BUREAU

CONSUMER PRODUCTS SERVICES DIVISION VERITAS

Technical Report: Date Received:

MONDAY BEAUTY L TO

(8514)216-0117 August062014

August25, 2014 Page 1 of 12

SUNNY YU2 I EAGLE . I TERRY . I HELEN I CARMEN MONDAY BEAUTY LTD PASS 2810, 281F, PAULY CENTRE 51 HUNG TO ROAD KWUN TONG KOWLOON HONG KONG

Sample Description: Vendor: Manufacturer: Buyer: Labeled Age Grade: Appropriate Age Grade: Client Specified Age Grade: Tested Age Grade: UPC Code:

EXECUTIVE SUMMARY:

PUSH PUPPET DANCING ANIMALS NIA Sample Size: NIA Style No(s): OWN NAME SKNISKU No.: FOR AGES 4+ PO No.: OVER 4 YEARS OF AGE Ref#: NOT SPECIFIED Country of Origin:

OVER 4 YEARS OF AGE 721003169098

Assortment No.:

15 G16909 6116909 9935 NIA CHINA

NIA

The sample(s) MEET the following requirement(s):

The flammability requirements of 16 CFR 1500.3(c)(6)(vi), "Flammable solid" (FHSA regulations).

The labeling requirements of ASTM F963-11, "Standard consumer safety specification for toy safety".

The mechanical hazards requirements of ASTM F963-11 , "Standard consumer safety specification for toy safety".

The soluble heavy metals content in substrate requirements of ASTM F963-11 , "Standard Consumer Safety Specification for Toy Safety," Section 4.3.5.2(2)(b).

The BBP, DBP, DEHP, DnHP and DIDP content requirements in toys, child care articles and watches according to the California Proposition 65 settlements of County of Sacramento case number 07 AS04683, and the Alameda Superior Court case numbers BG07350969, RG08367601 , RG07351 032 and RG08378050.

The BBP, DBP & DEHP content requirements by composite testing of the Consumer Product Safety Improvement Act (CPSIA) of 2008 Sec. 108(a) Prohibition On Sale of Certain Products Containing Specified Phthalates.

The DNOP, DIDP & DINP content requirements by composite testing of the Consumer Product Safety Improvement Act (CPS lA) of 2008 Sec. 108(b)(1) Prohibition On Sale of Certain Products Containing Specified Phthalates.

Bureau Veritas Shenzhen Co., ltd 4/F, Block B, Minlida Industrial Building, 4th Zone of Honghualing Industrial Park, Xlli To'Ml, Nanshan District, Shenzhen, Guangdong, P.R.C. Tel: 86-755-86185200 Fax: 86-755-86185206 www.bureauverttas.com/cps

This r~port is goo.o.emed by, and Jncorporatu b'j reftrerKA, lM Condi~Or\$ of T.sting as postold at tht dat• or i!O.SUa()Co) or dlis report at Ntp:JN:.o.\'l.buttauverit.u,comk:ps :ilnd is inti!nded for )'OU' e"tdi.J!.ive us.. My copying Q( repl:c.ation of Chis repQ(t toOt for an)' otMr person or enlity, or use or OIK name or badem11r1c., Is perrnitto1d orly v.Hh OUf priOf Y.ritt;m p«mi~oo. Tlisrt"port se~ forth 01.8 findngs :;d~y oMih respea to 'tle test s.amPeslo:kntilitd Mrein. The r•Wts u t fMlln Uisttpottar<l no:Nindic:ative orn-presentatlw of the qualrty orchara ctffisticsofthe lot from v.tidl a testsamrJe was takenoranW" Srrila rorkten'kal product wless ~cificaly arrl eYpte~y OO<!d. Our report indud~s all of tho te:sts rcqll<!~l~ by you a nd the rnl.Ats lhf:reof bJ~ upoo d'le inf01m.1tion tholt you ptovldtd 10 1.15. You hall• 60~)"S from d2ta ofiul.W'IGoll of this r~pon to noufy us ol an~ ma~rial error or omis51on caus.ed by otK~•gence; pro\lded, hQv.\wer, !hat w ch noti(;e W I be in v.titi"ng and W !l 6p«.il'icalfy addlcs;s the is.wa )'01..1 v.ir.h lo fil i&e. A falu rc to ralw liuch lw.HJ v.iflln the prescribed tin'Wt t.haM oon!>tituto you unqua~ed ae«ptance of tt... complet~Mss of Uis report, tht ttsts c.ondo.ldtd and 1M c;orrectnns oftht rtpoor1 conW~ts.

