PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF

8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF

1/18

PERFORM Toolkit 3.1 ReleaseNotes

Reference: InTouch ID#

Version: 1.0

Release Date: 28-Mar-2014

EDMS UID: 1652317494

Produced: 28-Mar-2014 08:46:15

Owner: BGC Documentation

Author: Dong Yuan, Mohammad Khairi

Hamzah, Francesca Kovacic

Private Release Notes, PERFORM Toolkit, PTK

Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.


2/18

/ Legal Information

Legal Information

Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.

This work contains the confidential and proprietary trade secrets of Schlumbergerand may not be copied or stored in an information retrieval system, transferred,

used, distributed, translated or retransmitted in any form or by any means,

electronic or mechanical, in whole or in part, without the express written

permission of the copyright owner.

Trademarks & Service marks

Schlumberger, the Schlumberger logotype, and other words or symbols used

to identify the products and services described herein are either trademarks,

trade names or service marks of Schlumberger and its licensors, or are the

property of their respective owners. These marks may not be copied, imitatedor used, in whole or in part, without the express prior written permission of

Schlumberger. In addition, covers, page headers, custom graphics, icons, and

other design elements may be service marks, trademarks, and/or trade dress

of Schlumberger, and may not be copied, imitated, or used, in whole or in part,

without the express prior written permission of Schlumberger.

A complete list of Schlumberger marks may be viewed at the Schlumberger

Oilfield Services Marks page: http://markslist.slb.com

Private

Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC

Documentation\DongYuan,

MohammadKhairiHamzah

,FrancescaKovaci

c\InTouchID#\1

.0\ReleaseDate:28-M

ar-2014\EDMSUID:1652317494\Produced

:28-M

ar-201408:46:15
http://markslist.slb.com/http://markslist.slb.com/


3/18

/ Document Control

Document Control

Owner: BGC Documentation

[email protected]

Author: Dong Yuan, Mohammad Khairi Hamzah, Francesca Kovacic

Reviewer: Dong Yuan

Approver: Dario Molteni

Contact Information

Name: BGC Documentation

Address: Schlumberger Technologies (Beijing) Ltd.

Schlumberger Beijing GeoScience Center

9th Floor, ChuangXin Building

Tsinghua Science Park

Beijing 100084, CHINA

Phone: +86 10 6061 5800

Email: [email protected] Alias: bgc-documentation

Revision History

Version Date Description Prepared by

1.0 28-Mar- 2014 First version for PTK 3.1 commercial release. Author: Mohammad Khairi

Hamzah, Francesca Kovacic

Reviewer:Dong Yuan

Private




,FrancescaKovaci

c\InTouchID#\1

.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


4/18

iv / Table of Contents iv

Table of Contents

1 Introduction ______________________________________________________ 1

1.1 Disclaimer of Warranty _________________________________________ 1

1.2 Purpose _______________________________________________________ 1

1.3 Scope _________________________________________________________ 1

1.4 Definitions, Acronyms, and Abbreviations ________________________ 2

1.5 References ____________________________________________________ 2

1.6 Overview ______________________________________________________ 2

2 About This Release ______________________________________________ 3

3 Software License _________________________________________________ 4

4 Compatible Products _____________________________________________ 5

5 Upgrades ________________________________________________________ 6

6 New Features ____________________________________________________ 7

7 Known Issues ____________________________________________________ 8

7.1 Outstanding SMRs _____________________________________________ 8

7.2 Known Issues _________________________________________________ 8

7.2.1 General ____________________________________________________ 8

7.2.2 Gang Time/Depth Plot ______________________________________ 8

7.2.3 Synchronized Log __________________________________________ 9

7.2.4 Hydraulics _________________________________________________ 9

7.2.5 Rig State __________________________________________________ 9

7.2.6 Wellbore Geometry _________________________________________ 9

7.2.7 Plotting Plan Survey and Actual Survey on a Depth Cross Plot 9

7.2.8 DMM Wellbore Curvature Estimate (Bending) Computation ___ 9

7.2.9 Partial Underreamer/Hole opener support ___________________ 10

7.2.10 Sidetrack Wizard sequencing logic _________________________ 10

7.2.11 Hydraulic Computation Performance ________________________ 10

7.2.12 Actual Survey Update ______________________________________ 107.2.13 Annotations _______________________________________________ 11

