WaterRepellents

Solutions forMoisture Intrusion

Distributed by: BEST MATERIALS LLCPh: 800-474-7570, 602-272-8128 Fax: 602-272-8014Email: sales@bestmaterials.com www.bestmaterials.com

Concrete and masonry surfaces always require protection from the damages of wind-drivenrain, freeze-thaw, moisture, and chloride ion intrusion from de-icing salts... it's just a matterof time. High performance water repellents penetrate the substrate without creating a film onthe surface. They maintain the original appearance of the substrate and allow moisture vaporto escape, while sealing and protecting concrete and masonry for years to come.

ApplicationsCommercial, Residential andInstitutional Buildings• Brick Facades

• Concrete Blocks

• Lightweight Blocks

• Architectural Concrete

• Exposed Aggregate

• Conventional Stucco

• Natural Stone

• Concrete Pavers

Infrastructures and Transportation• Bridge Decks

• Parking Decks

• Highways

• Stadiums

• Plazas

Technologies• Silane

• Silane/Siloxane Blend

• Water-based

• Solvent-based

ENVIROSEAL® Double 7 for BrickWater repellent for brick and other vertical masonrysurfacesA patented, water-based, high-performance, clear,penetrating water repellent sealer developed for dense,vertical surfaces such as hard burnt brick, stucco andnatural stone.

ADVANTAGES & TYPICAL USES• Water-based• Interior or exterior use• Used on masonry/brick & stucco• Breathable• Easy to apply• Environmentally responsible• Excellent water bead

ENVIROSEAL® PBTWater repellent for light and medium weight blocks,and split faced CMUA patented, high-performance, water-based water repellentspecifically formulated to provide long-term protection forthe most challenging split faced light and medium weightCMU/block.

ADVANTAGES & TYPICAL USES• Water-based• Highest degree of water repellency

for lightweight block/CMU• Breathable• Easy to apply• Environmentally responsible• Prevents moisture intrusion• Excellent water bead• Superior porous block treatment

ENVIROSEAL® 2020% silane for concrete, masonry and other surfaces A patented, water-based, clear, penetrating silane sealer foruse on a multitude of surfaces including concrete, brick,stucco and precast concrete.

ADVANTAGES & TYPICAL USES• Water-based• Horizontal or vertical use• Used on exposed aggregate• USDA certified (non-food contact areas)• Interior or exterior use• Easy to apply• Environmentally responsible

ENVIROSEAL® 7Cost effective silane/siloxane sealerA patented, water-based, cost effective, clear penetratingsilane/siloxane sealer developed for use on a multitude ofvertical surfaces including poured-in-place concrete, brick,stucco and precast concrete.

ADVANTAGES & TYPICAL USES• Water-based• Cost effective• Interior or exterior use• Breathable • Easy to apply• Environmentally responsible

Water RepellentsVertical Substrate Applications

HYDROZO® Clear Double 7 VOCPenetrating water repellent sealer for porousvertical substratesA solvent-based, VOC-compliant, high-performancesealer especially suited for use on porous substrates,such as concrete block.

ADVANTAGES & TYPICAL USES• Excellent for cool weather applications• Breathable• Does not alter appearance of substrates• For use on new and existing surfaces• Reduces freeze-thaw damage• Does not harm adjacent metal or painted surfaces

HYDROZO® CLEAR 40 VOCPenetrating water repellent for vertical concrete and masonry surfaces A solvent-based, VOC-compliant, penetrating waterrepellent designed to protect new and existing verticalconcrete and masonry surfaces that are exposed toweathering elements and chloride ions.

ADVANTAGES & TYPICAL USES• No cleaning necessary for ordinary

windows or glass• Does not harm adjacent metal,

wood or painted surfaces• Excellent for cool weather applications• Prevents moisture intrusion damage• Prevents freeze-thaw damage• Breathable• Greater than 40% active ingredients

HYDROZO® 100Clear, penetrating water repellent for new and existing concrete surfacesA 100% silane sealer that penetrates and chemicallyreacts deep within the pores of concrete to form long-lasting protection to substrates subject to high trafficabrasion such as bridge decks, highway surfaces andparking garages. It will not harm adjacent metal, glass,wood or painted surfaces - which do not requirecleaning after application. This is advantageous forconcrete or masonry buildings because these surfacesneed not be masked prior to application.

ADVANTAGES & TYPICAL USES• Highest degree of water repellency• Excellent chloride ion protection• Freeze-thaw protection• Forms a chemical bond deep within the surface• Protects new and existing concrete

For project quotes or more information about any of these items, email sales@bestmaterials.com

ENVIROSEAL® 2020% silane for concrete, masonry and other surfacesA patented, water-based, clear, penetrating silane sealer foruse on a multitude of surfaces including concrete, brick,poured-in-place and precast concrete.

