PARTS MANUAL - Future Mobility Healthcarecapella pb rev 14 page 7 capella – growable lower frame table item qty notes part no. description price/ per unit 1 6 1000008 washer flat

PARTS MANUAL

CAPELLA PB REV 14 Page 2

FUTURE MOBILITY HEALTHCARE APPRECIATES YOUR BUSINESS. OUR CUSTOMER SERVICE REPRESENTATIVES CAN BE CONTACTED AT:

TO PLACE ORDERS:

(905) 671-1661

FOR YOUR CONVENIENCE YOU MAY ALSO PLACE ORDERS BY FAX AT:

FAX: (905) 671-3377

PLEASE VISIT OUR WEBSITE AT:

www.futuremobility.ca

*Part prices and configurations included in this Parts Manual are subject to change without prior notice. * All prices are shown as per unit individual price.


Contents Contents ...........................................................................................................................................3

FRAMES ............................................................................................................................... 6

CAPELLA – GROWABLE LOWER FRAME ...................................................................................6

CAPELLA – LOWER FRAME PIN ASSEMBLY ...............................................................................8

CAPELLA – FIXED LOWER FRAME ..............................................................................................9

CAPELLA 45 – GROWABLE LOWER FRAME ASSEMBLY ...................................................... 11

CAPELLA – GROWABLE LOWER FRAME SET UP CHART ..................................................... 13

CAPELLA 45 – GROWABLE LOWER FRAME SET UP CHART ............................................... 14

CAPELLA – GROWABLE SEAT FRAME ..................................................................................... 15

CAPELLA – GROWABLE SEAT FRAME SET UP CHART ......................................................... 17

CAPELLA 45 – GROWABLE SEAT FRAME ASSEMBLY ........................................................... 18

CAPELLA 45 – GROWABLE SEAT FRAME SET UP CHART .................................................... 20

CAPELLA – SEAT FRAME REAR SUPPORT TUBE .................................................................... 21

CAPELLA – PIVOT LINKS AND GAS CYLINDER ...................................................................... 23

CAPELLA – PIVOT BLOCK (GROWABLE WIDTH FRAME) .................................................... 25

CAPELLA – PIVOT BLOCK (FIXED WIDTH FRAME) ............................................................... 25

CAPELLA 45 – H-LINKS HARDWARE........................................................................................ 27

CAPELLA 45 – FRONT H-LINK ASSEMBLY (16-20”) ................................................................ 29

CAPELLA 45 – FRONT H-LINK ASSEMBLY (20-24”) ................................................................ 29

CAPELLA 45 – REAR H-LINK ASSEMBLY (16-20”) ................................................................... 31

CAPELLA 45 – REAR H-LINK ASSEMBLY (20-24”) ................................................................... 31

CAPELLA – SINGLE PIVOT GAS CYLINDER (OLD ACTUATOR) ............................................ 33

CAPELLA – SINGLE PIVOT GAS CYLINDER (NEW ACTUATOR) ........................................... 35

CAPELLA 45 – GAS CYLINDER AND POSI-LOC HARDWARE (OLD ACTUATOR) ............. 37

CAPELLA 45 – GAS CYLINDER AND POSI-LOC HARDWARE (NEW ACTUATOR) ............ 39

CAPELLA 45 – FRONT SHROUD ASSEMBLY ........................................................................... 41

CASTERS AND FORKS ...................................................................................................... 42

CAPELLA – FRONT CASTER MOUNTING HARDWARE ......................................................... 42

ADJUSTABLE HEIGH FRONT CASTER MOUNT ...................................................................... 44

CAPELLA – ADJUSTABLE HEIGHT CASTER STF SET-UP CHART .......................................... 46

REAR WHEELS AND MOUNTS ........................................................................................ 47

CAPELLA – REAR AXLE MOUNT HARDWARE........................................................................ 47

12” REAR WHEELS 12.5” STF ASSEMBLY ................................................................................. 49

LEGREST HANGERS & SEATPAN .................................................................................... 51

CAPELLA – SEAT PAN HARDWARE & HANGERS .................................................................. 51

CAPELLA 45 – GROWABLE SEAT- PAN & HANGERS ASSEMBLY ........................................ 53


CAPELLA AND CAPELLA 45 – SWING AWAY LEGRESTS ..................................................... 53

LEGREST HANGER CAPELLA PIN STYLE .................................................................................. 55

LEGREST HANGER U-BOLT STYLE (CAPELLA / CAPELLA 45) .............................................. 57

LEGREST HANGER DUAL SWINGAWAY (CAPELLA / CAPELLA 45) ................................... 59

LEGREST SWINGAWAY PIN-STYLE ........................................................................................... 61

LEGREST SWINGAWAY U-BOLT ................................................................................................ 63

LEGREST SWINGAWAY U-BOLT (PEDIATRIC)......................................................................... 65

LEGREST DUAL SWINGAWAY CENTRE-PIVOT ....................................................................... 67

LEGREST DUAL SWINGAWAY CENTRE-PIVOT PEDIATRIC .................................................. 69

LEGREST HANGER U-BOLT STYLE, ELEVATING ..................................................................... 71

ELEVATING LEGREST - SEATPAN ................................................................................... 73

ELEVATING LEGREST CENTER PIVOT ...................................................................................... 73

ELEVATING LEGREST DUAL SWING AWAY ........................................................................... 75

CAPELLA SEAT PAN 1” RISER BLOCK ....................................................................................... 78

ADJUSTABLE SEATPANS ............................................................................................................ 80

FIXED SEATPANS ......................................................................................................................... 82

PUSH CANES ..................................................................................................................... 84

CAPELLA 45 – PUSH CANE MOUNTING HARDWARE – FIXED ........................................... 84

CAPELLA 45 – PUSH CANE MOUNTING HARDWARE – FOLD DOWN ............................. 85

CAPELLA PUSH CANE MOUNTING HARDWARE – FLIP BACK ARM .................................. 86

PUSH BAR HI/LO (FIXED – FOLD DOWN) ............................................................................... 88

PUSH BAR HI/LO (FIXED – FOLD DOWN) MOUNTING HARWARE ................................... 90

PUSH CANE HI/LO (FIXED – FOLD DOWN) ............................................................................ 91

1” DUAL PUSHCANE HI/LO (FIXED – FOLD DOWN) ............................................................ 93

ADJUSTABLE HINGE PUSH BAR HI/LO ................................................................................... 95

CAPELLA 45 – ANGLE ADJUSTABLE RECLINE PUSH BAR ................................................... 97

CAPELLA 45 – RECLINE BACK FRONT CROSSTUBE .............................................................. 99

ANTI-TIPPERS ................................................................................................................ 101

CAPELLA QUICK FLIP ANTI-TIPPERS ...................................................................................... 101

ARMRESTS...................................................................................................................... 102

T-STYLE PIN RELEASE GENERAL ASSEMBLY ......................................................................... 102

CAPELLA – T-STYLE ARM BASE MOUNT ASSEMBLY ........................................................... 103

CAPELLA 45 – T-STYLE ARM BASE MOUNT ASSEMBLY ...................................................... 103

ARMREST TOP T-STYLE PIN RELEASE ADJUSTIBLE ............................................................. 105

ARMREST TOP, CURVED – HALF LAPTRAY ASSEMBLY ...................................................... 107

ARMREST TOP -– HALF LAPTRAY ASSEMBLY ....................................................................... 109

ARMREST TOP FIXED HEIGHT T-STYLE .................................................................................. 111


ARMREST MID T-STYLE PIN RELEASE (ADULT SIZE) LT/RT ASSEMBLY ............................ 113

ARMREST MID T-STYLE PIN RELEASE (CHILD SIZE) LT/RT ASSEMBLY .............................. 115

ARMREST TOP HEIGHT ADJ WITH KNOB ALUMINUM VINYL .......................................... 117

ARMREST TOP HEIGHT ADJ WITH KNOB STEEL GEL ......................................................... 119

ARMREST MID T-STYLE KNOB .................................................................................................. 121

ARMREST FLIP-BACK HEIGHT ADJ. CAPELLA ...................................................................... 123

WHEEL LOCKS ............................................................................................................... 125

CAPELLA – WHEEL LOCK REAR WHEEL ............................................................................... 125

BERNER WHEEL LOCK SYSYTEM ................................................................................. 127

BERNER WHEEL LOCK PUSH - PULL STYLE ........................................................................... 127

BERNER WHEEL LOCK PUSH UNILATERAL .......................................................................... 129

BERNER WHEEL LOCK PULL UNILATERAL ........................................................................... 131

ATTENDANT PEDAL ..................................................................................................... 133

ATTENDANT PEDAL WHEEL LOCK – CAPELLA/ CAPELLA 45 .......................................... 133

ATTENDANT PEDAL TILT – CAPELLA/ CAPELLA 45 ........................................................... 135

TRIGGER HANDLE & CABLES ....................................................................................... 137

CAPELLA – TILT TRIGGER HANDLE AND SINGLE CABLES ................................................ 137

CAPELLA 45 – TILT TRIGGER HANDLE AND CABLE ........................................................... 139

CAPELLA 45 – RECLINE TRIGGER HANDLE AND SINGLE CABLES ................................... 141

TRANSIT HOOKS ........................................................................................................... 143

CAPELLA – CAPELLA 45 REAR TRANSIT HOOKS ................................................................ 143

CAPELLA 45 – FRONT TRANSIT HOOKS ............................................................................... 143

POWER OPTIONS .......................................................................................................... 145

CAPELLA 45 – POWER TILT OPTION ..................................................................................... 145

ACCESSORIES ................................................................................................................ 147

OXYGEN TANK HOLDER FIXED BACK ................................................................................... 147

OXYGEN TANK HOLDER RECLINE BACK .............................................................................. 149

CAPELLA TO CAPELLA 45 CONVERSION KIT ....................................................................... 151


FRAMES

CAPELLA – GROWABLE LOWER FRAME


CAPELLA – GROWABLE LOWER FRAME TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT

1 6 1000008 WASHER FLAT 5/16 X 1/16 OD 1/16 THK BLK $1.50

2 4 1000393 SCREW, SOCKET HEAD CAP, 5/16-18NC X 2 $3.00

3 4 1000396 NUT, HEX-NYLOCK THIN, 5/16-18NC $2.00


5 8 1001195 SCREW, SOCKET HEAD CAP, 1/4-20 X 2.25 $3.00

6 2 1013463 SPACER DISK, REAR TUBE $16.00

7 1 A 1013529 MAIN SIDE RAIL RT - WELDMENT $315.00

8 1 A 1013530 MAIN SIDE RAIL LT - WELDMENT $315.00

9 2 1013595 REAR INSERT PLUG - SIDE FRAME $18.00

10 6 1013691 SCREW, SOCKET HEAD CAP, 5/16-18NC X 3.00 $3.00

11 1 1013904 PIVOT SUPPORT BRACKET RT $96.00

12 1 1013905 PIVOT SUPPORT BRACKET LT $96.00

13 2 1013913 CENTER LOWER ADJUSTMENT TUBE $85.00

14 2 1013914 FRONT OUTER CROSSTUBE (SHORT 16-20") $48.00

2 1013915 FRONT OUTER CROSSTUBE (LONG 20-24") $52.00

15 2 1026834 REAR OUTER CROSSTUBE (SHORT 16-20") $48.00

2 1026835 REAR OUTER CROSSTUBE (SHORT 20-24") $48.00

16 1 1027590 CAPELLA LOWER SUPPORT PLATE RT $48.00

17 1 1027591 CAPELLA LOWER SUPPORT PLATE LT $48.00

18 2 1032491 REAR WHEEL MOUNTING BRACKET $120.00

1 1020880 KIT, COMPLETE LOWER FRAME ASS'Y (16-20" WIDE) $1,525.00

1 1020881 KIT, COMPLETE LOWER FRAME ASS'Y (20-24" WIDE) $1,525.00

NOTES: A- COLOR TO BE SPECIFIED


CAPELLA – LOWER FRAME PIN ASSEMBLY

CAPELLA LOWER FRAME PIN ASSEMBLY TABLE



2 1 1001861 WASHER FLAT USS 5/16 D 3/8 OD 7/8 THK .062 $1.50

3 1 REF FRONT OUTER CROSSTUBE (SHORT 16-20") REF

REF FRONT OUTER CROSSTUBE (LONG 20-24") REF

4 1 1033272 TUBE MOUNT FLANGED INSERT $12.00

1 1034296 KIT, COMPLETE SET OF PINS FOR ONE CHAIR (QTY 4) $56.00

NOTES:


CAPELLA – FIXED LOWER FRAME


CAPELLA FIXED LOWER FRAME TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER

UNIT





5 8 1000492 SCREW, SOCKET HEAD CAP, 1/4-20 X 2 1/2 $3.00

6 1 1013469 FRONT CROSSTUBE (16" WIDE) $97.00

1 1013471 FRONT CROSSTUBE (18" WIDE) $97.00




8 1 1013485 REAR CROSSTUBE 16" WIDE $103.00

1 1013487 REAR CROSSTUBE 18" WIDE (M) $103.00

1 1013489 REAR CROSSTUBE 20" WIDE $103.00

1 1013491 REAR CROSSTUBE 22" WIDE $103.00







15 4 1015337 5/16" NUT END CAP $2.00

16 2 1027584 SCREW, FLAT HEAD SOCKET #5/16-18 X 2 1/2 $3.00

17 1 1027590 CAPELLA LOWER SUPPORT PLATE RT $48.00

18 1 1027591 CAPELLA LOWER SUPPORT PLATE LT $48.00

19 1 1028353 FIXED DUAL PIVOT BLOCK SUPPORT $234.00


1 1028355 KIT, COMPLETE LOWER FRAME ASS'Y (16" WIDE) $1,645.00




NOTES: A- COLOR TO BE SPECIFIED


CAPELLA 45 – GROWABLE LOWER FRAME ASSEMBLY


CAPELLA 45 GROWABLE LOWER FRAME TABLE



2 4 1000034 NUT, HEX, NYLOCK 5/16-18NC $2.00


4 2 1000394 SCREW, SOCKET HEAD CAP, 5/16-18NC X 4 1/2 $3.00





9 4 1005339 SPACER, NYLON 1/4, OD .50, ID .257, THK .187 $2.00







16 2 1013907 SCREW, SOCKET SHOULDER DIA.375 X 2.25, BLK $6.00

17 2 1013911 REAR OUTER CROSSTUBE (SHORT) 16-20" WIDE $48.00

2 1013912 REAR OUTER CROSSTUBE (SHORT) 20-24" WIDE $52.00

18 2 1013913 CENTER LOWER ADJUSTMENT TUBE $85.00

19 6 1015337 5/16" NUT END CAP $2.00



22 2 1017023 FRONT OUTER CROSSTUBE (SHORT) 16-20" WIDE $48.00

2 1017024 FRONT OUTER CROSSTUBE (SHORT) 20-24" WIDE $52.00

23 2 1020790 CAPELLA SUPPORT BLOCK MACHINED $28.00

24 1 1020792 MEC-LOCK FRONT SUPPORT BRACKET $33.00

25 1 B 1020845 LOWER SUPPORT STRIP RT $45.00

26 1 B 1020855 LOWER SUPPORT STRIP LT $45.00

27 2 1020968 SPACER .316 ID X .50 OD X .25 THK $1.50

28 1 1020972 GAS CYLINDER FRONT SUPPORT BRACKET $46.00

29 1 1031594 REAR H-LINK MOUNT LOWER LT $35.00

30 1 1032009 REAR H-LINK MOUNT LOWER RT $35.00


32 4 1033272 TUBE MOUNT FLANGED INSERT $12.00

1 1020862 KIT, COMPLETE LOWER ASS'Y 16-20" (ITEMS 1-30) $1,635.00

1 1020863 KIT, COMPLETE LOWER ASS'Y 20-24" (ITEMS 1-30) $1,695.00

NOTES: A- COLOR TO BE SPECIFIED B- FOR 16-20” WIDE CHAIR AND 20-24” WIDE CHAIR


CAPELLA – GROWABLE LOWER FRAME SET UP CHART


CAPELLA 45 – GROWABLE LOWER FRAME SET UP CHART


CAPELLA – GROWABLE SEAT FRAME


CAPELLA GROWABLE SEAT FRAME TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 4 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00

2 4 1000416 SCREW SOCKET HEAD BUTTON, 1/4-20 X 1.25 $3.00

3 4 1000493 SCREW, SOCKET HEAD BUTTON 1/4-20 X 1.50 $3.00

4 4 1001391 SCREW, SOCKET HEAD BUTTON, 1/4-20NC X 3/4 $3.00

5 2 1013465 SIDE RAIL, SEAT FRAME 15-16" $75.00

2 1013492 SIDE RAIL, SEAT FRAME 17-18" $78.00

2 1013493 SIDE RAIL, SEAT FRAME 19-20" $81.00

6 4 1013930 SIDE RAIL PLUG, DIA. 1" END CAP $21.00

7 4 1021611 FLANGE BUSHING 3/8 ID X 1/2 OD X 0.250 $3.50

8 2 1026841 SEAT FRAME, MAIN CROSS (SHORT 16-20") $38.00

2 1026842 SEAT FRAME, MAIN CROSS (LONG 20-24") $38.00

9 2 1026843 SEAT FRAME - FRONT TUBE (SHORT 16-20") $55.00

2 1026851 SEAT FRAME - FRONT TUBE (LONG 20-24") $55.00

10 1 1027574 SEAT FRAME - CENTER WELDMENT $235.00

1 1020882 KIT, COMPLETE 15-16" ASSEMBLY 16-20" WIDE (ITEMS 1-10) $860.00






B5510-5532

NOTES:


CAPELLA – GROWABLE SEAT FRAME SET UP CHART


CAPELLA 45 – GROWABLE SEAT FRAME ASSEMBLY


CAPELLA 45 GROWABLE SEAT FRAME TABLE


1 8 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00

2 2 1000027 WASHER FLAT 1/4", ID .257, OD 0.50, THK .032 $2.00


4 2 1000401 WASHER FLAT 1/4", ID .257, OD 0.50, THK 0.032 $1.50



7 2 1000486 URETHANE STOPPER 1.25 $8.00

8 1 1017027 SEAT FRAME, MAIN WELDMENT RT (16-20") $245.00

1 1017032 SEAT FRAME, MAIN WELDMENT RT (20-24") $275.00

9 1 1017028 SEAT FRAME, MAIN WELDMENT LT (16-20") $245.00

1 1017033 SEAT FRAME, MAIN WELDMENT LT (20-24") $275.00

10 1 1017036 CENTER ROD, SEAT FRAME WELDMENT $230.00

1 1020864 KIT, COMPLETE ASS'Y 16-20" WIDE (ITEMS 1-9) $720.00

1 1020865 KIT, COMPLETE ASS'Y 20-24" WIDE (ITEMS 1-9) $780.00

B5545-5560

NOTES:


CAPELLA 45 – GROWABLE SEAT FRAME SET UP CHART


CAPELLA – SEAT FRAME REAR SUPPORT TUBE


CAPELLA SEATFRAME REAR SUPPORT TUBE TABLE


1 4 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00




5 2 1013920 SEAT FRAME, MAIN CROSS TUBE (SHORT) $37.00

2 1013924 SEAT FRAME, MAIN CROSS TUBE (LONG) $39.00

6 1 1013925 CENTER ROD, SEAT FRAME $68.00

7 2 1013930 SIDE RAIL PLUG, DIA. 1" END CAP $21.00

1 A 1014241 KIT,REAR SEATFRAME SUPPORT TUBE ASS'Y 16-20" (ITEM 1-7) $205.00

1 A 1014242 KIT,REAR SEATFRAME SUPPORT TUBE ASS'Y 20-24" (1TEM 1-7) $210.00

B5580-5591

NOTES: A- TO BE USED ON SEAT DEPTHS OF 18, 19 AND 20”


CAPELLA – PIVOT LINKS AND GAS CYLINDER


CAPELLA PIVOT LINKS AND GAS CYLINDER TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 2 1000008 WASHER FLAT 5/16 X 1/16 OD 1/16 THK BLK $1.50



4 1 1001163 SPACER NYLON 5/16 OD .625, ID .323 THK .187 $2.50

5 1 1005339 SPACER, NYLON 1/4, OD .50, ID .257, THK .187 $2.00



8 1 1026840 SEAT FRAME - CENTER ASS'Y REF

9 1 1027572 CAPELLA SINGLE LOWER FRAME REF

10 1 1027579 CAPELLA CURVED PIVOT LINK ASS'Y $122.00

11 2 1027584 SCREW, FLAT HEAD SOCKET #5/16-18 X 2 1/2 $3.00


13 1 A 1028301 CAPELLA DUAL PIVOT BLOCK SUPPORT $234.00

1 B 1028353 CAPELLA FIXED PIVOT BLOCK SUPPORT $234.00

B5615-5630

NOTES: A- TO BE USED ON GROWABLE WIDTH LOWER FRAME B- TO BE USED ON FIXED WIDTH LOWER FRAME


CAPELLA – PIVOT BLOCK (GROWABLE WIDTH FRAME)

CAPELLA – PIVOT BLOCK (FIXED WIDTH FRAME)


CAPELLA PIVOT BLOCK (GROWABLE WIDTH FRAME) TABLE


1 4 1025268 NYLOC SCREW, SET, CUP 10/32 X 3/16 $3.00

2 1 1027569 PIVOT SUPPORT BLOCK $158.00

3 2 1027571 CAPELLA LOWER SLIDE ROD $14.00

4 1 1028305 CAPELLA DUAL SLIDE BLOCK $48.00

B5650-5655

NOTES:

CAPELLA PIVOT BLOCK (FIXED WIDTH FRAME) TABLE


1 4 1025268 NYLOC SCREW, SET, CUP 10/32 X 3/16 $3.00

2 2 1027571 CAPELLA LOWER SLIDE ROD $14.00

3 1 1028305 CAPELLA DUAL SLIDE BLOCK $48.00

4 1 1028354 FIXED PIVOT SUPPORT BLOCK $158.00

B5685-5690

NOTES:


CAPELLA 45 – H-LINKS HARDWARE


CAPELLA 45 H-LINKS HARDWARE TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 REF CAPELLA 40 LOWER FRAME (SHORT-18) REF

2 1 REF FRONT H-LINK WELDMENT RT GEN (16-20) REF

3 1 REF REAR H-LINK ASS'Y GEN (16-20) REF

4 1 REF CAPELLA 40 SEAT FRAME 18X18 GEN ASS'Y REF


B5720-5726

NOTES:


CAPELLA 45 – FRONT H-LINK ASSEMBLY (16-20”)

CAPELLA 45 – FRONT H-LINK ASSEMBLY (20-24”)


CAPELLA 45 FRONT H-LINK ASSEMBLY (16-20”) TABLE


1 4 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00


3 1 1017055 FRONT H-LINK WELDMENT RT GEN (16-20) $165.00

4 1 1017056 FRONT H-LINK WELDMENT LT GEN (16-20) $165.00

5 1 1017183 CENTER ROD, FRONT H-LINK $55.00


1 1020866 KIT, COMPLETE ASSEMBLY 16-20" (ITEMS 1-6) $405.00

B5755-5763

NOTES:

CAPELLA 45 FRONT H-LINK ASSEMBLY (20-24”)TABLE



3 1 1017060 FRONT H-LINK WELDMENT RT GEN (20-24) $175.00

4 1 1017061 FRONT H-LINK WELDMENT LT GEN (20-24) $175.00

5 1 1017183 CENTER ROD, FRONT H-LINK $55.00



B5790-5798

NOTES:


CAPELLA 45 – REAR H-LINK ASSEMBLY (16-20”)

CAPELLA 45 – REAR H-LINK ASSEMBLY (20-24”)


CAPELLA 45 REAR H-LINK ASSEMBLY (16-20”) TABLE


1 4 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00


3 1 1017063 REAR H-LINK WELDMENT RT GEN (16-20) $155.00

4 1 1017064 REAR H-LINK WELDMENT LT GEN (16-20) $155.00

5 1 1017069 CENTER ROD, H-LINKS 16-18" WIDTHS $55.00

1 1020960 CENTER ROD, H-LINKS 18-20" WIDTHS $55.00


1 1020868 KIT, COMPLETE ASSEMBLY 16-18" WIDTHS (ITEMS 1-6) $390.00

1 1020962 KIT, COMPLETE ASSEMBLY 18-20" WIDTHS (ITEMS 1-6) $390.00

B5825-5835

NOTES:

CAPELLA 45 REAR H-LINK ASSEMBLY (20-24”) TABLE


1 4 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00


3 1 1017068 CENTER ROD, H-LINKS $55.00

4 1 1017127 REAR H-LINK WELDMENT RT GEN (20-24) $165.00

5 1 1017129 REAR H-LINK WELDMENT LT GEN (20-24) $165.00



B5860-5868

NOTES:


CAPELLA – SINGLE PIVOT GAS CYLINDER (OLD ACTUATOR)


CAPELLA SINGLE PIVOT GAS CYLINDER (OLD ACTUATOR) TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 2 1000370 SPACER NYLON O0 0.495 I0 0.316 THK 0.339 $2.50



4 2 1000488 NYLON SPACER .500 O0 X .312 I0 X .250 BLACK $3.50

5 1 1000931 NUT M-10 $2.50

6 2 1001163 SPACER NYLON 5/16 O0 .625, I0 .323 THK .187 $2.50

7 1 1001766 SPACER, NYLON 1/4 O0 .50 I0 .257 THK .125 $2.00


9 1 1013588 SHORT GAS CYLIN0ER ACTUATOR ASSY $35.00

10 1 1015340 GAS CYL 80 MM STROKE-STABILUS , 800N $180.00

1 1015339 GAS CYL 80 MM STROKE-STABILUS , 1000N $180.00

11 1 1018743 SCREW, SOCKET SHOUL0ER 0IA.312 X 1.75, BLK $5.00

12 1 1026638 HEX BOLT 5/16-18 X 3.25 $3.00


14 1 1027579 CAPELLA CURVE0 PIVOT LINK ASS'Y $122.00

B5895-5911

NOTES:


CAPELLA – SINGLE PIVOT GAS CYLINDER (NEW ACTUATOR)


CAPELLA SINGLE PIVOT GAS CYLINDER (NEW ACTUATOR) TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1000397 NUT, HEX-NYLOCK THIN, 1/4-20NC $2.00


3 2 1000503 SPACER, BUTTITE 5/16, I0 .322 O0 .422 X 1.00 LG $3.50

4 1 1000931 NUT M-10 $2.50

5 2 1001163 SPACER NYLON 5/16 O0 .625, I0 .323 THK .187 $2.50


7 1 1013691 SCREW, SOCKET HEA0 CAP, 5/16-18NC X 3.00 $3.00



9 1 1018743 SCREW, SOCKET SHOUL0ER 0IA.312 X 1.75, BLK $5.00

10 1 REF SEAT FRAME - CENTER ASS'Y REF

11 1 REF CAPELLA CURVE0 PIVOT LINK ASS'Y REF

12 1 1029645 CAST LOW FORCE ACTUATOR ASSY $42.00

13 1 1029691 NUT, HEX-NYLOCK THIN, 5/16-18NC BLK $2.00

B5930-5945

NOTES:


CAPELLA 45 – GAS CYLINDER AND POSI-LOC HARDWARE (OLD ACTUATOR)