7.2.14 Importing/Exporting Issues DOX Related __________________ 11

7.2.15 Log Printing _______________________________________________ 11

7.2.16 Non-English Local Setting __________________________________ 11

7.2.17 Problem with Running PTK Software Without Administrator

Privilege __________________________________________________ 12

7.2.18 Project Size _______________________________________________ 12

Private

Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.B

GC



,FrancescaKovacic\InTouchID#\1

.0\ReleaseDate:28-M

ar-20

14\EDMSUID:1652317494\Produced:2

8-M

ar-201408:46:15


5/18

v / Table of Contents v

7.2.19 Project Storage ___________________________________________ 12

7.2.20 PTK Data Source __________________________________________ 12

7.2.21 Channel Names and Mapping ______________________________ 12

7.2.22 Tool Decoder Requires Specific Patch Version of

MSVSR80.dll ______________________________________________ 13

7.2.23 Source of Out-of-Memory Issue on the Time vs. Depth Plot __ 137.2.24 Non-supported Features ___________________________________ 13

Private

Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.B

GC




.0\ReleaseDate:28-M

ar-20

14\EDMSUID:1652317494\Produced:2

8-M

ar-201408:46:15


6/18

1 / Introduction 1

1 IntroductionRelease Notes,PERFORM Toolkit, PTK

1.1 Disclaimer of Warranty

Schlumberger makes no representations or warranties, either expressed or

implied, by or with respect to anything in this document, and shall not be liable

for any implied warranties of merchantability orfitness for a particular purpose or

for any indirect, special or consequential damages.

Copyright 2010, Schlumberger.

All rights reserved.

GOVERNMENT RIGHTS LEGEND: Use, duplication or disclosure by the U.S.

Government is subject to restrictions set forth in the applicable Schlumberger

license agreement and as provided in DFARS 227.7202-1(a) and 227.7202-3(a)

(1995), DFARS 252.227-7013(c)(1)(ii) (Oct 1988), FAR 12.212(a) (1995), FAR

52.227-19, or FAR 52.227-14, as applicable.

"Schlumberger" and Schlumbergers products are trademarks of Schlumberger.

References to other companies and their products use trademarks owned by the

respective companies and are for reference purpose only.

1.2 Purpose

The purpose of the Release Notes document is to communicate major new

features and enhancements in this release of PERFORM Toolkit 3.1. It also

documents known issues and workarounds. This document is for internal

commercialization purpose only. Each segment should prepare its own external

version of release notes.

1.3 ScopePERFORM Toolkit is an application to allow drilling engineers, drilling

optimization specialists and OSC engineers to perform pre-job analysis, real-time

execution optimization and post-job evaluation. Using these applications, drilling

data can be analyzed in real time or post job for better operation efficiency and

better service quality.

Private





.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


7/18

2 / Introduction 2

1.4 Definitions, Acronyms, and Abbreviations

DF Defined Function

DLS Dog Leg Severity

DMM Drilling Mechanics Module

OSC Operation Supporting Center

PTK PERFORM Toolkit

ROPO ROP Optimization Computation Module

RTDS Real-time Drilling Services

SMR Software Modification Request

WDP Wired Drill Pipe

1.5 References

N/A

1.6 OverviewThis document has a brief introduction to the application features in PTK

3.1. It explains the licensing mechanism and the target application users. A

section on product compatibility covers the applications being verified against

PTK 3.1 during product development and testing. The specific new features

and enhancements of PTK 3.1 are identified. Known issues are listed and

workarounds are described if they are available.

Private




,FrancescaKovaci

c\InTouchID#\1

.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


8/18

3 / About This Release 3

2 About This ReleaseRelease Notes,PERFORM Toolkit, PTK

This release covers PERFORM Toolkit for D&M/IPM. As an internal product, PTK

is licensed through LDAP or dongle based license to Schlumberger employees

including Smith/MI/GeoServices/Extreme Engineering. For details about how to

obtain a license, see Chapter3: Software License.

PTK 3.1 is the commercial release after 3.0. The major objective of this release

is to present the new features and workflows available (listed in Chapter6: New

Features).

Private





.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


9/18

4 / Software License 4

3 Software LicenseRelease Notes,PERFORM Toolkit, PTK

You must have access to a license file on a server, have a local license and

dongle or use an LDAP record to be able to run PERFORM Toolkit. The software

is licensed in three ways:

Active Directory Licensing, for Schlumberger internal users who will access

the application from company-issued computers using an LDAP record,

either their own or one from a Role Account LDAP record.

Schlumberger Server Based Dongle Licensing, for Schlumberger internal

users working on shared computers or workstations, such as in an OSC and

where a server-based dongle license is installed and available.

Schlumberger Individual Dongle Licensing, for internal users withnon-standard computers or who cannot connect directly to the Schlumberger

network such as from a clients office.

Please refer to the Installing and Setting Up License chapter in PTK 3.1

Installation Guide for further information.

Private




,FrancescaKovaci

c\InTouchID#\1

.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


10/18

5 / Compatible Products 5

4 Compatible ProductsRelease Notes,PERFORM Toolkit, PTK

This product has been tested with DOX 2.7 update and DOX 2.8.

