 47-1/2 14-1/2 2.8 3 3 LC50

4-0/1-6 47-1/2 17-1/2 3.7 3 3 LC50

4-0/2-0 47-1/2 23-1/2 5.5 3 3 LC50

4-0/2-4 47-1/2 27-1/2 6.6 3 3 LC50

4-0/2-6 47-1/2 29-1/2 7.2 3 3 LC50

4-0/2-8 47-1/2 31-1/2 7.8 3 3 LC50

4-0/3-0 47-1/2 35-1/2 9.0 3 3 LC50

4-0/3-6 47-1/2 41-1/2 10.8 3 3 LC50

4-0/3-8 47-1/2 43-1/2 11.4 3 3 LC50

4-0/4-0 47-1/2 47-1/2 12.5 3 3 LC50

4-0/4-6 47-1/2 53-1/2 14.3 3 3 LC50

4-0/5-0 47-1/2 59-1/2 16.1 3 3 LC50

4-0/5-6 47-1/2 65-1/2 17.9 3 3 LC50

4-0/6-0 47-1/2 71-1/2 19.6 3 3 LC50

4-6/1-3 53-1/2 14-1/2 3.2 3 3 LC50

4-6/1-6 53-1/2 17-1/2 4.2 3 3 LC50

4-6/2-0 53-1/2 23-1/2 6.2 3 3 LC50

4-6/2-4 53-1/2 27-1/2 7.6 3 3 LC50

4-6/2-6 53-1/2 29-1/2 8.3 3 3 LC50

4-6/2-8 53-1/2 31-1/2 8.9 3 3 LC50

4-6/3-0 53-1/2 35-1/2 10.3 3 3 LC50

4-6/3-6 53-1/2 41-1/2 12.3 3 3 LC50

4-6/3-8 53-1/2 43-1/2 13.0 3 3 LC50

4-6/4-0 53-1/2 47-1/2 14.3 3 3 LC50

4-6/4-6 53-1/2 53-1/2 16.3 3 3 LC50

4-6/5-0 53-1/2 59-1/2 18.4 3 3 LC50

4-6/5-6 53-1/2 65-1/2 20.4 3 3 LC50

4-6/6-0 53-1/2 71-1/2 22.4 3 3 LC50

2 of 3





250 Series Awning

Design Data

Single Fixed

Call Out

Frame Visible Glass

Ft 2




Annealed Tempered

5-0/1-3 59-1/2 14-1/2 3.6 — 3 LC50

5-0/1-6 59-1/2 17-1/2 4.7 3 3 LC50

5-0/2-0 59-1/2 23-1/2 7.0 3 3 LC50

5-0/2-4 59-1/2 27-1/2 8.5 3 3 LC50

5-0/2-6 59-1/2 29-1/2 9.3 3 3 LC50

5-0/2-8 59-1/2 31-1/2 10.0 3 3 LC50

5-0/3-0 59-1/2 35-1/2 11.5 3 3 LC50

5-0/3-6 59-1/2 41-1/2 13.8 3 3 LC50

5-0/3-8 59-1/2 43-1/2 14.6 3 3 LC50

5-0/4-0 59-1/2 47-1/2 16.1 3 3 LC50

5-0/4-6 59-1/2 53-1/2 18.4 3 3 LC50

5-0/5-0 59-1/2 59-1/2 20.6 3 3 LC50

5-0/5-6 59-1/2 65-1/2 22.9 3 3 LC50

5-0/6-0 59-1/2 71-1/2 25.2 3 3 LC50

6-0/1-3 71-1/2 14-1/2 4.4 — 3 LC50

6-0/1-6 71-1/2 17-1/2 5.8 — 3 LC50

6-0/2-0 71-1/2 23-1/2 8.5 3 3 LC50

6-0/2-4 71-1/2 27-1/2 10.4 3 3 LC50

6-0/2-6 71-1/2 29-1/2 11.3 3 3 LC50

6-0/2-8 71-1/2 31-1/2 12.2 3 3 LC50

6-0/3-0 71-1/2 35-1/2 14.1 3 3 LC50

6-0/3-6 71-1/2 41-1/2 16.9 3 3 LC50

6-0/3-8 71-1/2 43-1/2 17.8 3 3 LC50

6-0/4-0 71-1/2 47-1/2 19.6 3 3 LC50

6-0/4-6 71-1/2 53-1/2 22.4 3 3 LC50

6-0/5-0 71-1/2 59-1/2 25.2 3 3 LC50

6-0/5-6 71-1/2 65-1/2 27.9 3 3 LC50

6-0/6-0 71-1/2 71-1/2 30.7 3 3 LC50

3 of 3





250 Series Awning

Detailed Product Description

Frame • Overall frame depth: 3-1/4" on all frame types. • Frame members are mitered and heat fused to provide a fully welded

corner assembly. Sill is fitted with weeps.• Frame: [1-1/8" setback nail fin for 2-1/8" wall depth] [Block frame for

