Ivory ® Modern Materials®

Dri-Clave®VacuKleen

CMYK: 96 / 77 / 1 / 0

CMYK: 76 / 12 / 31 / 17

CMYK: 96 / 59 / 4 / 17

CMYK: 0 / 0 / 0 / 55 CMYK: 56 / 89 / 42 / 32

Giving a hand to oral health.

Create your best

workflow and optimize production with

cara© 3D printing technology.

Pala® Digital Dentures Better Precision. Faster Production. Higher Profitability.

Brochure

< 2 hrs.

DESIGN CAD SOFTWARE

PRINTCARA PRINT 4.0,DIMA MATERIALS

The evolution of Pala Digital DenturesWe’re continuing to revolutionizethe denture process: introducing the new 2.0 digital workflow.

The Pala Digital Dentures 2.0 workflow incorporates 3D scanning, design and printing technologies with your preferred fabrication techniques. The result is increased efficiency and cost savings for the laboratory, and dentures that look natural and fit perfectly for the patient.

Utilize Kulzer equipment to easily scan, design and create patient try-ins. Kulzer’s team of experts can also assist with designing and prototyping.

When it’s time to process the final denture, your team has full independence and control. A wide range of economy and premium options ensure you’ll get consistent, precise results every time—whether you opt for a fully printed denture, or more traditional methods. You design your workflow of choice as a Pala Digital Dentures partner lab!

STEP 1: SCANUSE IMPRESSIONS, ORMODELS AND BITE RIMS

Equipment you’ll need:

Pala Design Studio Web-based CAD design softwarePalaDesignStudio.com

Kulzer Tooth LibraryPurchase the Kulzer Tooth Library for your 3Shape® dongle. This will allow you to print Pala denture teeth.

Equipment you’ll need:

Scanner (coming soon) cara Scan 4.0

ImpressionsPala Digital Dentures impression trays

Models & Bite Rimsif not scanning impressions

Design The Kulzer Design Team can work from your scanned, digitized files to create the STL files needed for printing a prototype.

Prototype Kulzer can then use your open STL files to produce a fully printed prototype. We can also use our denture resins to create a fully printed denture, or a printed denture base outfitted with top-of-the-line Mondial acrylic teeth.

Please note: the final steps of finishing and processing must be completed by the laboratory.

Flexibility to use internal or external resources.The Kulzer team can assist you in the design and prototyping phases.

STEP 2: DESIGNPALA DESIGN STUDIO, KULZER TOOTH LIBRARY

Pala Digital Dentures 2.0 workflow

Pala DigitalDentures 2.0

gives you freedom to create your best workflow

Coming Soon!

Equipment you’ll need:

3D printer cara Print 4.0

Nesting software cara CAM

Print resins dima Print

Post curing unit HiLite power 3D

Tooth cutting jig**

Prototype Options1. All-white printed prototype with dima Print Denture Base Try-in

2. Printed base prototype with dima Print Denture Base and Mondial® or Mondial i® teeth waxed in sockets

3. Pala 3D-printed denture (base & teeth) with choice of dima Print Denture Base and Denture Teeth shades

*All dima Print materials indicated for intraoral use are FDA-cleared. **If a tooth cutting jig is required, design must be done by Kulzer.

If traditionally processing:

Injection unit Palajet

Pressure curing unit Palamat elite

Denture acrylics Pala acrylics

Teeth Pala Artic, Pala Mondial

Tooth cutting jig**

Equipment you’ll need:

Print complete, high quality final dentures quickly, accurately, and economically with the cara Print 4.0 3D DLP printer and FDA cleared dima Print materials.

Traditional processing methodscan also be used if desired.

Final Denture Options1. Pala 3D-printed denture (no tooth jig required)

2. Printed denture base with Mondial teeth

3. Traditionally processed acrylic base with Mondial teeth

Personalize your dentures with Pala cre-active for custom denture characterization!

Flexibility to use internal or external resources.The Kulzer team can assist you in the design and prototyping phases.