PTK does not support the following BHA components to be used in Hydraulics

and Torque and Drag computation:

Turbine (only supported in BHA Builder)

Aluminum Drill Pipe

Private





.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


11/18

6 / Upgrades 6

5 UpgradesRelease Notes,PERFORM Toolkit, PTK

PTK 3.1 can coexist with the previously released PTK 2.1 and 3.0.

Private




,FrancescaKovaci

c\InTouchID#\1

.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


12/18

7 / New Features 7

6 New FeaturesRelease Notes,PERFORM Toolkit, PTK

The following new features are part of PTK 3.1:

SPIN workflow which enables you to monitor the stuck pipe tendencies. The

software computes the actual friction factor of the borehole and allows you to

monitor the changes throughout the drilling operations.

Three features are provided to aid stuck pipe monitoring:

SPIN Plots

SPIN Alarm Panel

SPIN Advanced Numeric Gauge

Three new Defined Functions to be used mainly with DMM downhole

measurements as inputs

DMM Tool Curvature

Plugged Nozzle Detector

Underreamer weight and torque

DMM Wellbore Curvature Estimate workflow in the Torque and Drag

engine to derive an estimate of the borehole curvature from the real-time

DMM bending moment measurement

Support Proximity workflow which enables you to publish the work done inPTK such as computations and observations.

Private





.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


13/18

8 / Known Issues 8

7 Known IssuesRelease Notes,PERFORM Toolkit, PTK

7.1 Outstanding SMRs

PTK SMRs are recorded into SWIFT (http://swift.slb.com ). You can query the

outstanding SMRs to know the product development status.

Product Line: Drilling & Measurement

Product Name: PTK (2.1, 3.0, and 3.1)

7.2 Known Issues

7.2.1 General

Plots

After you reopen a project, the vertical depth plots might display on a horizontal

view.

Workaround: Right-click in the log window, and then click Change Index to

Verticalfor the vertical view.

7.2.2 Gang Time/Depth Plot

Once you create the plots and want to re-assign the data, you need to close

and reopen the window because the dialog box will not be available any more.

The available time gang plots to you are:

Time cross plot.

Time vs. depth plot.

The available depth gang plots to you are: Depth cross plot.

Broomstick plot.

Private




,FrancescaKovaci

c\InTouchID#\1

.0\ReleaseDate:28-M


:28-M

ar-201408:46:15
http://swift.slb.com/http://swift.slb.com/


14/18

9 / Known Issues 9

7.2.3 Synchronized Log

The Position of the red line of the depth log in the synchronized log sometimes

will not synchronize with the time data.

7.2.4 Hydraulics

Hydraulic Model cannot handle Reamer while Drilling (RWD) BHA.

7.2.5 Rig State

Rig State will not compute continuously if you use CRPM as source of rotation

especially during tripping out or tripping in. Rig State will start to compute when

rotation is detected after the trip activity.

7.2.6 Wellbore Geometry

When you change OD or ID of an activity in the Wellbore Geometry, clicking the

Activity will produce an exception which would not affect PTK.

7.2.7 Plotting Plan Survey and Actual Survey on a DepthCross Plot

If the plan surveys are plotted together with the actual survey on the same axis

and you change the depth interval, the position of the two lines might switch.

7.2.8 DMM Wellbore Curvature Estimate (Bending)Computation

The software does not compute the Wellbore Curvature Estimate when the build

rate is 0.5 deg/100 ft and when the bending moment measurement is below

the model bending moment at 0 deg/100 ft. This is to ensure that the algorithm

outputs a high confidence estimation.

Private





.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


15/18

10 / Known Issues 10

7.2.9 Partial Underreamer/Hole opener support

PTK 3.1 supports the underreamer/borehole opener component computation in

the TAD and DMM Wellbore Curvature Estimate features. The computations

mentioned simulates the wellbore geometry with dual hole size (bit hole size from

bit to underreamer/hole opener and underreamer/hole opener cutter size to last

casing depth) during on-bottom drilling.

The software uses the Max Drill Hole Diameter parameter, which you input in

the BHA Editor, in the computation for the hole size above the underreamer or

holeopener BHA component.

The Tripping Load Analysis (TLA) and RT Hydraulics do not utilize the dual

hole size.

7.2.10 Sidetrack Wizard sequencing logic

The sidetrack wizard feature logic has been identified through the user Software

Modification Report (SMR) to not fully meet the user requirements. The issue

is not addressed in PTK 3.1.

7.2.11 Hydraulic Computation Performance

The fix in the logic of the hydraulics computation in PTK 3.1 has impacted the

computation speed.

The historical hydraulics computation takes a longer time in PTK 3.1 compared

to PTK 3.0 but produces more accurate results.

7.2.12 Actual Survey Update

PTK is not designed for complex survey management. When survey points from

a real-time data source come in PTK, they will be the same as the server ones

and you will not be able to make changes during the data streaming.

