Penstocks - Figure 980 to 984 200 x 200 - 3000 x 3000mmcrewnsw.com/wp-content/uploads/2016/11/Penstock-Brochure-Nov-20… · Penstocks - Figure 980 to 984 200 x 200 - 3000 x 3000mm

Penstocks - Figure 980 to 984 200 x 200 - 3000 x 3000mm

Features

• The Penstock range is anengineered to order product andavailable in a variety ofconfigurations:– upward opening– downward opening (Weir)– square or rectangular opening

• Constructed from corrosionresistant materials:– Frame & Gate: 316 S/S, marinegrade aluminium or super duplex

• Designed for on-off or modulatingbi-directional sealing, usingUHMWPE or Ertalyte® as abearing/guide material to reducethe operating torque.

• Seals on three or four facesthroughout the opening andclosing stroke.

• Specially designed sealing profile(lip seal) allows for a leakage rateof less than 0.1 litres per minuteper metre of seal perimeter.

• Rising and non-rising spindleoptions.

• Actuator options include manual,electric, pneumatic and hydraulic.

• Easy installation and maintenancefree operation.

Technical data

Size:200 x 200 to 3000 x 3000mmPressure:Up to 10m.Greater head and sizes available onrequest.Connections:Wall, channel or embedded.

Crew NSW Penstocks and Stopboards are used for the isolation and control of water, wastewater, stormwater, drainage, water level and spillways.

Flow Control

www.crewnsw.com

www.crewnsw.com Ph: 02 4421 2174 Mobile: 0456 360 992

User

Highlight


Features

1. Actuation Choice of manual, electric, pneumatic or hydraulic.

2. Thrust bridge Robust design, allows for easy retro-fitting of actuation.

3. Construction 316/316L S/S, Marine grade aluminium, Super duplex.

4. Spindle Rising & Non-Rising Allows for easy assembly and disassembly.

5. Guides & Sealing Seals on three or four faces depending on model type, guided through the opening and closing

stroke, ideal for modulating applications.

6. On and off seating Bi-directional seal ensures positive seating.

7. Bottom seal Flush inverted seal, prevents dirt build-up, positive sealing.

1

2

3

4

5

6

7

1

2

3

4

5

67

F980 F980 PRO


A. Wall/Face optionThis is the most common way of installation. Therefore, we provide for frame drillholes. Mounting studs and lock nuts are provided.

B. Wall/Side optionMounting studs and lock nuts are provided.

C. Embedded recess optionFor installation into (precast) block out.

D. Other options• Thimble mounted Penstock.• Flange mounted Penstock.• Direct on Steel pit/basin Penstock/Stopboard mounted.• Double gate or board in single frame.


Mounting options

We offer a number of mountingoptions. Generally sealing betweenthe frame and concrete structure willbe achieved by fast setting non-shrink grout.

F980 F980 PRO


Design

Material

Opening

Operation

Head

F980316 Stainless Steel300x300 to 3000x3000Head: up to 10m

F980 PRO316 Stainless Steel200x200 to 1200x1200Head: up to 6m

F981Marine grade Aluminium200x200 to 1200x1200Head: up to 6m

F983Marine grade Aluminium300x300 to 3000x3000Head: up to 3m*

• A fabricated robust framemade of U-profile stainlesssteel sections.• Low friction gate guides and lipseal mechanically fixed inframe.• Design suitable for On and Offsealing head (Bi-directional).• Leakage rate less than 0.1litres per minute per metre ofseal perimeter.• Gate fabricated in one piecewith sufficient ribs andstiffeners to resist in serviceload under maximumunbalanced head.

• A fabricated frame made ofrolled stainless steel sectionsresistant to torsion.• Low friction gate guidesinserted into frame.• Double lip seal clamped intoframe.• Design suitable for On and Offsealing head (Bi-directional).• Leakage rate less than 0.1litres per minute per metre ofseal perimeter.• Gate fabricated in one piecewith sufficient ribs andstiffeners to resist in serviceload under maximumunbalanced head.