ADVANTAGES & TYPICAL USES• Horizontal or vertical use• Water-based• USDA certified (non-food contact areas)• Interior or exterior use• Easy to apply• Environmentally responsible• Breathable

ENVIROSEAL® 4040% silane for concrete, masonry & other surfacesA patented high-performance, water-based, clear,penetrating silane sealer designed to protect concrete andmasonry surfaces that are exposed to weathering andchloride ions.

ADVANTAGES & TYPICAL USES• Water based• Ideal for traffic-bearing surfaces• Superior protection against water penetration• Interior or exterior use• Easy to apply• Environmentally responsible• Breathable

HYDROZO® SILANE 40 VOCWater repellent for horizontal precast,prestressed and poured-in-place concreteSolvent-based, VOC-compliant, silane sealer thatpenetrates deep and chemically reacts with concrete toform a long-lasting water-repellent surface. Ideal for use onhorizontal surfaces subject to traffic abrasion.

ADVANTAGES & TYPICAL USES• Ideal for traffic-bearing surfaces• Prevents chloride ion intrusion• Superior protection against water penetration• Freeze-thaw protection• Breathable• Greater than 40% active ingredients• Excellent for cool weather applications

HYDROZO® 100 PLUSClear penetrating breathable water and oil repellentDesigned to protect new and existing concrete surfacesthat are exposed to weathering and chloride ions. Anoliophobic additive helps prevent stains caused by motoroils, greases and food products.

ADVANTAGES & TYPICAL USES• Resistant to oil, grease and food stains• Easy to apply• Breathable• Excellent chloride ion protection• Forms a chemical bond deep within the surface

Horizontal Substrate Applications

HYDROZO® 100Clear, penetrating water repellent for new and existing concrete surfacesA 100% silane sealer that penetrates and chemically reactsdeep within the pores of concrete to form long-lastingprotection to substrates subject to high traffic abrasionsuch as bridge decks, highway surfaces and parkinggarages. It will not harm adjacent metal, glass, wood orpainted surfaces - which do not require cleaning afterapplication. This is advantageous for concrete or masonrybuildings because these surfaces need not be maskedprior to application.

ADVANTAGES & TYPICAL USES• Highest degree of water repellency• Excellent chloride ion protection• Freeze-thaw protection• Forms a chemical bond deep within the surface• Protects new and existing concrete

For project quotes or more information about any of these items, email sales@bestmaterials.com

Building Systems is an industry leaderin the manufacture of constructionchemicals and building products forthe construction industry.Its widely recognized brands – Sonneborn®,Thoro®, MBT Protection and Repair,Hydrozo®, SELBY®, UCRETE®, and SRSDEGADUR® provide an expansive productoffering that includes joint sealants, grouts,waterproofing membranes, concrete repairproducts, clear sealers, performanceflooring, and wall coatings.

Building Systems has a truly unique abilityto bundle its products into comprehensive“building systems” that offer designers andcontractors effective single-source solutions totheir building and construction problems. Oursales force, technical services, and research &development groups, work together to ensurewe meet your project needs.

For every building challenge there's aBuilding Systems solution... everythingyou need to build, repair and protect.

BASF CorportationBuilding Systems889 Valley Park DriveShakopee, MN 55379www.BuildingSystems.BASF.com

Customer Service 800-433-9517Technical Service 800-243-6739

Form No. 1024906For professional use only. Not for sale to or use by the general public. © 2010 BASF 5/10 Printed in U.S.A.

LIMITED WARRANTY NOTICE Every reasonable effort is made to apply BASF exacting standards both in the manufacture of our products and in the information which we issue concerning these products andtheir use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products,but also upon many factors beyond our control. Therefore, except for such replacement or refund, BASF MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESSFOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and BASF shall have no other liability with respect thereto. Any claim regarding product defect must be received in writingwithin one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended useand assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the BASF Technical Manager.

This information and all further technical advice are based on BASF’s present knowledge and experience. However, BASF assumes no liability for providing such information and advice including the extent towhich such information and advice may relate to existing third party intellectual property rights, especially patent rights. In particular, BASF disclaims all WARRANTIES, WHETHER EXPRESS OR IMPLIED,INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. BASF SHALL NOT BE RESPONSIBLE FOR CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES(INCLUDING LOSS OF PROFITS) OF ANY KIND. BASF reserves the right to make any changes according to technological progress or further developments. It is the customer’s responsibility and obligation tocarefully inspect and test any incoming goods. Performance of the product(s) described herein should be verified by testing and carried out only by qualified experts. It is the sole responsibility of the customer tocarry out and arrange for any such testing. Reference to trade names used by other companies is neither a recommendation, nor an endorsement of any product and does not imply that similar products couldnot be used.

Distributed by: BEST MATERIALS LLCPh: 800-474-7570, 602-272-8128 Fax: 602-272-8014Email: sales@bestmaterials.com www.bestmaterials.com