2
Page 1 of 2 PROJECT TYPE MADE IN USA ± 0.15” Tolerance Manufactured in the U.S.A. alumLEDs CALIFORNIA ACCENT LIGHTING, INC. 2820 E. Gretta Lane, Anaheim, CA 92806 ph. 800.921.CALI (2254) | fx. 714.535.7902 | [email protected] | calilighting.com © CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice. LENS Example: 100 Lumens per Watt. 25% of 100 is 25. 100 - 25 = 75. The Efficacy with Frosted Lens is 75. LIGHT LOSS FACTORS LENS / OPTIC EFFICACY LOSS Clear (CL) 0% 50% Semi-Frosted (SF) 12.5% Optic (15D, 30D, 45D, 60D) 18% 100% Frosted (F) 25% 50% Semi-Frosted Lens Slight Diode Image (SF) 100% Frosted Lens No Diode Image (Line of Light) (F) 2019.12.19 Rev 10 FEATURES APPLICATIONS Under-cabinet and Indirect Lighting LAMP TYPE High, Mid, or Standard Output LEDs (No Mercury) CRI >90 (High, Mid, and Standard Output) LENS Frosted or Semi-Frosted LENGTH Built to Order (Minimum 1’6” Length) CONSTRUCTION Aluminum Extrusion WEIGHT 1.22 lbs per foot MOUNTING Mounting Channel LISTING Dry Location UL1598, CSA C22.2#250.0 UL8750, CSA250 UL2108, CSA C22.2 #9 INSTALLATION Link to Installation Instructions ELECTRICAL DIMMING 0-10V, Forward Phase, DALI MAXIMUM RUN (Line Voltage Integral Drivers) 40’ (1.5W, 2W, 3W, 4W, 5W, 6W, 8W) 26’ (12W) PRIMARY VOLTAGE 120V or 277V SECONDARY VOLTAGE 24VDC DRIVER Integral (Consult factory for remote driver options) TEMPERATURE RATINGS Operating / Startup: -20° to 48°C (-4° to 120°F) Storage: -40° to 76°C (-40° to 170°F) UNDER- CABINET ALS900T END VIEW FEED POINTS End Feed (EF) Bottom Feed (BF) Side Feed (SF) No Feed (NF) Add the following measurement to overall length of fixture: • 0.15” for End Feed cord grip • 0.55” for Side Feed / Bottom Feed cord grip * 1 Integral drivers wattage sized based on length of run. Example: 5’ run x 3 watts per foot = 15 watts. Driver will be sized to 15 watts maximum. Maximum length for line voltage (Integral Driver) Is 320 watts per run. Example: 320 watts ÷ 8 watts per foot = 40 feet max run. * 2 Remote drivers sized based on wattage per length. Example: 10 feet x 8 watts = 80 watts. Driver will be sized based on 80 watts. * 3 Maximum remote driver size for MO and SO is 96 watts. Maximum remote driver size for HO is 50 watts. * 4 No Feed: Power is fed through the back or bottom of fixture by drilling proper sized hole for conduit. * 5 Only available in Forward Phase and Non-Dimming * 6 Rocker Switch and Occupancy Sensor must be in different locations. Example: Switch and Sensor cannot both be center. SERIES OPTICS FINISH CCT LED WATTS PER FOOT DIMMING OUTPUT (EFFICACY) FEED POINT LISTING LUMINAIRE VOLTAGE ROCKER SWITCH* 6 OCC. SENSOR* 6 CORD & PLUG FIXTURE LENGTH ALS900T ALS900T Semi-Frosted Lens (SF) Natural Silver (NA) 2400K (2.4K) 1.5 Watts (1.5W) 0-10V (10V) High Output* 3 (HO) End Feed (EF) Indoor (DRY) 120V Line Voltage* 1 (120V) Rocker Switch Left (RWL) Sensor Left (OCSL) Cord & Plug Left* 5 (CPL) Specify Length 2700K (2.7K) 2 Watts (2W) 0-10V: 100% - .1% (10V-.1%) Frosted Lens: No Pixelation (F) Satin (SA) 3000K (3.0K) 3 Watts (3W) 0-10V: 100% - 1% (10V-1%) Mid Output* 3 (MO) Bottom Feed (BF) Outdoor (DAMP) Sensor Center (OCSC) Silver (SR) 3500K (3.5K) 4 Watts (4W) Forward Phase: 120V Line Voltage (FP) 277V Line Voltage* 1 (277V) Rocker Switch Center (RWC) Cord & Plug Right* 5 (CPR) White (WH) 4000K (4.0K) 5 Watts (5W) Standard Output* 3 (SO) Side Feed (SF) Sensor Right (OCSR) Black (BK) 4500K (4.5K) 6 Watts (6W) DALI Remote Driver (DALI) 5000K (5.0K) 8 Watts (8W) No Feed* 4 (NF) 24V-120V Remote Driver* 2 (24-120V) Rocker Switch Right (RWR) Leave Blank for None 5700K (5.7K) 12 Watts (12W) JA8 0-10V Remote Driver (JA8-10V) See Next Page for Efficacy Red (R) Green (G) Leave Blank for Non-Dimming 24V-277V Remote Driver* 2 (24-277V) Leave Blank for None Blue (B) - - - - - - - - - - - - - 1.38” 3.60” Semi-Frosted Lens (ALS900T-SF) Aluminum Extrusion (ALS900T) 6’ Power Lead (ALS900T-PC) End Cap (ALS900T-EC) Removable Top Cover (ALS900T-TC) LED (Included)

