Upload
ruud-veerman
View
93
Download
3
Embed Size (px)
Citation preview
THE MICROGRINDING SPECIALIST
History
• Founded ca. 1825, in Amsterdam
• Since 1997 located in Olst
Looiersgracht, Amsterdam
Peppink facility
• Research, development and production location
• Multidisciplinairy machinebuilding facility
Machinefabriek G.R. Veerman, Olst
Wide range of applications
• Inhouse engineering department
• 3d drawingprogram
• Cad-cam
Specialised in crossbeater mills Peppink type AN - From laboratory to production mill. - Available in castiron or stainless steel. - Up to very fine grinds down to 50um. - Extremely suitable for controlled microgrinding.
Peppink type W - Widened grindchamber compared to the Peppink AN grinder. - Available in castiron or stainless steel. - Higher capacity than the AN grinders. - Option: ATEX norm for dust explosion risk products.
Peppink type M - Very suitable for grinding of high viscosity products - Durable construction, crushplates in grindercap. - High capacity, less suitable for very fine grinds. - Due to the low built-in height, very suitable to integrate in existing systems.
We also supply Hammergrinders, pingrinders and rollerbreakers
AN mills
• 100 AN - Laboratory mill - Mill housing Ø100x40mm - Crossbeater- pingrinder - Castiron or stainless steel 316 - Power 0,55kW - Revolution 10.000 rpm
• 200 AN - Laboratory- and small
productionmill - Mill housing Ø200x32mm - Castiron or stainless steel 316 - Power 2,2kW - Revolutions 3000 – 7000 rpm
AN mills
• 100 AN - Laboratory mill - Mill housing Ø100x40mm - Crossbeater- pingrinder - Castiron or stainless steel 316 - Power 0,55kW - Revolutions 10.000 rpm
• 200 AN - Laboratory- and small
production mill - Mill housing Ø200x32mm - Castiron or stainless steel 316 - Power 2,2kW - Revolutions 3000 – 7000 rpm
AN mills
• 300 AN - Productionmill
- Millhousing Ø300x42mm
- Crossbeater with 6 or 12 arms
possible with wearcams
- Power 5,5 to 11 kW
- Revolutions 1400 – 5000rpm
• 550 AN - Productionmill
- Millhousing Ø550x97mm
- Crossbeater 6, 12 or 24 arms
possible with wearcams
- Power 18,5 to 22 kW
- Revolutions 500 – 5000rpm
AN mills
• 300 AN - Productionmill - Millhousing Ø300x42mm - Crossbeater 6 or 12 arms possible with wearcams - Power 5,5 to11 kW - Revolutions 1400 – 5000rpm
• 550 AN - Productionmill - Millhousing Ø550x97mm - Crossbeater 6, 12 or 24 arms possible with wearcams - Power 18,5 to 22 kW - Revolutions 500 – 5000rpm
W mills
• 400 W - Mill housing Ø400x200mm
- Crossbeater 12 arms
possible with wearcams
- Power 11 kW
- Revolutions to max. 6000rpm
• 600 W - maalkamer Ø600x200mm
- slagkruis 12 armen
evt. met slijtnokken
- vermogen 18,5 - 45 kW
- toerental tot max. 4000rpm
W mills
• 400 W - Grinder house Ø400x200mm
- Crossbeater with 12 arms
possible with wearcams
- Power 11 kW
- Revolutions up to max. 6000rpm
• 600 W - Mill housing Ø600x200mm
- Crossbeater 12 arms
possible with wearcams
- Power 18,5 - 45 kW
- Revolutions to max. 4000rpm
W mills
• 600 W+ - Client special
- Extra deep milling house
- Cross beater with 16 arms
- 2 barg internal pressure (PED)
- Power 45 kW
Clientspecials
• Complete installations
• Adapted mills to client specs
• PLC controlled systems
• Simple Plug and Play systems
- 300 AN direct drive
- Dosing unit with moving tray prevents jams
- Selfcleaning filterbox
- Levelmeasure in bunker
- Automated by PLC controls
Complete installations
Milling for testpurposes
- Inhouse testmill
- Insight in extensive testresults
- Rental mills
- Testing on location
Customers
Akzo Nobel Chemicals BV
Koninklijk Euroma BV
Limagrain Nederland BV
BLGG ArgoXpertus
Huybregts Groep
Nestle Nederland BV
Norit Nederland BV
Dutch Cocoa BV
Koninklijk de Ruyter BV
Heineken Nederland BV
Rubia Natuurlijke Kleurstoffen
Wageningen UR, ESG
Van Tongeren Kennemer BV
Duyvis Wiener BV
Products
Coconut Lactose Soja beans Cocoa beans Dried grass Bamboo Chalkpellets Borax Various herbs Nutmeg Peppers Dried paprika Coriander Vanilla sticks Dyes Plastics
Why Peppink
- Design and production in house
- Minimal wear and tear, low maintenance
- Proven technology
- Standard and specials
- Solution driven
THE MICROGRINDING SPECIALIST