Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
ELECTRICAL FEATURES
- 12V or 24V nominal input voltage
- 100Ampere total PME input current carrying capability
- 12 switched circuits that include:
- Momentary, toggle, and time-out functions.
- Pulse-width modulation of output voltage for dimming
capability.
- 3 circuits rated up to 20A maximum continuous load, 9
circuits rated up to 15A.
- 2 complete H-Bridge circuits for driving reversible motors
- Parallelable output increases current rating.
- An electronic circuit breaker protects every circuits. The current
ratio for each circuit can be set independently.
- Remote reset of any output circuitry fault through keypad.
- Input undervoltage lock down.
PC10
BLINK MARINE
Solid State POWERCORE Management Enclosure
SPECIAL FEATURES
- CAN-bus compatible (CANopen/J1939 compliance available)
- Field programmability of electrical functions and current limit trip
points available to authorized OEMs and Value-Added Resellers
(VARs)
- 4-circuit bypass for essential functions
- Optional N.O. relay contact
M A R I N E
The Power Management Unit is the brain of the system. It receives requests from switches or keypads and handles these commands based on the current state of the system. The output may be the activation/deactivation of a circuit or starting a timer function. The PowerCore then sends status data from system to keypads to turn on/off the LED indicators and backlighting.
Ø 5
,1 m
mØ
0.2
0”
!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marketing the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.
Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]
M A R I N E
ELECTRICAL PC10 Supply voltage 12V and 24V Nominal Voltage (8-32VDC)Standby current <30mA per PMELoad current Max 20A per outputInput current 100A max Communication bus RS-485 between keypad and PME CAN Bus SlaveCircuit protection electronic overcurrent protection and automotive mini blade fuse
MECHANICAL Connector Molex MX150L #19427-0049 & 19427-0032 Mating connector Molex MX150L #19418-0030 & 19418-0004 Housing ALLOY 6060 and ZA4C1 Seal TPV 8211-75Power stud 3/8-16, plated steelPC board 1,6mm thick, Nema Grade FR-4, Double clad with 3oz copper ENVIRONMENTAL Operating temperature -20ºC to +85ºC Storage temperature -40ºC to +85ºC Humidity 0 to 98% (no condensation) Ingress Protection Rating IP65
FEATURES Circuits 12Size mm connectors incl. 230 x 170 x 86 Remote current trip reset Standard on all outputs System reset Optional Status indicator Standard By-pass 4 outputsLow volt sense & lock down Optional Pull down 4 outputs“H” Bridge capability 2 complete “H” bridges available Level sense input 8 inputsDimming/PWM Features Available on 10 outputs Circuit status monitoring OptionalField re-programmable OptionalExternal status communication Optionalon the busN.O. relay contact Optional
86.2
0 m
m
170.23 mm6.70”
230.
84 m
m
219.
34 m
m3.
39”
9.08
”
8.63
”
118 mm4.64”
SPECIFICATIONS FOR PC10 SOLID STATE POWERCORE MANAGEMENT ENCLOSURE
POWERKEY PRO PKP-2300-SI
FLEXIBLE - SMART - RUGGED
HARDWARE FEATURESIP67/NEMA6/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against ingress of dust and high temperature, further to high pressure water at high temperature spray downs.
UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.
Customizable inserts – The replacement system for individual inserts makes modifying the keypad layout simpler and more economical. Hundreds of different stock inserts can be viewed at blinkmarine.com, and it is possible to order customized ones.
A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.
The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.
Icons shown on this keypad are for visual demonstration only.
AUTOMOTIVE - MARINE
PKP-2300-SI is a compact keypad based on CAN protocol. It comes equipped with six keys with interchangeable 15 mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. LED lights in RGB colors and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.
SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously. J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.
Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.
Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.
Online Set-up – An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com.
Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.
DESIGN YOUR OWN PROTOTYPE ONLINE
CANopen
J1939
BLUE=CAN LOW
ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939
MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CUV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/NEMA6/IP69K
NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH
(X2)
16.3
0 m
m0.