Page 1 of 2 ALS UNDER-CALI reserves the right to make changes or withdraw specifications without prior notice. LAMP SPECIFICATIONS LAMP NMBER CORRELATED COLOR TEMPERATRE EFFICACY (LMENS

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Page 1 of 2 ALS UNDER-CALI reserves the right to make changes or withdraw specifications without prior notice. LAMP SPECIFICATIONS LAMP NMBER CORRELATED COLOR TEMPERATRE EFFICACY (LMENS

Page 1 of 2

PROJECT TYPE

MA D E I N USA

± 0.15” Tolerance

Manufactured in the U.S.A.alumLEDs™CALIFORNIA ACCENT LIGHTING, INC.

2820 E. Gretta Lane, Anaheim, CA 92806ph. 800.921.CALI (2254) | fx. 714.535.7902 | [email protected] | calilighting.com© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.

LENS

Example: 100 Lumens per Watt. 25% of 100 is 25. 100 - 25 = 75. The Efficacy with Frosted Lens is 75.

LIGHT LOSS FACTORS

LENS / OPTIC EFFICACY LOSS

Clear (CL) 0%

50% Semi-Frosted (SF) 12.5%

Optic (15D, 30D, 45D, 60D) 18%

100% Frosted (F) 25%

50% Semi-Frosted LensSlight Diode Image(SF)

100% Frosted LensNo Diode Image (Line of Light)(F)

2019.12.19 Rev 10

FEATURES

APPLICATIONS Under-cabinet and Indirect Lighting

LAMP TYPE High, Mid, or Standard Output LEDs (No Mercury)

CRI >90 (High, Mid, and Standard Output)

LENS Frosted or Semi-Frosted

LENGTH Built to Order (Minimum 1’6” Length)

CONSTRUCTION Aluminum Extrusion

WEIGHT 1.22 lbs per foot

MOUNTING Mounting Channel

LISTING

Dry LocationUL1598, CSA C22.2#250.0UL8750, CSA250UL2108, CSA C22.2 #9

INSTALLATION Link to Installation Instructions

ELECTRICAL

DIMMING 0-10V, Forward Phase, DALI

MAXIMUM RUN(Line Voltage Integral Drivers)

40’ (1.5W, 2W, 3W, 4W, 5W, 6W, 8W)26’ (12W)

PRIMARY VOLTAGE 120V or 277V

SECONDARY VOLTAGE 24VDC

DRIVER Integral (Consult factory for remote driver options)

TEMPERATURE RATINGSOperating / Startup: -20° to 48°C (-4° to 120°F)

Storage: -40° to 76°C (-40° to 170°F)

UNDER-CABINETALS900T

END VIEW

FEED POINTS

End Feed(EF)

Bottom Feed(BF)

Side Feed(SF)

No Feed(NF)

Add the following measurement to overall length of fixture:• 0.15” for End Feed cord grip• 0.55” for Side Feed / Bottom Feed cord grip

*1 Integral drivers wattage sized based on length of run. Example: 5’ run x 3 watts per foot = 15 watts. Driver will be sized to 15 watts maximum. Maximum length for line voltage (Integral Driver) Is 320 watts per run. Example: 320 watts ÷ 8 watts per foot = 40 feet max run.*2 Remote drivers sized based on wattage per length. Example: 10 feet x 8 watts = 80 watts. Driver will be sized based on 80 watts.*3 Maximum remote driver size for MO and SO is 96 watts. Maximum remote driver size for HO is 50 watts.

*4 No Feed: Power is fed through the back or bottom of fixture by drilling proper sized hole for conduit.*5 Only available in Forward Phase and Non-Dimming*6 Rocker Switch and Occupancy Sensor must be in different locations. Example: Switch and Sensor cannot both be center.

SERIES OPTICS FINISH CCT LED WATTSPER FOOT DIMMING OUTPUT

(EFFICACY)FEED POINT LISTING LUMINAIRE

VOLTAGEROCKERSWITCH*6

OCC.SENSOR*6

CORD& PLUG

FIXTURE LENGTH

ALS900T

ALS900T Semi-Frosted Lens(SF)

Natural Silver (NA)

2400K (2.4K) 1.5 Watts (1.5W) 0-10V (10V) High Output*3

(HO)End Feed(EF)

Indoor(DRY)

120V Line Voltage*1

(120V)

Rocker SwitchLeft(RWL)

Sensor Left(OCSL)

Cord & PlugLeft*5

(CPL)

Specify Length2700K (2.7K) 2 Watts (2W) 0-10V: 100% - .1% (10V-.1%)