EXECUTIVE SUMMARY:

The sample(s) MEET the following requirement(s):

BUREAU VERITAS

MONDAY BEAUTY L TO Technical Report: (8514)216-0117

August 25, 2014 Page 2 of 12

The total lead content of 1 OOppm requirements by composite testing in substrate materials (Consumer Products Safety Improvement Act (CPS lA) of 2008).

The total lead content of 90ppm requirements of 16 CFR 1303, "Ban of lead-containing paint and certain consumer products bearing lead-containing paint" as mandated by Congress in section 101 (f) of the Consumer Products Safety Improvement Act (CPSIA) of 2008, Public Law 110-314.

The tracking label requirement of the Consumer Product Safety Improvement Act (CPSIA) of 2008 section 103 Tracking Labels for Children's Products.

The sample(s) was tested to the following requirement(s) and the data provided is for informational purposes only:

The initial total heavy metals content analysis for soluble heavy metals content in substrate requirements of ASTM F963-11 , "Standard Consumer Safety Specification for Toy Safety," Section 4.3.5.2(2)(b).

Note: The sample(s) was not evaluated to the Normal Use testing requirements specified in ASTM F963-11, Section 8.5. It is the responsibility of the manufacturer, vendor or distributor to conduct tests that will simulate normal use conditions. These tests shall ensure that hazards are not generated through normal wear and deterioration of the sample(s). These tests shall also simulate the normal play mode of the toy and to simulate the expected mode of use of the particular toy. The tests shall be conducted in an expected use environment. These normal use tests shall simulate the intended use of the toy based on its estimated lifetime.

Note: According to the associated documents of Consumer Product Safety Improvement Act (CPSIA) of 2008, exemptions were granted to certain materials or products, such as natural materials I paper and similar materials I CMYK process printing inks I metal & alloys I electronics devices components I ordinary books I dyed & undyed textiles. Therefore, the lead content analysis of some components was not conducted.

Note: The received sample(s) contained accessible material(s) of less than 10 milligrams by weight on one single sample, therefore such material(s) was not subject to the heavy metals analysis of ASTM F963-11 , "Standard consumer safety specification on toy safety", Section 4.3.5.1 (2) and 4.3.5.2, as specified in Section 8.3.3.6(2) and Section 8.3.5.3(2).

WCieo

BUREAU VERITAS SHENZHEN CO.,L TO

W endy Cha Manager Toys And Juvenile Products Department

RESULTS:

BUREAU VERITAS

MONDAY BEAUTY L TO Technical Report: (8514)216-0117

August25,2014 Page 3 of 12

APPROPRIATE AGE GRADE DETERMINATION

The Appropriate Age Grade is determined with reference to the Age Determination Guidelines of the Consumer Product Safety Commission (CPSC); and the ASTM F963-11, "Standard Consumer Safety Specification on Toy Safety". Annex A1

Note : The most stringent age grade from the Labeled Age Grade and the Appropriate Age Grade will be used for testing.

Note : If the client does not specify an age grade for testing or request Bureau Veritas Consumer Products Services, Inc. to determine an appropriate age grade, the labeled age grade will be used for testing.

USE AND ABUSE TESTS

The samples were undergo the tests in accordance with section 8.6 through 8.16, whichever is applicable

Test Test Parameters Standard Reference

Impact Test 4 x3 ft 1500.53(b)

Torque Test 4 in-lbs 1500.53(e)

Tension Test 15 lbs 1500.53(f)

Compression Test 30ibs 1500.53(g)

RESULTS:

Section

4.1

4 .3.7

4.5

4.6

4.7

4.8

4.9

4 .10

4.11

4.12

4.13

4.14

4.15

4 .16

4.17

4.18

4.19

4.20

4.21

4 .22

4.23

4.24

4.25

4 .26

4.27

4.30

4.32

4.34

4.35

4.36

4.37

4.38

4.39

BUREAU VERITAS

MONDAY BEAUTY L TO Technical Report: (8514)216-0117

August25,2014 Page 4 of 12

PHYSICAL AND MECHANICAL HAZARDS (ASTM F963-11)

