Upload
leov4777
View
318
Download
13
Tags:
Embed Size (px)
Citation preview
Earth Resistivity Meter 16GL-N
www.pasigeophysics.com
P.A.S.I. S.R.L. Via Galliari 5/E 10125 Torino ITALY tel. +39 011 6507033 fax +39 011 658646
e-mail: [email protected]
www.pasigeophysics.com
High resolution (16 bit, floating point)
High sensitivity (lowest voltage measured: 600nV)
Instrument managed by multiprocessor
Continuous readout of current/voltage
Autoranging (automatical adapting of the instrument range to the signal value to measure)
Acquisition memory of 18000 readings without direct data downloading
Easy menu for quick learning
Creation of energetic wave based upon the parameters supplied by the user
Data transfer through USB 2.0
More than 40 hours of autonomy
Automatic filtering
Notch filters 50/60Hz
Reduction of noise with stacking and average of the values acquired
Automatic calibration at every switch-on
Suitable to any type of energizer (max.1000V, 1A)
Light and compact structure in a sturdy weatherproof case
Applications Subsoil groundwater prospecting at shallow, medium and great depth.
Geological stratigraphy
Studies of salt water contamination in fresh water layers
Landslide monitoring
Mineral exploration (sulphides, etc.)
Archaeological research
Main Functions
for additional technical or commercial questions pls. e-mail to [email protected]
Energization curve: Resolution: Display: N of readout per wave Voltage range for VMN Display of measures Memory: External data ports: Max power imput Noise suppression: Power supply: Autonomy: Operating temperature: Storage temperature: Physical dimension: Weight:
Technical Specifications:
may be customized by the following parameters: positive and negative wave length: 0,1 9,9 sec (impl. at 25 sec.) time between positive and negative wave: 0,1 9,9 sec intercycle time: 1 99 sec no of cycles: 1 99 610 nV, 126,8nA 16 x 2 characters, background lighting 3 readouts of voltage and 3 readouts of current, consecutively and at wave term from +/-20mV to +/-1280 V (automatically selected) datum and time sequence number V, I and V/I (already mediated) up to 18000 measures USB 2.0 1000 V 1 A superior to 98 db at 50-60 Hz 2x internal rechargeable battery 6V - 4A/h more than 50 h, with low battery alarm indicated on display 0 60C -20C +80C 38 x 27 x 15 cm (shock proof case) 5,4 Kg
USB 2.0 to PC
BATTERY CHARGER
GEO-010-000
GEO-004-000 GEO-004-000
GEO-034-000
GEO-005-000 GEO-005-000
GEO-010-000 GEO-010-000
for additional technical or commercial questions pls. e-mail to [email protected]
Rechargeable Accumulator for V.E.S. P100-1/2/3N
A valid and ecological alternative to disposable 90V batteries, P100-XN represents a renewable energy source for the realization of vertical electrical soundings. It will be possible to carry out a series connec-tion up to a voltage delivery of maximum 1000V. P100-XN is compatible with all P.A.S.I. earth resistivity meters and is delivered in a practical transport case with handle.
Technical Specifications:
P100-1 TECHNICAL SPECIFICATIONS Internal 12V-12Ah Pb-gel battery Output voltage from 0-100 V Output current guaranteed 1 A Protection against short circuits Indication of battery charge on three levels Indication of current overload RESERVE button (reset and forced activation) Battery charger connector protected against polarity inversions
P100-2 TECHNICAL SPECIFICATIONS Internal 12V-12Ah Pb-gel battery Output voltage from 0-200 V Output current guaranteed 500 mA Protection against short circuits Indication of battery charge on three levels Indication of current overload RESERVE button (reset and forced activation) Battery charger connector protected against polarity inversions
P100-3 TECHNICAL SPECIFICATIONS Internal 12V-12Ah Pb-gel battery Output voltage from 0-300 V Output current guaranteed 300 mA Protection against short circuits Indication of battery charge on three levels Indication of current overload RESERVE button (reset and forced activation) Battery charger connector protected against polarity inversions
Example of serialization of three P100-2 The following figure indicates the serialization scheme 3 x P100-2 = 600V/500mA:
for additional technical or commercial questions pls. e-mail to [email protected]
Configurations and part list