CAPELLA 45 GAS CYLINDER AND P0SI-LOC HARDWARE (OLD ACTUATOR) TABLE


2 1 1000027 WASHER FLAT 1/4", I0 .257, O0 0.50, THK 0.062 $2.00


4 2 1000422 BOLT, HEX HEA0, 5/16-18NC X 2 1/2 $3.00


6 1 1006050 BOLT, HEX HEA0, 1/4-20NC X 2 1/2, ZINC PLATE $4.00

7 1 1012410 POSI- LOCK ASSEMBLY $155.00


9 1 1013587 BOLT, HEX HEA0, 5/16-18NC X 2 $3.00

10 1 1013588 SHORT GAS CYLIN0ER ACTUATOR ASSY $35.00

11 1 A 1015340 GAS CYL 80 MM STROKE-STABILUS , 800N $180.00

A 1015339 GAS CYL 80 MM STROKE-STABILUS , 1000N $180.00

12 1 REF CAPELLA 40 LOWER FRAME (SHORT-18) REF

13 1 REF FRONT H-LINK ASSEMBLY GEN (16-20) REF



B5965-5982

NOTES: A- 15-18” SEAT DEPTH USE 800N GAS CYLINDER

19” AND UP SEAT DEPTH USE 1000N GAS CYLINDER


CAPELLA 45 – GAS CYLINDER AND POSI-LOC HARDWARE (NEW ACTUATOR)


CAPELLA 45 GAS CYLINDER AND P0SI-LOC HARDWARE (NEW ACTUATOR) TABLE


2 1 1000027 WASHER FLAT 1/4", I0 .257, O0 0.50, THK 0.062 $2.00


4 2 1000422 BOLT, HEX HEA0, 5/16-18NC X 2 1/2 $3.00


6 1 1006050 BOLT, HEX HEA0, 1/4-20NC X 2 1/2, ZINC PLATE $4.00

7 1 1012410 IN0EX LOCK ASSEMBLY $155.00


9 1 1013587 BOLT, HEX HEA0, 5/16-18NC X 2 $3.00




12 1 REF FRONT H-LINK ASSEMBLY GEN (16-20) REF



15 1 1029645 LOW FORCE ACTUATOR ASSY $42.00

B6000-6017

NOTES:


CAPELLA 45 – FRONT SHROUD ASSEMBLY

CAPELLA 45 FRONT SHROUD ASSEMBLY TABLE


1 4 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00

2 4 1000027 WASHER .260 ID .500 OD .031 THK $2.00



5 1 1021430 CAPELLA 45 FRONT ALUMINUM SHROUD $45.00

1 1034297 KIT, COMPLETE SHROUD AND HARDWARE $58.00

NOTES:


CASTERS AND FORKS

CAPELLA – FRONT CASTER MOUNTING HARDWARE


CAPELLA FRONT CASTER MOUNTING HARDWARE TABLE



2 1 REF MAIN SIDE RAIL - WELDMENT REF

3 1 1034298 CASTER MOUNT SHORT SLEEVE-SHORT FORK RT $335.00

1 1034299 CASTER MOUNT SHORT SLEEVE-LONG FORK RT $335.00

1 1034300 CASTER MOUNT SHORT SLEEVE-XLONG FORK RT $335.00

1 1034301 CASTER MOUNT LONG SLEEVE-SHORT FORK RT $335.00

1 1034302 CASTER MOUNT LONG SLEEVE-LONG FORK RT $335.00

1 1034303 CASTER MOUNT LONG SLEEVE-XLONG FORK RT $335.00

1 1034304 CASTER MOUNT SHORT SLEEVE-SHORT FORK LT $335.00

1 1034305 CASTER MOUNT SHORT SLEEVE-LONG FORK LT $335.00

1 1034306 CASTER MOUNT SHORT SLEEVE-XLONG FORK LT $335.00

1 1034307 CASTER MOUNT LONG SLEEVE-SHORT FORK LT $335.00

1 1034308 CASTER MOUNT LONG SLEEVE-LONG FORK LT $335.00

1 1034309 CASTER MOUNT LONG SLEEVE-XLONG FORK LT $335.00


1 1034310 KIT, HARDWARE INCLUDES ITEM 1 AND 4 $9.00

NOTES:


ADJUSTABLE HEIGH FRONT CASTER MOUNT


ADJUSTABLE HEIGHT FRONT CASTER MOUNT TABLE




3 1 1000422 BOLT, HEX HEAD, 5/16-18NC X 2 1/2 $3.00

4 1 1000976 NUT. HEX-NYLOCK THIN, 1/2-20NF $2.50

5 2 1013407 BEARING ID 0.5" X 1.125 OD X .312 $10.00


7 2 1017107 WASHER FLAT ID 17/32 OD 7/8 THK .032 $1.50

8 1 A 1031018 FORK SHORT WITH STEM (13-16" STF) $90.00

1 A 1031578 FORK LONG WITH STEM (15-18" STF) $90.00

1 A 1031017 FORK X-LONG WITH STEM (16-19" STF) $90.00

9 1 1031028 VERT CLAMP CASTER MOUNT RT/LT $145.00

10 1 1031037 ADJ. CASTER SLEEVE LONG LENGTH $110.00

1 1032524 ADJ. CASTER SLEEVE SHORT LENGTH $105.00

11 1 1031039 DOME END PLUG THIN 1.187 DIA $4.00

NOTES: A- SEE PARTS LIBRARY – CASTERS AND FORKS FOR BREAKDOWN OF PARTS FOR

FORK WITH STEM


CAPELLA – ADJUSTABLE HEIGHT CASTER STF SET-UP CHART


REAR WHEELS AND MOUNTS

CAPELLA – REAR AXLE MOUNT HARDWARE


CAPELLA REAR AXLE MOUNT HARDWARE TABLE


1 1 1000920 NUT LOCK 5/8-18 $2.50


3 1 1008938 MUSHROOM QUICK REL. AXLE 7/16 DIA X 3.58 LONG $95.00

4 1 1031826 XT REAR FIXED BOLT AXLE STANDARD $38.00


6 1 1032493 XT REAR QUICK RELEASE AXLE $34.00

7 1 1032496 XT REAR FIXED BOLT AXLE - NARROW $38.00

8 2 1032801 BOLT, HEX HEAD, 7/16-20 X 3.50 , MACH $4.00

1 A 1034311 KIT, FIXED STANDARD (INCLUDES ITEMS 2, 4 AND 8) $42.00

1 A 1034312 KIT, FIXED NARROW (INCLUDES ITEMS 2, 7 AND 8) $38.00

1 A 1034313 KIT, QUICK RELEASE (INCLUDES ITEMS 6, 1 AND 3) $42.00

NOTES: A- QTY 2 REQUIRED PER CHAIR


12” REAR WHEELS 12.5” STF ASSEMBLY


12” REAR WHEELS 12.5” STF ASSEMBLY TABLE


1 2 1000370 SPACER NYLON OD 0.495 ID 0.316 THK 0.339 $2.50


3 1 1000422 BOLT, HEX HEAD, 5/16-18NC X 2 1/2 $3.00

4 1 1001358 12" REAR WHEEL ASSY 7/16" BEARING $135.00



7 1 1004117 CASTER WHEEL ASS'Y 4" URETHANE $54.00

8 1 REF MAIN SIDE RAIL RT - WELDMENT REF

9 1 1031826 XT REAR FIXED BOLT AXEL STANDARD $38.00

10 1 REF CAPELLA ANTI-TIP ASS'Y REF


12 1 1032801 BOLT, HEX HEAD, 7/16-20 X 3.50 , MACH $4.00

13 1 1034298 CASTER MOUNT SHORT SLEEVE-SHORT FORK RT $335.00

1 1034304 CASTER MOUNT SHORT SLEEVE-SHORT FORK LT $335.00

1 A 1034316 KIT, COMPLETE WHEEL AND CASTER FORK ASS'Y RT $581.50

1 A 1034450 KIT, COMPLETE WHEEL AND CASTER FORK ASS'Y LT $581.50

NOTES: A- KIT TO BE ORDERED FOR EITHER LEFT OR RIGHT SIDE SEPARATELEY


LEGREST HANGERS & SEATPAN

CAPELLA – SEAT PAN HARDWARE & HANGERS


CAPELLA SEAT PAN HARDWARE & HANGERS TABLE


1 4 1000011 SPACER 1/4 X .375 X .125 $3.50

2 6 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00

3 6 1000024 WASHER FLAT SAE 1/4, ID 17/64, OD 5/8 X 0.062 BLK $1.50


5 2 1014086 DYNAMIC DUAL LEGREST HANGER ASSY $145.00

2 1016972 DYNAMIC U-BOLT LEGREST HANGER ASSY $135.00

6 1 1017004 ADJUSTABLE SEATPAN ASS'Y WIDE TEST 18X18 REF


1 1020894 KIT, SEAT PAN HARDWARE (ITEMS 1-4) $45.00

B6350-6361

NOTES:


CAPELLA 45 – GROWABLE SEAT- PAN & HANGERS ASSEMBLY

CAPELLA AND CAPELLA 45 – SWING AWAY LEGRESTS

SEE PARTS LIBRARY – SWING AWAY LEGRESTS


CAPELLA 45 GROWABLE SEAT-PAN & HANGERS ASSEMBLY TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 4 1000011 SPACER 1/4 X .375 X .125 $3.50

2 6 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00



5 2 1016972 DYNAMIC U-BOLT HANGER ASS'Y 15-19" SEAT DEPTH $135.00

2 1017098 DYNAMIC U-BOLT HANGER ASS'Y 20-23" SEAT DEPTH $145.00

2 1014086 DYNAMIC DUAL SWING AWAY HANGER 15-19" DEPTH $145.00

2 1017099 DYNAMIC DUAL SWING AWAY HANGER 20-23" DEPTH $155.00

6 1 REF ADJUSTABLE SEATPAN ASS'Y WIDE GEN 18X18 REF


B6385-6396

NOTES:


LEGREST HANGER CAPELLA PIN STYLE


LEGREST HANGER CAPELLA PIN STYLE TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1004127 ROUND PLUG 1.00 ID (SHORT INSERT) $2.50

2 1 1021682 CAPELLA PIN STYLE HANGER RT (15-19") $84.00

1 1021681 CAPELLA PIN STYLE HANGER LT (15-19") $84.00

1 1021683 CAPELLA PIN STYLE HANGER LT (20-23") $92.00

1 1021684 CAPELLA PIN STYLE HANGER RT (20-23") $92.00

B6420-6426

NOTES:


LEGREST HANGER U-BOLT STYLE (CAPELLA / CAPELLA 45)


LEGREST HANGER U-BOLT STYLE (CAPELLA / CAPELLA 45) TABLE


1 1 1000392 ROUND PLUG TUBE, 1.00" DIA FLAT $3.00

2 1 1000757 LATCH U-BOLT $20.00

3 1 1000787 ACORN NUT, 1/4-20 STAINLESS 0.510 HIGH $6.00

4 1 1016967 DYNAMIC U-BOLT HANGER 15-19" $42.50

1 1017094 DYNAMIC U-BOLT HANGER 20-23" $52.00

1 1022174 KIT, LEGREST HANGER U-BOLT (CAPELLA), 15-19" ITEMS (1-4) $56.50

1 1022175 KIT, LEGREST HANGER U-BOLT (CAPELLA), 20-23" ITEMS (1-4) $65.00

B6455-6463

NOTES:


LEGREST HANGER DUAL SWINGAWAY (CAPELLA / CAPELLA 45)


LEGREST HANGER DUAL SWINGAWAY (CAPELLA / CAPELLA 45) TABLE


1 1 1001469 SOC HD CAP 1/4-20 X 1.0 BLK $3.00

2 1 1002783 INSERT PLUG $18.00

3 1 1010227 DUAL SWINGAWAY BASE MACHINED $35.00

4 1 1014084 DYNAMIC DUAL LEGREST HANGER WELD 15-19" $42.50

1 1017100 DYNAMIC DUAL LEGREST HANGER WELD (20-23) $52.00

1 1022181 KIT, L. HANGER D.SWINGAWAY (CAPELLA) 15-19" (ITEMS 1-4) $66.00

1 1022182 KIT, L. HANGER D.SWINGAWAY (CAPELLA) 20-23" (ITEMS 1-4) $74.60

B6490-6498

NOTES:


LEGREST SWINGAWAY PIN-STYLE


LEGREST SWINGAWAY PIN-STYLE TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1000188 ANTI-RATTLE SWINGAWAY $4.00

2 1 1000189 SPACER .375 OD X .234 ID X .343 LONG $3.00

3 2 1000410 NUT, HEX-NYLOCK THIN, #10-32NF, BLK $2.00

4 1 1001222 GLIDE PLUG .875 DIA, 0.75 SLIDE TUBE $5.00

5 1 1003726 WLDMT, FOOTREST SUPT 70, LT $48.00

1 1003727 WLDMT, FOOTREST SUPT 70, RT $48.00

1 1004893 WLDMT, FOOTREST SUPT 80, LT $48.00

1 1004892 WLDMT, FOOTREST SUPT 80, RT $48.00

6 1 1003754 TORSION SPRING RELEASE HANDLE, LT $3.00

1 1003753 TORSION SPRING RELEASE HANDLE, RT $3.00

7 1 1003761 STEP BUSING 5/16 DIA $5.00

8 2 1003762 SCREW, PHILLIPS PAN HEAD, #10-32NF X 3/4 $3.00

9 1 1003767 PULL LATCH HOUSING - LT FORMED $30.00

1 1003755 PULL LATCH HOUSING - RT FORMED $30.00

10 1 1003823 SPACER .312 OD X .214 ID X .35 LONG $3.00

11 1 1004796 RECTANGULAR VINYL GRIP .50 X .75 $5.00

1 1003733 COMPLETE, SWING AWAY PINSTYLE 70DEG RT, (ITEMS 1-12) $110.00

1 1003732 COMPLETE, SWING AWAY PINSTYLE 70DEG LT, (ITEMS 1-12) $110.00

1 1004894 COMPLETE, SWING AWAY PINSTYLE 80DEG RT, (ITEMS 1-12) $120.00

1 1004895 COMPLETE, SWING AWAY PINSTYLE 80DEG LT, (ITEMS 1-12) $120.00

B6525-6546

NOTES:


LEGREST SWINGAWAY U-BOLT


LEGREST SWINGAWAY U-BOLT TABLE




3 1 1001181 60 DEG SWINGAWAY WELDMENT $48.00

1 1000760 70 DEG SWINGAWAY WELDMENT $48.00

1 1004042 90 DEG SWINGAWAY WELDMENT $48.00


5 1 1006834 GLIDE BUSHING 1.00 TO 0.75 SIMPLE $5.00

6 1 1011822 PIVOT PLUG - NO THREAD $28.00

7 1 1011823 INSERT PLUG, SWINGAWAY LEGREST $7.30

8 1 1034456 SWINGAWAY LATCH (MACHINED) ASS'Y RT $100.00

1 1034455 SWINGAWAY LATCH (MACHINED) ASS'Y LT $100.00

1 1001179 KIT, 60 DEG UPGRADED SWINGAWAY ASS'Y RIGHT (ITEMS 1-8) $195.00

1 1001180 KIT, 60 DEG UPGRADED SWINGAWAY ASS'Y LEFT (ITEMS 1-8) $195.00

1 1000754 KIT, 70 DEG UPGRADED SWINGAWAY ASS'Y RIGHT (ITEMS 1-8) $195.00

1 1000780 KIT, 70 DEG UPGRADED SWINGAWAY ASS'Y LEFT (ITEMS 1-8) $195.00

1 1004064 KIT, 90 DEG UPGRADED SWING AWAY ASS'Y RIGHT (ITEMS 1-8) $195.00

1 1004065 KIT, 90 DEG UPGRADED SWING AWAY ASS'Y LEFT (ITEMS 1-8) $195.00

NOTES:


LEGREST SWINGAWAY U-BOLT (PEDIATRIC)


LEGREST SWINGAWAY U-BOLT (PEDIATRIC) TABLE






5 1 1006717 PED 90 DEG SWINGAWAY TUBE WELDM'T $58.00

1 1006041 PED 80 DEGREE SWINGAWAY TUBE WELDM'T $58.00

1 1006069 PED 70 DEGREE SWINGAWAY TUBE WELDM'T $58.00

6 1 1011822 PIVOT PLUG - NO THREAD $28.00


8 1 1034456 SWINGAWAY LATCH (MACHINED) ASS'Y RT $100.00

1 1034455 SWINGAWAY LATCH (MACHINED) ASS'Y LT $100.00

1 1006716 KIT, PED 90 DEG UPGRADED SWING AWAY ASS'Y RIGHT $195.00

1 1006710 KIT, PED 90 DEG UPGRADED SWING AWAY ASS'Y LEFT $195.00





NOTES:


LEGREST DUAL SWINGAWAY CENTRE-PIVOT


LEGREST DUAL SWINGAWAY CENTRE-PIVOT TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1000416 SCREW SOCKET HEAD BUTTON, 1/4-20 X 1.25 $3.00


3 1 1011822 PIVOT PLUG NON-THREADED $28.00



6 1 1010222 DUAL LATCH MAIN ASS'Y $56.00

7 1 1013938 SWINGAWAY TUBE, 60 DEG WELDMENT $45.00

1 1010228 SWINGAWAY TUBE, 70 DEG WELDMENT $45.00




1 1022186 KIT, COMPLETE 60 DEG DUAL SWINGAWAY, (ITEMS 1-8) $135.00




B6630-6646

NOTES:


LEGREST DUAL SWINGAWAY CENTRE-PIVOT PEDIATRIC


LEGREST DUAL SWINGAWAY CENTRE-PIVOT PEDIATRIC TABLE


2 3 1000027 WASHER FLAT 1/4", ID .257, OD 0.50, THK .032 $2.00

3 1 1000390 SPACER, COVERED 0.312 x 1.0 TUBE DIA. $3.50






9 1 1006053 PEDIATRIC FLIP-UP FOOTPLATE TUBE $48.00

10 1 1006054 PEDIATRIC FLIP-UP FOOTPLATE MOUNT $25.00

11 1 1006055 PEDIATRIC FLIP-UP FOOTPLATE, LEFT, SMALL $30.00

1 1006074 PEDIATRIC FLIP-UP FOOTPLATE, LEFT, MEDIUM $32.30

1 1006076 PEDIATRIC FLIP-UP FOOTPLATE, LEFT, LARGE $40.30

1 1006056 PEDIATRIC FLIP-UP FOOTPLATE, RIGHT, SMALL $30.00

1 1006075 PEDIATRIC FLIP-UP FOOTPLATE, RIGHT, MEDIUM $32.30

1 1006077 PEDIATRIC FLIP-UP FOOTPLATE, RIGHT, LARGE $40.30

12 2 1006708 SCREW, FLAT HEAD SOCKET #1/4-20 X 1.00 $3.00



15 1 1013669 PIVOT PLUG SHORT 5/16 BOLT $28.00

16 1 1020937 KIDS 90 DEG SWINGAWAY WELDMENT $45.00

1 1022189 DUAL SWINGAWAY PEDIATRIC, SM FOOTPLATE, RT (ITEMS 1-16) $232.80

1 1022190 DUAL SWINGAWAY PEDIATRIC, MD FOOTPLATE, RT (ITEMS 1-16) $238.20

1 1022191 DUAL SWINGAWAY PEDIATRIC, LG FOOTPLATE, RT (ITEMS 1-16) $245.40

1 1022192 DUAL SWINGAWAY PEDIATRIC, SM FOOTPLATE, LT (ITEMS 1-16) $232.80

1 1022193 DUAL SWINGAWAY PEDIATRIC, MD FOOTPLATE, LT (ITEMS 1-16) $238.20

1 1022194 DUAL SWINGAWAY PEDIATRIC, LG FOOTPLATE, LT (ITEMS 1-16) $245.40

B6665-6693

NOTES:


LEGREST HANGER U-BOLT STYLE, ELEVATING


LEGREST HANGER U-BOLT STYLE, ELEVATING TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1002778 ADJUSTABLE LEGREST, VERTICLE TUBE,SWINGAWAY $30.00

2 1 1000757 LATCH U-BOLT $20.00

3 1 1000787 NUT, ACORN 1/4-20 STAINLESS $6.00

4 1 1002783 ADJUSTABLE LEGREST, INSERT PLUG ROD $18.00

5 2 1000412 SCREW, SOC HD BUTTON 1/4-20 X .625, BLACK $3.00

6 1 1002782 ELEVATING LEGREST HANGER U-BOLT WELDMENT $62.50

1 1005816 ELEVATING LEGREST HANGER U-BOLT WELDMENT +4" $69.00

1 1022183 KIT, ELEVATING LEGREST HANGER U-BOLT, (ITEMS 1-7) $125.00

1 1022184 KIT, ELEVATING LEGREST HANGER U-BOLT + 4", (ITEMS 1-7) $130.00

B6700-6710

NOTES:


ELEVATING LEGREST - SEATPAN

ELEVATING LEGREST CENTER PIVOT


ELEVATING LEGREST CENTER PIVOT TABLE


1 1 1002707 SCREW, SOCKET HEAD BUTTON, 3/8-24 UNF X 1/2 $4.00


3 2 1000008 WASHER FLAT 5/16 - 11/16 OD 11/32 ID, 1/16 THK $1.50

4 3 1000027 WASHER .260 ID .500 OD .031 THK $2.00



7 2 1000411 SCREW,SOC BUTTON HEAD 1/4-20 X 0.500 $3.00



10 1 1000432 BEARING, BAL .312 CHROME $3.00



13 1 1001401 PIVOT PLUG, SWINGAWAY LEGREST 5/16 BOLT THREADED $28.00

14 1 1002710 5 LOBE HANDLE - LEGREST $34.50

15 1 1002713 SPRING, COMPRESSION .30 OD .03 WIRE $3.00

16 1 1002714 SCREW, PHILLIPS PAN HEAD, #10-32NF X 3/8 SS $3.00

17 1 1002715 RETAINING RING INTERNAL .961 $1.50

18 1 1002720 NYLINER BUSHING 1.00 ID 1.125 LG $10.00

19 1 1002723 SCREW, SOCKET HEAD CAP, 1/4-28NF X 1 $3.00

20 1 1003116 LARGE CALF PAD CURVED ASS'Y WITH COVER (16-20" WIDTHS) $84.00

1 1015364 X-LARGE CALF PAD CURVED ASS'Y WITH COVER (22" AND UP) $84.00

1 1005233 MEDIUM CALF PAD CURVED ASS'Y WITH COVER (14-16"WIDTHS) $84.00

1 1005356 SMALL CALF PAD CURVED ASS'Y WITH COVER (14-16"WIDTHS) $84.00

21 1 1004654 HINGE PLATE CALF PAD, WELDMENT $17.50

22 1 1004655 SCREW, SOCKET SHOULDER DIA.312 X .375 LG $5.00


24 1 1006852 PIVOT BRACKET EXTRUSION $35.00

25 1 1006855 PIVOT WELDMENT, 70 DEG ELEVATING $75.00

26 1 1006856 INSERT PLUG, ELEVATING LEGREST $20.00

27 1 1006858 PIVOT BUSHING, END PLUG $5.00

28 1 1006860 CALF SUPPORT BRACKET, MACHINED $40.00

29 1 1006883 PIVOT STEM, ELEVATING LEGREST ALUM $27.00

30 1 1006885 PIVOT BUSHING, ELEVATING TUBE ALUM $6.00

31 1 1006886 ELEVATING TUBE WELDMENT - LONG $85.00

1 1021599 ELEVATING TUBE-GLUED ALUM - SHORT $85.00

32 1 1031642 MAIN INDEX ROD, ELEVATING LEGREST $46.00

33 1 1032320 WASHER 0.50 ID X .625 OD X .045 THK $1.50

34 1 1034455 SWINGAWAY LATCH (MACHINED) ASS'Y LT $100.00

1 A 1006891 COMPLETE, ELEVATING LEG REST- LT - SM CALFPAD (12-14") $325.00

1 A 1006892 COMPLETE, ELEVATING LEG REST- RT - SM CALFPAD (12-14") $325.00

1 A 1021517 COMPLETE, ELEVATING LEG REST- LT - MED CALFPAD (14-16") $325.00

1 A 1021518 COMPLETE, ELEVATING LEG REST- RT - MED CALFPAD (14-16") $325.00

1 A 1006889 COMPLETE, ELEVATING LEG REST- LT - LG CALFPAD (16-20") $325.00

1 A 1006890 COMPLETE, ELEVATING LEG REST- RT - LG CALFPAD (16-20") $325.00

1 A 1021519 COMPLETE, ELEVATING LEG REST- LT - X-LG CALFPAD (22"-UP) $325.00

1 A 1021520 COMPLETE, ELEVATING LEG REST- RT - X-LG CALFPAD (22"-UP) $325.00

1 A 1028377 COMPLETE, ELEVATING LEG REST- PAIR- SM CALFPAD (12-14") $650.00

1 A 1028378 COMPLETE, ELEVATING LEG REST- PAIR- MED CALFPAD (14-16") $650.00

1 A 1028379 COMPLETE, ELEVATING LEG REST- PAIR- LG CALFPAD (16-20") $650.00

1 A 1028380 COMPLETE, ELEVATING LEG REST- PAIR- X-LG CALFPAD (22-UP") $650.00

NOTES: A- FOOTPLATE AND STEM NOT INCLUDED SEE PARTS LIBRARY – SWING AWAY LEGREST FOR AVAILABLE HANGERS


ELEVATING LEGREST DUAL SWING AWAY


ELEVATING LEGREST DUAL SWING AWAY TABLE


1 1 1002707 SCREW, SOCKET HEAD BUTTON, 3/8-24 UNF X 1/2 $4.00


3 2 1000008 WASHER 5/16 FLAT 11/16 OD 11/32 ID 11/16 THK $1.50

4 2 1000027 WASHER .260 ID .500 OD .031 THK $2.00






10 1 1000432 BEARING, BAL .312 CHROME $3.00



13 1 1001401 PIVOT PLUG, SWINGAWAY LEGREST 5/16 BOLT THREADED $28.00

14 1 1002710 5 LOBE HANDLE - LEGREST $34.50

15 1 1002713 SPRING, COMPRESSION .30 OD .03 WIRE $3.00

16 1 1002714 SCREW, PHILLIPS PAN HEAD, #10-32NF X 3/8 SS $3.00

17 1 1002715 RETAINING RING INTERNAL .961 $1.50

18 1 1002720 NYLINER BUSHING 1.00 ID 1.125 LG $10.00

19 1 1002723 SCREW, SOCKET HEAD CAP, 1/4-28NF X 1 $3.00

20 1 1003116 LARGE CALF PAD CURVED ASS'Y WITH COVER (16-20" WIDTHS) $84.00

1 1015364 X-LARGE CALF PAD CURVED ASS'Y WITH COVER (22" AND UP) $84.00

1 1005233 MEDIUM CALF PAD CURVED ASS'Y WITH COVER (14-16"WIDTHS) $84.00

1 1005356 SMALL CALF PAD CURVED ASS'Y WITH COVER (14-16"WIDTHS) $84.00

21 1 1004654 HINGE PLATE CALF PAD, WELDMENT $17.50



24 1 1006852 PIVOT BRACKET EXTRUSION $35.00

25 1 1006856 INSERT PLUG, ELEVATING LEGREST $20.00

26 1 1006858 PIVOT BUSHING, END PLUG $5.00

27 1 1006860 CALF SUPPORT BRACKET, MACHINED $40.00

28 1 1006883 PIVOT STEM, ELEVATING LEGREST ALUM $27.00

29 1 1006885 PIVOT BUSHING, ELEVATING TUBE ALUM $6.00

30 1 1006886 ELEVATING TUBE WELDMENT - LONG $85.00

1 1021599 ELEVATING TUBE-GLUED ALUM - SHORT $85.00


32 1 1014381 DUAL ELEVATING PIVOT WELD $75.00

33 1 1031642 MAIN INDEX ROD, ELEVATING LEGREST $46.00

34 1 1032320 WASHER 0.50 ID X .625 OD X .045 THK $1.50

TABLE CONTINUED ON NEXT PAGE


ELEVATING LEGREST DUAL SWING AWAY TABLE (CONTINUED)


