Pagina 2 din 170en iso 14171:2016 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine

Pagina 2 din 170

#Standardul planificat spre adoptare

Titlul standardului planificat spre adoptareStandardul modovenesc planificat spre anulare

Termenul limită pentru

adoptareICS 1 ICS 2 ICS 3 ICS 4

18 EN 13598-2:2016Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers

Trim. I 03.100.436 35.240.496

19 EN ISO 14171:2016Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016)

SM SR EN ISO 14171:2012 Trim. I 03.100.437 35.240.497

20 EN 14375:2016Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing

Trim. I 03.100.439 35.240.499

21 EN 14504:2016Inland navigation vessels - Floating landing stages and floating equipment on inland waters - Requirements, tests

Trim. I 03.100.441 35.240.501

22 EN 14984:2016 Liming materials - Determination of product effect on soil pH - Soil incubation method Trim. I 03.100.443 35.240.503

23 EN ISO 15012-4:2016Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016)

Trim. I 03.100.444 35.240.504

24 EN 15048-2:2016 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose SM EN 15048-2:2016 Trim. I 03.100.446 35.240.506

25 EN 15433-6:2016Transportation loads - Measurement and evaluation of dynamicmechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports

Trim. I 03.100.447 35.240.507

26 EN 15626:2016Bitumen and bituminous binders - Determination of adhesivity of cutback and fluxed bituminous binders by water immersion test - Aggregate method

Trim. I 03.100.448 35.240.508

27 EN ISO 16140-1:2016 Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016) Trim. I 03.100.449 35.240.509

28 EN ISO 16140-2:2016Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016)

Trim. I 03.100.450 35.240.510

29 EN ISO 16170:2016 In situ test methods for high efficiency filter systems in industrial facilities (ISO 16170:2016) Trim. I 03.100.451 35.240.511

30 EN 16838:2016Refrigerated display scooping cabinets for gelato - Classification, requirements and test conditions

Trim. I 03.100.453 35.240.513

31 EN ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016) Trim. I 03.100.458 35.240.518

32 EN ISO 17468:2016Microbiology of the food chain - Technical requirements and guidance on establishment or revision of a standardized reference method (ISO 17468:2016)

Trim. I 03.100.460 35.240.520

33 EN 1794-3:2016Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification

Trim. I 03.100.597 35.240.657

34 EN ISO 18752:2016Rubber hoses and hose assemblies - Wire- or textile-reinforced singlepressure types for hydraulic applications - Specification (ISO 18752:2014)

Trim. I 03.100.461 35.240.521

35 EN 19694-1:2016Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects

Trim. I 03.100.462 35.240.522

36 EN 19694-2:2016Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry

Trim. I 03.100.463 35.240.523

Pagina 3 din 170





37 EN 19694-3:2016Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry

Trim. I 03.100.464 35.240.524

38 EN 19694-4:2016Stationary source emissions - Determination of greenhouse gas (GHG)emissions in energy-intensive industries - Part 4: Aluminium industry

Trim. I 03.100.465 35.240.525

39 EN 19694-5:2016Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry

Trim. I 03.100.466 35.240.526

40 EN 19694-6:2016Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry

Trim. I 03.100.467 35.240.527

41 EN ISO 2719:2016 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) SM SR EN ISO 2719:2012 Trim. I 03.100.598 35.240.658

42 EN 2997-014:2016Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 014: Square flange receptacle with integrated accessory - Product standard

Trim. I 03.100.599 35.240.659

43 EN ISO 3581:2016Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2016)

SM EN ISO 3581:2014 Trim. I 03.100.600 35.240.660

44 EN 4474:2016 Aerospace series - Aluminium pigmented coatings - Coating methods Trim. I 03.100.601 35.240.661

45 EN ISO 4759-3:2016 Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - SM EN ISO 4759-3:2015 Trim. I 03.100.630 35.240.690

46 EN 485-1:2016Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery

SM EN 485-1+A1:2015 Trim. I 03.100.589 35.240.649

47 EN ISO 5089:2016Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)

SM SR ISO 5089:2013 Trim. I 03.100.569 35.240.629

48 EN ISO 6892-1:2016Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)

SM SR EN ISO 6892-1:2014 Trim. I 03.100.570 35.240.630

49 EN ISO 7027-1:2016 Water quality - Determination of turbidity - Part 1: Quantitative methods (ISO 7027-1:2016) Trim. I 03.100.631 35.240.691

50 EN ISO 8049:2016 Ferronickel shot - Sampling for analysis (ISO 8049:2016) Trim. I 03.100.632 35.240.692

51 EN ISO 8254-2:2016Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)

SM EN ISO 8254-2:2015 Trim. I 03.100.571 35.240.631

52 EN ISO 9241-920:2016Ergonomics of human-system interaction - Part 920: Guidance on tactile and haptic interactions (ISO 9241-920:2009)

Trim. I 03.100.572 35.240.632

53 EN ISO 9692-3:2016Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016)

SM EN ISO 9692-3:2015 SM EN ISO 9692-3:2015/A1:2015

Trim. I 03.100.573 35.240.633

54 EN 1102:2016Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens

SM SR EN 1102:2012 Trim. I 03.100.508 35.240.568

55 EN 13129:2016Railway applications - Air conditioning for main line rolling stock -Comfort parameters and type tests

SM EN 13129-1:2015 SM EN 13129-2:2015

Trim. I 03.100.528 35.240.588

56 EN ISO 13355:2016Packaging - Complete, filled transport packages and unit loads – Vertical random vibration test (ISO 13355:2016)

SM EN ISO 13355:2016 Trim. I 03.100.529 35.240.589

Pagina 4 din 170





57EN 13480-2:2012/A2:2016

Metallic industrial piping - Part 2: Materials Trim. I 03.100.532 35.240.592

58 EN ISO 14189:2016Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration (ISO 14189:2013)

SM ISO 14189:2015 Trim. I 03.100.533 35.240.593

59 EN ISO 14244:2016Oilseed meals - Determination of soluble proteins in potassium hydroxide solution (ISO 14244:2014)

Trim. I 03.100.534 35.240.594

60 EN ISO 14405-1:2016Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)

SM EN ISO 14405-1:2016 Trim. I 03.100.535 35.240.595

61 EN 14582:2016Characterization of waste - Halogen and sulfur content – Oxygen combustion in closed systems and determination methods

SM SR EN 14582:2012 Trim. I 03.100.536 35.240.596

62 EN 14595:2016 Tanks for transport of dangerous goods - Service equipment – Breather device SM SR EN 14595:2012 Trim. I 03.100.537 35.240.597

63 EN 14713:2016Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding

Trim. I 03.100.538 35.240.598

64 EN 1482-3:2016Fertilizers and liming materials - Sampling and sample preparation – Part 3: Sampling of static heaps

Trim. I 03.100.509 35.240.569

65 EN ISO 14880-1:2016Optics and photonics - Microlens arrays - Part 1: Vocabulary and general properties (ISO 14880-1:2016)

SM EN ISO 14880-1:2016 SM EN ISO 14880-1:2016/AC:2016

Trim. I 03.100.539 35.240.599

66 EN ISO 1514:2016 Paints and varnishes - Standard panels for testing (ISO 1514:2016) SM SR EN ISO 1514:2013 Trim. I 03.100.510 35.240.570

67 EN 15220:2016 Railway applications - Brake indicators SM EN 15220-1+A1:2015 Trim. I 03.100.541 35.240.601

68 EN ISO 15858:2016 UV-C Devices - Safety information - Permissible human exposure (ISO 15858:2016) Trim. I 03.100.543 35.240.603

69 EN 16186-3:2016 Railway applications - Driver's cab - Part 3: Design of displays Trim. I 03.100.545 35.240.605

70 EN 16602-20-07:2016 Space product assurance - Quality and safety assurance for space test centres Trim. I 03.100.547 35.240.607

71 EN 16602-20-08:2016 Space product assurance - Storage, handling and transportation of spacecraft hardware Trim. I 03.100.548 35.240.608

72 EN 16602-70-71:2016 Space product assurance - Materials, processes and their data selection Trim. I 03.100.549 35.240.609

73 EN 16603-32-08:2016 Space engineering - Materials Trim. I 03.100.550 35.240.610

74 EN 16643:2016Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification

Trim. I 03.100.551 35.240.611

75 EN 16714-1:2016 Non-destructive testing - Thermographic testing - Part 1: General principles Trim. I 03.100.552 35.240.612

76 EN 16714-2:2016 Non-destructive testing - Thermographic testing - Part 2: Equipment Trim. I 03.100.553 35.240.613

77 EN 16714-3:2016 Non-destructive testing - Thermographic testing - Part 3: Terms and definitions Trim. I 03.100.554 35.240.614

78 EN 16734:2016 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods Trim. I 03.100.555 35.240.615

Pagina 5 din 170





79 EN 16789:2016 Ambient air - Biomonitoring with Higher Plants - Method of the standardized tobacco exposure Trim. I 03.100.556 35.240.616

80 EN 16811-1:2016Winter service equipment and products - De-icing agents - Part 1: Sodium chloride - Requirements and test methods

Trim. I 03.100.557 35.240.617

81 EN 16811-2:2016Winter service equipment and products - De-icing agents - Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods

Trim. I 03.100.558 35.240.618

82 EN 16825:2016Refrigerated storage cabinets and counters for professional use - Classification, requirements and test conditions

Trim. I 03.100.559 35.240.619

83 EN 16831:2016 Tractors and machinery for agriculture and forestry - Safety - Format for reporting accidents Trim. I 03.100.351 35.240.411

84 EN ISO 16994:2016 Solid biofuels - Determination of total content of sulfur and chlorine (ISO 16994:2016) Trim. I 03.100.353 35.240.413

85 EN ISO 17254:2016 Dentistry - Coiled springs for use in orthodontics (ISO 17254:2016) Trim. I 03.100.356 35.240.416

86 EN ISO 17294-2:2016Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016)

SM SR EN ISO 17294-2:2012 Trim. I 03.100.357 35.240.417

87 EN 1765:2016 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies SM EN 1765:2015 Trim. I 03.100.512 35.240.572

88 EN ISO 19076:2016 Leather - Measurement of leather surface - Using electronic techniques (ISO 19076:2016) Trim. I 03.100.358 35.240.418

89 EN ISO 19901-4:2016Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2016)

SM EN ISO 19901-4:2016 Trim. I 03.100.359 35.240.419

90 EN 204:2016 Classification of thermoplastic wood adhesives for non-structural applications SM SR EN 204:2013 Trim. I 03.100.501 35.240.561

91 EN 205:2016Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints

Trim. I 03.100.502 35.240.562

92 EN ISO 22476-15:2016Geotechnical investigation and testing - Field testing - Part 15: Measuring while drilling (ISO 22476-15:2016)

Trim. I 03.100.360 35.240.420

93 EN ISO/IEC 27037:2016Information technology - Security techniques - Guidelines for identification, collection, acquisition and preservation of digital evidence (ISO/IEC 27037:2012)

SM ISO/CEI 27037:2014 Trim. I 03.100.476 35.240.536

94 EN ISO/IEC 27038:2016Information technology - Security techniques - Specification for digital redaction (ISO/IEC 27038:2014)

Trim. I 03.100.477 35.240.537

95 EN ISO/IEC 27040:2016 Information technology - Security techniques - Storage security (ISO/IEC 27040:2015) Trim. I 03.100.478 35.240.538

96 EN ISO/IEC 27041:2016Information technology - Security techniques - Guidance on assuring suitability and adequacy of incident investigative method (ISO/IEC 27041:2015)

Trim. I 03.100.479 35.240.539

97 EN ISO/IEC 27042:2016Information technology - Security techniques - Guidelines for the analysis and interpretation of digital evidence (ISO/IEC 27042:2015)

Trim. I 03.100.480 35.240.540

98 EN ISO/IEC 27043:2016Information technology - Security techniques - Incident investigation principles and processes (ISO/IEC 27043:2015)

Trim. I 03.100.481 35.240.541

Pagina 6 din 170





99 EN ISO 27799:2016Health informatics - Information security management in health using ISO/IEC 27002 (ISO 27799:2016)

SM EN ISO 27799:2016 Trim. I 03.100.367 35.240.427

100 EN ISO/IEC 30121:2016 Information technology - Governance of digital forensic risk framework (ISO/IEC 30121:2015) Trim. I 03.100.482 35.240.542

101 EN ISO 3248:2016 Paints and varnishes -Determination of the effect of heat (ISO 3248:2016) SM SR EN ISO 3248:2013 Trim. I 03.100.513 35.240.573

102 EN 350:2016Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials

SM SR EN 350-1:2012 SM SR EN 350-2:2012

Trim. I 03.100.503 35.240.563

103 EN 384:2016 Structural timber - Determination of characteristic values of mechanical properties and density SM SR EN 384:2012 Trim. I 03.100.504 35.240.564

104EN ISO 389-7:2005/A1:2016

Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffusefield listening conditions - Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions (ISO 389-7:2005/Amd1:2016)

Trim. I 03.100.505 35.240.565

105 EN ISO 4590:2016Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)

SM SR EN ISO 4590:2013 Trim. I 03.100.514 35.240.574

106 EN ISO 4623-2:2016Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016)

SM EN ISO 4623-2:2016 SM EN ISO 4623-2:2016/AC:2016

Trim. I 03.100.515 35.240.575

107 EN 47:2016Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method)

Trim. I 03.100.500 35.240.560

108 EN ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) SM SR EN ISO 5182:2012 Trim. I 03.100.516 35.240.576

109 EN ISO 5667-14:2016Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014)

Trim. I 03.100.517 35.240.577

110 EN ISO 6009:2016 Hypodermic needles for single use - Colour coding for identification (ISO 6009:2016)SM EN ISO 6009:2016 SM EN ISO 6009:2016/AC:2016

Trim. I 03.100.518 35.240.578

111 EN 6090:2016 Aerospace series - Washer, retaining Trim. I 03.100.519 35.240.579

112 EN 6092:2016 Aerospace series - Receptacle, floating, double lug Trim. I 03.100.520 35.240.580

113 EN 6094:2016 Aerospace series - Washer, spring, countersunk Trim. I 03.100.521 35.240.581

114 EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) SM EN ISO 6508-1:2016 Trim. I 03.100.522 35.240.582

115 EN ISO 6976:2016Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)

SM EN ISO 6976:2016 SM SR EN ISO 6976:2016/C91:2016 SM SR EN ISO 6976:2016/C92:2016 SM SR EN ISO 6976:2016/C93:2016

Trim. I 03.100.523 35.240.583

Pagina 7 din 170





116 EN ISO 7236:2016Ships and marine technology - Inland navigation vessels – Mounting attachments for demountable signal masts for push-tows (ISO 7236:2014)

Trim. I 03.100.524 35.240.584

117 EN 764-1:2015+A1:2016 Pressure equipment - Part 1: Vocabulary SM EN 764-1:2016 Trim. I 03.100.506 35.240.566

118 EN ISO 7864:2016 Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016) SM SR EN ISO 7864:2012 Trim. I 03.100.525 35.240.585

119 EN ISO 80369-3:2016Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016)

Trim. I 03.100.499 35.240.559

120 EN ISO 8666:2016 Small craft - Principal data (ISO 8666:2016) SM SR EN ISO 8666:2011 Trim. I 03.100.526 35.240.586

121 EN 892:2012+A1:2016Mountaineering equipment - Dynamic mountaineering ropes – Safety requirements and test methods

SM SR EN 892:2014 Trim. I 03.100.507 35.240.567

122 EN ISO 9626:2016Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016)

SM SR EN ISO 9626:2012 Trim. I 03.100.527 35.240.587

123 EN 4534-2:2016Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series

Trim. I 03.100.266 35.240.326

124 EN ISO 14456:2016 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015) Trim. I 03.100.291 35.240.351

125 EN 12896-2:2016 Public transport - Reference data model - Part 2: Public transport network Trim. I 03.100.279 35.240.339

126 EN ISO 1:2016Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2016)

SM SR EN ISO 1:2013 Trim. I 03.100.414 35.240.474

127 EN ISO 11664-5:2016Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram (ISO/CIE 11664-5:2016)

SM EN ISO 11664-5:2016 Trim. I 03.100.276 35.240.336

128 EN 12896-1:2016 Public transport - Reference data model - Part 1: Common concepts Trim. I 03.100.278 35.240.338

129 EN 12896-3:2016 Public transport - Reference data model - Part 3: Timing information and vehicle scheduling Trim. I 03.100.280 35.240.340

130 EN 13204:2016Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements

SM SR EN 13204+A1:2014 Trim. I 03.100.281 35.240.341

131 EN 14037-2:2016Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 2: Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output

SM SR EN 14037-2:2013 Trim. I 03.100.284 35.240.344

132 EN 14037-3:2016Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 3: Prefabricated ceiling mounted radiant panels for space heating - Rating method and evaluation of radiant thermal output

SM SR EN 14037-3:2013 Trim. I 03.100.285 35.240.345

133 EN 14037-4:2016Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity

Trim. I 03.100.286 35.240.346

134 EN 14037-5:2016Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 5: Open or closed heated ceiling surfaces - Test method for thermal output

Trim. I 03.100.287 35.240.347

135 EN 14112:2016Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) – Determination of oxidation stability (accelerated oxidation test)

SM SR EN 14112:2012 Trim. I 03.100.288 35.240.348

Pagina 8 din 170





136 EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar Trim. I 03.100.290 35.240.350

137 EN 15566:2016 Railway applications - Railway rolling stock - Draw gear and screw coupling SM EN 15566+A1:2015 Trim. I 03.100.293 35.240.353

138 EN 16272-4:2016Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field

Trim. I 03.100.295 35.240.355

139 EN 16974:2016 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing Trim. I 03.100.299 35.240.359

140 EN ISO 17296-2:2016Additive manufacturing - General principles - Part 2: Overview of process categories and feedstock (ISO 17296-2:2015)

Trim. I 03.100.302 35.240.362

141 EN ISO 17296-3:2016Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)

Trim. I 03.100.303 35.240.363

142 EN ISO 17296-4:2016Additive manufacturing - General principles - Part 4: Overview of data processing (ISO 17296-4:2014)

Trim. I 03.100.304 35.240.364

143 EN ISO 17672:2016 Brazing - Filler metals (ISO 17672:2016) SM EN ISO 17672:2016 Trim. I 03.100.305 35.240.365

144 EN 1815:2016 Resilient and laminate floor coverings - Assessment of static electrical propensity Trim. I 03.100.415 35.240.475

145 EN ISO 18846:2016 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016) Trim. I 03.100.306 35.240.366

146 EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016) Trim. I 03.100.307 35.240.367

147 EN 2714-014:2016Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 014: DR family, 4 to 11 cores, taped, screened (braided) and jacketed, UV laser printable - Product standard

Trim. I 03.100.416 35.240.476

148 EN 2997-002:2016Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact arrangements

Trim. I 03.100.417 35.240.477

149 EN 2997-005:2016Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 005: Hermetic square flange receptacle - Product standard

Trim. I 03.100.418 35.240.478

150 EN 2997-007:2016

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 007: Hermetic receptacle with round flange attached by welding or brazing - Product standard

Trim. I 03.100.261 35.240.321

151 EN 3155-001:2016Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification

Trim. I 03.100.262 35.240.322

Pagina 9 din 170





152 EN 3375-007:2016Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard

Trim. I 03.100.263 35.240.323

153 EN 3375-009:2016Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard

Trim. I 03.100.264 35.240.324

154 EN 4056-003:2016Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard

Trim. I 03.100.265 35.240.325

155 EN 4535-2:2016Aerospace series - Bushes, flanged in aluminium alloy with selflubricating liner, elevated load - Part 2: Dimensions and loads - Inch series

Trim. I 03.100.267 35.240.327

156EN ISO/ASTM 52921:2016

Standard terminology for additive manufacturing - Coordinate systems and test methodologies (ISO/ASTM 52921:2013)

Trim. I 03.100.308 35.240.368

157 EN ISO 5667-6:2016 Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams (ISO 5667-6:2014) SM SR ISO 5667-6:2011 Trim. I 03.100.270 35.240.330

158 EN 6080:2016 Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series Trim. I 03.100.271 35.240.331

159 EN 6081:2016 Aerospace series - Rivet, universal head, close tolerance - Inch series Trim. I 03.100.272 35.240.332

160 EN 6101:2016 Aerospace series - Rivet, 100° medium flush head, close tolerance – Inch series Trim. I 03.100.273 35.240.333

161 EN 6105:2016 Aerospace series - Stud with shoulder Trim. I 03.100.274 35.240.334

162 EN 6129:2016 Aerospace series - Blind bolt, protruding head, high strength, pulltype Trim. I 03.100.275 35.240.335

163 EN 1004:2004Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements

Trim. I 91.220

164EN ISO 10052:2004/A1:2010

Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method - Amendment 1 (ISO 10052:2004/Amd 1:2010)

Trim. I 17.140.20 91.120.20 91.140.01

165 ISO 10055:1996Mechanical vibration -- Vibration testing requirements for shipboard equipment and machinery components

GOST 30630.1.2-99 (ISO 10055:1996)

Trim. I 17.160 47.020.01

166 ISO 1005-9:1986Railway rolling stock material -- Part 9: Axles for tractive and trailing stock -- Dimensional requirements

GOST 22780-93 (ISO 1005-9-86)

Trim. I 77.140.99 45.060.01

167CEN/CLC/ETSI/TR 101 552:2014

Guidance for the application of conformity assessment to accessibility requirements for public procurement of ICT products and services in Europe

Trim. I 03.100.10 13.180 33.020 35.020

168 ISO 1014:1985 Coke -- Determination of true relative density, apparent relative density and porosityGOST 10220-82 (ISO 1014-85)

Trim. I 75.160.10

169EN ISO 10140-3:2010/A1:2015

Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation - Amendment 1 (ISO 10140-3:2010/Amd 1:2015)

Trim. I 91.120.20

170EN ISO 10140-5:2010/A1:2014

Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment - Amendment 1: Rainfall sound (ISO 10140-5:2010/Amd 1:2014)

Trim. I 91.120.20

171EN 1015-3:1999/A1:2004

Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)

Trim. I 91.100.10

172CEN/CLC/ETSI TR 101550:2014

Documents relevant to EN 301 549 "Accessibility requirements suitable for public procurement of ICT products and services in Europe"

Trim. I 03.100.10 13.180 33.020 35.020

Pagina 10 din 170






Guidelines on the use of accessibility award criteria suitable for public procurement of ICT products and services in Europe

Trim. I 03.100.10 13.180 33.020 35.020

174 ISO 1018:1975 Hard coal -- Determination of moisture-holding capacityGOST 8858-93 (ISO 1018-75)

Trim. I 73.040

175 EN ISO 10248:1999 Fluid fertilizers - De-aeration of suspension samples by film disentrainment (ISO 10248:1996) Trim. I 65.080

176 EN ISO 10249:1999Fluid fertilizers - Preliminary visual examination and preparation of samples for physical testing (ISO 10249:1996)

Trim. I 65.080

177 EN 10251:2015Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip

Trim. I 29.030 77.140.50

178 EN 10252:1997Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies

Trim. I 29.040.10 77.140.50

179 EN 10265:1995Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability

Trim. I 29.030

180 ISO 10303-1:1994Industrial automation systems and integration -- Product data representation and exchange -- Part 1: Overview and fundamental principles

GOST ISO 10303-1-2002 Trim. I 25.040.40

181 EN 10318:2005Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method

Trim. I 17.040.20 25.220.40

182 ISO 10326-2:2001Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration -- Part 2: Application to railway vehicles

SM GOST 31317.2:2008 (ISO 10326-2:2001)

Trim. I 13.160 45.060.01

183 EN 10330:2015Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open magnetic circuit

Trim. I 29.030

184 EN 10331:2003 Magnetic materials - Specification for sintered soft magnetic materials Trim. I 29.030

185 ISO 10332:2010Non-destructive testing of steel tubes -- Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness

GOST ISO 10332-2002 Trim. I 77.140.75 77.040.20 23.040.10

186 EN 10333:2005Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate)

Trim. I 67.250

187 EN 10334:2005Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate)

Trim. I 67.250

188 EN 10335:2005Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel

Trim. I 67.250

189 EN 10342:2005Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations

Trim. I 29.030 77.140.50

190 CEN/TR 10345:2013Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods

Trim. I 03.120.30 17.020

191 EN ISO 10360-5:2010Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)

Trim. I 17.040.30

Pagina 11 din 170





192 EN ISO 10519:2015 Rapeseed - Determination of chlorophyll content - Spectrometric method (ISO 10519:2015) Trim. I 67.200.20

193 ISO 10531:1992 Packaging -- Complete, filled transport packages -- Stability testing of unit loads GOST ISO 10531-2001 Trim. I 55.180.40

194 ISO 10532:1995 Earth-moving machinery -- Machine-mounted retrieval device -- Performance requirements GOST ISO 10532-2000 Trim. I 53.100

195ISO 10532:1995/Amd 1:2004

Earth-moving machinery -- Machine-mounted retrieval device -- Performance requirements Trim. I

196ISO 10532:1995/Cor 1:2006


197ISO 10532:1995/Amd 1:2004/Cor 1:2006


198EN ISO 10545-7:1998/AC:1999

Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles (ISO 10545-7:1996)

Trim. I 91.100.15

199 EN 1065:1998Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests

Trim. I 91.220

200 EN 1075:2014 Timber structures - Test methods - Joints made with punched metal plate fasteners Trim. I 91.080.20

201 EN ISO 10807:1996Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere (ISO 10807:1994)

Trim. I 29.260.20

202 EN ISO 10846-2:2008Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)

Trim. I 17.140.01

203 EN 1086:1995Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed

Trim. I 55.080

204 ISO/TR 10949:2002Hydraulic fluid power -- Component cleanliness -- Guidelines for achieving and controlling cleanliness of components from manufacture to installation

SM GOST ISO/TR 10949:2008

Trim. I 23.100.60

205 ISO 10998:2008 Agricultural tractors -- Requirements for steeringSM GOST R 51961:2012 (ISO 10998:1995)

Trim. I 65.060.10

206EN ISO 11073-10418:2014/AC:2016

Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor - Technical Corrigendum 1 (ISO/IEEE 11073-10418:2014/Cor 1:2016)

Trim. I 03.100.194 35.240.254

207 ISO 11112:1995 Earth-moving machinery -- Operator's seat -- Dimensions and requirements GOST ISO 11112-2000 Trim. I 53.100

208 EN ISO 1119:2011Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)

Trim. I 17.040.01

209 ISO 1139:1973 Textiles -- Designation of yarnsGOST 16736-2002 (ISO 1139-73)

Trim. I 59.080.20

210 ISO 11453:1996 Statistical interpretation of data -- Tests and confidence intervals relating to proportions GOST ISO 11453-2005 Trim. I 03.120.30

Pagina 12 din 170





211 CEN/TR 115-3:2009Safety of escalators and moving walks - Part 3: Correlation between EN 115:1995 and its amendments and EN 115-1:2008

Trim. I 91.140.90

212 CEN/TS 115-4:2015Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards

Trim. I 91.140.90

213 ISO/IEC 11576:1994Information technology -- Procedure for the registration of algorithms for the lossless compression of data

GOST ISO/CEI 11576-98 Trim. I 35.220.20

214 EN 1169:1999Precast concrete products - General rules for factory production control of glass-fibre reinforced cement

Trim. I 91.100.30

215 EN 1170-1:1997Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix "Slump test" method

Trim. I 91.100.30

216 EN 1170-2:1997Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test"

Trim. I 91.100.30

217 EN 1170-3:1997Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC

Trim. I 91.100.30

218 EN 1170-4:1997Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method

Trim. I 91.100.30

219 EN 1170-5:1997Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method

Trim. I 91.100.30

220 EN 1170-6:1997Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density

Trim. I 91.100.30

221 EN 1170-8:2008 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test Trim. I 91.100.40

222 EN 1183:1997Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance

Trim. I 67.250

223 EN 1184:1997Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles

Trim. I 67.250

224 ISO 11843-3:2003Capability of detection -- Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used

GOST ISO 11843-3-2005 Trim. I 03.120.30 17.020

225 ISO 11843-4:2003Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value

GOST ISO 11843-4-2005 Trim. I 17.020 03.120.30

226 EN ISO 11855-1:2015Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definition, symbols, and comfort criteria (ISO 11855-1:2012)

Trim. I 91.140.10 91.140.30

227 EN ISO 11855-2:2015Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2012)

Trim. I 91.140.10 91.140.30

228 EN ISO 11855-3:2015Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012)

Trim. I 91.140.10 91.140.30

Pagina 13 din 170





229 EN ISO 11855-4:2015Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2012)

Trim. I 91.140.10 91.140.30

230 EN ISO 11855-5:2015Building environment design - Design , dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012)

Trim. I 91.140.10 91.140.30

231 ISO 11862:1993 Earth-moving machinery -- Auxiliary starting aid electrical connector GOST ISO 11862-2001 Trim. I 53.100

232 EN 12002:2008Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts

Trim. I 91.100.10

233EN 12014-1:1997/A1:1999

Foodstuffs - Determination of nitrate and/or nitrite content - Part 1: General considerations Trim. I 67.050

234 EN 12045:2000 Shutters and blinds power operated - Safety in use - Measurement of the transmitted force Trim. I 91.060.50

235 EN 12048:1996Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying at (105 +/- 2)°C (ISO 8190:1992 modified)

Trim. I 65.080

236 EN 12049:1996Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure (ISO 8189:1992 modified)

Trim. I 65.080

237 ISO 1208:1982 Spices and condiments -- Determination of filthGOST 28880-90 (ISO 1208-82)

Trim. I 67.220.10

238 EN 12088:2013Thermal insulating products for building applications - Determination of long term water absorption by diffusion

Trim. I 91.100.60

239 EN 12109:1999 Vacuum drainage systems inside buildings Trim. I 91.140.80

240 EN 12137:1997Fruit and vegetable juices - Determination of tartaric acid in grape juices - Method by high performance liquid chromatography

Trim. I 67.160.20

241 EN 12138:1997Fruit and vegetable juices - Enzymatic determination of D-malic acid content - NAD spectrometric method

Trim. I 67.160.20

242 EN 1217:1997Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles

Trim. I 67.250 81.060.20

243 EN 12188:1999Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents

Trim. I 91.080.40

244 EN 12190:1998Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar

Trim. I 91.100.30

245 EN 12192-1:2002Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar

Trim. I 91.080.40 91.100.10

246EN 12195-1:2010/AC:2014

Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces Trim. I 55.180.99

247 EN 12213:1998 Cryogenic vessels - Methods for performance evaluation of thermal insulation Trim. I 27.200

248 EN 122340:2002 Sectional Specification: Radio frequency coaxial connectors - Series MMCX Trim. I 33.120.30

Pagina 14 din 170





249 EN 12240:1997Touch and close fasteners - Determination of the overall and effective widths of tapes and the effective width of a closure

Trim. I 61.040

250 ISO 12240-1:1998 Spherical plain bearings -- Part 1: Radial spherical plain bearingsGOST 3635-78 (ISO 6124-1-82, ISO 6124-2-82, ISO 6124-3-82, ISO 6125-82)

Trim. I 21.100.10

251 EN 12241:1999 Touch and close fasteners - Method for closure prior to washing and drying or dry cleaning Trim. I 61.040

252 EN 12242:1999 Touch and close fasteners - Determination of peel strength Trim. I 61.040

253 EN 12243:1999Touch and close fasteners - Determination of dimensional change in washing and drying and dry cleaning

Trim. I 61.040

254 EN 12246:1999 Quality classification of timber used in pallets and packaging Trim. I 55.040 55.180.20 79.040

255 EN 12248:1999 Sawn timber used in industrial packaging - Permitted deviations and preferential sizes Trim. I 55.040 79.040

256 EN 12249:1999 Sawn timber used in pallets - Permitted deviations and guidelines for dimensions Trim. I 55.180.20 79.040

257 EN 12309-3:2014Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Test conditions

Trim. I 27.080 91.140.30

258 EN 12309-4:2014Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 4: Test methods

Trim. I 27.080 91.140.30

259 EN 12309-5:2014Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 5: Requirements

Trim. I 27.080 91.140.30

260 EN 12309-6:2014Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 6: Calculation of seasonal performances

Trim. I 27.080 91.140.30

261 EN 12309-7:2014Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 7: Specific provisions for hybrid appliances

Trim. I 27.080 91.140.30

262 EN 12320:2012 Building hardware - Padlocks and padlock fittings - Requirements and test methods Trim. I 91.190

263 EN 12323:2005 AIDC technologies - Symbology specifications - Code 16K Trim. I 35.040.50

264 EN 12324-1:1998 Irrigation techniques - Reel machine systems - Part 1: Size series Trim. I 65.060.35

265 EN 12324-2:1999Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines

Trim. I 65.060.35

266 EN 12324-3:1999 Irrigation techniques - Reel machine systems - Part 3: Presentation of technical characteristics Trim. I 65.060.35

267 EN 12324-4:1999 Irrigation techniques - Reel machine systems - Part 4: Check list of users requirements Trim. I 65.060.35

268 EN 12325-1:1998Irrigation techniques - Centre pivot and moving lateral systems - Part 1: Presentation of the technical characteristics

Trim. I 65.060.35

269 EN 12325-2:1999Irrigation techniques - Centre pivot and moving lateral systems - Part 2: Minimum performances and technical characteristics

Trim. I 65.060.35

Pagina 15 din 170





270EN 12325-2:1999/AC:1999

Irrigation techniques - Centre pivot and moving lateral systems - Part 2: Minimum performances and technical characteristics

Trim. I 65.060.35

271 EN 12325-3:1999Irrigation techniques - Centre pivot and moving lateral systems - Part 3: Terminology and classification

Trim. I 65.060.35

272 CR 1234:1993Standardization programme - European Standards in the field of Construction products as defined by the Directive 89/106/EEC

Trim. I 91.040

273 CR 12340:1996 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems Trim. I 55.020

274 EN 1235:1995 Solid fertilizers - Test sieving (ISO 8397:1988 modified) Trim. I 65.080

275 EN 1235:1995/A1:2003 Solid fertilizers - Test sieving Trim. I 65.080

276 EN 12375:2009 Packaging - Flexible aluminium tubes - Wall thickness determination method Trim. I 55.120

277 EN 12377:2014 Packaging - Flexible tubes - Test method for the air tightness of closures Trim. I 55.120

278 EN 12390-11:2015Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion

SM CEN/TS 12390-11:2015 Trim. I 91.100.30

279 EN 12405-2:2012 Gas meters - Conversion devices - Part 2: Energy conversion Trim. I 91.140.40

280 EN 12405-3:2015 Gas meters - Conversion devices - Part 3: Flow computer Trim. I 91.140.40

281 EN 12467:2012+A1:2016 Fibre-cement flat sheets - Product specification and test methods SM EN 12467:2014 Trim. I 03.100.423 35.240.483

282 EN 12484-1:1999Irrigation techniques - Automatic turf irrigation systems - Part 1: Definition of the programme of equipment by the owner

Trim. I 65.060.35

283 EN 12484-2:2000Irrigation techniques - Automatic turf irrigation systems - Part 2: Design and definition of typical technical templates

Trim. I 65.060.35

284 EN 12484-3:2000Irrigation techniques - Automatic turf irrigation systems - Part 3: Automatic control and system management

Trim. I 65.060.35

285 EN 12484-4:2002 Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and Acceptance Trim. I 65.060.35

286 EN 12484-5:2002 Irrigation techniques - Automatic turf irrigation systems - Part 5: Testing methods of systems Trim. I 65.060.35

287 EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices SM SR EN 125:2011 Trim. I 27.060.20

288 EN 125000:1997 Generic Specification: Cores made of ferrite materials Trim. I 29.100.10

289 ISO 12508:1994 Earth-moving machinery -- Operator station and maintenance areas -- Bluntness of edges GOST ISO 12508-2000 Trim. I 53.100

290 EN 12514-1:2000Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks

Trim. I 27.060.10

291 EN 12514-2:2000Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters

Trim. I 27.060.10

292 EN 12522-1:1998Furniture removal activities - Furniture removal for private individuals - Part 1: Service specification

Trim. I 03.080.30

Pagina 16 din 170





293 EN 12522-2:1998Furniture removal activities - Furniture removal for private individuals - Part 2: Provision of service

Trim. I 03.080.30

294 EN 12543-1:1999Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method

Trim. I 19.100

295 EN 12543-2:2008Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

Trim. I 19.100

296 EN 12543-3:1999Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method

Trim. I 19.100

297 EN 12543-4:1999Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method

Trim. I 19.100

298 EN 12543-5:1999Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes

Trim. I 19.100

299 EN 12544-1:1999Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method

Trim. I 19.100

300 EN 12544-2:2000Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method

Trim. I 19.100

301 EN 12544-3:1999Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method

Trim. I 19.100

302 EN 12546-1:2000Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs

Trim. I 67.250

303EN 12546-1:2000/AC:2005

Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs

Trim. I 67.250

304 EN 12546-2:2000Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes

Trim. I 67.250

305 EN 12546-3:2000Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs

Trim. I 67.250

306 EN 125500:1996Sectional Specification: Magnetic oxide ring cores for interference suppression and low level signal transformer applications

Trim. I 29.100.10

307EN ISO 12567-1:2010/AC:2010

Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors - Technical Corrigendum 1 (ISO 12567-1:2010/Cor 1:2010)

Trim. I 91.060.50 91.120.10

308EN ISO 12570:2000/A1:2013

Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature - Amendment 1 (ISO 12570:2000/Amd 1:2013)

Trim. I 91.100.01

309 EN 12571:1998Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing

Trim. I 67.250

310 EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete SM EN 12602+A1:2014 Trim. I 03.100.277 35.240.337

Pagina 17 din 170





311 EN 12614:2004Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers

Trim. I 91.080.40

312 EN 12615:1999Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength

Trim. I 91.080.40

313 EN 12617-2:2004Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage

Trim. I 91.080.40

314 EN 12617-3:2002Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents

Trim. I 91.080.40 91.100.10

315 EN 12618-3:2004Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method

Trim. I 91.080.40

316 EN 12630:1999Fruit and vegetable juices - Determination of glucose, fructose, sorbitol and sucrose contents - Method using high performance liquid chromatography

Trim. I 67.160.20

317 EN 12631:1999Fruit and vegetable juices - Enzymatic determination of D- and L-lactic acid (lactate) content - NAD spectrometric method

Trim. I 67.160.20

318 EN 12632:1999Fruit and vegetable juices - Enzymatic determination of acetic acid (acetate) content - NAD Spectrometric method

Trim. I 67.160.20

319 CEN/TS 12633:2014 Method of polishing specimens prior to the measurement of slip and skid resistance Trim. I 93.080.20

320 EN 12668-2:2010Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes

Trim. I 19.100

321 EN 12668-3:2013Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment

Trim. I 19.100

322 EN 12674-2:2001 Roll containers - Part 2: General design and safety principles Trim. I 55.180.10

323 EN 12674-3:2004 Roll containers - Part 3: Test methods Trim. I 55.180.10

324EN 12674-3:2004/AC:2006

Roll containers - Part 3: Test methods Trim. I 55.180.10

325 EN 12674-4:2015 Roll containers - Part 4: Performance requirements Trim. I 55.180.10

326 EN 12675:2000 Traffic signal controllers - Functional safety requirements Trim. I 93.080.30

327 ISO 12678-1:1996Refractory products -- Measurement of dimensions and external defects of refractory bricks -- Part 1: Dimensions and conformity to drawings

GOST 30762-2001 (ISO 12678-1-96, ISO 12678-2-96)

Trim. I 81.080

328 ISO 12678-2:1996Refractory products -- Measurement of dimensions and external defects of refractory bricks -- Part 2: Corner and edge defects and other surface imperfections

GOST 30762-2001 (ISO 12678-1-96, ISO 12678-2-96)

Trim. I 81.080

329 EN 12679:1999Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method

Trim. I 19.100

330 CR 12695:1997 Metal chimneys - Corrosion resistance requirements and test methods Trim. I 91.060.40

Pagina 18 din 170





331 EN 12707:2009Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l

Trim. I 55.140

332 EN 12709:2000Plastics drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l

Trim. I 55.140

333 EN 12710:2006Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l

Trim. I 55.140

334 EN 12712:2000Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm

Trim. I 55.140

335 EN 12713:2000 Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l Trim. I 55.140

336 EN 12714:2009 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L Trim. I 55.140

337 EN 12726:2000Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules

Trim. I 55.100

338 EN 12764:2015 Sanitary appliances - Specification for whirlpool baths Trim. I 91.140.70

339 CR 12793:1997 Measurement of the carbonation depth of hardened concrete Trim. I 91.100.30

340 EN 12795:2003Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC data link layer: medium access and logical link control

Trim. I 35.100.20 35.240.60

341 EN 12802:2011 Road marking materials - Laboratory methods for identification Trim. I 93.080.20

342 CR 12804:1997 Conceptual model and taxonomy for information systems engineering Trim. I 35.240.01

343 EN 12810-1:2003 Façade scaffolds made of prefabricated components - Part 1: Products specifications Trim. I 91.220

344 EN 12810-2:2003Façade scaffolds made of prefabricated components - Part 2: Particular methods of structural design

Trim. I 91.220

345 EN 12811-1:2003 Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design Trim. I 91.220

346 EN 12811-3:2002 Temporary works equipment - Part 3: Load testing Trim. I 91.220

347EN 12811-3:2002/AC:2004

Temporary works equipment - Part 3: Load testing Trim. I 91.200

348 EN 12811-4:2013Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design

Trim. I 91.220

349 EN ISO 12813:2015Electronic fee collection - Compliance check communication for autonomous systems (ISO 12813:2015)

Trim. I 03.220.20 35.240.60

350 EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013) Trim. I 55.100

351 EN ISO 12821:2015 Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2013) Trim. I 55.100

352 EN 12825:2001 Raised access floors Trim. I 91.060.30

353 ISO 12830:2011Paper, board and pulps -- Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium

GOST 18462-77 (ISO 779-82)

Trim. I 85.040 85.060

Pagina 19 din 170





354 EN 12833:2001 Skylight and conservatory roller shutters - Resistance to snow load - Test method Trim. I 91.010.30 91.060.50

355 EN 12834:2003Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC application layer

Trim. I 35.100.70 35.240.60

356 EN 12835:2000 Airtight shutters - Air permeability test Trim. I 91.060.50

357 EN 12846-1:2011Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions

Trim. I 91.100.50

358 EN 12875-1:2005Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles

Trim. I 67.250 97.040.40 97.040.60

359 EN 12875-2:2001 Mechanical dishwashing resistance of utensils - Part 2: Inspection of non-metallic articles Trim. I 67.250 97.040.40 97.040.60

360 EN 12875-4:2006 Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles Trim. I 67.250 97.040.40 97.040.60

361 EN 12875-5:2006 Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic catering articles Trim. I 67.250 97.040.40 97.040.60

362 ISO 12900:2015 Hard coal -- Determination of abrasivenessGOST 30827-2002 (ISO 12900-97)

Trim. I 73.040

363 EN 12946:2000Liming materials - Determination of calcium content and magnesium content - Complexometric method

Trim. I 65.080

364 EN 12946:2000/AC:2002Liming materials - Determination of calcium content and magnesium content - Complexometric method

Trim. I 65.080

365 EN 12947:2000Liming materials - Determination of magnesium content - Atomic absorption spectrometric method

Trim. I 65.080

366 CR 12952-17:2002Water boilers and auxiliary installations - Part 17: Guideline for the involvement of an inspection body independent of the manufacturer

Trim. I 27.040

367 CR 12953-14:2002Shell boilers - Part 14: Guideline for involvement of an inspection body independent of the manufacturer

Trim. I 27.060.30 27.100

368 EN 12956:1999/A1:2001Wallcoverings in roll form - Determination of dimensions, straightness, spongeability and washability

Trim. I 91.180

369 EN 1298:1996Mobile access and working towers - Rules and guidelines for the preparation of an instruction manual

Trim. I 91.220

370 EN 12980:2000Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance

Trim. I 67.250

371 CLC Guide 13:2016 IEC - CENELEC Agreement on Common planning of new work and parallel voting Trim. I 03.100.309 35.240.369

372 EN 13007:1999 Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l Trim. I 55.140

373 EN 13008:1999 Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l Trim. I 55.140

374 EN 13010:2003 Packaging - Unit packaging - Dimensions and requirements for pegboard display Trim. I 55.020

Pagina 20 din 170





375 EN 13011:2000Transportation services - Good transport chains - System for declaration of performance conditions

Trim. I 55.020

376 EN 13026:2001Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml

Trim. I 55.120

377 EN 13027:2001Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity

Trim. I 55.120

378 EN 13028:2001Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes

Trim. I 55.120

379 EN 13028:2001/AC:2002Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes

Trim. I 55.120

380 EN 13029:2009 Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures Trim. I 55.120

381 EN 13031-1:2001 Greenhouses - Design and construction - Part 1: Commercial production greenhouses Trim. I 65.040.30

382EN 13032-2:2004/AC:2007

Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places

Trim. I 17.180.20 29.140.01

383 EN 13032-4:2015Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires

Trim. I 17.180.20 29.140.99

384 EN 13037:2011 Soil improvers and growing media - Determination of pH Trim. I 65.080

385 EN 13040:2007Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density

Trim. I 65.080

386 EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances Trim. I 55.120

387 EN 13046:2000 Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances Trim. I 55.120

388 EN 13047:2000 Packaging - Flexible conical metallic tubes - Dimensions and tolerances Trim. I 55.120

389 EN 13048:2009 Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method Trim. I 55.120

390 EN 13050:2011Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray

Trim. I 91.060.10

391 EN 13054:2001Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package

Trim. I 55.180.99

392 EN 13057:2002Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption

Trim. I 91.080.40

393 EN 13067:2012 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies Trim. I 03.100.30 25.160.10

394 EN 13068-1:1999Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties

Trim. I 19.100

395 EN 13068-2:1999Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices

Trim. I 19.100

Pagina 21 din 170





396 EN 13068-3:2001Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays

Trim. I 19.100

397 EN 13074-1:2011Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation

Trim. I 91.100.50

398 EN 13074-2:2011Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation

Trim. I 91.100.50

399 EN 13080:2002Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods

Trim. I 65.060.25

400 EN 13107:2015/AC:2016Safety requirements for cableway installations designed to carry persons - Civil engineering works

Trim. I 03.100.426 35.240.486

401 EN ISO 13141:2015Electronic fee collection - Localisation augmentation communication for autonomous systems (ISO 13141:2015)

Trim. I 03.220.20 35.240.60

402 EN 13141-11:2015Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units

Trim. I 91.140.30

403 ISO 13347-1:2004Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 1: General overview

SM GOST 31353.1:2009 (ISO 13347-1:2004)

Trim. I 23.120 17.140.20

404 ISO 13347-2:2004Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 2: Reverberant room method

SM GOST 31353.2:2009 (ISO 13347-2:2004)

Trim. I 23.120 17.140.20

405 ISO 13347-3:2004Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 3: Enveloping surface methods

SM GOST 31353.3:2009 (ISO 13347-3:2004)

Trim. I 23.120 17.140.20

406 ISO 13347-4:2004Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 4: Sound intensity method

SM GOST 31353.4:2009 (ISO 13347-4:2004)

Trim. I 23.120 17.140.20

407 EN 13366:2001Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients

Trim. I 65.080

408 EN 13372:2004Road Transport and Traffic Telematics (RTTT) - Dedicated short-range communication - Profiles for RTTT applications

Trim. I 35.100.05 35.240.60

409 EN 13377:2002 Prefabricated timber formwork beams - Requirements, classification and assessment Trim. I 91.220

410 EN 13382:2002 Flat pallets for materials handling - Principal dimensions Trim. I 55.180.20

411 EN 13393:2001 Packaging - Specification for Edge protectors Trim. I 55.040

412 EN 13394:2001 Packaging - Specification for non-metallic tensional strapping Trim. I 55.040

413 EN 13395-1:2002Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars

Trim. I 91.080.40 91.100.10

414 EN 13395-2:2002Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar

Trim. I 91.080.40 91.100.10

415 EN 13395-4:2002Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead

Trim. I 91.080.40 91.100.10

Pagina 22 din 170





416 EN 13396:2004Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress

Trim. I 91.080.40

417 EN 13406:2002Agricultural machinery - Slurry tankers and spreading devices - Environmental protection - Requirements and test methods for the spreading precision

Trim. I 65.060.25

418 EN 13420:2011 Windows - Behaviour between different climates - Test method Trim. I 91.060.50

419 CWA 13449-1:1998Extensions for Financial Services (XFS) interface specification - Part 1: Application Programming Interface (API) - Service Provider Interface (SPI) - Programmer's Reference

Trim. I 35.200 35.240.15 35.240.40

420 CWA 13449-10:1998Extensions for Financial Services (XFS) interface specification - Part 10: Sensors and indicators Unit Device Class Interface - Programmer's Reference

Trim. I 35.200 35.240.40

421 CWA 13449-11:1998Extensions for Financial Services (XFS) interface specification - Part 11: Vendor Dependent Mode Device Class Interface - Programmer's Reference

Trim. I 35.200 35.240.40

422 CWA 13449-12:1998Extensions for Financial Services (XFS) interface specification - Part 12: Camera Device Class Interface - Programmer's Reference

Trim. I 35.200 35.240.40

423 CWA 13449-2:1998 Extensions for Financial Services (XFS) interface specification - Part 2: Service Classes Definition Trim. I 35.200 35.240.15 35.240.40

424 CWA 13449-3:1998Extensions for Financial Services (XFS) interface specification - Part 3: Printer Device Class Interface Programmer's Reference

Trim. I 35.200 35.240.15

425 CWA 13449-4:1998Extensions for Financial Services (XFS) interface specification - Part 4: Identification Card Device Class Interface - Programmer's Reference

Trim. I 35.200 35.240.15

426 CWA 13449-5:1998Extensions for Financial Services (XFS) interface specification - Part 5: Cash Dispenser Device Class Interface - Programmer's Reference

Trim. I 35.200 35.240.40

427 CWA 13449-6:1998Extensions for Financial Services (XFS) interface specification - Part 6: PIN Keypad Device Class Interface - Programmer's Reference

Trim. I 35.200 35.240.15 35.240.40

428 CWA 13449-7:1998Extensions for Financial Services (XFS) interface specification - Part 7: Check Reader/Scanner Device Class Interface - Programmer's Reference

Trim. I 35.200

429 CWA 13449-8:1998Extensions for Financial Services (XFS) interface specification - Part 8: Depository Device Class Interface - Programmer's Reference

Trim. I 35.200

430 CWA 13449-9:1998Extensions for Financial Services (XFS) interface specification - Part 9: Text Terminal Unit Device Class Interface - Programmer's Reference

Trim. I 35.200 35.240.40

431 EN 13461:2009 Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances Trim. I 55.120

432 EN 13466-1:2001Fertilizers - Determination of water content (Karl Fischer methods) - Part 1: Methanol as extracting medium