Requirement Result

Material Quality M

Stuffing Materials N/A

Sound-Producing Toys N/A

Small Objects N/A

Accessible Edges M

Projections N/A

Accessible Points M

Wires and Rods N/A

Nails and Fasteners N/A

Plastic Film N/A

Folding Mechanisms and Hinges N/A

Cords, Straps and Elastics N/A

Stability and Over-Load Requirements N/A

Confined Spaces N/A

Wheels, Tires, and Axles N/A

Holes, Clearances and Accessibility of Mechanisms M

Simulated Protective Devices N/A

Pacifiers N/A

Projectile Toys N/A

Teethers and Teething Toys N/A

Rattles N/A

Squeeze Toys N/A

Battery-Operated Toys N/A

(exclude section 4.25.1 0 Battery-powered ride-on toys)

Toys Intended to be Attached to a Crib or Playpen N/A

Stuffed and Beanbag-Type Toys N/A

Toy Gun Marking N/A

Certain Toys with Nearly Spherical Ends N/A

Small Balls N/A

Pompoms N/A

Hemispheric-Shaped Objects N/A

Yo Yo Elastic Tether Toys N/A

Magnets N/A

Jaw Entrapment in Handles and Steering Wheels N/A

M = Meet NM = Not Meet NIA = Not Applicable R = Refer to Comment Section

RESULTS:

Section

5.4 & 5.3

5.5 & 5.3

5.6 & 5.3

5.7 & 5.3

5.8 & 5.3

5.9 & 5.3

5.10&5.3

5.11

5.12

5.13

5.15

5.15.1 & 5.3

5. 16

5.17 & 5.3

6.1

6.2

6.3

6.4 & 5.3

6 .5.1-2

6.5.3

6.6

7.1

7.2

~sURE AU VERITAS

MONDAY BEAUTY L TO Technical Report: (8514)216-0117

August 25, 2014 Page 5 of 12

LABELING AND INSTRUCTIONAL REQUIREMENT (ASTM F963-11)

Requirement Result

Aquatic Toys N/A

Crib and Playpen Toys N/A

Mobiles N/A

Stroller and Carriage Toys N/A

Toys Intended to be Assembled by an Adult N/A

Simulated Protective Devices N/A

Toys with Functional Sharp Edges or Sharp Points N/A

Small Objects, Small Balls, Marbles and Balloons (16 CFR 1500.19) N/A

Toy Caps (16CFR1500.86) N/A

Art Materials (16 CFR 1500.14(b)(8)) N/A

Battery-Operated Toys (exclude 5.15.1) N/A

Battery-Powered Ride-On Toys N/A

Promotional Materials M

Magnets N/A

Definition and Description M

Crib and Playpen Toys N/A

Mobiles N/A

Toys Intended to be Assembled by an Adult N/A

Battery-Operated Toys N/A

Battery-Powered Ride-On Toys N/A

Toys in Contact with Food N/A

Producer's Name and Address M

Battery-Powered Ride-on Toys N/A

M = Meet NM = Not Meet NIA = Not Applicable R = Refer to Comment Section

FLAMMABILITY (16 CFR SECTION 1500.3(c)6){vi))

Requirement Test Method Findings Reference

Burn rate no greater than 0.1 of an inch 16 CFR 1500.44 Most rapid burn rate less than 0.1 of an inch per per second second.

RESULTS:

'BUREAU · VERITAS

MONDAY BEAUTY L TO Technical Report: (8514 )216-0117

August25, 2014 Page 6 of 12

TOTAL LEAD CONTENT IN SURFACE COATING BY COMPOSITE TESTING ("Ban of Lead-containing paint and certain consumer products bearing Lead-containing paint", Consumer Product Safety Improvement Act (CPSIA) of 2008)

Test Method: U.S. CPSC-CH-E1003.09.1

Element: Lead

Requirement: Maximum allowable limit: 90 mglkg

Sample Description Result (mglkg) Conclusion

Color I Component

(A) 1 white I black coating

L T = Less Than * = Average of duplicate analyses

I Location I Style Overall I Potential

1 eyes & nose I LT 10 I - Pass

mg/kg = milligrams per kilogram (ppm = parts per million) Potential = Estimated lead content per component is based on calculation by component individual weight

TOTAL LEAD CONTENT IN SUBSTRATE BY COMPOSITE TESTING (100PPM) (Consumer Product Safety Improvement Act (CPSIA) of 2008)

Test Method: U.S. CPSC-CH-E1 001-08.1 (June 21, 2010) or U.S. CPSC-CH-E1002-08.1 (June 21, 201 0).