1 A 1021522 KIT, DUAL, ELEVATING LEG REST- LT - SM CALFPAD (12-14") $365.00

1 A 1021523 KIT, DUAL, ELEVATING LEG REST- RT - SM CALFPAD (12-14") $365.00

1 A 1021524 KIT, DUAL, ELEVATING LEG REST- LT - MED CALFPAD (14-16") $365.00

1 A 1021525 KIT, DUAL, ELEVATING LEG REST- RT - MED CALFPAD (14-16") $365.00

1 A 1021526 KIT, DUAL, ELEVATING LEG REST- LT - LG CALFPAD (16-20") $365.00

1 A 1021527 KIT, DUAL, ELEVATING LEG REST- RT - LG CALFPAD (16-20") $365.00

1 A 1021528 KIT, DUAL, ELEVATING LEG REST- LT - X-LG CALFPAD (22"-UP) $365.00

1 A 1021529 KIT, DUAL, ELEVATING LEG REST- RT - X-LG CALFPAD (22"-UP) $365.00

1 A 1028381 KIT, DUAL, ELEVATING LEG REST- PAIR - SM CALFPAD (12-14") $730.00

1 A 1028382 KIT, DUAL, ELEVATING LEG REST- PAIR - MED CALFPAD (14-16") $730.00

1 A 1028383 KIT, DUAL, ELEVATING LEG REST- PAIR - LG CALFPAD (16-20") $730.00

1 A 1028384 KIT, DUAL, ELEVATING LEG REST- PAIR - X-LG CALFPAD (22-UP") $730.00

1 A 1028648 KIT, DUAL, SHORT ELEV LEG REST- LT - SM CALFPAD (12-14") $365.00

1 A 1028649 KIT, DUAL, SHORT ELEV LEG REST- RT - SM CALFPAD (12-14") $365.00

1 A 1028650 KIT, DUAL, SHORT ELEV LEG REST- LT - MED CALFPAD (14-16") $365.00

1 A 1028651 KIT, DUAL, SHORT ELEV LEG REST- RT - MED CALFPAD (14-16") $365.00

1 A 1028652 KIT, DUAL, SHORT ELEV LEG REST- LT - LG CALFPAD (16-20") $365.00

1 A 1028653 KIT, DUAL, SHORT ELEV LEG REST- RT - LG CALFPAD (16-20") $365.00

1 A 1028654 KIT, DUAL, SHORT ELEV LEG REST- LT - X-LG CALFPAD (22"-UP) $365.00

1 A 1028655 KIT, DUAL, SHORT ELEV LEG REST- RT - X-LG CALFPAD (22"-UP) $365.00

1 A 1028657 KIT, DUAL, SHORT ELEV LEG REST- PAIR - SM CALFPAD (12-14") $730.00

1 A 1028658 KIT, DUAL, SHORT ELEV LEG REST- PAIR - MED CALFPAD (14-16") $730.00

1 A 1028659 KIT, DUAL, SHORT ELEV LEG REST- PAIR - LG CALFPAD (16-20") $730.00

1 A 1028660 KIT, DUAL, SHORT ELEV LEG REST- PAIR - X-LG CALFPAD (22-UP") $730.00

NOTES: A- FOOTPLATE AND STEM NOT INCLUDED SEE LIBRARY – SWING AWAY LEGREST FOR AVAILABLE HANGERS


CAPELLA SEAT PAN 1” RISER BLOCK


CAPELLA SEAT PAN 1” RISER BLOCK TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 2 4 1000011 SPACER 1/4 X .375 X .125 $3.50

3 12 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00




7 2 1014086 DYNAMIC DUAL LEGREST HANGER ASSY $145.00

8 1 1014243 SEATFRAME SUPPORT TUBE GEN ASS'Y REF

9 1 1017004 ADJUSTABLE SEATPAN ASS'Y WIDE TEST 18X18 REF

10 2 1021408 CAPELLA SIDE 1" RISER BLOCK RAIL 15-16" $36.00

2 1021409 CAPELLA SIDE 1" RISER BLOCK RAIL 17-18" $36.00

2 1021410 CAPELLA SIDE 1" RISER BLOCK RAIL 19-20" $36.00

11 6 1021411 RISER 1" SPACER ROD $15.00


1 1021417 KIT, 11 RISER BLOCKS , SEAT DEPTH 15-161 $155.00



B6920-6938

NOTES:


ADJUSTABLE SEATPANS


ADJUSTABLE SEATPANS TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 8 1000397 NUT, HEX-NYLOCK THIN, 1/4-20NC $2.00


3 1 REF MAIN SEAT BASE PLATE REF

4 2 REF FRONT SLIDE PLATE REF

5 2 REF REAR SLIDE PLATE REF

1 A 1018973 KIT, ADJUSTABLE SEATPAN (16-20" WIDE X 15-16" DEEP) $370.00






B6955-6967

NOTES: A- KIT INCLUDES ALL HARDWARE AND VELCRO


FIXED SEATPANS


FIXED SEATPANS TABLE

PART NO. DESCRIPTION PRICE/ PER UNIT PART NO. DESCRIPTION PRICE/ PER UNIT 1000520 SEATPAN 15X15 $280.00 1000531 SEATPAN 20X15 $280.00

1000521 SEATPAN 15X16 $280.00 1000530 SEATPAN 20X16 $280.00





1005256 SEATPAN 20X21 $280.00




1000518 SEATPAN 16X18 $280.00






1001326 SEATPAN 21X20 $280.00


1000511 SEATPAN 17X16 $280.00






1001332 SEATPAN 22X20 $280.00



1000140 SEATPAN 18X17 $280.00




1005292 SEATPAN 18X21 $280.00



1004953 SEATPAN 24X19 $280.00




1000528 SEATPAN 19X18 $280.00

1000529 SEATPAN 19X19 $280.00

1001337 SEATPAN 19X20 $280.00

1006921 SEATPAN 19X21 $280.00

NOTES: A- ALL SEATPANS COME WITH VELCRO ATTACHED (NOT SHOWN)


PUSH CANES

CAPELLA 45 – PUSH CANE MOUNTING HARDWARE – FIXED

CAPELLA 45 PUSH CANE MOUNTING HARDWARE – FIXED TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 5 1000390 SPACER, COVERED 0.312 x 1.0 TUBE DIA. $3.50



4 1 1013541 DYNAMIC BACK CANE BRACKETS $35.00

5 1 1014244 BACK CANE BRACKETS C'SINK RT $42.00

1 1014246 BACK CANE BRACKETS C'SINK LT $42.00

6 1 REF PUSH BAR BACK 8 DEG BEND FIXED LO RT REF

7 1 REF SEAT FRAME, MAIN WELDMENT RT (16-20") REF

1 1026701 KIT, FIXED MOUNTING BRACKET KIT RT $86.00

1 1026702 KIT, FIXED MOUNTING BRACKET KIT LT $86.00

B6990-7001

NOTES: USED FOR FIXED AND RECLINE BACK CANES KIT DOES NOT INCLUDE SEAT RAIL


CAPELLA 45 – PUSH CANE MOUNTING HARDWARE – FOLD DOWN

CAPELLA 45 PUSH CANE MOUNTING HARDWARE – FOLD DOWN TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1000024 WASHER FLAT SAE 1/4, ID 17/64, OD 5/8 X 0.062 BLK $1.50




5 1 1008411 NUT, HEX-NYLOCK, #10-24, BLK $2.00



1 1014246 BACK CANE BRACKETS C'SINK LT $42.00

8 1 REF SEAT FRAME, MAIN WELDMENT RT (16-20") REF

9 1 1026662 SCREW, SOCKET SHOULDER DIA.250 X 1.50 LG $48.00

1 1026703 KIT, FOLD MOUNTING BRACKET COMPLETE RT $92.00

1 1026704 KIT, FOLD MOUNTING BRACKET COMPLETE LT $92.00

B7025-7038

NOTES: KIT DOES NOT INCLUDE SEAT RAIL


CAPELLA PUSH CANE MOUNTING HARDWARE – FLIP BACK ARM


CAPELLA PUSH CANE MOUNTING HARDWARE – FLIP BACK ARM TABLE


1 6 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00




5 1 REF SIDE RAIL, SEAT FRAME 17-18" REF

6 1 1013639 DYNAMIC FLIPUP BACK CANE BRACKETS $42.00

7 1 1013644 RECEIVER MOUNT BLOCK $20.00

8 1 1013645 RECEIVER RT, FLIPUP ARM $67.00

1 1013646 RECEIVER LT, FLIPUP ARM $67.00

9 1 REF FIXED FLIP-UP DYNAMIC ARM-REST ASSY RT REF

1 REF FIXED FLIP-UP DYNAMIC ARM-REST ASSY LT REF

10 1 1014245 FLIP-UP BACK CANE BRACKETS C'SINK RT $42.00

1 1014247 FLIP-UP BACK CANE BRACKETS C'SINK LT $42.00


12 1 1025226 FLIP BACK SPACER DISK LONG $8.00

1 A 1020898 KIT, MOUNT BRACKET AND HARDWARE RT $215.00

1 A 1020899 KIT, MOUNT BRACKET AND HARDWARE LT $215.00

NOTES: A- ARMS DO NOT COME WITH KIT AND SEAT RAIL UNAVAILABLE FOR FOLD-DOWN AND RECLINE BACK CANES


PUSH BAR HI/LO (FIXED – FOLD DOWN)


PUSH BAR HI/LO (FIXED – FOLD DOWN) TABLE



2 1 1016809 CENTER ROD, PUSH BAR $64.00

3 1 1016933 PUSH BAR BACK FIXED/FOLD HI 25" LT (16-20" WIDE) $86.00

1 1016954 PUSH BAR BACK FIXED/FOLD HI 25" LT (20-24" WIDE) $92.00

1 1016935 PUSH BAR BACK FIXED/FOLD LO 20" LT (16-20" WIDE) $86.00

1 1016956 PUSH BAR BACK FIXED/FOLD LO 20" LT (20-24" WIDE) $92.00

4 1 1016932 PUSH BAR BACK FIXED/FOLD HI 25" RT (16-20" WIDE) $86.00

1 1016953 PUSH BAR BACK FIXED/FOLD HI 25" RT (20-24" WIDE) $92.00

1 1016934 PUSH BAR BACK FIXED/FOLD LO 20" RT (16-20" WIDE) $86.00

1 1016955 PUSH BAR BACK FIXED/FOLD LO 20" RT (20-24" WIDE) $92.00

1 A 1016931 KIT, PUSH BAR BACK FIXED HI (16-20") (ITEMS 1-4) $256.00

1 A 1016361 KIT, PUSH BAR BACK FIXED LO (16-20") (ITEMS 1-4) $251.00

1 A 1016366 KIT, PUSH BAR BACK FIXED HI (20 -24") (ITEMS 1-4) $266.00

1 A 1016367 KIT, PUSH BAR BACK FIXED LO (20-24") (ITEMS 1-4) $261.00

1 A 1020903 KIT, PUSH BAR BACK FOLD HI (16-20") (ITEMS 1-4) $326.00

1 A 1020904 KIT, PUSH BAR BACK FOLD LO (16-20") (ITEMS 1-4) $321.00

1 A 1020905 KIT, PUSH BAR BACK FOLD HI (20 -24") (ITEMS 1-4) $336.00

1 A 1020906 KIT, PUSH BAR BACK FOLD LO (20-24") (ITEMS 1-4) $331.00

1 B 1021530 1" DIA. PUSH BAR FOAM $15.00

B7095-7116

NOTES: A- KIT INCLUDES FOAM WITH PUSH BAR

NOT SHOWN ON ASSEMBLY – 2 REQUIRED PER PUSH BAR


PUSH BAR HI/LO (FIXED – FOLD DOWN) MOUNTING HARWARE

PUSH BAR HI/LO (FIXED - FOLD DOWN) MOUNTING HARDWARE TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1006071 COMPRESSION SPRING O.D.0.6", $8.00

2 1 1005381 LOCK DEVICE PIN $15.00

3 1 1005382 VINYL ROUND CAP, DIA. 0.25, LG 0.50 $3.00

4 1 1006067 BACKPOST LOCK DEVICE PLUG $34.00

5 1 REF PUSH BAR BACK FIXED/FOLD LO RT REF

1 A 1020909 KIT, CANE FOLD DOWN HARDWARE (ITEMS 1-4) $55.00

B7130-7137

NOTES: A - TWO REQUIRED PER CHAIR


PUSH CANE HI/LO (FIXED – FOLD DOWN)


PUSH CANE HI/LO (FIXED – FOLD DOWN) TABLE


1 1 1006071 COMPRESSION SPRING O.D.0.6", $8.00

2 1 1005381 LOCK DEVICE PIN $15.00

3 1 1005382 VINYL ROUND CAP, DIA. 0.25, LG 0.50 $3.00

4 1 1005904 HAND GRIP 1" DIA $8.00

5 1 1006067 BACKPOST LOCK DEVICE PLUG $34.00

6 1 1013545 FOLDDOWN BACKCANE HI $80.00

1 1013544 FOLDDOWN BACKCANE LO $76.00

1 A 1020910 KIT, PUSH CANE HI FIXED COMPLETE (ITEMS 4,6) $84.00

1 A 1020911 KIT, PUSH CANE HI FOLD DOWN COMPLETE (ITEM 1-6) $116.00

1 A 1020912 KIT, PUSH CANE LO FIXED COMPLETE (ITEMS 4,6) $80.00

1 A 1020913 KIT, PUSH CANE LO FOLD DOWN COMPLETE (ITEM 1-6) $120.00

B7165-7177

NOTES: A- 2 REQUIRED PER CHAIR


1” DUAL PUSHCANE HI/LO (FIXED – FOLD DOWN)