• A fabricated frame fromexclusively extruded marinegrade aluminium.• Low friction gate guides and lipseal mechanically fixed inframe.• Design suitable for On and Offsealing head (Bi-directional).• Leakage rate less than 0.1litres per minute per metre ofseal perimeter.• Gate fabricated in one piecewith sufficient ribs andstiffeners to resist in serviceload under maximumunbalanced head.

• A fabricated frame fromexclusively extruded marinegrade aluminium to acceptunique seal. Robustconstruction to accommodateinstallation and operationwithout flexing or distortion.• Design suitable for On and Offsealing head (Bi-directional).• Leakage rate less than 0.1litres per minute per metre ofseal perimeter.• Gate fabricated in one piecewith sufficient ribs andstiffeners to resist in serviceload under maximumunbalanced head.

Frame and Gate:316/316L Stainless Steelor Super Duplex Seal: EPDM or NeopreneUHMWPE

Frame and Gate:316/316L Stainless Steel Seal: Neoprene/Ertalyte®

Frame and Gate:Marine grade AluminiumFrame: grade 6061 T6Gate: grade 5083 H321Seal: EPDM or NeopreneUHMWPE

Frame and Gate:Marine grade AluminiumFrame: grade 6061 T6Gate: grade 5083 H321Seal: Neoprene

4 sides sealedHead: up to 10m*On and Off seating


4 sides sealedHead: up to 6mOn and Off seating


Square or rectangular300x300 up to 3000x3000**




Spindle:Rising or Non-risingManual operatedelectric, pneumatic or hydraulic




Penstocks - Figure 980 to 984 Upward Opening


Penstocks - Figure 980 to 984 Downward Opening - Weir

F903/31





F980W316 Stainless Steel300x300 to 3000x3000Head: up to 10m

F980W PRO316 Stainless Steel200x200 to 1200x1200Head: up to 6m

F980W4316 Stainless Steel300x300 to 3000x3000Head: up to 10m

F980W4 PRO316 Stainless Steel200x200 to 1200x1200Head: up to 6m





Frame and Gate:316/316L Stainless Steel orSuper Duplex Seal: EPDM or Neoprene UHMWPE

Frame and Gate:316/316L Stainless SteelSeal: Neoprene/Ertalyte®

Frame and Gate:316/316L Stainless Steel orSuper Duplex Seal: EPDM or NeopreneUHMWPE

Frame and Gate:316/316L Stainless SteelSeal: Neoprene/Ertalyte®


3 sides sealedHead: up to 1.5m*On and Off seating


4 sides sealedHead: up to 1.5m*On and Off seating





Design

Material

Opening

Operation

Head


Penstocks - Figure 982 to 984 Stopboards & Stoplogs

316 Stainless Steel200x200 up to 1200x1200*

316 Stainless SteelBoard: Marine grade Aluminium200x200 to 1200x1200*

Marine grade Aluminium200x200 to 1200x1200*

F982SSL

F984SSL F984SAL F984

F982SAL F982

Design

Material

Opening

• A fabricated frame made of rolled stainlesssteel sections.• Low friction gate guides and double lip sealinserted into frame.• Design suitable for On and Off sealing head(Bi-directional).

Stop Gate model F982 SSL:• Single board fabricated from materialstainless steel with sufficient ribs andstiffeners to resist in service load undermaximum unbalanced head.• Handles or lifting pins welded on the gate.

Stoplogs model F984 SSL:• Multiple boards fabricated from materialstainless steel with sufficient ribs andstiffeners to resist in service load undermaximum unbalanced head.• Each board furnished with handles or liftingpins.

• A fabricated frame made of rolled stainlesssteel sections.• Low friction gate guides and double lip sealinserted into frame.• Design suitable for On and Off sealing head(Bi-directional).

Stop Gate model F982 SAL:• Single board fabricated from materialmarine grade aluminium with sufficient ribsand stiffeners to resist in service load undermaximum unbalanced head.• Handles or lifting pins welded on the gate.

Stoplogs model F984 SAL:• Multiple boards fabricated from materialmarine grade aluminium with sufficient ribsand stiffeners to resist in service load undermaximum unbalanced head.• Each board furnished with handles or liftingpins.

• Fabricated from extruded marine gradealuminium to accept unique seal. Frame isof a robust construction to accommodateinstallation and operation without flexing ordistortion.• Double lip seal inserted into frame.• Design suitable for On and Off sealing head(Bi-directional).

Stop Gate model F982:• Single board fabricated from materialmarine grade aluminium with sufficient ribsand stiffeners to resist in service load undermaximum unbalanced head.• Handles or lifting pins welded on the gate.

Stoplogs model F984:• Multiple boards fabricated from materialmarine grade aluminium with sufficient ribsand stiffeners to resist in service load undermaximum unbalanced head. Each boardfurnished with handles or lifting pins.

Frame and Gate:316 Stainless SteelSeal: Neoprene/UHMWPE

Frame: Stainless Steel grade 316Gate: Marine grade AluminiumSeal: Neoprene/UHMWPE

Frame and Gate:Marine grade AluminiumSeal: Neoprene

Square or rectangular200x200 up to 1200x1200*



Stoplogs - Multiple Boards

Stopboards - Single Board

* Larger sizes available on request.


Penstocks - Figure 980 to 984 Operating Options

Handwheel Spindle cap Bevel gearbox Electric actuator Pneumatic actuatorHydraulic actuator

M

Actuator Frame mounted

Pedestal options

More options

MountedPedestal frame

Wall mountedActuator bracket

MountedPedestal wall

MountedPedestal floorSpindle cap

Extension shaft

Operating level

Operating level

Outside of pitActuator mounted

Universal jointsActuator off set

Wall bracketActuator with

Outside of pitActuator mounted


Penstocks - Figure 980 to 984

Irrigation PenstockModel F983Irrigation infrastructure project.

Penstock Model F983 &Stopgate Model F982Penstocks and stopgates span 15M inopen channel.

Penstock Model F980 ProPenstocks four sides sealed, manualoperated furnished with torquelimitors.

Penstock Model F980Penstocks in open channel.


Penstocks - Figure 980 to 984 Enquiry Sheet

Penstock

Material:

o 316 Stainless steel o Marine grade Aluminium

Opening size:

W .................... mm wide x H .................... mm high

Head at Invert:

o On-seating .................... metre o Off-seating .................... metre

Head –Maximum water level at Invert of opening

Invert to operating level:

HO .................... metre

Operating level – Top of wall or operating floor level

Mounting:

Frame sides Invert

o Wall/Face mounted o Wall/Face mounted

o Wall/Side mounted o Floor mounted

o Embedded o Embedded

Spindle:

o Rising o Non-rising

Method of Actuation:

Manual: o Handwheel o Gear o T-Key

Actuated: o Electric actuator o Pneumatic

Other: Please specify

Stop Gate/Stoplogs

Material:

Frame: o 316 Stainless steel o Marine grade Aluminium

Gate: o 316 Stainless steel o Marine grade Aluminium

Opening size:

W .................... mm wide x H .................... mm Gate high

Frame height - FH .................... mm Wall height - WH .................... mm

Mounting:

Frame sides Invert

o Wall/Face mounted o Wall/Face mounted

o Wall/Side mounted o Floor mounted

o Embedded o Embedded

LevelOperating

Invert

LevelOperating

Invert

W

H

HO

W

H

HO

WHFH

H

W



Documents

Penstocks - Figure 980 to 984 200 x 200 - 3000 x 3000mmcrewnsw.com/wp-content/uploads/2016/11/Penstock-Brochure-Nov-20… · Penstocks - Figure 980 to 984 200 x 200 - 3000 x 3000mm