Trim. I 65.080

433 EN 13466-2:2001Fertilizers - Determination of water content (Karl Fischer methods) - Part 2: 2-propanol as extracting medium

Trim. I 65.080

434 EN 13469:2012Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation

Trim. I 91.100.60

435 EN 13476-1:2007Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characteristics

Trim. I 93.030

Pagina 23 din 170





436 EN 13476-2:2007

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A

Trim. I 93.030

437 CEN/TS 13476-4:2013Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity

Trim. I 93.030

438 EN 13477-1:2001Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1: Equipment description

Trim. I 19.100

439 EN 13477-2:2010Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic

Trim. I 19.100

440 EN 13485:2001Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability

Trim. I 17.200.20 67.260

441 EN 13486:2001Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification

Trim. I 17.200.20 67.260

442 EN 13487:2003Heat exchangers - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement

Trim. I 17.140.20 27.060.30

443 CR 1350:1993 Investigation of syntaxes for existing interchange formats to be used in health care Trim. I 35.240.70

444EN 13508-2:2003+A1:2011

Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system

Trim. I 93.030

445 EN 1352:1996Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure

Trim. I 91.100.30

446 EN 13523-1:2009 Coil coated metals - Test methods - Part 1: Film thickness Trim. I 17.040.20 25.220.60

447 EN 13523-18:2002 Coil coated metals - Test methods - Part 18: Resistance to staining Trim. I 17.040.20 25.220.60

448 EN 13523-23:2015Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide

Trim. I 17.180.20 25.220.60

449 EN 13523-6:2002 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) Trim. I 17.040.20 25.220.60

450 EN 13535:2001 Fertilizers and liming materials - Classification Trim. I 65.080

451 EN 13545:2002 Pallet superstructures - Pallet collars - Test methods and performance requirements Trim. I 55.180.20

452 CEN/TR 13548:2004 General rules for the design and installation of ceramic tiling Trim. I 91.100.25

453 EN 13554:2011 Non-destructive testing - Acoustic emission testing - General principles Trim. I 19.100

454 EN 13566-2:2005Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes

Trim. I 93.030

455 CR 13582:1999 Heat meter installation - Some guidelines for selecting, installation and operation of heat meters Trim. I 17.200.10

Pagina 24 din 170





456 EN 13583:2012Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance

Trim. I 91.100.50

457 EN 13588:2008Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test

Trim. I 91.100.50 93.080.20

458 EN 13589:2008Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method

Trim. I 91.100.50

459 EN 13590:2003Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity

Trim. I 55.080

460 EN 13598-1:2010Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers

Trim. I 93.030

461 CEN/TS 13598-3:2012Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity

Trim. I 93.030

462 EN 13606-2:2007Health informatics - Electronic health record communication - Part 2: Archetypes interchange specification

Trim. I 35.240.80

463 EN 13609-1:2005Health informatics - Messages for maintenance of supporting information in healthcare systems - Part 1: Updating of coding schemes

Trim. I 35.240.80

464 EN 13625:2001Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage

Trim. I 19.100

465 EN 13626:2003 Packaging - Box pallets - General requirements and test methods Trim. I 55.180.20

466 EN 13650:2001 Soil improvers and growing media - Extraction of aqua regia soluble elements Trim. I 65.080

467 EN 13651:2001 Soil improvers and growing media - Extraction of calcium chloride/DTPA (CAT) soluble nutrients Trim. I 65.080

468 EN 13654-1:2001Soil improvers and growing media - Determination of nitrogen - Part 1: Modified Kjeldahl method

Trim. I 65.080

469 EN 13654-2:2001 Soil improvers and growing media - Determination of nitrogen - Part 2: Dumas method Trim. I 65.080

470 EN 1367-6:2008Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl)

Trim. I 91.100.15

471 EN 1367-7:2014Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates

Trim. I 91.100.15

472 EN 1367-8:2014Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates

Trim. I 91.100.15

473 EN 13687-1:2002Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion

Trim. I 91.080.40

Pagina 25 din 170





474 EN 13687-2:2002Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock)

Trim. I 91.080.40

475 EN 13687-3:2002Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact

Trim. I 91.080.40

476 EN 13687-4:2002Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling

Trim. I 91.080.40

477 EN 13687-5:2002Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock

Trim. I 91.080.40

478 CR 13694:1999Health Informatics - Safety and Security Related Software Quality Standards for Healthcare (SSQS)

Trim. I 35.240.80

479 EN 13698-1:2003Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets

Trim. I 55.180.20

480 EN 13698-2:2009Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets

Trim. I 55.180.20

481 EN 1370:2011 Founding - Examination of surface condition Trim. I 17.040.20 77.180

482 EN 13703:2003 Bitumen and bituminous binders - Determination of deformation energy Trim. I 91.100.50

483 CEN/TR 13737-1:2012Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure - Part 1: General

Trim. I 91.140.40

484 CEN/TR 13737-2:2014Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards

Trim. I 91.140.40

485 EN 13739-1:2011Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements

Trim. I 65.060.25

486 EN 13739-2:2011Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods

Trim. I 65.060.25

487 EN 13740-1:2003Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 1: Requirements

Trim. I 65.060.25

488 EN 13740-2:2003Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 2: Test methods

Trim. I 65.060.25

489 EN 13741:2003 Thermal performance acceptance testing of mechanical draught series wet cooling towers Trim. I 17.200.10 27.200

490 EN 13757-4:2013Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands)

Trim. I 33.200 35.100.10 35.100.20

491 EN 13757-5:2015 Communication systems for meters - Part 5: Wireless M-Bus relaying Trim. I 33.200 35.100.10 35.100.20

492 EN 13757-6:2015 Communication systems for meters - Part 6: Local Bus Trim. I 33.200 35.100.10 35.100.20

493 EN 1376:1996/AC:1996Foodstuffs - Determination of saccharin in table top sweetener preparations - Spectrometric method

Trim. I 67.180.10

494 EN 1377:1996/AC:1996Foodstuffs - Determination of acesulfame K in table top sweetener preparations - Spectrometric method

Trim. I 67.180.10

Pagina 26 din 170





495 EN 1378:1996/AC:1996Foodstuffs - Determination of aspartame in table top sweetener preparations - Method by high performance liquid chromatography

Trim. I 67.180.10

496 EN 13782:2015 Temporary structure - Tents - Safety Trim. I 91.040.99

497 EN 1379:1996/AC:1996Foodstuffs - Determination of cyclamate and saccharin in liquid table top sweetener preparations - Method by high performance liquid chromatography

Trim. I 67.180.10

498 CEN/TR 13801:2014Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation

Trim. I 91.140.80

499 CEN/TR 13833:2003 Qualification of construction enterprises Trim. I 03.100.01 91.010.01

500 CEN/TS 13853:2003Swap bodies for combined transport - Stackable swap bodies type C 745-S16 - Dimensions, design requirements and testing

Trim. I 55.180.10

501 EN 13863-4:2012Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres

Trim. I 93.080.20

502 EN 13876:2002Transport - Logistics and Services - Goods transport chains - Code of practice for the provision of cargo transport services

Trim. I 55.020

503 EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C Trim. I 93.080.20

504 EN 13880-10:2003Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression

Trim. I 93.080.20

505 EN 13880-11:2003Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements

Trim. I 93.080.20

506 EN 13880-12:2003Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)

Trim. I 93.080.20

507 EN 13880-13:2003Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)

Trim. I 93.080.20

508 EN 13880-2:2003Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25°C

Trim. I 93.080.20

509 EN 13880-3:2003Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)

Trim. I 93.080.20

510 EN 13880-4:2003Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value

Trim. I 93.080.20

511 EN 13880-6:2004 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing Trim. I 93.080.20

512 EN 13880-7:2003 Hot applied joint sealants - Part 7: Function testing of joint sealants Trim. I 93.080.20

513 EN 13880-8:2003Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

Trim. I 93.080.20

514 EN 13880-9:2003Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements

Trim. I 93.080.20

515 EN 1388-1:1995Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware

Trim. I 67.250

Pagina 27 din 170





516 EN 1388-2:1995Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware

Trim. I 67.250

517 EN 13891:2003 Tensional strapping - Guide to selection and use of tensional strapping Trim. I 55.040

518 EN 13894-2:2002Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2: After hardening

Trim. I 91.080.40

519 CR 13901:2000The use of the concept of concrete families for the production and conformity control of concrete

Trim. I 91.100.30

520 CR 13902:2000 Test methods for determining the water/cement ratio of fresh concrete Trim. I 91.100.30

521 CR 13907:2000Information Technology - Character Repertoire and Coding Transformations - General model for graphic character transformations

Trim. I 35.040.30

522 EN 13924-1:2015Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens

Trim. I 93.080.20

523 EN 13925-1:2003Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles

Trim. I 19.100

524 EN 13925-2:2003Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures

Trim. I 19.100

525 EN 13925-3:2005Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments

Trim. I 19.100

526 EN 13927:2003 Non-destructive testing - Visual testing - Equipment Trim. I 19.100

527 CR 13928:2000 Information Technology - Guide to the use of character set standards in Europe Trim. I 35.040.10

528 CR 13933:2000 Masonry cement - Testing for workability (cohesivity) Trim. I 91.100.10

529 CR 13935:2000 Non-destructive testing - Generic NDE data format model Trim. I 19.100

530 CWA 13937-1:2000J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 1: Base Architecture - Programmer's Reference

Trim. I 35.240.40

531 CWA 13937-10:2000J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 10: Check Reader/Scanner Device Class Interface - Programmer's Reference

Trim. I 35.240.40

532 CWA 13937-2:2000J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 2: Pin Keypad Device Class Interface - Programmer's Reference

Trim. I 35.240.40

533 CWA 13937-3:2000J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 3: Magnetic Stripe & Chip Card Device Class Interface - Programmer's Reference

Trim. I 35.240.40

534 CWA 13937-4:2000J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 4: Text Input/Output Device Interface - Programmer's Reference

Trim. I 35.240.40

535 CWA 13937-5:2000J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 5: Cash Dispenser, Recycler and ATM Device Class Interface - Programmer's Reference

Trim. I 35.240.40

536 CWA 13937-6:2000J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 6: Printer Device Class Interface - Programmer's Reference

Trim. I 35.240.40

537 CWA 13937-7:2000J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 7: Alarm Device Interface - Programmer's Reference

Trim. I 35.240.40

Pagina 28 din 170





538 CWA 13937-8:2000J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 8: Sensors and Indicators Unit Device Class Interface - Programmer's Reference

Trim. I 35.240.40

539 CWA 13937-9:2000J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 9: Depository Device Class Interface - Programmer's Reference

Trim. I 35.240.40

540 CR 13960:2000 Solid fertilizers - Study on homogeneity Trim. I 65.080

541 CR 13962:2000 Guidelines for the application of LAC-components in structures Trim. I 91.100.30

542 EN 13971:2012Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid

Trim. I 65.080

543 EN 13997:2003Irrigation techniques - Connection and control accessories for use in irrigation systems - Technical characteristics and testing

Trim. I 65.060.35

544 CEN/TS 14014:2015Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling

Trim. I 03.240 35.240.69

545 EN 14024:2004Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment

Trim. I 91.060.10 91.060.50

546 EN 14037-1:2016Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements

SM SR EN 14037-1:2010 Trim. I 03.100.283 35.240.343

547 CEN/TS 14038-2:2011Electrochemical re-alkalization and chloride extraction treatments for rein-forced concrete - Part 2: Chloride extraction

Trim. I 91.100.30

548 EN 14049:2003 Water application intensity - Calculation principles and measurement methods Trim. I 65.060.35

549 EN 14049:2003/A1:2005Irrigation techniques - Water application intensity - Calculation principles and measurement methods

Trim. I 65.060.35

550 CWA 14050-1:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 1: Application Programming Interface (API) - Service Provider Interface (SPI) - Programmer's Reference

Trim. I 35.200 35.240.15 35.240.40

551 CWA 14050-10:2002Extensions for Financial Services (XFS) interface specification - Release 3.01 - Part 10: Sensors and Indicators Unit Device Class Interface

Trim. I 35.200 35.240.40

552 CWA 14050-11:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 11: Vendor Dependent Mode Class Interface

Trim. I 35.200 35.240.40

553 CWA 14050-12:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 12: Camera Device Class Interface

Trim. I 33.160.40 35.200 35.240.40

554 CWA 14050-13:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 13: Alarm Device Class Interface

Trim. I 35.200 35.240.40

555 CWA 14050-14:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 14: Card Embossing Unit Class Interface

Trim. I 35.200 35.240.15 35.240.40

556 CWA 14050-15:2003Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 15: Cash In Module Device Class Interface - Programmer's Reference

Trim. I 35.200 35.240.40

557 CWA 14050-16:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 16: Application Programming Interface (API) - Service Provider Interface (SPI) - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer's Reference

Trim. I 35.200 35.240.15 35.240.40

Pagina 29 din 170





558 CWA 14050-17:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 17: Printer Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer's Reference

Trim. I 35.200 35.240.40

559 CWA 14050-18:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 18: Identification Card Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer's Reference

Trim. I 35.200 35.240.15

560 CWA 14050-19:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 19: Cash Dispenser Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer's Reference

Trim. I 35.200 35.240.40

561 CWA 14050-2:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 2: Service Classes Definition

Trim. I 35.200 35.240.15 35.240.40

562 CWA 14050-20:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 20: Pin Keypad Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer's Reference

Trim. I 35.200 35.240.15 35.240.40

563 CWA 14050-21:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 21: Depository Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer's Reference

Trim. I 35.200 35.240.40

564 CWA 14050-22:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 22: Text Terminal Unit Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer's Reference

Trim. I 35.200 35.240.40

565 CWA 14050-23:2002Extensions for Financial Services (XFS) interface specification - Release 3.01 - Part 23: Sensors and Indicators Unit Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.01 (this CWA) - Programmer's Reference

Trim. I 35.200 35.240.40

566 CWA 14050-24:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 24: Camera Device Class Interface - Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA) - Programmer's Reference

Trim. I 33.160.40 35.200 35.240.40

567 CWA 14050-25:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 25: Identification Card Device Class Interface - PC/SC Integration Guidelines

Trim. I 35.200 35.240.15

568 CWA 14050-26:2003Extensions for Financial Services (XFS) interface specification - Release 3.02 - Part 26: Identification Card Unit Device Class Interface - Migration from Version 3.00 to Version 3.02 - Programmer's Reference

Trim. I 35.200 35.240.15

569 CWA 14050-27:2003Extensions for Financial Services (XFS) interface specification - Release 3.02 - Part 27: PIN Keypad Device Class Interface - Migration from Version 3.00 to Version 3.02 - Programmer's Reference

Trim. I 35.200 35.240.15 35.240.40

570 CWA 14050-28:2003Extensions for Financial Services (XFS) interface specification - Release 3.02 - Part 28: Cash In Module Device Class Interface - Migration from Version 3.00 to Version 3.02 - Programmer's Reference

Trim. I 35.200 35.240.40

571 CWA 14050-29:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 29: XFS MIB Architecture and SNMP Extensions MIB Version 1.1

Trim. I 35.200 35.240.15 35.240.40

572 CWA 14050-3:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 3: Printers Device Class Interface

Trim. I 35.200 35.240.40

Pagina 30 din 170





573 CWA 14050-30:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 30: XFS MIB Device Specific Definitions - Printer Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

574 CWA 14050-31:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 31: XFS MIB Device Specific Definitions - Identification Card Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

575 CWA 14050-32:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 32: XFS MIB Device Specific Definitions - Cash Dispenser Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

576 CWA 14050-33:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 33: XFS MIB Device Specific Definitions - PIN Keypad Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

577 CWA 14050-34:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 34: XFS MIB Device Specific Definitions - Check Reader/Scanner Device Class MIB 1.1

Trim. I 35.220 35.240.15 35.240.40

578 CWA 14050-35:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 35: XFS MIB Device Specific Definitions - Depository Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

579 CWA 14050-36:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 36: XFS MIB Device Specific Definitions - Text Terminal Unit Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

580 CWA 14050-37:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 37: XFS MIB Device Specific Definitions - Sensors and Indicators Unit Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

581 CWA 14050-38:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 38: XFS MIB Device Specific Definitions - Camera Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

582 CWA 14050-39:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 39: XFS MIB Device Specific Definitions - Alarm Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

583 CWA 14050-4:2003Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 4: Identification Card Device Class Interface - Programmer's Reference

Trim. I 35.200 35.240.15

584 CWA 14050-40:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 40: XFS MIB Device Specific Definitions - Card Embossing Unit Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

585 CWA 14050-41:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 41: XFS MIB Device Specific Definitions - Cash In Module Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

586 CWA 14050-42:2005Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 42: PIN Keypad Device Class Interface - Migration from Version 3.02 to Version 3.03 - Programmer's Reference

Trim. I 35.200 35.240.15 35.240.40

587 CWA 14050-43:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 43: XFS MIB Device Specific Definitions - Vendor Dependent Mode Device Class MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

588 CWA 14050-44:2007Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 44: XFS MIB Application Management MIB 1.1

Trim. I 35.200 35.240.15 35.240.40

589 CWA 14050-5:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 5: Cash Dispenser Device Class Interface

Trim. I 35.200 35.240.40

Pagina 31 din 170





590 CWA 14050-6:2005Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 6: PIN Keypad Device Class Interface - Programmer's Reference

Trim. I 35.200 35.240.15 35.240.40

591 CWA 14050-7:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 7: Check Reader/Scanner Device Class Interface

Trim. I 35.200 35.240.40

592 CWA 14050-8:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 8: Depository Device Class Interface

Trim. I 35.200 35.240.40

593 CWA 14050-9:2000Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 9: Text Terminal Unit Device Class Interface

Trim. I 35.200 35.240.40

594 EN 14053:2003Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction

Trim. I 55.160

595 EN 14054:2003 Packaging - Paper and paperboard packaging - Design of cartons Trim. I 55.160

596 EN 14055:2010+A1:2015 WC and urinal flushing cisterns SM SR EN 14055:2013 Trim. I 91.140.70

597 CR 14061:2000 Fertilizers - Determination of dust content Trim. I 65.080

598 EN 14064-2:2010Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products

Trim. I 91.100.60

599 EN 14069:2003 Liming materials - Description and minimum requirements Trim. I 65.080

600 CWA 14094:2001 European Culturally Specific ICT Requirements Trim. I 35.240.01

601 EN 14096-2:2003Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements

Trim. I 19.100 37.040.25

602 EN 14117:2004Products systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products

Trim. I 91.100.10

603 EN 14124:2004 Inlet valves for flushing cisterns with internal overflow Trim. I 91.140.70

604 EN 1414:1996 Touch and close fasteners - Cycling procedure for subsequent testing Trim. I 61.040

605 EN 1414:1996/A1:2000 Touch and close fasteners - Cycling procedure for subsequent testing Trim. I 61.040

606 EN 14149:2003 Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop Trim. I 55.180.40

607 EN 1415:1996 Touch and close fasteners - Behaviour of slit selvedges Trim. I 61.040

608 EN 1416:1996 Touch and close fasteners - Determination of curvature Trim. I 61.040

609 CWA 14172-1:2004 EESSI Conformity Assessment Guidance - Part 1: General introduction Trim. I 35.030 35.240.60

610 CWA 14172-2:2004 EESSI Conformity Assessment Guidance - Part 2: Certification Authority services and processes Trim. I 35.030 35.240.60

611 CWA 14172-3:2004EESSI Conformity Assessment Guidance - Part 3: Trustworthy systems managing certificates for electronic signatures

Trim. I 35.030

612 CWA 14172-4:2004EESSI Conformity Assessment Guidance - Part 4: Signature-creation applications and general guidelines for electronic signature verification

Trim. I 35.030

613 CWA 14172-5:2004 EESSI Conformity Assessment Guidance - Part 5: Secure signature-creation devices Trim. I 35.030

Pagina 32 din 170





614 CWA 14172-6:2004EESSI Conformity Assessment Guidance - Part 6: Signature-creation device supporting signatures other than qualified

Trim. I 35.030

615 EN 14183:2003 Step stools Trim. I 93.080.20

616EN ISO 14183:2008/AC:2012

Animal feeding stuffs - Determination of monensin, narasin and salinomycin contents - Liquid chromatographic method using post-column derivatization - Technical Corrigendum 1 (ISO 14183:2005/Cor 1:2010)

Trim. I 65.120

617 EN 14201:2004Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing

Trim. I 91.060.50

618 EN 14202:2004Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods

Trim. I 91.060.50

619 EN 14227-15:2015 Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils Trim. I 93.080.20

620 EN 14233:2002Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for migration testing

Trim. I 67.250 83.080.01

621 CEN/TS 14234:2002Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board- Guide to the selection of conditions and test methods for overall migration

Trim. I 67.250

622 CEN/TS 14235:2002Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration

Trim. I 67.250

623 EN 1424:1997/A1:2003 Road marking materials - Premix glass beads Trim. I 93.080.20

624 CEN/TR 14245:2014 Cement - Guidelines for the application of EN 197-2 Conformity Evaluation Trim. I 91.100.10

625 EN ISO 14253-5:2015Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)

Trim. I 17.040.40

626 EN 14267:2004 Irrigation techniques - Irrigation hydrants Trim. I 65.060.35

627 EN 14267:2004/AC:2008 Irrigation techniques - Irrigation hydrants Trim. I 65.060.35

628 EN 14268:2005 Irrigation techniques - Meters for irrigation water Trim. I 65.060.35

629 EN 14268:2005/AC:2007 Irrigation techniques - Meters for irrigation water Trim. I 65.060.35

630 ISO 14269-2:1997Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 2: Heating, ventilation and air-conditioning test method and performance

GOST ISO 14269-2-2003 Trim. I 65.060.01

631 ISO 14269-3:1997Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 3: Determination of effect of solar heating

GOST ISO 14269-3-2003 Trim. I 65.060.01

Pagina 33 din 170





632 ISO 14269-5:1997Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 5: Pressurization system test method

GOST ISO 14269-5-2003 Trim. I 65.060.01

633 CR 14270:2001 European keyboards - Guidelines and overview (ISO/IEC 9995) Trim. I 35.180 35.260

634 CR 14301:2002 Health informatics - Framework for security protection of healthcare communication Trim. I 35.240.80

635 CR 14302:2002 Health informatics - Framework for security requirements for intermittently connected devices Trim. I 35.240.80

636 EN 14303:2015Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification

SM EN 14303+A1:2013 Trim. I 91.100.60

637 EN 14304:2015Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification

SM EN 14304+A1:2013 Trim. I 91.100.60

638 EN 14306:2015Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification

SM EN 14306+A1:2013 Trim. I 91.100.60

639 EN 14307:2015Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification

SM EN 14307+A1:2013 Trim. I 91.100.60

640 EN 14308:2015Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification

SM EN 14308+A1:2013 Trim. I 91.100.60

641 EN 14309:2015Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification

SM EN 14308+A1:2013 Trim. I 91.100.60

642 CR 14311:2002 Packaging - Marking and material identification system Trim. I 55.020

643 EN 14313:2015Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification

SM EN 14313+A1:2013 Trim. I 91.100.60

644 EN 14314:2015Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification

SM EN 14314+A1:2014 Trim. I 91.100.60

645 EN 14315-2:2013Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products

Trim. I 91.100.60

646 EN 14318-2:2013Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products

Trim. I 91.100.60

647 EN 14319-2:2013Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products

Trim. I 91.100.60

648 EN 14320-2:2013Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products

Trim. I 91.100.60

649 CWA 14355:2004 Guidelines for the implementation of Secure Signature-Creation Devices Trim. I 35.030

650 EN 14364:2013Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints

Trim. I 93.030

Pagina 34 din 170





651 CWA 14365-1:2004 Guide on the Use of Electronic Signatures - Part 1: Legal and Technical Aspects Trim. I 35.030

652 CWA 14365-2:2004Guide on the Use of Electronic Signatures - Part 2: Protection Profile for Software Signature Creation Devices

Trim. I 35.030

653 EN 14367:2005 Non controllable backflow preventer with different pressure zones - Family C, type A Trim. I 91.140.60

654 CR 14378:2002Ventilation for buildings - Experimental determination of mechanical energy loss coefficients of air handling components

Trim. I 91.140.30

655 CR 14378:2002/AC:2002Ventilation for buildings - Experimental determination of mechanical energy loss coefficients of air handling components

Trim. I 91.140.30

656 CR 14380:2003 Lighting applications - Tunnel lighting Trim. I 93.080.40

657 CEN/TR 14381:2003Information technology - Character repertoire and coding transformations - European fallback rules

Trim. I 35.040.10

658 EN 14392:2007Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff

Trim. I 67.250 77.150.10

659 EN 14397-1:2010Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers

Trim. I 65.080

660 EN 14397-2:2004Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials

Trim. I 65.080

661 EN 14401:2004 Rigid plastics containers - Methods to test the effectiveness of closures Trim. I 55.120

662 EN 14406:2004Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution

Trim. I 91.080.40

663 EN 14411:2016Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking

SM EN 14411:2014 Trim. I 03.100.440 35.240.500

664 EN 14428:2015 Shower enclosures - Functional requirements and test methods SM SR EN 14428+A1:2010 Trim. I 91.140.70

665 CEN/TS 14441:2005 Postal services - Mail aggregates - Creation, processing and tracking Trim. I 03.240

666 CEN/TS 14442:2003 Postal services - Automated processing of mail items - Facing identification marks Trim. I 03.240

667 EN 14467:2004 Recreational diving services - Requirements for recreational scuba diving service providers Trim. I 03.080.30 03.200.99

668 EN 14477:2004 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods Trim. I 55.040

669 EN 14479:2004Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography-Absolute method

Trim. I 55.040

670 EN 14481:2003Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact

Trim. I 67.250 83.080.01

671 EN 14484:2003Health informatics - International transfer of personal health data covered by the EU data protection directive - High level security policy

Trim. I 35.240.80

Pagina 35 din 170





672 EN 14498:2004Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles

Trim. I 91.080.40

673 EN 14511-4:2013Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Operating requirements, marking and instructions

Trim. I 27.080 91.140.30

674 EN 14516:2015 Baths for domestic purposes SM SR EN 14516+A1:2013 Trim. I 91.140.70

675 CR 14539:2002Straight ammonium nitrate fertilizers - Comparative study on the determination of porosity (oil retention)

Trim. I 65.080

676 CEN/TS 14567:2004 Postal services - Automated processing of mail items - Address block locator Trim. I 03.240

677 EN 14571:2005Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method

Trim. I 17.040.20 25.220.40

678 CEN/TS 14577:2003Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons

Trim. I 67.250 83.040.30

679 CR 1460:1994 Packaging - Energy recovery from used packaging Trim. I 55.040

680 EN 14602:2012 Footwear - Test methods for the assessment of ecological criteria Trim. I 61.060

681 EN 14603:2004Information technology - Alphanumeric glyph image set for optical character recognition OCR-B - Shapes and dimensions of the printed image

Trim. I 35.040.50

682 EN 14609:2004 Windows - Determination of the resistance to static torsion Trim. I 91.060.50

683 EN 14615:2005 Postal services - Digital postage marks - Applications, security and design Trim. I 03.240

684 CEN/TS 14631:2005Postal services - Automatic identification of receptacles and containers - Receptacle asset numbering

Trim. I 03.240

685 EN 14636-2:2009Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers

Trim. I 93.030

686 EN 14637:2007Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance

Trim. I 91.060.50 91.190

687 ISO 14644-1:2015Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness by particle concentration

GOST ISO 14644-1-2002 Trim. I 13.040.35

688 EN 14648:2007 Building hardware - Fittings for shutters - Requirements and test methods Trim. I 91.190

689 EN 14653-1:2005Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications

Trim. I 93.020

690 EN 14653-2:2005Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test

Trim. I 93.020

691EN ISO 14688-1:2002/A1:2013

Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description - Amendment 1 (ISO 14688-1:2002/Amd 1:2013)

Trim. I 93.020

692 ISO 14695:2003 Industrial fans -- Method of measurement of fan vibration GOST ISO 10816-1-97 Trim. I 23.120 17.160

693 CEN/TR 14699:2004 Office furniture - Terminology Trim. I 35.100.40

Pagina 36 din 170





694 EN 14705:2005Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers

Trim. I 27.060.30 27.200

695 EN 14707:2012Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation

Trim. I 91.100.60

696 CR 1472:1997 General guidance for the marking of gas appliances Trim. I 27.060.20

697 CEN/TS 14754-1:2007Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds

Trim. I 91.080.40

698 CEN/TS 14758-2:2016Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 2: Guidance for the assessment of conformity

Trim. I 03.100.442 35.240.502

699 EN 14768:2005Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l

Trim. I 55.140

700 CEN/TS 14773:2004Postal services - Quality of service - Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters

Trim. I 03.240

701 EN 14787:2005Fertilizers and liming materials - Determination of water content - Guidelines and recommendations

Trim. I 65.080

702 EN 14802:2005Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading

Trim. I 93.025 93.030

703 EN 14804:2005 Language study tour providers - Requirements Trim. I 03.180 03.200.01

704 EN 14822-1:2005 Health informatics - General purpose information components - Part 1: Overview Trim. I 35.240.80

705 EN 14822-2:2005 Health informatics - General purpose information components - Part 2: Non-clinical Trim. I 35.240.80

706 EN 14822-3:2005 Health informatics - General purpose information components - Part 3: Clinical Trim. I 35.240.80

707 CEN/TS 14822-4:2005 Health informatics - General purpose information components - Part 4: Message headers Trim. I 35.240.80

708 EN ISO 14825:2011 Intelligent transport systems - Geographic Data Files (GDF) - GDF5.0 (ISO 14825:2011) Trim. I 03.220.01 35.240.60

709 CEN/TS 14826:2004Postal services - Automatic identification of items - Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks

Trim. I 03.240 35.040.50 35.240.69

710 EN 14830:2006 Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance Trim. I 93.025 93.030

711 ISO 14839-3:2006Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 3: Evaluation of stability margin

GOST 31186-2002 (ISO 10814:1996)

Trim. I 17.160

712 EN 14848:2005/AC:2007 Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups Trim. I 55.130

713 CEN/TR 14862:2004Precast concrete products - Full-scale testing requirements in standards on precast concrete products

Trim. I 91.100.30

714 EN 14867:2005 Packaging - Plastic freezer bags - Specifications and test methods Trim. I 55.080

Pagina 37 din 170





715 EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements Trim. I 91.140.60

716 EN 14873-1:2005Furniture removal activities - Storage of furniture and personal effects for private individuals - Part 1: Specification for the storage facility and related storage provision

Trim. I 03.080.30

717 EN 14873-2:2005Furniture removal activities - Storage of furniture and personal effects for private individuals - Part 2: Provision of the service

Trim. I 03.080.30

718 EN 1488:2000 Building valves - Expansion groups - Tests and requirements Trim. I 91.140.60

719 EN 14887:2005 Glass packaging - Cork removal devices - General requirements Trim. I 55.100 97.180

720 EN 14888:2005 Fertilizers and liming materials - Determination of cadmium content Trim. I 65.080

721 EN 1489:2000 Building valves - Pressure safety valves - Tests and requirements Trim. I 91.140.60

722 EN 14892:2005 Transport service - City logistics - Guideline for the definition of limited access to city centers Trim. I 03.100.10 03.220.20

723 EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements Trim. I 91.140.60

724CEN ISO/TS 14907-2:2016

Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface (ISO/TS 14907-2:2016)

Trim. I 03.100.540 35.240.600

725 EN 1491:2000 Building valves - Expansion valves - Tests and requirements Trim. I 91.140.60

726 CEN/TR 14920:2005 Jetting resistance of drain and sewer pipes - Moving jet test method Trim. I 93.030

727 CWA 14923-1:2004J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 1: Base Architecture - Programmer's Reference

Trim. I 35.240.40

728 CWA 14923-10:2004J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 10: Check Reader/Scanner Device Class Interface - Programmer's Reference

Trim. I 35.240.40

729 CWA 14923-11:2004J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 11: Camera Specification - Programmer's Reference

Trim. I 35.240.40

730 CWA 14923-12:2004J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 12: Vendor Dependant Mode Specification - Programmer's Reference

Trim. I 35.240.40

731 CWA 14923-2:2004J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 2: Pin Keypad Device Class Interface - Programmer's Reference

Trim. I 35.240.40

732 CWA 14923-3:2004J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 3: Magnetic Stripe & Chip Card Device Class Interface - Programmer's Reference

Trim. I 35.240.40

733 CWA 14923-4:2004J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 4: Text Input/Output Device Interface - Programmer's Reference

Trim. I 35.240.40

734 CWA 14923-5:2004J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 5: Cash Dispenser, Recycler and ATM Device Class Interface - Programmer's Reference

Trim. I 35.240.40

735 CWA 14923-6:2004J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 6: Printer Device Class Interface - Programmer's Reference

Trim. I 35.240.40

736 CWA 14923-7:2004J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 7: Alarm Device Interface - Programmer's Reference

Trim. I 35.240.40

Pagina 38 din 170





737 CWA 14923-8:2004J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 8: Sensors and Indicators Unit Device Class Interface - Programmer's Reference

Trim. I 35.240.40

738 CWA 14923-9:2004J/eXtensions for Financial Sevices (J/XFS) for the Java Platform - Part 9: Depository Device Class Interface - Programmer's Reference

Trim. I 35.240.40

739 EN 14975:2006+A1:2010 Loft ladders - Requirements, marking and testing Trim. I 91.060.30

740 EN 14979:2006 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13 Trim. I 55.120

741 EN 14982:2006+A1:2010Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness

Trim. I 93.030

742 CEN/TS 14993:2005Swap bodies for combined transport - Stackable swap bodies type A 1371 - Dimensions, design requirements and testing

Trim. I 55.180.10

743 EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture Trim. I 55.130

744 EN 15007:2006 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans Trim. I 55.130

745 EN 15008:2006Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture

Trim. I 55.130

746 EN 15009:2006 Aerosol containers - Compartmented aerosol containers Trim. I 55.130

747 EN 15010:2006Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch

Trim. I 55.130

748 EN 15042-1:2006Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves

Trim. I 17.040.20

749 EN 15042-2:2006Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method

Trim. I 17.040.20

750 EN 15048-1:2016 Non-preloaded structural bolting assemblies - Part 1: General requirements SM SR EN 15048-1:2010 Trim. I 03.100.445 35.240.505

751 CEN/TS 15084:2006 Liming materials - Guide to the determination of the lime requirement Trim. I 65.080

752 CEN/TS 15087:2005Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing - Test method for mechanical fasteners

Trim. I 91.060.20 91.100.30

753 EN 15091:2013 Sanitary tapware - Electronic opening and closing sanitary tapware Trim. I 91.140.70

754 EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements Trim. I 91.140.60

755 EN 15096:2008Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification

Trim. I 91.140.60

756 EN 15097:2006 Irrigation techniques - Localised irrigation - Hydraulic evaluation Trim. I 65.060.35

Pagina 39 din 170





757 EN 15099-1:2007Irrigation techniques - Remote monitoring and control for irrigation systems - Part 1: General considerations

Trim. I 65.060.35

758 EN 15101-1:2013Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation

Trim. I 91.100.60

759 EN 15101-2:2013Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 2: Specification for the installed products

Trim. I 91.100.60

760 CEN/TR 15106:2005Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001

Trim. I 65.080

761 CEN/TR 15118:2005 Testing guidelines for touch and close fasteners Trim. I 61.040

762 CEN/TS 15121-1:2011Postal Services - Hybrid Mail - Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations

Trim. I 03.240

763 CEN/TS 15121-2:2011Postal Services - Hybrid Mail - Part 2: Secured electronic postal services (SePS) interface specification - EPCM Service

Trim. I 03.240

764 CEN/TR 15124:2005 Design, preparation and application of internal gypsum plastering systems Trim. I 91.100.10 91.180

765 CEN/TR 15125:2005 Design, preparation and application of internal cement and/or lime plastering systems Trim. I 91.100.10 91.180

766 CEN/TS 15130:2006 Postal services - DPM infrastructure - Messages supporting DPM applications Trim. I 03.240

767 CEN/TR 15134:2005Non-destructive testing - Automated ultrasonic examination - Selection and application of systems

Trim. I 19.100

768 EN 15136:2006Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of BADGE, BFDGE and their hydroxy and chlorinated derivatives in food simulants

Trim. I 67.250

769 EN 15137:2006Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of NOGE and its hydroxy and chlorinated derivatives

Trim. I 67.250 71.040.40

770 EN 15140:2006Public passenger transport - Basic requirements and recommendations for systems that measure delivered service quality

Trim. I 03.220.01

771 EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation Trim. I 91.060.30 97.220.10

772 EN 15161:2006 Water conditioning equipment inside buildings - Installation, operation, maintenance and repair Trim. I 91.140.60

773 EN 15165:2014 Food processing machinery - Forming machines - Safety and hygiene requirements Trim. I 67.260

774 EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors Trim. I 19.100

775 EN 15180:2014 Food processing machinery - Food depositors - Safety and hygiene requirements Trim. I 67.260

776 EN 1521:1996 Determination of flexural strength of lightweight aggregate concrete with open structure Trim. I 91.100.30

777 EN 15213-2:2013Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 2: Common status message elements

Trim. I 35.240.60

Pagina 40 din 170





778 EN 15213-3:2013Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 3: Interface and system requirements in terms of short range communication system

Trim. I 35.240.60

779 EN 15213-4:2013Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 4: Interface and system requirements in terms of long range communication system

Trim. I 35.240.60

780 EN 15213-5:2013Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 5: Messaging interface

Trim. I 35.240.60

781 CEN/TS 15213-6:2011Road transport and traffic telematics - After-theft services for the recovery of stolen vehicles - Part 6: Test procedures

Trim. I 35.240.60

782 ISO 15218:2003 Pneumatic fluid power -- 3/2 solenoid valves -- Mounting interface surfaces SM GOST ISO 15218:2009 Trim. I 23.100.50

783 EN 15219:2006+A1:2007Water conditioning equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing

Trim. I 91.140.60

784 CEN/TR 15225:2005Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars

Trim. I 03.120.20 91.100.10

785 CEN/TR 15226:2006 Building products - Treatment of acoustics in product technical specifications Trim. I 03.120.10 11.020

786 CEN/TR 15232-2:2016Energy performance of buildings - Part 2: Accompanying TR prEN 15232-1:2015 - Modules M10-4,5,6,7,8,9,10

Trim. I 03.100.292 35.240.352

787 EN 15238:2006Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm

Trim. I 65.080

788 EN 15238:2006/AC:2009Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm

Trim. I 65.080

789 EN 15241:2007/AC:2011Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in buildings

Trim. I 91.140.30

790 CEN/TR 15253:2005 Health informatics - Quality of service requirements for health information interchange Trim. I 35.240.80

791 CEN/TS 15260:2006 Health informatics - Classification of safety risks from health informatics products Trim. I 35.240.80

792 EN 15284:2007Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware

Trim. I 67.250

793 EN 1529:1999 Doors leaves - Height, width, thickness and squareness - Tolerance classes Trim. I 91.060.50

794 CEN/TR 15299:2006 Health informatics - Safety procedures for identification of patients and related objects Trim. I 35.240.80

795 CEN/TR 15300:2006 Health informatics - Framework for formal modelling of healthcare security policies Trim. I 35.240.80

796 EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction Trim. I 19.100

Pagina 41 din 170





797 EN 15305:2008/AC:2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction Trim. I 19.100

798 EN 15317:2013Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment

Trim. I 19.100

799 EN 15323:2007Bitumen and bituminous binders - Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT)

Trim. I 91.100.50

800 EN 15331:2011 Criteria for design, management and control of maintenance services for buildings Trim. I 03.080.10 91.040.01

801 EN 15332:2007 Heating boilers - Energy assessment of hot water storage systems Trim. I 91.140.65

802 EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles SM EN 1536:2014 Trim. I 93.020

803 EN 15360:2007Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC)

Trim. I 65.080

804 CEN/TR 15367-1:2014 Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels Trim. I 03.100.50 75.160.20 75.200

805 CEN/TR 15367-2:2007 Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels Trim. I 03.100.50 75.160.20 75.200

806 CEN/TR 15367-3:2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination Trim. I 03.100.50 75.160.20 75.200

807 EN 15383:2012+A1:2013Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers

Trim. I 93.030

808 EN 15384:2007Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating

Trim. I 55.120

809 EN 15385:2007Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding

Trim. I 55.120

810 EN 15386:2007 Packaging - Flexible laminate and plastic tubes - Test method to determine the print adhesion Trim. I 55.120

811 EN 15387:2011 Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam Trim. I 55.120

812 EN 15389:2008Industrial valves - Performance characteristics of thermoplastic valves when used as construction products

Trim. I 91.140.70

813 CEN/TS 15399:2007 Gas Supply Systems - Guidelines for Management systems for Gas Distribution Network Trim. I 03.100.70 91.140.40

814 ISO 15407-1:2000Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector

SM GOST ISO 15407-1:2008 Trim. I 23.100.50

815 ISO 15407-2:2003Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector

SM GOST ISO 15407-2:2008 Trim. I 23.100.50

816 ISO/IEC 15416:2016Automatic identification and data capture techniques -- Bar code print quality test specification -- Linear symbols

SM GOST R 51294.7:2003 (ISO/CEI 15416-2000)

Trim. I 35.040.50 01.080.50

Pagina 42 din 170





817 ISO/IEC 15418:2016Information technology -- Automatic identification and data capture techniques -- GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance

GOST 30833-2002 (ISO/CEI 15418-99)

Trim. I 35.040.50

818 ISO/IEC 15420:2009Information technology -- Automatic identification and data capture techniques -- EAN/UPC bar code symbology specification

SM GOST ISO/CEI 15420:2010

Trim. I 35.040.50 01.080.50

819 EN 15421:2007Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering

Trim. I 55.120

820 ISO/IEC 15421:2010Information technology -- Automatic identification and data capture techniques -- Bar code master test specifications

GOST 31245-2004 (ISO/CEI 15421:2000)

Trim. I 35.040.50

821 EN 15428:2007 Soil improvers and growing media - Determination of particle size distribution Trim. I 65.080

822 EN 10027-1:2016 Designation systems for steels - Part 1: Steel names SM EN 10027-1:2015 Trim. II 03.100.192 35.240.252

823 EN ISO 10938:2016Ophthalmic optics - Chart displays for visual acuity measurement - Printed, projected and electronic (ISO 10938:2016)

SM EN ISO 10938:2016 Trim. II 03.100.193 35.240.253

824 EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) SM SR EN ISO 11357-1:2013 Trim. II 03.100.197 35.240.257

825 EN ISO 11381:2016 Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016) SM EN ISO 11381:2016 Trim. II 03.100.198 35.240.258

826 EN ISO 11427:2016Jewellery - Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:2014)

SM SR ISO 11427:2012 Trim. II 03.100.200 35.240.260

827 EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products (ISO 11469:2016) SM SR EN ISO 11469:2013 Trim. II 03.100.201 35.240.261

828 EN ISO 11494:2016Jewellery - Determination of platinum in platinum jewellery alloys - ICPOES method using yttrium as internal standard element (ISO 11494:2014)

Trim. II 03.100.203 35.240.263

829 EN ISO 11495:2016Jewellery - Determination of palladium in palladium jewellery alloys - ICP-OES method using yttrium as internal standard element (ISO 11495:2014)

Trim. II 03.100.204 35.240.264

830 EN ISO 12006-3:2016Building construction - Organization of information about construction works - Part 3: Framework for object-oriented information (ISO 12006-3:2007)

Trim. II 03.100.205 35.240.265

831 EN 12945:2014+A1:2016 Liming materials - Determination of neutralizing value - Titrimetric methods SM EN 12945:2015 Trim. II 03.100.206 35.240.266

832 EN 13203-4:2016Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity

Trim. II 03.100.207 35.240.267

833EN 13451-1:2011+A1:2016

Swimming pool equipment - Part 1: General safety requirements and test methods Trim. II 03.100.218 35.240.278

834 EN ISO 14224:2016Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment (ISO 14224:2016)

SM EN ISO 14224:2016 Trim. II 03.100.219 35.240.279

835 EN ISO 14644-14:2016Cleanrooms and associated controlled environments - Part 14: Assessment of suitability for use of equipment by airborne particle concentration (ISO 14644-14:2016)

Trim. II 03.100.220 35.240.280

836EN 15153-1:2013+A1:2016

Railway applications - External visible and audible warning devices for trains - Part 1: Head, marker and tail lamps

Trim. II 03.100.221 35.240.281

Pagina 43 din 170





837EN 15269-5:2014+A1:2016

Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows

SM EN 15269-5:2015 Trim. II 03.100.222 35.240.282

838 EN 15308:2016Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection

Trim. II 03.100.223 35.240.283

839 EN ISO 15614-7:2016Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016)

SM SR EN ISO 15614-7:2011 Trim. II 03.100.224 35.240.284

840 EN 15876-1:2016Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes

Trim. II 03.100.225 35.240.285

841 EN 15876-2:2016Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite

Trim. II 03.100.226 35.240.286

842 EN 16170:2016Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)

Trim. II 03.100.227 35.240.287

843 EN 16171:2016Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)

Trim. II 03.100.228 35.240.288

844 EN 16175-1:2016Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS)

Trim. II 03.100.229 35.240.289

845 EN 16175-2:2016Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)

Trim. II 03.100.230 35.240.290

846 EN 16382:2016Thermal insulation products for building applications - Determination of the pull-through resistance of plate anchors through thermal insulation products

Trim. II 03.100.231 35.240.291

847 EN 16383:2016Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)

Trim. II 03.100.232 35.240.292

848 EN 16602-70:2016 Space product assurance - Materials, mechanical parts and processes Trim. II 03.100.310 35.240.370

849 EN 16602-70-12:2016 Space product assurance - Design rules for printed circuit boards Trim. II 03.100.311 35.240.371

850 EN ISO 16739:2016Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries (ISO 16739:2013)

Trim. II 03.100.235 35.240.295

851 EN 16803-1:2016Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 1: Definitions and system engineering procedures for the establishment and assessment of performances

Trim. II 03.100.312 35.240.372

852 EN 16807:2016Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants

Trim. II 03.100.237 35.240.297

853 EN 16849:2016Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance

Trim. II 03.100.238 35.240.298

854 EN 16865:2016 Inland navigation vessels - Connections and assembled hoses for the transfer of potable water Trim. II 03.100.239 35.240.299

Pagina 44 din 170





855 EN 16872:2016Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy

Trim. II 03.100.240 35.240.300

856 EN 16942:2016 Fuels - Identification of vehicle compatibility - Graphical expression for consumer information Trim. II 03.100.241 35.240.301

857 EN ISO 17509:2016 Dentistry - Torque transmitter for handpieces (ISO 17509:2016) Trim. II 03.100.247 35.240.307

858 EN 1914:2016 Inland navigation vessels - Work boats, ship’s boats and lifeboats Trim. II 03.100.344 35.240.404

859 EN ISO 20088-1:2016Determination of the resistance to cryogenic spillage of insulation materials - Part 1: Liquid phases (ISO 20088-1:2016)

Trim. II 03.100.248 35.240.308

860 EN ISO 21028-1:2016Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)

Trim. II 03.100.249 35.240.309

861 EN ISO 22477-10:2016Geotechnical investigation and testing - Testing of geotechnical structures - Part 10: Testing of piles: rapid load testing (ISO 22477-10:2016)

Trim. II 03.100.250 35.240.310

862 EN ISO 2286-1:2016Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:2016)


863 EN ISO 2286-2:2016Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)


864 EN ISO 2286-3:2016Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:2016)


865 EN ISO 22975-1:2016Solar energy - Collector components and materials - Part 1: Evacuated tubes - Durability and performance (ISO 22975-1:2016)

Trim. II 03.100.251 35.240.311

866 EN ISO 22975-2:2016Solar energy - Collector components and materials - Part 2: Heat-pipes for solar thermal application - Durability and performance (ISO 22975-2:2016)

Trim. II 03.100.252 35.240.312

867 EN ISO 23537-1:2016Requirements for sleeping bags - Part 1: Thermal and dimensional requirements (ISO 23537-1:2016)

Trim. II 03.100.253 35.240.313

868 EN ISO 23537-2:2016 Requirements for sleeping bags - Part 2: Fabric and material properties (ISO 23537-2:2016) Trim. II 03.100.254 35.240.314

869 EN ISO 29481-2:2016-Building information models - Information delivery manual - Part 2: Interaction framework (ISO 29481-2:2012)

Trim. II 03.100.255 35.240.315

870 EN ISO 3677:2016 Filler metal for soldering and brazing - Designation (ISO 3677:2016) SM SR EN ISO 3677:2012 Trim. II 03.100.348 35.240.408

871 EN ISO 3924:2016Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2016)

SM EN ISO 3924:2016 Trim. II 03.100.349 35.240.409

872 EN 413-2:2016 Masonry cement - Part 2: Test methods SM SR EN 413-2:2011 Trim. II 03.100.342 35.240.402

873 EN ISO 5366:2016 Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016) SM EN ISO 5366-1:2015 Trim. II 03.100.350 35.240.410

874 EN 599-2:2016Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 2: Labelling

SM SR EN 599-2:2012 Trim. II 03.100.343 35.240.403

875 EN ISO 6385:2016 Ergonomics principles in the design of work systems (ISO 6385:2016) SM EN ISO 6385:2016 Trim. II 03.100.184 35.240.244

Pagina 45 din 170





876 EN ISO 7153-1:2016 Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) SM SR EN ISO 7153-1:2012 Trim. II 03.100.186 35.240.246

877 EN ISO 7233:2016Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016)

SM EN ISO 7233:2015 Trim. II 03.100.187 35.240.247

878 EN ISO 7326:2016Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016)

SM EN ISO 7326:2015 Trim. II 03.100.188 35.240.248

879 EN ISO 8536-13:2016Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016)

Trim. II 03.100.189 35.240.249

880 EN ISO 9202:2016 Jewellery - Fineness of precious metal alloys (ISO 9202:2014) Trim. II 03.100.190 35.240.250

881 EN ISO 9856:2016Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016)

SM EN ISO 9856:2015 SM EN ISO 9856:2015/A1:2015

Trim. II 03.100.191 35.240.251

882 EN ISO 16440:2016Petroleum and natural gas industries - Pipeline transportation systems - Design, construction and maintenance of steel cased pipelines (ISO 16440:2016)

Trim. II 03.100.76 35.240.136

883 EN 61300-2-37:2016Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures

Trim. II 03.100.494 35.240.554

884 EN 10205:2016 Cold reduced tinmill products - Blackplate SM EN 10205:2015 Trim. II 03.100.90 35.240.150

885 EN ISO 10253:2016Water quality - Marine algal growth inhibition test with Skeletonema sp. and Phaeodactylum tricornutum (ISO 10253:2016)