1” DUAL PUSHCANE HI/LO (FIXED – FOLD DOWN) TABLE


1 1 1001156 UPPER CROSS BRACE, BACK, 16" WIDE $42.00

1001157 UPPER CROSS BRACE, BACK, 17" WIDE $44.00








2 2 1001212 SCREW, SOCKET HEAD BUTTON, #10-32NF X 1/2 $3.00

3 2 1003783 7/8" TUBE HAND GRIP $5.00

4 1 1028424 1" DUAL CANE LOW RT WELDMENT $104.00

1 1028425 1" DUAL CANE HI RT WELDMENT $110.00

5 1 1028426 1" DUAL CANE LOW LT WELDMENT $104.00

1 1028427 1" DUAL CANE HI LT WELDMENT $110.00

6 1 A 1000819 CROSSBRACE FOAM BAR GRIP

1028433 DUAL PUSH CANE BACK LOW 16" WIDE (COMPLETE) $248.00









1028443 DUAL PUSH CANE BACK HI 16" WIDE (COMPLETE) $248.00









B7200-7237

NOTES: A- FOAM GRIP NOT SHOWN (SPECIFY WIDTH)


ADJUSTABLE HINGE PUSH BAR HI/LO


ADJUSTABLE HINGE PUSH BAR HI/LO TABLE

ITEM QTY NOTES PART NO. DESCRIPTION


2 2 1010580 PUSHBAR HINGE ASSY $60.00

3 2 1013637 DYNAMIC HINGED CANE VERTICLE LOW $51.00

2 1019580 DYNAMIC HINGED CANE VERTICLE HI $56.00

4 1 1013726 STROLLER PULL HANDLE ASS'Y $43.00

5 2 1016807 ADJUSTABLE HINGE PUSHBAR 16-20" $45.00

2 1016823 ADJUSTABLE HINGE PUSHBAR 20-24" $48.00

6 1 1016809 CENTER ROD, PUSH BAR $64.00

7 1 B 1021530 1" DIA. PUSH BAR FOAM $15.00

1 A 1016810 KIT, ADJUSTABLE HINGE PUSHBAR 16-20" LOW (ITEMS 1-7) $405.00

1 A 1019581 KIT, ADJUSTABLE HINGE PUSHBAR 16-20" HI (ITEMS 1-7) $410.00

1 A 1016816 KIT, ADJUSTABLE HINGE PUSHBAR 20-24" LOW (ITEMS 1-7) $415.00

1 A 1019587 KIT, ADJUSTABLE HINGE PUSHBAR 20-24" HI (ITEMS 1-7) $420.00

B7245-7259

NOTES: A- INCLUDES FOAM, DOES NOT INCLUDE TRIGGER HANDLE B- NOT SHOWN ON ASSEMBLY – 2 REQUIRED PER PUSH BAR


CAPELLA 45 – ANGLE ADJUSTABLE RECLINE PUSH BAR


CAPELLA 45 ANGLE ADJUSTABLE RECLINE PUSH BAR TABLE


1 4 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00

2 2 1000031 WASHER, 5/16" ID .312 OD .625 $1.50

3 1 1000034 NUT, HEX, NYLOCK 5/16-18NC $2.00





8 1 1013539 500N STABILUS 60MM STROKE $175.00


10 2 1013586 SPACER, NYLON 5/16 OD .500 ID .316 THK .75 $2.00

11 2 1013587 BOLT, HEX HEAD, 5/16-18NC X 2 $3.00

12 1 1013588 SHORT GAS CYLINDER ACTUATOR ASSY $35.00


14 1 1014246 BACK CANE BRACKETS C'SINK LT $42.00


16 1 REF RECLINE BACK GEN FRONT CROSSTUBE REF

1020923 RECLINE GEN FRONT CROSSTUBE 16" $140.00









17 1 REF SEAT FRAME CROSSTUBES GEN ASSY 15-16" REF

18 1 1016912 ACTUATOR COVER - RECLINE $23.00


20 1 REF PUSH BAR BACK 8 DEG BEND REF

21 1 REF RECLINE BACK GEN CROSSBRACE WELD REF

1020768 RECLINE BACK CROSSBRACE WELD 16" WIDE $135.00









22 2 1020788 INSERT PLUG RECLINE $26.00

23 1 A 1021530 1" DIA. PUSHBAR FOAM $15.00

1 B 1020914 KIT, RECLINE BACK COMPLETE 16" WIDE (ITEMS 1-16,18,19,21-23) $740.00









B7280-7331

NOTES: A- NOT SHOWN ON ASSEMBLY B- KIT DOES NOT INCLUDE RECLINE TRIGGER HANDLE AND CABLE


CAPELLA 45 – RECLINE BACK FRONT CROSSTUBE


CAPELLA 45 RECLINE BACK FRONT CROSSTUBE TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 2 1001391 SCREW, SOCKET HEAD BUTTON, 1/4-20NC X 3/4 $3.00

2 1 REF RECLINE BACK GEN FRONT CROSSTUBE REF

1 1016885 RECLINE BACK 16" FRONT CROSSTUBE $78.00









3 2 1016907 ENDPLUG TUBE MOUNT FLAT $33.00

B7340-7353

NOTES:


ANTI-TIPPERS

CAPELLA QUICK FLIP ANTI-TIPPERS

CAPELLA QUICK FLIP ANTI-TIPPERS TABLE




3 1 1014146 SHORT-BENT QUICK FLIP ANTI-TIP ASSY $190.00

4 1 REF REAR WHEEL MOUNTING BRACKET REF

5 1 A 1032497 XT ANTI-TIP MOUNT BRACKET $83.00

1 1034315 KIT, ANTI-TIP (ITEMS 1,2,3 AND 5) $230.00

NOTES: A- TWO UNITS REQUIRED PER CHAIR


ARMRESTS

T-STYLE PIN RELEASE GENERAL ASSEMBLY

T-STYLE PIN RELEASE GENERAL ASSEMBLY TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 REF ARM-REST TOP GEN ASS'Y REF

2 1 REF ARM-REST BASE HARDWARE ASSY REF

3 1 REF ARM-REST MID GEN ASS'Y REF

B7410-7414

NOTES:


CAPELLA – T-STYLE ARM BASE MOUNT ASSEMBLY

CAPELLA 45 – T-STYLE ARM BASE MOUNT ASSEMBLY


CAPELLA T-STYLE ARM BASE MOUNT TABLE


2 3 1000027 WASHER FLAT 1/41, ID .257, OD 0.50, THK 0.032 $2.00



5 2 1001469 SOC HD CAP 1/4-20 X 1.0 BLK $3.00

6 1 1011236 ARM-REST BASE 3-HOLE $44.00

7 1 1015355 BACK STOP- ARM BASE 3-POINT $40.00

8 1 1015357 SEATRAIL INSERT PLUG $15.00

1 A 1017073 KIT, T-STYLE ARM BASE 3-HOLE PLASTIC (ITEMS 1-8) $110.00

B7445-7455

NOTES: A- TWO UNITS REQUIRED PER CHAIR

CAPELLA 45 T-STYLE ARM BASE MOUNT ASSEMBLY TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1015356 T-STYLE ARMBASE MOUNT ASSY $60.00

2 1 REF SEAT FRAME, MAIN WELDMENT RT (16-201) REF

3 1 REF SEAT FRAME, MAIN WELDMENT LT (16-201) REF

4 1 REF CENTER ROD, SEAT FRAME WELDMENT REF

B7480-7485

NOTES:


ARMREST TOP T-STYLE PIN RELEASE ADJUSTIBLE


ARMREST TOP T-STYLE PIN RELEASE ADJUSTIBLE TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 2 1000421 PLUG, UNIVERSAL BLACK 0.875 ROUND $2.50

2 2 1003348 SCREW, SOCKET HEAD CAP, 10-32NF X 1 1/8 $5.00

3 2 1003052 SCREW, PHILLIPS PAN HEAD, #10-32NF X 1 $3.00

4 1 1005002 DESK LENGTH VINYL ARMPAD $30.00

1 1004179 ARMPAD FULL LENGTH VINYL $35.00

1 1002538 CURVED ARMPAD WITH INSERT RT $75.00

1 1002539 CURVED ARMPAD WITH INSERT LT $75.00

1 1012656 WIDE GEL ARMPAD RT OVERMOLD $100.00

1 1012663 WIDE GEL ARMPAD LT OVERMOLD $100.00

5 1 1006101 ARM-REST TOP, DESK LENGTH $22.00

1 1006109 ARM-REST TOP, ARMPAD TUBE FULL LENGTH $23.00

1 1005057 ARM-REST TOP, ARMPAD CURVED TUBE FULL LENGTH $24.00

6 1 1008412 ARMTOP INSERT PLUG $15.00

7 1 1010521 ARM-REST TOP, SLIDE TUBE (ADULT) $32.00

1 A 1010524 COMPLETE, ARM-REST TOP DESK LENGTH RT $104.00

1 A 1010525 COMPLETE, ARM-REST TOP DESK LENGTH LT $104.00

1 A 1010526 COMPLETE, ARM-REST TOP FULL LENGTH RT $110.00

1 A 1010527 COMPLETE, ARM-REST TOP FULL LENGTH LT $110.00

1 A 1010528 COMPLETE, ARM-REST TOP CURVED RT $147.00

1 A 1010529 COMPLETE, ARM-REST TOP CURVED LT $147.00

1 A 1012660 COMPLETE, ARM-REST TOP WIDE GEL RT $169.00

1 A 1012664 COMPLETE, ARM-REST TOP WIDE GEL LT $169.00

B7515-7538

NOTES: A- EACH ASSEMBLY INCLUDES THE CORRESPONDING ARMPAD AND ARM-REST TOP


ARMREST TOP, CURVED – HALF LAPTRAY ASSEMBLY


ARMREST TOP, CURVED - HALF LAPTRAY ASSEMBLY TABLE




4 1 1001469 SOC HD CAP 1/4-20 X 1.0 BLK $3.00

5 2 1001691 NYLON SPACER .370 DIA X .195 ID $2.50

6 2 1001806 POP RIVET 3/161 $3.00

7 1 1002538 ARMPAD WITH INSERT RT $75.00

1 1002539 ARMPAD WITH INSERT LT $75.00



10 1 1008851 BRACKET GUIDE PIN $12.00

11 1 1019530 CURVED ARM TOP TUBE - HALF LAPTRAY $24.00


1 1019533 COMPLETE, ARM-REST TOP CURVED HALF LAPTRAY LT $175.00

1 1019532 COMPLETE, ARM-REST TOP CURVED HALF LAPTRAY RT $175.00

B7550-7566

NOTES: FULL LENGTH TUBE


ARMREST TOP -– HALF LAPTRAY ASSEMBLY


ARMREST TOP - HALF LAPTRAY ASSEMBLY TABLE



3 1 1004179 ARMPAD FULL LENGTH VINYL $35.00


5 1 1001469 SOC HD CAP 1/4-20 X 1.0 BLK $3.00

6 2 1001691 NYLON SPACER .370 DIA X .195 ID $2.50

7 2 1001806 POP RIVET 3/161 $3.00



10 1 1008851 BRACKET GUIDE PIN $12.00


12 1 1019540 HALF LAP FULL LENGTH TOP TUBE $23.00

1 1019539 COMPLETE, ARM-REST TOP FULL LENGTH HALF LAPTRAY LT $139.00

1 1019538 COMPLETE, ARM-REST TOP FULL LENGTH HALF LAPTRAY RT $139.00

B7585-7600

NOTES: FULL LENGTH TUBE


ARMREST TOP FIXED HEIGHT T-STYLE


ARMREST TOP FIXED HEIGHT T-STYLE TABLE



3 1 1004179 ARMPAD FULL LENGTH VYNIL $35.00


5 2 1000226 SCREW SOC BUTTON HEAD #10-32 X 0.375 $3.00

6 6 1000410 NUT, HEX-NYLOCK THIN, #10-32NF $2.00

7 1 1008109 T-ARM RELEASE LEVER INJECTED $25.00

8 2 1010503 ARM-REST MID, SPLIT TUBE CLAMP RT $12.00

9 1 1010508 ADULT T-ATM TRANSFER TUBE $35.00

10 1 1010509 ARM-REST MID, ARM GUARD ADULT $24.00

11 1 1010511 ARM-REST MID, ARM RELEASE LEVER PIN $7.00

12 2 1010513 ARM-REST MID, SPLIT TUBE CLAMP LT $12.00

13 1 1010904 SPRING, COMP .240 OD X .690 LG .035 WIRE $3.00

14 2 1013180 #10-32 x 0.375 SHCS $3.00

15 1 1014272 FIXED T-STYLE ARM-REST WELDMENT $94.00

1 1014170 COMPLETE ARMREST FIXED HEIGHT T-STYLE LT $281.00

1 1025306 COMPLETE ARMREST FIXED HEIGHT T-STYLE RT $281.00

B7620-7638

NOTES:


ARMREST MID T-STYLE PIN RELEASE (ADULT SIZE) LT/RT ASSEMBLY


ARMREST MID T-STYLE PIN RELEASE (ADULT SIZE) LT/RT ASSEMBLY TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 2 1010523 SCREW, FLAT HEAD SOCKET #10/32NF X 1/2 $3.00