Analyte Lead (Pb) Sample Description Result Conclusion

Color I Component Location St}'le (mglkg) (A) I light green plastic body LT 10 Pass

(B) 1 black plastic body LT 10 Pass

L T = Less Than mglkg = milligrams per kilogram (ppm = parts per million) * = Average of duplicate analyses

RESULTS:

· BUREAU VERITAS

MONDAY BEAUTY LTD

Technical Report: (8514)216-0117 August 25, 2014

Page 7 of 12

TOTAL HEAVY METALS CONTENT - INITIAL ANALYSIS FOR SOLUBLE HEAVY METALS CONTENT IN SUBSTRATE (ASTM F963-11, Section 4.3.5.2(2)(b))

Test Method: ASTM International Standard ASTM F963-11, Section 8.3.1 and Annex A?.

Sample Color Location Style Identity

Type 1: Substrate other than modeling clay

A. light green plastic body black plastic body

B. white thread body

Analyte As Ba Cd Cr Hg Pb Sb Se

Max. Limit Type I

25 1000 75 60 60 90 60 500 (mQ/kQ) Max. Limit Type II

25 250 50 25 25 90 60 500 (mglkg)

Analvte As Ba Cd Cr HQ Pb Sb Se Conclusion Sample Result mQikQ)

A LT7 1600 LT 10 14 LT5 110 19 LT 10 Data

B LT7 62 LT 10 LT 7 LT5 LT 10 200 LT 10 Data

mglkg =milligrams per kilogram (ppm=parts per million) As = Arsenic, Ba = Barium, Cd = Cadmium, L T = Less Than Cr = Chromium, Hg = Mercury, Pb = Lead, NO = None Detected Sb = Antimony, Se = Selenium Detection limit (mglkg): As and Cr = 7, Hg = 5, other elements = 10

Remark: Textiles (natural or synthetic) are exempted for lead content requirement according to clarification of Toy Industry Association for ASTM F963-11. The lead content analysis result of corresponding material herein is for client's reference only. On an initial analysis for soluble heavy metals content, any individually tested component of greater than the set limit or any composite tested components of greater than 80% of the set limit, the result is inconclusive for the requirement and therefore were retested with soluble heavy metals analysis of ASTM F963-11, Sections 8.3.5 (excluding 8.3.5.5(3)) as specified in Section 8.3.1.3. The result herein is for reference only (show data), please refer to soluble heavy metals content analysis for the corresponding conclusive results.

RESULTS:

BUREAU -VERITAS

MONDAY BEAUTY LTD

Technical Report: (8514)216-0117 August 25, 2014

Page 8 of 12

SOLUBLE HEAVY METALS CONTENT IN SUBSTRATE (ASTM F963-11, Section 4.3.5.2(2)(b))

Test Method: ASTM International Standard ASTM F963-11 , Section 8.3.5 (Excluding 8.3.5.5(3))

Sample Color Identity

Type 1: Substrate other than modeling clay

A white thread body

B light green plastic body

c black plastic body

Analyte As Ba Cd Cr Hg

Max. Limit Type I

25 1000 75 60 60 (mg/kg) Max. Limit Type II

25 250 50 25 25 (mg/kg) Analytical 60% 30% 30% 30% 50% Correction

As Ba Cd Cr Hg

Analyte

Sample Result mg/kg)

A LT 2 4 LT2 LT2 LT2

B LT 2 LT2 LT2 LT2 LT 2

c LT 2 LT2 LT 2 LT 2 LT 2

mglkg = milligrams per kilogram (ppm=parts per million) CR = adjusted analytical result L T = Less Than NO = None Detected

Remark:

Location Style

Pb Sb Se

90 60 500

90 60 500

30% 60% 60%

Pb Sb Se Mass of

Trace Conclusion Amount

(g)

LT 2 4 LT2 PASS

LT 2 LT2 LT 2 PASS

LT2 LT 2 LT 2 PASS

As = Arsenic, Ba = Barium, Cd = Cadmium, Cr = Chromium, Hg = Mercury, Pb = Lead, Sb = Antimony, Se = Selenium Detection limit (mglkg): Each element 2

Textiles (natural or synthetic) are exempted for lead content requirement according to clarification of Toy Industry Association for ASTM F963-11. The lead content analysis result of corresponding material herein is for client's reference only.