SM SR EN ISO 10253:2012 Trim. II 03.100.91 35.240.151

886 EN ISO 10326-1:2016Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016)

Trim. II 03.100.92 35.240.152

887 EN ISO 10360-12:2016Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)

Trim. II 03.100.93 35.240.153

888 EN ISO 1043-3:2016 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016) SM SR EN ISO 1043-3:2013 Trim. II 03.100.124 35.240.184

889 EN 12178:2016Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking

SM SR EN 12178:2011 Trim. II 03.100.94 35.240.154

890 EN 12642:2016Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements

SM EN 12642:2015 Trim. II 03.100.95 35.240.155

891 EN 12727:2016 Furniture - Ranked seating - Requirements for safety, strength and durability SM EN 12727:2015 Trim. II 03.100.96 35.240.156

892 EN 13075-1:2016Bitumen and bituminous binders - Determination of breaking behavior - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method

Trim. II 03.100.97 35.240.157

893 EN 13075-2:2016Bitumen and bituminous binders - Determination of breaking behavior - Part 2: Determination of fines mixing time of cationic bituminous emulsions

Trim. II 03.100.98 35.240.158

894 EN 13215:2016Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data

Trim. II 03.100.100 35.240.160

895EN 13445-2:2014/A1:2016

Unfired pressure vessels - Part 2: Materials Trim. II 03.100.101 35.240.161

Pagina 46 din 170





896EN 13480-4:2012/A3:2016

Metallic industrial piping - Part 4: Fabrication and installation Trim. II 03.100.102 35.240.162

897 EN 13587:2016Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method

SM EN 13587:2016 Trim. II 03.100.103 35.240.163

898 EN 13771-1:2016Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors

Trim. II 03.100.104 35.240.164

899 EN ISO 1401:2016 Rubber hoses for agricultural spraying (ISO 1401:2016) SM EN ISO 1401:2016 Trim. II 03.100.125 35.240.185

900 EN 1412:2016 Copper and copper alloys - European numbering system SM EN 1412:2015 Trim. II 03.100.126 35.240.186

901 EN 14198:2016Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives

SM EN 14198:2015 Trim. II 03.100.105 35.240.165

902 EN ISO 14577-4:2016Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)

SM EN ISO 14577-4:2016 Trim. II 03.100.106 35.240.166

903 EN ISO 14801:2016 Dentistry - Implants - Dynamic loading test for endosseous dental implants (ISO 14801:2016) SM EN ISO 14801:2014 Trim. II 03.100.107 35.240.167

904 EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) SM EN ISO 148-1:2014 Trim. II 03.100.169 35.240.229

905 EN ISO 148-2:2016Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)

SM EN ISO 148-2:2016 Trim. II 03.100.109 35.240.169

906 EN ISO 148-3:2016Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016)

SM EN ISO 148-3:2016 Trim. II 03.100.110 35.240.170

907EN 15051-2:2013+A1:2016

Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method

Trim. II 03.100.108 35.240.168

908 EN ISO 15223-1:2016Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO 15223-1:2016)

SM EN ISO 15223-1:2014 Trim. II 03.100.256 35.240.316

909 EN ISO 15236-1:2016Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016)


910EN 15273-1:2013+A1:2016

Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock

SM EN 15273-1:2016 Trim. II 03.100.64 35.240.124

911EN 15273-2:2013+A1:2016

Railway applications - Gauges - Part 2: Rolling stock gauge Trim. II 03.100.65 35.240.125

912EN 15273-3:2013+A1:2016

Railway applications - Gauges - Part 3: Structure gauges Trim. II 03.100.66 35.240.126

913 EN 15372:2016 Furniture - Strength, durability and safety - Requirements for nondomestic tables SM EN 15372:2015 Trim. II 03.100.67 35.240.127

914 EN ISO 15512:2016 Plastics - Determination of water content (ISO 15512:2016) SM EN ISO 15512:2016 Trim. II 03.100.68 35.240.128

915 EN 1570-2:2016Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s

Trim. II 03.100.127 35.240.187

916 EN 16230-2:2016 Leisure karts - Part 2: Safety requirements for karting facilities Trim. II 03.100.70 35.240.130

Pagina 47 din 170





917 EN 16241:2014+A1:2016 Railway applications - Slack adjuster Trim. II 03.100.71 35.240.131

918 EN 16282-2:2016Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements

Trim. II 03.100.72 35.240.132

919 EN 16282-3:2016Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; design and safety requirements

Trim. II 03.100.73 35.240.133

920 EN 16282-4:2016Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; design and safety requirements

Trim. II 03.100.74 35.240.134

921 EN ISO 16409:2016 Dentistry - Oral care products - Manual interdental brushes (ISO 16409:2016)SM EN ISO 16409:2016 SM EN ISO 16409:2016/A1:2016

Trim. II 03.100.75 35.240.135

922 EN ISO 16610-31:2016Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)

Trim. II 03.100.77 35.240.137

923 EN 16704-2-1:2016Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS)

Trim. II 03.100.79 35.240.139

924 EN 16704-2-2:2016Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers

Trim. II 03.100.80 35.240.140

925 EN 16704-3:2016Railway applications - Track - Safety protection on the track during work - Part 3: Competences for personnel related to work on or near tracks

Trim. II 03.100.81 35.240.141

926 EN 16723-1:2016Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 1: Specifications for biomethane for injection in the natural gas network

Trim. II 03.100.82 35.240.142

927 EN 16725:2016 Railway applications - Track - Restoration and repair of manganese crossings Trim. II 03.100.83 35.240.143

928 EN 16771:2016 Railway applications - Infrastructure - Aluminothermic welding of grooved rails Trim. II 03.100.84 35.240.144

929 EN 16796-1:2016 Energy efficiency of Industrial trucks - Test methods - Part 1: General Trim. II 03.100.85 35.240.145

930 EN 16796-2:2016Energy efficiency of Industrial trucks - Test methods - Part 2: Operator controlled self-propelled trucks, towing tractors and burden-carrier trucks

Trim. II 03.100.86 35.240.146

931 EN 16796-3:2016 Energy efficiency of Industrial trucks - Test methods - Part 3: Container handling lift trucks Trim. II 03.100.87 35.240.147

932 EN 16813:2016Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method

Trim. II 03.100.31 35.240.91

933 EN 16836-1:2016Communication systems for meters - Wireless mesh networking for meter data exchange - Part 1: Introduction and standardization framework

Trim. II 03.100.32 35.240.92

934 EN 16836-2:2016Communication systems for meters - Wireless mesh networking for meter data exchange - Part 2: Networking layer and stack specification

Trim. II 03.100.33 35.240.93

935 EN 16836-3:2016Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3: Energy profile specification dedicated application layer

Trim. II 03.100.34 35.240.94

936 EN 16841-1:2016Ambient air - Determination of odour in ambient air by using field inspection - Part 1: Grid method

Trim. II 03.100.35 35.240.95

Pagina 48 din 170





937 EN 16841-2:2016Ambient air - Determination of odour in ambient air by using field inspection - Part 2: Plume method

Trim. II 03.100.36 35.240.96

938 EN 16848:2016Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet

Trim. II 03.100.37 35.240.97

939 EN ISO 16852:2016 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016) SM EN ISO 16852:2016 Trim. II 03.100.38 35.240.98

940 EN 16873:2016Conservation of cultural heritage - Guidelines for the management of waterlogged wood on archaeological terrestrial sites

Trim. II 03.100.39 35.240.99

941 EN 16877:2016Animal feeding stuffs: Methods of sampling and analysis – Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LC-MS

Trim. II 03.100.40 35.240.100

942 EN 16882:2016Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures

Trim. II 03.100.41 35.240.101

943 EN 16896:2016Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter

Trim. II 03.100.43 35.240.103

944 EN 16899:2016Sports and recreational equipment - Parkour equipment - Safety requirements and test methods

Trim. II 03.100.44 35.240.104

945 EN 16983:2016 Disc springs - Quality specifications - Dimensions Trim. II 03.100.46 35.240.106

946 EN 16984:2016 Disc springs - Calculation Trim. II 03.100.47 35.240.107

947 EN ISO 17268:2016 Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2012) Trim. II 03.100.51 35.240.111

948 EN ISO 17638:2016 Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) SM SR EN ISO 17638:2012 Trim. II 03.100.52 35.240.112

949 EN ISO 17892-4:2016Geotechnical investigation and testing - Laboratory testing of soil – Part 4: Determination of particle size distribution (ISO 17892-4:2016)

Trim. II 03.100.53 35.240.113

950 EN ISO 18391:2016 Geometrical product specifications (GPS) - Population specification (ISO 18391:2016) Trim. II 03.100.54 35.240.114

951 EN ISO 18674-2:2016Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO 18674-2:2016)

Trim. II 03.100.55 35.240.115

952 EN ISO 19598:2016Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016)

Trim. II 03.100.56 35.240.116

953 EN 196-3:2016 Methods of testing cement - Part 3: Determination of setting times and soundness SM SR EN 196-3+A1:2011 Trim. II 03.100.111 35.240.171

954EN ISO 20471:2013/A1:2016

High visibility clothing - Test methods and requirements - Amendment 1 (ISO 20471: 2013 /Amd 1:2016)

Trim. II 03.100.57 35.240.117

955 EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity SM EN 206:2016 Trim. II 03.100.112 35.240.172

956 EN ISO 20957-9:2016Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)

Trim. II 03.100.58 35.240.118

957 EN 233:2016Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings

SM SR EN 233:2014 Trim. II 03.100.113 35.240.173

Pagina 49 din 170





958 EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) SM EN ISO 2398:2016 Trim. II 03.100.128 35.240.188

959 EN ISO 24431:2016Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016)

Trim. II 03.100.60 35.240.120

960 EN ISO 374-1:2016Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)

Trim. II 03.100.114 35.240.174

961 EN ISO 374-5:2016Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)

Trim. II 03.100.115 35.240.175

962 EN 378-1:2016Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria

SM EN 378-1+A2:2014 Trim. II 03.100.116 35.240.176

963 EN 378-2:2016Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

SM SR EN 378-2+A2:2014 Trim. II 03.100.117 35.240.177

964 EN 378-3:2016Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection

SM EN 378-4+A1:2014 Trim. II 03.100.118 35.240.178

965 EN 378-4:2016Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery

SM EN 378-4+A1:2014 Trim. II 03.100.119 35.240.179

966 EN 388:2016 Protective gloves against mechanical risks SM SR EN 388:2010 Trim. II 03.100.120 35.240.180

967 EN ISO 3928:2016 Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:2016) SM EN ISO 3928:2015 Trim. II 03.100.130 35.240.190

968 EN ISO 3964:2016 Dentistry - Coupling dimensions for handpiece connectors (ISO 3964:2016) Trim. II 03.100.131 35.240.191

969 EN 4165-013:2016Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard

Trim. II 03.100.132 35.240.192

970 EN ISO 4230:2016Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)

Trim. II 03.100.133 35.240.193

971 EN ISO 4231:2016Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)

Trim. II 03.100.134 35.240.194

972 EN ISO 4674-1:2016Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016)

SM EN ISO 4674-1:2015 Trim. II 03.100.135 35.240.195

973 EN 4701-002:2016Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 002: Specification of performance

SM EN 4701-002:2016 Trim. II 03.100.136 35.240.196

974 EN ISO 5832-3:2016Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016)

SM EN ISO 5832-3:2016 Trim. II 03.100.137 35.240.197

975EN ISO 7010:2012/A6:2016

Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 6 (ISO 7010:2011/Amd 6:2014)

Trim. II 03.100.138 35.240.198

976 EN 754-2:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties SM EN 754-2:2016 Trim. II 03.100.121 35.240.181

Pagina 50 din 170





977 EN ISO 7751:2016Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)

SM SR EN ISO 7751:2014 Trim. II 03.100.139 35.240.199

978 EN ISO 8331:2016Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016)

SM EN ISO 8331:2015 Trim. II 03.100.140 35.240.200

979 EN ISO 8871-5:2016Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 5: Functional requirements and testing (ISO 8871-5:2016)

SM EN ISO 8871-5:2016 Trim. II 03.100.141 35.240.201

980 EN ISO 9173-1:2016 Dentistry - Extraction forceps - Part 1: General requirements (ISO 9173-1:2016) SM EN ISO 9173-1:2016 Trim. II 03.100.88 35.240.148

981 EN ISO 9999:2016 Assistive products for persons with disability - Classification and terminology (ISO 9999:2016) SM EN ISO 9999:2016 Trim. II 03.100.89 35.240.149

982 EN 1543:1998Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers

Trim. II 91.080.40

983 EN 15430-1:2015Winter and road service area maintenance equipment - Data acquisition and transmission - Part 1: In-vehicle data acquisition

Trim. II 35.240.60 43.160

984 CEN/TS 15430-2:2012Winter and road service area maintenance equipment - Data acquisition and transmission - Part 2: Protocol for data transfer between information supplier and client application server

Trim. II 35.240.60 43.160

985 EN 15433-1:2007Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 1: General requirements

Trim. II 55.180.01

986 EN 15433-3:2007Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 3: Data validity check and data editing for evaluation

Trim. II 55.180.01

987 EN 15433-5:2007Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 5: Derivation of Test Specifications

Trim. II 55.180.01

988 CEN/TS 15448:2014Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems)

Trim. II 03.240 35.240.69

989 CEN/TR 15449-4:2013 Geographic information - Spatial Data Infrastructure - Part 4: Service centric view Trim. II 35.240.70

990 EN 15451:2008Fertilizers - Determination of chelating agents - Determination of iron chelated by EDDHSA by ion pair chromatography

Trim. II 65.080

991 EN 15452:2008Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p-EDDHA by reversed phase HPLC

Trim. II 65.080

992 EN 15456:2008Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements

Trim. II 91.140.10

993 ISO/IEC 15459-1:2014Information technology -- Automatic identification and data capture techniques -- Unique identification -- Part 1: Individual transport units

SM GOST ISO/CEI 15459-1:2008

Trim. II 35.040.50

994 ISO/IEC 15459-2:2015Information technology -- Automatic identification and data capture techniques -- Unique identification -- Part 2: Registration procedures

SM GOST ISO/CEI 15459-2:2008

Trim. II 35.040.50

995 EN 15467:2014Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements

Trim. II 67.260

996 EN 15475:2009 Fertilizers - Determination of ammoniacal nitrogen Trim. II 65.080

997 EN 15476:2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda Trim. II 65.080

998 EN 15477:2009 Fertilizers - Determination of the water-soluble potassium content Trim. II 65.080

Pagina 51 din 170





999 EN 15478:2009 Fertilizers - Determination of total nitrogen in urea Trim. II 65.080

1000 EN 15479:2009 Fertilizers - Spectrophotometric determination of biuret in urea Trim. II 65.080

1001 CEN/TR 15500-2:2016Energy Performance of Buildings - Control for heating, ventilating and air-conditioning applications — Part 2: Accompanying TR prEN 15500-1:2015 - Modules M3-5,M4-5,M5-5

Trim. II 03.100.542 35.240.602

1002 EN 15501:2015Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification

SM EN 15501:2015 Trim. II 91.100.60

1003 ISO 15501-2:2016 Road vehicles -- Compressed natural gas (CNG) fuel systems -- Part 2: Test methods GOST ISO 15501-2-2006 Trim. II 43.060.40

1004EN 15502-1:2012+A1:2015

Gas-fired heating boilers - Part 1: General requirements and tests SM EN 15502-1:2014 Trim. II 27.060.30 91.140.10

1005 EN 15502-2-2:2014 Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances Trim. II 27.060.30 91.140.10

1006 EN 15509:2014 Electronic fee collection - Interoperability application profile for DSRC Trim. II 35.240.60

1007 EN 15510:2007Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES

Trim. II 65.120

1008 CEN/TS 15511:2008 Postal services - Quality of service - Information available on postal services Trim. II 03.240

1009 EN 15519:2007Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract

Trim. II 55.040 67.250

1010 CEN/TS 15523:2011 Postal Services - Statement of mailing submission Trim. II 03.240

1011 CEN/TR 15524:2011Postal services - Customer-directed information including track and trace - General concepts and definitions

Trim. II 03.240

1012 EN 15531-1:2015Public transport - Service interface for real-time information relating to public transport operations - Part 1: Context and framework

Trim. II 35.240.60

1013 EN 15531-2:2015Public transport - Service interface for real-time information relating to public transport operations - Part 2: Communications

Trim. II 35.240.60

1014 EN 15531-3:2015Public transport - Service interface for real-time information relating to public transport operations - Part 3: Functional service interfaces

Trim. II 35.240.60

1015 CEN/TS 15531-4:2011Public transport - Service interface for real-time information relating to public transport operations - Part 4: Functional service interfaces: Facility Monitoring

Trim. II 35.240.60

1016 EN 15543:2008Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids

Trim. II 55.100

1017 EN 15543:2008/AC:2008Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids

Trim. II 55.100

1018 EN 15550:2007Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion

Trim. II 65.120

1019 EN 15552:2008Packaging - Complete, filled transport packages and unit loads - Performance testing schedules for common distribution chains

Trim. II 55.180.40

Pagina 52 din 170





1020 ISO 15552:2004Pneumatic fluid power -- Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm -- Basic, mounting and accessories dimensions

SM GOST ISO 15552:2009 Trim. II 23.100.20

1021 EN 15558:2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch Trim. II 65.080

1022 EN 15559:2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd Trim. II 65.080

1023 EN 15560:2009 Fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free Trim. II 65.080

1024 EN 15561:2009 Fertilizers - Determination of total nitrogen in calcium cyanamide containing nitrates Trim. II 65.080

1025 EN 15562:2009 Fertilizers - Determination of cyanamide nitrogen Trim. II 65.080

1026 EN 15564:2008 Precast concrete products - Resin bound concrete - Requirements and test methods Trim. II 91.100.30

1027 EN 15565:2008Tourism services - Requirements for the provision of professional tourist guide training and qualification programmes

Trim. II 03.100.30 03.200.01

1028 CWA 15579:2007 E-invoices and digital signatures Trim. II 35.240.30 35.240.63

1029 EN 15593:2008Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements

Trim. II 55.020 67.020

1030 EN 15604:2009Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen

Trim. II 65.080

1031 CEN/TR 15615:2008Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document

Trim. II 91.140.99

1032 EN 15621:2012Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES

Trim. II 65.120

1033 CEN/TR 15623:2008 Food processing machinery - Route map - Materials for food area Trim. II 67.260

1034 EN 15628:2014 Maintenance - Qualification of maintenance personnel Trim. II 03.080.10 03.100.30

1035 EN 15636:2010Sanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods

Trim. II 91.140.70

1036 CEN/TR 15640:2007 Health informatics - Measures for ensuring the patient safety of health software Trim. II 35.240.80

1037 EN 15643-1:2010Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework

Trim. II 91.040.01

1038 EN 15643-2:2011Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance

Trim. II 91.040.01

1039 EN 15643-3:2012Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance

Trim. II 91.040.01

1040 EN 15643-4:2012Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance

Trim. II 91.040.01

1041 EN 15644:2008 Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements Trim. II 91.060.30

1042 CEN/TR 15645-1:2008Paper and board intended to come into contact with foodstuffs - Calibration of the odour test - Part 1: Odour

Trim. II 67.250 85.060

Pagina 53 din 170





1043 CEN/TR 15645-2:2008Paper and board intended to come into contact with foodstuffs - Calibration of the off flavour test - Part 2: Fatty food

Trim. II 67.250 85.060

1044CEN/TR 15645-2:2008/AC:2008

Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 2: Fatty food

Trim. II 67.250 85.060

1045 CEN/TR 15645-3:2008Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food

Trim. II 67.250 85.060

1046CEN/TR 15645-3:2008/AC:2008

Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food

Trim. II 67.250 85.060

1047 EN 15653:2009Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia

Trim. II 55.120

1048 EN 15657-1:2009

Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example

Trim. II 91.120.20

1049 CEN/TR 15677:2008 Fly ash obtained from co-combustion - A report on the situation in Europe Trim. II 91.100.30

1050 CEN/TR 15678:2008Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes

Trim. II 91.100.30

1051 CEN/TS 15680:2007 Prefabricated timber stairs - Mechanical test methods Trim. II 91.060.30

1052 EN 15684:2012 Building hardware - Mechatronic cylinders - Requirements and test methods Trim. II 91.190

1053 EN 15688:2008Fertilizers - Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide (NBPT) using high-performance liquid chromatography (HPLC)

Trim. II 65.080

1054 EN 15694:2009+A1:2015 Agricultural and forestry tractors - Passenger seat - Requirements and test procedures SM EN 15694:2015 Trim. II 65.060.10

1055 EN 15696:2008 Self storage - Specification for self storage services Trim. II 03.080.30 55.220

1056 CEN/TR 15697:2008 Cement - Performance testing for sulfate resistance - State of the art report Trim. II 91.100.10

1057 ISO 157:1996 Coal -- Determination of forms of sulfurGOST 30404-2000 (ISO 157-96)

Trim. II 73.040

1058 EN 15701:2016Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods

Trim. II 03.100.69 35.240.129

1059 EN 15704:2008Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water

Trim. II 65.080

1060 EN 15705:2010Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B)

Trim. II 65.080

1061 EN 15715:2009Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products

Trim. II 91.100.60

1062 ISO 1572:1980 Tea -- Preparation of ground sample of known dry matter contentGOST 28550-90 (ISO 1572-80)

Trim. II

1063 EN 15722:2015 Intelligent transport systems - ESafety - ECall minimum set of data Trim. II 35.240.60

Pagina 54 din 170





1064 EN 15726:2011Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions

Trim. II 91.140.30

1065 CEN/TR 15735:2008 Postal services - Quality of service - Distance to access points Trim. II 03.240

1066 EN 15736:2009Timber Structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses

Trim. II 91.080.20

1067 CEN/TR 15739:2008 Precast concrete products - Concrete finishes - Identification Trim. II 91.100.30

1068 CWA 15748-29:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 29: XFS MIB Architecture and SNMP Extensions MIB Version 3.10

Trim. II 35.240.40


Trim. II 35.240.40

1070 CWA 15748-31:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 31: XFS MIB Device Specific Definitions - Identification Card Device Class MIB 3.10

Trim. II 35.240.40

1071 CWA 15748-32:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 32: XFS MIB Device Specific Definitions - Cash Dispenser Device Class MIB 3.10

Trim. II 35.240.40

1072 CWA 15748-33:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 33: XFS MIB Device Specific Definitions - PIN Keypad Device Class MIB 3.10

Trim. II 35.240.40

1073 CWA 15748-34:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 34: XFS MIB Device Specific Definitions - Check Reader/Scanner Device Class MIB 3.10

Trim. II 35.240.40

1074 CWA 15748-35:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 35: XFS MIB Device Specific Definitions - Depository Device Class MIB 3.10

Trim. II 35.240.40

1075 CWA 15748-36:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 36: XFS MIB Device Specific Definitions - Text Terminal Unit Device Class MIB 3.10

Trim. II 35.240.40

1076 CWA 15748-37:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 37: XFS MIB Device Specific Definitions - Sensors and Indicators Unit Device Class MIB 3.10

Trim. II 35.240.40

1077 CWA 15748-38:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 38: XFS MIB Device Specific Definitions - Camera Device Class MIB 3.10

Trim. II 35.240.40

1078 CWA 15748-39:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 39: XFS MIB Device Specific Definitions - Alarm Device Class MIB 3.10

Trim. II 35.240.40

1079 CWA 15748-41:2011Extensions for Financial Services (XFS) interface specification – Release 3.10 - Part 41: XFS MIB Device Specific Definitions - Cash In Module Device Class MIB 3.10

Trim. II 35.240.40

1080 CWA 15748-43:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 43: XFS MIB Device Specific Definitions - Vendor Dependent Mode Class MIB 3.10

Trim. II 35.240.40

1081 CWA 15748-44:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 44: XFS MIB Application Management MIB 3.10

Trim. II 35.240.40

Pagina 55 din 170





1082 CWA 15748-45:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 45: XFS MIB Device Specific Definitions - Card Dispenser Device Class MIB 3.10

Trim. II 35.240.40

1083 CWA 15748-46:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 46: XFS MIB Device Specific Definitions - Barcode Reader Device Class MIB 3.10

Trim. II 35.240.40

1084 CWA 15748-47:2011Extensions for Financial Services (XFS) interface specification - Release 3.10 - Part 47: XFS MIB Device Specific Definitions - Item Processing Module Device Class MIB Version 3.10

Trim. II 35.240.40

1085 EN 15749:2009 Fertilizers - Determination of sulfates content using three different methods Trim. II 65.080

1086 EN 15750:2009Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods

Trim. II 65.080

1087 CEN/TS 15754:2008Animal feeding stuffs - Determination of sugar content - High performance exchange chromatographic method (HPAEC-PAD)

Trim. II 65.120

1088 ISO 1576:1988 Tea -- Determination of water-soluble ash and water-insoluble ashGOST 28552-90 (ISO 1575-87, ISO 1576-88)

Trim. II 67.140.10

1089 CEN/TR 15760:2010Heat meters - Checklist documenting the relationship between the Directive 2004/22/EC (MID) and EN 1434:2007

Trim. II 17.200.10

1090 EN 15761:2009 Pre-shaped growing media - Determination of length, width, height, volume and bulk density Trim. II 65.080

1091 CEN/TR 15762:2008Road transport and traffic telematics - Electronic fee collection (EFC) - Ensuring the correct function of EFC equipment installed behind metallised windshield

Trim. II 35.240.60

1092 EN 15766:2009Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone

Trim. II 55.120

1093 EN 15780:2011 Ventilation for buildings - Ductwork - Cleanliness of ventilation systems Trim. II 91.140.30

1094 EN 15781:2009Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation

Trim. II 65.120

1095 EN 15782:2009Animal feeding stuffs - Determination of nicarbazin - High-performance liquid chromatographic method

Trim. II 65.120

1096 EN 15784:2009 Animal feeding stuffs - Isolation and enumeration of presumptive Bacillus spp. Trim. II 65.120

1097 EN 15785:2009 Animal feeding stuffs - Isolation and enumeration of Bifidobacterium spp. Trim. II 65.120

1098 EN 15786:2009 Animal feeding stuffs - Isolation and enumeration of Pediococcus spp. Trim. II 65.120

1099 EN 15787:2009 Animal feeding stuffs - Isolation and enumeration of Lactobacillus spp. Trim. II 65.120

1100 EN 15788:2009 Animal feeding stuffs - Isolation and enumeration of Enterococcus (E. faecium) spp. Trim. II 65.120

1101 EN 15789:2009 Animal feeding stuffs - Isolation and enumeration of yeast probiotic strains Trim. II 65.120

1102 EN 15804:2012+A1:2013Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products

Trim. II 91.010.99

Pagina 56 din 170





1103 EN 15812:2011Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability

Trim. II 91.100.50

1104 EN 15819:2011Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried

Trim. II 91.100.50

1105 CEN/TR 15840:2009 Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2 Trim. II 91.100.30

1106 CEN/TS 15844-1:2010 Postal services - ID-tagging of letter mail items - Part 1: ID-tag structure, message and binary Trim. II 03.240

1107 CEN/TS 15844-2:2010 Postal services - ID-tagging of letter mail items - Part 2: BNB-78 Encoding Specification Trim. II 03.240

1108 CEN/TS 15844-3:2010 Postal services - ID-tagging of letter mail items - Part 3: BNB-62 encoding specification Trim. II 03.240

1109 CEN/TS 15844-4:2010 Postal services - ID-tagging of letter mail items - Part 4: State encoding specification for flats Trim. II 03.240

1110 CEN/TS 15844-5:2010Postal services - ID-tagging of letter mail items - Part 5: 4-state encoding specification for small letters

Trim. II 03.240

1111 CEN/TR 15855:2009 Construction products - Assessment of release of dangerous substances - Barriers to trade Trim. II 91.100.01

1112 EN 15856:2010Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

Trim. II 19.100

1113 EN 15857:2010Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria

Trim. II 19.100

1114 CEN/TR 15858:2009Construction products - Assessment of the release of regulated dangerous substances from construction products based on the WT, WFT/FT procedures

Trim. II 91.100.01

1115 CEN/TR 15868:2009 Survey of national requirements used in conjunction with EN 206-1:2000 Trim. II 91.100.30

1116 CEN/TR 15872:2014 Health informatics - Guidance on patient identification and cross-referencing of identities Trim. II 35.240.80

1117 CEN/TS 15873:2009Postal Services - Open Standard Interface - Address Data File Format for OCR/VCS Dictionary Generation

Trim. II 03.240 35.240.69

1118 EN 15879-1:2011Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps

Trim. II 27.080

1119 EN 15885:2010 Classification and characteristics of techniques for renovation and repair of drains and sewers Trim. II 93.030

1120 ISO 15886-3:2012Agricultural irrigation equipment -- Sprinklers -- Part 3: Characterization of distribution and test methods

GOST ISO 7749-2-2004 Trim. II 65.060.35

1121 CEN/TR 15894:2009Building hardware - Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers

Trim. II 91.190

1122 CEN/TS 15901-1:2009Road and airfield surface characteristics - Part 1: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCS): RoadSTAR

Trim. II 93.080.20

Pagina 57 din 170





1123 CEN/TS 15901-10:2009Road and airfield surface characteristics - Part 10: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSK): the Skiddometer BV-8

Trim. II 93.080.20

1124 CEN/TS 15901-11:2011Road and airfield surface characteristics - Part 11: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSR): the SRM

Trim. II 93.080.20 93.120

1125 CEN/TS 15901-12:2011Road and airfield surface characteristics - Part 12: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip: the BV 11 and Saab friction tester (SFT)

Trim. II 93.080.20 93.120

1126 CEN/TS 15901-13:2011Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph

Trim. II 93.080.20 93.120

1127 CEN/TS 15901-15:2014Road and airfield surface characteristics - Part 15: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAG

Trim. II 93.080.20 93.120

1128 CEN/TS 15901-2:2009Road and airfield surface characteristics - Part 2: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL): ROAR (Road Analyser and Recorder of Norsemeter)

Trim. II 93.080.20

1129 CEN/TS 15901-3:2009Road and airfield surface characteristics - Part 3: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCA): The ADHERA

Trim. II 93.080.20

1130 CEN/TS 15901-4:2009Road and airfield surface characteristics - Part 4: Procedure for determining the skid resistance of pavements using a device with longitudinal controlled slip (LFCT): Tatra Runway Tester (TRT)

Trim. II 93.080.20

1131 CEN/TS 15901-5:2009Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter)

Trim. II 93.080.20

1132 CEN/TS 15901-6:2009Road and airfield surface characteristics - Part 6: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM®

Trim. II 93.080.20

1133 CEN/TS 15901-7:2009Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester®

Trim. II 93.080.20

1134 CEN/TS 15901-8:2009Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM

Trim. II 93.080.20 93.120

1135 CEN/TS 15901-9:2009Road and airfield surface characteristics - Part 9: Procedure for determining the skid resistance of a pavement surface by measurement of the longitudinal friction coefficient (LFCD): DWWNL skid resistance trailer

Trim. II 93.080.20

1136 EN 15905:2010Fertilizers - Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC)

Trim. II 65.080

1137 EN 15907:2010 Film identification - Enhancing interoperability of metadata - Element sets and structures Trim. II 35.240.30 97.195

Pagina 58 din 170





1138 EN 15909:2010 Fertilizers - Determination of calcium and formate in calcium foliar fertilizers Trim. II 65.080

1139 EN 1591-4:2013Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems

Trim. II 03.100.30 23.040.60

1140 EN 15919:2011 Fertilizers - Extraction of phosphorus soluble in 2 % formic acid Trim. II 65.080

1141 EN 15921:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at 65 °C Trim. II 65.080

1142 EN 15922:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature Trim. II 65.080 97.160

1143 EN 15923:2011 Fertilizers - Extraction of phosphorus soluble in Joulie's alcaline ammonium citrate Trim. II 65.080

1144 EN 15924:2011 Fertilizers - Determination of the fineness of grinding of soft natural phosphates Trim. II 65.080

1145 EN 15926:2011 Fertilizers - Extraction of water soluble sulfur where the sulfur is in various forms Trim. II 65.080

1146 EN 15928:2010 Fertilizers - Determination of the fineness of grinding (dry procedure) Trim. II 65.080

1147 EN 1593:1999/A1:2003 Non-destructive testing - Leak testing - Bubble emission techniques Trim. II 19.100

1148 CEN/TR 15941:2010Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data

Trim. II 35.240.67 91.010.99

1149 EN 15942:2011Sustainability of construction works - Environmental product declarations - Communication format business-to-business

Trim. II 35.240.67 91.040.99

1150 CEN/TS 15945:2011 Packaging - Ease of opening - Criteria and test methods for evaluating consumer packaging Trim. II 55.020

1151 EN 15946:2011 Conservation of cultural property - Packing principles for transport Trim. II 55.040 97.195

1152 EN 15957:2011 Fertilizers - Extraction of phosphorus which is soluble in neutral ammonium citrate Trim. II 65.080

1153 EN 15960:2011Fertilizers - Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates

Trim. II 65.080

1154 EN 15962:2011Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients

Trim. II 65.080

1155 CEN/TS 15963:2014Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

Trim. II 91.100.50

1156 EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods Trim. II 03.160 71.040.40

1157 EN 15969-1:2015Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data

Trim. II 35.240.60

1158 EN 15969-2:2011Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data

Trim. II 35.240.60

1159 CWA 15974:2009 Interoperability of the electronic European Health Insurance Cards (WS/eEHIC) Trim. II 35.240.15 35.240.80

1160 EN 15976:2011 Flexible sheets for waterproofing - Determination of emissivity Trim. II 91.100.50

Pagina 59 din 170





1161 EN 15978:2011Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method

Trim. II 91.040.99

1162 EN 15981:2011 European Learner Mobility - Achievement information (EuroLMAI) Trim. II 35.240.90

1163 EN 15981:2011/AC:2013 European Learner Mobility - Achievement information (EuroLMAI) Trim. II 35.240.90

1164 CEN/TR 15990:2010 Data Sheets - Footwear Tests Materials and Test Adhesives Trim. II 61.060 83.180

1165CEN/TR 15990:2010/AC:2010

Data Sheets - Footwear Tests Materials and Test Adhesives Trim. II 61.060 83.180

1166 EN 16002:2010Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing

Trim. II 91.100.50

1167 EN 16006:2011Animal feeding stuffs - Determination of the Sum of Fumonisin B1 & B2 in compound animal feed with immunoaffinity clean-up and RP-HPLC with fluorescence detection after pre- or post-column derivatisation

Trim. II 65.120

1168 EN 16007:2011Animal feeding stuffs - Determination of Ochratoxin A in animal feed by immunoaffinity column clean-up and High Performance Liquid Chromatography with fluorescence detection

Trim. II 65.120

1169 CWA 16008-1:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform - Release 2009 – Part 1: Base Architecture - Programmer's Reference

Trim. II 35.240.40

1170 CWA 16008-10:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform – Release 2009 - Part 10: Check Reader/Scanner Device Class Interface - Programmer's Reference

Trim. II 35.240.40

1171 CWA 16008-11:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform - Release 2009 - Part 11: Camera Device Class Interface - Programmer's Reference

Trim. II 35.240.40

1172 CWA 16008-12:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform - Release 2009 - Part 12: Vendor Dependant Mode Specification - Programmer's Reference

Trim. II 35.240.40

1173 CWA 16008-13:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform - Part 13: Scanner Device Class Interface - Programmer’s Reference

Trim. II 35.240.40

1174 CWA 16008-2:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform – Release 2009 - Part 2: Pin Keypad Device Class Interface - Programmer's Reference

Trim. II 35.240.40

1175 CWA 16008-3:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform – Release 2009 - Part 3: Magnetic Stripe & Chip Card Device Class Interface - Programmer's Reference

Trim. II 35.240.40

1176 CWA 16008-4:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform - Release 2009 - Part 4: Text Input/Output Device Class Interface - Programmer's Reference

Trim. II 35.240.40

1177 CWA 16008-5:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform - Release 2009 - Part 5: Cash Dispenser, Recycler and ATM Device Class Interface - Programmer's Reference

Trim. II 35.240.40

1178 CWA 16008-6:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform – Release 2009 - Part 6: Printer Device Class Interface - Programmer's Reference

Trim. II 35.240.40

1179 CWA 16008-7:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform – Release 2009 - Part 7: Alarm Device Class Interface - Programmer's Reference

Trim. II 35.240.40

Pagina 60 din 170





1180 CWA 16008-8:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform – Release 2009 - Part 8: Sensors and Indicators Unit Device Class Interface - Programmer's Reference

Trim. II 35.240.40

1181 CWA 16008-9:2009J/eXtensions for Financial Services (J/XFS) for the Java Platform - Release 2009 - Part 9: Depository Device Class Interface - Programmer's Reference

Trim. II 35.240.40

1182 EN 16016-2:2011Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples

Trim. II 19.100

1183 EN 16016-3:2011Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation

Trim. II 19.100

1184 EN 16016-4:2011 Non destructive testing - Radiation methods - Computed tomography - Part 4: Qualification Trim. II 19.100

1185 EN 16025-1:2013Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster

Trim. II 91.100.60

1186 EN 16025-2:2013Thermal and/ or sound insulating products in building construction - Bound EPS ballastings - Part 2: Processing of the factory premixed EPS dry plaster

Trim. II 91.100.60

1187 EN 16031:2012Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests

Trim. II 91.220

1188 EN 16035:2012Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows

Trim. II 91.190

1189 CEN/TR 16040:2010 Electronic fee collection - Requirements for urban dedicated short-range communication Trim. II 03.220.20 35.240.60

1190 CEN/TR 16045:2010Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods

Trim. II 91.100.01

1191 CWA 16052-2:2013 ICT Certification in Europe - Part 2: ICT Certification in Action Trim. II 35.240.99

1192 EN 16056:2012Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steels

Trim. II 67.250

1193 EN 16057:2012Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method

Trim. II 67.250

1194 CEN/TR 16061:2010 Gas meters - Smart Gas Meters Trim. II 91.140.40

1195 EN 16062:2015Intelligent transport systems - ESafety - eCall high level application requirements (HLAP) using GSM/UMTS circuit switched networks

Trim. II 35.240.60

1196 EN 16063:2011 Packaging - Rigid plastic containers - Nomenclature of plastic finishes Trim. II 55.100

1197 EN 16064:2011 Packaging - Rigid plastic containers - PET finish 30/25 High (18,5) Trim. II 55.100

1198 EN 16065:2011 Packaging - Rigid plastic containers - PET finish 30/25 Low (16,8) Trim. II 55.100

1199 EN 16066:2011 Packaging - Rigid plastic containers - PET finish 26,7 (lead 6,35) Trim. II 55.100

1200 EN 16067:2011 Packaging - Rigid plastic containers - PET finish 26,7 (lead 9,00) Trim. II 55.100

1201 EN 16068:2011 Packaging - Rigid plastic containers - PET finish 38 Trim. II 55.100

Pagina 61 din 170





1202 CEN/TS 16071:2010Interoperability of Flight Data Processing (Air Traffic Control - Air Traffic Control) for application under the Single European Sky - Interoperability Regulation EC 552/2004

Trim. II 35.240.60 49.020

1203 EN 16072:2015 Intelligent transport systems - ESafety - Pan-European eCall operating requirements Trim. II 35.240.60 43.040.15

1204 CEN/TS 16080:2013 Internet Content and communications filtering software and services Trim. II 35.080 35.240.95

1205 EN 16082:2011 Airport and aviation security services Trim. II 03.080.20 13.310

1206 ISO/IEC 16085:2006 Systems and software engineering -- Life cycle processes -- Risk managementSM GOST R ISO/CEI 16085:2009

Trim. II 35.080

1207 EN 16086-1:2011Soil improvers and growing media - Determination of plant response - Part 1: Pot growth test with Chinese cabbage

Trim. II 65.080

1208 EN 16086-2:2011Soil improvers and growing media - Determination of plant response - Part 2: Petri dish test using cress

Trim. II 65.080

1209 EN 16087-1:2011Soil improvers and growing media - Determination of the aerobic biological activity - Part 1: Oxygen uptake rate (OUR)

Trim. II 65.080

1210 EN 16087-2:2011Soil improvers and growing media - Determination of the aerobic biological activity - Part 2: Self heating test for compost

Trim. II 65.080

1211 CEN/TR 16092:2011 Electronic fee collection - Requirements for pre-payment systems Trim. II 03.220.20 35.240.60

1212 CWA 16100:2010 Guidelines for the design, implementation and operation of a product property server (ePPS) Trim. II 35.240.30

1213 EN 16102:2011 Intelligent transport systems - eCall - Operating requirements for third party support Trim. II 35.240.60

1214 EN 16104:2012 Food data - Structure and interchange format Trim. II 35.240.63

1215 CEN/TS 16118:2012Sheltered housing - Requirements for services for older people provided in a sheltered housing scheme

Trim. II 03.080.99

1216 CWA 16131:2010 Europass Diploma Supplement Application Profile of the EuroLMAI (EuroLMAI Europass DS AP) Trim. II 35.240.90

1217 CWA 16132:2010 European Learner Mobility Achievement Information (EuroLMAI) Trim. II 35.240.90

1218 CWA 16133:2010 Guidelines on a European Learner Mobility model Trim. II 35.240.90

1219 CEN/TS 16134:2011 Chimney terminals - General requirements and material independent test methods Trim. II 91.060.40

1220 EN 16140:2011Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles

Trim. II 91.100.15

1221 CEN/TR 16142:2011Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment

Trim. II 91.100.10 91.100.30

1222 EN 16145:2012 Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification Trim. II 91.140.70

1223 EN 16146:2012+A1:2014Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification

Trim. II 91.140.70

Pagina 62 din 170





1224 EN 16147:2011Heat pumps with electrically driven compressors - Testing and requirements for marking of domestic hot water units

Trim. II 27.080 27.200

1225 CEN/TS 16157-1:2011Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 1: Context and framework

Trim. II 35.240.60

1226 CEN/TS 16157-2:2011Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 2: Location referencing

Trim. II 35.240.60

1227 CEN/TS 16157-3:2011Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 3: Situation Publication

Trim. II 35.240.60

1228 CEN/TS 16157-4:2014Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 4: Variable Message Sign (VMS) Publications

Trim. II 35.240.60

1229 CEN/TS 16157-5:2014Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publications

Trim. II 35.240.60

1230 CEN/TS 16157-6:2015Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 6: Parking Publications

Trim. II 35.240.60

1231 EN 16158:2012Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a "tree" analytical approach

Trim. II 65.120

1232 EN 16159:2012Animal feeding stuffs - Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)

Trim. II 65.120

1233 EN 16160:2012 Animal feeding stuffs - Determination of Hydrocyanic acid by HPLC Trim. II 65.120

1234 EN 16162:2012 Animal feeding stuffs - Determination of decoquinate by HPLC with fluorescence detection Trim. II 65.120

1235 CEN/TS 16165:2016 Determination of slip resistance of pedestrian surfaces - Methods of evaluation Trim. II 03.100.544 35.240.604

1236 CWA 16180-1:2010The CEN ORCHID Roadmap Standardising Information Across the Plant Engineering Supply Chain - Part 1: Direction and Framework

Trim. II 03.100.99

1237 CWA 16180-2:2010The CEN ORCHID Roadmap Standardising Information Across the Plant Engineering Supply Chain - Part 2: Implementation Guide

Trim. II 03.100.99

1238 CWA 16180-3:2010The CEN ORCHID Roadmap Standardising Information Across the Plant Engineering Supply Chain - Part 3: Standards Landscape

Trim. II 03.100.99

1239 EN 16187:2015Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection after pre-column derivatisation

SM CEN/TS 16187:2014 Trim. II 67.230

1240 EN 16194:2012Mobile non-sewer-connected toilet cabins - Requirements of services and products relating to the deployment of cabins and sanitary products

Trim. II 03.080.30 91.040.99

1241 EN 16195:2012 Fertilizers - Determination of chlorides in the absence of organic material Trim. II 65.080

1242 EN 16196:2012Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate

Trim. II 65.080

1243 EN 16197:2012 Fertilizers - Determination of magnesium by atomic absorption spectrometry Trim. II 65.080

Pagina 63 din 170





1244 EN 16198:2012 Fertilizers - Determination of magnesium by complexometry Trim. II 65.080

1245 EN 16199:2012 Fertilizers - Determination of the sodium extracted by flame-emission spectrometry Trim. II 65.080

1246 CWA 16200:2010A Guide to the Development and Use of Standards Compliant Data Formats for Engineering Materials Test Data

Trim. II 35.040.99 35.240.99

1247 EN 16205:2013 Laboratory measurement of walking noise on floors Trim. II 91.120.20

1248 EN 16206:2012Animal feeding stuffs - Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)

Trim. II 65.120

1249 EN 16210:2013Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment

Trim. II 55.180.01

1250 EN 16211:2015 Ventilation for buildings - Measurement of air flows on site - Methods Trim. II 17.120.10 91.140.30

1251 EN 16212:2012 Energy Efficiency and Savings Calculation, Top-down and Bottom-up Methods Trim. II 27.010

1252 CEN/TS 16214-2:2014Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance

Trim. II 27.190 75.160.40

1253 EN 16214-3:2012Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3: Biodiversity and environmental aspects related to nature protection purposes

Trim. II 27.190

1254 EN 16214-4:2013Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 4: Calculation methods of the greenhouse gas emission balance using a life cycle analysis approach

Trim. II 27.190 75.160.40

1255 EN 16215:2012Animal feeding stuffs - Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS

Trim. II 65.120

1256 CEN/TR 16219:2011 Electronic Fee Collection - Value added services based on EFC on-board equipment Trim. II 35.240.60

1257 CWA 16221:2010 Vehicle security barriers - Performance requirements, test methods and guidance on application Trim. II 93.080.30

1258 EN 16231:2012 Energy efficiency benchmarking methodology Trim. II 03.080.99 13.020.20

1259 CEN/TR 16234-2:2016e-Competence Framework (e-CF) - A common European Framework for ICT Professionals in all industry sectors - Part 2: User Guide

Trim. II 03.100.546 35.240.606

1260 CWA 16234-3:2014European e-Competence Framework Version 3.0 - Part 3: Building the e-CF - A combination of sound methodology and expert contribution

Trim. II 35.020

1261 CWA 16234-4:2014European e-Competence Framework Version 3.0 - Part 4: Case studies for the application of the European e-Competence Framework 3.0

Trim. II 35.020

1262 EN 16237:2013 Classification of non-electrical sources of incoherent optical radiation Trim. II 17.180.20 17.240

1263 CEN/TS 16238:2011Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface

Trim. II 03.240 35.240.69

1264 EN 16247-5:2015 Energy audits - Part 5: Competence of energy auditors Trim. II 03.120.10 03.120.20

Pagina 64 din 170





1265 CWA 16255:2010Meat raw materials obtained by deboning - Assessment of the muscle fibre structure - Pork, poultry and rabbit

Trim. II 67.120.01

1266 EN 16258:2012Methodology for calculation and declaration of energy consumption and GHG emissions of transport services (freight and passengers)

Trim. II 03.220.01

1267 CWA 16259:2014 Responsible Remote Gambling Measures Trim. II 35.240.95 97.200.99 27.010

1268 CWA 16266:2011 Curriculum for training ICT Professionals in Universal Design Trim. II 03.100.30 35.020

1269 CWA 16267:2011 Guidelines for Sustainable Development of Historic and Cultural Cities - Qualicities Trim. II 91.020

1270 EN 16268:2013 Perfomance of reflecting surfaces for luminaires Trim. II 29.140.40

1271 EN 16271:2012Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product

Trim. II 03.100.10

1272 CWA 16275:2011Guidelines for the selection of consultants advising SMEs on integrated quality, environment, health and safety management systems

Trim. II 03.100.30 03.100.70

1273 EN 16276:2013 Evacuation Lighting in Road Tunnels Trim. II 93.080.40

1274 EN 16277:2012Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide)

Trim. II 65.120

1275 EN 16278:2012Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE)

Trim. II 65.120

1276 EN 16279:2012Animal feeding stuffs - Determination of fluoride content after hydrochloric acid treatment by ion-sensitive electrode method (ISE)

Trim. II 65.120

1277 EN 16283:2013Packaging - Flexible aluminium tubes - Test method to measure the force to pierce the membrane

Trim. II 55.120

1278 EN ISO 16283-2:2015Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2015)

Trim. II 91.060.30 91.120.20

1279 EN 16284:2013Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane

Trim. II 55.120

1280 EN 16285:2013Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)

Trim. II 55.120

1281 EN 16287-1:2014 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 1 finish Trim. II 55.100

1282 EN 16287-2:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 1 finish Trim. II 55.100



1285 EN 16289:2013 Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish Trim. II 55.100

Pagina 65 din 170





1286 EN 16290-1:2014 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 7,5 R finish Trim. II 55.100

1287 EN 16290-2:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 7,5 R finish Trim. II 55.100



1290EN 16291-2:2013/AC:2014

Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish Trim. II 55.100

1291 EN 16292:2013 Glass packaging - Screw finishes - Depressed threads Trim. II 55.100

1292 EN 16293:2013 Packaging - Glass Packaging - Deep BVS finishes for still wines Trim. II 55.100

1293 CEN/TS 16305:2012Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions

Trim. II 65.080

1294 CWA 16308:2011 Framework for consumer rental conditions Trim. II 03.080.30

1295 EN 16309:2014+A1:2014Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology

Trim. II 91.040.01

1296 EN 16312:2013Intelligent transport systems - Automatic Vehicle and Equipment Registration (AVI/AEI) - Interoperable application profile for AVI/AEI and Electronic Register Identification using dedicated short range communication

Trim. II 35.240.60

1297 EN 16313:2013Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone

Trim. II 91.140.10

1298 EN 16314:2013 Gas meters - Additional functionalities Trim. II 91.140.40

1299 CEN/TS 16316:2012 Postal services - Open interface - Sortplan Trim. II 03.240 35.240.69

1300 EN 16317:2013Fertilizers - Determination of trace elements - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution

Trim. II 65.080

1301 EN 16319:2013+A1:2015Fertilizers and liming materials - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution

Trim. II 65.080

1302 EN 16320:2013Fertilizers - Determination of trace elements - Determination of mercury by vapour generation (VG) after aqua regia dissolution

Trim. II 65.080

1303 EN 16325:2013+A1:2015 Guarantees of Origin related to energy - Guarantees of Origin for Electricity Trim. II 27.010

1304 CEN/TS 16326:2013 Postal Services - Hybrid Mail - Functional Specification for postal registered electronic mail Trim. II 03.240 35.240.69

1305 CEN/TS 16331:2012 Electronic fee collection - Interoperable application profiles for autonomous systems Trim. II 03.220.20 35.240.60

1306 CWA 16335:2011 Biosafety professional competence Trim. II 03.100.30 07.100.01

Pagina 66 din 170





1307 EN 16340:2014Safety and control devices for burners and appliances burning gaseous or liquid fuels - Combustion product sensing devices