64’’
49.001.92’’
#10 - 32 STUDS
≈
STANDARD FEATURES• Reconfigurable keys
• Relegendable buttons
• LED state & status configurable
• Vertical or horizontal mount
• Flush or front mount
• LED backlit icons
• Multicolor indicator rings
• Laser etched icons• ON/OFF, momentary, toggle & scroll
• Hundreds of stock icons to choose from
SPECIFICATIONS FOR STANDARD KEYPADS
SOFTWARE FEATURES• Change CAN or RS485 keypad addresses independently
• Periodic status transmission
• Heartbeat
• Event status transmission
• LED acknowledgement
• Address claim transmission
• RS485, CANopen and J1939
OTHER BENEFITS• Programmer’s manual available to help support
plug-and-play reconfigurability
Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]
!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.
123
456
RED=POWERBLACK=GROUND WHITE=CAN HIGH
GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)
21.0
0 m
m0.
82’’
185.
00 m
m7.
28’’
95.00 mm3.74’’
70.0
0 m
m2.
75’’
POWERKEY PRO PKP-2400–SI
FLEXIBLE - SMART - RUGGED
CANopen Communications Protocol – Fully compliant with Device Profile 401d.
HARDWARE FEATURESIP67/NEMA6/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against ingress of dust and high temperature, further to high pressure water at high temperature spray downs.
UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.
Customizable inserts – The replacement system for individual inserts makes modifying the keypad layout simpler and more economical. Hundreds of different stock inserts can be viewed at blinkmarine.com, and it is possible to order customized ones.
A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.
The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.
Icons shown on this keypad are for visual demonstration only.
AUTOMOTIVE - MARINE
PKP-2400-SI is a compact keypad based on CAN protocol. It comes equipped with eight keys with interchangeable 15 mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. LED lights in RGB colors and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.
SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously.
J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.
Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.
Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.
Online Set-up – An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com.
Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.
DESIGN YOUR OWN PROTOTYPE ONLINE
CANopen
J1939
BLUE=CAN LOW
ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939
MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CUV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/NEMA6/IP69K
NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH
(X2)
16.3
0 m
m0.
64’’
78.003.07’’
#10 - 32 STUDS
≈
STANDARD FEATURES• Reconfigurable keys• Relegendable buttons• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons
• Multicolor indicator rings• Laser etched icons• ON/OFF, momentary, toggle & scroll • Hundreds of stock icons to choose from
SPECIFICATIONS FOR STANDARD KEYPADS
SOFTWARE FEATURES• Change CAN or RS485 keypad addresses independently• Periodic status transmission• Heartbeat• Event status transmission
• LED acknowledgement• Address claim transmission• RS485, CANopen and J1939
OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability
Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]
!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.
134
57
2
68
RED=POWERBLACK=GROUND WHITE=CAN HIGH
GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)
21.0
0 m
m0.
82’’
185.
00 m
m7.
28’’
122.00 mm4.80’’
70.0
0 m
m2.
75’’
POWERKEY PRO PKP-2600-SI
FLEXIBLE - SMART - RUGGED
HARDWARE FEATURESIP67/NEMA6/IP69K waterproof rating – Guaranteed to be
dust tight and sealed against water immersion to a depth of 1
meter for up to 1 hour. The IP69K rating provides protection
against ingress of dust and high temperature, further to high
pressure water at high temperature spray downs.
UV Protected – UVB 400 hours: Keypad is highly resistant to
deterioration caused by exposure to sunlight.
Customizable inserts – The replacement system for individual
inserts makes modifying the keypad layout simpler and more
economical. Hundreds of different stock inserts can be viewed at
blinkmarine.com, and it is possible to order customized ones.
A membrane compensation valve which self compensate the
internal pressure within the keypad, alleviating mechanical stresses
that can be produced by shifts in external temperatures.