RESULTS:

·· BUREAU· VERITAS

MONDAY BEAUTY LTD Technical Report: (8514)216-0117

August25,2014 . Page 9 of 12

PHTHALATES CONTENT IN CHILDREN'S TOYS AND CHILDCARE ARTICLES BY COMPOSITE TESTING (Consumer Product Safety Improvement Act (CPSIA) of 2008 Sec. 108(a) Prohibition On Sale of Certain Products Containing Specified Phthalates- BBP I DBP I DEHP CONTENT)

Test Method: With reference to U.S. CPSC-CH-C1 001-09.3 (April1, 201 0).

Sample Color I Component Location Style Identity

A white I black coating eyes & nose

8 light green plastic body

c black plastic body

BBP DBP DEHP 0.1 0.1 0.1

Analyte BBP DBP DEHP Conclusion

Sample Result(%)

A LT 0.005 LT0.005 LT 0.005 PASS

8 LT 0.005 LT0.005 O.Q35 PASS

c LT 0.005 LT0.005 LT 0.005 PASS

Detection Limit : BBP = Butyl benzyl phthalate (0.005%) Results reported in percentage DBP = Dibutyl phthalate (0.005%) L T = Less than DEHP = Di(2-ethylhexyl) phthalate (0.005%) NO = None detected

RESULTS:

B U R 'E AU . VERITAS

MONDAY BEAUTY L TO Technical Report: (8514)216-0117

August25, 2014 Page 10 of12

PHTHALATES CONTENT IN CHILDREN'S TOYS AND CHILDCARE ARTICLES BY COMPOSITE TESTING (Consumer Product Safety Improvement Act (CPSIA) of 2008 Sec. 1 08(b)(1) Prohibition On Sale of Certain Products Containing Specified Phthalates - DNOP I DINP I DIDP CONTENT)

Test Method: With reference to U.S. CPSC-CH-C1001-09.3 (April1, 2010).

Sample Color I Component Location Style Identity

A white I black coating eyes & nose

B light green plastic body

c black plastic body

DNOP DINP DIDP 0.1 0.1 0.1

Analyte DNOP DINP DIDP Conclusion Sample Result(%)

A LT 0.005 LT 0.005 LTO.OOS PASS

B LT 0.005 0.023 LTO.OOS PASS

c LT 0.005 LT0.005 LT O.OOS PASS

Detection Limit : DNOP = Di-n-octyl phthalate (0.005%) Results reported in percentage DINP = Di-iso-nonyl phthalate (0.005%) L T = Less than DIDP = Di-iso-decyl phthalate (0.005%) NO = None detected

RESULTS:

VERITAS

MONDAY BEAUTY L TO Technical Report: (8514)216-0117

August25, 2014 Page 11 of 12

BBPIDBPIDEHPIDnHP/DIDP PHTHALATES CONTENT REQUIREMENTS IN TOYS, CHILD CARE ARTICLES AND WATCHES (California Proposition 65 settlements of County of Sacramento case number 07AS04683, and the Alameda Superior Court case numbers BG07350969, RG08367601, RG07351032 and RG08378050)

Color I Component Location Style

Composite of

A. white I black coating eyes & nose

B. light green plastic body

C. black plastic body

Test Parameter BBP DBP DEHP DnHP DIDP

Limit(%) 0.1 0.1 0.1 0.1 0.1

Sample Result(%) Conclusion

A LT 0.005 LT 0.005 LT0.005 LT 0.005 LT0.005 PASS

8 LT 0.005 LT 0.005 0.035 LT 0.005 LT0.005 PASS

c LT 0.005 LT 0.005 LT0.005 LT0.005 LTO.OOS PASS

Detection Limit : Results reported in percentage BBP = Butyl benzyl phthalate (0.005%) L T = Less than DBP = Dibutyl phthalate (0.005%) NO = None detected DEHP = Di(2-ethylhexyl) phthalate (0.005%) DnHP = Di-n-hexyl phthalate (0. 005%) DIDP = Di-iso-decyl phthalate (0.005%)

RESULTS:

Sample Number

(8514)216-0117

BUR ·EAU. VERITAS

' . •

MONDAY BEAUTY L TO Technical Report: (8514)216-0117

August 25, 2014 Page12of12