Trim. II 27.060.20

1308 CEN/TR 16349:2012Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete

Trim. II 91.100.30

1309 EN 16352:2013 Logistics - Specifications for reporting crime incidents Trim. II 03.100.10 35.240.60

1310 CEN/TR 16353:2012Packaging - Safety guidelines for flexible plastic packaging to minimize the risk of suffocation to children

Trim. II 55.040

1311 CEN/TR 16355:2012Recommendations for prevention of Legionella growth in installations inside buildings conveying water for human consumption

Trim. II 91.140.60

1312 CWA 16356-1:2011Guide for a European CORE INVOICE data model with UN/CEFACT CII Implementation Guideline - Part 1: Introduction

Trim. II 35.240.63

1313 CWA 16356-2:2011Guide for a European CORE INVOICE data model with UN/CEFACT CII Implementation Guideline - Part 2: European CORE INVOICE data model

Trim. II 35.240.63

1314 CWA 16356-3:2011Guide for a European CORE INVOICE data model with UN/CEFACT CII Implementation Guideline - Part 3: European CORE INVOICE syntax mapping

Trim. II 35.240.63

1315 EN 16357:2013Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid

Trim. II 65.080

1316 EN 16361:2013+A1:2016Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation

SM EN 16361:2014 Trim. II 03.100.452 35.240.512

1317 CWA 16367:2011 Implementing e-Competence Framework into SMEs Trim. II 35.020

1318 CEN/TR 16369:2012 Use of control charts in the production of concrete Trim. II 03.120.30 91.100.30

1319 CEN/TS 16371:2012 Guidelines for implementors of EN 15744 and EN 15907 Trim. II 35.240.30 37.060.99

1320 CWA 16373:2011 Best practice approach for electromagnetic induction (EMI) measurements of the near surface Trim. II 17.220.20

1321 CWA 16374-1:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 1: Application Programming Interface (API) Service Provider Interface (SPI) Programmer's Reference

Trim. II 35.240.40

1322 CWA 16374-10:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 10: Sensors and Indicators Unit Device Class Interface Programmer's Reference

Trim. II 35.240.40

1323 CWA 16374-11:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 11: Vendor Dependent Mode Device Class Interface Programmer's Reference

Trim. II 35.240.40

1324 CWA 16374-12:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 12: Camera Device Class Interface Programmer's Reference

Trim. II 35.240.40

1325 CWA 16374-13:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 13: Alarm Device Class Interface Programmer's Reference

Trim. II 35.240.40

1326 CWA 16374-14:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 14: Card Embossing Unit Device Class Interface Programmer's Reference

Trim. II 35.240.40

1327 CWA 16374-15:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 15: Cash-In Module Device Class Interface Programmer's Reference

Trim. II 35.240.40

Pagina 67 din 170





1328 CWA 16374-16:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 16: Card Dispenser Device Class Interface Programmer's Reference

Trim. II 35.240.40

1329 CWA 16374-17:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 17: Barcode Reader Device Class Interface Programmer's Reference

Trim. II 35.240.40

1330 CWA 16374-18:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 18: Item Processing Module Device Class Interface Programmer's Reference

Trim. II 35.240.40

1331 CWA 16374-2:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 2: Service Class Definition Programmer's Reference

Trim. II 35.240.40

1332 CWA 16374-29:2014Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 29: XFS MIB Architecture and SNMP Extensions MIB 3.20

Trim. II 35.200 35.240.15

1333 CWA 16374-3:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 3: Printer and Scanning Device Class Interface Programmer's Reference

Trim. II 35.240.40


Trim. II 35.240.40

1335 CWA 16374-31:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 31: XFS MIB Device Specific Definitions – Identification Card Device Class MIB 3.20

Trim. II 35.240.40 35.240.40

1336 CWA 16374-32:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 32: XFS MIB Device Specific Definitions – Cash Dispenser Device Class MIB 3.20

Trim. II 35.200 35.240.15

1337 CWA 16374-33:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 33: XFS MIB Device Specific Definitions – PIN Keypad Device Class MIB 3.20

Trim. II 35.240.40

1338 CWA 16374-34:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 34: XFS MIB Device Specific Definitions - Check Reader/Scanner Device Class MIB 3.20

Trim. II 35.240.40

1339 CWA 16374-35:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 35: XFS MIB Device Specific Definitions – Depository Device Class MIB 3.20

Trim. II 35.240.40 35.240.40

1340 CWA 16374-36:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 36: XFS MIB Device Specific Definitions – Text Terminal Unit Device Class MIB 3.20

Trim. II 35.240.40

1341 CWA 16374-37:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 37: XFS MIB Device Specific Definitions – Sensors and Indicators Unit Device Class MIB 3.20

Trim. II 35.240.40

1342 CWA 16374-38:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 38: XFS MIB Device Specific Definitions – Camera Device Class MIB 3.20

Trim. II 35.200 35.240.15

1343 CWA 16374-39:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 39: XFS MIB Device Specific Definitions – Alarm Device Class MIB 3.20

Trim. II 35.200 35.240.15

1344 CWA 16374-4:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 4: Identification Card Device Class Interface Programmer's Reference

Trim. II 35.240.40

1345 CWA 16374-40:2014Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 40: XFS MIB Device Specific Definitions – Card Embossing Unit Device Class MIB 3.20

Trim. II 35.240.40 35.240.40

Pagina 68 din 170





1346 CWA 16374-41:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 41: XFS MIB Device Specific Definitions – Cash-In Module Device Class MIB 3.20

Trim. II 35.240.40 35.240.40

1347 CWA 16374-43:2014Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 43: XFS MIB Device Specific Definitions - Vendor Dependent Mode Class MIB 3.20

Trim. II 35.240.40

1348 CWA 16374-44:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 44: XFS MIB Application Management MIB 3.20

Trim. II 35.200 35.240.15

1349 CWA 16374-45:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 - Part 45: XFS MIB Device Specific Definitions - Card Dispenser Device Class MIB 3.20

Trim. II 35.240.40

1350 CWA 16374-46:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 46: XFS MIB Device Specific Definitions – Barcode Reader Device Class MIB 3.20

Trim. II 35.200 35.240.15

1351 CWA 16374-47:2014Extensions for Financial Services (XFS) interface specification – Release 3.20 – Part 47: XFS MIB Device Specific Definitions – Item Processing Module Device Class MIB Version 3.20

Trim. II 35.240.40 35.240.40

1352 CWA 16374-5:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 5: Cash Dispenser Device Class Interface Programmer's Reference

Trim. II 35.240.40

1353 CWA 16374-6:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 6: PIN Keypad Device Class Interface Programmer's Reference

Trim. II 35.240.40 35.240.40

1354 CWA 16374-61:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 61: Application Programming Interface (API) Service Provider Interface (SPI) Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1355 CWA 16374-62:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 62: Printer and Scanning Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1356 CWA 16374-63:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 63: Identification Card Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1357 CWA 16374-64:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 64: Cash Dispenser Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1358 CWA 16374-65:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 65: PIN Keypad Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1359 CWA 16374-66:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 66: Check Reader/Scanner Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1360 CWA 16374-67:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 67: Depository Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

Pagina 69 din 170





1361 CWA 16374-68:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 68: Text Terminal Unit Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1362 CWA 16374-69:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 69: Sensors and Indicators Unit Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1363 CWA 16374-7:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 7: Check Reader/Scanner Device Class Interface Programmer's Reference

Trim. II 35.240.40

1364 CWA 16374-70:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 70: Vendor Dependent Mode Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1365 CWA 16374-71:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 71: Camera Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1366 CWA 16374-72:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 72: Alarm Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1367 CWA 16374-73:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 73: Card Embossing Unit Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1368 CWA 16374-74:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 74: Cash-In Module Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1369 CWA 16374-75:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 75: Card Dispenser Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1370 CWA 16374-76:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 76: Barcode Reader Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1371 CWA 16374-77:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 77: Item Processing Module Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmer's Reference

Trim. II 35.240.40

1372 CWA 16374-8:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 8: Depository Device Class Interface Programmer's Reference

Trim. II 35.240.40

1373 CWA 16374-9:2011Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 9: Text Terminal Unit Device Class Interface Programmer's Reference

Trim. II 35.240.40

1374 CEN/TS 16375:2013Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method

Trim. II 65.080

1375 CWA 16385:2012 Interoperability of Registries Trim. II 03.180 35.240.90

1376 CWA 16387:2011 Clean Harbours - Guidelines Trim. II 93.140

1377 ISO/IEC 16390:2007Information technology -- Automatic identification and data capture techniques -- Interleaved 2 of 5 bar code symbology specification

GOST ISO/CEI 16390-2005 Trim. II 35.040.50 01.080.50

Pagina 70 din 170





1378 CWA 16390:2012Interface control document for provision of EGNOS CS/EDAS based services for tracking and tracing of the transport of goods

Trim. II 35.240.60

1379 EN 16392-2:2014Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2: Probes

Trim. II 19.100

1380 CEN/TR 16405:2013Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles eCall

Trim. II 03.220.20 35.240.60

1381 CEN/TS 16406:2013 Intelligent transport systems - Public transport - Indirect Fulfilment for Rail Trim. II 03.220.30 35.240.60

1382 EN 16407-1:2014Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection

Trim. II 19.100 23.040.01

1383 EN 16407-2:2014Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection

Trim. II 19.100 23.040.01

1384 CWA 16408:2012 Testing Framework for Global eBusiness Interoperability Test Beds (GITB) Trim. II 35.240.63

1385 CEN/TR 16410:2012Construction products - Assessment of release of dangerous substances - Barriers to use - Extension to CEN/TR 15855 Barriers to trade

Trim. II 91.010.10

1386 CEN/TR 16412:2012 Supply chain security (SCS) - Good practice guide for small and medium sized operators Trim. II 03.100.10

1387 EN 16425:2014 Simple Publishing Interface Trim. II 35.240.30 35.240.99

1388 EN 16430-1:2014Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements

Trim. II 91.140.10

1389 EN 16430-2:2014Fan assisted radiators, convectors and trench convectors - Part 2: Test method and rating for thermal output

Trim. II 91.140.10

1390 EN 16430-3:2014Fan assisted radiators, convectors and trench convectors - Part 3: Test method and rating for cooling capacity

Trim. II 91.140.10

1391 CEN/TR 16435:2012 Liquid petroleum products - Oxygenates blending in line with actual EN 228 requirements Trim. II 91.100.01

1392 EN 16440-1:2015Testing methodologies of refrigerating devices for insulated means of transport - Part 1: Mechanical cooling device with forced air circulation evaporator with or without heating device

Trim. II 27.200

1393 CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007 - Fly ash for concrete Trim. II 91.100.30

1394 EN 16445:2013Ventilation for buildings - Air diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet

Trim. II 91.140.30

1395 EN 16454:2015 Intelligent transport systems - ESafety - ECall end to end conformance testing Trim. II 35.240.60

1396 CWA 16458:2012 European ICT Professional Profiles Trim. II 35.020

1397 CWA 16460:2012 Good Practice: e-Invoicing Compliance Guidelines - The Commentary Trim. II 35.240.63

1398 CWA 16461:2012 Electronic invoice processes in Europe and enablement of SMEs to use them efficiently Trim. II 35.240.63

1399 CWA 16462:2012 CEN e-Invoice Gateway Trim. II 35.240.63

1400 CWA 16463:2012 Code of Practice for Electronic Invoicing in the European Union Trim. II 35.240.63

1401 CWA 16464-1:2012 Electronic invoicing - Part 1: Addressing and Routing Trim. II 35.240.63

Pagina 71 din 170





1402 CWA 16464-2:2012Electronic invoicing - Part 2: Model Interoperability Agreement for Transmission and Processing of Electronic Invoices and other Business Documents

Trim. II 35.240.63

1403 CWA 16464-3:2012Electronic invoicing - Part 3: Conformance Criteria for Interoperability between Electronic Invoicing Services

Trim. II 35.240.63

1404 EN 16466-1:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 1: 2H-NMR analysis of acetic acid Trim. II 67.220.10

1405 EN 16466-2:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 2: 13C-IRMS analysis of acetic acid Trim. II 67.220.10

1406 EN 16466-3:2013Vinegar - Isotopic analysis of acetic acid and water - Part 3: 18O-IRMS analysis of water in wine vinegar

Trim. II 67.220.10

1407 EN 16481:2014 Timber stairs - Structural design - Calculation methods Trim. II 91.060.30

1408 EN 16485:2014Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based products for use in construction

Trim. II 91.010.99 91.080.20

1409 EN 16487:2014 Acoustics - Test code for suspended ceilings - Sound absorption Trim. II 91.060.30 91.120.20

1410 EN 16489-1:2014 Professional indoor UV exposure services - Part 1: Requirements for the provision of training Trim. II 03.080.30

1411 EN 16489-2:2014Professional indoor UV exposure services - Part 2: Required qualification and competence of the indoor UV exposure consultant

Trim. II 03.080.30

1412 EN 16489-3:2014 Professional indoor UV exposure services - Part 3: Requirements for the provision of services Trim. II 03.080.30

1413 EN 1649:2004 AIDC technologies - Operational aspects affecting the reading of bar code symbols Trim. II 35.040.50

1414 CEN/TS 16490:2013Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions

Trim. II 65.080

1415 EN 16495:2014Air Traffic Management - Information security for organisations supporting civil aviation operations

Trim. II 03.220.50 35.040

1416 CEN/TR 16496:2013Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods

Trim. II 91.100.01

1417 EN 16497-1:2015 Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications Trim. II 91.060.40

1418 CEN/TS 16501:2013 Air Traffic Management - Specification for software assurance levels Trim. II 35.240.60

1419 CWA 16504:2012 Simplified multilateral EDI - Secure electronic data interchange in non-hierarchical networks Trim. II 35.240.63

1420 CWA 16505:2012 Container Security & Tracking Devices - Technical Specifications and Communication Standards Trim. II 35.240.60 55.180.10

1421 EN 16508:2015Temporary works equipment - Encapsulation constructions - Performance requirements and general design

Trim. II 91.120.01 91.200

1422 CWA 16519:2012 Design and Construction Code for mechanical equipments of innovative nuclear installations Trim. II 27.120.01

1423 CEN/TS 16555-1:2013 Innovation Management - Part 1: Innovation Management System Trim. II 03.100.40 03.100.50

Pagina 72 din 170





1424 CEN/TS 16555-2:2014 Innovation management - Part 2: Strategic intelligence management Trim. II 03.100.40 03.100.50

1425 CEN/TS 16555-3:2014 Innovation management - Part 3: Innovation thinking Trim. II 03.100.40 03.100.50

1426 CEN/TS 16555-4:2014 Innovation management - Part 4: Intellectual property management Trim. II 03.100.40 03.100.50 03.100.70

1427 CEN/TS 16555-5:2014 Innovation management - Part 5: Collaboration management Trim. II 03.100.40 03.100.50

1428 CEN/TS 16555-6:2014 Innovation management - Part 6: Creativity management Trim. II 03.100.40 03.100.50

1429 CEN/TS 16555-7:2015 Innovation management - Part 7: Innovation Management Assessment Trim. II 03.100.40 03.100.50 03.140

1430 CWA 16558:2013 Business Interoperability Interfaces for Public procurement in Europe - BII Architecture Trim. II 03.100.10 35.240.20

1431 CWA 16559:2013 Business Interoperability Interfaces for Public procurement in Europe - Tender Notification Trim. II 03.100.10 35.240.20

1432 CWA 16560:2013Business Interoperability Interfaces for Public procurement in Europe - Use of profiles in the tendering process

Trim. II 03.100.10 35.240.20

1433 CWA 16561:2013 Business Interoperability Interfaces for Public procurement in Europe - eCatalogue profiles Trim. II 03.100.10 35.240.20 35.240.63

1434 CWA 16562:2013 Business Interoperability Interfaces for public procurement in Europe - Post award profiles Trim. II 03.100.10 35.240.20 35.240.63

1435 CEN/TR 16563:2013 Principles of the equivalent durability procedure Trim. II 91.100.30 35.240.63

1436 EN 16565:2014 Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap Trim. II 55.120 35.240.63

1437 EN 16566:2014Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards

Trim. II 91.100.99 35.240.63

1438 CEN/CLC/TR 16567:2013Energy Efficiency Obligation Schemes in Europe - Overview and analysis of main features and possibilities for harmonisation

Trim. II 27.010

1439 EN 16570:2014Information technology - Notification of RFID - The information sign and additional information to be provided by operators of RFID application systems

Trim. II 35.240.60

1440 EN 16571:2014 Information technology - RFID privacy impact assessment process Trim. II 35.240.60

1441 EN 16580:2015 Windows and doors - Wetness and splash water proof door leaves - Test and classification Trim. II 91.060.50

1442 EN 16583:2015 Heat exchangers - Hydronic room fan coils units - Determination of the sound power level Trim. II 27.060.30

1443 EN 16592:2014 Packaging - Rigid plastic containers - PET finish 29/25 (12,6) Trim. II 55.100

1444 EN 16593:2014 Packaging - Rigid plastic containers - PET finish BVS 30H60 Trim. II 55.100

1445 EN 16594:2014 Packaging - Rigid plastic containers - PET finish 26/22 (12,0) Trim. II 55.100

1446 CWA 16597:2013 FishBizz Business Case - For monitoring of quality and sales of fish products Trim. II 35.240.63 65.150

Pagina 73 din 170





1447 EN 16603-50-04:2014Space engineering - Space data links - Telecommand protocols, synchronization and channel coding

Trim. II 33.040.40 49.090

1448 EN 16603-50-53:2015 Space engineering - SpaceWire - CCSDS packet transfer protocol Trim. II 33.040.40 49.140

1449 EN ISO 16610-22:2015Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015)

Trim. II 17.040.20

1450 EN ISO 16610-29:2015Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets (ISO 16610-29:2015)

Trim. II 17.040.20 49.140

1451 EN ISO 16610-40:2015Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015)

Trim. II 17.040.20

1452 EN ISO 16610-41:2015Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)

Trim. II 17.040.20

1453 EN ISO 16610-49:2015Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015)

Trim. II 17.040.20

1454 EN ISO 16610-60:2015Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)

Trim. II 17.040.30

1455 EN ISO 16610-61:2015Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015)

Trim. II 17.040.20

1456 CEN/TS 16614-1:2014Public transport - Network and Timetable Exchange (NeTEx) - Part 1: Public transport network topology exchange format

Trim. II 35.240.60

1457 CEN/TS 16614-2:2014Public transport - Network and Timetable Exchange (NeTEx) - Part 2: Public transport scheduled timetables exchange format

Trim. II 35.240.60

1458 EN 16618:2015Food analysis - Determination of acrylamide in food by liquid chromatography tandem mass spectrometry (LC-ESI-MS/MS)

Trim. II 67.050 67.060

1459 EN 16619:2015Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by gas chromatography mass spectrometry (GC-MS)

Trim. II 67.050

1460 EN 16620:2015Food analysis - Determination of furan in coffee and coffee products by headspace gas chromatography and mass spectrometry (HS GC-MS)

Trim. II 67.140.20

1461 EN 16622:2015 Silica-calcium fume for concrete - Definitions, requirements and conformity criteria Trim. II 91.100.30 67.080.20 67.140.20

1462 CWA 16624-1:2013 e-Competence Framework for ICT Users - Part 1: Framework Content Trim. II 35.020

1463 CWA 16624-2:2013 e-Competence Framework for ICT Users - Part 2: User Guidelines Trim. II 35.020

1464 CWA 16624-3:2013 e-Competence Framework for ICT Users - Part 3: Development Guidelines Trim. II 35.020

1465 CEN/TR 16625:2013Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value and declared value (MLV and MDV) - 95 % Statistic

Trim. II 91.100.50

1466 EN 16627:2015Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods

Trim. II 91.040.01

1467 CEN/TS 16628:2014 Energy Performance of Buildings - Basic Principles for the set of EPB standards Trim. II 91.140.99

1468 CEN/TS 16629:2014 Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards Trim. II 91.140.99

Pagina 74 din 170





1469 CEN/TR 16632:2014Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations

Trim. II 91.100.10

1470 CWA 16633:2013Ageing behaviour of Structural Components with regard to Integrated Lifetime Assessment and subsequent Asset Management of Constructed Facilities

Trim. II 91.010.30

1471 EN 16636:2015 Pest management services - Requirements and competences Trim. II 03.080.99 65.100.01

1472 CEN/TR 16638:2014 Non-destructive testing - Penetrant and magnetic particle testing using blue light Trim. II 19.100

1473 CEN/TR 16639:2014Use of k-value concept, equivalent concrete performance concept and equivalent performance of combinations concept

Trim. II 91.100.30

1474 EN 16646:2014 Maintenance - Maintenance within physical asset management Trim. II 03.100.01

1475 EN 16648:2015 Conservation of cultural heritage - Transport methods Trim. II 55.180.99 97.195

1476 CWA 16649:2013 Managing emerging technology-related risks Trim. II 03.100.01

1477 EN 16651:2015Fertilizers - Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT) - Method using high-performance liquid chromatography (HPLC)

Trim. II 65.080

1478 EN 16654:2015Child protective products - Consumer fitted finger protection devices for doors - Safety requirements and test methods

Trim. II 91.060.50 97.190

1479 CWA 16655-1:2013 InLOC - Part 1: Information Model for Learning Outcomes and Competences Trim. II 35.020

1480 CWA 16655-2:2013InLOC - Part 2: Guidelines including the integration of Learning Outcomes and Competences into existing specifications

Trim. II 35.020

1481 CWA 16655-3:2013InLOC - Part 3: Application Profile of Europass Curriculum Vitae and Language Passport for Integrating Learning Outcomes and Competences

Trim. II 35.020

1482 EN 16656:2014Information technology - Radio frequency identification for item management - RFID Emblem (ISO/IEC 29160:2012, modified)

Trim. II 35.040.50

1483 EN 16661:2015Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements

Trim. II 17.100 35.240.99

1484 CEN/TS 16663:2016Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment – Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method

Trim. II 03.100.78 35.240.138

1485EN ISO 16663-2:2003/AC:2006

Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2003/Cor.1:2005)

Trim. II 65.150

1486 CWA 16667:2013Reference Architecture 2.0 for eBusiness harmonisation in Textile/Clothing and Footwear sectors

Trim. II 35.240.63 43.180 83.160.10

1487 CEN/TR 16669:2014 Information technology - Device interface to support ISO/IEC 18000-3 Trim. II 35.240.60

1488 CEN/TR 16670:2014 Information technology - RFID threat and vulnerability analysis Trim. II 35.240.60

1489 CEN/TR 16671:2014 Information technology - Authorization of mobile phones when used as RFID interrogators Trim. II 33.070.01 35.240.60

1490 CEN/TR 16672:2014 Information technology - Privacy capability features of current RFID technologies Trim. II 35.240.60

Pagina 75 din 170





1491 CEN/TR 16673:2014 Information technology - RFID privacy impact assessment analysis for specific sectors Trim. II 35.240.60

1492 CEN/TR 16674:2014 Information technology - Analysis of privacy impact assessment methodologies relevant to RFID Trim. II 35.240.60

1493 CEN/TR 16676:2014 Energy losses by industrial door Trim. II 91.060.50

1494 EN 16679:2014 Packaging - Tamper verification features for medicinal product packaging Trim. II 03.120.10 11.120.10

1495 CEN/TR 16684:2014Information technology - Notification of RFID - Additional information to be provided by operators

Trim. II 35.240.60

1496 CEN/TS 16685:2014Information technology - Notification of RFID - The information sign to be displayed in areas where RFID interrogators are deployed

Trim. II 35.240.60

1497 CEN/TR 16690:2014 Electronic fee collection - Guidelines for EFC applications based on in-vehicle ITS stations Trim. II 35.240.60 55.020

1498 CEN/TS 16702-1:2014Electronic fee collection - Secure monitoring for autonomous toll systems - Part 1: Compliance checking

Trim. II 35.240.60

1499 CEN/TS 16702-2:2015Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder

Trim. II 03.220.20 35.240.60

1500 EN 16703:2015Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation

Trim. II 91.060.10 91.120.20

1501 CEN/TR 16706:2014 Postal Services - Quality of Service - Measurement of incorrect delivery - Feasibility Report Trim. II 03.240

1502 EN 1672-1:2014 Food processing machinery - Basic concepts - Part 1: Safety requirements Trim. II 67.260

1503 EN 16724:2015Thermal insulation products for building applications - Instructions for mounting and fixing for determination of the reaction to fire testing of external thermal Insulation composite systems (ETICS)

Trim. II 91.100.60

1504 EN 16732:2015 Slide fasteners (zips) - Specification Trim. II 61.040

1505 CEN/TS 16735:2015 Postal services - Extensible Common Structure and Representation for Postal Rates - EPR Trim. II 03.240

1506 EN 16736:2015 Health risk assessment of chemicals - Requirements for the provision of training Trim. II 03.100.30 71.100.01

1507 CEN/TR 16742:2014 Intelligent transport systems - Privacy aspects in ITS standards and systems in Europe Trim. II 35.240.60

1508 CWA 16744-1:2014Improving transparency in financial and business reporting - Harmonisation topics - Part 1: European Data Point Methodology for supervisory reporting

Trim. II 35.240.40 35.240.60

1509 CWA 16744-3:2014Improving transparency in financial and business reporting - Harmonisation topics - Part 3: European XBRL Taxonomy Architecture

Trim. II 35.240.40 35.240.60

1510 CWA 16744-4:2014Improving transparency in financial and business reporting - Harmonisation topics - Part 4: European Filing Rules

Trim. II 35.240.40 35.240.60

1511 CWA 16744-5:2014Improving transparency in financial and business reporting - Harmonisation topics - Part 5: Mapping between DPM and MDM

Trim. II 35.240.40 35.240.60

1512 CWA 16745:2014 Improving transparency in financial and business reporting - Metadata container Trim. II 35.240.40 35.240.60

Pagina 76 din 170





1513 CWA 16746-1:2014Improving transparency in financial and business reporting - Standard regulatory roll-out package for better adoption - Part 1: XBRL Supervisory Roll-out Guide

Trim. II 35.240.40 35.240.60

1514 CWA 16746-2:2014Improving transparency in financial and business reporting - Standard regulatory roll-out package for better adoption - Part 2: XBRL Handbook for Declarers

Trim. II 35.240.40 35.240.60

1515 EN 16747:2015 Maritime and port security services Trim. II 03.080.20 03.220.40

1516 CWA 16762:2014CEN Workshop Agreement - CEN/WS SERES - ICT Standards in Support of an eReporting Framework for the Engineering Materials Sector

Trim. II 35.240.50

1517 EN 16775:2015 Expertise activities - General requirements for expertise services Trim. II 03.080.99

1518 CEN/TR 16792:2014Safety of children's clothing - Recommendations for the design and manufacture of children's clothing - Mechanical safety

Trim. II 61.020 97.190 13.310

1519 CEN/TS 16794-1:2015Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443

Trim. II 35.240.15

1520 CEN/TS 16794-2:2015Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443

Trim. II 35.240.15

1521 CEN/TR 16797-1:2015Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application

Trim. II 03.120.20 91.100.01

1522 CEN/TR 16797-2:2015Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background

Trim. II 03.120.20 91.100.01

1523 CWA 16799:2014 Validation of computational solid mechanics models Trim. II 35.240.50

1524 CWA 16814:2014Nutritionally correct low-cost food for people at risk of poverty - General, specific requirements and labelling of CHANCE food

Trim. II 67.040

1525 CEN/TR 16815:2015 CleANopen - Application profile for municipal vehicles Trim. II 35.240.60 43.040.15

1526 CEN/TS 16819:2015 Postal services - Parcel boxes for end use - Technical features Trim. II 03.240

1527 CEN/TR 16829:2016 Fire and explosion prevention and protection for bucket elevators Trim. II 03.100.560 35.240.620

1528 CEN/TR 16862:2015 Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence Trim. II 03.100.30 25.160.10 43.160

1529 CWA 16871-1:2015Requirements and Recommendations for Assurance in Cloud Security - Part 1: Contributed recommendations from European projects

Trim. II 33.020 35.030

1530 CWA 16874:2015 Verification of performance levels of EGNOS Enabled mass-market receivers Trim. II 33.070.40

1531 CEN/TR 16875:2015Cereal and cereal products - Technical report of the interlaboratory study for the determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)

Trim. II 67.060

1532 CEN/TS 16880:2015 Service excellence - Creating outstanding customer experiences through service excellence Trim. II 03.080.01 03.100.99 35.210

1533 CEN/TR 16886:2016Guidance on the application of statistical methods for determining the properties of masonry products

Trim. II 03.100.42 35.240.102

Pagina 77 din 170





1534 CEN/TR 16894:2015 Postal services - Quality of delivery: Reforwarding Trim. II 03.240

1535 ISO 16902-1:2003Hydraulic fluid power -- Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method -- Part 1: Pumps

GOST ISO 16902.1-2006 Trim. II 23.100.10 17.140.20 03.120.99

1536 CEN/TR 16911:2015Heat meters - Recommendations for circulation water in industrial and district heating systems and their operation

Trim. II 91.140.10

1537 CEN/TR 16915:2015 Postal Services - Quality of service - Damage to postal items Trim. II 03.240

1538 CWA 16938:2015 Standard documentation of chemical exposure models Trim. II 03.120.30 13.020.60

1539 CEN/TR 16946-2:2016Energy Performance of Buildings - Inspection of Building Automation, Controls and Technical Building Management - Part 2: Accompanying TR prEN 16946-1:2015 - Modules M10-11

Trim. II 03.100.296 35.240.356

1540 CEN/TR 16947-2:2016 Building Management System - Part 2: Accompanying prEN 16947-1:2015 - Modules M10-12 Trim. II 03.100.297 35.240.357

1541 CEN/TR 16950:2016 Ductile iron pipes, fittings and accessories - Sanitary characteristics and test methods Trim. II 03.100.454 35.240.514

1542 CEN/TR 16957:2016 Bio-based products - Guidelines for Life Cycle Inventory (LCI) for the End-of-life phase Trim. II 03.100.298 35.240.358

1543 CWA 16960:2015 Batch-based Calculation of Sustainability Impact for Captured Fish Products Trim. II 67.120.30

1544 CEN/TS 16969:2016Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance

Trim. II 03.100.455 35.240.515

1545 CEN/TR 16970:2016 Sustainability of construction works - Guidance for the implementation of EN 15804 Trim. II 03.100.456 35.240.516

1546 CWA 16971:2015Global eBusiness Interoperability Test Bed (GITB) Phase 3: Implementation Specifications and Proof-of-Concept

Trim. II 35.240.01

1547 CWA 16975:2015 Eco-efficient Substations for District Heating Trim. II 27.010 27.015

1548CWA 16975:2015/AC:2016

Eco-efficient Substations for District Heating Trim. II 03.100.242 35.240.302

1549 CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol Trim. II 03.100.352 35.240.412

1550 CEN/TR 16978:2016 Railway applications - Infrastructure - Survey on isolated defects Trim. II 03.100.243 35.240.303 91.140.10

1551 CEN/TS 16981:2016 Photocatalysis - Glossary of terms Trim. II 03.100.45 35.240.105

1552 CEN/TR 16982:2016 Diesel blends and fuels - Cold filterability issues Trim. II 03.100.300 35.240.360

1553 CEN/TS 16986:2016Electronic Fee Collection - Interoperable application profiles for information exchange between Service Provision and Toll Charging

Trim. II 03.100.244 35.240.304

1554 CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test Trim. II 03.100.457 35.240.517

1555 EN ISO 16995:2015Solid biofuels - Determination of the water soluble chloride, sodium and potassium content (ISO 16995:2015)

Trim. II 27.190 75.160.40

1556 CEN/TR 16998:2016Ambient air - Report on nitro- and oxy-PAHs - Origin, toxicity, concentrations and measurement methods

Trim. II 03.100.48 35.240.108

Pagina 78 din 170





1557 CEN/TR 17004:2016Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities

Trim. II 03.100.245 35.240.305

1558 CEN/TR 17005:2016

Sustainability of construction works - Additional environmental impact categories and indicators - Background information and possibilities - Evaluation of the possibility of adding environmental impact categories and related indicators and calculation methods for the assessment of the environmental performance of buildings

Trim. II 03.100.246 35.240.306

1559CEN/CLC ISO/IEC/TS 17021-2:2016

Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems (ISO/IEC/TS 17021-2:2012)

SM SR ISO/CEI TS 17021-2:2014

Trim. II 03.100.474 35.240.534

1560CEN/CLC ISO/IEC/TS 17021-3:2016

Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013)

SM SR ISO/CEI TS 17021-3:2014

Trim. II 03.100.475 35.240.535

1561 CWA 17028-105:2016 Business Interoperability Interfaces for public procurement in Europe - Trim. II 03.100.635 35.240.695

1562 CWA 17029-120:2016 Business Interoperability Interfaces for Public Procurement in Europe - Trim. II 03.100.636 35.240.696



1565 CWA 17029-124:2016 Business Interoperability Interfaces for public procurement in Europe - Trim. II 03.100.639 35.240.699









1574 CWA 17044:2016 Aerospace series - Modules for Electro-Mechanical Actuators in Aircraft Trim. II 03.100.623 35.240.683

Pagina 79 din 170





1575 CWA 17046:2016 Humanitarian demining - Non-technical survey in the land release Trim. II 03.100.624 35.240.684

1576 CWA 17047:2016 Comminuted and fragmented poultry meat - Quantification of muscle Trim. II 03.100.622 35.240.682

1577 CWA 17056:2016 Safepost - Postal supply chain security - Standardization needs Trim. II 03.100.301 35.240.361

1578 CWA 17089:2016 Indicators for the sustainability assessment of roads Trim. II 03.100.50 35.240.110

1579 ISO 17240:2004Fruit and vegetable products -- Determination of tin content -- Method using flame atomic absorption spectrometry

SM GOST R ISO 17240:2012 Trim. II 67.080.01

1580 CEN ISO/TS 17251:2016Health Informatics - Business requirements for a syntax to exchange structured dose information for medicinal products (ISO/TS 17251:2016)

Trim. II 03.100.459 35.240.519

1581EN 1729-1:2015/AC:2016

Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions Trim. II 03.100.511 35.240.571

1582 EN 1741:1998Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure

Trim. II 91.100.30

1583 ISO 1742:1980 Glucose syrups -- Determination of dry matter -- Vacuum oven methodGOST 31045-2002 (ISO 1742:1980)

Trim. II 67.180.20

1584 EN 1744-7:2012Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)

Trim. II 91.100.15

1585 CEN/TR 1749:2014European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)

Trim. II 91.140.40

1586 CR 1752:1998 Ventilation for buildings - Design criteria for the indoor environment Trim. II 91.140.30

1587 EN 175500:1997Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval

Trim. II 29.120 31.220.10

1588 ISO 1762:2015 Paper, board and pulps -- Determination of residue (ash) on ignition at 525 degrees CGOST 18461-93 (ISO 1762-74)

Trim. II 85.040

1589 ISO 1768:1975Glass hydrometers -- Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)

GOST 28947-91 (ISO 1768-75)

Trim. II 17.060

1590 ISO 1775:1975 Porcelain laboratory apparatus -- Requirements and methods of testGOST 29225-91 (ISO 1775-75)

Trim. II 71.040.20

1591 EN 1779:1999/A1:2003 Non-destructive testing - Leak testing - Criteria for method and technique selection Trim. II 19.100

1592 EN ISO 17828:2015 Solid biofuels - Determination of bulk density (ISO 17828:2015) Trim. II 27.190 75.160.40

1593 EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015) Trim. II 27.190 75.160.40

1594 EN ISO 17831-1:2015Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)

Trim. II 27.190 75.160.40

1595 EN ISO 17831-2:2015Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes (ISO 17831-2:2015)

Trim. II 27.190 75.160.40

1596 EN 1793-4:2015Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction

Trim. II 17.140.30 93.080.30

Pagina 80 din 170





1597 EN 1793-6:2012Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions

Trim. II 17.140.30 93.080.30

1598 EN ISO 17962:2015Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems (ISO 17962:2015)

Trim. II 65.060.30

1599 EN ISO 17989-1:2015Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015)

Trim. II 65.060.01

1600 EN 181103:1997Blank Detail Specification: Fibre optic branching devices - Type: Non wavelength selective transmissive star for telecommunication application

Trim. II 33.180.20

1601 EN 181104:1997Blank Detail Specification: Fibre optic branching devices - Type: Wavelength selective transmissive star for telecommunication application

Trim. II 33.180.20

1602 EN ISO 18122:2015 Solid biofuels - Determination of ash content (ISO 18122:2015) Trim. II 27.190 75.160.40

1603 EN ISO 18123:2015 Solid biofuels - Determination of the content of volatile matter (ISO 18123:2015) Trim. II 27.190 75.160.40

1604 EN ISO 18134-1:2015Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method (ISO 18134-1:2015)

Trim. II 27.190 75.160.40

1605 EN ISO 18134-2:2015Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2015)

Trim. II 27.190 75.160.40

1606 EN ISO 18134-3:2015Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO 18134-3:2015)

Trim. II 27.190 75.160.40

1607 CR 1831:1995CIM Systems Architecture - Enterprise model execution and integration services - Evaluation report

Trim. II 35.240.50

1608 CR 1832:1995CIM Systems Architecture - Enterprise model execution and integration services - Statement of requirements

Trim. II 35.240.50

1609 ISO 18413:2015Hydraulic fluid power -- Cleanliness of components -- Inspection document and principles related to contaminant extraction and analysis, and data reporting

GOST ISO 18413-2006 Trim. II 23.100.60

1610 EN ISO 18563-1:2015Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2015)

Trim. II 19.100

1611 EN ISO 18563-3:2015Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Combined systems (ISO 18563-3:2015)

Trim. II 19.100

1612 EN 187103:2003 Family specification - Optical fibre cables for indoor applications Trim. II 33.180.20

1613 EN 187105:2002 Single mode optical cable (duct/direct buried installation) Trim. II 33.180.10

1614 EN 1906:2012 Building hardware - Lever handles and knob furniture - Requirements and test methods Trim. II 91.190

1615 EN 1922:1997 Information technology - Character repertoire and coding for interworking with Telex services Trim. II 35.040.99

1616 CEN/TS 1923:2003 European character repertoires and their coding - 8-bit single-byte coding Trim. II 35.040.10

1617 EN 1931:2000/AC:2001Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties

Trim. II 91.100.50

1618 EN 1932:2013External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria

Trim. II 91.060.50

1619 EN 1933:1998 Exterior blinds - Resistance to load due to water accumulation - Test method Trim. II 91.060.50

Pagina 81 din 170





1620 EN 1937:1999Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures

Trim. II 91.100.99

1621 EN ISO 1938-1:2015Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)

Trim. II 17.040.10

1622 ISO 1956-1:1982 Fruits and vegetables -- Morphological and structural terminologyGOST 27519-87 (ISO 1956/1-82)

Trim. II 67.080.10 01.040.67

1623EN ISO/IEC 19788-1:2012

Information technology - Learning, education and training - Metadata for learning resources - Part 1: Framework (ISO/IEC 19788-1:2011)

Trim. II 03.100.30 35.240.90

1624EN ISO/IEC 19788-2:2012

Information technology - Learning, education and training - Metadata for learning resources - Part 2: Dublin Core elements (ISO/IEC 19788-2:2011)

Trim. II 03.100.30 35.240.90

1625EN ISO/IEC 19788-3:2013

Information technology - Learning, education and training - Metadata for learning resources - Part 3: Basic application profile (ISO/IEC 19788-3:2011)

Trim. II 03.100.30 35.240.90

1626EN ISO/IEC 19788-5:2014

Information technology - Learning, education and training - Metadata for learning resources - Part 5: Educational elements (ISO/IEC 19788-5:2012)

Trim. II 03.100.30 35.240.90

1627 ISO/IEC 19794-4:2005 Information technology -- Biometric data interchange formats -- Part 4: Finger image dataSM GOST R ISO/CEI 19794-4:2007

Trim. II 35.240.15

1628 ISO/IEC 19794-7:2007Information technology -- Biometric data interchange formats -- Part 7: Signature/sign time series data

SM GOST R ISO/CEI 19794-7:2009

Trim. II 35.240.15

1629 ISO/IEC 19794-9:2007 Information technology -- Biometric data interchange formats -- Part 9: Vascular image dataSM GOST R ISO/CEI 19794-9:2009

Trim. II 35.240.15

1630EN ISO/IEC 19796-1:2009

Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005)

Trim. II 03.100.30 35.240.90

1631 ISO 1990-1:1982 Fruits -- Nomenclature -- First listGOST 27521-87 (ISO 1990/1-1982)

Trim. II 67.080.10 01.040.67

1632 ISO 1990-2:1985 Fruits -- Nomenclature -- Second listGOST 27522-87 (ISO 1990/2-1985)

Trim. II 67.080.10 01.040.67

1633EN 1991-1-3:2003/A1:2015

Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads Trim. II 91.010.30

1634EN 1991-1-6:2005/AC:2013

Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution Trim. II 91.010.30

1635EN 1991-1-7:2006/A1:2014

Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions Trim. II 91.010.30

1636EN 1991-1-7:2006/AC:2010

Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions Trim. II 91.010.30

1637EN 1991-3:2006/AC:2012

Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery Trim. II 91.010.30

1638EN 1992-1-1:2004/A1:2014

Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings Trim. II 91.010.30 91.080.40

1639EN 1992-1-2:2004/AC:2008

Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design Trim. II 91.010.30 91.080.10

1640EN 1992-2:2005/AC:2008

Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rules Trim. II 91.010.30 91.080.40

Pagina 82 din 170





1641EN 1993-1-1:2005/A1:2014

Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings Trim. II 91.010.30 91.080.13

1642EN 1993-1-1:2005/AC:2009

Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings Trim. II 91.010.30 91.080.13

1643EN 1993-1-10:2005/AC:2009

Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties

Trim. II 91.010.30 91.080.13 93.040

1644EN 1993-1-12:2007/AC:2009

Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700

Trim. II 91.010.30 91.080.13

1645EN 1993-1-4:2006/A1:2015

Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels

Trim. II 91.010.30 91.080.13

1646EN 1993-1-6:2007/AC:2009

Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures Trim. II 91.010.30 91.080.13

1647EN 1993-1-7:2007/AC:2009

Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading

Trim. II 91.010.30 91.080.13

1648EN 1993-1-8:2005/AC:2009

Eurocode 3: Design of steel structures - Part 1-8: Design of joints Trim. II 91.010.30 91.080.13

1649EN 1993-1-9:2005/AC:2009

Eurocode 3: Design of steel structures - Part 1-9: Fatigue Trim. II 91.010.30 91.080.13

1650EN 1993-4-1:2007/AC:2009

Eurocode 3 - Design of steel structures - Part 4-1: Silos Trim. II 65.040.20 91.010.30

1651EN 1994-2:2005/AC:2008

Eurocode 4 - Design of composite steel and concrete structures - Part 2: General rules and rules for bridges

Trim. II 91.010.30 91.080.13

1652EN 1995-1-1:2004/A1:2008

Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings

Trim. II 91.010.30 91.080.20

1653EN 1995-1-1:2004/A2:2014


Trim. II 91.010.30 91.080.20 91.080.13

1654EN 1995-1-1:2004/AC:2006


Trim. II 91.010.30 91.080.20 91.080.40 93.040

1655EN 1997-1:2004/A1:2013

Eurocode 7: Geotechnical design - Part 1: General rules Trim. II 91.010.30 93.020

1656EN 1999-1-1:2007/A2:2013

Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules Trim. II 91.010.30 91.080.17

1657 EN 200:2008Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification

Trim. II 91.140.70

1658 ISO 2027:1990 Natural rubber latex concentrate, evaporated, preserved -- SpecificationGOST 29082-91 (ISO 2027-90)

Trim. II 83.040.10

1659 ISO 2046:1973 Gaseous breathing oxygen supplies for aircraftGOST 5583-78 (ISO 2046-73)

Trim. II 49.100

1660 ISO 2120:1972Liquid chlorine for industrial use -- Determination of the content of chlorine by volume in the vaporized product

GOST 6718-93 (ISO 2120-72, ISO 2121-72)

Trim. II 71.060.10

1661 ISO 2121:1972 Liquid chlorine for industrial use -- Determination of water content -- Gravimetric methodGOST 6718-93 (ISO 2120-72, ISO 2121-72)

Trim. II 71.060.10

Pagina 83 din 170





1662EN ISO 21569:2005/A1:2013

Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Qualitative nucleic acid based methods - Amendment 1 (ISO 21569:2005/Amd 1:2013)

Trim. II 67.050

1663EN ISO 21570:2005/A1:2013

Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods (ISO 21570:2005/Amd 1:2013)

Trim. II 67.050

1664EN ISO 21570:2005/AC:2007

Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods (ISO 21570:2005/Cor.1:2006)

Trim. II 67.050

1665EN ISO 21571:2005/A1:2013

Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Nucleic acid extraction - Amendment 1 (ISO 21571:2005/Amd 1:2013)

Trim. II 67.050

1666 ISO 2166:1981 Carrots -- Guide to storageGOST 28275-94 (ISO 2166-81)

Trim. II 67.080.20

1667 ISO 21940-11:2016Mechanical vibration -- Rotor balancing -- Part 11: Procedures and tolerances for rotors with rigid behaviour

SM GOST ISO 1940-1:2008 Trim. II 21.120.40

1668 ISO 21940-12:2016Mechanical vibration -- Rotor balancing -- Part 12: Procedures and tolerances for rotors with flexible behaviour

SM GOST 31320:2008 (ISO 11342:1998)

Trim. II 21.120.40

1669EN ISO 22000:2005/AC:2006

Food safety management systems - Requirements for any organization in the food chain (ISO 22000:2005/Cor.1:2006)

Trim. II 03.100.70 67.020

1670EN ISO 22476-2:2005/A1:2011

Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing - Amendment 1 (ISO 22476-2:2005/Amd 1:2011)

Trim. II 93.020

1671EN ISO 22476-3:2005/A1:2011

Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1 (ISO 22476-3:2005/Amd 1:2011)

Trim. II 93.020

1672 EN 226:1987/AC1:1987 Atomizing oil burners - Connecting dimensions between burners and heat generators Trim. II 27.060.10

1673 EN ISO 22630:2015 Oilseed meals - Determination of oil content - Rapid extraction method (ISO 22630:2015) Trim. II 67.200.20

1674 ISO 22810:2010 Horology -- Water-resistant watchesGOST 29330-92 (ISO 2281-90)

Trim. II

1675 EN ISO 22870:2016 Point-of-care testing (POCT) - Requirements for quality and competence (ISO 22870:2016) SM SR EN ISO 22870:2013 Trim. II 03.100.59 35.240.119

1676 EN ISO 22975-3:2014Solar energy - Collector components and materials - Part 3: Absorber surface durability (ISO 22975-3:2014)

Trim. II 27.160

1677 EN 234:1989/AC:1997 Wallcoverings in roll form - Specification for wallcoverings for subsequent decoration Trim. II 91.180

Pagina 84 din 170





1678 ISO/IEC 2382:2015 Information technology -- Vocabulary

SM ISO/CEI 2382-5:2015, SM ISO/CEI 2382-4:2015, SM SR ISO/CEI 2382-20:2003, SM SR ISO/CEI 2382-1:2002, GOST 19781-90 (ISO 2382-7-77, ISO 2382-10-79)

Trim. II

1679 ISO 2402:1972Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers

GOST 1672-80 (ISO 521-75, ISO 2402-72)

Trim. II 25.100.30

1680EN ISO 24276:2006/A1:2013

Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - General requirements and definitions (ISO 24276:2006/Amd 1:2013)

Trim. II 67.050

1681EN ISO 24333:2009/AC:2010

Cereals and cereal products - Sampling (ISO 24333:2009) Trim. II 67.060

1682 ISO 2435:1973 Nitrogen for use in aircraftGOST 9293-74 (ISO 2435-73)

Trim. II 49.100

1683 CR 245:1986Thermal insulation - Classification of building materials according to their thermal insulation properties

Trim. II 91.100.99 91.120.10

1684 EN 246:2003 Sanitary tapware - General specifications for flow rate regulators Trim. III 91.140.70

1685 ISO 2461:1973 Sodium chlorate for industrial use -- Determination of matter insoluble in waterGOST 29208.1-91 (ISO 2461-73)

Trim. III 71.060.50

1686 ISO 2462:1973 Sodium chlorate for industrial use -- Determination of moisture content -- Gravimetric methodGOST 29208.2-91 (ISO 2462-73)

Trim. III 71.060.50

1687 ISO/IEC 24724:2011Information technology -- Automatic identification and data capture techniques -- GS1 DataBar bar code symbology specification

SM GOST ISO/CEI 24724:2012

Trim. III 35.040.50 01.080.50

1688 EN 248:2002 Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr Trim. III 91.140.70

1689 EN 249:2010Sanitary appliances - Shower trays made from crosslinked cast acrylic sheets - Requirements and test methods

Trim. III 91.140.70

1690 ISO 2493-1:2010 Paper and board -- Determination of bending resistance -- Part 1: Constant rate of deflection GOST ISO 2493-96 Trim. III 85.060

1691 EN ISO 25178-606:2015Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)

Trim. III 17.040.20

1692 ISO 2631-2:2003Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 2: Vibration in buildings (1 Hz to 80 Hz)

SM GOST 31191.2:2008 (ISO 2631-2:2003)

Trim. III 13.160

1693 ISO 2631-4:2001Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems

SM GOST 31191.4:2008 (ISO 2631-4:2001)

Trim. III 13.160

Pagina 85 din 170





1694 ISO 2631-5:2004Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 5: Method for evaluation of vibration containing multiple shocks

SM GOST 31191.5:2008 (ISO 2631-5:2004)

Trim. III 13.160

1695ISO/IEC/IEEE 26511:2011

Systems and software engineering -- Requirements for managers of user documentationGOST ISO/CEI TO 9294-2001

Trim. III 35.080

1696 ISO 2795:2014 Plain bearings -- Sintered bushes -- Dimensions and tolerances GOST ISO 2795-2001 Trim. III 21.100.10

1697 ISO 2857:1973Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches -- Manufacturing tolerances on the threaded portion

GOST 16925-93 (ISO 2857-73)

Trim. III 25.100.50

1698EN ISO 286-1:2010/AC:2013

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)

Trim. III 17.040.10

1699EN ISO 286-2:2010/AC:2013

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)

Trim. III 17.040.10

1700 EN 28701:2012Intelligent transport systems - Public transport - Identification of Fixed Objects in Public Transport (IFOPT)

Trim. III 35.240.60

1701 ISO 2876:1985 Packaging -- Complete, filled transport packages -- Rolling testGOST 25387-82 (ISO 2876-85, ISO 8768-86)