3-1/4" wall depth] [Integral 5/8" flange for 3" wall depth]. • Interior and exterior frame surfaces are extruded rigid PVC.

Sash• Sash members are extruded, rigid PVC [with optional foam insulation 1].• Sash members are mitered and heat-fused to provide a fully welded

corner assembly.• Contains sealed insulating glass.

Weatherstripping• Vent units include weatherstripping around the sash perimeter with a fin-

type, pile and an extruded bulb weatherstrip.

Glazing System• Quality float glass complying with ASTM C 1036.• Exterior face-glazed sealed insulating glass. • Dual-Pane insulating glass [[annealed] [tempered]] [[Advanced]

[NaturalSun] [SunDefense™] [Bronze, Advanced] Low-E coated [with Argon]] [Obscure 2] [High Altitude 1].

-or-• 1" Triple-Pane [[annealed] [tempered]] [[Advanced] [NaturalSun] Low-E

coated [with Argon]] [Obscure 2] [High Altitude 1].

Interior / Exterior• Window frame and sash members are [[White] [Almond] [Fossil] with

integral color extruded throughout the profiles] [[Brown] [Black] [Brick Red] [Hartford Green] [Morning Sky Gray] [Poplar White] [Portobello] [Tan] [Fossil] exterior, consisting of a solar reflective coating exceeding AAMA 613 test requirements, with White integral color extruded throughout the profiles on the interior].

• All exposed PVC surfaces are smooth, glossy and uniform in appearance.

Hardware • Dual lock with dual handles. Lock handles on jambs. Lock tie-bars are

stainless steel.• High quality [steel] [stainless steel] dual-arm roto-operator with fold

down crank handle located on sill.• Hinge arms are [steel] [stainless steel]. • Corrosion-resistant fasteners of PVC-compatible material.• Hardware finish is [White] [Almond] [Fossil].

Insect screen• Set in aluminum frame and fitted to interior of window.• Screen frame finish is baked enamel, color to match interior.• Supplied complete with all necessary hardware.• Conventional Black Fiberglass

� Black vinyl coated 18/16 mesh fiberglass screen cloth complying with ASTM D 3656 and SMA 1201.

Optional ProductsGrilles • Grilles-Between-the-Glass

� [Dual-Pane Insulating glass contains [[3/4"] [1"] contoured] [5/8" flat] aluminum grilles permanently installed between two panes of glass] [Triple-Pane Insulating glass contains 3/4" contoured aluminum grilles permanently installed between three panes of glass].

� Patterns are [Traditional] [9-Lite Prairie] [Top Row]. � Interior grille color matches interior frame. � Exterior grille color [3/4" Grille is [White] [Almond 3] [Fossil 3]

[Brown] [Black] [Brick Red] [Hartford Green] [Morning Sky Gray] [Poplar White] [Portobello] [Tan]] [1" Grille is [White] [Almond 3] [Fossil3]] [5/8" Grille is [White] [Almond 3] [Fossil 3]].

-or-• Simulated-Divided-Light grilles without spacer

� 7/8" Grilles permanently bonded to the interior and exterior of glass.

� Patterns are [Traditional] [9-Lite Prairie] [Top Row]. � Grilles match color of interior and exterior frame. � Available only on units glazed with dual-pane insulated glass.

Hardware• Optional limited opening hardware available for vent units in [White]

[Almond] [Fossil] extruded vinyl to match the unit; nominal 3" opening.• Optional window opening control device available for field installation.

Device allows window to open less than 4" with normal operation, with a release mechanism that allows the sash to open completely. Complies with ASTM F2090-10.

(1) Dual Pane IG High Altitude glazings are available with or without Argon. Triple Pane IG High Altitude glazings are only available without Argon.

(2) Obscure glass not available with Bronze Advanced Low-E IG.

(3) Almond grilles only available on Almond units. Almond units with grilles will have an Almond grille color, Fossil extruded color units with grilles have a Fossil grille color.


