P.S. Kandhal and R.B. Mallick prepared this manual for the US Federal Highway Administration to train highway engineers in state and local governments across United States. Four types of recycling have been described in detail: Hot mix recycling; Hot in-place recycling; Cold asphalt recycling (both plant and in-place); and Full depth reclamation. Each recycling method has been described in terms of construction methods & equipment; materials & mix design; and case histories and QC/QA (quality control/quality assurance). Each chapter of the manual can be downloaded free with the links provided.
Kandhal, Prithvi S. and Rajib B. Mallick. Pavement Recycling
Guidelines for State and Local Governments. Federal Highway
Administration Report FHWA-SA-98-042, December 1997.The above
referenced comprehensive manual on asphalt pavement recycling was
prepared by Prithvi S. Kandhal, Associate Director, and Rajib B.
Mallick, Senior Research Associate, National Center for Asphalt
Technology (NCAT), Auburn University, Alabama, USA. The project was
sponsored by the US Federal Highway Administration. This manual was
used by Kandhal and Mallick to conduct field workshops throughout
the US to train highway engineers of state and local governments,
contractors, and consultants. Twelve two-day workshops were
conducted by them in different parts of the country to train
engineers of all 50 states. This comprehensive manual addresses all
issues related to recycling such as performance of recycled mixes;
selection of appropriate type of recycling; economics of recycling;
and structural design of recycled pavements. Four types of
recycling have been described in detail: Hot mix recycling; Hot
in-place recycling; Cold asphalt recycling (both central plant and
in-place); and Full depth reclamation. Each recycling method has
been described in terms of construction methods & equipment;
materials & mix design; and case histories and QC/QA (quality
control/quality assurance). The reader can download any or all of
the following chapters by clicking on URL given under each chapter
(or CTRL plus click or copy and paste in URL). For example, if the
reader is interested in cold in-place recycling only, then Chapters
13, 14, and 15 would be appropriate. Use the main reference above
if any material is quoted from any chapter. The copyright of this
manual is held solely by the US Federal Highway Administration
(FHWA). The full manual can be downloaded and printed free at the
following URL: http://www.fhwa.dot.gov/pavement/recycling/98042
Individual chapters can be downloaded and printed free at the
following URLs: 1. Introduction to Pavement Recycling
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_01.pdf
2. Performance Data of Recycled Mixtures
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_02.pdf
1
3. Selection of Pavement for Recycling and Recycling Strategies
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_03.pdf
4. Economics of Recycling
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_04.pdf
5. Hot Mix Asphalt Recycling - Batch Plant (Construction Methods
and Equipment)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_05.pdf
6. Hot Mix Asphalt Recycling - Drum Plant (Construction Methods
and Equipment)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_06.pdf
7. Hot Mix Asphalt Recycling (Materials and Mix Design)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_07.pdf
8. Hot Mix Asphalt Recycling (Case Histories and QC/QA)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_08.pdf
9. Hot In-Place Recycling (Construction Methods and Equipment)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_09.pdf
10. Hot In-Place Recycling (Materials and Mix Design)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_10.pdf
2
11. Hot In-Place Recycling (Case History and QC/QA)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_11.pdf
12. Cold-Mix Asphalt Recycling - Central Plant (Construction
Methods and Equipment)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_12.pdf
13. Cold In-Place Recycling (Construction Methods and Equipment)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_13.pdf
14. Cold-Mix Asphalt Recycling (Materials and Mix Design)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_14.pdf
15. Cold-Mix Asphalt Recycling (Case Histories and QC/QA)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_15.pdf
16. Full Depth Reclamation (Construction Methods and Equipment)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_16.pdf
17. Full Depth Reclamation (Case Histories and QC/QA)
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_17.pdf
18. Structural Design of Recycled Pavements
http://www.fhwa.dot.gov/pavement/recycling/98042/CHPT_18.pdf
3