Trim. III 55.180.40

1702 EN 28768:1992 Packaging - Complete, filled transport packages - Toppling test (ISO 8768:1986) Trim. III 55.180.40

1703EN ISO 2922:2000/A1:2013

Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours - Amendment 1 (ISO 2922:2000/Amd 1:2013)

Trim. III 17.140.30

1704 EN 293:1992 Oil pressure atomizing nozzles - Minimum requirements - Testing Trim. III 27.060.10

1705 ISO 2940-1:1974Milling cutters mounted on centring arbors having a 7/24 taper -- Fitting dimensions -- Centring arbors

SM GOST 31050:2009 (ISO 2940-1:1974)

Trim. III 25.100.20

1706 EN 295-3:2012 Vitrified clay pipe systems for drains and sewers - Part 3: Test methods Trim. III 93.030

1707 ISO 2982-2:2013 Rolling bearings -- Accessories -- Part 2: Dimensions for locknuts and locking devicesGOST 8530-90 (ISO 2982-72, ISO 2983-75)

Trim. III 21.100.20

1708 EN 299:2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics Trim. III 27.060.10

1709 ISO 2993:1974 Ammonium sulphate for industrial use -- Determination of free acidity -- Titrimetric methodGOST 29336-92 (ISO 2993-74)

Trim. III 71.060.50

1710 ISO 3007:1999 Petroleum products and crude petroleum -- Determination of vapour pressure -- Reid methodGOST 1756-2000 (ISO 3007-99)

Trim. III 75.080

1711 EN 301549:2015Accessibility requirements suitable for public procurement of ICT products and services in Europe

Trim. III 33.030

1712 ISO 3019-2:2001Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series

SM GOST ISO 3019-2:2009 Trim. III 23.100.10

1713 ISO 302:2015 Pulps -- Determination of Kappa numberGOST 10070-74 (ISO 302-81)

Trim. III 85.040

Pagina 86 din 170





1714 EN 303-2:1998/A1:2003Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners

Trim. III 91.140.10

1715 ISO 3034:2011 Corrugated fibreboard -- Determination of single sheet thicknessGOST 22186-93 (ISO 3034-75)

Trim. III 85.080.30

1716 ISO 3037:2013 Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method)GOST 20683-97 (ISO 3037-94)

Trim. III 85.080.30

1717 ISO 3038:1975 Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersionGOST 30758-2001 (ISO 3038-75)

Trim. III 85.080.30

1718 EN 304:1992 Heating boilers - Test code for heating boilers for atomizing oil burners Trim. III 91.140.10

1719 EN 304:1992/A1:1998 Heating boilers - Test code for heating boilers for atomizing oil burners Trim. III 91.140.10

1720 EN 304:1992/A2:2003 Heating boilers - Test code for heating boilers for atomizing oil burners Trim. III 91.140.10

1721 ISO 3108:1974 Steel wire ropes for general purposes -- Determination of actual breaking loadGOST 3241-91 (ISO 3108-74)

Trim. III 77.140.65

1722 ISO 3195:1975Sodium hydroxide for industrial use -- Sampling -- Test Sample -- Preparation of the main solution for carrying out certain determinations

GOST 29287-92 (ISO 3195-75)

Trim. III 71.060.40

1723 ISO 3260:2015 Pulps -- Determination of chlorine consumption (Degree of delignification)GOST 29215-91 (ISO 3260-82)

Trim. III 85.040

1724 ISO 3270:1984Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing

GOST 29317-92 (ISO 3270-84)

Trim. III 87.060.01 87.040

1725 CEN/CLC Guide 34:2016 CEN and CENELEC representation in official meetings Trim. III 03.100.468 35.240.528

1726 ISO 3419:1981 Non-alloy and alloy steel butt-welding fittings

GOST 17375-2001 (ISO 3419-81), GOST 17376-2001 (ISO 3419-81), GOST 17378-2001 (ISO 3419-81), GOST 17379-2001 (ISO 3419-81), GOST 17380-2001 (ISO 3419-81), GOST 30753-2001 (ISO 3419-81)

Trim. III 23.040.40

1727 ISO 3425:1975Sulphur for industrial use -- Determination of ash at 850-900 degrees C and of residue at 200 degrees C

GOST 30355.2-96 (ISO 3425-75)

Trim. III 71.060.10

1728 ISO 3426:1975 Sulphur for industrial use -- Determination of loss in mass at 80 degrees CGOST 30355.3-96 (ISO 3426-75)

Trim. III 71.060.10

1729 ISO 3427:1976 Gaseous halogenated hydrocarbons (liquefied gases) -- Taking of a sampleGOST 29193-91 (ISO 3427-76)

Trim. III 71.080.20

1730 ISO 349:1975 Hard coal -- Audibert-Arnu dilatometer testGOST 13324-94 (ISO 349-75)

Trim. III 73.040

1731 ISO 3547-1:2006 Plain bearings -- Wrapped bushes -- Part 1: Dimensions SM GOST ISO 3547-1:2009 Trim. III 21.100.10

Pagina 87 din 170





1732 ISO 3547-2:2006 Plain bearings -- Wrapped bushes -- Part 2: Test data for outside and inside diameters SM GOST ISO 3547-2:2009 Trim. III 21.100.10

1733 ISO 3547-3:2006 Plain bearings -- Wrapped bushes -- Part 3: Lubrication holes, grooves and indentations SM GOST ISO 3547-3:2009 Trim. III 21.100.10

1734 ISO 3547-4:2006 Plain bearings -- Wrapped bushes -- Part 4: Materials SM GOST ISO 3547-4:2009 Trim. III 21.100.10

1735 ISO 3548-2:2009Plain bearings -- Thin-walled half bearings with or without flange -- Part 2: Measurement of wall thickness and flange thickness

GOST ISO 3548-2002 Trim. III 21.100.10

1736EN ISO 3650:1998/AC:2009

Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998/Cor 1:2008)

Trim. III 17.040.30

1737EN ISO 3691-2:2016/AC:2016

Industrial trucks - Safety requirements and verification - Part 2: Selfpropelled variable-reach trucks (ISO 3691-2:2016)

Trim. III 03.100.129 35.240.189

1738 ISO 3704:1976 Sulphur for industrial use -- Determination of acidity -- Titrimetric methodGOST 30355.4-96 (ISO 3704-76)

Trim. III 71.060.10

1739 ISO 3731:2003Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage

GOST 9200-2006 (ISO 1185:2003, ISO 1724:2003, ISO 3731:2003, ISO 3732:2003, ISO 4091:2003)

Trim. III 43.040.10

1740 ISO 3732:2003Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage


Trim. III 43.040.10

1741 ISO 3795:1989Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials

GOST 30879-2003 (ISO 3795:1989)

Trim. III 13.220.40 65.060.01

1742 EN ISO 3819:2015 Laboratory glassware - Beakers (ISO 3819:2015) Trim. III 17.060

1743 EN ISO 384:2015Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)

Trim. III 17.060

1744 ISO 386:1977 Liquid-in-glass laboratory thermometers -- Principles of design, construction and useGOST 29224-91 (ISO 386-77)

Trim. III 17.200.20 43.020

1745 ISO 3887:2003 Steels -- Determination of depth of decarburizationGOST 1763-68 (ISO 3887-77)

Trim. III 77.040.99

1746 ISO 3965:1990 Agricultural wheeled tractors -- Maximum speeds -- Method of determinationGOST 30748-2001 (ISO 3965-90)

Trim. III 65.060.10

1747EN ISO 3977-5:2003/AC:2007

Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)

Trim. III 27.040 75.180.20

1748 ISO 4009:2000Commercial vehicles -- Location of electrical and pneumatic connections between towing vehicles and trailers

GOST ISO 4009:2006 Trim. III 43.040.10

1749 ISO 4065:1996 Thermoplastics pipes -- Universal wall thickness table SM GOST ISO 4065:2010 Trim. III 23.040.20

Pagina 88 din 170





1750 EN 409:2009 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners Trim. III 91.080.20

1751 ISO 4091:2003Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Definitions, tests and requirements


Trim. III 43.040.10

1752 ISO 4101:1983 Drawn steel wire for elevator ropes -- SpecificationsGOST 29121-91 (ISO 4101-83)

Trim. III 91.140.90 77.140.65

1753 ISO 4116:1986Air cargo equipment -- Ground equipment requirements for compatibility with aircraft unit load devices

GOST ISO 4116-96 Trim. III 49.120 49.100

1754 ISO 4140:1979Ferrochromium and ferrosilicochromium -- Determination of chromium content -- Potentiometric method

GOST 13201.1-93 (ISO 4140-79)

Trim. III 77.100

1755 EN 415-4:1997/AC:2002 Safety of packaging machines - Part 4: Palletisers and depalletisers Trim. III 55.200

1756 ISO 4158:1978Ferrosilicon, ferrosilicomanganese and ferrosilicochromium -- Determination of silicon content -- Gravimetric method

GOST 16591.4-87 (ISO 4158-78)

Trim. III 77.100

1757 EN 419212-1:2014Application Interface for smart cards used as Secure Signature Creation Devices - Part 1: Basic services

Trim. III 35.240.15

1758 EN 419212-2:2014Application Interface for smart cards used as Secure Signature Creation Devices - Part 2: Additional services

Trim. III 35.240.15

1759 CEN/TS 419221-1:2016 Protection Profiles for TSP cryptographic modules - Part 1: Overview Trim. III 03.100.585 35.240.645

1760 CEN/TS 419221-2:2016Protection Profiles for TSP cryptographic modules - Part 2: Cryptographic module for CSP signing operations with backup

Trim. III 03.100.586 35.240.646

1761 CEN/TS 419221-3:2016Protection Profiles for TSP Cryptographic modules - Part 3: Cryptographic module for CSP key generation services

Trim. III 03.100.587 35.240.647

1762 CEN/TS 419221-4:2016Protection Profiles for TSP cryptographic modules - Part 4: Cryptographic module for CSP signing operations without backup

Trim. III 03.100.588 35.240.648

1763 CEN/TS 419261:2015 Security requirements for trustworthy systems managing certificates and time-stamps Trim. III 03.120.20 35.030

1764 ISO 4209-1:2001 Truck and bus tyres and rims (metric series) -- Part 1: Tyres GOST ISO 4209-1-2006 Trim. III 83.160.10

1765 ISO 4252:2007 Agricultural tractors -- Operator's workplace, access and exit -- DimensionsGOST ISO 4252-2005 (ISO 6880-83)

Trim. III 65.060.10

1766EN ISO 4287:1998/AC:2008

Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997/Cor 1:1998/Cor 2:2005)

Trim. III 17.040 17.040.20 35.240.30

1767 ISO 4379:1993 Plain bearings -- Copper alloy bushes SM GOST ISO 4379:2009 Trim. III 21.100.10

1768 ISO 4385:1981 Plain bearings -- Compression testing of metallic bearing materialsGOST 29204-91 (ISO 4385-81)

Trim. III 21.100.10

Pagina 89 din 170





1769 ISO 4386-3:1992 Plain bearings -- Metallic multilayer plain bearings -- Part 3: Non-destructive penetrant testing GOST ISO 4386-3-96 Trim. III 21.100.10

1770 ISO 4407:2002Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope

GOST ISO 4407-2006 Trim. III 23.100.60

1771 ISO 4415:1981 Size designation of clothes -- Men's and boys' underwear, nightwear and shirts GOST ISO 4415-2004 Trim. III 61.020

1772 ISO 4417:1977 Size designation of clothes -- HeadwearGOST ISO 4417-2002, GOST 28846-90 (ISO 4418-78)

Trim. III 61.020 61.040

1773 ISO 4418:1978 Size designation of clothes -- Gloves GOST ISO 4418-2002 Trim. III 61.020 61.040

1774 ISO 4437-3:2014 Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) -- Part 3: FittingsSM GOST R 50838:2012 (ISO 4437:2007)

Trim. III 83.140.30 75.200

1775 ISO 4470:1981 Sawn timber -- Determination of the average moisture content of a lotGOST 16588-91 (ISO 4470-81)

Trim. III 79.040

1776 ISO 4491-2:1997Metallic powders -- Determination of oxygen content by reduction methods -- Part 2: Loss of mass on hydrogen reduction (hydrogen loss)

SM GOST 18897:2011 (ISO 4491-2-97)

Trim. III 77.160

1777 ISO 4510-1:1987 Earth-moving machinery -- Service tools -- Part 1: Common maintenance and adjustment toolsGOST 28983-91 (ISO 4510-1-87)

Trim. III 53.100

1778 ISO 4551:1987 Ferroalloys -- Sampling and sieve analysisGOST 22310-93 (ISO 4551-87)

Trim. III 77.100

1779 EN 45544-4:2016Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance

SM SR EN 45544-4:2012 Trim. III 03.100.687 35.240.747

1780 ISO 4637:1979 Rubber-coated fabrics -- Determination of rubber-to-fabric adhesion -- Direct tension methodGOST 29063-91 (ISO 4637-79)

Trim. III 59.080.40

1781 ISO 4646:1989 Rubber- or plastics-coated fabrics -- Low-temperature impact testGOST 28788-90 (ISO 4646-89)

Trim. III 59.080.40

1782 ISO 4880:1997 Burning behaviour of textiles and textile products -- Vocabulary GOST ISO 4880-2002 Trim. III 13.220.40 01.040.59

1783 EN 492:2012+A1:2016 Fibre-cement slates and fittings - Product specification and test methods SM EN 492:2014 Trim. III 03.100.591 35.240.651

1784 ISO 4941:1994Steel and iron -- Determination of molybdenum content -- Thiocyanate spectrophotometric method

GOST 30964-2002 (ISO 4941:1994)

Trim. III 77.080.01 01.040.13

1785 ISO 4942:2016 Steels and irons -- Determination of vanadium content -- N-BPHA spectrophotometric methodGOST 12351-2003 (ISO 4942:1988, ISO 9647:1989)

Trim. III 77.080.01

1786 ISO 4948-1:1982Steels -- Classification -- Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition

GOST ISO 4948-1-2002 Trim. III 77.080.20

1787 EN 50065-7:2001Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance

Trim. III 33.040.30

1788 ISO 5007:2003Agricultural wheeled tractors -- Operator's seat -- Laboratory measurement of transmitted vibration

SM GOST 31316:2008 (ISO 5007:2003)

Trim. III 65.060.10 13.160

1789 EN 50075:1990Flat non-rewirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes

Trim. III 29.120.30

Pagina 90 din 170





1790 ISO 5008:2002Agricultural wheeled tractors and field machinery -- Measurement of whole-body vibration of the operator

SM GOST 31323:2008 (ISO 5008:2002)

Trim. III 13.160 65.060.01

1791 EN 50083-10:2002Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths

Trim. III 33.060.40

1792 CLC/TR 50083-10-1:2014Cable networks for television signals, sound signals and interactive services - Part 10-1: Guidelines for the implementation of return paths in cable networks

Trim. III 33.060.40

1793EN 50083-2:2012/A1:2015

Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment

Trim. III 33.060.40

1794 CLC/TR 50083-2-1:2014Cable networks for television signals, sound signals and interactive services - Part 2-1: Electromagnetic compatibility measurements

Trim. III 33.060.40

1795 CLC/TR 50083-2-2:2014Cable networks for television signals, sound signals and interactive services - Part 2-2: Interference issues for DVB-T reception in the presence of LTE base station signals

Trim. III 33.060.40 33.100.01

1796 CLC/TS 50083-3-3:2014Cable networks for television signals, sound signals and interactive services - Part 3-3: Active wideband equipment for cable networks - Methods of measurement of the maximum operating output level in the return path

Trim. III 33.060.40

1797 CLC/TR 50083-5-1:2009Cable networks for television signals, sound signals and interactive services - Part 5-1: IP gateways and interfaces for headends

Trim. III 33.060.40

1798 EN 50090-4-1:2004Home and Building Electronic Systems (HBES) - Part 4-1: Media independent layers - Application layer for HBES Class 1

Trim. III 35.100.70 97.120

1799 EN 50090-4-3:2015Home and Building Electronic Systems (HBES) - Part 4-3: Media independent layers - Communication over IP (EN 13321-2)

Trim. III 35.240.99 97.120

1800 EN 50094:1992 Access control system for the MAC/packet family: EUROCRYPT Trim. III 33.160.20

1801 EN 50094:1992/A1:1995 Access control system for the MAC/packet family: EUROCRYPT Trim. III 33.160.20

1802EN 50098-1:1998/A1:2002

Customer premises cabling for Information Technology - Part 1: ISDN basic access Trim. III 33.060.40 33.080

1803 EN 50098-2:1996Customer premises cabling for Information Technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface

Trim. III 33.080

1804 EN 501:1994Roofing products from metal sheet - Specification for fully supported roofing products of zinc sheet

Trim. III 91.060.20

1805 EN 50102:1995Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

Trim. III 29.020

1806 EN 50102:1995/A1:1998Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

Trim. III 29.020

1807 EN 50107-1:2002Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 1: General requirements

Trim. III 29.140.30

Pagina 91 din 170





1808EN 50107-1:2002/A1:2004

Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 1: General requirements

Trim. III 29.140.30

1809 EN 50107-2:2005Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 2: Requirements for earth-leakage and open-circuit protective devices

Trim. III 29.140.30

1810 CLC/TS 50131-12:2016Alarm systems - Intrusion and hold-up systems - Part 12: Methods and requirements for setting and unsetting of Intruder Alarm Systems (IAS)

Trim. III 03.100.258 35.240.318

1811EN 50131-2-7-1:2012/A2:2016

Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion Trim. III 03.100.672 35.240.732

1812EN 50131-2-7-2:2012/A2:2016


1813EN 50131-2-7-3:2012/A2:2016


1814 CLC/TS 50131-2-9:2016Alarm systems - Intrusion and hold-up systems - Part 2-9: Intrusion detectors - Active infrared beam detectors

Trim. III 03.100.370 35.240.430

1815 EN 50143:2009Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000 V but not exceeding 10 000 V

Trim. III 29.060.20

1816 EN 50152-3-2:2016Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Current transformers

SM SR EN 50152-3-2:2013 Trim. III 03.100.675 35.240.735

1817 EN 50152-3-3:2016Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Voltage transformers

SM SR EN 50152-3-3:2013 Trim. III 03.100.643 35.240.703

1818 EN 50157-1:1998Domestic and similar electronic equipment interconnection requirements: AV.link - Part 1: General

Trim. III 33.160.30 33.160.40

1819 EN 50157-2-2:1998Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-2: Basic system oriented commands

Trim. III 33.160.30 33.160.40

1820 EN 50157-2-3:1998Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-3: System oriented application

Trim. III 33.160.30 33.160.40

1821 EN 50160:2010/A1:2015 Voltage characteristics of electricity supplied by public electricity networks Trim. III 29.020

1822 EN 50173-2:2007 Information technology - Generic cabling systems - Part 2: Office premises Trim. III 33.040.50

1823EN 50173-2:2007/A1:2010

Information technology - Generic cabling systems - Part 2: Office premises Trim. III 33.040.50

1824 EN 50173-3:2007 Information technology - Generic cabling systems - Part 3: Industrial premises Trim. III 35.110

1825EN 50173-3:2007/A1:2010

Information technology - Generic cabling systems - Part 3: Industrial premises Trim. III 35.110

1826EN 50173-4:2007/A1:2010

Information technology - Generic cabling systems - Part 4: Homes Trim. III 33.040.50

Pagina 92 din 170





1827EN 50173-4:2007/A2:2012

Information technology - Generic cabling systems - Part 4: Homes Trim. III 33.040.50

1828 EN 50173-5:2007 Information technology - Generic cabling systems - Part 5: Data centres Trim. III 33.040.50

1829EN 50173-5:2007/A1:2010

Information technology - Generic cabling systems - Part 5: Data centres Trim. III 33.040.50

1830EN 50173-5:2007/A2:2012

Information technology - Generic cabling systems - Part 5: Data centres Trim. III 33.040.50

1831 EN 50173-6:2013 Information technology - Generic cabling systems - Part 6: Distributed building services Trim. III 35.110

1832 CLC/TR 50173-99-1:2007 Cabling guidelines in support of 10 GBASE-T Trim. III 35.110

1833 CLC/TR 50173-99-2:2010Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4

Trim. III 35.110

1834 CLC/TR 50173-99-3:2012Information technology - Generic cabling systems - Part 99-3: Home cabling infrastructures up to 50 m in length to support simultaneous and non simultaneous provision of applications

Trim. III 35.110

1835 CLC/TR 50174-99-1:2015 Information technology - Cabling installation - Part 99-1: Remote powering Trim. III 35.110

1836 ISO 5018:1983 Refractory materials -- Determination of true densityGOST 2211-65 (ISO 5018-83)

Trim. III 81.080

1837 EN 50180-1:2015Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements for bushings

SM SR EN 50180:2014 Trim. III 29.080.20

1838 EN 50180-2:2015Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components

Trim. III 29.080.20

1839 EN 50180-3:2015Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations

Trim. III 29.080.20

1840 EN 50186-1:1998Live-line washing systems for power installations with nominal voltages above 1kV - Part 1: Common requirements

Trim. III 29.260.10

1841 EN 50186-2:1998Live-line washing systems for power installations with nominal voltages above 1kV - Part 2: National annexes

Trim. III 29.260.10

1842 EN 50187:1996Gas-filled compartments for a.c. switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

Trim. III 29.130.20 29.260

1843 ISO 5019-1:1984 Refractory bricks -- Dimensions -- Part 1: Rectangular bricksGOST 8691-73 (ISO 5019-1-84, ISO 5019-2-84, ISO 50-19-5-84 )

Trim. III 81.080

1844 EN 50191:2010 Erection and operation of electrical test equipment Trim. III 17.220.20 19.080

1845 ISO 5019-2:1984 Refractory bricks -- Dimensions -- Part 2: Arch bricksGOST 8691-73 (ISO 5019-1-84, ISO 5019-2-84, ISO 50-19-5-84 )

Trim. III 81.080

1846 EN 50193-1:2013 Electric instantaneous water heaters - Part 1: General requirements Trim. III 91.140.65

1847 EN 50193-1:2016Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements

Trim. III 03.100.602 35.240.662 29.020

Pagina 93 din 170





1848 EN 50193-2-1:2016Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters

Trim. III 03.100.680 35.240.740

1849EN 50194-2:2006/A1:2016

Electrical apparatus for the detection of combustible gases in domestic Trim. III 03.100.644 35.240.704

1850 ISO 5019-5:1984 Refractory bricks -- Dimensions -- Part 5: SkewbacksGOST 8691-73 (ISO 5019-1-84, ISO 5019-2-84, ISO 50-19-5-84 )

Trim. III 81.080

1851 EN 50195:1996 Code of practice for the safe use of fully enclosed askarel-filled electrical equipment Trim. III 29.180

1852 ISO 502:2015 Coal -- Determination of caking power -- Gray-King coke testGOST 16126-91 (ISO 502:1982)

Trim. III 73.040

1853 EN 50201:2001 Interfaces for DVB-IRD Trim. III 33.160.20

1854 EN 50203:1996 Automatic channel installation (ACI) Trim. III 33.160.20

1855 EN 50203:1996/A1:1997 Automatic channel installation (ACI) Trim. III 33.160.20

1856 EN 50205:2002 Relays with forcibly guided (mechanically linked) contacts Trim. III 29.120.70

1857 EN 50212:1996 Connectors for thermoelectric sensors Trim. III 17.200.20

1858 EN 50216-1:2002 Power transformer and reactor fittings - Part 1: General Trim. III 29.180

1859 EN 50216-10:2009 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers Trim. III 29.180

1860 EN 50216-11:2008 Power transformer and reactor fittings - Part 11: Oil and winding temperature indicators Trim. III 29.180

1861 EN 50216-12:2011 Power transformer and reactor fittings - Part 12: Fans Trim. III 29.180

1862 EN 50216-2:2002Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator

Trim. III 29.120.70 29.180

1863EN 50216-2:2002/A1:2002

Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator

Trim. III 29.120.70 29.180

1864 EN 50216-3:2002Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion

Trim. III 29.180

1865EN 50216-3:2002/A2:2006

Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion

Trim. III 29.180

1866 EN 50216-4:2002Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)

Trim. III 29.180

1867 EN 50216-4:2015Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)

Trim. III 29.180

1868 EN 50216-5:2002Power transformer and reactor fittings - Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers

Trim. III 29.180

1869EN 50216-5:2002/A2:2005

Power transformer and reactor fittings - Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers

Trim. III 29.180

Pagina 94 din 170





1870EN 50216-5:2002/A3:2006

Power transformer and reactor fittings - Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers

Trim. III 29.180

1871 EN 50216-6:2002Power transformer and reactor fittings - Part 6: Cooling equipment - Removable radiators for oil-immersed transformers

Trim. III 29.180

1872 EN 50216-7:2002 Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil Trim. III 29.180

1873 EN 50216-9:2009 Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers Trim. III 29.180

1874 EN 50225:1996Code of practice for the safe use of fully enclosed oil-filled electrical equipment which may be contaminated with PCBs

Trim. III 29.180

1875CLC/TS 50238-2:2015/AC:2016-07

Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits

Trim. III 03.100.603 35.240.663

1876 EN 50242:2016 Electric dishwashers for household use - Methods for measuring the performanceSM SR EN 50242:2012 SM SR EN 50242:2012/A11:2016

Trim. III 03.100.604 35.240.664

1877 EN 50243:2002 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers Trim. III 29.080.20 29.180

1878 EN 50244:2016Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance

SM SR EN 50244:2012 Trim. III 03.100.681 35.240.741

1879 EN 50248:2001 Characteristics of DAB receivers Trim. III 33.160.20

1880 EN 50249:2002 Electromagnetic locators for buried pipes and cables - Performance and safety Trim. III 17.220.20

1881 EN 50256:1998 Characteristics of DVB receivers Trim. III 33.160.20

1882 EN 50270:2015/AC-08Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

Trim. III 03.100.483 35.240.543

1883 EN 50272-4:2007Safety requirements for secondary batteries and battery installations - Part 4: Batteries for use in portable appliances

Trim. III 29.220.20

1884 EN 50290-2-20:2016 Communication cables - Part 2-20: Common design rules and construction - General SM SR EN 50290-2-20:2011 Trim. III 03.100.313 35.240.373

1885 EN 50290-2-29:2016Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables

SM SR EN 50290-2-29:2011 Trim. III 03.100.372 35.240.432

1886 EN 50299-1:2014Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations

Trim. III 29.180

1887 EN 50299-2:2014Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations

Trim. III 29.180

1888 EN 50310:2016 Telecommunications bonding networks for buildings and other structures Trim. III 29.120.50 91.140.50

1889EN 50341-1:2001/A1:2009

Overhead electrical lines exceeding AC 45 kV - Part 1: General requirements - Common specifications

Trim. III 29.240.20

1890 EN 50341-2:2001 Overhead electrical lines exceeding AC 45 kV - Part 2: Index of National Normative Aspects Trim. III 29.240.20

Pagina 95 din 170





1891 EN 50341-2-19:2015Overhead electrical lines exceeding AC 1 kV - Part 2-19: National Normative Aspects (NNA) for CZECH REPUBLIC (based on EN 50341-1:2012)

Trim. III 29.240.20

1892 EN 50341-2-20:2015Overhead electrical lines exceeding AC 1 kV - Part 2-20: National Normative Aspects (NNA) for ESTONIA (based on EN 50341-1:2012)

Trim. III 29.240.20

1893 EN 50341-2-7:2015Overhead electrical lines exceeding AC 1 kV - Part -2-7: National Normative Aspects (NNA) for FINLAND (based on EN 50341-1:2012)

Trim. III 29.240.20

1894 EN 50341-2-9:2015Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012)

Trim. III 29.240.20

1895 EN 50342-1:2015 Lead-acid starter batteries - Part 1: General requirements and methods of test Trim. III 29.220.20

1896 EN 50342-3:2008 Lead-acid starter batteries - Part 3: Terminal system for batteries with 36 V nominal voltage Trim. III 29.220.20

1897 EN 50342-4:2009 Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles Trim. III 29.220.20

1898 EN 50342-5:2010 Lead-acid starter batteries - Part 5: Properties of battery housings and handles Trim. III 29.220.20

1899 EN 50342-6:2015 Lead-acid starter batteries - Part 6: Batteries for Micro-Cycle Applications Trim. III 29.220.20

1900 EN 50342-7:2015Lead acid starter batteries - Part 7: General requirements and methods of tests for motorcycle batteries

Trim. III 29.220.20

1901 EN 50353:2001Insulating oil - Determination of fibre contamination by the counting method using a microscope

Trim. III 29.040.20

1902 EN 50367:2012/A1:2016Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access)

Trim. III 03.100.486 35.240.546

1903 CLC/TR 50373:2004 Wind turbines - Electromagnetic compatibility Trim. III 27.180 33.100.01

1904 EN 50375:2002 Testing methodology for wipers used in electrical insulating oil Trim. III 29.040.10

1905 CLC/TR 50378-2-1:2008Passive components to be used in optical fibre communication systems - Product specifications - Part 2-1: SC(SC2)-PC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre

Trim. III 33.180.20

1906 CLC/TR 50378-2-2:2008Passive components to be used in optical fibre communication systems - Product specifications - Part 2-2: SC(SC2)-APC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre

Trim. III 33.180.20

1907 EN 50384:2002

Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110 MHz - 40 GHz) - Occupational

Trim. III 17.220.20 33.070.01

1908 EN 50386:2010/A1:2013 Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers Trim. III 29.180

1909 EN 50393:2015Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV

SM SR EN 50393:2013 Trim. III 29.120.20

Pagina 96 din 170





1910 EN 50397-2:2009Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria

Trim. III 29.240.20

1911 EN 50397-3:2010Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. - Part 3: Guide to use

Trim. III 29.240.20

1912 EN 50399:2011Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results

Trim. III 13.220.40 29.060.20

1913 EN 50399:2011/A1:2016 Common test methods for cables under fire conditions - Heat release Trim. III 13.220.40 29.060.20

1914 EN 504:1999Roofing products from metal sheet - Specification for fully supported roofing products of copper sheet

Trim. III 91.060.20

1915 CLC/TR 50412-1:2007Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 1: General

Trim. III 33.100.20

1916 EN 50413:2008/A1:2013Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)

Trim. III 17.220.20 33.100.01

1917 CLC/TR 50417:2016Safety of household and similar electrical appliances - Interpretations related to European Standards in the EN 60335 series

SM CLC/TR 50417:2015 Trim. III 03.100.373 35.240.433

1918 CLC/TR 50422:2013 Guide for the application of the European Standard EN 50160 Trim. III 29.020

1919 CLC/TS 50429:2005Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers

Trim. III 33.180.10

1920 CLC/TS 50430:2005Optical fibre cables - Gas pipe cables - Family specification for cables to be installed in high pressure gas pipes

Trim. III 33.180.10

1921 CLC/TS 50431:2005Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes

Trim. III 33.180.10

1922 EN 50438:2007/IS1:2015Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks

Trim. III 29.160.20

1923 EN 50438:2013/IS1:2015Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks

Trim. III 29.160.20

1924 EN 50440:2015 Efficiency of domestic electrical storage water heaters and testing methods Trim. III 91.140.65

1925 EN 50446:2006 Straight thermocouple assembly with metal or ceramic protection tube and accessories Trim. III 17.200.20

1926 CLC/TR 50450:2006 Resistibility requirements for equipment having (a) telecommunication port(s) Trim. III 33.040.40 33.100.01

1927 CLC/TR 50453:2007 Evaluation of electromagnetic fields around power transformers Trim. III 29.020 29.180

1928 CLC/TS 50458:2006 Capacitance graded outdoor bushing 52 kV up to 420 kV for oil immersed transformers Trim. III 29.080.20

Pagina 97 din 170





1929 CLC/TR 50460:2005Cable networks for television signals, sound signals and interactive services - System guidelines for analogue optical transmission systems

Trim. III 33.060.40

1930 EN 50461:2006 Solar cells - Datasheet information and product data for crystalline silicon solar cells Trim. III 27.160

1931 CLC/TR 50462:2008Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors

Trim. III 29.180

1932EN 50464-1:2007/A1:2012

Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements

Trim. III 29.180

1933EN 50464-4:2007/A1:2011

Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 4: Requirements and tests concerning pressurised corrugated tanks

Trim. III 29.180

1934 EN 50465:2015Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW

Trim. III 27.070 97.100.20

1935 EN 50468:2009Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports

Trim. III 29.120.50 91.120.40

1936 CLC/TR 50473:2007Recommendations for dimensional co-ordination between enclosures and built-in devices for rail fixing for household and similar installations

Trim. III 29.060.10

1937 CLC/TR 50480:2011 Determination of cross-sectional area of conductors and selection of protective devices Trim. III 29.060.01 29.140.50

1938 EN 50483-1:2009 Test requirements for low voltage aerial bundled cable accessories - Part 1: Generalities Trim. III 29.240.20

1939 EN 50483-3:2009Test requirements for low voltage aerial bundled cable accessories - Part 3: Tension and suspension clamps for neutral messenger system

Trim. III 29.240.20

1940 EN 50483-4:2009 Test requirements for low voltage aerial bundled cable accessories - Part 4: Connectors Trim. III 29.240.20

1941 EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test Trim. III 29.240.20

1942 EN 50483-6:2009Test requirements for low voltage aerial bundled cable accessories - Part 6: Environmental testing

Trim. III 29.240.20

1943 CLC/TR 50484:2009 Recommendations for shielded enclosures Trim. III 17.220.01 31.240

1944 CLC/TR 50485:2010 Electromagnetic compatibility - Emission measurements in fully anechoic chambers Trim. III 33.100.10

1945 CLC/TR 50503:2010Guidelines for the inventory control, management, decontamination and/or disposal of electrical equipment and insulating liquids containing PCBs

Trim. III 29.040.10

1946 CLC/TS 50509:2007 Use of LED signal heads in road traffic signal systems Trim. III 93.080.30

1947 CLC/TR 50510:2012 Fibre optic access to end-user - A guideline to building of FTTX fibre optic network Trim. III 33.180.99

1948 EN 50513:2009Solar wafers - Data sheet and product information for crystalline silicon wafers for solar cell manufacturing

Trim. III 27.160

1949 EN 50521:2008 Connectors for photovoltaic systems - Safety requirements and tests Trim. III 29.120.30

Pagina 98 din 170





1950 EN 50521:2008/A1:2012 Connectors for photovoltaic systems - Safety requirements and tests Trim. III 29.120.30

1951 EN 50524:2009 Data sheet and name plate for photovoltaic inverters Trim. III 27.160

1952 EN 50530:2010 Overall efficiency of grid connected photovoltaic inverters Trim. III 27.160

1953 EN 50530:2010/A1:2013 Overall efficiency of grid connected photovoltaic inverters Trim. III 27.160

1954 EN 50532:2010 Compact Equipment Assembly for Distribution Substations (CEADS) Trim. III 29.130.10

1955 CLC/TR 50538:2010 Guide to EMC Directive conformity of equipment designed for military purposes Trim. III 33.100.01

1956 CLC/TS 50539-12:2013Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 12: Selection and application principles - SPDs connected to photovoltaic installations

Trim. III 29.120.50

1957 CLC/TS 50539-22:2010Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 22: Selection and application principles - Wind turbine applications

Trim. III 29.120.50

1958 EN 50540:2010 Conductors for overhead lines - Aluminium Conductors Steel Supported (ACSS) Trim. III 29.240.20

1959 EN 50541-1:2011Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements

Trim. III 29.180

1960 CLC/TS 50544:2010Low voltage d.c. surge protective device for traction systems - Selection and application rules for surge arresters

Trim. III 29.120.50 29.280

1961 EN 50548:2011 Junction boxes for photovoltaic modules Trim. III 27.160

1962 EN 50548:2011/A1:2013 Junction boxes for photovoltaic modules Trim. III 27.160

1963 EN 50548:2011/A2:2014 Junction boxes for photovoltaic modules Trim. III 27.160

1964 CLC/TS 50549-1:2015Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network above 16 A

Trim. III 29.160.20

1965 CLC/TS 50549-2:2015Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network

Trim. III 29.160.20

1966 CLC/TR 50555:2010 Interruption indexes Trim. III 27.010 29.240.01

1967 CLC/TS 50560:2014 Interoperability framework requirement specification Trim. III 35.240.99 97.120

1968 EN 50566:2013/AC:2014Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz)

Trim. III 17.240 33.070.01

Pagina 99 din 170





1969 CLC/TS 50568-4:2015Electricity metering data exchange - Part 4: Lower layer PLC profile using SMITP B-PSK modulation

Trim. III 35.240.60 91.140.50

1970 CLC/TS 50568-8:2015

Electricity metering data exchange - The DLMS/COSEM suite - Part 8: SMITP B-PSK PLC communication profile for neighbourhood networks - Including: The Original-SMITP PLC B-PSK communication profile, The Original-SMITP Local data exchange profile and The Original-SMITP IP communication profile

Trim. III 35.240.60 91.140.50


Functional Reference Architecture for Communications in Smart Metering Systems Trim. III 33.200 35.100.70

1972 CLC/TR 50579:2012Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz

Trim. III 91.140.50

1973 EN 50582:2016Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing

Trim. III 03.100.487 35.240.547

1974EN 50588-1:2015/A1:2016

Medium power transformers 50 Hz, with highest voltage for equipment Trim. III 03.100.646 35.240.706

1975 CLC/TS 50590:2015Electricity metering data exchange - Lower layer PLC profile using Adaptive Multi Carrier Spread-Spectrum (AMC-SS) modulation

Trim. III 35.240.60 91.140.50

1976 EN 50592:2016Railway applications - Testing of rolling stock for electromagnetic compatibility with axle counters

Trim. III 03.100.314 35.240.374

1977 EN 50597:2015 Energy Consumption of Vending Machines Trim. III 27.010 55.230

1978 EN 50598-1:2014Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic model (SAM)

Trim. III 29.160.30

1979 EN 50598-2:2014Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor starters

Trim. III 29.160.30

1980EN 50598-2:2014/A1:2016

Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor starters

Trim. III 03.100.488 35.240.548 97.040.30

1981 EN 50604-1:2016Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods

Trim. III 03.100.489 35.240.549

1982 EN 50607:2015 Satellite signal distribution over a single coaxial cable - Second generation Trim. III 33.060.40

1983 CLC/TR 50607-10:2015 Satellite signal distribution over a single coaxial cable - Part 10: Implementation guideline Trim. III 33.060.40

1984 CLC/TR 50608:2013 Smart grid projects in Europe Trim. III 27.010 29.240.01

1985 CLC/TR 50609:2014 Technical Guidelines for Radial HVDC Networks Trim. III 29.240.01

1986 CLC/TS 50612:2016Portable electrical apparatus for the measurement of combustion flue gas parameters - Guide to their use in the process of commissioning, servicing and maintaining gas fired appliances

Trim. III 03.100.605 35.240.665

1987 CLC/TR 50619:2014 Guidance on how to conduct Round Robin Tests Trim. III 03.120.20 19.020

Pagina 100 din 170





1988 CLC/TR 50627:2015Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz

Trim. III 33.100.01

1989 EN 50628:2016 Erection of electrical installations in underground mines Trim. III 03.100.606 35.240.666

1990 EN 50629:2015/A1:2016 Energy performance of large power transformers (Um > 36 kV or Sr ≥ 40 Trim. III 03.100.647 35.240.707

1991 EN 50632-2-11:2016Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws

Trim. III 03.100.610 35.240.670

1992 EN 50632-2-14:2016Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers

Trim. III 03.100.611 35.240.671

1993 EN 50632-2-17:2016Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular requirements for routers and trimmers

Trim. III 03.100.612 35.240.672

1994 EN 50632-2-19:2016Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers

Trim. III 03.100.613 35.240.673

1995 EN 50632-2-3:2016Electric motor-operated tools - Dust measurement procedure - Part 2-3: Particular requirements for concrete grinders and disk-type sanders

Trim. III 03.100.607 35.240.667

1996 EN 50632-2-4:2016Electric motor-operated tools - Dust measurement procedure - Part 2-4: Particular requirements for sanders other than disk type

Trim. III 03.100.608 35.240.668

1997 EN 50632-2-5:2016Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws

Trim. III 03.100.609 35.240.669

1998 EN 50632-3-1:2016Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular requirements for transportable table saws

Trim. III 03.100.614 35.240.674

1999 EN 50632-3-9:2016Electric motor-operated tools - Dust measurement procedure - Part 3-9: Particular requirements for transportable mitre saws

Trim. III 03.100.374 35.240.434

2000 EN 50633:2016Railway applications - Fixed installations - Protection principles for AC and DC electric traction systems

Trim. III 03.100.490 35.240.550

2001 EN 507:1999Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet

Trim. III 91.060.20

2002 ISO 510:1977 Red lead for paintsGOST 19151-73 (ISO 510-77)

Trim. III 87.060.10

2003 CLC/TS 52056-8-4:2015Electricity metering data exchange - The DLMS/COSEM suite - Part 8-4: Narrow-band OFDM PRIME PLC communication profile for neighbourhood networks

Trim. III 35.240.60 91.140.50

2004 CLC/TS 52056-8-5:2015Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks

Trim. III 35.240.60 91.140.50

2005 CLC/TS 52056-8-7:2015Electricity metering data exchange - The DLMS/COSEM suite - Part 8-7: AMC-SS PLC communication profile for neighbourhood networks

Trim. III 35.240.60 91.140.50

2006 EN ISO 5223:2015 Test sieves for cereals (ISO 5223:1995, including Amendment 1:1999) Trim. III 67.260

2007 ISO 5348:1998 Mechanical vibration and shock -- Mechanical mounting of accelerometers GOST ISO 5348-2002 Trim. III 17.160

2008 EN ISO 5361:2016 Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016)SM EN ISO 5361:2014 SM EN ISO 5361:2014/AC:2015

Trim. III 03.100.268 35.240.328

Pagina 101 din 170





2009 EN ISO 5364:2016 Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2016) SM EN ISO 5364:2016 Trim. III 03.100.269 35.240.329

2010 ISO 5445:1980 Ferrosilicon -- Specification and conditions of deliverySM GOST 1415:2012 (ISO 5445:1980)

Trim. III 77.100

2011 EN 55011:2016Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

SM SR EN 55011:2011 Trim. III 03.100.676 35.240.736

2012EN 55013:2013/ A1:2016

Sound and television broadcast receivers and associated equipment -Radio disturbance characteristics - Limits and methods of measurement

Trim. III 03.100.677 35.240.737

2013EN 55016-1-3:2006/A1:2016

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

Trim. III 03.100.667 35.240.727

2014EN 55020:2007/A12:2016

Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement

Trim. III 03.100.684 35.240.744

2015EN 55032:2015/AC:2016-07

Electromagnetic compatibility of multimedia equipment - Emission Requirements Trim. III 03.100.615 35.240.675

2016EN ISO 5534:2004/AC:2013

Cheese and processed cheese - Determination of the total solids content (Reference method) - Technical Corrigendum 1 (ISO 5534:2004/Cor 1:2013)

Trim. III 67.100.30

2017EN ISO 5555:2001/A1:2014

Animal and vegetable fats and oils - Sampling - Amendment 1: Flexitanks (ISO 5555:2001/Amd 1:2014)

Trim. III 67.200.10

2018 ISO 5626:1993 Paper -- Determination of folding endurance GOST ISO 5626-97 Trim. III 85.060

2019 ISO 5627:1995 Paper and board -- Determination of smoothness (Bekk method)GOST 12795-89 (ISO 5627-84)

Trim. III 85.060

2020 ISO 5628:2012Paper and board -- Determination of bending stiffness -- General principles for two-point, three-point and four-point methods

GOST 30435-96 (ISO 5628-90)

Trim. III 85.060

2021 ISO 5629:1983 Paper and board -- Determination of bending stiffness -- Resonance methodGOST 30271-96 (ISO 5629-83)

Trim. III 85.060

2022 ISO 5633:1983 Paper and board -- Determination of resistance to water penetrationGOST 9841-94 (ISO 5633-84)

Trim. III 85.060

2023 ISO 5682-1:1996 Equipment for crop protection -- Spraying equipment -- Part 1: Test methods for sprayer nozzles GOST ISO 5682-1-2004 Trim. III 65.060.40

2024 ISO 5682-2:1997Equipment for crop protection -- Spraying equipment -- Part 2: Test methods for hydraulic sprayers

GOST ISO 5682-2-2004 Trim. III 65.060.40

2025 ISO 5682-3:1996Equipment for crop protection -- Spraying equipment -- Part 3: Test method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers

GOST ISO 5682-3-2004 Trim. III 65.060.40

2026 EN 581-2:2015/AC:2016Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating

Trim. III 03.100.592 35.240.652

2027 ISO 587:1997 Solid mineral fuels -- Determination of chlorine using Eschka mixtureGOST 9326-2002 (ISO 587-97)

Trim. III 75.160.10

Pagina 102 din 170





2028 EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels Trim. III 91.060.10 91.080.20

2029 ISO 5970:1979 Furniture -- Chairs and tables for educational institutions -- Functional sizes

GOST 11015-93 (ISO 5970-79), GOST 11016-93 (ISO 5970-79), GOST 18314-93 (ISO 5970-79), GOST 19549-93 (ISO 5970-79), GOST 19550-93 (ISO 5970-79), GOST 22359-93 (ISO 5970-79), GOST 5994-93 (ISO 5970-79), SM GOST 18313:2009 (ISO 5970-79)

Trim. III 97.140

2030 ISO 5979:1982 Rubber or plastics coated fabrics -- Determination of flexibility -- Flat loop methodGOST 28790-90 (ISO 5979-82)

Trim. III 59.080.40

2031EN ISO 5983-1:2005/AC:2009

Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method (ISO 5983-1:2005/Cor 1:2008)

Trim. III 65.120

2032 EN 60034-18-21:2013Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification

SM SR EN 60034-18-21+A1+A2:2013

Trim. III 29.160

2033EN 60034-26:2006/AC:2014

Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

Trim. III 29.160

2034 EN 60044-3:2003 Instrument transformers - Part 3: Combined transformers Trim. III 17.220.20 29.180

2035 EN 60059:1999/A1:2009 IEC standard current ratings Trim. III 29.020

2036EN 60061-1:1993/A1:1995

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

Trim. III 29.140.10

2037EN 60061-1:1993/A2:1995


Trim. III 29.140.10

2038EN 60061-1:1993/A21:1998


Trim. III 29.140.10

2039EN 60061-1:1993/A22:1999


Trim. III 29.140.10

2040EN 60061-1:1993/A23:1999


Trim. III 29.140.10

2041EN 60061-1:1993/A24:2000


Trim. III 29.140.10

2042EN 60061-1:1993/A25:2001


Trim. III 29.140.10

Pagina 103 din 170





2043EN 60061-1:1993/A26:2001


Trim. III 29.140.10

2044EN 60061-1:1993/A27:2001


Trim. III 29.140.10

2045EN 60061-1:1993/A27:2014


Trim. III 29.140.10

2046EN 60061-1:1993/A28:2002


Trim. III 29.140.10

2047EN 60061-1:1993/A29:2002


Trim. III 29.140.10

2048EN 60061-1:1993/A3:1995


Trim. III 29.140.10

2049EN 60061-1:1993/A30:2002


Trim. III 29.140.10

2050EN 60061-1:1993/A31:2003


Trim. III 29.140.10

2051EN 60061-1:1993/A32:2003


Trim. III 29.140.10

2052EN 60061-1:1993/A33:2003


Trim. III 29.140.10

2053EN 60061-1:1993/A34:2004


Trim. III 29.140.10

2054EN 60061-1:1993/A35:2005


Trim. III 29.140.10

2055EN 60061-1:1993/A36:2005


Trim. III 29.140.10

2056EN 60061-1:1993/A37:2006


Trim. III 29.140.10

2057EN 60061-1:1993/A38:2007


Trim. III 29.140.10

2058EN 60061-1:1993/A39:2007


Trim. III 29.140.10

2059EN 60061-1:1993/A4:1996


Trim. III 29.140.10

2060EN 60061-1:1993/A40:2008


Trim. III 29.140.10

2061EN 60061-1:1993/A41:2009


Trim. III 29.140.10

2062EN 60061-1:1993/A42:2009


Trim. III 29.140.10

2063EN 60061-1:1993/A43:2010


Trim. III 29.140.10

Pagina 104 din 170





2064EN 60061-1:1993/A44:2010


Trim. III 29.140.10

2065EN 60061-1:1993/A45:2011


Trim. III 29.140.10

2066EN 60061-1:1993/A46:2011


Trim. III 29.140.10

2067EN 60061-1:1993/A49:2013


Trim. III 29.140.10

2068EN 60061-1:1993/A5:1996


Trim. III 29.140.10

2069EN 60061-1:1993/A50:2014


Trim. III 29.140.10

2070EN 60061-1:1993/A51:2015


Trim. III 29.140.10

2071EN 60061-1:1993/A53:2015


Trim. III 29.140.10

2072EN 60061-1:1993/A54:2016


Trim. III 03.100.375 35.240.435

2073EN 60061-1:1993/A6:1996


Trim. III 29.140.10

2074EN 60061-1:1993/A7:1997


Trim. III 29.140.10

2075EN 60061-2:1993/A1:1995

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

Trim. III 29.140.10

2076EN 60061-2:1993/A18:1998


Trim. III 29.140.10

2077EN 60061-2:1993/A19:1999


Trim. III 29.140.10

2078EN 60061-2:1993/A2:1995


Trim. III 29.140.10

2079EN 60061-2:1993/A20:1999


Trim. III 29.140.10

2080EN 60061-2:1993/A21:2000


Trim. III 29.140.10

2081EN 60061-2:1993/A22:2001


Trim. III 29.140.10

2082EN 60061-2:1993/A23:2001


Trim. III 29.140.10

2083EN 60061-2:1993/A24:2001


Trim. III 29.140.10

2084EN 60061-2:1993/A25:2002


Trim. III 29.140.10

Pagina 105 din 170





2085EN 60061-2:1993/A26:2002


Trim. III 29.140.10

2086EN 60061-2:1993/A27:2002


Trim. III 29.140.10

2087EN 60061-2:1993/A28:2003


Trim. III 29.140.10

2088EN 60061-2:1993/A29:2003


Trim. III 29.140.10

2089EN 60061-2:1993/A3:1995


Trim. III 29.140.10

2090EN 60061-2:1993/A30:2003


Trim. III 29.140.10

2091EN 60061-2:1993/A31:2004


Trim. III 29.140.10

2092EN 60061-2:1993/A32:2005


Trim. III 29.140.10

2093EN 60061-2:1993/A33:2005


Trim. III 29.140.10

2094EN 60061-2:1993/A34:2006


Trim. III 29.140.10

2095EN 60061-2:1993/A35:2007


Trim. III 29.140.10

2096EN 60061-2:1993/A36:2007


Trim. III 29.140.10

2097EN 60061-2:1993/A37:2008


Trim. III 29.140.10

2098EN 60061-2:1993/A38:2009


Trim. III 29.140.10

2099EN 60061-2:1993/A4:1996


Trim. III 29.140.10

2100EN 60061-2:1993/A40:2010


Trim. III 29.140.10

2101EN 60061-2:1993/A41:2010


Trim. III 29.140.10

2102EN 60061-2:1993/A46:2013


Trim. III 29.140.10

2103EN 60061-2:1993/A47:2014


Trim. III 29.140.10

2104EN 60061-2:1993/A48:2015


Trim. III 29.140.10

2105EN 60061-2:1993/A49:2015


Trim. III 29.140.10

Pagina 106 din 170





2106EN 60061-2:1993/A5:1996


Trim. III 29.140.10

2107EN 60061-2:1993/A50:2015


Trim. III 29.140.10

2108EN 60061-2:1993/A51:2016


Trim. III 03.100.376 35.240.436

2109EN 60061-2:1993/A6:1996


Trim. III 29.140.10

2110EN 60061-2:1993/A7:1997


Trim. III 29.140.10

2111EN 60061-3:1993/A1:1995

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

Trim. III 29.140.10

2112EN 60061-3:1993/A2:1995


Trim. III 29.140.10

2113EN 60061-3:1993/A20:1998


Trim. III 29.140.10

2114EN 60061-3:1993/A21:1999


Trim. III 29.140.10

2115EN 60061-3:1993/A22:1999


Trim. III 29.140.10

2116EN 60061-3:1993/A23:2000


Trim. III 29.140.10

2117EN 60061-3:1993/A24:2001


Trim. III 29.140.10

2118EN 60061-3:1993/A25:2001


Trim. III 29.140.10

2119EN 60061-3:1993/A26:2001


Trim. III 29.140.10

2120EN 60061-3:1993/A27:2002


Trim. III 29.140.10

2121EN 60061-3:1993/A28:2002


Trim. III 29.140.10

2122 EN 61300-3-25:2016Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed

Trim. III 03.100.149 35.240.209

2123 EN 16790:2016 Conservation of cultural heritage - Integrated pest management (IPM) Trim. III 03.100.634 35.240.694

2124 EN 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) SM SR EN 61851-1:2013 Trim. III 03.100.498 35.240.558

2125EN 60061-3:1993/A29:2002


Trim. III 29.140.10

2126EN 60061-3:1993/A3:1995


Trim. III 29.140.10

Pagina 107 din 170





2127EN 60061-3:1993/A30:2003


Trim. III 29.140.10

2128EN 60061-3:1993/A31:2003


Trim. III 29.140.10

2129EN 60061-3:1993/A32:2003


Trim. III 29.140.10

2130EN 60061-3:1993/A33:2004


Trim. III 29.140.10

2131EN 60061-3:1993/A34:2005


Trim. III 29.140.10

2132EN 60061-3:1993/A35:2005


Trim. III 29.140.10

2133EN 60061-3:1993/A36:2006


Trim. III 29.140.10

2134EN 60061-3:1993/A41:2010


Trim. III 29.140.10

2135EN 60061-3:1993/A42:2010


Trim. III 29.140.10

2136EN 60061-3:1993/A47:2013


Trim. III 29.140.10

2137EN 60061-3:1993/A48:2014


Trim. III 29.140.10

2138EN 60061-3:1993/A49:2015


Trim. III 29.140.10

2139EN 60061-3:1993/A50:2015


Trim. III 29.140.10

2140EN 60061-3:1993/A51:2015


Trim. III 29.140.10

2141EN 60061-3:1993/A52:2016


Trim. III 03.100.377 35.240.437

2142EN 60061-4:1992/A10:2006

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

Trim. III 29.140.10

2143EN 60061-4:1992/A11:2007


Trim. III 29.140.10

2144EN 60061-4:1992/A12:2009


Trim. III 29.140.10

2145EN 60061-4:1992/A13:2011


Trim. III 29.140.10

2146EN 60061-4:1992/A14:2011


Trim. III 29.140.10

2147EN 60061-4:1992/A7:2001


Trim. III 29.140.10

Pagina 108 din 170





2148EN 60061-4:1992/A9:2005


Trim. III 29.140.10

2149 EN 60062:2016 Marking codes for resistors and capacitors SM EN 60062:2014 Trim. III 03.100.315 35.240.375

2150 EN 60068-2-33:1999 Environmental testing - Part 2: Tests - Guidance on change of temperature testsGOST 28219-89 (CEI 68-2-33-71)

Trim. III 19.040

2151 IEC 60068-2-46:1982Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

GOST 28230-89 (CEI 68-2-46-82)

Trim. III 19.040

2152 EN 60068-3-1:2011Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests

Trim. III 19.040

2153 EN 60068-3-13:2016 Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering SM EN 60068-2-44:2014 Trim. III 03.100.378 35.240.438

2154 EN 60068-3-2:1999Environmental testing - Part 3: Background information - Section 2: Combined temperature/low air pressure tests

Trim. III 19.040

2155 EN 60068-3-8:2003Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests

Trim. III 19.040 29.020

2156EN 60071-1:2006/A1:2010

Insulation co-ordination - Part 1: Definitions, principles and rules Trim. III 29.080.30

2157 EN 60071-5:2015Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations

Trim. III 29.080.30

2158 EN 60076-10:2016 Power transformers - Part 10: Determination of sound levels SM SR EN 60076-10:2013 Trim. III 03.100.259 35.240.319

2159 EN 60076-19:2015Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors

SM CEI/TS 60076-19:2014 Trim. III 29.180

2160EN 60079-19:2011/A1:2015

Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation Trim. III 29.260.20

2161 EN 60079-29-3:2014Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems

Trim. III 29.260.20

2162 CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance Trim. III 29.260.20

2163 EN 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests Trim. III 29.260.20

2164 CLC/TR 60079-33:2015 Explosive atmospheres - Part 33: Equipment protection by special protection 's' Trim. III 29.260.20

2165 EN 60086-1:2015 Primary batteries - Part 1: General SM EN 60086-1:2015 Trim. III 29.220.10

2166 EN 60086-3:2016 Primary batteries - Part 3: Watch batteries SM EN 60086-3:2015 Trim. III 03.100.379 35.240.439

2167 EN 60086-5:2016 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte SM EN 60086-5:2015 Trim. III 03.100.260 35.240.320

2168 EN 60099-8:2011Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV

Trim. III 29.240.10

2169 EN 60099-9:2014 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations Trim. III 29.120.50 29.240.10

Pagina 109 din 170





2170 IEC 60115-7:1984 Fixed resistors for use in electronic equipment. Part 7: Sectional specification: Fixed resistor networks in which not all resistors are individually measurable

GOST 29069-91 (CEI 115-7-84 )

Trim. III 31.040.10

2171 EN 60118-0:2015Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids

SM SR EN 60118-1:2013 Trim. III 17.140.50

2172EN 60118-1:1995/A1:1998

Hearing aids - Part 1: Hearing aids with induction pick-up coil input Trim. III 17.140.50

2173 EN 60118-12:1996 Hearing aids - Part 12: Dimensions of electrical connector systems Trim. III 17.140.50 31.220.10

2174 EN 60118-14:1998 Hearing aids - Part 14: Specification of a digital interface Trim. III 17.140.50

2175 EN 60118-15:2012Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal

Trim. III 17.140.50

2176EN 60118-2:1995/A2:1997

Hearing aids - Part 2: Hearing aids with automatic gain control circuits Trim. III 17.140.50

2177 EN 60118-4:2015Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements

SM SR EN 60118-4:2013 Trim. III 17.140.50

2178 ISO 6014:1986 Earth-moving machinery -- Determination of ground speedGOST 27927-88 (ISO 6014-86)

Trim. III 53.100

2179 EN 60143-4:2010 Series capacitors for power systems - Part 4: Thyristor controlled series capacitors Trim. III 29.240.99 31.060.70

2180 IEC 60151-28:1978Measurements of the electrical properties of electronic tubes - Part 28: Methods of measurement of colour television picture tubes

GOST 28176-89 (CEI 151-28-78)

Trim. III 31.100

2181 EN 60153-1:2016 Hollow metallic waveguides - Part 1: General requirements and measuring methods Trim. III 03.100.380 35.240.440

2182 EN 60153-2:2016Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides

Trim. III 03.100.381 35.240.441

2183 EN 60154-1:2016 Flanges for waveguides - Part 1: General requirements Trim. III 03.100.382 35.240.442

2184 EN 60154-2:2016Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides

Trim. III 03.100.181 35.240.241

2185 EN 60168:1994/A1:1997Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 kV

Trim. III 29.080.10

2186 EN 60168:1994/A2:2000Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 kV

Trim. III 29.080.10

2187 EN 60172:2015Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires

Trim. III 29.060.10

2188 EN 60191-6-13:2016Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA)

SM SR EN 60191-6-13:2013 Trim. III 03.100.182 35.240.242

2189 EN 60195:2016 Method of measurement of current noise generated in fixed resistors Trim. III 03.100.616 35.240.676

2190 ISO 602:2015 Coal -- Determination of mineral matterGOST 29086-91 (ISO 602-83)

Trim. III 73.040

Pagina 110 din 170





2191 ISO 6020-3:2015Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 3: Compact series with bores from 250 mm to 500 mm

GOST ISO 6020-3-2002 Trim. III 23.100.20

2192 EN 60205:2006 Calculation of the effective parameters of magnetic piece parts Trim. III 29.100.10

2193 EN 60205:2006/A1:2009 Calculation of the effective parameters of magnetic piece parts Trim. III 29.100.10

2194 EN 60214-1:2014 Tap-changers - Part 1: Performance requirements and test methods Trim. III 29.180

2195 EN 60229:2008 Electric cables - Tests on extruded oversheaths with a special protective function Trim. III 29.060.20

2196 EN 60264-1:1994 Packaging of winding wires - Part 1: Containers for round winding wires Trim. III 29.060.10 55.040

2197EN 60264-1:1994/A1:2009

Packaging of winding wires - Part 1: Containers for round winding wires Trim. III 29.060.10 55.060

2198 EN 60264-2-1:1994 Packaging of winding wires - Part 2-1: Cylindrical barrelled delivery spools - Basic dimensions Trim. III 55.060

2199EN 60264-2-1:1994/A1:2003

Packaging of winding wires - Part 2-1: Cylindrical barrelled delivery spools - Basic dimensions Trim. III 29.060.10

2200 EN 60264-2-2:1994Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material

Trim. III 55.060

2201EN 60264-2-2:1994/A1:2004

Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material

Trim. III 29.060.10

2202 EN 60264-2-3:1994Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material

Trim. III 55.060

2203EN 60264-2-3:1994/A1:2004

Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material

Trim. III 29.060.10

2204 EN 60264-3-1:2000 Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions Trim. III 29.060.10 55.060

2205EN 60264-3-1:2000/A1:2003

Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions Trim. III 29.060.10 55.060

2206 EN 60264-3-2:1999Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials

Trim. III 29.060.10 55.060

2207 EN 60264-3-3:1994Packaging of winding wires - Part 3-3: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material

Trim. III 55.060

2208EN 60264-3-3:1994/A1:2004

Packaging of winding wires - Part 3-3: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material

Trim. III 29.060.10

2209 EN 60264-3-4:1999Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools

Trim. III 29.060.10 55.060

2210 EN 60264-3-5:1999Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material

Trim. III 29.060.10 55.060

2211 EN 60264-4-1:2010Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials

Trim. III 29.060.10 55.060

2212EN 60264-4-2:1994/A1:2004

Packaging of winding wires - Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools

Trim. III 29.060.10

Pagina 111 din 170





2213 EN 60264-5-1:1997Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions

Trim. III 55.060

2214EN 60264-5-1:1997/A1:2003

Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions

Trim. III 29.060.10 55.060

2215 EN 60264-5-2:2001Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material

Trim. III 29.060.10 55.060

2216 CLC/TR 60269-5:2011 Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses Trim. III 29.120.50

2217 EN 60282-1:2009 High-voltage fuses - Part 1: Current-limiting fuses Trim. III 29.120.50

2218EN 60282-1:2009/A1:2014

High-voltage fuses - Part 1: Current-limiting fuses Trim. III 29.120.50

2219 EN 60300-1:2014 Dependability management - Part 1: Guidance for management and application Trim. III 03.100.40 03.120.01 21.020

2220 EN 60300-2:2004 Dependability management - Part 2: Guidelines for dependability management Trim. III 03.100.40 03.120.01

2221 EN 60300-3-1:2004Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology

Trim. III 03.120.30 21.020

2222 EN 60300-3-11:2009 Dependability management - Part 3-11: Application guide - Reliability centred maintenance Trim. III 03.100.40 03.120.01

2223 EN 60300-3-15:2009 Dependability management - Part 3-15: Application guide - Engineering of system dependability Trim. III 03.120.01

2224 EN 60300-3-16:2008Dependability management - Part 3-16: Application guide - Guidelines for specification of maintenance support services

Trim. III 03.100.40 03.120.01

2225 EN 60300-3-2:2005Dependability management - Part 3-2: Application guide - Collection of dependability data from the field

Trim. III 03.100.40 03.120.01

2226 EN 60300-3-4:2008Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements

Trim. III 03.100.40 03.120.01

2227 ISO 603-15:1999Bonded abrasive products -- Dimensions -- Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines

GOST 21963-2002 (ISO 603-15-99, ISO 603-16-99)

Trim. III 25.100.70

2228 ISO 603-16:1999Bonded abrasive produtcs -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held power tools

GOST 21963-2002 (ISO 603-15-99, ISO 603-16-99)

Trim. III 25.100.70

2229EN 60317-0-3:2008/A1:2013

Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire

Trim. III 29.060.10

2230EN 60317-0-6:2001/A1:2006

Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire

Trim. III 29.060.10

2231 EN 60317-0-7:2012Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm

Trim. III 29.060.10

Pagina 112 din 170





2232 EN 60317-0-8:2012Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire

Trim. III 29.060.10

2233 EN 60317-0-9:2015Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire

Trim. III 29.060.10

2234 EN 60317-12:2010Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120

Trim. III 29.060.10

2235EN 60317-15:2004/A1:2010

Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180

Trim. III 29.060.10

2236 EN 60317-17:2010Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105

Trim. III 29.060.10

2237 EN 60317-18:2004Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120

Trim. III 29.060.10

2238EN 60317-18:2004/A1:2010

Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120

Trim. III 29.060.10

2239 EN 60317-20:2014Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155

Trim. III 29.060.10

2240EN 60317-22:2004/A1:2010

Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180

Trim. III 29.060.10

2241 EN 60317-26:1996Specifications for particular types of winding wires - Part 26: Polyamide-imide enamelled round copper wire, class 200

Trim. III 29.060.10

2242EN 60317-26:1996/A1:1998

Specifications for particular types of winding wires - Part 26: Polyamide-imide enamelled round copper wire, class 200

Trim. III 29.060.10

2243EN 60317-26:1996/A2:2010

Specifications for particular types of winding wires - Part 26: Polyamide-imide enamelled round copper wire, class 200

Trim. III 29.060.10

2244 EN 60317-27:2014Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire

Trim. III 29.060.10

2245 EN 60317-28:2014Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180

Trim. III 29.060.10

2246EN 60317-29:1996/A1:1998

Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200

Trim. III 29.060.10

2247EN 60317-29:1996/A2:2010

Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200

Trim. III 29.060.10

2248 EN 60317-35:2014Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer

Trim. III 29.060.10

2249 EN 60317-36:2014Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer

Trim. III 29.060.10

2250 EN 60317-37:2014Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer

Trim. III 29.060.10

Pagina 113 din 170





2251 EN 60317-40:2015Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200

SM SR EN 60317-40+A1:2013

Trim. III 29.060.10

2252EN 60317-42:1997/A1:2010

Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200

Trim. III 29.060.10

2253 EN 60317-44:1997Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240

Trim. III 29.060.10

2254EN 60317-44:1997/A1:2010

Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240

Trim. III 29.060.10

2255 EN 60317-48:2012Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155

Trim. III 29.060.10

2256 EN 60317-49:2012Specifications for particular types of winding wires - Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180

Trim. III 29.060.10

2257 EN 60317-50:2012Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200

Trim. III 29.060.10

2258 EN 60317-52:2014Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220

Trim. III 29.060.10

2259 EN 60317-53:2014Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220

Trim. III 29.060.10

2260 EN 60317-55:2014Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180

Trim. III 29.060.10

2261 EN 60317-57:2010Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220

Trim. III 29.060.10

2262 EN 60317-58:2010Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220

Trim. III 29.060.10

2263 EN 60317-60:2012Specifications for particular types of winding wires - Part 60: Polyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 155

Trim. III 29.060.10

2264 EN 60317-61:2012Specifications for particular types of winding wires - Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180

Trim. III 29.060.10

2265 EN 60317-62:2012Specifications for particular types of winding wires - Part 62: Polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200

Trim. III 29.060.10

2266EN 60320-2-3:1998/A1:2005

Appliance couplers for household and similar general purposes - Part 2-3: Appliance coupler with a degree of protection higher than IPX0

Trim. III 29.120.30

Pagina 114 din 170





2267EN 60332-1-2:2004/A11:2016

Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

Trim. III 03.100.491 35.240.551

2268EN 60335-2-70:2002/A1:2007

Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines

Trim. III 65.060.99

2269EN 60335-2-76:2005/A1:2006

Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers

Trim. III 65.040.99

2270EN 60335-2-76:2005/A11:2008


Trim. III 65.040.99

2271EN 60335-2-76:2005/A12:2010


Trim. III 65.040.99

2272EN 60335-2-76:2005/A2:2015


Trim. III 65.040.99

2273 EN 60350-1:2016Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring Performance

SM EN 60350-1:2016 Trim. III 03.100.183 35.240.243

2274 EN 60352-3:1994Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance

Trim. III 29.120.20

2275 EN 60352-4:1994Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance

Trim. III 29.120.20

2276EN 60352-4:1994/A1:2000

Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance

Trim. III 29.120.20

2277EN 60357:2003/A11:2016

Tungsten halogen lamps (non-vehicle) - Performance specifications Trim. III 03.100.648 35.240.708

2278 EN 60358-3:2014Coupling capacitors and capacitor dividers - Part 3: AC or DC coupling capacitors for harmonic-filters applications

Trim. III 29.120.99 29.240.99

2279 HD 60364-4-46:2016 Low-voltage electrical installations - Part 4-46: Protection for safety - Isolation and switching Trim. III 03.100.179 35.240.239

2280HD 60364-5-551:2010/A11: 2016

Low-voltage electrical installations - Part 5-55: Selection and erection of electrical equipment - Other equipment - Clause 551: Low-voltage generating sets

Trim. III 03.100.668 35.240.728

2281 HD 60364-6:2016 Low-voltage electrical installations - Part 6: Verification SM SR HD 60364-6:2013 Trim. III 03.100.617 35.240.677

2282 IEC 60377-1:1973Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 1: General

GOST 27496.1-87 (CEI 377-1-73)

Trim. III 17.220.99 29.035.01

2283 IEC 60377-2:1977Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 2: Resonance methods

GOST 27496.2-87 (CEI 377-2-77)

Trim. III 17.220.99 29.035.01

2284 EN 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification SM SR EN 60384-1:2013 Trim. III 03.100.383 35.240.443

Pagina 115 din 170





2285EN 60384-14:2013/A1:2016

Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

Trim. III 03.100.171 35.240.231

2286 EN 60384-14-2:2016Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only

Trim. III 03.100.669 35.240.729

2287 EN 60384-18:2016Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte

Trim. III 03.100.384 35.240.444

2288 EN 60384-3:2016Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte

Trim. III 03.100.316 35.240.376

2289 EN 60384-4:2016Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte

Trim. III 03.100.317 35.240.377

2290 IEC 60394-1:1972 Varnished fabrics for electrical purposes. Part 1: Definitions and general requirementsGOST 28034-89 (CEI 394-1-72, CEI 394-2-72)

Trim. III 29.035.60

2291 IEC 60394-2:1972 Varnished fabrics for electrical purposes. Part 2: Methods of testGOST 28034-89 (CEI 394-1-72, CEI 394-2-72)

Trim. III 29.035.60 17.220.99

2292 EN 60401-1:2005Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities

Trim. III 29.100.10

2293 EN 60401-2:2010Terms and nomenclature for cores made of magnetically soft ferrites - Part 2: Reference of dimensions

Trim. III 29.100.10

2294 EN 60401-3:2003Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores

Trim. III 29.100.10

2295 EN 60404-11:2013Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip

Trim. III 17.220.01 29.030

2296 EN 60404-13:2007Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip

Trim. III 17.220.20 29.030

2297 EN 60404-14:2002Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method

Trim. III 17.220.20 29.030

2298 EN 60404-15:2012Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials

Trim. III 17.220.01 29.030

2299 EN 60404-2:1998Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame

Trim. III 29.030

2300EN 60404-2:1998/A1:2008

Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame

Trim. III 17.220.20 29.030

2301 EN 60404-4:1997Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials

Trim. III 29.030

2302EN 60404-4:1997/A1:2002

Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials

Trim. III 17.220.20 29.030

Pagina 116 din 170





2303EN 60404-4:1997/A2:2008

Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials

Trim. III 17.220.20 29.030

2304 EN 60404-5:2015Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties

Trim. III 17.220.20 29.030

2305 EN 60404-6:2003Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens

Trim. III 17.220.20 29.030

2306 EN 60404-8-1:2015Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials

Trim. III 17.220.20 29.030

2307 EN 60404-8-6:2009Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials

Trim. III 29.030

2308 EN 60417-1:1999 Graphical symbols for use on equipment - Part 1: Overview and applicationGOST 28312-89 (CEI 417-73)

Trim. III 01.080.20

2309 EN 60417-2:1999 Graphical symbols for use on equipment - Part 2: Symbol originalsGOST 28312-89 (CEI 417-73)

Trim. III 01.080.20

2310 EN 60424-8:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8: PQ-cores Trim. III 29.100.10

2311 EN 60450:2004Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

Trim. III 17.220.99 29.035.01

2312 EN 60450:2004/A1:2007Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

Trim. III 17.220.99 29.035.01

2313EN 60454-3-1:1998/A1:2001

Pressure-sensitive adhesive tapes for electrical purposes - Part 3-1: Specifications for individual materials - PVC film tapes with pressure-sensitive adhesive

Trim. III 29.035.20

2314 EN 60454-3-11:2007Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives

Trim. III 29.035.20

2315 EN 60454-3-12:2006Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive

Trim. III 29.035.20

2316 EN 60454-3-14:2001Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive

Trim. III 29.035.20

2317 EN 60454-3-19:2003Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides

Trim. III 29.035.20

2318 EN 60454-3-6:1998Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Polycarbonate film tapes with acrylic thermoplastic adhesive

Trim. III 29.035.20

2319 EN 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test SM SR EN 60455-2:2013 Trim. III 17.200.99 29.035.01

Pagina 117 din 170





2320 EN 60455-3-8:2013Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories

Trim. III 29.035.01

2321 EN 60464-1:1999 Varnishes used for electrical insulation - Part 1: Definitions and general requirements Trim. III 29.035.01

2322EN 60464-1:1999/A1:2006

Varnishes used for electrical insulation - Part 1: Definitions and general requirements Trim. III 29.035.01

2323EN 60464-2:2001/A1:2006

Varnishes used for electrical insulation - Part 2: Methods of test Trim. III 17.220.99 29.035.01

2324 EN 60464-3-1:2001Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes

Trim. III 29.035.01

2325EN 60464-3-1:2001/A1:2006

Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes

Trim. III 29.035.01

2326 EN 60464-3-2:2001Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes

Trim. III 29.035.01

2327EN 60464-3-2:2001/A1:2006

Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes

Trim. III 29.035.01

2328 EN 60475:2011 Method of sampling insulating liquids Trim. III 29.040

2329 EN 60512-11-8:1999Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust

Trim. III 19.080 31.220.01

2330 EN 60539-1:2016 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification SM SR EN 60539-1:2013 Trim. III 03.100.618 35.240.678

2331 EN 60544-5:2012Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service

Trim. III 17.240 29.035.01

2332 EN 60549:2013 High-voltage fuses for the external protection of shunt capacitors Trim. III 29.120.50

2333 IEC 60554-1:1977Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements

GOST 30180.1-99 (CEI 554-1-77)

Trim. III 29.035.10

2334 IEC 60554-3-1:1979Specification for cellulosic papers for electrical purposes. Part 3-1: Specifications for individual materials. General purpose electrical paper

GOST CEI 60554-3-1-2002 Trim. III 29.035.10

2335 EN 60556:2006Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties

Trim. III 29.100.10

2336 EN 60556:2006/A1:2016 Gyromagnetic materials intended for application at microwave Trim. III 03.100.649 35.240.709

2337 EN 60565:2007 Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz Trim. III 17.140.50

2338 EN 60584-3:2008Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system

Trim. III 17.200.20

2339 IEC 60589:1977Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids

GOST 6433.6-84(CEI 589-77)

Trim. III 17.220.99 29.035.01

2340 IEC 60590:1977 Determination of the aromatic hydrocarbon content of new mineral insulating oilsGOST 28640-90 (CEI 590-77)

Trim. III 29.040.10

Pagina 118 din 170





2341EN 60598-2-13:2006/A2:2016

Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires Trim. III 03.100.318 35.240.378

2342EN 60598-2-18:1994/A1:2012

Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

Trim. III 29.140.40 97.220.10

2343 EN 60599:1999/A1:2007Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis

Trim. III 17.220.99 29.040.10 29.180

2344EN 60601-1-3:2008/A11:2016

Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment

Trim. III 03.100.172 35.240.232

2345 EN 60601-2-3:2015Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment

SM EN 60601-2-3+A1:2015 Trim. III 11.040.60

2346EN 60601-2-3:2015/A1:2016

Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment

Trim. III 11.040.60

2347EN 60601-2-33:2010/A12:2016

Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

Trim. III 03.100.173 35.240.233

2348EN 60601-2-44:2009/A2:2016

Medical electrical equipment - Part 2-44: Particular requirements for the Trim. III 03.100.650 35.240.710

2349EN 60601-2-6:2015/A1:2016

Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment

Trim. III 03.100.386 35.240.446

2350EN 60626-3:2008/A1:2012

Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials

Trim. III 29.035.01

2351 EN 60630:1998 Maximum lamp outlines for incandescent lamps Trim. III 29.140.20

2352 EN 60630:1998/A3:1999 Maximum lamp outlines for incandescent lamps Trim. III 29.140.20





2357 EN 60633:1999/A1:2009 Terminology for high-voltage direct current (HVDC) transmission Trim. III 29.200

Pagina 119 din 170





2358 EN 60633:1999/A2:2015 Terminology for high-voltage direct current (HVDC) transmission Trim. III 29.200

2359 EN 60641-3-1:2008Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1

Trim. III 29.035.10

2360 EN 60641-3-2:2008Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1

Trim. III 29.035.10

2361 IEC TR 60648:1979Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation

GOST 27492-87 (CEI 648-79)

Trim. III 29.035.20

2362 EN 60652:2004 Loading tests on overhead line structures Trim. III 29.240.20

2363 EN 60666:2010 Detection and determination of specified additives in mineral insulating oils Trim. III 17.220.99 29.040.10

2364 IEC 60667-1:1980Specification for vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements

GOST 28938-91 (CEI 667-1-80)

Trim. III 29.035.10

2365 IEC 60667-2:1982 Specification for vulcanized fibre for electrical purposes. Part 2: Methods of testGOST 28939-91 (CEI 667-2-82)

Trim. III 29.035.10

2366 IEC 60667-3-1:1986Specification for vulcanized fibre for electrical purposes - Part 3-1: Specifications for individual materials - Flat sheets

GOST 28940-91 (CEI 667-3-1-86)

Trim. III 29.035.10

2367EN 60669-1:1999/IS1:2009

Switches for household and similar fixed-electrical installations - Part 1: General requirements Trim. III 29.120.40

2368 EN 60669-2-5:2016Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES)

Trim. III 03.100.388 35.240.448

2369EN 60670-1:2005/IS1:2009

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements

Trim. III 29.120.10

2370EN 60674-2:1998/A1:2001

Specification for plastic films for electrical purposes - Part 2: Methods of test Trim. III 17.220.99 29.035.20

2371 EN 60674-3-1:1998Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

Trim. III 29.035.20

2372EN 60674-3-1:1998/A1:2011

Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

Trim. III 29.035.20

2373 EN 60674-3-2:1998Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation

Trim. III 29.035.20

2374 EN 60674-3-3:1998Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation

Trim. III 29.035.20

2375 EN 60674-3-4 to 6:1995Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation

Trim. III 29.040.20 83.140

Pagina 120 din 170





2376 EN 60674-3-7:1998Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation

Trim. III 29.035.20

2377 EN 60674-3-8:2011Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation

Trim. III 29.035.20

2378EN 60684-3-100 to 105:2001

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving

Trim. III 29.035.20

2379 EN 60684-3-116:2011Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose

Trim. III 29.035.20

2380EN 60684-3-121 to 124:2001

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving

Trim. III 29.035.20

2381 EN 60684-3-136:1998Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose

Trim. III 29.035.20

2382EN 60684-3-145 to 147:2001

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving

Trim. III 29.035.20

2383 EN 60684-3-151:1998Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose

Trim. III 29.035.01

2384 EN 60684-3-165:2004Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving

Trim. III 29.035.20

2385 EN 60684-3-205:2011Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1

Trim. III 29.035.20

2386 EN 60684-3-209:2010Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded

Trim. III 29.035.20

2387 EN 60684-3-211:2007Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1

Trim. III 29.035.20

2388 EN 60684-3-212:2006Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings

Trim. III 29.035.20

2389 EN 60684-3-214:2005Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1 - Thick and medium wall

Trim. III 29.035.20

2390 EN 60684-3-214:2014Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall

Trim. III 29.035.20

2391 EN 60684-3-216:2005Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving

Trim. III 29.035.20

Pagina 121 din 170





2392EN 60684-3-216:2005/A2:2014

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving

Trim. III 29.035.20

2393 EN 60684-3-228:2004Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1

Trim. III 29.035.20

2394 EN 60684-3-229:2003Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1

Trim. III 29.035.20

2395 EN 60684-3-233:2006Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1

Trim. III 29.035.20

2396EN 60684-3-240 to 243:2002

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving

Trim. III 29.035.20

2397 EN 60684-3-246:2007Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded

Trim. III 29.035.20

2398 EN 60684-3-247:2011Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded, thick and medium wall

Trim. III 29.035.20

2399 EN 60684-3-248:2007Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1

Trim. III 29.035.20

2400 EN 60684-3-271:2011Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1

Trim. III 29.035.20

2401 EN 60684-3-280:2010Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

Trim. III 29.035.20

2402EN 60684-3-280:2010/A1:2014

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

Trim. III 29.035.20

2403 EN 60684-3-281:2010Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive

Trim. III 29.035.20

2404 EN 60684-3-282:2010Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control

Trim. III 29.035.20

2405 EN 60684-3-283:2011Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving, for bus-bar insulation

Trim. III 29.035.20

2406EN 60684-3-283:2011/A1:2014

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving, for bus-bar insulation

Trim. III 29.035.20

2407 EN 60684-3-284:2014Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable sleevings, for oil barrier applications

Trim. III 29.035.20

2408 EN 60684-3-285:2014Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation

Trim. III 29.035.20

Pagina 122 din 170





2409 EN 60684-3-300:2002Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated

Trim. III 29.035.20

2410 EN 60684-3-320:2002Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated

Trim. III 29.035.20

2411EN 60684-3-340 to 342:2003

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving

Trim. III 29.035.20

2412EN 60684-3-343 to 345:2002

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated

Trim. III 29.035.20

2413EN 60684-3-400 to 402:2002

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating

Trim. III 29.035.20

2414EN 60684-3-403 to 405:2002

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic based coating

Trim. III 29.035.20

2415EN 60684-3-406 to 408:2003

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating

Trim. III 29.035.20

2416 EN 60684-3-409:1999Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating

Trim. III 29.035.20

2417EN 60684-3-420 to 422:2002

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating

Trim. III 29.035.20

2418 EN 60691:2016 Thermal-links - Requirements and application guide

SM SR EN 60691:2010 SM SR EN 60691:2010/A1:2010 SM SR EN 60691:2010/A2:2013

Trim. III 03.100.319 35.240.379

2419 EN 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test SM SR EN 60695-10-3:2010 Trim. III 03.100.175 35.240.235

2420 EN 60695-1-21:2016Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods

Trim. III 03.100.174 35.240.234

2421 EN 60700-1:2015Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

SM EN 60700-1:2014 Trim. III 29.200

2422 EN 60700-2:2016 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology Trim. III 03.100.176 35.240.236

2423 EN 60702-3:2016 Mineral insulated cables and their terminations with a rated voltage not Trim. III 03.100.651 35.240.711

2424 EN 60704-2-1:2015Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners

SM SR EN 60704-2-1:2013 Trim. III 17.140.20 97.080

Pagina 123 din 170





2425 EN 60704-2-10:2011Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these

Trim. III 17.140.20 97.040.20

2426 EN 60704-2-14:2013Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers

Trim. III 17.140.20 97.040.20

2427EN 60704-2-14:2013/A11:2015

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers

Trim. III 17.140.20 97.040.20

2428EN 60704-2-5:2005/A1:2015

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters

Trim. III 17.140.20 97.100.10

2429 EN 60704-2-6:2012Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers

SM SR EN 60704-2-6:2013 Trim. III 17.140.20 97.060

2430 EN 60706-2:2006Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase

Trim. III 03.120.01 21.020

2431 EN 60706-3:2006Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data

Trim. III 03.120.01 21.020

2432 EN 60706-5:2007 Maintainability of equipment - Part 5: Testability and diagnostic testing Trim. III 03.120.01 03.120.30 21.020

2433 EN 60708:2005 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath Trim. III 29.060.20

2434EN 60708:2005/AC:2016-08

Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath Trim. III 03.100.492 35.240.552

2435 EN 60709:2010 Nuclear power plants - Instrumentation and control systems important to safety - Separation Trim. III 27.120.20

2436 EN 60721-2-1:2014Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and Humidity

Trim. III 19.040

2437 EN 60721-2-2:2013Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind

Trim. III 19.040

2438 EN 60721-2-3:2014Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure

Trim. III 19.040

2439 EN 60721-2-9:2014Classification of environmental conditions - Part 2-9: Environmental conditions appearing in nature - Measured shock and vibration data - Storage, transportation and in-use

Trim. III 19.040

2440EN 60721-3-3:1995/A2:1997

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations

Trim. III 19.040

2441EN 60721-3-4:1995/A1:1997

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations

Trim. III 19.040

Pagina 124 din 170





2442 EN 60721-3-5:1997Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations

Trim. III 19.040

2443EN 60721-3-6:1993/A2:1997

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 6: Ship environment

Trim. III 19.040

2444EN 60721-3-7:1995/A1:1997

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use

Trim. III 19.040

2445 EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements Trim. III 03.100.619 35.240.679

2446 EN 60740-1:2005 Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics Trim. III 29.100.10

2447 EN 60746-1:2003 Expression of performance of electrochemical analyzers - Part 1: General Trim. III 19.040 71.040

2448 EN 60746-2:2003 Expression of performance of electrochemical analyzers - Part 2: pH value Trim. III 19.040 71.040

2449 EN 60749-44:2016Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices

Trim. III 03.100.320 35.240.380

2450 EN 60758:2016 Synthetic quartz crystal - Specifications and guidelines for use Trim. III 03.100.389 35.240.449

2451 EN 60763-1:2011Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements

Trim. III 29.035.10

2452 EN 60763-2:2007 Specification for laminated pressboard - Part 2: Methods of test Trim. III 17.220.99 29.035.10

2453 EN 60763-3-1:2011Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2

Trim. III 29.035.10

2454 IEC TR 60782:1984 Measurements of ultrasonic magnetostrictive transducersGOST 27955-88 (CEI 782-84)

Trim. III 17.140.50

2455 EN 60809:2015 Lamps for road vehicles - Dimensional, electrical and luminous requirements SM SR EN 60809+A1:2013 Trim. III 29.140.20 43.040.20

2456 EN 60810:2015 Lamps for road vehicles - Performance requirements SM SR EN 60810:2013 Trim. III 29.140.99

2457 EN 60814:1997Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration

Trim. III 29.040.10

2458 EN 60819-3-1:2001Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Filled glass paper

Trim. III 29.035.10

2459 EN 60819-3-2:2001Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper

Trim. III 29.035.10

2460 EN 60819-3-3:2011Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers

Trim. III 29.035.10

2461 EN 60819-3-4:2014Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles

Trim. III 29.035.10

2462 EN 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes SM SR EN 60836:2014 Trim. III 29.040.10

Pagina 125 din 170





2463 EN 60848:2013 GRAFCET specification language for sequential function charts Trim. III 29.020

2464EN 60851-2:2009/A1:2015

Winding wires - Test methods - Part 2: Determination of dimensions Trim. III 29.060.10

2465EN 60851-3:2009/A1:2013

Winding wires - Test methods - Part 3: Mechanical properties Trim. III 29.060.10

2466 EN 60851-4:2016 Winding wires - Test methods - Part 4: Chemical properties Trim. III 03.100.321 35.240.381

2467EN 60851-5:2008/A1:2011

Winding wires - Test methods - Part 5: Electrical properties Trim. III 29.060.10

2468 EN 60852-4:1996Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations

Trim. III 29.180

2469EN 60870-5-104:2006/A1:2016

Telecontrol equipment and systems - Part 5-104: Transmission protocols- Network access for IEC 60870-5-101 using standard transport profiles

Trim. III 03.100.177 35.240.237

2470 EN 60880:2009Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions

Trim. III 27.120.20

2471EN 60898-1:2003/A12:2008

Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

Trim. III 29.120.50

2472 ISO 609:1996Solid mineral fuels -- Determination of carbon and hydrogen -- High temperature combustion method

GOST 2408.4-98 (ISO 609-96)

Trim. III 75.160.10 73.040

2473 EN 60904-2:2015 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices SM SR EN 60904-2:2013 Trim. III 27.160

2474 EN 60904-3:2016Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data

SM SR EN 60904-3:2013 Trim. III 03.100.493 35.240.553

2475 CLC/TR 60919-1:2005Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions

Trim. III 29.200 29.240.99

2476 CLC/TR 60919-2:2010Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching

Trim. III 29.200 29.240.99

2477 EN 60927:2007/A1:2013 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements Trim. III 29.140.30

2478 EN 60938-1:1999 Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification Trim. III 29.100.10 31.020

2479EN 60938-1:1999/A1:2007

Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification Trim. III 29.100.10 31.020

2480 EN 60938-2:1999 Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification Trim. III 29.100.10 31.020

2481EN 60938-2:1999/A1:2007

Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification Trim. III 29.100.10 31.020

2482 EN 60938-2-1:1999Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D

Trim. III 29.100.10 31.020

Pagina 126 din 170





2483EN 60950-22:2006/A11:2008

Information technology equipment - Safety - Part 22: Equipment installed outdoors Trim. III 29.020 35.020

2484 EN 60952-1:2013 Aircraft batteries - Part 1: General test requirements and performance levels Trim. III 29.220.20 49.060

2485 EN 60952-2:2013 Aircraft batteries - Part 2: Design and construction requirements Trim. III 29.220.20 49.060

2486 EN 60952-3:2013Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP)

Trim. III 29.220.20 49.060

2487 EN 60953-1:1995Rules for steam turbine thermal acceptance tests - Part 1: Method A - High accuracy for large condensing steam turbines

Trim. III 27.040

2488 EN 60953-2:1995Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines

Trim. III 27.040

2489 EN 60953-3:2002Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines

Trim. III 27.040

2490 EN 60958-4-1:2016 Digital audio interface - Part 4-1: Professional applications - Audio content Trim. III 03.100.620 35.240.680

2491 EN 60958-4-2:2016 Digital audio interface - Part 4-2: Professional applications - Metadata and subcode Trim. III 03.100.621 35.240.681

2492 EN 60958-4-4:2016 Digital audio interface - Part 4-4: Professional applications - Physical and electrical parameters Trim. III 03.100.574 35.240.634

2493 EN 60964:2010 Nuclear power plants - Control rooms - Design Trim. III 27.120.20

2494 EN 60965:2016Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room

Trim. III 03.100.390 35.240.450

2495 EN 60966-2-4:2016Radio Frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors

Trim. III 03.100.575 35.240.635

2496 EN 60970:2007 Insulating liquids - Methods for counting and sizing particles Trim. III 17.220.99 29.040.10

2497 EN 60974-4:2016 Arc welding equipment - Part 4: Periodic inspection and testing SM EN 60974-4:2015 Trim. III 03.100.178 35.240.238

2498 EN 60983:1996 Miniature lamps Trim. III 29.140.20

2499 EN 60987:2015Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems

Trim. III 27.120.20

2500 EN 60990:2016 Methods of measurement of touch current and protective conductor current SM SR EN 60990:2013 Trim. III 03.100.391 35.240.451

2501 ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughsGOST 25996-97 (ISO 610-90)

Trim. III 73.100.40 53.040.20

2502 EN 61000-1-2:2016Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena

SM IEC 61000-1-2:2016 Trim. III 03.100.392 35.240.452

2503 EN 61000-4-9:2016Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test

SM SR EN 61000-4-9:2013 Trim. IV 03.100.322 35.240.382

2504 EN 61003-1:2016Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance

Trim. IV 03.100.142 35.240.202

2505 EN 61003-2:2016Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 2: Guidance for inspection and routine testing

Trim. IV 03.100.143 35.240.203

Pagina 127 din 170





2506 EN 61007:1997Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures

Trim. IV 29.180

2507EN 61008-1:2004/A13:2012

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules

Trim. IV 29.120.50

2508EN 61009-1:2004/A14:2012

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules

Trim. IV 29.120.50

2509EN 61009-1:2012/A12:2016

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

Trim. IV 03.100.678 35.240.738

2510 EN 61010-2-012:2016Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment

Trim. IV 03.100.144 35.240.204

2511 EN 61010-2-040:2015Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

SM SR EN 61010-2-040:2010

Trim. IV 19.080 71.040.10

2512 EN 61012:1998 Filters for the measurement of audible sound in the presence of ultrasound Trim. IV 17.140.50

2513 EN 61014:2003 Programmes for reliability growth Trim. IV 03.100.40 03.120.01 21.020

2514 EN 61021-1:1997Laminated core packages for transformers and inductors used in telecommunication and electronic equipment - Part 1: Dimensions

Trim. IV 29.100.10 29.180

2515 EN 61021-2:1997Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE 2 laminations

Trim. IV 29.100.10 29.180

2516 EN 61028:1993/A1:1995 Electrical measuring instruments - X-Y recorders Trim. IV 17.220.20

2517 IEC 61029-2-7:1993Safety of transportable motor-operated electric tools - Part 2: Particular requirements for diamond saws with water supply

GOST CEI 1029-2-7-2002 Trim. IV 25.140.20 25.080.60

2518 EN 61033:2006Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate

Trim. IV 17.220.99 29.035.01

2519 EN 61039:2008 Classification of insulating liquids Trim. IV 29.040.10

2520 EN 61056-1:2012General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test

SM SR EN 61056-1:2013 Trim. IV 29.220.20

2521 EN 61056-2:2012General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking

SM SR EN 61056-2:2013 Trim. IV 29.220.20

2522 EN 61058-1-1:2016 Switches for appliances - Part 1-1: Requirements for mechanical switches Trim. IV 03.100.393 35.240.453

2523 EN 61058-1-2:2016 Switches for appliances - Part 1-2: Requirements for electronic switches Trim. IV 03.100.394 35.240.454

2524 EN 61058-2-6:2016Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery

Trim. IV 03.100.323 35.240.383

2525 EN 61061-1:2006Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements

Trim. IV 17.220.99 29.035.01

Pagina 128 din 170





2526EN 61061-2:2001/A1:2001

Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test

Trim. IV 17.220.99 29.035.01

2527 EN 61061-3-1:1998Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Sheets produced from beech veneer

Trim. IV 17.220.99 29.035.01

2528 EN 61061-3-2:2001Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Rings produced from beech veneer

Trim. IV 17.220.99 29.035.01

2529 EN 61067-2:1997 Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test Trim. IV 29.035.30

2530 EN 61067-3-1:1995Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes

Trim. IV 29.040.20

2531 EN 61068-1:1997Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements

Trim. IV 29.035.20

2532 EN 61068-2:1997 Specification for polyester fibre woven tapes - Part 2: Methods of test Trim. IV 29.035.20

2533 EN 61068-3-1:1995Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms

Trim. IV 29.040.20

2534 EN 61069-1:2016Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts

SM SR EN 61069-1:2012 Trim. IV 03.100.324 35.240.384

2535 EN 61069-2:2016Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology

SM SR EN 61069-2:2012 Trim. IV 03.100.325 35.240.385

2536 EN 61069-3:2016Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality

SM SR EN 61069-3:2012 Trim. IV 03.100.326 35.240.386

2537 EN 61069-4:2016Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance

SM SR EN 61069-4:2012 Trim. IV 03.100.145 35.240.205

2538 EN 61069-5:2016Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability

SM SR EN 61069-5:2012 Trim. IV 03.100.395 35.240.455

2539 EN 61069-6:2016Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability

SM SR EN 61069-6:2012 Trim. IV 03.100.396 35.240.456

2540 EN 61069-7:2016Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety

SM SR EN 61069-7:2012 Trim. IV 03.100.397 35.240.457

2541 EN 61069-8:2016Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties

SM SR EN 61069-8:2012 Trim. IV 03.100.398 35.240.458

Pagina 129 din 170





2542 EN 61076-3-110:2016Connectors for electronic equipment - Product requirements – Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz

Trim. IV 03.100.146 35.240.206

2543 EN 61078:2016 Reliability block diagrams SM SR EN 61078:2012 Trim. IV 03.100.147 35.240.207

2544 EN 61083-2:2013Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents

Trim. IV 17.220.20 19.080

2545 EN 61086-1:2004Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements

Trim. IV 29.035.20

2546 EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test Trim. IV 29.035.20

2547 EN 61094-1:2000 Measurement microphones - Part 1: Specifications for laboratory standard microphones Trim. IV 17.140.50

2548 EN 61094-2:2009Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique

Trim. IV 17.140.50

2549 EN 61094-3:2016Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique

Trim. IV 03.100.399 35.240.459

2550 EN 61094-4:1995 Measurement microphones - Part 4: Specifications for working standard microphones Trim. IV 17.140.50 33.160.50

2551 EN 61094-5:2016Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison

Trim. IV 03.100.400 35.240.460

2552 EN 61094-6:2005Measurement microphones - Part 6: Electrostatic actuators for determination of frequency response

Trim. IV 17.140.50

2553 EN 61094-8:2012Measurement microphones — Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison

Trim. IV 17.140.50

2554 EN 61099:2010 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes Trim. IV 29.040

2555 EN 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity Trim. IV 03.120.30 19.020 21.020

2556 EN 61125:1993/A1:2004Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability

Trim. IV 17.220.99 29.040.10

2557 EN 61148:2012 Terminal markings for valve device stacks and assemblies and for power conversion equipment Trim. IV 29.200

2558 EN 61160:2005 Design review Trim. IV 03.100.40 03.120.01

2559EN 61162-450:2011/A1:2016

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection

Trim. IV 03.100.670 35.240.730

2560 EN 61163-1:2006 Reliability stress screening - Part 1: Repairable assemblies manufactured in lots Trim. IV 03.120.01 03.120.30 21.020

Pagina 130 din 170





2561 EN 61164:2004 Reliability growth - Statistical test and estimation methods Trim. IV 03.120.01 03.120.30

2562 EN 61165:2006 Application of Markov techniques Trim. IV 03.120.01 03.120.30 21.020

2563 EN 61169-58:2016Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 Ω (type SBMA)

Trim. IV 03.100.148 35.240.208

2564 EN 61169-8:2007Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC)

Trim. IV 29.120.20

2565 EN 61175-1:2015Industrial systems, installations and equipment and industrial products - Designation of signals - Part 1: Basic rules

Trim. IV 29.020

2566 EN 61180:2016High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment

SM SR EN 61180-1:2012 SM SR EN 61180-2:2013

Trim. IV 03.100.327 35.240.387

2567 EN 61181:2007Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment

Trim. IV 29.040.10 29.180

2568 EN 61181:2007/A1:2012Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment

Trim. IV 29.040

2569 EN 61189-2-719:2016Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-719: Test methods for materials for interconnection structures - Relative permittivity and loss tangent (500 MHz to 10 GHz)

Trim. IV 03.100.328 35.240.388

2570 EN 61189-5-1:2016Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies

Trim. IV 03.100.401 35.240.461

2571 EN 61197:1994 Insulating liquids - Linear flame propagation - Test method using a glass-fibre tape Trim. IV 29.040.20

2572 EN 61198:1994 Mineral insulating oils - Methods for the determination of 2-furfural and related compounds Trim. IV 29.040.20

2573 EN 61203:1994Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment

Trim. IV 29.040.20 29.180

2574 EN 61204:1995/A1:2001 Low-voltage power supply devices, d.c. output - Performance characteristics Trim. IV 29.200

2575 EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers Trim. IV 19.080 71.040.40

2576 EN 61207-7:2013 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers Trim. IV 19.040 71.040.40

2577EN 61207-7:2013/AC:2015

Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers Trim. IV 19.040 71.040.40

2578 EN 61212-3-1:2013Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes

Trim. IV 29.035.01

Pagina 131 din 170





2579 EN 61212-3-2:2013Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes

Trim. IV 29.035.01

2580 EN 61212-3-3:2006Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods

Trim. IV 29.035.01

2581 EN 61215-1-1:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type SM SR EN 61215:2013 Trim. IV 03.100.652 35.240.712

2582 EN 61221:2004Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications

Trim. IV 29.120 75.120

2583 EN 61226:2010Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions

Trim. IV 27.120.20

2584 EN 61231:2010 International lamp coding system (ILCOS) Trim. IV 29.140

2585 EN 61231:2010/A1:2013 International lamp coding system (ILCOS) Trim. IV 29.140

2586 EN 61234-2:1998Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets

Trim. IV 29.035.01

2587 EN 61243-1:2005Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

Trim. IV 29.240.99

2588EN 61243-1:2005/A1:2010

Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

Trim. IV 29.240.99

2589 EN 61247:1997 PM-cores made of magnetic oxides and associated parts - Dimensions Trim. IV 29.100.10

2590 EN 61248-1:1997Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification

Trim. IV 29.180

2591 EN 61248-2:1997Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure

Trim. IV 29.180

2592 EN 61248-3:1997Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure

Trim. IV 29.180

2593 EN 61248-4:1997Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure

Trim. IV 29.180

2594 EN 61248-5:1997Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure

Trim. IV 29.180

2595 EN 61248-6:1997Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure

Trim. IV 29.180

Pagina 132 din 170





2596 EN 61248-7:1997Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure

Trim. IV 29.180

2597 EN 61252:1995/A1:2001 Electroacoustics - Specifications for personal sound exposure meters Trim. IV 17.140.50

2598 EN 61260:1995/A1:2001 Electroacoustics - Octave-band and fractional-octave-band filters Trim. IV 17.140.50

2599 EN 61260-2:2016 Electroacoustics - Octave-band and fractional-octave-band filters - Part SM SR EN 61260:2013 Trim. IV 03.100.653 35.240.713