In offline mode you will be able to edit existing survey or create a new one. When

you re-establish the real-time connection, any survey at a deeper depth than

the existing ones will be appended and any survey at a shallower depth will be

discarded. This means that if you had made any changes, these will be retained.

Private




,FrancescaKovaci

c\InTouchID#\1

.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


16/18


7.2.13 Annotations

The position of the plot annotations is not associated with the indexes or

values on the plots. This means that when you change the unit system, the

locations of the annotations will not change, even if the indexes are updated

to the new units.

The annotations text will not be visible when you print a log with MaxWell

header.

7.2.14 Importing/Exporting Issues DOX Related

When you import an ASCII format survey file into Drilling Office X 2.8, the

software will only take the first 3 columns in the following order: MD, inclination

and azimuth.

If you want to export the survey data to a CSV file from PTK for DOX 2.8 to

import it, please select Inclination as the first channel and Azimuth as the

second channel in the Select Channels dialog box.

7.2.15 Log Printing

When the AutoFitWidthcheck box is selected, and if there are many tracks in

the log, the index track may become too narrow, and the index number cannot

be printed out. To solve the problem, before printing, please make the indextrack wide enough to show the index number. For details about how to make

a track wider, please refer to To set the properties for a trackin section 12.3

Configuring Tracks in PTK Online Help.

7.2.16 Non-English Local Setting

PTK will not work properly in non-English local setting. Some features may not

work well and the Changepoint Detector is one of them. Please check Start>

Control Panel >Region and Language Options with Win 7.

Private





.0\ReleaseDate:28-M


:28-M

ar-201408:46:15


17/18


7.2.17 Problem with Running PTK Software WithoutAdministrator Privilege

PTK has to be installed and ran with administrator privilege, otherwise there willnot be full access to product files. Refer toInTouch Content ID 4227785for

information on how to handle the access right error.

7.2.18 Project Size

Some data files may not be cleaned and this causes the project folder size to

increase. It is suggested to run the fi le cleaner utility to reduce the project size.

7.2.19 Project StoragePTK stability issues can occur when you store the PTK project on the server

rather than the local drive. Refer to InTouch SQ Alert 001for more information.

7.2.20 PTK Data Source

The data source that is transmitting data to InterACT should not publish a

comment/text with &, which is a WITSML reserved character, otherwise the

download will not succeed.

7.2.21 Channel Names and Mapping

When a custom channel is published from PTK to InterACT, the maximum

number of characters for the channel name is limited to 32. If the length

exceeds the limit, the channel will not be published.

For a channel to be displayed in PTK, the maximum number of characters

for the channel name has to be less than 45. Please do not exceed this limit

when you do channel mapping, otherwise the channel will not be created in

the system.

If a channel is not defined in the PTK channel preference list, the channel

name will be by default set to the channel code. Typical examples are the

ROPO output channels which originally have descriptive names but these

are then overridden to channel code when written to PTK.

Private




,FrancescaKovaci

c\InTouchID#\1

.0\ReleaseDate:28-M


:28-M

ar-201408:46:15
http://intouchsupport.com/index.cfm?event=content.preview&contentId=4227785http://intouchsupport.com/index.cfm?event=content.preview&contentId=6228807http://intouchsupport.com/index.cfm?event=content.preview&contentId=6228807http://intouchsupport.com/index.cfm?event=content.preview&contentId=4227785


18/18


7.2.22 Tool Decoder Requires Specific Patch Version ofMSVSR80.dll

If your PC security check (S) is green, this patch has been automaticallyinstalled with MS windows patch, otherwise, you need to install the patch

manually at http://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=

ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http%3a%2f%

2fdownload.microsoft.com%2fdownload%2f8%2fB%2f4%2f8B42259F-5D70-4

3F4-AC2E-4B208FD8D66A%2fvcredist_x86.EXE

7.2.23 Source of Out-of-Memory Issue on the Time vs.Depth Plot

Refer toInTouch Content ID 5874948. The third party cross plot control in PTKhas a memory leak bug when PTK is showing the graphics objects representing

activities on the plot. Currently there is no workaround for this issue.

7.2.24 Non-supported Features

The DDC Service Provider (Start>Schlumberger> PERFORM Toolkit 3.0

>DDC Service Provider) is not available for PTK 3.1.

The MOC feature is no longer supported by PTK 3.1.

Some new BHA properties are not available in PTK such as:

Wearbands

Rotating bending limit moment

Non-Schlumberger motor parameters

Private

Copyright 2014 Schlumberger Unpublished Work All rights reservedGC




.0\ReleaseDate:28-M


:28-M

ar-201408:46:15
http://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://intouchsupport.com/intouch/methodinvokerpage.cfm?caseid=5874948http://intouchsupport.com/intouch/methodinvokerpage.cfm?caseid=5874948http://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXE

Documents

PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF