Upload
lamhuong
View
223
Download
0
Embed Size (px)
Citation preview
Equivalent Standards
EQ-Standards Industry Indian
IS British
BS Japanese
JIS German
DIN American ASTM/API Any Other Standards
Bicycle Tubes IS 2039
(parts 1-3)/1991 BS 1717/1983
Autombile Tubes IS 3074 BS 6323/1982 JIS G 3445/1983 DIN 2393/1994 DIN 2394/1994
ASTM A513/1994
General Engg. Tubes IS 3601/1984 BS 6323/1982 JIS G 3445/1983 DIN 2393/1994 DIN 2393/1994
Boiler Tubes IS 1914
(Parts 1-4)/1982 BS 3059 (part-1)/1987 BS 3059 (part-1)/1990 JIS G 3461/1984
ASTM A53/1993 ASTM A214/1990
Propeller Shaft Tube TPI Specification
Air Heater Tubes IS 3601/1984 BS 3059 (part-1)/1987 JIS G 3461/1984 ASTM A214/1990 Transformer Tubes IS 8036/1976
Oil Pipes IS 1978/1982/
1979 BS 1387 / 1985 JIS G 3452/1983 DIN 17177/1979 API 5L Gr.A/1995 Shock Absorber Tubes IS 3074/1979 JIS G 3452/1983 DIN 2393/1994 ASTM A513/1994 TPI Specification Furniture Tubes IS 7138/1973 JIS G 3445/1983
Heat Exchanger Tubes BS 3606/1982 JIS G 3461/1984 DIN 17177/1979 ASTM A178/1990 ASTM A214/1990
Structural Tubes IS 1161/1979 BS 7613/1994 JIS G 3444/1994 ASTM A 500 Gr. A/1993 Idler Tubes IS 9295/1983 Sectional Tubes IS 4923/1985 JIS G 3466/1982
ASTM A 500 Gr. A/1993
Telescopic Frontfork Tubes TPI Specification Customer
Specification
Bobbin Tubes for Textile Machinery TPI Specification Customer
Specification Casing & Tubing API 5CT/1995
Hydro Carban & Process Industries IS 6286 ASTM A53
Condenser Tube IS 1914 (PT-IV) IS 246 (PT-V)
IS 11714 (PT-III) * All above Specification shall be applicable as per latest editions
Equivalent Standards
EQUIVALENT STANDARDS-TUBES WITH APPLICATIONS
WALL THICKNESS TRADE MARK (IS) INCH N. B (MM) O.D (MM) L (MM) M (MM) H (MM) 10577/82 3/8" 8 13.6 1.8 2.3 2.9 1239 (I) 2004 1/2" 15 21.3 2.0 2.6 3.2 1239 (I) 2004 3/4" 20 26.9 2.3 2.6 3.2 1239 (I) 2004 1" 25 33.7 2.6 3.2 4.0 - 1 1/2" - 38.1 2.6 3.2 4.0 1239 (I) 2004 1 1/4" 32 42.2 2.6 3.2 4.0 1239 (I) 2004 1 1/2" 40 48.3 2.9 3.2 4.0 1239 (I) 2004 2" 50 60.3 2.9 3.6 4.5 1239 (I) 2004 2 1/2" 65 76.1 3.2 3.6 4.5 1239 (I) 2004 3" 80 88.9 3.2 4.0 4.8 1161 / 1990 4" 90 101.6 3.6 4.0 4.8 1239 (I) 2004 4" 100 114.3 3.6 4.5 5.4 1161 / 1990 5" 110 127.0 4.5 4.8 5.4 1239 (I) 2004 5" 125 139.7 4.5 4.8 5.4 1161 / 1990 6" 135 152.4 4.5 4.8 5.4 1239 (I) 2004 6" 150 165.1 4.5 4.8 5.4 1161 / 1990 7" 175 193.7 4.8 5.4 5.9 3589 8" 200 219.1 4.8 5.6 5.9 3589 10" 250 273.0 - - 5.9 3589 12" 300 323.9 - - 6.3 3589 14" 350 355.6 - - 8.0 IS 3589 16" 400 406.4 - -
SIZE RANGE OF MS. ERW PIPES
Product - Dimension
SIZE RANGE OF SAW PIPES 16” TO 80” (THICKNESS 5.0 MM TO 20.0 MM)
SR.NO TOLERANCES L M/H1 THICKNESS + NOT LTD - 8% = NOT LTD - 10%
2 WEIGHT (SINGLE TH) + 10%, 8% +/.10%
3 WEIGHT (QTY 10 MT MN) .5%, +7.5% 7.5%, -5%
4 LENGHT 4 TO 7 MTR UNLESS OTHER WISE SPECIFIED
5 TENSILE STRENGTH MIN 320 MP
6 % OF ELONGATION MIN 20%
7 IS 3589 18”
20”
24”
5.5/ 6.0 /6.4/ 7.0/ 8.0/8.5/ 9.0/ 9.5/ 10.0/10.5/ 12/ 12.5/ 16.5/ 18.0
5.5/ 6.0 /6.4/ 7.0/ 8.0/8.5/ 9.0/ 9.5/ 10.0/10.5/ 12/ 12.5/ 16.5/ 18.0
6.0 /6.4/ 7.0/ 8.0/8.5/ 9.0/ 9.5/ 10.0/10.5/ 12/ 12.5/ 16.5/ 18.0
Sr. No. Size in MM
Weight
(Kg./ Feet) Sr. No. Size in MM
Weight
(Kg./ Feet)
01 20 x 20 x 3 0.273 27 90 x 90 x 7 2.900
02 25 x 25 x 3 0.334 28 100 x 100 x 7 3.300
03 30 x 30 x 3 0.400 29 55 x 55 x 8 1.944
04 32 x 32 x 3 0.486 30 65 x 65 x 8 2.341
05 35 x 35 x 3 0.500 31 75 x 75 x 8 2.703
06 37 x 37 x 3 0.500 32 90 x 90 x 8 3.281
07 40 x 40 x 3 0.546 33 100 x 100 x 8 3.676
08 50 x 50 x 3 0.700 34 110 x 110 x 8 4.180
09 25 x 25 x 4 0.425 35 130 x 130 x 8 4.830
10 35 x 35 x 4 0.600 36 55 x 55 x 10 2.400
11 45 x 30 x 4 0.670 37 65 x 65 x 10 2.856
12 25 x 25 x 5 0.547 38 75 x 75 x 10 3.342
13 32 x 32 x 5 0.790 39 90 x 90 x 10 4.070
14 35 x 35 x 5 0.800 40 100 x 100 x 10 4.526
15 40 x 40 x 5 0.912 41 110 x 110 x 10 5.030
16 50 x 50 x 5 1.155 42 125 x 125 x 10 5.984
17 65 x 65 x 5 1.488 43 130 x 130 x 10 5.970
18 45 x 30 x 5 0.850 44 150 x 150 x 10 6.930
19 25 x 25 x 6 0.600 45 75 x 75 x 12 3.940
20 32 x 32 x 6 0.912 46 80 x 80 x 12 4.263
21 40 x 40 x 6 1.064 47 90 x 90 x 12 4.800
22 50 x 50 x 6 1.368 48 100 x 100 x 12 5.377
23 65 x 65 x 6 1.763 49 110 x 110 x 12 6.300
24 75 x 75 x 6 2.067 50 125 x 125 x 12 7.108
25 90 x 90 x 6 2.493 51 130 x 130 x 12 7.120
26 100 x 100 x 6 2.797 52 150 x 150 x 12 8.296
ROLLING TOLERANCES
? Angles :
Leg Length : Upto 45 mm : ±/1.5mm
50 to 100mm : ± 2mm
Over 100mm ± 2%
Sectional weight : 3mm thick : ±5%
Over 3mm : + 5/ -3%
M. S. ANGLES (IS 2062)
Sr. No. Size in MM
Weight
(Kg./ Feet) Sr. No. Size in MM
Weight
(Kg./ Feet)
01 70 x 35 1.300 01 100 X 50 ST 2.700
02 75 x 40 ST 2.200 02 100 X 50 MD 2.100
03 75 x 40 MD 2.000 03 100 X 50 LT 1.600
04 75 x 40 LT 1.700 04 100 x 70 3.496
05 100 x 50 ST 2.918 05 120 x 58 3.405
06 100 x 50 MD 2.800 06 125 x 70 ST 4.050
07 100 x 50 MD 2.600 07 125 x 70 MD 3.500
08 100 x 50 LT 2.400 08 125 x 70 LT 2.700
09 120 x 55 3.100 09 150 x 75 ST 4.600