2600 EN 61260-3:2016 Electroacoustics - Octave-band and fractional-octave-band filters - Part SM SR EN 61260:2013 Trim. IV 03.100.654 35.240.714

2601 EN 61262-7:1995Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function

GOST CEI 61262.7-2002 Trim. IV 11.040.50

2602 EN 61300-2-47:2016Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks

Trim. IV 03.100.402 35.240.462

2603 EN 61302:1995Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test

Trim. IV 29.040.20

2604EN 61303:1995/AC:2016-07

Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance

Trim. IV 03.100.578 35.240.638

2605 EN 61329:1996Sound system equipment - Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production)

Trim. IV 17.140.50

2606 EN 61332:2005 Soft ferrite material classification Trim. IV 29.100.10

2607 EN 61333:1998 Marking on U and E ferrite cores Trim. IV 29.040.10 29.100.10

2608 EN 61334-3-22:2001Distribution automation using distribution line carrier systems - Part 3-22: Mains signaling requirements - MV phase-to-earth and screen-to-earth intrusive coupling devices

Trim. IV 29.240.20 33.200

2609 EN 61334-4-33:1998Distribution automation using distribution line carrier systems - Part 4-33: Data communication protocols - Data link layer - Connection oriented protocol

Trim. IV 29.240.20 33.200

2610 EN 61334-4-61:1998Distribution automation using distribution line carrier systems - Part 4-61: Data communication protocols - Network layer - Connectionless protocol

Trim. IV 29.240.20 33.200

2611 EN 61334-6:2000 Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule Trim. IV 29.240.20 33.200

2612 EN 61340-2-1:2015Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge

SM EN 61340-2-1:2015 Trim. IV 17.220.99 29.020

2613 EN 61340-2-3:2016Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation

SM EN 61340-2-3:2015 Trim. IV 03.100.329 35.240.389

2614EN 61340-4-1:2004/A1:2015

Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors

Trim. IV 17.220.99 59.080.60

Pagina 133 din 170





2615EN 61340-4-4:2012/A1:2015

Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

Trim. IV 17.220.99 29.020 55.080

2616 EN 61340-4-6:2015 Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps Trim. IV 17.220.99 29.020

2617 EN 61340-4-8:2015Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding - Bags

Trim. IV 17.200.99 29.020

2618 EN 61340-4-9:2016 Electrostatics - Part 4-9: Standard test methods for specific applications - Garments Trim. IV 03.100.403 35.240.463

2619 EN 61340-5-1:2016Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements

SM EN 61340-5-1:2015 Trim. IV 03.100.150 35.240.210

2620 CLC/TR 61340-5-2:2008Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide

Trim. IV 17.220.99 29.020

2621 EN 61340-5-3:2015Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices

SM EN 61340-5-3:2015 Trim. IV 17.220.99 29.020

2622 EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps Trim. IV 29.140.20

2623EN 61347-2-1:2001/A1:2006

Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)

Trim. IV 29.140.99

2624EN 61347-2-1:2001/A2:2014

Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)

Trim. IV 29.140.99

2625 EN 61391-1:2006Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response

Trim. IV 17.140.50

2626 EN 61391-2:2010Ultrasonics - Pulse-echo scanners - Part 2: Measurement of maximum depth of penetration and local dynamic range

Trim. IV 17.140.50

2627EN 61400-1:2005/A1:2010

Wind turbines - Part 1: Design requirements Trim. IV 27.180

2628EN 61400-12-2:2013/AC:2016-10

Wind turbines - Part 12-2: Power performance of electricity-producing wind turbines based on nacelle anemometry

Trim. IV 03.100.330 35.240.390

2629 EN 61400-23:2014 Wind turbines - Part 23: Full-scale structural testing of rotor blades Trim. IV 27.180

2630 EN 61400-25-2:2015Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models

SM EN 61400-25-2:2015 Trim. IV 27.180

2631 EN 61400-25-3:2015Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models

SM EN 61400-25-3:2015 Trim. IV 27.180

2632 EN 61400-27-1:2015 Wind turbines - Part 27-1: Electrical simulation models - Wind turbines Trim. IV 27.180

2633 EN 61427-1:2013Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 1: Photovoltaic off-grid application

SM SR EN 61427:2013 Trim. IV 27.160 29.220.20

2634 EN 61427-2:2015Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications

Trim. IV 29.220.20

Pagina 134 din 170





2635 EN 61434:1996Secondary cells and batteries containing alkaline or other non-acid electrolytes - Guide to the designation of current in alkaline secondary cell and battery standards

Trim. IV 29.220.30

2636EN 61439-5:2015/AC:2015

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

Trim. IV 29.130.20

2637 EN 61442:2005Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)

Trim. IV 19.080 29.060.20

2638 EN 61466-1:2016Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1: Standard strength classes and end fittings

SM SR EN 61466-1:2013 Trim. IV 03.100.579 35.240.639

2639EN 61466-2:1998/A1:2002

Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV - Part 2: Dimensional and electrical characteristics

Trim. IV 29.080.10 29.240.20

2640 EN 61467:2008Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests

Trim. IV 29.080.10 29.240.20

2641 CLC/TR 61491:2010Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives

Trim. IV 33.200 35.240.50

2642 ISO 6150:1988Pneumatic fluid power -- Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) -- Plug connecting dimensions, specifications, application guidelines and testing

GOST 30539-97 (ISO 6150-88)

Trim. IV 23.100.40

2643 EN 61500:2011Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions

Trim. IV 27.120.20

2644 EN 61513:2013Nuclear power plants - Instrumentation and control important to safety - General requirements for systems

SM IEC 61513:2016 Trim. IV 27.120.20

2645 EN 61515:2016 Mineral insulated metal-sheathed thermocouple cables and thermocouples SM EN 61515:2015 Trim. IV 03.100.495 35.240.555

2646 EN 61596:1997Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions

Trim. IV 29.100.10 29.180

2647 EN 61605:2005 Fixed inductors for use in electronic and telecommunication equipment - Marking codes Trim. IV 29.100.10

2648 EN 61609:1999 Microwave ferrite components - Guide for the drafting of specifications Trim. IV 29.030 29.100.10

2649 EN 61619:1997Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography

Trim. IV 29.040.10

2650 EN 61628-1:1997Corrugated pressboard and presspaper for electrical purposes - Part 1: Definitions, designations and general requirements

Trim. IV 29.035.10

2651 EN 61628-2:1999 Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test Trim. IV 29.035.10

2652EN 61628-2:1999/A1:2007

Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test Trim. IV 29.035.10

2653 EN 61629-1:1996Aramid pressboard for electrical purposes - Part 1: Definitions, designations and general requirements

Trim. IV 29.040.20

2654 EN 61629-2:1996 Aramid pressboard for electrical purposes - Part 2: Methods of test Trim. IV 29.040.20

2655 EN 61631:2001 Test method for the mechanical strength of cores made of magnetic oxides Trim. IV 29.100.10

Pagina 135 din 170





2656 CLC/TS 61643-12:2009Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles

Trim. IV 29.240 29.240.10

2657 EN 61660-1:1997Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents

Trim. IV 29.240.01

2658 EN 61660-2:1997Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects

Trim. IV 29.240.01

2659 EN 61672-3:2013 Electroacoustics - Sound level meters - Part 3: Periodic tests Trim. IV 17.140.50

2660 EN 61685:2001 Ultrasonics - Flow measurement systems - Flow test object Trim. IV 17.140.50

2661 EN 61703:2016Mathematical expressions for reliability, availability, maintainability and maintenance support terms

Trim. IV 03.100.152 35.240.212

2662 EN 61710:2013 Power law model - Goodness-of-fit tests and estimation methods Trim. IV 03.120.01 03.120.30

2663 EN 61772:2013 Nuclear power plants - Control rooms - Application of visual display units (VDUs) Trim. IV 27.120.20

2664 EN 61773:1996 Overhead lines - Testing of foundations for structures Trim. IV 29.240.20

2665 EN 61784-3:2016Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions

Trim. IV 03.100.496 35.240.556

2666 EN 61788-1:2007Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors

Trim. IV 17.220 29.050

2667 EN 61788-10:2006Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method

Trim. IV 29.050

2668 EN 61788-11:2011Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors

Trim. IV 17.220 29.050

2669 EN 61788-12:2013Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires

Trim. IV 29.050

2670 EN 61788-13:2012Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites

Trim. IV 17.220 29.050

2671 EN 61788-14:2010Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices

Trim. IV 29.050

2672 EN 61788-15:2011Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies

Trim. IV 29.050

2673 EN 61788-16:2013Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies

Trim. IV 17.220.20 29.050

2674 EN 61788-17:2013Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films

Trim. IV 17.220.20 29.050

2675 EN 61788-18:2013Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors

Trim. IV 29.050

2676 EN 61788-19:2014Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors

Trim. IV 29.050 77.040.10

Pagina 136 din 170





2677 EN 61788-2:2007Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors

Trim. IV 17.220 29.050

2678 EN 61788-21:2015Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance

Trim. IV 17.220 29.050 77.040.10

2679 EN 61788-3:2006Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors

Trim. IV 17.220 29.050

2680 EN 61788-5:2013Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires

Trim. IV 17.220.20 29.050

2681 EN 61788-7:2006Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

Trim. IV 17.220 29.050

2682 EN 61788-8:2010Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method

Trim. IV 17.220

2683 EN 61788-9:2005Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors

Trim. IV 17.220 29.050

2684 EN 61797-1:1996Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores

Trim. IV 29.180

2685 CLC/TR 61800-6:2007Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings

Trim. IV 29.130

2686 EN 61803:1999/A2:2016Determination of power losses in high-voltage direct current (HVDC) converter stations with line commutated converters

Trim. IV 03.100.331 35.240.391

2687 EN 61810-2-1:2011Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values

Trim. IV 29.120.70

2688 EN 61810-3:2015Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts

Trim. IV 29.120.70

2689 EN 61810-7:2006 Electromechanical elementary relays - Part 7: Test and measurement procedures Trim. IV 29.120.70

2690 EN 61811-1:2015Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification

SM SR EN 61811-1:2013 Trim. IV 29.120.70

2691 EN 61828:2001Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmitted fields

Trim. IV 17.140.50

2692 EN 61830:1998 Microwave ferrite components - Measuring methods for major properties Trim. IV 29.100.10

2693 CLC/TS 61836:2009 Solar photovoltaic energy systems - Terms, definitions and symbols Trim. IV 27.160

2694 EN 61839:2014 Nuclear power plants - Design of control rooms - Functional analysis and assignment Trim. IV 27.120.20 29.120.10

2695 EN 61842:2002 Microphones and earphones for speech communications Trim. IV 17.140.50 33.160.50

2696 EN 61843:1997Measuring method for the level of intermodulation products generated in a gyromagnetic device

Trim. IV 29.100.10

Pagina 137 din 170





2697 CLC/TS 61850-80-1:2010Communication networks and systems for power utility automation - Part 80-1: Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104

Trim. IV 33.200

2698 EN 61853-1:2011Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating

Trim. IV 27.160

2699 EN 61857-21:2009Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose models - Wire-wound applications

Trim. IV 29.080.30

2700 EN 61858-1:2014Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS

SM SR EN 61858:2013 Trim. IV 29.080.30

2701 EN 61858-2:2014Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS

Trim. IV 29.080.30

2702 EN 61868:1999 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures Trim. IV 17.220.99 29.040.10

2703EN 61869-4:2014/AC:2014

Instrument transformers - Part 4: Additional requirements for combined transformers Trim. IV 17.220.20

2704EN 61869-5:2011/AC:2015

Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers Trim. IV 17.220.20

2705 EN 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide SM IEC 61882:2016 Trim. IV 03.100.655 35.240.715

2706 EN 61915-1:2008Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles

Trim. IV 29.130.20

2707 EN 61915-2:2012Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for starters and similar equipment

Trim. IV 29.130

2708 EN 61937-7:2005Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats

33.160.01

2709EN 61937-7:2005/A1:2016

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats (TA 4)

Trim. IV 33.160.01 35.240.464

2710 CLC/TS 61949:2008Ultrasonics - Field characterization - In situ exposure estimation in finite-amplitude ultrasonic beams

Trim. IV 17.140.50

2711 EN 61954:2011 Static VAR compensators (SVC) - Testing of thyristor valves Trim. IV 29.240.99 31.080.20

2712 EN 61954:2011/A1:2013 Static VAR compensators (SVC) - Testing of thyristor valves Trim. IV 29.240.99 31.080.20

2713 EN 61959:2004Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries

Trim. IV 29.220.99

2714 EN 61966-12-1:2011Multimedia systems and equipment - Colour measurement and management - Part 12-1: Metadata for identification of colour gamut (Gamut ID)

Trim. IV 17.180.20 33.160

2715 EN 61966-12-2:2014Multimedia systems and equipment - Colour measurement and management - Part 12-2: Simple metadata format for identification of colour gamut

Trim. IV 17.180.20 33.160

Pagina 138 din 170





2716 EN 61966-2-4:2006Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC

33.160.40

2717EN 61966-2-4:2006/A1:2016

Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC

Trim. IV 33.160.40 35.240.465

2718 EN 61966-2-5:2008Multimedia systems and equipment - Colour measurement and management - Part 2-5: Colour management - Optional RGB colour space - opRGB

Trim. IV 17.180.20 33.160.60

2719 EN 61966-6:2006Multimedia systems and equipment - Colour measurement and management - Part 6: Front projection displays

Trim. IV 17.180.20 33.160.60

2720 CLC/TS 61970-2:2005 Energy management system application program interface (EMS-API) - Part 2: Glossary Trim. IV 33.200

2721 EN 61975:2010 High-voltage direct current (HVDC) installations - System tests Trim. IV 29.130.10 31.080.01

2722 EN 61987-12:2016 Industrial- Process Measurement and Control - Data Structures and Trim. IV 03.100.656 35.240.716

2723 EN 61987-13:2016 Industrial-process measurement and control - Data structures and Trim. IV 03.100.657 35.240.717

2724 EN 61987-14:2016Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchange

Trim. IV 03.100.580 35.240.640

2725 EN 62004:2009 Thermal-resistant aluminium alloy wire for overhead line conductor Trim. IV 17.220.20 29.240.20

2726 EN 62006:2011 Hydraulic machines - Acceptance tests of small hydroelectric installations Trim. IV 27.140

2727 EN 62011-2:2004Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test

Trim. IV 29.035.20

2728 EN 62011-3-1:2003

Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Tubes and rods of rectangular and hexagonal cross-section

Trim. IV 29.035.20

2729 EN 62019:1999Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

Trim. IV 29.120.50

2730 EN 62019:1999/A1:2003Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

Trim. IV 29.120.50

2731EN 62019:1999/A11:2005

Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

Trim. IV 29.120.50

2732EN 62019:1999/A12:2014

Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

Trim. IV 29.120.50

2733 EN 62021-1:2003 Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration Trim. IV 29.040.10 29.180

2734 EN 62021-2:2007 Insulating liquids - Determination of acidity - Part 2: Colourimetric titration Trim. IV 29.040.10

Pagina 139 din 170





2735 EN 62021-3:2014 Insulating liquids - Determination of acidity - Part 3: Test methods for non mineral insulating oils Trim. IV 29.040.10

2736 EN 62024-1:2008High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor

Trim. IV 29.100.10

2737 EN 62024-2:2009High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters

Trim. IV 29.100.10

2738 EN 62025-1:2007High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment

Trim. IV 29.100.10

2739 EN 62025-2:2005High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics

Trim. IV 29.100.10

2740 EN 62041:2010Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements

Trim. IV 29.180 33.100

2741 EN 62044-1:2002 Cores made of soft magnetic materials - Measuring methods - Part 1: Generic specification Trim. IV 29.100.10

2742 EN 62044-2:2005Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level

Trim. IV 29.100.10

2743 EN 62044-3:2001Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level

Trim. IV 29.030 29.100.10

2744 EN 62047-25:2016Semiconductor devices - Micro-electromechanical devices - Part 25: Silicon based MEMS fabrication technology - Measurement method of pull-press and shearing strength of micro bonding area

Trim. IV 03.100.153 35.240.213

2745 EN 62080:2009/A2:2015 Sound signalling devices for household and similar purposes Trim. IV 29.120

2746 EN 62110:2009/AC:2015Electric and magnetic field levels generated by AC power systems - Measurement procedures with regard to public exposure

Trim. IV 17.200.20 29.240

2747EN 62146-1:2014/A1:2016

Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General Trim. IV 03.100.332 35.240.392

2748 EN 62199:2004 Bushings for d.c. application Trim. IV 29.080.20

2749 EN 62209-1:2016Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz)

SM SR EN 62209-1:2013 Trim. IV 03.100.154 35.240.214

2750 EN 62241:2015 Nuclear power plants - Main control room - Alarm functions and presentation Trim. IV 27.120.20

2751 EN 62264-5:2016 Enterprise-control system integration - Part 5: Business to manufacturing transactions Trim. IV 03.100.155 35.240.215

2752EN 62271-1:2008/A1:2011

High-voltage switchgear and controlgear - Part 1: Common specifications Trim. IV 29.130.10 29.130.99

2753 EN 62271-100:2009 High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers SM CEI 62271-100:2014 Trim. IV 29.130.10

Pagina 140 din 170





2754EN 62271-100:2009/A1:2012

High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers Trim. IV 29.130.10

2755 EN 62271-101:2013 High-voltage switchgear and controlgear - Part 101: Synthetic testing SM CEI 62271-101:2014 Trim. IV 29.130.10

2756EN 62271-102:2002/AC:2014

High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches

Trim. IV 29.130.10 29.130.99

2757 EN 62271-103:2011High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV

SM CEI 62271-103:2014 Trim. IV 29.130.10

2758EN 62271-200:2012/AC:2015

High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

Trim. IV 29.130.10

2759 EN 62271-201:2014High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

SM EN 62271-201:2014 Trim. IV 29.130.10

2760EN 62271-202:2014/AC:2015

High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation

Trim. IV 29.130.10

2761 CLC/TR 62271-208:2010High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations

Trim. IV 29.130.10

2762EN 62271-211:2014/AC:2015

High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV

Trim. IV 29.130.10

2763 CLC/TS 62271-304:2008High-voltage switchgear and controlgear - Part 304: Design classes for indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and including 52 kV to be used in severe climatic conditions

Trim. IV 29.130.10

2764EN 62305-1:2011/AC:2016-11

Protection against lightning - Part 1: General principles Trim. IV 03.100.156 35.240.216

2765 EN 62317-12:2016 Ferrite cores - Dimensions - Part 12: Ring cores Trim. IV 03.100.158 35.240.218

2766 EN 62317-2:2010Ferrite cores - Dimensions - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications

Trim. IV 29.100.10

2767 EN 62317-5:2015Ferrite cores - Dimensions - Part 5: EP-cores and associated parts for use in inductors and transformers

Trim. IV 29.100.10

2768 EN 62325-351:2016Framework for energy market communications - Part 351: CIM European market model exchange profile

SM EN 62325-351:2016 Trim. IV 03.100.406 35.240.466

2769EN 62325-451-2:2014/AC:2016-08

Framework for energy market communications - Part 451-2: Scheduling business process and contextual model for CIM European market

Trim. IV 03.100.497 35.240.557

2770 EN 62325-451-6:2016Framework for energy market communications - Part 451-6: Publication of information on market, contextual and assembly models for European style market

Trim. IV 03.100.407 35.240.467

2771 EN 62329-1:2006 Heat shrinkable moulded shapes - Part 1: Definitions and general requirements Trim. IV 29.035.20

2772 EN 62343-1:2016 Dynamic modules - Part 1: Performance standards - General conditions Trim. IV 03.100.581 35.240.641

Pagina 141 din 170





2773 EN 62343-3-1:2016 Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers SM SR EN 62343-3-1:2013 Trim. IV 03.100.582 35.240.642

2774 EN 62343-3-2:2016 Dynamic modules - Part 3-2: Performance specification templates - Optical channel monitor Trim. IV 03.100.583 35.240.643

2775 EN 62343-4-1:2016Dynamic modules - Part 4-1: Software and hardware interface - 1 x 9 wavelength selective switch

Trim. IV 03.100.671 35.240.731

2776 EN 62358:2012 Ferrite cores - Standard inductance factor for gapped cores and its tolerance Trim. IV 29.100.10

2777 EN 62359:2011Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields

Trim. IV 17.140.50

2778 EN 62361-100:2016Power systems management and associated information exchange - Interoperability in the long term - Part 100: CIM profiles to XML schema mapping

Trim. IV 03.100.408 35.240.468

2779 CLC/TS 62367:2005Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line)

Trim. IV 35.020

2780 EN 62386-210:2011Digital addressable lighting interface - Part 210: Particular requirements for control gear - Sequencer (device type 9)

Trim. IV 29.140.50 29.140.99

2781 EN 62424:2016Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools

SM EN 62424:2016 Trim. IV 25.040.40 35.240.50

2782 EN 62433-4:2016EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity modelling (ICIM-CI)

Trim. IV 03.100.333 35.240.393

2783 EN 62442-1:2011Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear

Trim. IV 29.140.99

2784 EN 62471-5:2015 Photobiological safety of lamps and lamp systems - Part 5: Image projectors Trim. IV 29.140

2785 EN 62493:2015 Assessment of lighting equipment related to human exposure to electromagnetic fields SM SR EN 62493:2012 Trim. IV 29.020 29.140

2786 EN 62559-2:2015Use case methodology - Part 2: Definition of the template for use cases, actor list and requirements list

Trim. IV 29.020

2787 EN 62560:2012/AC:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Trim. IV 29.140.30

2788 EN 62566:2014Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions

Trim. IV 27.120.20

2789 EN 62580-1:2016Electronic railway equipment - On-board multimedia and telematics subsystems for railways - Part 1: General architecture

Trim. IV 03.100.160 35.240.220

2790EN 62586-2:2014/AC:2014

Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements

Trim. IV 17.220.20

2791 EN 62610-5:2016 Mechanical structures for electrical and electronic equipment - Thermal Trim. IV 03.100.659 35.240.719

2792EN 62612:2013/AC:2016-10

Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements

Trim. IV 03.100.334 35.240.394

Pagina 142 din 170





2793 EN 62618:2016Radiation protection instrumentation - Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection of illicit trafficking of radioactive material

Trim. IV 03.100.335 35.240.395

2794EN 62625-1:2013/AC:2016-10

Electronic railway equipment - On board driving data recording system - Part 1: System specification

Trim. IV 03.100.336 35.240.396

2795 EN 62625-2:2016Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing

Trim. IV 03.100.410 35.240.470

2796 EN 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials - Part 3-1: Trim. IV 03.100.660 35.240.720

2797 EN 62639:2012 Fluorescent induction lamps - Performance specification Trim. IV 29.140.30

2798HD 62640:2015/ A11:2016

Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses

Trim. IV 03.100.679 35.240.739

2799 EN 62660-3:2016Secondary lithium-ion cells for the propulsion of electric road vehicles -Part 3: Safety requirements

Trim. IV 03.100.162 35.240.222

2800 CLC/TR 62662:2011Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials

Trim. IV 29.080.10

2801 EN 62670-2:2015 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement Trim. IV 27.160

2802 EN 62673:2013 Methodology for communication network dependability assessment and assurance Trim. IV 03.120.01

2803 EN 62680-1-1:2015Universal Serial Bus interfaces for data and power - Part 1-1: Universal Serial Bus interfaces - Common components - USB Battery Charging Specification, Revision 1.2 (TA 14)

Trim. IV 29.220 33.120 35.200

2804 EN 62680-1-3:2016Universal serial bus interfaces for data and power - Part 1-3: UniversalSerial Bus interfaces - Common components - USB Type-CTM cable and connector specification

Trim. IV 03.100.163 35.240.223

2805 EN 62680-2-1:2015Universal Serial Bus interfaces for data and power - Part 2-1: Universal Serial Bus Specification, Revision 2.0 (TA 14)

Trim. IV 29.220 33.120 35.200

2806 EN 62680-2-2:2015Universal Serial Bus interfaces for data and power - Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14)

Trim. IV 29.220 33.120 35.200

2807 EN 62680-2-3:2015Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (TA 14)

Trim. IV 29.220 33.120 35.200

2808 EN 62694:2016Radiation protection instrumentation - Backpack-type radiation detector (BRD) for the detection of illicit trafficking of radioactive material

Trim. IV 03.100.337 35.240.397

2809 EN 62702-1-1:2016 Audio Archive System - Part 1-1: DVD disk and data migration for long Trim. IV 03.100.661 35.240.721

2810 EN 62716:2013/AC:2014 Photovoltaic (PV) modules - Ammonia corrosion testing Trim. IV 27.160

2811 EN 62733:2015 Programmable components in electronic lamp controlgear - General and safety requirements Trim. IV 29.140.99

2812 EN 62739-2:2016Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method for metal materials with surface processing

Trim. IV 03.100.338 35.240.398

Pagina 143 din 170





2813 EN 62740:2015 Root cause analysis (RCA) Trim. IV 03.120.01

2814 EN 62741:2015 Demonstration of dependability requirements - The dependability case Trim. IV 03.120.01 21.020

2815 EN 62747:2014/AC:2015Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems

Trim. IV 29.200 29.240

2816 EN 62756-1:2015 Digital load side transmission lighting control (DLT) - Part 1: Basic requirements Trim. IV 29.140.99

2817 EN 62759-1:2015Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units

Trim. IV 27.160

2818 EN 62772:2016Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1000 V and d.c. voltage greater than 1500VDefinitions, test methods and acceptance criteria

Trim. IV 03.100.164 35.240.224

2819 EN 62779-3:2016Semiconductor devices - Semiconductor interface for human body communication - Part 3: Functional type and its operational conditions

Trim. IV 03.100.662 35.240.722

2820 EN 62788-1-2:2016 Measurement procedures for materials used in photovoltaic modules - Trim. IV 03.100.663 35.240.723

2821 EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests Trim. IV 27.160

2822 EN 62803:2016Transmitting equipment for radiocommunication - Frequency response of optical-to-electric conversion device in high-frequency radio over fibre systems - Measurement method

Trim. IV 03.100.339 35.240.399

2823 EN 62808:2016Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices

Trim. IV 03.100.411 35.240.471

2824 EN 62811:2015AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency squarewave operation

Trim. IV 29.140.99

2825 EN 62817:2015 Photovoltaic systems - Design qualification of solar trackers Trim. IV 27.160

2826 ISO 6282:1983 Plain bearings -- Metallic thin-walled half bearings -- Determination of the sigma 0,01*-limitGOST 28340-89 (ISO 6282-83)

Trim. IV 21.100.10

2827 EN 62820-1-1:2016 Building intercom systems - Part 1-1: System requirements - General Trim. IV 03.100.165 35.240.225

2828 EN 62822-2:2016Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment

Trim. IV 03.100.412 35.240.472

2829 EN 62823:2015 Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing Trim. IV 29.240.99

2830 EN 62827-1:2016 Wireless Power Transfer - Management - Part 1: Common Components Trim. IV 03.100.166 35.240.226

2831 EN 62841-2-8:2016Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers

Trim. IV 03.100.340 35.240.400

2832EN 62841-2-9:2015/AC:2016-10

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders

Trim. IV 03.100.341 35.240.401

Pagina 144 din 170





2833EN 62841-3-10:2015/AC:2016-07

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines

Trim. IV 03.100.584 35.240.644

2834EN 62841-3-9:2015/AC:2016-09

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

Trim. IV 03.100.413 35.240.473

2835 EN 62852:2015 Connectors for DC-application in photovoltaic systems - Safety requirements and tests Trim. IV 27.160

2836 EN 62858:2015 Lightning density based on lightning location systems (LLS) - General principles Trim. IV 29.020 91.120.40

2837 EN 62864-1:2016Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system

Trim. IV 03.100.167 35.240.227

2838 EN 62870:2015Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements

Trim. IV 29.140.50 93.120

2839 ISO 629:1982 Steel and cast iron -- Determination of manganese content -- Spectrophotometric methodGOST 12348-78 (ISO 629-82)

Trim. IV 77.080.01

2840 ISO 6305-4:1985Railway components -- Technical delivery requirements -- Part 4: Untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings

GOST 16018-79 (ISO 6305-4-85)

Trim. IV 45.080

2841EN ISO 6346:1995/A3:2012

Freight containers - Coding, identification and marking - Amendment 3 (ISO 6346:1995/Amd 3:2012)

Trim. IV 55.180.10

2842 ISO/IEC 6429:1992 Information technology -- Control functions for coded character setsGOST 34.301-91 (ISO 6429-88)

Trim. IV 35.040.10

2843 ISO 6432:2015Pneumatic fluid power -- Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm -- Basic and mounting dimensions

SM GOST ISO 6432:2009 Trim. IV 23.100.20

2844 ISO 6451:1982 Plastics coated fabrics -- Polyvinyl chloride coatings -- Rapid method for checking fusionGOST 29061-91 (ISO 6451-82)

Trim. IV 59.080.40

2845 ISO 6463:1982Animal and vegetable fats and oils -- Determination of butylhydroxyanisole (BHA) and butylhydroxytoluene (BHT) -- Gas-liquid chromatographic method

GOST 30984-2002 (ISO 6463:1982)

Trim. IV 67.200.10

2846 ISO 6466:1983Tobacco and tobacco products -- Determination of dithiocarbamate pesticides residues -- Molecular absorption spectrometric method

SM GOST R 51357:2004 (ISO 6466-83)

Trim. IV 65.160

2847 ISO 647:1974Brown coals and lignites -- Determination of the yields of tar, water, gas and coke residue by low temperature distillation

GOST 3168-93 (ISO 647-74) Trim. IV 73.040

2848 ISO 6483:1980 Earth-moving machinery -- Dumper bodies -- Volumetric ratingGOST 27923-88 (ISO 6483-80)

Trim. IV 53.100

2849 ISO 6485:1980 Earth-moving machinery -- Tractor-scraper -- Volumetric ratingGOST 27920-88 (ISO 6485-80)

Trim. IV 53.100

2850 ISO 6486-1:1999Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food -- Release of lead and cadmium -- Part 1: Test method

SM GOST R ISO 6486-1:2010

Trim. IV 97.040.60 81.060.20 81.040.30

2851 ISO 6486-2:1999Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food -- Release of lead and cadmium -- Part 2: Permissible limits

SM GOST R ISO 6486-2:2010

Trim. IV 97.040.60 81.060.20 81.040.30

2852 ISO 6525:1983 Plain bearings -- Ring type thrust washers made from strip -- Dimensions and tolerancesGOST 28801-90 (ISO 6525-83)

Trim. IV 21.100.10

Pagina 145 din 170





2853 ISO 6565:2015Tobacco and tobacco products -- Draw resistance of cigarettes and pressure drop of filter rods -- Standard conditions and measurement

GOST ISO 6565-2003 Trim. IV 65.160

2854 ISO 6619:1988 Petroleum products and lubricants -- Neutralization number -- Potentiometric titration methodGOST 11362-96 (ISO 6619-88)

Trim. IV 75.080

2855 ISO 6664:1983 Bilberries and blueberries -- Guide to cold storageGOST 31038-2002 (ISO 6664:1983)

Trim. IV 67.080.10

2856 ISO 6665:1983 Strawberries -- Guide to cold storageGOST 31037-2002 (ISO 6665:1983)

Trim. IV 67.080.10

2857 ISO 671:1982 Steel and cast iron -- Determination of sulphur content -- Combustion titrimetric methodGOST 12345-2001 (ISO 671-82, ISO 4935-89)

Trim. IV 77.080.01

2858 ISO 6743-10:1989Lubricants, industrial oils and related products (class L) -- Classification -- Part 10: Family Y (Miscellaneous)

GOST 28549.10-91 (ISO 6743-10-89)

Trim. IV 75.100

2859 ISO 6743-11:1990Lubricants, industrial oils and related products (class L) -- Classification -- Part 11: Family P (Pneumatic tools)

GOST 28549.11-91 (ISO 6743-11-89)

Trim. IV 75.100

2860 ISO 6743-12:1989Lubricants, industrial oils and related products (class L) -- Classification -- Part 12: Family Q (Heat transfer fluids)

GOST 28549.12-91 (ISO 6743-12-89)

Trim. IV 75.100

2861 ISO 6743-2:1981Lubricants, industrial oils and related products (class L) -- Classification -- Part 2: Family F (Spindle bearings, bearings and associated clutches)

GOST 28549.2-90 (ISO 6743-2-81)

Trim. IV 75.100

2862 ISO 6743-7:1986Lubricants, industrial oils and related products (class L) -- Classification -- Part 7: Family M (Metalworking)

GOST 28549.7-90 (ISO 6743-7-86)

Trim. IV 75.100

2863 ISO 6743-8:1987Lubricants, industrial oils and related products (class L) -- Classification -- Part 8: Family R (Temporary protection against corrosion)

GOST 28549.8-90 (ISO 6743-8-87)

Trim. IV 75.100

2864 EN ISO 6781-3:2015Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 3: Qualifications of equipment operators, data analysts and report writers (ISO 6781-3:2015)

Trim. IV 91.120.10

2865 ISO 6949:1988Fruits and vegetables -- Principles and techniques of the controlled atmosphere method of storage

GOST 31001-2002 (ISO 6949:1988)

Trim. IV 67.080.01

2866EN ISO 6978-2:2005/AC:2016

Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy - Technical Corrigendum 2 (ISO 6978-2:2003/Cor 2:2006)

Trim. IV 03.100.185 35.240.245

2867 ISO 7105:1985Liquefied anhydrous ammonia for industrial use -- Determination of water content -- Karl Fischer method

GOST 28326.2-89 (ISO 7105-85)

Trim. IV 71.060.99

2868 ISO 7108:1985 Ammonia solution for industrial use -- Determination of ammonia content -- Titrimetric methodGOST 29237-91 (ISO 7108-85)

Trim. IV 71.060.40

2869 ISO 7172:1988 Furniture -- Tables -- Determination of stabilityGOST 28793-90 (ISO 7172-88)

Trim. IV 97.140

2870 ISO 7241-2:2000 Hydraulic fluid power -- Quick-action couplings -- Part 2: Test methods SM GOST ISO 7241-2:2011 Trim. IV 23.100.40

2871 ISO 7304-1:2016Durum wheat semolina and alimentary pasta -- Estimation of cooking quality of alimentary pasta by sensory analysis -- Part 1: Reference method

GOST ISO 7304-94 Trim. IV 67.060

2872 ISO 7379:1983 Hexagon socket head shoulder screwsGOST 28962-91 (ISO 7379-83)

Trim. IV 21.060.10

Pagina 146 din 170





2873 ISO 7404-4:1988Methods for the petrographic analysis of bituminous coal and anthracite -- Part 4: Method of determining microlithotype, carbominerite and minerite composition

GOST 28823-90 (ISO 7404-4-88)

Trim. IV 73.040

2874 ISO 7410:1983 Fertilizers and soil conditioners -- Final samples -- Practical arrangements GOST ISO 7410-2002 Trim. IV 65.080

2875 ISO 7435:1983 Slotted set screws with long dog pointGOST 1478-93 (ISO 7435-83)

Trim. IV 21.060.10

2876 ISO 7478:1987 Information processing systems -- Data communication -- Multilink procedures SM GOST ISO 7478:2010 Trim. IV 35.100.20

2877 ISO 7546:1983 Earth-moving machinery -- Loader and front loading excavator buckets -- Volumetric ratingsGOST 29290-92 (ISO 7546-83)

Trim. IV 53.100

2878 ISO 76:2006 Rolling bearings -- Static load ratings GOST 18854-94 (ISO 76-87) Trim. IV 21.100.20

2879 ISO 7626-2:2015Mechanical vibration and shock -- Experimental determination of mechanical mobility -- Part 2: Measurements using single-point translation excitation with an attached vibration exciter

GOST ISO 7626-2-94 Trim. IV 17.160

2880 ISO 7626-5:1994Vibration and shock -- Experimental determination of mechanical mobility -- Part 5: Measurements using impact excitation with an exciter which is not attached to the structure

GOST ISO 7626-5-99 Trim. IV 17.160

2881 ISO 764:2002 Horology -- Magnetic resistant watchesGOST 29155-91 (ISO 764-84)

Trim. IV 39.040.10

2882 ISO 7714:2008 Agricultural irrigation equipment -- Volumetric valves -- General requirements and test methods GOST ISO 7714-2004 Trim. IV 65.060.35

2883 EN 772-1:2011+A1:2015 Methods of test for masonry units - Part 1: Determination of compressive strength Trim. IV 91.100.25

2884 ISO 7749-1:1995Agricultural irrigation equipment -- Rotating sprinklers -- Part 1: Design and operational requirements

GOST ISO 7749-1-2004 Trim. IV 65.060.35

2885 ISO 7801:1984 Metallic materials -- Wire -- Reverse bend testGOST 1579-93 (ISO 7801-84)

Trim. IV 77.040.10

2886 ISO 7805-2:1987 Industrial plate screens -- Part 2: Thickness below 3 mm SM GOST ISO 7805-2:2011 Trim. IV 73.120

2887 ISO 7852:1983Earth-moving machinery -- Plough bolt heads -- Shapes and dimensions (excluding thread dimensions)

GOST 29293-92 (ISO 7852-83)

Trim. IV 53.100

2888 ISO 789-11:1996 Agricultural tractors -- Test procedures -- Part 11: Steering capability of wheeled tractorsSM GOST R 51960:2012 (ISO 789-11:1996)

Trim. IV 65.060.10

2889 ISO 789-7:1991 Agricultural tractors -- Test procedures -- Part 7: Axle power determinationGOST 30749-2001 (ISO 789-7-91)

Trim. IV 65.060.10

2890 ISO 7902-2:1998Hydrodynamic plain journal bearings under steady-state conditions -- Circular cylindrical bearings -- Part 2: Functions used in the calculation procedure

GOST ISO 7902-2-2001 Trim. IV 21.100.10

2891 ISO 7905-3:1995Plain bearings -- Bearing fatigue -- Part 3: Test on plain strips of a metallic multilayer bearing material

GOST ISO 7905-3-99 Trim. IV 21.100.10

2892 ISO 7905-4:1995Plain bearings -- Bearing fatigue -- Part 4: Tests on half-bearings of a metallic multilayer bearing material

GOST ISO 7905-4-99 Trim. IV 21.100.10

Pagina 147 din 170





2893 ISO 7918:1995Forestry machinery -- Portable brush-cutters and grass-trimmers -- Cutting attachment guard dimensions

GOST ISO 7918-2002 Trim. IV 65.060.80

2894 ISO 7936:1992Hard coal -- Determination and presentation of float and sink characteristics -- General directions for apparatus and procedures

GOST 4790-93 (ISO 7936-92)

Trim. IV 73.040

2895 EN ISO 7973:2015Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)

Trim. IV 67.060

2896 EN 80369-5:2016Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications

Trim. IV 03.100.61 35.240.121

2897 EN 806-1:2000/A1:2001Specifications for installations inside buildings conveying water for human consumption - Part 1: General

Trim. IV 91.140.60

2898 EN 810:1997Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet

Trim. IV 91.140.30

2899 ISO 811:1981 Textile fabrics -- Determination of resistance to water penetration -- Hydrostatic pressure test GOST 3816-81 (ISO 811-81) Trim. IV 59.080.30

2900 ISO 8152:1984 Earth-moving machinery -- Operation and maintenance -- Training of mechanicsGOST 27928-88 (ISO 8152-84)

Trim. IV 53.100 03.100.30

2901 EN 817:2008 Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications Trim. IV 91.140.70

2902 ISO 8216-2:1986Petroleum products -- Fuels (class F) -- Classification -- Part 2: Categories of gas turbine fuels for industrial and marine applications

GOST 28577.2-90 (ISO 8216-2-86)

Trim. IV 75.160.20

2903 ISO 8216-3:1987Petroleum products -- Fuels (class F) -- Classification -- Part 3: Family L (Liquefied petroleum gases)

GOST 28577.3-90 (ISO 8216-3:1987)

Trim. IV 75.160.30

2904 CR 833:1992 General requirements for a discontinuously laid roofing covering Trim. IV 91.060.20

2905 ISO 8422:2006 Sequential sampling plans for inspection by attributes SM GOST ISO 8422:2009 Trim. IV 03.120.30

2906 ISO 8440:1986 Location of codes in trade documents GOST ISO 8440-2002 Trim. IV 01.140.30

2907 ISO 8443:2010 Rolling bearings -- Radial ball bearings with flanged outer ring -- Flange dimensionsGOST 10058-90 (ISO 1024-84, ISO 8443-86)

Trim. IV 21.100.20

2908 EN 845-1:2013+A1:2016Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets

SM EN 845-1:2014 Trim. IV 03.100.593 35.240.653

2909 EN 845-2:2013+A1:2016 Specification for ancillary components for masonry - Part 2: Lintels SM EN 845-2:2014 Trim. IV 03.100.594 35.240.654

2910 EN 845-3:2013+A1:2016Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork

SM EN 845-3:2014 Trim. IV 03.100.595 35.240.655

2911 ISO 8454:2007Cigarettes -- Determination of carbon monoxide in the vapour phase of cigarette smoke -- NDIR method

SM GOST R 51358:2010 (ISO 8454:2007)

Trim. IV 65.160

2912 ISO 8478:1996 Photography -- Camera lenses -- Measurement of ISO spectral transmittanceGOST 28729-90 (ISO 8478-86)

Trim. IV 37.040.10

2913 CEN/TR 852:2010Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values

Trim. IV 67.250 83.140.30

2914 ISO 8528-9:1995Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations

SM GOST 31349:2008 (ISO 8528-9:1995)

Trim. IV 29.160.40 27.020 17.160

Pagina 148 din 170





2915 ISO 8573-5:2001 Compressed air -- Part 5: Test methods for oil vapour and organic solvent content GOST ISO 8573-5-2006 Trim. IV 71.100.20

2916EN ISO 8589:2010/A1:2014

Sensory analysis - General guidance for the design of test rooms (ISO 8589:2007/Amd 1:2014) Trim. IV 67.240

2917 ISO 8643:1997Earth-moving machinery -- Hydraulic excavator and backhoe loader boom-lowering control device -- Requirements and tests

GOST 30688-2000 (ISO 8643-97)

Trim. IV 53.100

2918EN ISO 8655-4:2002/AC:2009

Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002/Cor 1:2008) Trim. IV 17.060

2919 ISO 8662-11:1999Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 11: Fastener driving tools

SM GOST 30873.11:2008 (ISO 8662-11:1999)

Trim. IV 13.160 25.140.10

2920 ISO 8681:1986 Petroleum products and lubricants -- Method of classification -- Definition of classesGOST 28576-90 (ISO 8681-86)

Trim. IV 75.080

2921 ISO 8716:2001 Road vehicles -- Fifth wheel kingpins -- Strength test SM GOST ISO 8716:2009 Trim. IV 43.040.70

2922 ISO 8717:2000 Commercial road vehicles -- Fifth wheel couplings -- Strength tests SM GOST ISO 8717:2009 Trim. IV 43.040.70

2923 ISO 8718:2001 Road vehicles -- Drawbar couplings and eyes for hinged drawbars -- Strength tests SM GOST ISO 8718:2009 Trim. IV 43.040.70

2924 ISO 8768:1987 Packaging -- Complete, filled transport packages -- Toppling testGOST 25387-82 (ISO 2876-85, ISO 8768-86)

Trim. IV 55.180.40

2925 ISO 8778:2003 Pneumatic fluid power -- Standard reference atmosphere SM GOST ISO 8778:2008 Trim. IV 23.100.01

2926 ISO 8787:1986 Paper and board -- Determination of capillary rise -- Klemm methodGOST 12602-93 (ISO 8787-86)

Trim. IV 85.060

2927 ISO/IEC 8859-2:1999Information technology -- 8-bit single-byte coded graphic character sets -- Part 2: Latin alphabet No. 2

GOST 34.302.2-91 (ISO 8859/2-87)

Trim. IV 35.040.10

2928EN ISO 8968-3:2007/AC:2012

Milk - Determination of nitrogen content - Part 3: Block-digestion method (Semi-micro rapid routine method) - Technical Corrigendum 1 (ISO 8968-3:2004/Cor 1:2011)

Trim. IV 67.100.10

2929 ISO 9021:1988 Motorcycles -- Controls -- Types, positions and functions GOST ISO 9021-2006 Trim. IV 43.140 95.040

2930 EN 9100:2009 Quality Management Systems - Requirements for Aviation, Space and Defense Organizations Trim. IV 03.100.70 03.120.10 49.020

2931 EN 9101:2015Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations

Trim. IV 03.100.70 03.120.10 03.120.20

2932 EN 9110:2015 Quality Management Systems - Requirements for Aviation Maintenance Organizations Trim. IV 03.100.70 03.120.10 49.020

2933 EN 9120:2010 Quality Management Systems - Requirements for Aviation, Space and Defence Distributors Trim. IV 03.100.70 03.120.10 49.020

2934 ISO 9158:1988 Road vehicles -- Nozzle spouts for unleaded gasoline GOST ISO 9158-2002 Trim. IV 75.200

2935 ISO 9159:1988 Road vehicles -- Nozzle spouts for leaded gasoline and diesel fuel GOST ISO 9159-2002 Trim. IV 75.200

2936 ISO 9177-1:2016Mechanical pencils for technical drawings -- Part 1: Classification, dimensions, performance requirements and testing

GOST 19445-93 (ISO 9177-1-89 )

Trim. IV 97.180 01.100.40

Pagina 149 din 170





2937 ISO 9246:1988 Earth-moving machinery -- Crawler and wheel tractor dozer blades -- Volumetric ratingsGOST 29295-92 (ISO 9246-88)

Trim. IV 53.100

2938 ISO 9247:1990 Earth-moving machinery -- Electrical wires and cables -- Principles of identification and marking GOST ISO 9247-2001 Trim. IV 1.070 53.100

2939 ISO 925:1997 Solid mineral fuels -- Determination of carbonate carbon content -- Gravimetric methodGOST 13455-91 (ISO 925-97)

Trim. IV 75.160.10

2940 EN ISO 9295:2015Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015)

Trim. IV 17.140.20 35.020

2941 ISO 9374-1:1989 Cranes -- Information to be provided -- Part 1: GeneralGOST 28792-90 (ISO 9374-1-89)

Trim. IV 53.020.20

2942 ISO 939:1980 Spices and condiments -- Determination of moisture content -- Entrainment methodGOST 28879-90 (ISO 939-80)

Trim. IV 67.220.10

2943 ISO 9512:2002 Cigarettes -- Determination of ventilation -- Definitions and measurement principles GOST ISO 9512-96 Trim. IV 65.160

2944 ISO 9518:1998 Forestry machinery -- Portable chain-saws -- Kickback testGOST 31184-2002 (ISO 9518:1998)

Trim. IV 65.060.80

2945 ISO/TR 9547:1988Programming language processors -- Test methods -- Guidelines for their development and acceptability

GOST ISO/TO 9547-2002 Trim. IV 35.060

2946 ISO 9647:1989Steel and iron -- Determination of vanadium content -- Flame atomic absorption spectrometric method

GOST 12351-2003 (ISO 4942:1988, ISO 9647:1989)

Trim. IV 77.080.01

2947 ISO 3864-2:2016Graphical symbols -- Safety colours and safety signs -- Part 2: Design principles for product safety labels

SM ISO 3864-2:2016 SM ISO 3864-2:2016/A1:2016

Trim. IV 01.070 01.080.20 01.080.10

2948 CEN/TS 99001:2008Business support - Support services provided to small enterprises - Terminology, quality and performance

Trim. IV 03.080.20

2949 EN 997:2012+A1:2015 WC pans and WC suites with integral trap Trim. IV 91.140.70

2950 EN ISO 9972:2015Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:2015)

Trim. IV 91.120.10

2951 EN 998-1:2016 Specification for mortar for masonry - Part 1: Rendering and plastering mortar SM SR EN 998-1:2013 Trim. IV 03.100.122 35.240.182

2952 EN 998-2:2016 Specification for mortar for masonry - Part 2: Masonry mortar SM SR EN 998-2:2013 Trim. IV 03.100.123 35.240.183

2953 prSM 322 Fructe deshidratate îndulcite (etapa 30.00) Trim. IV 67.080.10

2954 prSM 219 Covoare ţesute jacard dublu pluş executate mecanic. Condiţii tehnice (etapa 30.60) Trim. IV 59.080.60

2955 prSM 321 Produse din dovleac. Specificații (etapa 50.20) Trim. IV 67.080.20

2956 prSM 117 Vinuri şi vinuri materie primă tratate. Specificaţii (etapa 50.00) Trim. IV 67.160.10

2957 prSM 154 Vinuri spumante. Specificaţii (etapa 50.00) Trim. IV 67.160.10

2958 prSM 325 Distilatede cereale. Specificaţii (etapa 50.00) Trim. IV

Pagina 150 din 170





2959 SM 152:1996 Vinuri materie primă, vinuri, divinuri, băuturi tari, distilate de vin si alcooluri din fructe. Metoda gaz-cromatografică de determinare a alcoolilor superiori (etapa 90.00)

Trim. IV 67.160.10

2960 SM 215:2002Vinuri materie primă, vinuri, băuturi şi sucuri. Metoda gaz-cromatografică de determinare a acidului sorbic (etapa 90.00)

Trim. IV 67.160.10 67.160.20

2961 prSM 56 Material săditor pomicol. Pomi altoiţi de curmal de China. Condiţii tehnice (etapa 50.92) Trim. IV 65.020.20

2962 prSM 57 Fructe proaspete. Curmal de China. Condiţii tehnice (etapa 50.92) Trim. IV 67.080.10

2963 prSM 238 Torturi, prăjituri şi rulade. Condiţii tehnice generale (etapa 30.20) Trim. IV 67.060

2964 prSM 318Cerinţe generale pentru competența laboratoarelor de încercări de primă parte (din cadrul întreprinderilor) (etapa 40.60)

Trim. IV 03.120.20

2965 prSM 324Document national de aplicare a standardului SM SR EN 206:2016 „Beton Specificație, performanță, producție şi conformitate” (etapa 30.00)

Trim. IV 91.100.30

2966 prSM 323 Lucrări de drumuri. Indicatoare kilometrice (etapa 30.00) Trim. IV 93.080.01

