Upload
hoangxuyen
View
231
Download
9
Embed Size (px)
Citation preview
August -2017
Joint Action Plan for Statewide Harnessing of Water Resources Using Geo-Informatics
Developed for capturing the Assets of WRD from field and the location of water bodies,
rivers and nallas for value addition to the existing rich geo spatial database of water resources
in the vibrant state of Maharashtra. The exact location of Assets through the use of GPS, date
And time stamped photographs ensures the creation of a comprehensive database
Conceptualised , Designed, Developed By :
Dr. Subrata N. Das, Director, MRSAC
and
Mrs. Tutu Sengupta, Associate Scientist
Guardian Scientist – Water Resources, MRSAC
Developed and Supervised By:
Mrs. Sangita Rajankar, Associate Scientist , MRSAC
And in-charge software team
Programming and Integration By :
Mr. Shiran Ahmed and Mr. Mohammad Naved
Sr. RS and GIS Associate (Programmer), MRSAC
About JalShruti Mobile Application
JalShruti is created for Android smart mobile phones with OS version 4.1 and above
Data card preferably 3G or more
Internet connectivity should be available at the time of downloading the files beforeGoing to field
Internet should be available (3G) network when sending data
GPS facility available (preferably GLONASS)
Minimum 200 MB internal memory should be free which is required for installing the Application file (.apk)
Device memory of atleast 100 MB for storing the data
Installation procedure______________________________________________________________________________
Copy the Jalshruti.apk fileSelect the application from the .apk fileNow click on the check box and give installThe “Install Blocked” menu may come as the application is not through “Google Play Store”Click “Settings” in case the “Installed Blocked” screen appears
Uninstall the present version of JalShruti earlier versions, from your Android Phone. Also delete directory called JalShruti from file in mobile
The next screen would be the SIM card lock settingGo to the Security Option from the mobile and put “Make Unknown Sources”Check box “ON”
Installation procedure______________________________________________________________________________
In the “Security” screen click.Put the “Jal Shruti” application onClick “Install”
The Jal Shruti Application shall be installed an you get a notification for the same
Installation procedure______________________________________________________________________________
Once the application is installed the icon appears
Click on this to run the application.
Credits
Installation procedure______________________________________________________________________________
The new version (JalShruti ver 2.0) is provided with the registration process through provision of OTP (one time password) received on mobile as ‘message’
User has to “Enter Mobile number to get started”
Please enter “Name, Email, Mobile Number, Designation”.Please Enter “ Name in “ Title Case” e.g. Tutu SenguptaEmail – e.g. [email protected] - e.g. 9422134024 Designation in “Title Case” - e.g. Associate Scientist
Press “NEXT”A popup comes up saying “ Sit back & Relax! While we verify your mobile number”
Enter OTP (OTP is generated from MAHGOV site)Press submit
Note: The change in the registration has been done so that ONLY REGISTERED OFFICIALSuse this app. The entire list of the official is maintained in the server for authentication andhence, the details should be filled with utmost care. The basic user information aredisplayed at the top of the screen in the modules. If the user logs out, the process of loginin has to be repeated.
Create Login Procedure______________________________________________________________________________
Phone setting should not be changed for taking images
Download Manager (For Dam, Water Bodies, Canal, River, K.T.Wier, LIS, Office Mapping)____________________________________________________________________________
Select District
Download Project
Save File
Select from drop down
Global Positioning System Guidelines____________________________________________________________________________
Put the ‘GPS’ or ‘Location’ ‘ON’ from the mobile phone dashboard
For the first reading the GPS takes time to give exact position and accuracy.Please slightly change the position to get better accuracy. The value shouldBe between 1 -10 m
Select the district from the Drop down where the official wishes to go for data collection.
Dam Location Mapping____________________________________________________________________________
District
Dam Project Name
Project Id (Automatically from ejalseva – MIS)
Corporation Name (Automatically from ejalseva – MIS)
Region Name(Automatically from ejalseva – MIS)
Circle Name (Automatically from ejalseva – MIS)
Division Name (Automatically from ejalseva – MIS)
Other Component DetailsComponent Name
Component Id (Automatically from ejalseva – MIS)
Component type (Automatically from ejalseva – MIS)
CAPTURE PHOTO
Longitude (x axis) Automatically from GPS
Latitude (y axis) Automatically from GPS
Accuracy (m) Automatically from GPS
Date / Time Automatically from GPS
Care should be taken so that the accuracy which is Actually the deviation from location, should be As small as possible
GET POSITION
Click on camera to take photo
View Photograph
If photo is not proper click on
Take photo again
Remark To be filled in case of data discrepancy/ any other important information
Provisionfor taking5 photoshas beenprovidedfor thismodule
Select from drop down
Apply filter forDam , so that only damdata is shown from component
file.
K.T. Weir Mapping______________________________________________________________________________
District
Dam Project Name
Project Id (Automatically from ejalseva – MIS)
Corporation Name (Automatically from ejalseva – MIS)
Region Name(Automatically from ejalseva – MIS)
Circle Name (Automatically from ejalseva – MIS)
Division Name (Automatically from ejalseva – MIS)
Other Component DetailsComponent Name:
Component Id (Automatically from ejalseva – MIS)
K.T. Weir Attributes
Height of KT Weir
Maximum No. of Needles Enter Number
No. of Needles Placed Enter Number
Date of PlacementEnter Date indd/mm/yyyy format
No. of Needles Removed Enter Number
Date of Removal Enter Date indd/mm/yyyy format
Component type (Automatically from ejalseva – MIS)
Select from drop down
Apply filter so thatKTW is displayed
CAPTURE PHOTO
Longitude (x axis) Automatically from GPS
Latitude (y axis) Automatically from GPS
Accuracy (m) Automatically from GPS
Date / Time Automatically from GPS
Care should be taken so that the accuracy which is Actually the deviation from location, should be As small as possible
GET POSITION
Click on camera to take photoView Photograph
If photo is not proper click on
Remark To be filled in case of data discrepancy/ any other important information
K.T. Weir Mapping_____________________________________________________________________________
Take photo again
In case of K.T.WeirPhotograph is to be taken twice:1. For needle insertion2. For needle removal
All fields Need to be filled
Do not leave any field blank. Data shall not be displayed even though it is captured
District
Project Name
Project Id (Automatically from ejalseva – MIS)
Corporation Name (Automatically from ejalseva – MIS)
Region Name(Automatically from ejalseva – MIS)
Circle Name (Automatically from ejalseva – MIS)
Division Name (Automatically from ejalseva – MIS)
Canal DetailsComponent Name – Apply filter for DAM and LIS
Component Id (Automatically from ejalseva – MIS)
Component type (Automatically from ejalseva – MIS)
CAPTURE PHOTO
Longitude (x axis) Automatically from GPS
Latitude (y axis) Automatically from GPS
Accuracy (m) Automatically from GPS
Date / Time Automatically from GPS
Care should be taken so that the accuracy which is Actually the deviation from location, should be As small as possible
GET POSITION
Click on camera to take photoView Photograph
If photo is not proper click on
Take photo again
Remark To be filled in case of data discrepancy/ any other important information
Canal Attributes
Canal Mapping______________________________________________________________________________
Select from drop down
Canal Mapping______________________________________________________________________________
Canal Attributes:
Name of Canal: To be entered by user
Type of Canal: Main canal, LBC, RBC, Branch Canal, Distributory, Major, Minor, Sub Minor, Lateral Sub Lateral, End Lateral, Tail Minor, Tail Sub-Minor,Others
Status:Incomplete, Complete
Hydro structures/ Assets on canal:Spillway, Gated Spillway, Head Regultor, Bridge,Other Bridges, Cross Regulator, Direct Outlet, SuperPassage, Storage tank, Fall, Chute, Abutment, Culvert,Energy Dissipator, Escape, SWF, CTF, V-Notch,Rectangular Notch, Trapezoidal Notch/ Cipoletti WeirSyphon, ICPO, Level Crossing, CR-cum-Escape,Syphon aqueduct, Direct pipe outlet, Trench, None,Others
At each location of hydro structure, the position has to be taken so also the photograph
Select from drop down
Select from drop down
Select from drop down
Enter local name in title case like Bembla RBC
LIS Mapping______________________________________________________________________________
District
Project Name
Project Id (Automatically from ejalseva – MIS)
Corporation Name (Automatically from ejalseva – MIS)
Region Name(Automatically from ejalseva – MIS)
Circle Name (Automatically from ejalseva – MIS)
Division Name (Automatically from ejalseva – MIS)
Component DetailsComponent Name:
Component Id (Automatically from ejalseva – MIS)
Component type (Automatically from ejalseva – MIS)
Other Details Contd.,
Stage (Rising Main, Pump House, LBC, RBC, Distributory,Branch, Minor, Sub Minor, Feeder, Others, Escape on main canal, Approach, Distributed Channel, Manifold, Switch Yard, Delivery Chamber)
Longitude (x axis) Automatically from GPS
Latitude (y axis) Automatically from GPS
Accuracy (m) Automatically from GPS
Date / Time Automatically from GPS
Care should be taken so that the accuracy which is Actually the deviation from location, should be As small as possible
GET POSITION
Apply filter only LIS from Component id file
CAPTURE PHOTOClick on camera to take photo
View Photograph
If photo is not proper click on