10 125 x 65 3.982 10 150 x 75 LT 4.100
11 150 x 75 5.107 11 175 x 85 5.928
12 175 x 75 5.958 12 200 x 100 7.873
13 200 x 75 6.800 13 225 x 110 9.667
14 225 x 80 7.935 14 250 x 125 11.582
15 250 x 80 9.302 15 300 x 140 13.710
16 300 x 90 11.035 16 350 x 140 16.081
17 350 x 100 12.980 17 400 x 140 19.030
18 400 x 100 15.230 18 450 x 150 22.222
19 Gate Channel 0.214 19 500 x 180 26.660
20Telegraph
Channel20 550 x 190 31.525
41 x 32 1.456 21 600 x 210 37.544
ROLLING TOLERANCES
? Channels : ? I Beams :
Depth : ± 2.5mm Height : +3mm/-2mm
Flange : upto 100mm ± 2mm Flange : upto 100 mm ± 2mm
Sectional weight : ± 2.5% 100 to 125 mm ± 2.5mm
125 to 200mm ± 4mm
Sectional weight: ± 2.5%
M. S. CHANNEL (IS 2062) M. S. I-BEAM (IS 2062)
Sr. No. Size in MM
Weight
(Kg./ Feet) Sr. No. Size in MM
Weight
(Kg./ Feet)
01 12 x 3 0.086 45 40 x 8
Weight
(Kg./ Feet)
02 20 x 3 0.143 46 50 x 8 0.942
03 25 x 3 0.183 47 65 x 8 1.247
04 32 x 3 0.243 48 75 x 8 1.429
05 40 x 3 0.284 49 100 x 8 1.915
06 50 x 3 0.365 50 125 x 8 2.371
07 18 x 4 0.175 51 150 x 8 2.858
08 25 x 4 0.240 52 178 x 8 3.390
09 30 x 4 0.290 53 200 x 8 3.828
10 32 x 4 0.300 54 250 x 8 4.800
11 40 x 4 0.380 55 300 x 8 5.800
12 50 x 4 2.000 56 25 x 10 0.608
13 25 x 4.5 0.270 57 32 x 10 0.760
14 30 x 4.5 0.320 58 40 x 10 0.943
15 12 x 5 0.143 59 50 x 10 1.186
16 16 x 5 0.191 60 65 x 10 1.550
17 20 x 5 0.240 61 75 x 10 1.794
18 25 x 5 0.304 62 100 x 10 2.372
19 30 x 5 0.400 63 125 x 10 2.980
20 32 x 5 0.396 64 150 x 10 3.587
21 38 x 5 0.500 65 200 x 10 4.772
22 40 x 5 0.487 66 250 x 10 6.000
23 50 x 5 0.608 67 300 x 10 7.200
24 65 x 5 0.790 68 25 x 12 0.730
25 75 x 5 0.910 69 32 x 12 0.917
26 20 x 6 0.286 70 38 x 12 1.100
27 25 x 6 0.365 71 40 x 12 0.155
28 28 x 6 0.400 72 50 x 12 1.430
29 30 x 6 0.400 73 65 x 12 1.885
30 32 x 6 0.456 74 75 x 12 2.160
31 40 x 6 0.580 75 100 x 12 2.860
32 50 x 6 0.730 76 125 x 12 3.590
33 63 x 6 0.900 77 150 x 12 4.286
34 65 x 6 0.943 78 200 x 12 5.720
35 75 x 6 1.064 79 250 x 12 7.200
36 100 x 6 1.429 80 300 x 12 8.600
37 125 x 6 1.794 81 25 x 16 0.972
38 150 x 6 2.158 82 32 x 16 1.214
39 178 x 6 2.540 83 40 x 16 1.520
40 200 x 6 2.856 84 50 x 16 1.915
41 250 x 6 3.600 85 65 x 16 2.494
42 300 x 6 4.300 86 75 x 16 2.858
43 25 x 8 0.486 87 100 x 16 3.830
44 32 x 8 0.607 88 125 x 16 4.773
M. S. FLATS (IS 2062) M. S. FLATS (IS 2062)
Sr. No. Size in MM
Weight
(Kg./ Feet) Sr. No. Size in MM
Weight
(Kg./ Feet)
89 150 x 16 5.716 113 200 x 25 11.916
90 200 x 16 7.630 114 250 x 25 15.000