2967 CEN/CLC/TR 14060:2014 Medical device traceability enabled by unique device identification (UDI) Trim. IV 11.040.01

2968CEN/CLC/TR 16832:2015

Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) Trim. IV

13.340.01

2969CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition Trim. IV

77.040.30

2970

CEN/TR 10317:2014

European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)

Trim. IV

71.040.30 77.150.10

2971 CEN/TR 10347:2006 Guidance for forming of structural steels in processing Trim. IV 77.140.10

2972CEN/TR 10350:2013

Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials Trim. IV

77.040.30

2973CEN/TR 10353:2011

Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry Trim. IV

77.080.10

2974CEN/TR 10354:2011

Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry Trim. IV

77.080.10

2975CEN/TR 10362:2014

Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method Trim. IV

77.040.30 77.080.20

2976CEN/TR 12108:2012

Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption

Trim. IV23.040.01 91.140.60

2977 CEN/TR 12401:2009 Dentistry - Guidance on the classification of dental devices and accessories Trim. IV 11.060.01

2978CEN/TR 12872:2014 Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs SM SR CEN/TS 12872:2012 Trim. IV

79.060.01

2979CEN/TR 1295-2:2005

Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design Trim. IV

23.040.01

Pagina 151 din 170





2980CEN/TR 1295-3:2007

Structural design of buried pipelines under various conditions of loading - Part 3: Common method Trim. IV

23.040.01

2981CEN/TR 1295-4:2015

Structural design of buried pipelines under various conditions of loading - Part 4: Parameters for reliability of the design Trim. IV

23.040.01

2982 CEN/TR 13097:2010 Characterization of sludges - Good practice for sludge utilisation in agriculture Trim. IV 13.030.20

2983CEN/TR 13200-2:2005

Spectator facilities - Layout criteria of service area - Part 2: Characteristics and national situations Trim. IV

97.200.10 97.220.10

2984CEN/TR 13205-3:2014

Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data Trim. IV

13.040.30

2985 CEN/TR 13233:2007 Advanced technical ceramics - Notations and symbols Trim. IV 01.060 01.075 81.060.30

2986 CEN/TR 13233:2007/AC:2Advanced technical ceramics - Notations and symbols Trim. IV 01.060 01.075 81.060.30

2987CEN/TR 13259:2013

Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes Trim. IV

25.160.30

2988CEN/TR 13387-1:2015

Child use and care articles - General safety guidelines - Part 1: Safety philosophy and safety assessment Trim. IV

97.190

2989 CEN/TR 13387-2:2015 Child use and care articles - General safety guidelines - Part 2: Chemical hazards Trim. IV 97.190

2990CEN/TR 13387-3:2015 Child use and care articles - General safety guidelines - Part 3: Mechanical hazards Trim. IV

97.190

2991 CEN/TR 13387-4:2015 Child use and care articles - General safety guidelines - Part 4: Thermal hazards Trim. IV 97.190

2992CEN/TR 13387-5:2015 Child use and care articles - General safety guidelines - Part 5: Product information Trim. IV

97.190

2993 CEN/TR 13445-101:2015 Unfired pressure vessels - Example of application Trim. IV 23.020.30

2994CEN/TR 13445-102:2015

Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket supports Trim. IV

23.020.30

2995CEN/TR 13480-7:2002 Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures Trim. IV

23.040.01

2996CEN/TR 13688:2008

Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling Trim. IV

13.030.50 55.020

2997

CEN/TR 13695-2:2004

Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment

Trim. IV

13.020.30 55.020

2998CEN/TR 13910:2010 Packaging - Report on criteria and methodologies for life cycle analysis of packaging Trim. IV

13.020.60 55.020

2999CEN/TR 13930:2009 Rotodynamic pumps - Design of pump intakes - Recommendations for installation of pumps Trim. IV

23.080

3000CEN/TR 13930:2009/AC:2Rotodynamic pumps - Design of pump intakes - Recommendation for installation of pumps Trim. IV

23.080

3001CEN/TR 13931:2009

Rotodynamic pumps - Forces and moments on flanges - Centrifugal, mixed flow and axial flow horizontal and vertical shafts pumps Trim. IV

23.080

Pagina 152 din 170





3002CEN/TR 13931:2009/AC:2

Rotodynamic pumps - Forces and moments on flanges - Centrifugal, mixed flow and axial flow horizontal and vertical shafts pumps Trim. IV

23.080

3003 CEN/TR 13932:2009 Rotodynamic pumps - Recommendations for fitting of inlet and outlet on piping Trim. IV 23.080

3004CEN/TR 13983:2003 Characterizataion of sludges - Good practice for sludge utilisation in land reclamation Trim. IV

13.030.20 13.080.99

3005 CEN/TR 14473:2014 Transportable gas cylinders - Porous materials for acetylene cylinders Trim. IV 23.020.35

3006CEN/TR 14489:2005

Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment Trim. IV

75.120

3007 CEN/TR 14520:2007 Packaging - Reuse - Methods for assessing the performance of a reuse system Trim. IV 13.030.50 55.180.40

3008CEN/TR 14542:2003

Durability of wood and wood-based products - Guidelines for the validity of test results from former standards after their revision Trim. IV

71.100.50

3009CEN/TR 14547:2005 Sampling schemes for third party conformity assessment of fineness in precious metal articles Trim. IV

39.060

3010CEN/TR 14560:2003 Guidance for selection, use, care and maintenance of protective clothing against heat and flame Trim. IV

13.340.10

3011CEN/TR 14568:2003 EN 54 - Fire detection and fire alarm systems - Interpretation of specific clauses of EN 54-2:1997 Trim. IV

13.220.20

3012CEN/TR 14585-2:2006

Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures Trim. IV

23.040.70

3013CEN/TR 14589:2003

Characterization of waste - State of the art document - Chromium VI specification in solid matrices Trim. IV

13.030.10

3014CEN/TR 1459-6:2015

Rough-terrain trucks - Safety requirements and verification - Part 6: Application of EN ISO 13849-1 to slewing and non-slewing variable-reach rough-terrain truck Trim. IV

53.060

3015 CEN/TR 14599:2005 Terms and definitions for welding purposes in relation with EN 1792 Trim. IV 01.040.25 25.160.10

3016CEN/TR 14715:2004

Safety of machinery - Ionizing radiation emited by machinery - Guidance for the application of technical standards in the design of machinery in order to comply with legislative requirements

Trim. IV13.220.10

3017CEN/TR 14723:2003

Durability of wood and wood-based products - Field and accelerated conditioning tests (FACT) for wood preservative out of ground contact Trim. IV

71.100.50

3018CEN/TR 14734:2004

Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method

Trim. IV79.040

3019CEN/TR 14739:2004

Scheme for carrying out a risk assessment for flammable refrigerants in case of household refrigerators and freezers Trim. IV

71.100.45 97.040.30

3020CEN/TR 14740:2004

Chemical used for treatment of water intended for human consumption - Ozone-Production - Guidelines for installations and minimal functional requirements Trim. IV

71.100.80

3021 CEN/TR 14745:2003 Solid Recovered Fuels Trim. IV 13.030.40 75.160.10

3022CEN/TR 14788:2006 Ventilation for buildings - Design and dimensioning of residential ventilation systems Trim. IV

91.140.30

3023CEN/TR 14819-1:2004

Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 1: Funicular railways in tunnels Trim. IV

13.220.20 45.100

Pagina 153 din 170





3024CEN/TR 14819-2:2005

Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations

Trim. IV13.220.20 45.100

3025CEN/TR 14823:2003

Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method Trim. IV

71.100.50 79.040

3026CEN/TR 14839:2004

Wood preservatives - Determination of the preventive efficacy against wood destroying basidiomycetes fungi Trim. IV

71.100.50

3027CEN/TR 14922:2004 Portable fire extinguishers - Model laboratory - Report in compliance with EN 3-7 Trim. IV

13.220.10

3028CEN/TR 14980:2004

Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF Trim. IV

75.160.40

3029CEN/TR 15003:2012

Durability of wood and wood-based products - Criteria for hot air processes for curative uses against wood destroying organisms Trim. IV

79.040

3030CEN/TR 15018:2005 Characterization of waste - Digestion of waste samples using alkali-fusion techniques Trim. IV

13.030.01

3031 CEN/TR 15019:2005 Geotextiles and geotextile-related products - On-site quality control Trim. IV 59.080.70

3032CEN/TR 15046:2005

Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure Trim. IV

71.100.50

3033CEN/TR 15068:2009

Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method Trim. IV

25.160.30

3034CEN/TR 15071:2015 Safety of toys - National translations of warnings and instructions for use in the EN 71 series Trim. IV

97.200.50

3035CEN/TR 15120:2013

Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading Trim. IV

13.300 23.020.20

3036 CEN/TR 15123:2005 Design, preparation and application of internal polymer plastering systems Trim. IV 83.140.99 91.180

3037CEN/TR 15126:2005

Characterization of sludges - Good practice for landfilling of sludges and sludge treatment residues Trim. IV

13.030.20

3038 CEN/TR 15133:2005 Nomenclature - Collective terms and codes for groups of medical devices Trim. IV 01.040.11 11.040.01

3039 CEN/TR 15138:2005 Petroleum products and other liquids - Guide to flash point testing Trim. IV 75.080

3040CEN/TR 15149-3:2014 Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method SMV CEN/TS 15149-3:2012 Trim. IV

75.160.40

3041CEN/TR 15172-1:2005

Whole-body vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery Trim. IV

13.160 17.160

3042CEN/TR 15172-2:2005

Whole-body vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace Trim. IV

13.160 17.160

3043CEN/TR 15175:2006

Characterization of sludges - Protocol for organizing and conducting inter-laboratory tests of methods for chemical and microbiological analysis of sludges

Trim. IV13.030.20

3044CEN/TR 15212:2006

Health informatics - Vocabulary - Maintenance procedure for a web-based terms and concepts database Trim. IV

01.040.35 35.240.80

Pagina 154 din 170





3045CEN/TR 15214-1:2006

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 1: Membrane filtration method for quantification

Trim. IV07.100.99

3046CEN/TR 15214-2:2006

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 2: Miniaturised method (Most Probable Number) by inoculation in liquid medium

Trim. IV07.100.99

3047CEN/TR 15214-3:2006

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 3: Macromethod (Most Probable Number) in liquid medium

Trim. IV07.100.99

3048

CEN/TR 15215-1:2006

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 1: Membrane filtration method for quantitative resuscitation of sub-lethally stressed bacteria (to confirm efficacy of log drop treatment procedures)

Trim. IV

07.100.99

3049

CEN/TR 15215-2:2006

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 2: Liquid enrichment method in selenite-cystine medium followed by Rapport-Vassiliadis for semi-quantitative Most Probable Number (MPN) determination

Trim. IV

07.100.99

3050

CEN/TR 15215-3:2006

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 3: Presence/absence method by liquid enrichment in peptone-novobiocin medium followed by Rapport-Vassiliadis

Trim. IV

07.100.99

3051CEN/TR 15230:2005

Workplace atmospheres - Guidance for sampling of inhalable, thoracic and respirable aerosol fractions Trim. IV

13.040.30

3052CEN/TR 15252:2006 Characterization of sludges - Protocol for validating methods for physical properties of sludges Trim. IV

13.030.20

3053CEN/TR 15276-1:2009

Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components Trim. IV

13.220.20

3054CEN/TR 15276-2:2009

Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance Trim. IV

13.220.20

3055 CEN/TR 15278:2006 Workplace exposure - Strategy for the evaluation of dermal exposure Trim. IV 13.100

3056 CEN/TR 15281:2006 Guidance on Inerting for the Prevention of Explosions Trim. IV 13.230

3057CEN/TR 15310-1:2006

Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions Trim. IV

13.030.10 13.030.20

3058CEN/TR 15310-2:2006

Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques Trim. IV

13.030.10 13.030.20

3059CEN/TR 15310-3:2006

Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field Trim. IV

13.030.10

3060CEN/TR 15310-4:2006

Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery Trim. IV

13.030.10 13.030.20

3061CEN/TR 15310-5:2006

Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan Trim. IV

13.030.10 13.030.20

Pagina 155 din 170





3062CEN/TR 15314:2006

Durability of wood and wood-based products - Quantitative determination of quaternary ammonium compounds in wood Trim. IV

79.080

3063 CEN/TR 15321:2006 Guidelines on the selection, use, care and maintenance of protective clothing Trim. IV 13.340.01

3064CEN/TR 15339-1:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements Trim. IV

25.220.20

3065CEN/TR 15339-3:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units Trim. IV

25.220.20

3066CEN/TR 15339-4:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply Trim. IV

25.220.20

3067CEN/TR 15339-5:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed units Trim. IV

25.220.20

3068CEN/TR 15339-6:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter Trim. IV

25.220.20

3069CEN/TR 15351:2006

Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items Trim. IV

83.080.01

3070CEN/TR 15352:2006

Bitumen and bituminous binders - Development of performance-related specifications: status report 2005 Trim. IV

75.140 91.100.50

3071CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics Trim. IV

13.030.50 83.080.01

3072CEN/TR 15356-1:2006

Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations

Trim. IV13.060.20 23.060.50

3073CEN/TR 15371-1:2015

Safety of toys - Interpretations - Part 1: Replies to requests for interpretation of EN 71-1, EN 71-2, EN 71-8 and EN 71-14 Trim. IV

97.200.50

3074CEN/TR 15371-2:2015

Safety of toys - Interpretations - Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series Trim. IV

97.200.50

3075CEN/TR 15404:2010

Solid recovered fuels - Methods for the determination of ash melting behaviour by using characteristic temperatures Trim. IV

75.160.40

3076CEN/TR 15419:2006

Protective clothing - Guidelines for selection, use, care and maintenance of chemical protective clothing Trim. IV

13.340.10

3077CEN/TR 15438:2007 Plastics piping systems - Guidance for coding of products and their intended uses Trim. IV

23.040.20

3078 CEN/TR 15441:2006 Solid recovered fuels - Guidelines on occupational health aspects Trim. IV 13.100 75.160.40

3079CEN/TR 15444:2006

Transportable gas cylinders - Gas cylinders conforming to the TPED to be used for PED applications - Applicability and justifications Trim. IV

23.020.35

3080 CEN/TR 15449-2:2012 Geographic information - Spatial data infrastructures - Part 2: Best practices Trim. IV 07.040 35.240.70

3081 CEN/TR 15449-3:2012 Geographic information - Spatial data infrastructures - Part 3: Data centric view Trim. IV 07.040 35.240.70

3082CEN/TR 15449-5:2015 Geographic information - Spatial data infrastructures - Part 5: Validation and testing Trim. IV

07.040 35.240.70

3083CEN/TR 15463:2007 Characterization of sludges - Physical consistency - Thixotropic behaviour and piling behaviour Trim. IV

13.030.20

Pagina 156 din 170





3084 CEN/TR 15473:2007 Characterization of sludges - Good practice for sludges drying Trim. IV 13.030.20

3085CEN/TR 15481:2006 Welding of reinforcing steel - Tack weldability - Test methods and performance requirements Trim. IV

25.160.01

3086CEN/TR 15508:2006 Key properties on solid recovered fuels to be used for establishing a classification system Trim. IV

75.160.40

3087CEN/TR 15522-1:2006 Oil spill identification - Waterborne petroleum and petroleum products - Part 1: Sampling Trim. IV

13.020.40

3088CEN/TR 15522-2:2012

Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses

Trim. IV75.080

3089 CEN/TR 15545:2006 Guide to the use of EN 545 Trim. IV 23.040.10 23.040.40

3090CEN/TR 15547:2007

Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics

Trim. IV13.040.30

3091CEN/TR 15563:2007 Temporary works equipment - Recommendations for achieving health and safety Trim. IV

13.100 91.010.99

3092CEN/TR 15584:2007

Characterisation of sludges - Guide to risk assessment especially in relation to use and disposal of sludges Trim. IV

13.030.40

3093CEN/TR 15591:2007 Solid recovered fuels - Determination of the biomass content based on the 14C method Trim. IV

75.160.10

3094 CEN/TR 15642:2011 Unified tests procedures for the tests of EN 3-7:2004+A1:2007 Trim. IV 13.220.10

3095 CEN/TR 15716:2008 Solid recovered fuels - Determination of combustion behaviour Trim. IV 75.160.40

3096CEN/TR 15729:2010

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles

Trim. IV23.040.20

3097CEN/TR 15738:2008

Petroleum products - Heating fuels - Need, feasibility and required deliverables for a common European specification Trim. IV

75.160.20 97.100.40

3098CEN/TR 15745:2015

Liquid petroleum products - Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method - Round Robin research report

Trim. IV75.160.20

3099CEN/TR 15753:2008

Packaging - Package leaflets for medicinal products - Braille and other formats for visually impaired people Trim. IV

11.120.99 11.180.30

3100 CEN/TR 15809:2008 Characterization of sludges - Hygienic aspects - Treatments Trim. IV 13.030.20

3101CEN/TR 15822:2009

Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues Trim. IV

13.030.99 83.080.01

3102 CEN/TR 15831:2009 Method for testing compression in medical hosiery Trim. IV 11.120.20

3103CEN/TR 15874:2009

Railway applications - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009 Trim. IV

17.140.30 93.100

3104CEN/TR 15913:2009 Spectator facilities - Layout criteria for viewing area for spectators with special needs Trim. IV

11.180.01 97.200.10

Pagina 157 din 170





3105CEN/TR 1591-5:2012

Flanges and their joints - Design rules for gasketed circular flange connections - Part 5: Calculation method for full face gasketed joints Trim. IV

23.040.60

3106 CEN/TR 15917:2009 Textiles - Cosmetotextiles Trim. IV 61.020 71.100.70 97.160

3107CEN/TR 15932:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics Trim. IV

01.040 83.080.01

3108CEN/TR 15951:2009

Pyrotechnic articles - Fireworks, category 4 - Overview of harmonized standards that will be developed by CEN/TC 212/WG 2 Trim. IV

71.100.30

3109CEN/TR 15952:2009

Pyrotechnic articles - Theatrical pyrotechnic articles, categories T1 and T2 - Overview of harmonized standards that will be developed by CEN/TC 212/WG 3 Trim. IV

71.100.30

3110CEN/TR 15953:2009

Pyrotechnic articles - Other pyrotechnic articles, category P1 and P2 - Overview of harmonized standards that will be developed by CEN/TC 212/WG 5 Trim. IV

71.100.30

3111CEN/TR 15970:2009

Pyrotechnic articles - Pyrotechnic articles for vehicles - Overview on work program for EN standards to be developed by CEN/TC 212 WG 4 Trim. IV

71.100.30

3112CEN/TR 15985:2010

Thermal insulating products - Factory made products of expanded polystyrene (EPS) - Voluntary certification of the raw material Trim. IV

13.220.50 91.100.01

3113CEN/TR 15996:2010 Hydrometry - Measurement of snow water equivalent using snow mass registration devices Trim. IV

07.060

3114CEN/TR 16013-1:2010

Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 1: Choice of monitor for specific applications Trim. IV

13.040.30

3115CEN/TR 16013-2:2010

Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters

Trim. IV13.040.30

3116CEN/TR 16013-3:2012

Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers

Trim. IV13.040.30

3117 CEN/TR 16017:2010 Guide to the use of EN 598 Trim. IV 23.040.05 23.040.10 23.040.40

3118 CEN/TR 16041:2010 Bicycles - Replies to requests for interpretation of EN 14764 Trim. IV 43.150




3122CEN/TR 16098:2010

Construction products: Assessment of release of dangerous substances - Concept of horizontal testing procedures in support of requirements under the CPD

Trim. IV13.020.99 91.100.01

3123CEN/TR 16099:2010

Fire service equipment - Summary of water pressures specified in published CEN/TC 192 standards Trim. IV

13.220.10

3124CEN/TR 16110:2010 Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste Trim. IV

13.030.01

3125 CEN/TR 16130:2011 Characterization of waste - On-site verification Trim. IV 13.030.10

3126CEN/TR 16148:2011

Head and neck impact, burn and noise injury criteria - A Guide for CEN helmet standards committees Trim. IV

13.340.20

Pagina 158 din 170





3127 CEN/TR 16149:2011 Guidance Document for drafting CEN/TC 158 Standards Trim. IV 13.340.20

3128 CEN/TR 16152:2011 Electronic fee collection - Personalisation and mounting of first mount OBE Trim. IV 43.040.15

3129CEN/TR 16176:2011

Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification Trim. IV

13.030.01

3130 CEN/TR 16184:2011 Characterization of Waste - State-of-the-art document - Analysis of eluates Trim. IV 13.030.99

3131CEN/TR 16193:2013 Sludge, treated biowaste and soil - Detection and enumeration of Escherichia coli Trim. IV

13.030.01

3132 CEN/TR 16208:2011 Biobased products - Overview of standards Trim. IV 13.020.55

3133CEN/TR 16220:2011

Construction products - Assessment of release of dangerous substances - Complement to sampling Trim. IV

13.020.70 91.100.01

3134CEN/TR 16227:2011

Liquid petroleum products - Bio-lubricants - Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants Trim. IV

75.100 75.120

3135CEN/TR 16243:2011

Ambient air quality - Guide for the measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters Trim. IV

13.040.20

3136 CEN/TR 16269:2011 Ambient air - Guide for the measurement of anions and cations in PM2,5 Trim. IV 13.040.20

3137CEN/TR 16298:2011

Textiles and textile products - Smart textiles - Definitions, categorisation, applications and standardization needs Trim. IV

59.080.80

3138CEN/TR 16303-1:2012

Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 1: Common reference information and reporting

Trim. IV13.200 93.080.30

3139CEN/TR 16303-2:2012

Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 2: Vehicle Modelling and Verification

Trim. IV13.200 93.080.30

3140CEN/TR 16303-3:2012

Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 3: Test Item Modelling and Verification

Trim. IV13.200 93.080.30

3141CEN/TR 16303-4:2012

Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 4: Validation Procedures Trim. IV

13.200 93.080.30

3142CEN/TR 16363:2012

Characterization of waste - Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries Trim. IV

13.030.01

3143CEN/TR 16364:2012

Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling

Trim. IV13.060.20

3144 CEN/TR 16365:2012 Characterization of waste - Sampling of waste from extractive industries Trim. IV 13.030.10 73.020

3145CEN/TR 16366:2012

Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Round Robin report on applicability of Rapid Small Scale Oxidation Test method

Trim. IV75.160.20

3146CEN/TR 16376:2012

Characterization of waste - Overall guidance document for characterization of waste from the extractive industries Trim. IV

13.030.01

Pagina 159 din 170





3147CEN/TR 16388:2012

Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle

Trim. IV01.120 13.020.10 91.140.40

3148CEN/TR 16389:2012

Automotive fuels - Paraffinic diesel fuel and blends - Background to the parameters required and their respective limits and determination Trim. IV

75.160.20

3149CEN/TR 16391:2012

Mechanical vibration and shock - Hand-transmitted vibration - Influence of coupling forces at the hand-machine interface on exposure evaluation Trim. IV

13.160

3150 CEN/TR 16394:2014 Characterization of sludges - Protocol for preparing synthetic suspensions Trim. IV 13.030.20

3151 CEN/TR 16394:2014/AC:2Characterization of sludges - Protocol for preparing synthetic suspensions Trim. IV 13.030.20

3152 CEN/TR 16395:2012 Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document Trim. IV 01.040.23 01.040.91 23.040.01

3153CEN/TR 16396:2012

Playground equipment for children - Replies to requests for interpretation of EN 1176:2008 and its parts Trim. IV

97.200.40

3154 CEN/TR 16420:2012 Analytical Method for the Analysis of Propiconazole in treated Wood Samples Trim. IV 79.040

3155 CEN/TR 16422:2012 Classification of thermoregulatory properties Trim. IV 59.080.30

3156CEN/TR 16427:2013

Intelligent transport systems - Public transport - Traveller Information for Visually Impaired People (TI-VIP) Trim. IV

11.180.30

3157 CEN/TR 16467:2013 Playground equipment accessible for all children Trim. IV 97.200.40

3158CEN/TR 16469:2013

Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements Trim. IV

07.060

3159CEN/TR 16470:2013 Environmental aspects of ductile iron pipe systems for water and sewerage applications Trim. IV

23.040.05 23.040.10 23.040.40

3160CEN/TR 16478:2012

Surveillance from first commissioning on measuring devices used in natural gas supply to the installations of the activities under the Directive 2003/87/EC establishing a scheme of CO2 emissions trading

Trim. IV75.180.30

3161 CEN/TR 16512:2015 Child use and care articles - Guidelines for the safety of children’s slings Trim. IV 97.190

3162 CEN/TR 16513:2014 Railway applications - Track - Survey of track geometry quality Trim. IV 93.100

3163CEN/TR 16514:2013

Automotive fuels - Unleaded petrol containing more than 3,7 % (m/m) oxygen - Roadmap, test methods, and requirements for E10+ petrol Trim. IV

75.160.20

3164CEN/TR 16557:2013

Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination Trim. IV

75.160.20 75.160.40

3165CEN/TR 16569:2013 Automotive fuels - Assessing the effects of E10 petrol on vehicle emissions and performance Trim. IV

75.160.20

3166 CEN/TR 16588:2014 Manual measurement of snow water equivalent Trim. IV 07.060

3167 CEN/TR 16589:2013 Laboratory installations - Capture devices with articulated extract arm Trim. IV 71.040.10

3168CEN/TR 16596:2013

Electric-electronic interface between chassis-cab and bodywork of refuse collection vehicles (RCVs) Trim. IV

43.040.15 43.160

3169 CEN/TR 16598:2014 Collection of rationales for EN 1176 - Requirements Trim. IV 97.200.40

3170CEN/TR 16626:2014

Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures Trim. IV

23.040.05 93.030

Pagina 160 din 170





3171CEN/TR 16663:2014

Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method

Trim. IV13.020.30 71.100.50

3172CEN/TR 16680:2014

Liquid petroleum products - Investigation on internal diesel injector sticking deposits mechanisms and the impacts of corrosion inhibitors Trim. IV

75.160.20

3173 CEN/TR 16705:2014 Perimeter protection - Performance classification methodology Trim. IV 13.310

3174CEN/TR 16710-1:2015

Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines Trim. IV

13.110 13.180

3175 CEN/TR 16721:2014 Bio-based products - Overview of methods to determine the bio-based content Trim. IV 13.020.55

3176CEN/TR 16741:2015

Textiles and textile products - Guidance on health and environmental issues related to chemical content of textile products intended for clothing, interior textiles and upholstery

Trim. IV59.080.01

3177CEN/TR 16748:2014

Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting Trim. IV

77.120.10

3178CEN/TR 16749:2014

Aluminium and aluminium alloys - Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast Products Trim. IV

77.120.10

3179 CEN/TR 16787:2014 Industrial Gas Installation - Guideline Trim. IV 23.040.01 91.140.40

3180 CEN/TR 16788:2014 Characterization of sludges - Guideline of good practice for thermal processes Trim. IV 13.030.20

3181CEN/TR 16816:2015

End use performance of wood products - Utilisation and improvement of existing methods to estimate service life Trim. IV

79.080

3182CEN/TR 16823:2015 Railway applications - Driver's cab - Background information on anthropometric data Trim. IV

13.180 45.060.10

3183 CEN/TR 16824:2015 Early care services for babies born with cleft lip and/or palate Trim. IV 11.020.10

3184CEN/TR 16885:2015

Liquid petroleum products - Investigation on test method for measurement of the oxidation stability of diesel and diesel/FAME blends by Acid Number after ageing

Trim. IV75.160.20

3185 CEN/TR 16918:2015 Safety of toys - Children´s mouthing behaviour in contact with toys Trim. IV 97.200.50

3186CEN/TR 614-3:2010 Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery Trim. IV

13.110

3187CEN/TS 1071-11:2005

Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula Trim. IV

81.060.30

3188CEN/TS 1099:2007

Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes Trim. IV

79.060.10

3189CEN/TS 1159-4:2004

Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity Trim. IV

81.060.30

3190 CEN/TS 1187:2012 Test methods for external fire exposure to roofs Trim. IV 13.220.50 91.060.20

3191CEN/TS 12037:2003

Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method

Trim. IV71.100.50

3192 CEN/TS 12169:2008 Criteria for the assessment of conformity of a lot of sawn timber Trim. IV 79.040

Pagina 161 din 170





3193CEN/TS 12200-2:2003

Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity Trim. IV

23.040.05

3194CEN/TS 12404:2015

Durability of wood and wood-based products - Assessment of the effectiveness of a masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray - Laboratory method

Trim. IV71.100.50

3195CEN/TS 12666-2:2012

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity Trim. IV

23.040.01 23.040.05 91.140.80

3196CEN/TS 12983-2:2005

Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 2: Further general requirements and specific requirements for ceramic, glass and glass ceramic cookware

Trim. IV97.040.60

3197CEN/TS 12983-3:2007

Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 3: Cookware for use on induction heating sources Trim. IV

97.060

3198CEN/TS 13130-10:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 10: Determination of acrylamide in food simulants Trim. IV

67.250

3199CEN/TS 13130-11:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 11: Determination of 11-aminoundecanoic acid in food simulants

Trim. IV67.250

3200CEN/TS 13130-12:2005

Material and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 12: Determination of 1,3-benzenedimethanamine in food simulants

Trim. IV67.250

3201CEN/TS 13130-13:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 13: Determination of 2,2-bis(4-hydroxyphenyl)propane (Bisphenol A) in food simulants

Trim. IV67.250

3202CEN/TS 13130-14:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 14: Determination of 3,3-bis(3-methyl-4-hydroxyphenyl)-2-indoline in food simulants

Trim. IV67.250

3203CEN/TS 13130-15:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 15: Determination of 1,3-butadiene in food simulants Trim. IV

67.250

3204CEN/TS 13130-17:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics Trim. IV

67.250

3205CEN/TS 13130-19:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 19: Determination of dimethylaminoethanol in food simulants Trim. IV

67.250

3206CEN/TS 13130-21:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 21: Determination of ethylenediamine and hexamethylenediamine in food simulants

Trim. IV67.250

3207CEN/TS 13130-22:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics

Trim. IV67.250

3208CEN/TS 13130-24:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 24: Determination of maleic acid and maleic anhydride in food simulants

Trim. IV67.250

3209CEN/TS 13130-25:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 25: Determination of 4-methyl-1-pentene in food simulants Trim. IV

67.250

Pagina 162 din 170





3210CEN/TS 13130-26:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 26: Determination of 1-octene and tetrahydrofuran in food simulants

Trim. IV67.250

3211CEN/TS 13130-27:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 27: Determination of 2,4,6-triamino-1,3,5-triazine in food simulants

Trim. IV67.250

3212CEN/TS 13130-28:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 28: Determination of 1,1,1-trimethylolpropane in food simulants

Trim. IV67.250

3213CEN/TS 13130-9:2005

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 9: Determination of acetic acid, vinyl ester in food simulants Trim. IV

67.250

3214CEN/TS 13149-3:2007

Public transport - Road vehicle scheduling and control systems - Part 3: WorldFIP message content Trim. IV

35.240.60 43.080.20 45.140

3215CEN/TS 13149-6:2005 Public transport - Road vehicle scheduling and control systems - Part 6: CAN message content Trim. IV

35.240.60 43.040.15 43.080.20

3216CEN/TS 13149-7:2015

Public transport - Road vehicle scheduling and control systems - Part 7: System and Network Architecture Trim. IV

35.240.60 43.040.15

3217CEN/TS 13149-8:2013

Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communication Trim. IV

35.240.60 43.040.15

3218CEN/TS 1329-2:2012

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

Trim. IV23.040.01 91.140.80

3219CEN/TS 13307-2:2009

Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control Trim. IV

79.080

3220 CEN/TS 13388:2015 Copper and copper alloys - Compendium of compositions and products Trim. IV 77.120.30 77.150.30

3221CEN/TS 13649:2014

Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption

Trim. IV13.040.40

3222 CEN/TS 13714:2013 Characterization of sludges - Sludge management in relation to use or disposal Trim. IV 77.060 93.140

3223CEN/TS 13763-27:2003

Explosives for civil uses - Detonators and relays - Part 27: Definitions, methods and requirements for electronic initiation systems Trim. IV

71.100.30

3224CEN/TS 13979-2:2011

Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 2: Cast wheels Trim. IV

45.040

3225CEN/TS 1401-2:2012

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity

Trim. IV23.040.01 23.040.05 23.040.20

3226 CEN/TS 14175-5:2006 Fume cupboards - Part 5: Recommendations for installation and maintenance Trim. IV 71.040.10

3227 CEN/TS 14237:2015 Textiles for healthcare and social services facilities Trim. IV 11.140 59.080.30

3228CEN/TS 14243:2010

Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities

Trim. IV13.030.50 83.160.01

Pagina 163 din 170





3229CEN/TS 14405:2004

Characterization of waste - Leaching behaviour tests - Up-flow percolation test (under specified conditions) Trim. IV

13.030.10

3230 CEN/TS 14416:2014 Geosynthetic barriers - Test method for determining the resistance to roots Trim. IV 59.080.70

3231CEN/TS 14417:2014

Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers Trim. IV

59.080.70

3232CEN/TS 14418:2014

Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers Trim. IV

59.080.70

3233CEN/TS 14425-1:2003

Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1:Guide to test method selection Trim. IV

81.060.30

3234 CEN/TS 14464:2010 Sawn timber - Method for assessment of case-hardening Trim. IV 79.040

3235CEN/TS 14472-1:2003

Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General Trim. IV

97.150

3236CEN/TS 14472-2:2003

Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 2: Textile floor coverings Trim. IV

97.150

3237CEN/TS 14472-3:2003

Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 3: Laminate floor coverings Trim. IV

97.150

3238CEN/TS 14472-4:2003

Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 4: Resilient floor coverings Trim. IV

97.150

3239 CEN/TS 14507-1:2003 Inhalational nitric oxide systems - Part 1: Delivery systems Trim. IV 11.040.10

3240 CEN/TS 14507-2:2003 Inhalational nitric oxide systems - Part 2: Supply systems Trim. IV 11.040.10

3241CEN/TS 1451-2:2012

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity

Trim. IV23.040.20 91.140.80

3242CEN/TS 1452-7:2014

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity

Trim. IV23.040.05 23.040.20 93.030

3243CEN/TS 14541:2013

Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials Trim. IV

23.040.20 23.040.45

3244CEN/TS 1455-2:2012

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity

Trim. IV23.040.20 91.140.80

3245CEN/TS 14578:2013

Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation

Trim. IV23.040.20 83.140.99

3246CEN/TS 14632:2012

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity

Trim. IV23.040.05 91.140.60 91.140.80

3247CEN/TS 14689:2006 Leather - Physical and mechanical tests - Determination of bagginess, creep and relaxation Trim. IV

59.140.30

3248CEN/TS 14793:2005

Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method Trim. IV

13.040.40

Pagina 164 din 170





3249CEN/TS 14807:2013

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines

Trim. IV23.040.01 91.140.60 91.140.80

3250CEN/TS 14966:2005 Wood-based panels - Small scale indicative test methods for certain mechanical properties Trim. IV

79.060.01

3251 CEN/TS 14972:2011 Fixed firefighting systems - Watermist systems - Design and installation Trim. IV 13.220.20

3252CEN/TS 14999:2013 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container Trim. IV

83.180

3253CEN/TS 15022-2:2009 Copper and copper alloys - Determination of tin content - Part 2: Spectrophotometric method Trim. IV

77.120.30

3254CEN/TS 15082:2005

Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test Trim. IV

71.100.50

3255CEN/TS 15083-1:2005

Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 1: Basidiomycetes

Trim. IV79.040

3256CEN/TS 15083-2:2005

Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi

Trim. IV79.040

3257

CEN/TS 15119-1:2008

Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground) - Laboratory method

Trim. IV

13.020.30 71.100.50

3258

CEN/TS 15119-2:2012

Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method

Trim. IV

13.020.30 71.100.50

3259CEN/TS 15122:2005

Surfaces for sports areas - Determination of resistance of synthetic sports surfaces to repeated impact Trim. IV

97.150 97.220.10

3260CEN/TS 1519-2:2012

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylen (PE) - Part 2: Guidance for the assessment of conformity

Trim. IV23.040.20 91.140.80

3261CEN/TS 15223:2008 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems Trim. IV

23.040.01

3262CEN/TS 15256:2005

Protective clothing - Hand, arm, leg, genital and neck protectors for use in ice hockey - Protectors for players other than goalkeepers - Requirements and test methods

Trim. IV13.340.10 97.220.20

3263 CEN/TS 15277:2006 Non-active surgical implants - Injectable implants Trim. IV 11.040.40

3264CEN/TS 15279:2006 Workplace exposure - Measurement of dermal exposure - Principles and methods Trim. IV

13.100

3265CEN/TS 15324:2008

Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode

Trim. IV75.140 91.100.50

Pagina 165 din 170





3266CEN/TS 15325:2008

Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode Trim. IV

75.140 91.100.50

3267CEN/TS 15354:2006

Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation

Trim. IV83.140.10

3268CEN/TS 15364:2006 Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test Trim. IV

13.030.01

3269CEN/TS 15366:2009

Winter and road service area maintenance equipment - Solid absorbents intended for road usage Trim. IV

13.030.40

3270CEN/TS 15397:2006

Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test Trim. IV

71.100.50

3271 CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density Trim. IV 75.160.40

3272 CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes Trim. IV 75.160.40

3273 CEN/TS 15406:2010 Solid recovered fuels - Determination of bridging properties of bulk material Trim. IV 75.160.40

3274 CEN/TS 15412:2010 Solid recovered fuels - Methods for the determination of metallic aluminium Trim. IV 75.160.40

3275CEN/TS 15414-1:2010

Solid recovered fuels - Determination of moisture content using the oven dry method - Part 1: Determination of total moisture by a reference method Trim. IV

75.160.40

3276CEN/TS 15414-2:2010

Solid recovered fuels - Determination of moisture content using the oven dry method - Part 2: Determination of total moisture content by a simplified method

Trim. IV75.160.40

3277CEN/TS 15418:2006

Methods of test for dense refractory products - Guidelines for testing the corrosion of refractories caused by liquids Trim. IV

81.080

3278 CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis Trim. IV 13.040.40 75.160.40

3279CEN/TS 15504:2007

Public transport - Road vehicles - Visible variable passenger information devices inside the vehicle Trim. IV

01.080.10 03.220.20

3280CEN/TS 15518-4:2013

Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment Trim. IV

07.060 13.030.40 35.240.99

3281 CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials Trim. IV 79.060.01

3282CEN/TS 1555-7:2013

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity Trim. IV

23.040.01 91.140.40

3283CEN/TS 15597-2:2012

Winter maintenance equipment - Spreading machines (gritting machines) - Part 2: Requirements for distribution and its test Trim. IV

43.160

3284 CEN/TS 15639:2010 Solid recovered fuels - Determination of mechanical durability of pellets Trim. IV 75.160.40

3285CEN/TS 1565-2:2012

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene-copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity

Trim. IV23.040.20 91.140.80

3286CEN/TS 15656:2015 Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method Trim. IV

77.120.30

Pagina 166 din 170





3287CEN/TS 15658:2007

Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method

Trim. IV81.060.30

3288CEN/TS 1566-2:2012

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity

Trim. IV23.040.20 91.140.80

3289CEN/TS 15674:2007

Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods Trim. IV

13.040.40

3290 CEN/TS 15676:2007 Wood flooring - Slip resistance - Pendulum test Trim. IV 97.150

3291 CEN/TS 15679:2007 Thermal Modified Timber - Definitions and characteristics Trim. IV 01.040.79 79.040

3292CEN/TS 15703-1:2009

Copper and copper alloys - Determination of manganese content - Part 1: Spectrophotometric method Trim. IV

77.040.30 77.120.30

3293 CEN/TS 15717:2008 Parquet flooring - General guideline for installation Trim. IV 97.150

3294CEN/TS 15718:2011 Railway applications - Wheelsets and bogies - Product requirements for cast wheels Trim. IV

45.040

3295CEN/TS 15730:2008

Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006)

Trim. IV13.160 53.100

3296CEN/TS 15790:2008 Animal feeding stuffs - PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast) Trim. IV

07.100.30 65.120

3297 CEN/TS 15810:2008 Graphical symbols for use on integrated building automation equipment Trim. IV 01.080.20 91.140.01

3298CEN/TS 15862:2012

Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions

Trim. IV13.030.10

3299CEN/TS 15864:2015

Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)

Trim. IV13.030.10

3300CEN/TS 15866:2009

Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres Trim. IV

81.060.30

3301CEN/TS 15880:2009

Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre push-out method

Trim. IV81.060.30

3302CEN/TS 15881:2009

Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites

Trim. IV81.060.30

3303 CEN/TS 15883:2009 Residential solid fuel burning appliances - Emission test methods Trim. IV 97.100.30

3304CEN/TS 15912:2012

Durability of reaction to fire performance - Classes of fire-retardant treated wood-based product in interior and exterior end use applications Trim. IV

71.100.50

3305CEN/TS 1591-3:2007

Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint Trim. IV

23.040.60

Pagina 167 din 170





3306CEN/TS 15916-1:2011

Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS) Trim. IV

77.120.30

3307CEN/TS 15937:2013 Sludge, treated biowaste and soil - Determination of specific electrical conductivity Trim. IV

13.030.01

3308CEN/TS 15968:2010

Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS

Trim. IV71.040.50 71.080.20

3309CEN/TS 15989:2015

Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings Trim. IV

01.080.20 13.220.10

3310CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates Trim. IV

13.030.50 83.080.01

3311 CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation Trim. IV 13.030.50 83.080.01

3312CEN/TS 16023:2013

Characterization of waste - Determination of gross calorific value and calculation of net calorific value Trim. IV

13.030.01

3313CEN/TS 16115-1:2011

Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses Trim. IV

13.040.20

3314 CEN/TS 16137:2011 Plastics - Determination of bio-based carbon content Trim. IV 83.080.01

3315CEN/TS 16163:2014

Conservation of Cultural Heritage - Guidelines and procedures for choosing appropriate lighting for indoor exhibitions Trim. IV

97.195

3316CEN/TS 16172:2013

Sludge, treated biowaste and soil - Determination of elements using graphite furnace atomic absorption spectrometry (GF-AAS) Trim. IV

13.030.01 13.080.10

3317CEN/TS 16177:2012

Sludge, treated biowaste and soil - Extraction for the determination of extractable ammonia, nitrate and nitrite Trim. IV

13.030.01

3318 CEN/TS 16178:2012 Sludge, treated biowaste and soil - Determination of pharmaceutical products Trim. IV 13.030.01

3319CEN/TS 16181:2013

Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)

Trim. IV13.030.20

3320CEN/TS 16182:2012

Sludge treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS)

Trim. IV13.030.01

3321CEN/TS 16183:2012

Sludge, treated biowaste and soil - Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC-MS) Trim. IV

13.030.01

3322CEN/TS 16188:2012

Sludge, treated biowaste and soil - Determination of elements in aqua regia and nitric acid digests - Flame atomic absorption spectrometry method (FAAS) Trim. IV

13.030.01

3323CEN/TS 16189:2012

Sludge, treated biowaste and soil - Determination of linear alkylbenzene sulfonates (LAS) by high-performance liquid chromatography (HPLC) with fluorescence detection (FLD) or mass selective detection (MS)

Trim. IV13.030.01

3324CEN/TS 16190:2012

Sludge, treated biowaste and soil - Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)

Trim. IV13.030.01

3325CEN/TS 16201:2013 Sludge, treated biowaste and soil - Determination of viable plant seeds and propagules Trim. IV

13.030.01

Pagina 168 din 170





3326 EN 300 328 V2.1.1Sisteme de transmisie de bandă largă.Echipamente pentru transmisii de date funcţionând în banda ISM 2,4 GHz şi utilizând tehnici de modulaţie de bandă largă. Standard armonizat acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3327 EN 300 487 V2.1.2

Sisteme şi staţii de sol pentru sateliţi (SES). Standard armonizat pentru staţii mobile de sol destinate numai recepţiei (ROMES) operând în banda 1,5 GHz ce prevăd comunicaţii de date. Specificaţii de radiofrecvenţă (RF) acoperind cerinţele esenţiale ale articolului 3.2 ale Directivei 2014/53/EU

Trim. IV 33.020

3328 EN 300 698 V2.1.1Emiţatoare radiotelefonice şi receptoare pentru serviciul mobil maritim care funcţionează în benzile VHF utilizate pe căile de apă interioare. Standard armonizat acoperind cerinţele esenţiale ale articolelor 3.2 şi 3.3(g) ale Directivei 2014/53/EU

Trim. IV 33.020

3329 EN 301 426 V2.1.2

Sisteme şi staţii terestre pentru sateliţi (SES). Standard armonizat pentru staţiile mobile terestre pentru sateliţi (LMES) cu rată mică de date şi staţiile mobile maritime pentru sateliţi (MMES) care nu sunt destinate comunicaţiilor în caz de oprire şi siguranţă, ce operează în benzile de frecvenţe 1,5 GHz/1,6 GHz, acoperind cerinţele esenţiale ale articolului 3.2 din directiva 2014/53/EU

Trim. IV 33.020

3330 EN 301 444 V2.1.2Sisteme şi staţii de sol pentru sateliţi (SES). Standard armonizat pentru staţii de sol mobile terestre (LMES) care funcţionează în benzile de 1,5 GHz şi 1,6 GHz oferind comunicaţii de voce şi/ sau date, acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3331 EN 301 473 V2.1.2

Sisteme şi staţii terestre de satelit (SES). Standard armonizat pentru staţii terestre pentru aviaţie (AES) care asigură serviciul mobil aeronautic prin satelit (AMSS)/serviciul mobil prin satelit (MSS) şi/sau serviciul mobil aeronautic prin satelit, pe rute stabilite (AMS(R)S)/ serviciul mobil prin satelit (MSS), şi funcţionează în banda de frecvenţe sub 3 GHz acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3332 EN 301 559 V2.1.1

Dispozitive de distanţă mică (SRD). Implanturi medicale active de mică putere (LP-AMI) şi periferice asociate (LP-AMI-P) funcţionând în domeniul de frecvenţe de la 2 483,5 MHz până la 2 500 MHz. Standard armonizat acoperind cerinţele esenţiale ale Articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3333 EN 301 681 V2.1.2

Sisteme şi staţii terestre de satelit (SES). Standard armonizat pentru staţiile mobile terestre (MES) ale sistemelor mobile de sateliţi geostaţionari, inclusiv staţiile terestre ţinute în mână, pentru reţelele de comunicaţii personale prin satelit (SPCN) funcţionând în benzile de frecvenţă 1,5 GHz şi 1,6 GHz ale serviciului mobil prin satelit (MSS), acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3334 EN 301 841-3 V2.1.1Legătură VHF digitală (VDL) sol-aer Mod 2. Caracteristici tehnice şi metode de măsurare pentru echipamentele dispuse la sol. Partea 3: Standard armonizat acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

Pagina 169 din 170





3335 EN 301 842-5 V2.1.1Echipamente radio pentru legătură VHF digitală (VDL) sol-aer Mod 4. Caracteristici tehnice şi metode de măsurare pentru echipamentele dispuse la sol. Partea 5: Standard armonizat acoperind cerinţele esenţiale ale Articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3336 EN 301 908-10 V4.2.2

Compatibilitate electromagnetică şi probleme ale spectrului radio (ERM). Staţii de bază (BS), repetoare şi echipamente de utilizator (UE) pentru reţele celulare de a treia generaţie IMT-2000. Partea 10: Standard armonizat pentru IMT – 2000, FDMA/TDMA (DECT) acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3337 EN 302 054-2 V1.2.1Ajutoare meteorologice (Met Aids). Radiosonde a fi utilizate în domeniul de frecvenţă de la 400,15 MHz până la 406 MHz cu niveluri de putere ajungând până la 200 mW. Partea 2: Standard armonizat acoperind cerinţele esenţiale ale Articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3338 EN 302 454-2 V1.2.1Auxiliare meteorologice (Met Aids). Radiosonde folosite în domeniul de frecvenţă de la 1 668,4 MHz până la 1 690 MHz. Partea 2: EN armonizat acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3339 EN 302 537 V2.1.1

Sisteme de operare de foarte mică putere pentru informaţii medicale (MEDS), destinate a fi utilizate în domeniul de frecvenţe de la 401 MHz până la 402 MHz şi de la 405 MHz până la 406 MHz. Standard armonizat acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3340 EN 302 617-2 V2.1.1Emiţătoare, receptoare şi emiţătoarereceptoare radio UHF la sol pentru serviciu mobil aeronautic UHF utilizând modulaţia în amplitudine. Partea 2: EN armonizat acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/ 53/EU

Trim. IV 33.020

3341 EN 302 885 V2.1.1Echipamente de radiotelefonie portabile de foarte înaltă frecvenţă (VHF) pentru serviciul mobil maritim, operând în benzile VHF, cu suport de mână integrat, clasa D DSC. Standard armonizat acoperind cerinţele esenţiale ale articolului 3.2 şi 3.3(g) al Directivei 2014/ 53/EU

Trim. IV 33.020

3342 EN 303 098 V2.1.1Dispozitive de localizare maritime de putere mică implicând sistemul automat de identificare AIS. Standard armonizat acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/53/EU

Trim. IV 33.020

3343 EN 303 135 V2.1.1Compatibilitate electromagnetică şi probleme ale spectrului radio (ERM). Supraveghere de coastă. Servicii de trafic maritim şi radare portuare (CS/VTS/ HR). EN armonizat acoperind cerinţele esenţiale ale articolului 3.2 din Directiva 2014/53/EU

Trim. IV 33.020

3344 EN 303 213-6-1 V2.1.1

Sistem avansat de comandă şi ghidare pentru deplasare pe suprafaţă (ASMGCS). Partea 6: Standard armonizat acoperind cerinţele esenţiale ale articolului 3.2 din Directiva 2014/53/EU pentru senzori radar distribuiţi pentru deplasare pe suprafaţă. Sub-partea 1: Senzori de bandă X utilizând semnale în impulsuri şi o putere de emisie până la 100 kW

Trim. IV 33.020

Pagina 170 din 170





3345 EN 303 372-1 V1.1.1

Sisteme şi staţii terestre pentru sateliţi (SES). Echipament de recepţie pentru difuzare prin satelit. Standard armonizat acoperind cerinţele esenţiale ale articolului 3.2 al directivei 2014/53/ EU. Partea 1: Unitate de recepţie de exterior în banda de frecvenţă de la 10,7 GHz până la 12,75 GHz

Trim. IV 33.020

3346 EN 303 609 V12.5.1Sistem global pentru comunicaţii mobile (GSM). Repetoare GSM. Standard armonizat acoperind cerinţele esenţiale ale articolului 3.2 al Directivei 2014/ 53/EU

Trim. IV 33.020