The Gamme S is a line design to suit the needs of the performed racing or cruising riggings. This line is results from the Sparcraft know-how and expertise known in the sailing throu- ghout the world for over 50 years. www.sparcraft.com < Wide range up to 80’ < Monohulls and Multihulls < High quality manufacturing < Optimized sections SPARCRAFT n We take the best mast section and the functio- nalities of each part to meet your specifica- tions. The S range thus takes into account the particularity of perfor- ming rigging : weight to inertia ratio, geometry or aerodynamics... Sparcraft brings the ulmost care to the rigs, from sections extrusion to the delivery : n European high quality alloys and a large requirement in the choice of materials n Quality control of the extrusions (twist & straightness) n Anodizing after machining and drilling n 5-axis machining (up to 22 meters) n Different mast head configurations available : - Mast head rig - Mast Rig with taper - Fractional rig - Fractional rig with taper - Different options : single or double external spi attachments n The type of spreader tip depends on the configuration of the rigging (continuous or discontinuous). Complete, or parts : - discontinuous or continuous tips; - Alloy through bars; - Spreader backing plates,… n The S range sections are designed to be suitable for cruising and race yachts for up to 75’ (multihulls) and 80’ (monohulls), and adapted for many different rig set-ups (mast head or fractional rig). HIGH QUALITY MANUFACTURING SECTIONS S - Performance MAST SECTIONS S Performance OPTIMISATION Photo : SAPA GROUP MAST HEADS SPREADERS SECTIONS & HARDWARE

Performance - Sparcraft · 2016-11-30 · The Gamme Sis a line design to suit the needs of the performed racing or cruising riggings. This line is results from the Sparcraft know-how

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

Page 1: Performance - Sparcraft · 2016-11-30 · The Gamme Sis a line design to suit the needs of the performed racing or cruising riggings. This line is results from the Sparcraft know-how

w w w . s p a r c r a f t . c o m

< Wide range up to 80’< Monohulls and Multihulls< High quality manufacturing< Optimized sections

SPARCRAFT

n�We take the best mastsection and the functio-nalities of each part tomeet your specifica-tions. The S range thustakes into account theparticularity of perfor-ming rigging : weight toinertia ratio, geometryor aerodynamics...

Sparcraft brings the ulmost care to therigs, from sections extrusion to thedelivery :

n�European high qua-lity alloys and a largerequirement in thechoice of materials

n�Quality control ofthe extrusions(twist & straightness)

n�Anodizing aftermachining and drilling

n�5-axis machining(up to 22 meters)

n�Different mast head configurations available :- Mast head rig- Mast Rig with taper- Fractional rig- Fractional rig with taper- Different options : single or double external spiattachments

n�The type of spreader tip depends on the configurationof the rigging (continuous or discontinuous).Complete, or parts :- discontinuous or continuous tips;- Alloy through bars;- Spreader backing plates,…

n�The S range sections are designed to besuitable for cruising and race yachts for upto 75’ (multihulls) and 80’(monohulls), and adapted formany different rig set-ups(mast head or fractionalrig).

HIGH QUALITY MANUFACTURING

SECTIO

NS S - Perform

ance

MAST SECTIONS SPerformance

O P T I M I S A T I ON

Phot

o : S

APA

GROU

MAST HEADS

SPREADERS