Frosted Lens:No Pixelation(F)

Satin (SA) 3000K (3.0K) 3 Watts (3W) 0-10V: 100% - 1% (10V-1%) Mid Output*3

(MO)Bottom Feed(BF)

Outdoor(DAMP)

Sensor Center(OCSC)Silver (SR) 3500K (3.5K) 4 Watts (4W) Forward Phase:

120V Line Voltage (FP)277V Line Voltage*1

(277V)

Rocker SwitchCenter(RWC)

Cord & PlugRight*5

(CPR)White (WH) 4000K (4.0K) 5 Watts (5W) Standard

Output*3

(SO)

Side Feed(SF)

Sensor Right(OCSR)Black (BK) 4500K (4.5K) 6 Watts (6W) DALI Remote Driver

(DALI)5000K (5.0K) 8 Watts (8W) No Feed*4

(NF)24V-120VRemote Driver*2

(24-120V)

Rocker Switch Right(RWR)

Leave Blankfor None5700K (5.7K) 12 Watts (12W) JA8 0-10V Remote Driver

(JA8-10V)See Next Page for EfficacyRed (R)

Green (G) Leave Blank for Non-Dimming 24V-277VRemote Driver*2

(24-277V)

Leave Blankfor NoneBlue (B)

- - - - - - - - - - - - -

1.38”

3.60”

Semi-Frosted Lens(ALS900T-SF)

Aluminum Extrusion(ALS900T)

6’ Power Lead(ALS900T-PC)

End Cap(ALS900T-EC)

Removable Top Cover(ALS900T-TC)

LED(Included)

Page 2: Page 1 of 2 ALS UNDER-CALI reserves the right to make changes or withdraw specifications without prior notice. LAMP SPECIFICATIONS LAMP NMBER CORRELATED COLOR TEMPERATRE EFFICACY (LMENS

Page 2 of 2

Manufactured in the U.S.A.alumLEDs™CALIFORNIA ACCENT LIGHTING, INC.

2820 E. Gretta Lane, Anaheim, CA 92806ph. 800.921.CALI (2254) | fx. 714.535.7902 | [email protected] | calilighting.com© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.

LAMP SPECIFICATIONS

LAMPNUMBER

CORRELATEDCOLOR TEMPERATURE

EFFICACY (LUMENS / WATT)L70 LED LIFEHIGH

OUTPUTMID OUTPUT

STANDARD OUTPUT

2.4K 2400K Incandescent White 120 95 85 60,000 hrs.

2.7K 2700K Warm White 120 95 85 60,000 hrs.

3.0K 3000K Warm White 120 95 90 60,000 hrs.

3.5K 3500K Neutral White 120 95 90 60,000 hrs.

4.0K 4000K Neutral White 120 95 90 60,000 hrs.

4.5K 4500K Neutral White 120 95 90 60,000 hrs.

5.0K 5000K Cool White 130 99 95 60,000 hrs.

5.7K 5700K Cool White 130 99 95 60,000 hrs.

R Red (621nm) 70 N/A N/A 40,000 hrs.

G Green (525nm) 139 N/A N/A 40,000 hrs.

B Blue (470nm) 40 N/A N/A 40,000 hrs.

Consult factory for cooler white color temperatures.

ACCESSORIES (Sold Separately)

2019.12.19 Rev 10

UNDER-CABINETALS900T

DESIGN GUIDELINES

PART NUMBER WEIGHT SPECIFY LENGTH / LOCATION

SPECIFY QUANTITY UNIT

ALS900T-EC 0.031 lbs each N/A Each

ALS900T-ECK 0.028 lbs each N/A Each

ALS900T-PP-6’ 0.242 lbs N/A Each

ALS900T-PP-X 0.122 lbs per foot Each

ALS900T-JC-6” 0.152 lbs each N/A Each

ALS900T-JC-X Varies by Length Each

Occupancy Sensor(ALS900T-OCSX)(X = Specify Location)

Center(OCSC)

Right(OCSR)Left

(OCSL)

Rocker Switch(ALS900T-RWX)(X = Specify Location)

Center(RWC)

Right(RWR)Left

(RWL)

Detail CContinuous Connection (Dry Location)

Detail AMale Disconnects(Dry Location)

Detail BJumper Cable(ALS900T-JC-X)(X = Specify Length)

End Cap(ALS900T-EC)

End Cap with Knockout(ALS900T-ECK)

Each fixture is provided with female and male disconnects.Disconnects are internal and used to plug and play multiple lengths and accessories. No wiring or cords are exposed.

Standard Jumper Cable(ALS900T-JC-6”)

Jumper Cable(ALS900T-JC-X)(X = Specify Length)

Standard Power Cord & Plug(ALS900T-PP-6’)

Power Cord & Plug(ALS900T-PP-X)(X = Specify Length, Max. 9’)

Individual FixtureUp to 8’

Individual Fixture with Disconnects

Detail A

Fixture with Jumper CablesSpecify Length

Detail B

Continuous Run

Detail C

8’ 8’ 4’20’