250 Series Awning

Optional Foam Insulation

[83]3 1/4" OAW

VENT HEAD

SILLOPERATOR

LOCK JAMBS

Scale 3" = 1' 0" All dimensions are approximate.


250 Series Awning

Unit Sections - Frame Types

[79]

3 1/

16"

[58]

2 1/

4"[1

6]5/

8"

[79]

3 1/

16"

[58]

2 1/

4"[1

6]5/

8"

[79]

3 1/

16"

[58]

2 1/

4"[1

6]5/

8"

[79]

3 1/

16"

[58]

2 1/

4"[1

6]5/

8"

[63]2 1/2"

[65]

2 9/

16"

[63]2 1/2"

[65]

2 9/

16"

[63]2 1/2"

[65]

2 9/

16"

1" Insulating Glass

3/4"

[29]

1 1/

8"

[54]2 1/8"

[19]3/4"

[19]3/8"

[79]

3 1/

16"

[58]

2 1/

4"[1

6]5/

8"

[65]

2 9/

16"

[79]

3 1/

16"

[58]

2 1/

4"[1

6]5/

8"[5

7]2

1/4"

[77]3"

[6]1/4"

[65]

2 9/

16"

[79]

3 1/

16"

[58]

2 1/

4"[1

6]5/

8"

[65]

2 9/

16"

[16]

5/8"

[77]3"

[6]1/4"

[63]2 1/2"

[83]3 1/4" OAW

[79]

3 1/

16"

[65]

2 9/

16"

[58]

2 1/

4"[1

6]5/

8"

[54]2 1/8"

[29]1 1/8"

[29]

1 1/

8"

[65]

2 9/

16"

GLAZING OPTIONS

1" Triple Pane IG3/4" Insulating Glass

5/8" INTEGRAL FLANGEBLOCK FRAME with

with J-CHANNELNAIL FIN

NAIL FINSTANDARD

FLUSH FLANGE

BLOCK FRAMESTANDARD



250 Series Awning

Unit Sections - Integral Nail-Fin

[16]

5/8"

4 9/16" Wall

[62]2 7/16"

[29]1 1/8"

[63]

2 1/

2"

6 9/16" Wall4 9/16" Wall

[63]2 1/2"

[29]

1 1/

8"

[16]5/8"

[58]2 1/4"

[79]3 1/16"

FRAME WIDTH

[29]1 1/8"

[62]2 7/16"

Optional Factory Applied Wood Jamb Extensions

[113]4 7/16"

[16]

5/8"

[29]

1 1/

8"[5

4]2

1/8"

[20]13/16"

[59]2 5/16"

[167]6 9/16"

[116]4 9/16"

1 1/8"[54]

2 1/8"

[58]

2 1/

4"[1

6]5/

8"

FRAM

E H

EIG

HT

[79]

3 1/

16"

[83]3 1/4" OAW

LJLJ

VH

VS

LOCK JAMBLJ LOCK JAMBLJ

VS VENT SILL

VH VENT HEAD



250 Series Awning

Unit Sections - Block Frame

[79]

3 1/

8"

[16]5/8"

[49]1 15/16"

[65]2 9/16"

FRAME WIDTH

[83]3 1/4" OAW

[79]3 1/8"

[65]

2 9/

16"

[49]

1 15

/16"

[16]

5/8"

FRAM

E W

IDTH

[83]3 1/4"

[63]2 1/2"

[58]

2 1/

4"[1

6]5/

8"

FRAM

E H

EIG

HT

[79]

3 1/

16"

[83]3 1/4" OAW

FJ

FH

FS

FJ FIXED JAMB

FH FIXED HEAD

FS FIXED SILLVS VENT SILL

VH VENT HEAD

[83]

3 1/

4"

[20]13/16"

[59]2 5/16"

[79]3 1/16"

[63]

2 1/

2"

FRAME WIDTHFRAME WIDTH 1/2" [13]

TOTAL FRAME WIDTH

[170]6 11/16"

[143]5 5/8"

VIM LJLJ

VH

VS

LOCK JAMBLJLOCK JAMBLJ LOCK JAMBLJLOCK JAMBLJ

INTEGRAL MULLIONVERTICALVIM


Documents

Performance Glazing Performance Grille Pro≤les and ......Pella 2020 Architectural Design Manual Division 08 – Openings Windows and Doors V250-AW-1 250 Series Awning Performance