7/27/2019 Parameter Audit Summary
1/1
PARAMETER AUDIT SUMMARY
1) Cell Reselection Parameters (Qmin, Qrxlevmin, Time Threshold,
Hysteresis, S-Search)a. Intra- Frequencyb. Inter- Frequencyc.
Inter- RAT Cell Reselection
2) Paging, Access and Connected Mode Parametersa. Access:
Timer300, Power Ramp Step, M-maxb. Paging: PICH power Offsetc.
Connected Mode: T312, T314, T315, T302
3) Power Control Parametera. Open Loopb. Downlink Closed Loopc.
Uplink Closed Loop
4) Power Allocation Parametersa. Max allowed Uplink TX powerb.
Primary CPICH TX powerc. Maximum DCH power
5) Measurement Report Control and Handover Parametersa.
Intra-Reporting Range, hysteresis, Triggering Time ( Event 1x)b.
Inter- Reporting Range, hysteresis, Triggering Time (Event 2x)c.
Inter-RAT Reporting Range, hysteresis, Triggering Time (Event
3X)
6) HSDPA Parametersa. Physical Shared Channel Configuration
Parametersb. Uplink HS-PDCCH Parametersc. Transport Parametersd.
HS-DSCH Serving Cell Range Parameters
