Hydraulic Excavator- Technical Specifications:

TECHNICAL PARAMETER UNIT L&T KOMATSU Model PC-200-6 Capacity Ton 20 ENGINE Model Komatsu S6D 102 E-1-A Engine Type 4 Cycle, Water Cooled No Of Cylinders Nos 6 Bore X Stroke Length mm X mm 102 X 120 Power Output @ Speed HP@RPM 128@2000 Piston Displacement Liters 5.883

HYDRAULIC SYSTEM

Main Pump Type Variable Displacement Piston Type Maximum Flow LPM 412 Boom Cylinder Nos (Bore X Stroke) Nos (mm X mm) 2 (120 X 1285) Arm Cylinder Nos (Bore X Stroke) Nos (mm X mm) 1 (135 X 1490) Bucket Cylinder Nos (Bore X Stroke) Nos (mm X mm) 1 (115 X 1120)

DRIVE Maximum Drawbar Pull KG 16200 Maximum Travel Speed km / hr 3.8

DIMENSIONS OF BOOM AND STICK Boom Length mm 5700 Stick Length mm 2410

Technical Specifications – PC-200 Page 1

DIMENSIONS* Overall Length mm 9485 Length on Ground (transport) mm 5670 Overall Height ( to top of boom) mm 3170 Overall width mm 2750 Overall height (to top of cab) mm 2905 Ground Clearance, Counterweight mm 1085 Min. Ground Clearance mm 440 Tail swing radius mm 2750 Length of track on ground mm 3270 Track Length mm 4080 Track gauge mm 2200 Width of crawler mm 2800 Shoe Width mm 600 Grouser Height mm 26 Machine Cab Height mm 2020 Machine Cab Width mm 2710 Distance, swing centre to rear end mm 2740

Working Range Diagram for PC-200 Hydraulic Excavator

Technical Specifications – PC-200 Page 2

WORKING RANGE* A. Max. Digging Height mm 9050 B. Max. Dumping Height mm 6255 C. Max. Digging Depth mm 6095 D. Max. Vertical Wall Digging Depth mm 5315 E. Max. Digging Depth cut for 8' level mm 5840 F. Max. Digging Reach mm 9395 G. Max. Digging reach at ground level mm 9205 H. min. Swing Radius mm 3710

* With 2.41 m arm length