5 1 1010502 ARM-REST MID, MAIN TUBE ADULT $37.50


7 2 1010504 ARM-REST MID, GLIDE INSERT $10.00

8 1 1010508 ADULT T-ATM TRANSFER TUBE $35.00

9 1 1010509 ARM-REST MID, ARM GUARD ADULT $24.00



12 1 1010514 ARM-REST MID, PIN LOCK ASS'Y $30.00


14 2 1013180 #10-32 x 0.375 SHCS $3.00

1 1010902 COMPLETE ARM REST MID T-STYLE PIN RELEASE $233.00

B7655-7671

NOTES:


ARMREST MID T-STYLE PIN RELEASE (CHILD SIZE) LT/RT ASSEMBLY


ARMREST MID T-STYLE PIN RELEASE (CHILD SIZE) LT/RT ASSEMBLY TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 2 1010523 SCREW, FLAT HEAD SOCKET #10/32NF X 1/2 $3.00





6 2 1010504 ARM-REST MID, GLIDE INSERT $10.00



9 1 1010514 ARM-REST MID, PIN LOCK ASS'Y $30.00

10 1 1010532 ARM-REST MID, MAIN TUBE CHILD $37.50

11 1 1010533 ARM-REST MID, ARM GUARD CHILD $22.00

12 1 1010633 CHILD T-ATM TRANSFER TUBE $29.50


14 2 1013180 #10-32 x 0.375 SHCS $3.00

1 1010903 COMPLETE ARM REST MID T-STYLE PIN RELEASE (CHILD SIZE) $227.00

B7690-7706

NOTES:


ARMREST TOP HEIGHT ADJ WITH KNOB ALUMINUM VINYL


ARMREST TOP HEIGHT ADJ WITH KNOB ALUMINUM VINYL TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1004922 ARMREST SLIDE BAR -RIGHT, ASS'Y - FOR VINYL ARMPAD $94.00

1 1004927 ARMREST SLIDE BAR -LEFT, ASS'Y - FOR VINYL ARMPAD $94.00

2 1 1004179 FULL LENGTH ARMPAD 141 VINYL $35.00

3 2 1002573 SCREW, PHILLIPS PAN HD #10-32 X 1 1/4 ZINC $3.00

4 2 1000421 PLUG, UNIVERSAL BLACK 0.875 ROUND $2.50

1 1004930 COMPLETE, ARMREST TOP, KNOB FULL LENGTH RIGHT $126.00

1 1004931 COMPLETE, ARMREST TOP, KNOB FULL LENGTH LEFT $126.00

B7725-7733

NOTES:


ARMREST TOP HEIGHT ADJ WITH KNOB STEEL GEL


ARMREST TOP HEIGHT ADJ WITH KNOB STEEL GEL TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1002570 GEL ARM TUBE, WELDMENT LT $115.00

1 1002569 GEL ARM TUBE, WELDMENT RT $115.00

1 1008273 FULL ARM TUBE, WELDMENT LT $115.00

1 1008272 FULL ARM TUBE, WELDMENT RT $115.00



4 1 1002538 CURVED GEL ARMPAD WITH INSERT, RT $75.00

1 1002539 CURVED GEL ARMPAD WITH INSERT, LT $75.00

B7760-7769

NOTES:


ARMREST MID T-STYLE KNOB


ARMREST MID T-STYLE KNOB TABLE


1 1 1000065 KNOB, SMALL, BALL PLUNGER ASS'Y $30.00

2 4 1000228 STEEL TUBULAR RIVET 3/16 X 3/8 $3.00


4 1 1001726 RELEASE LEVER $12.00


6 1 1002739 INNER, FIXED TUBE WELDMENT, RIGHT $135.00

1 1003054 INNER, FIXED TUBE WELDMENT, LEFT $135.00

7 1 1013693 ARM GUARD ADULT 4-HOLE $64.00

1 1015322 KIT, COMPLETE ARM REST MID T-STYLE KNOB RT $230.00

1 1015323 KIT, COMPLETE ARM REST MID T-STYLE KNOB LT $230.00

NOTES:


ARMREST FLIP-BACK HEIGHT ADJ. CAPELLA


ARMREST FLIP-BACK HEIGHT ADJ. CAPELLA TABLE




3 1 1004179 ARMPAD FULL LENGTH VINYL $35.00

4 2 1001222 GLIDE PLUG .875 DIA, 0.75 SLIDE TUBE $5.00

5 1 1001295 ROUND GUIDED END PLUG 0.75 DIA 16 GAUGE $5.00

6 1 1001724 BULLET FLIP-BACK ARM $5.00

7 1 1001725 SPACER BLOCK, RELEASE LEVER $8.00

8 1 1001726 RELEASE LEVER $12.00


10 1 1003413 TAPPING SCREW 1/4-20 X 1.25 $3.00

11 1 1019604 ADJ. FLIP-UP CAPELLA ARM-REST WLDT RT $150.00

1 1019605 ADJ. FLIP-UP CAPELLA ARM-REST WLDT LT $150.00

12 1 1019612 ARMTOP SLIDE WELDMENT $65.00

1 1020827 CURVED GEL ARMTOP SLIDE WELDMENT $65.00

13 1 1030464 RELEASE PLUNGER M10-1.0 $15.00

1 1019601 KIT, COMPLETE FLIP-BACK HEIGHT ADJ VINYL CAPELLA RT $259.00

1 1019602 KIT, COMPLETE FLIP-BACK HEIGHT ADJ VINYL CAPELLA LT $259.00

1 1020824 KIT, COMPLETE FLIP-BACK HEIGHT ADJ CURVED CAPELLA LT $279.00

1 1020825 KIT, COMPLETE FLIP-BACK HEIGHT ADJ CURVED CAPELLA RT $279.00

NOTES:


WHEEL LOCKS

CAPELLA – WHEEL LOCK REAR WHEEL


CAPELLA WHEEL LOCK REAR WHEEL TABLE



2 1 REF MAIN SIDE RAIL RT - WELDMENT REF

3 1 REF PIVOT SUPPORT BRACKET RT REF

4 1 REF FRONT OUTER CROSSTUBE (SHORT) REF

5 1 REF LIGHT SLIDE-ON PUSH TO LOCK REF

6 1 1032807 RT CAPELLA WHEEL LOCK BRACKET (20-24") $58.00

1 1032808 LT CAPELLA WHEEL LOCK BRACKET (20-24") $58.00

1 1032805 RT CAPELLA WHEEL LOCK BRACKET (12-16") $58.00

1 1032806 LT CAPELLA WHEEL LOCK BRACKET (12-16") $58.00

5 1 1029672 KIT - LIGHT SPRING RETURN PUSH TO LOCK ASS'Y, RT $116.00

1 1029673 KIT - LIGHT SPRING RETURN PUSH TO LOCK ASS'Y, LT $116.00

1 1029681 KIT - LIGHT SPRING RETURN PULL TO LOCK ASS'Y, RT $116.00

1 1029682 KIT - LIGHT SPRING RETURN PULL TO LOCK ASS'Y, LT $116.00

NOTES: SEE PARTS LIBRARY – WHEEL LOCKS FOR COMPONENT DETAILS ON LIGHT SLIDE ON WHEEL LOCKS


BERNER WHEEL LOCK SYSYTEM

BERNER WHEEL LOCK PUSH - PULL STYLE


BERNER WHEEL LOCK PUSH - PULL STYLE CLAMP ON TABLE



3 4 1006050 BOLT, HEX HEAD, 1/4-20NC X 2 1/2, ZINC PLATE $4.00

4 2 1021486 SCREW, SOCKET HEAD CAP, 5/16-18NC X 3/4 $3.00

5 1 1021623 WHEEL LOCK RISER BLOCK LONG $14.00

6 1 1021636 BERNER PUSH WHEEL LOCK - HOUSING RT $145.00

1 1021635 BERNER PUSH WHEEL LOCK - HOUSING LT $145.00

7 1 1021710 BERNER PULL WHEEL LOCK - HOUSING LT $145.00

1 1021710 BERNER PULL WHEEL LOCK - HOUSING LT $145.00

8 2 1021731 PULL WHEEL LOCK RISER BLOCK 0.50 $14.00

9 1 1026821 CAPELLA WIDTH GROWABLE REF

10 1 1032805 RT WHEEL LOCK BRACKET (12, 16" WHEEL) $58.00

1 1032807 RT WHEEL LOCK BRACKET (20-24" WHEEL) $58.00

1 1032806 LT WHEEL LOCK BRACKET (12-16" WHEEL) $58.00


1 A 1028320 KIT, CAPELLA BERNER PUSH WHEEL LOCK RT (12-16" WHEEL) $181.00

1 A 1034466 KIT, CAPELLA BERNER PUSH WHEEL LOCK RT (20-24" WHEEL) $181.00

1 A 1028321 KIT, CAPELLA BERNER PUSH WHEEL LOCK LT(12-16" WHEEL) $181.00

1 A 1034491 KIT, CAPELLA BERNER PUSH WHEEL LOCK LT(20-24" WHEEL) $181.00

1 A 1028322 KIT, CAPELLA BERNER PULL WHEEL LOCK RT (12, 16" WHEEL) $181.00

1 A 1034492 KIT, CAPELLA BERNER PULL WHEEL LOCK RT (20-24" WHEEL) $181.00

1 A 1028323 KIT, CAPELLA BERNER PULL WHEEL LOCK LT(12-16" WHEEL) $181.00

1 A 1034493 KIT, CAPELLA BERNER PULL WHEEL LOCK LT(20-24" WHEEL) $181.00

NOTES: SEE PARTS LIBRARY – WHEEL LOCKS FOR COMPONENT DETAILS BERNER WHEEL LOCKS


BERNER WHEEL LOCK PUSH UNILATERAL


BERNER WHEEL LOCK PUSH UNILATERAL TABLE


1 4 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00



4 1 1021604 BERNER UNILATERAL PUSH LOCK - HOUSING LT $149.00

1 1021605 BERNER UNILATERAL PUSH LOCK - HOUSING RT $149.00

5 1 1021617 BERNER REMOTE CABLE SUPPORT $21.00

6 1 1021619 UNILATERAL CABLE ASSY SHORT SINGLE $95.00

1 1021620 UNILATERAL CABLE ASSY LONG SINGLE $95.00

7 2 1021624 WHEEL LOCK RISER BLOCK 0.50 $14.00

8 1 1021633 BERNER BRAKE SLAVE HOUSING RT $127.00

1 1021632 BERNER BRAKE SLAVE HOUSING LT $127.00

9 1 1021653 BERNER SLAVE REMOTE CABLE SUPPORT $21.00



11 1 1032806 LT WHEEL LOCK BRACKET (12-16" WHEEL) $58.00


1 A 1034458 KIT, BERNER PUSH LOCK UNILATERAL RT ACTIVATED (12-16" WHEEL) $189.00

1 A 1034459 KIT, BERNER PUSH LOCK UNILATERAL RT ACTIVATED (20-24" WHEEL) $189.00

1 A 1034460 KIT, BERNER PUSH LOCK UNILATERAL LT ACTIVATED (12-16" WHEEL) $189.00

1 A 1034461 KIT, BERNER PUSH LOCK UNILATERAL LT ACTIVATED (20-24" WHEEL) $189.00

1 A 1034462 KIT, BERNER SLAVE LOCK RT WITH SPACERS (12-16" WHEEL) $167.00


1 A 1034464 KIT, BERNER SLAVE LOCK LT WITH SPACERS (12-16" WHEEL) $167.00


1 C 1034467 KIT, BERNER PUSH LOCK UNILATERAL RT SHORT (12-16" WHEEL) $366.00

1 C 1034468 KIT, BERNER PUSH LOCK UNILATERAL RT SHORT (20-24" WHEEL) $366.00

1 C 1034469 KIT, BERNER PUSH LOCK UNILATERAL LT SHORT (12-16" WHEEL) $366.00

1 C 1034470 KIT, BERNER PUSH LOCK UNILATERAL LT SHORT (20-24" WHEEL) $366.00

1 D 1034471 KIT, BERNER PUSH LOCK UNILATERAL RT LONG (12-16" WHEEL) $366.00

1 D 1034472 KIT, BERNER PUSH LOCK UNILATERAL RT LONG (20-24" WHEEL) $366.00

1 D 1034473 KIT, BERNER PUSH LOCK UNILATERAL LT LONG (12-16" WHEEL) $366.00

1 D 1034474 KIT, BERNER PUSH LOCK UNILATERAL LT LONG (20-24" WHEEL) $366.00

NOTES: A- KIT DOES NOT INCLUDE CABLE , TRIGGER HANDLE OR SLAVE LOCK B- CABLE DOES NOT INCLUDE TRIGGER HANDLE – SEE CHART FOR LENGTH

• SEE PARTS LIBRARY- CABLES AND TRIGGERS FOR TRIGGER HANDLE C- KIT INCLUDES COMPLETE ASSEMBLY SHOWN WITH CABLE AND TRIGGER

HANDLE 16-19” D- KIT INCLUDES COMPLETE ASSEMBLY SHOWN WITH CABLE AND TRIGGER

HANDLE 20-24”