STEP 3: PROTOTYPECARA PRINT 4.0, DIMA PRINT, HILITE POWER 3D

STEP 4: FINISHPALA 3D-PRINTED DENTURE, OR ALTERNATE TECHNIQUES

Ivory ® Modern Materials®

Dri-Clave®VacuKleen

CMYK: 96 / 77 / 1 / 0

CMYK: 76 / 12 / 31 / 17

CMYK: 96 / 59 / 4 / 17

CMYK: 0 / 0 / 0 / 55 CMYK: 56 / 89 / 42 / 32

You can also mill a final denture. For more detail on finishing options, visit kulzerUS.com/PalaDigitalDentures.

To learn more about denture prototype options, visit kulzerUS.com/3DPrintedDenture.

Pala

3D-

Print

ed Denture, powered by cara and dima

FDA cleared*

Custom denture characterization.Once you’ve fabricated your printed denture, you can use Pala cre-active® to achieve an even more personalized, life-like look that will really wow your customers.

Available as a set or in refills, the Pala cre-active light-curing color fluid system offers 12 colors in various consistencies. The cre-active system is universally manageable due to the structural viscosity of the liquid stains, and can be used to individualize conventional, digital, and hybrid dentures.

Quick, precise, economical.In addition to the high quality aesthetics you canachieve with a printed denture solution, it’s important to consider the time and cost savings you’ll gain with cara Print 4.0 and dima Print resins.

With an average print time of 53 minutes for adenture base, and 25 minutes for teeth, you could make a fully printed denture in under two hours!

A CAD-to-cast structure,

made with dima Print Cast

dima Print Denture Materials

Material Indication MDD class Color(s)

Flexural Strength [MPa]

Flexural Modulus [MPa]

Printing time per part

Material consumption (incl. supports) / Costs

dima Print Denture Base Try-in Denture base try-in II White 85.2 2152.2 45 - 60 min (90µm)

25 – 33g / $9.75 - $12.87

dima Print Denture Base Try-in Denture base try-in II Pink 90.8 2147 45 - 60 min (90µm)

25 – 33g / $9.75 - $12.87

dima Print Denture Base Denture Base II

Light reddish pink, light pink, original pink, dark pink

76.0 - 82.7

2328 - 2533

50 - 56 min (100µm)

22 – 24g / $8.26 - $9.30

dima Print Denture Teeth Denture Teeth IIShades A1, A2, A3, A3.5, B1, B2

>50 mPa

n/a 22 - 28 min (50µm)

8 – 12g / $4.89 - $5.50

Beautiful, perfectly fitted dentures in under two hours.

PD

D_B

RO

_1

01

/19

©2019 Kulzer, LLC. All Rights Reserved. All other trademarks are property of their respective owners.

Distributed by:Kulzer, LLC4315 S. Lafayette Blvd.South Bend, IN 46614(800) 431-1785

kulzerUS.com Caution: U.S. Federal law restricts this device to sale by or on the order of a dental professional.

Also from Kulzer:

cara© Print 4.0Quick, precise, economical: The perfect fit. Quick and easy: print most restorations in one hour or less.

3D-DLP technology—for accurate restorations that fit perfectly.

More cost-effective than most 3D printers.

Open STL files work with most CAD programs, such as 3Shape.

dima© Print materialsFine-tuned 3D printing resins.dima Print materials are light-curing monomeric liquids specially optimized for 3D printing and the requirements of dental applications.

When used with cara Print 4.0 and the HiLite Power 3D post-curing unit, you’ll see the benefits of a comprehensive 3D-printing system designed for speed, reliability and value.

NEW! P

rinte

d De

ntur

e m

ade w

ith dima Denture Base & dima Denture Teeth

66069095 cara Print 4.0 – 3D DLP printer 66069514 Signum HiLite power 3D – post-curing unit

66075558 dima Print Denture Base Try-in – white 66077054 dima Print Denture Teeth – A1

66075560 dima Print Denture Base Try-in – pink 66077055 dima Print Denture Teeth – A2

66077050 dima Print Denture Base – light reddish pink 66077056 dima Print Denture Teeth – A3

66077051 dima Print Denture Base – light pink 66077057 dima Print Denture Teeth – A3.5

66077052 dima Print Denture Base – original pink 66077058 dima Print Denture Teeth – B1

66077053 dima Print Denture Base – dark pink 66077059 dima Print Denture Teeth – B2

cara Print Product Numbers

dima Print Denture Materials