The keypad’s symmetrical design and spacing between keys
makes it easier to install multiple keypads alongside one another.
Icons shown on this keypad are for visual demonstration only.
AUTOMOTIVE - MARINE
PKP-2600-SI is a compact keypad based on CAN protocol. It comes equipped with twelve keys with interchangeable 15 mm inserts. The
keypad is water and dust resistant, and can be installed both inside and outside the cockpit. LED lights in RGB colors and the ease with
which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.
SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and
RS485 address to the keypad. Communicate on either BUS simulta-
neously.
J1939 Address Claim Transmission – Keypads no longer have to
be pre-programmed to a specific address. This enables customers
that work in applications in the field without access to a GUI to use
any replacement keypad on-hand. The keypad can be configured to
automatically announce its address and accept a new address
assignment as appropriate.
Event Status Transmission – The keypad can send messages to
the BUS indicating a button press or a button release event has
occurred. This confirmation allows digital systems to have the
same input acknowledgements as that of the latching position of a
mechanical switch.
Periodic Status Transmission – The keypad sends a continuous
broadcast of messages indicating the press or release status of
each button at that instance. The frequency of these messages
can be adjusted in a wide range.
Online Set-up – An online set-up system makes it possible to select and
design your own prototype, then order it directly on blinkmarine.com.
Periodic Heartbeat – The keypad sends a continuous broadcast of
messages indicating it is functioning correctly. The frequency of
these messages can be adjusted in a wide range.
DESIGN YOUR OWN
PROTOTYPE ONLINE
CANopen
J1939
ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)
Standby Current <50 mA
Communication BUS RS485, CANopen, J1939
MECHANICALConnector Deutsch DT04-4P
Switch Life 3 million operations
Mounting Studs #10-32 CDA-510 phosphor bronze,
electroplated bright tin
Keypad Silicone rubber with polyurethane hardcoat
PC Board 1,6mm thick, Nema Grade FR-4, double
clad with 1oz copper
Operating Temperature -40°C to +70°C
Storage Temperature -40°C to +85°C
UV Protection UVB 400 hours
Salt Spray Per ASTMB117
Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol,
Suntan Lotion, Multi-Purpose Cleaner,
Orange Citrus Cleaner, Muriatic Acid
Ingress protection Rating IP67/NEMA6/IP69K
STANDARD FEATURES• Reconfigurable keys
• Relegendable buttons
• LED state & status configurable
• Vertical or horizontal mount
• Flush or front mount
• LED backlit icons
• Multicolor indicator rings
• Laser etched icons• ON/OFF, momentary,
toggle & scroll
• Hundreds of stock icons to
choose from
SPECIFICATIONS FOR STANDARD KEYPADS
SOFTWARE FEATURES• Change CAN or RS485 keypad
addresses independently
• Periodic status transmission
• Heartbeat
• Event status transmission
• LED acknowledgement
• Address claim transmission
• RS485, CANopen and J1939
OTHER BENEFITS• Programmer’s manual available to help support
plug-and-play reconfigurability
Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]
!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS
DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Blink, provide product and/or system options for further
investigation by users having technical expertise. It is important to analyze all aspects of the application,
including consequences of any failure. Due to the variety of operating conditions and applications for these
product(s), the manufacturer of the application is solely responsible for marking the final selection of the
product(s) and assuring that all performance, safety and warning requirements of the application are met. The
products described herein, including without limitation, product features, specifications, designs, availability and
pricing, are subject to change by Blink at any time without notice.
BLUE=CAN LOWRED=POWERBLACK=GROUND WHITE=CAN HIGH
GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)
NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH
(X2)
16.3
0 m
m0.
64’’
#10 - 32 STUDS
21.0
0 m
m0.
82’’
185.
00 m
m7.
28’’
166.86.56’’
181.50 mm7.14’’
70.0
0 m
m2.
75’’
123456
≈
789101112