BERNER WHEEL LOCK PULL UNILATERAL


BERNER WHEEL LOCK PULL UNILATERAL TABLE




4 1 1021619 UNILATERAL CABLE ASSY SHORT SINGLE $95.00

1 1021620 UNILATERAL CABLE ASSY LONG SINGLE $95.00



1 1021632 BERNER BRAKE SLAVE HOUSING LT $127.00


8 1 1021722 BERNER UNILATERAL PULL LOCK LT $149.00

1 1021723 BERNER UNILATERAL PULL LOCK RT $149.00

9 1 1021729 BERNER PULL REMOTE CABLE SUPPORT $21.00

10 1 1021731 PULL WHEEL LOCK RISER BLOCK 0.50 $14.00

11 1 1032805 RT WHEEL LOCK BRACKET (12-16" WHEEL) $58.00


12 1 1032806 LT WHEEL LOCK BRACKET (12-16" WHEEL) $58.00


1 A 1034475 KIT, BERNER PULL LOCK UNILATERAL RT ACTIVATED (12-16" WHEEL) $189.00

1 A 1034476 KIT, BERNER PULL LOCK UNILATERAL RT ACTIVATED (20-24" WHEEL) $189.00

1 A 1034477 KIT, BERNER PULL LOCK UNILATERAL LT ACTIVATED (12-16" WHEEL) $189.00

1 A 1034478 KIT, BERNER PULL LOCK UNILATERAL LT ACTIVATED (20-24" WHEEL) $189.00





1 C 1034483 KIT, BERNER PULL LOCK UNILATERAL RT SHORT (12-16" WHEEL) $366.00

1 C 1034484 KIT, BERNER PULL LOCK UNILATERAL RT SHORT (20-24" WHEEL) $366.00

1 C 1034485 KIT, BERNER PULL LOCK UNILATERAL LT SHORT (12-16" WHEEL) $366.00

1 C 1034486 KIT, BERNER PULL LOCK UNILATERAL LT SHORT (20-24" WHEEL) $366.00

1 D 1034487 KIT, BERNER PULL LOCK UNILATERAL RT LONG (12-16" WHEEL) $366.00

1 D 1034488 KIT, BERNER PULL LOCK UNILATERAL RT LONG (20-24" WHEEL) $366.00

1 D 1034489 KIT, BERNER PULL LOCK UNILATERAL LT LONG (12-16" WHEEL) $366.00

1 D 1034490 KIT, BERNER PULL LOCK UNILATERAL LT LONG (20-24" WHEEL) $366.00

NOTES: A- KIT DOES NOT INCLUDE CABLE , TRIGGER HANDLE OR SLAVE LOCK B- CABLE DOES NOT INCLUDE TRIGGER HANDLE – SEE CHART FOR LENGTH

• SEE PARTS LIBRARY - CABLES AND TRIGGERS FOR TRIGGER HANDLE C- KIT INCLUDES COMPLETE ASSEMBLY SHOWN WITH CABLE AND TRIGGER

HANDLE 16-20” D- KIT INCLUDES COMPLETE ASSEMBLY SHOWN WITH CABLE AND TRIGGER

HANDLE 20-24”


ATTENDANT PEDAL

ATTENDANT PEDAL WHEEL LOCK – CAPELLA/ CAPELLA 45


ATTENDANT PEDAL WHEEL LOCK CAPELLA/ CAPELLA 45 – TABLE


1 4 1000014 NUT, HEX, NYLOCK 1/4-20NC $2.00

2 2 1000025 SCREW, SOC HD CAP, 1/4-20 X 0.75 $3.00


4 1 1000372 BOLT, HEX HEAD, 1/4-20NC X 2 $4.00






10 1 1021440 WHEEL LOCK ACTUATOR PEDAL $18.00

11 1 1021441 ACTUATOR PEDAL MOUNTING BRACKET $53.00

12 2 1021443 FLANGE BUSH 0.312 ID X 0.375 OD X 0.25 $3.50

13 2 A 1021445 ATTENDANT LOOP CABLE SHORT 151 $82.00

2 A 1021446 ATTENDANT LOOP CABLE MEDIUM 201 $82.00

2 A 1021707 ATTENDANT LOOP CABLE LONG 301 $86.00

2 A 1021708 ATTENDANT LOOP CABLE X-LONG 351 $86.00

14 1 1021447 DUAL LOOP SPOOL $8.00


16 1 1021632 BERNER BRAKE SLAVE HOUSING LT $127.00



19 1 1021706 ATTENDANT LOCK BENT BRACKET- CAPELLA $19.00

20 1 REF CAPELLA WIDTH GROWABLE REF


22 1 1032806 LT WHEEL LOCK BRACKET (12, 16" WHEEL) $58.00

1 B 1028342 KIT, CAPELLA ATTENDANT WHEEL LOCK 16-20" WIDE $405.00

1 B 1028343 KIT, CAPELLA ATTENDANT WHEEL LOCK 20-24" WIDE $405.00

NOTES: A- 2 CABLES REQUIRED PER CHAIR - SEE CHART B- KIT INCLUDES COMPLETE ASSEMBLY SHOWN WITH CABLES


ATTENDANT PEDAL TILT – CAPELLA/ CAPELLA 45


ATTENDANT PEDAL TILT CAPELLA/ CAPELLA 45 TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 2 1000008 WASHER FLAT 5/16 X 1/16 OD 1/16 THK BLK $1.50






7 1 REF CAPELLA LOWER FRAME REF


9 1 1021478 ATTENDANT TILT FOOT PLATE BLOCK $17.00

10 1 1021482 TILT MOUNTING BLOCK ORION II $46.00

11 1 1021483 ATTENDANT TILT FOOT PLATE $29.00

12 1 1021484 TILT STOPPER $13.00

13 1 B 1021487 STEP TILT CABLE SHORT SPLIT 91 $117.00

1 A 1024940 KIT, ATTENDANT PEDAL TILT CAPELLA - RT SIDE MOUNT $105.00

1 A 1024941 KIT, ATTENDANT PEDAL TILT CAPELLA - LT SIDE MOUNT $105.00

B8075-8092

NOTES: A- KIT INCLUDES COMPLETE ASSEMBLY AS SHOWN WITH CABLES AND PEDAL B- ONLY ONE END OF SPLIT CABLE USED ON CAPELLA- BOTH FOR CAPELLA 45 LEFT SIDE MOUNT SHOWN ON CHAIR


TRIGGER HANDLE & CABLES

CAPELLA – TILT TRIGGER HANDLE AND SINGLE CABLES


CAPELLA TILT TRIGGER HANDLE AND SINGLE CABLES TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 2 1011913 CABLE RETAINER .875-1.00 TUBE $6.00

2 1 REF CAPELLA SEAT FRAME 18X18 GEN ASS'Y REF

3 1 REF TRIGGER HANDLE WITH SINGLE CABLE REF

1 1008929 CABLE ASSY SHORT SINGLE $105.00

1 1008931 CABLE ASSY LONG SINGLE $105.00

1 1010938 CABLE ASSY X·LONG SINGLE $115.00

1 1010692 STROLLER TRIGGER HANDLE $43.00

1 1028344 KIT, TRIGGER HANDLE WITH CABLE (SHORT) $150.00

1 1028345 KIT, TRIGGER HANDLE WITH CABLE (LONG) $150.00

1 1028346 KIT, TRIGGER HANDLE WITH CABLE (X-LONG) $150.00

B8110-8122

NOTES:


CAPELLA 45 – TILT TRIGGER HANDLE AND CABLE


CAPELLA 45 TILT TRIGGER HANDLE AND CABLE TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 2 1011913 CABLE RETAINER .875-1.00 TUBE $6.00


3 1 REF TRIGGER HANDLE WITH SPLIT CABLE REF

1 1008930 DUAL SPLIT CABLE (SHORT) $120.00

1 1008932 DUAL SPLIT CABLE (LONG) $123.00

1 1010936 DUAL SPLIT CABLE (X-LONG) $126.00

1 1010692 STROLLER TRIGGER HANDLE $43.00

1 1020877 KIT, TRIGGER HANDLE WITH SPLIT CABLE (SHORT) $150.00

1 1020878 KIT, TRIGGER HANDLE WITH SPLIT CABLE (LONG) $150.00

1 1020879 KIT, TRIGGER HANDLE WITH SPLIT CABLE (X-LONG) $150.00

B8145-8156

NOTES:


CAPELLA 45 – RECLINE TRIGGER HANDLE AND SINGLE CABLES


CAPELLA 45 RECLINE TRIGGER HANDLE AND SINGLE CABLES TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1010692 STROLLER TRIGGER HANDLE ASS'Y $43.00

2 2 1011913 CABLE RETAINER .875-1.00 TUBE $6.00

3 1 REF RECLINE BACK WITH CYLINDER REF

4 1 REF RECLINE SINGLE CABLE ROUTED REF

1 1008929 SHORT SINGLE TRIGGER CABLE $105.00

1 1008931 LONG SINGLE TRIGGER CABLE $105.00

1 1020952 KIT, TRIGGER HANDLE WITH SINGLE CABLE (SHORT) $145.00

1 1020953 KIT, TRIGGER HANDLE WITH SINGLE CABLE (LONG) $145.00

B8180-8189

NOTES:


TRANSIT HOOKS

CAPELLA – CAPELLA 45 REAR TRANSIT HOOKS

CAPELLA 45 – FRONT TRANSIT HOOKS


CAPELLA - CAPELLA 45 REAR TRANSIT HOOKS TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 4 1000014 NUT, HEX-NYLOCK , 1/4-20NC $2.00



4 1 1014246 BACK CANE BRACKETS C'SINK LT $42.00



7 2 1017138 REAR TIE DOWN - CAPELLA $58.00

8 1 1017139 SEATBELT ATTACHMENT PLATE RT $29.00

9 1 1017140 SEATBELT ATTACHMENT PLATE LT $29.00

1 A 1020872 KIT, REAR TRANSIT HOOKS (ITEMS 7,8 AND 9) $170.00

B8215-8226

NOTES: A- KIT INCLUDES TWO REAR HOOKS & BOTH LT AND RT SEATBELT PLATES.

CAPELLA 45 FRONT TRANSIT HOOKS TABLE



2 1 1013529 MAIN SIDE RAIL RT - WELDMENT REF

3 1 1017020 PIVOT SUPPORT BRACKET RT REF

4 1 1017182 FRONT TIE DOWN CAPELLA $52.00

5 1 REF RT WHEEL LOCK BRACKET (20",22" & 24") REF

1 REF RT WHEEL LOCK BRACKET (20",22" & 24") REF

1 REF RT WHEEL LOCK BRACKET (12, 16" WHEEL) REF

1 REF LT WHEEL LOCK BRACKET (12, 16" WHEEL) REF

6 1 REF CAPELLA LOWER FRAME PIN ASS'Y REF

1 A 1020873 KIT, TIE DOWN BRACKET AND SCREWS (ITEMS 1 AND 4) $105.00

NOTES: A- KIT INCLUDES 2 FRONT TRANSIT HOOKS AND REQUIRED SCREWS


POWER OPTIONS

CAPELLA 45 – POWER TILT OPTION

POWER TILT KIT 16-20” SHOWN


CAPELLA 45 POWER TILT OPTION TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 2 1006705 SCREW, SET, SOCKET HEAD, CUP POINT 1/4-20NC X 1/4 $3.00

2 4 1000194 NUT, HEX-NYLOCK, #10-32NF, BLK $2.50





7 1 1010380 M10 LOC-NUT $3.00

8 1 1010381 M10 SHOULDER BOLT $6.00

9 1 1013084 M10 WASHER FLAT $2.00


11 1 1017121 LINAK ACTUATOR LA31 BASE 100MM STROKE $1,100.00

12 1 1017124 LINAK BATTERY CB8-A $400.00

13 1 1017125 LINAK BATTERY SUPPORT MOUNT $42.00

14 1 1020842 REAR ACTUATOR SHORT MOUNT WELDMENT (16-201) $88.00

1020851 REAR ACTUATOR LONG MOUNT WELDMENT (20-241) $98.00

15 1 1020845 LOWER SUPPORT STRIP RT $45.00

1 1020900 LINAK ACTUATOR CONTROLLER, CHARGER AND CABLES $600.00

1 A 1020858 POWER TILT KIT, COMPLETE ASS'Y 16-20" $2,300.00

1 A 1020859 POWER TILT KIT, COMPLETE ASS'Y 20-24" $2,300.00

B8285-8305

NOTES: A- POWER TILT KIT INCLUDES ITEMS 1-15 PLUS SEAT FRAME BRACKET AND

BOLTS. HANDHELD CONTROLLER AND CABLES INCLUDED (NOT SHOWN).


ACCESSORIES

OXYGEN TANK HOLDER FIXED BACK


OXYGEN TANK HOLDER FIXED BACK TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 1017150 OXYGEN TANK HOLDER 11 TUBE $185.00

2 1 REF OXYGEN TANK ADJUSTABLE MOUNTING TUBE GEN REF

1 1021531 OXYGEN TANK I MOUNTING TUBE (16-201) $55.00

1 1021532 OXYGEN TANK I MOUNTING TUBE (20-241) $55.00

3 1 REF CAPELLA SEAT FRAME FIXED BACK REF

1 1021533 KIT, CAPELLA OXYGEN TANK WITH MOUNTING TUBE (16-20") $225.00

1 1021534 KIT, CAPELLA OXYGEN TANK WITH MOUNTING TUBE (20-24") $225.00

B8320-8328

NOTES: SEE PARTS LIBRARY – OXYGEN TANK FOR OXYGEN TANK HOLDER PARTS


OXYGEN TANK HOLDER RECLINE BACK


OXYGEN TANK HOLDER RECLINE BACK TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 1 REF RECLINE BACK WITH CYLINDER REF

2 1 1017150 OXYGEN TANK HOLDER 11 TUBE $185.00

B8355-8358

NOTES:


CAPELLA TO CAPELLA 45 CONVERSION KIT


CAPELLA TO CAPELLA 45 CONVERSION KIT TABLE

ITEM QTY NOTES PART NO. DESCRIPTION PRICE/ PER UNIT 1 A 1021700 CAPELLA TO CAPELLA 45 CONV. KIT (16-201) $1,670.00

1 A 1021701 CAPELLA TO CAPELLA 45 CONV. KIT (20-241) $1,700.00

B8390-8393

NOTES: A- KIT COMES PRE-ASSEMBLED INCLUDING TRIGGER CABLE ATTACHED SPECIFY BUILD WIDTH WHEN ORDERING

Documents

PARTS MANUAL - Future Mobility Healthcarecapella pb rev 14 page 7 capella – growable lower frame table item qty notes part no. description price/ per unit 1 6 1000008 washer flat