Remark To be filled in case of data discrepancy/ any other important information
LIS Mapping______________________________________________________________________________
Take photo again
In case of LIS MappingPhotograph is to be taken for each component so that stage wise photo is available
Office Mapping______________________________________________________________________________
Independent
Office Id
Corporation (Automatically from
ejalseva – MIS)
Region Name (Automatically from ejalseva – MIS)
Division Name(Automatically fromejalseva – MIS)
Select office
Office Name
Longitude (x axis) Automatically from GPS
Latitude (y axis)
Accuracy (m)
Date / Time
GET POSITION
Automatically from GPS
Automatically from GPS
Automatically from GPS
(Automatically from ejalseva – MIS)
(Automatically from ejalseva – MIS)
RegionCorporation Circle Division
Office Name
(Automatically from ejalseva – MIS)
Office Id
(Automatically from ejalseva – MIS)
Corporation (Automatically from
ejalseva – MIS)
Office Name
(Automatically from ejalseva – MIS)
Office Id
(Automatically from ejalseva – MIS)
Region Name (Automatically from ejalseva – MIS)
Corporation (Automatically from
ejalseva – MIS)
Office Name
(Automatically from ejalseva – MIS)
Office Id
(Automatically from ejalseva – MIS)
Circle Name (Automatically from ejalseva – MIS)
Region Name (Automatically from ejalseva – MIS)
Corporation (Automatically from
ejalseva – MIS)
Office Name
(Automatically from ejalseva – MIS)
Office Id
(Automatically from ejalseva – MIS)
Circle Name (Automatically from ejalseva – MIS)
Select from drop down
Select from drop down
Select from drop down
Select from drop down
Select from drop down
Select from drop down
Select from drop down
Select from drop down
Select from drop down
Select from drop down
Select from drop down
Select from drop down
Select from drop down
Select from drop down
CAPTURE PHOTO
Care should be taken so that the accuracy which is actually the deviation from location, should be As small as possible
Click on camera to take photo
View Photograph
If photo is not proper click on
Remark To be filled in case of data discrepancy/ any other important information
Take photo again
Office Mapping______________________________________________________________________________
Water Body Mapping______________________________________________________________________________
Attributes:
Name of Water Body: __________(Enter name in Title Case eg: Lonar Lake)
Maintained by : From drop down select Water Resources Department, Jalsandharan, Zilla Parishad, Co-operative, Private, Others
District :
Tehsil :
Longitude (x axis) Automatically from GPS
Latitude (y axis)
Accuracy (m)
Date / Time
GET POSITION
Automatically from GPS
Automatically from GPS
Automatically from GPS
Care should be taken so that the accuracy which is Actually the deviation from location, should be as small as possible
CAPTURE PHOTO
If photo is not proper click on
Remark To be filled in case of data discrepancy/ any other important information
Take photo again
Select from drop down
Select from drop down
Select from drop down
River Mapping____________________________________________________________________________________________________________________________________________________________
Attributes:
Name of River/Nala /Stream : _______________(Enter name in Title Case eg: Godavari)Maintained by : From drop down select Water Resources Department, Jalsandharan,
Zilla Parishad, Co-operative, Private, Others)District :
Tehsil :
Longitude (x axis) Automatically from GPS
Latitude (y axis)
Accuracy (m)
Date / Time
GET POSITION
Automatically from GPS
Automatically from GPS
Automatically from GPS
Care should be taken so that the accuracy which is Actually the deviation from location, should be as small as possible
CAPTURE PHOTO
If photo is not proper click on
Remark
To be filled in case of data discrepancy/ any other important information
Take photo again
Select from drop down
Select from drop down
Select from drop down
Send Manager______________________________________________________________________________
For each module the send manager has got separate entries for each module like OFFICE, DAM, CANAL, K.T.WEIR, LIS, RIVER, WATERBODIES
Each photo is to be selected and sent from send manager where there is good 3G Connectivity .
All data should be stored by saving (SAVE) after each module
Send the data when proper 3 G connectivity is available. At no point of timeThe data should be sent from dam site as the connectivity is not available.
Phone setting should not be changed for taking images
Phone setting should not be changed for taking images