91 250 x 16 9.600 115 125 x 30 8.920
92 300 x 16 11.500 116 40 x 32 3.040
93 200 x 18 8.560 117 50 x 32 3.825
94 25 x 20 1.216 118 65 x 32 4.950
95 32 x 20 1.520 119 75 x 32 5.710
96 40 x 20 1.915 120 100 x 32 7.650
97 50 x 20 2.372 121 125 x 32 9.540
98 65 x 20 3.102 122 150 x 32 11.422
99 75 x 20 3.588 123 200 x 32 15.322
100 100 x 20 4.772 124 50 x 40 4.740
101 125 x 20 5.960 125 65 x 40 6.200
102 150 x 20 7.174 126 75 x 40 7.170
103 200 x 20 9.540 127 100 x 40 9.640
104 250 x 20 12.000 128 125 x 40 11.910
105 32 x 25 1.910 129 150 x 40 14.350
106 40 x 25 2.400 130 200 x 40 19.090
107 50 x 25 2.977 131 65 x 50 7.777
108 65 x 25 3.888 132 75 x 50 8.930
109 75 x 25 4.466 133 100 x 50 11.910
110 100 x 25 5.954 134 125 x 50 14.885
111 125 x 25 7.443 135 150 x 50 17.935
112 150 x 25 8.937 136 200 x 50 23.834
ROLLING TOLERANCES
? Flats
Width upto 50mm : ± 1.0mm
50 to 75mm: ± 1.5mm
75 to 100mm : ± 2mm
100mm and above : ± 2% and maximum not exceeding 6mm
Thickness Upto 12mm : ± 0.5mm
Over 12mm : 4% and max not exceeding 1.5mm
Sectional weight :
Upto 3mm thick : ± 5%
Over 3mm thick : ± 3%
M. S. FLATS (IS 2062) M. S. FLATS (IS 2062)
Sr. No. Size in MM
Weight
(Kg./ Feet) Sr. No.
Size in
MM
Weight
(Kg./ Feet)
01 5 x 5 0.060 01 5 0.046
02 6 x 6 0.085 02 6 0.067
03 8 x 8 0.152 03 8 0.119
04 10 x 10 0.237 04 10 0.188
05 12 x 12 0.343 05 12 0.270
06 14 x 14 0.500 06 14 0.400
07 16 x 16 0.610 07 16 0.480
08 20 x 20 0.964 08 18 0.600
09 25 x 25 1.492 09 20 0.750
10 32 x 32 2.443 10 22 0.900
11 40 x 40 3.818 11 25 1.170
12 42 x 42 4.200 12 28 1.500
13 50 x 50 5.960 13 32 1.197
14 53 x 53 6.680 14 34 2.160
15 56 x 56 7.500 15 36 2.420
16 63 x 63 9.500 16 40 2.996
17 65 x 65 10.077 17 45 3.790
18 75 x 75 13.413 18 50 4.682
19 90 x 90 19.316 19 56 5.870
20 100 x 100 23.864 20 63.5 7.550
21 125 x 125 37.288 21 65 7.735
22 70 9.200
ROLLING TOLERANCES 23 73 9.970
24 75 10.530
? Round and Square Bars: 25 78 11.380
Size : Upto 25mm ± 0.5mm 26 80 12.000
25mm to 35mm ± 0.6mm 27 85 13.510
35mm to 50mm +/0.8mm 28 90 15.180
50mm to 80mm ± 1mm 29 93 16.180
80mm to 100mm ± 1.3mm 30 95 16.880
100mm and above ± 1.6% of diameter or side width. 31 100 18.740
32 105 20.620
Ovality : ± 75% of total tolerance specified on the size. 33 110 22.750
34 115 24.740
Weight : Size 10 to 16mm ± 5% 35 125 29.285
16mm and above ± 3%
In case of fixed length supplies, tolerance in length
maintained by us will be + 100mm.
M. S. SQUARE (IS 2062) M. S. ROUND (IS 2062)